void sendEnvironmentPacket(const SharedNodePointer& node, AudioMixerClientData& data) {
bool hasReverb = false;
float reverbTime, wetLevel;
auto& reverbSettings = AudioMixer::getReverbSettings();
auto& audioZones = AudioMixer::getAudioZones();
AvatarAudioStream* stream = data.getAvatarAudioStream();
glm::vec3 streamPosition = stream->getPosition();
// find reverb properties
for (int i = 0; i < reverbSettings.size(); ++i) {
AABox box = audioZones[reverbSettings[i].zone];
if (box.contains(streamPosition)) {
hasReverb = true;
reverbTime = reverbSettings[i].reverbTime;
wetLevel = reverbSettings[i].wetLevel;
break;
}
}
// check if data changed
bool dataChanged = (stream->hasReverb() != hasReverb) ||
(stream->hasReverb() && (stream->getRevebTime() != reverbTime || stream->getWetLevel() != wetLevel));
if (dataChanged) {
// update stream
if (hasReverb) {
stream->setReverb(reverbTime, wetLevel);
} else {
stream->clearReverb();
}
}
// send packet at change or every so often
float CHANCE_OF_SEND = 0.01f;
bool sendData = dataChanged || (randFloat() < CHANCE_OF_SEND);
if (sendData) {
// size the packet
unsigned char bitset = 0;
int packetSize = sizeof(bitset);
if (hasReverb) {
packetSize += sizeof(reverbTime) + sizeof(wetLevel);
}
// write the packet
auto envPacket = NLPacket::create(PacketType::AudioEnvironment, packetSize);
if (hasReverb) {
setAtBit(bitset, HAS_REVERB_BIT);
}
envPacket->writePrimitive(bitset);
if (hasReverb) {
envPacket->writePrimitive(reverbTime);
envPacket->writePrimitive(wetLevel);
}
// send the packet
DependencyManager::get<NodeList>()->sendPacket(std::move(envPacket), *node);
}
}
void AudioMixer::sendAudioEnvironmentPacket(SharedNodePointer node) {
// Send stream properties
bool hasReverb = false;
float reverbTime, wetLevel;
// find reverb properties
for (int i = 0; i < _zoneReverbSettings.size(); ++i) {
AudioMixerClientData* data = static_cast<AudioMixerClientData*>(node->getLinkedData());
glm::vec3 streamPosition = data->getAvatarAudioStream()->getPosition();
AABox box = _audioZones[_zoneReverbSettings[i].zone];
if (box.contains(streamPosition)) {
hasReverb = true;
reverbTime = _zoneReverbSettings[i].reverbTime;
wetLevel = _zoneReverbSettings[i].wetLevel;
// Modulate wet level with distance to wall
float MIN_ATTENUATION_DISTANCE = 2.0f;
float MAX_ATTENUATION = -12; // dB
glm::vec3 distanceToWalls = (box.getDimensions() / 2.0f) - glm::abs(streamPosition - box.calcCenter());
float distanceToClosestWall = glm::min(distanceToWalls.x, distanceToWalls.z);
if (distanceToClosestWall < MIN_ATTENUATION_DISTANCE) {
wetLevel += MAX_ATTENUATION * (1.0f - distanceToClosestWall / MIN_ATTENUATION_DISTANCE);
}
break;
}
}
AudioMixerClientData* nodeData = static_cast<AudioMixerClientData*>(node->getLinkedData());
AvatarAudioStream* stream = nodeData->getAvatarAudioStream();
bool dataChanged = (stream->hasReverb() != hasReverb) ||
(stream->hasReverb() && (stream->getRevebTime() != reverbTime ||
stream->getWetLevel() != wetLevel));
if (dataChanged) {
// Update stream
if (hasReverb) {
stream->setReverb(reverbTime, wetLevel);
} else {
stream->clearReverb();
}
}
// Send at change or every so often
float CHANCE_OF_SEND = 0.01f;
bool sendData = dataChanged || (randFloat() < CHANCE_OF_SEND);
if (sendData) {
auto nodeList = DependencyManager::get<NodeList>();
unsigned char bitset = 0;
int packetSize = sizeof(bitset);
if (hasReverb) {
packetSize += sizeof(reverbTime) + sizeof(wetLevel);
}
auto envPacket = NLPacket::create(PacketType::AudioEnvironment, packetSize);
if (hasReverb) {
setAtBit(bitset, HAS_REVERB_BIT);
}
envPacket->writePrimitive(bitset);
if (hasReverb) {
envPacket->writePrimitive(reverbTime);
envPacket->writePrimitive(wetLevel);
}
nodeList->sendPacket(std::move(envPacket), *node);
}
}
/*
* Tries to load vmap and tilemap for a gridtile and creates a navmesh for it.
*
*/
bool
ModelContainerView::generateMoveMapForTile (int pMapId, int x, int y)
{
bool result = iVMapManager.loadMap (gVMapDataDir.c_str (), pMapId, x, y) == VMAP_LOAD_RESULT_OK;
if (result == VMAP_LOAD_RESULT_OK)
{
//VMap loaded. Add data from vmap to global Triangle-Array
parseVMap (pMapId, x, y);
}
// Add data from Height-Map to global Triangle-Array
generateHeightMap(pMapId,x,y);
// We will now add all triangles inside the given zone to the vectormap.
// We could also do additional checks here.
double x_max = (32-x)*SIZE_OF_GRIDS + 50;
double y_max = (32-y)*SIZE_OF_GRIDS + 50;
double x_min = x_max - SIZE_OF_GRIDS - 100;
double y_min = y_max - SIZE_OF_GRIDS - 100;
Vector3 low = Vector3(x_min,y_min,-inf());
Vector3 high = Vector3(x_max,y_max,inf());
AABox checkBox = AABox(low,high);
AABox check;
Triangle t;
//each triangle has mangos format.
for (int i = 0; i < globalTriangleArray.size(); i++) {
t = globalTriangleArray[i];
t.getBounds(check);
if (checkBox.contains(check)) {
// Write it down in detour format.
iGlobArray.append(t.vertex(0).y,t.vertex(0).z,t.vertex(0).x);
iGlobArray.append(t.vertex(1).y,t.vertex(1).z,t.vertex(1).x);
iGlobArray.append(t.vertex(2).y,t.vertex(2).z,t.vertex(2).x);
}
}
if (iGlobArray.size() == 0) {
printf("No models - check your mmap.datadir in your config");
return true;
}
if(gMakeObjFile)
debugGenerateObjFile(); // create obj file for Recast Demo viewer
//return true;
float bmin[3], bmax[3];
/*
* The format looks like this
* Verticle = float[3]
* Triangle = Verticle[3]
* So there are
* array.size() floats
* that means there are
* nverts = array.size()/3 Verticles
* that means there are
* ntris = nverts/3
*/
//array/3 verticles
const int nverts = iGlobArray.size()/3; // because 1 vert is 3 float.
// -> vert = float[3]
const float* verts = iGlobArray.getCArray();
rcCalcBounds(verts,nverts,bmin,bmax);
// nverts/3 triangles
// -> Triangle = vert[3] = float[9]
int* tris = new int[nverts];// because 1 triangle is 3 verts
for (int i = 0; i< nverts; i++)
tris[i] = i;
/* tris[i] = 1,2,3;4,5,6;7,8,9;
*
*/
const int ntris = (nverts/3);
rcConfig m_cfg;
//
// Step 1. Initialize build config.
//
// Init build configuration from GUI
memset(&m_cfg, 0, sizeof(m_cfg));
// Change config settings here!
m_cfg.cs = 0.3f;
m_cfg.ch = 0.2f;
m_cfg.walkableSlopeAngle = 50.0f;
m_cfg.walkableHeight = 10;
m_cfg.walkableClimb = 4;
m_cfg.walkableRadius = 2;
m_cfg.maxEdgeLen = (int)(12 / 0.3f);
m_cfg.maxSimplificationError = 1.3f;
m_cfg.minRegionSize = (int)rcSqr(50);
m_cfg.mergeRegionSize = (int)rcSqr(20);
m_cfg.maxVertsPerPoly = (int)6;
m_cfg.detailSampleDist = 1.8f;
m_cfg.detailSampleMaxError = 0.2f * 1;
bool m_keepInterResults = false;
printf("CellSize : %.2f\n",m_cfg.cs);
printf("CellHeight : %.2f\n",m_cfg.ch);
printf("WalkableSlope : %.2f\n",m_cfg.walkableSlopeAngle);
printf("WalkableHeight : %i\n",m_cfg.walkableHeight);
printf("walkableClimb : %i\n",m_cfg.walkableClimb);
printf("walkableRadius : %i\n",m_cfg.walkableRadius);
printf("maxEdgeLen : %i\n",m_cfg.maxEdgeLen);
printf("maxSimplific.Er.: %.2f\n",m_cfg.maxSimplificationError);
printf("minRegionSize : %i\n",m_cfg.minRegionSize);
printf("mergedRegSize : %i\n",m_cfg.mergeRegionSize);
printf("maxVertsPerPoly : %i\n",m_cfg.maxVertsPerPoly);
printf("detailSampledist: %.2f\n",m_cfg.detailSampleDist);
printf("det.Samp.max.err: %.2f\n",m_cfg.detailSampleMaxError);
// Set the area where the navigation will be build.
// Here the bounds of the input mesh are used, but the
// area could be specified by an user defined box, etc.
vcopy(m_cfg.bmin, bmin);
vcopy(m_cfg.bmax, bmax);
rcCalcGridSize(m_cfg.bmin, m_cfg.bmax, m_cfg.cs, &m_cfg.width, &m_cfg.height);
//
// Step 2. Rasterize input polygon soup.
//
// Allocate voxel heighfield where we rasterize our input data to.
rcHeightfield* m_solid = new rcHeightfield;
if (!m_solid)
{
printf("buildNavigation: Out of memory 'solid'.\n");
return false;
}
if (!rcCreateHeightfield(*m_solid, m_cfg.width, m_cfg.height, m_cfg.bmin, m_cfg.bmax, m_cfg.cs, m_cfg.ch))
{
printf("buildNavigation: Could not create solid heightfield.\n");
return false;
}
// Allocate array that can hold triangle flags.
// If you have multiple meshes you need to process, allocate
// and array which can hold the max number of triangles you need to process.
unsigned char* m_triflags = new unsigned char[ntris];
if (!m_triflags)
{
printf("buildNavigation: Out of memory 'triangleFlags' (%d).\n", ntris);
return false;
}
// Find triangles which are walkable based on their slope and rasterize them.
// If your input data is multiple meshes, you can transform them here, calculate
// the flags for each of the meshes and rasterize them.
memset(m_triflags, 0, ntris*sizeof(unsigned char));
rcMarkWalkableTriangles(m_cfg.walkableSlopeAngle, verts, nverts, tris, ntris, m_triflags);
rcRasterizeTriangles(verts, nverts, tris, m_triflags, ntris, *m_solid, m_cfg.walkableClimb);
// should delete [] verts? - probably not, this is just pointer to data in a G3D Array
// should delete [] tris?
if (!m_keepInterResults)
{
delete [] m_triflags;
m_triflags = 0;
}
//
// Step 3. Filter walkables surfaces.
//
// Once all geoemtry is rasterized, we do initial pass of filtering to
// remove unwanted overhangs caused by the conservative rasterization
// as well as filter spans where the character cannot possibly stand.
rcFilterLowHangingWalkableObstacles(m_cfg.walkableClimb, *m_solid);
rcFilterLedgeSpans(m_cfg.walkableHeight, m_cfg.walkableClimb, *m_solid);
rcFilterWalkableLowHeightSpans(m_cfg.walkableHeight, *m_solid);
//
// Step 4. Partition walkable surface to simple regions.
//
// Compact the heightfield so that it is faster to handle from now on.
// This will result more cache coherent data as well as the neighbours
// between walkable cells will be calculated.
rcCompactHeightfield* m_chf = new rcCompactHeightfield;
if (!m_chf)
{
printf("buildNavigation: Out of memory 'chf'.\n");
return false;
}
if (!rcBuildCompactHeightfield(m_cfg.walkableHeight, m_cfg.walkableClimb, RC_WALKABLE, *m_solid, *m_chf))
{
printf( "buildNavigation: Could not build compact data.\n");
return false;
}
if (!m_keepInterResults)
{
delete m_solid;
m_solid = 0;
}
// Erode the walkable area by agent radius.
if (!rcErodeArea(RC_WALKABLE_AREA, m_cfg.walkableRadius, *m_chf))
{
printf("buildNavigation: Could not erode.\n");
return false;
}
// (Optional) Mark areas.
//const ConvexVolume* vols = m_geom->getConvexVolumes();
//for (int i = 0; i < m_geom->getConvexVolumeCount(); ++i)
// rcMarkConvexPolyArea(vols[i].verts, vols[i].nverts, vols[i].hmin, vols[i].hmax, (unsigned char)vols[i].area, *m_chf);
// Prepare for region partitioning, by calculating distance field along the walkable surface.
if (!rcBuildDistanceField(*m_chf))
{
printf("buildNavigation: Could not build distance field.\n");
return false;
}
// Partition the walkable surface into simple regions without holes.
if (!rcBuildRegions(*m_chf, m_cfg.borderSize, m_cfg.minRegionSize, m_cfg.mergeRegionSize))
{
printf("buildNavigation: Could not build regions.\n");
}
//
// Step 5. Trace and simplify region contours.
//
// Create contours.
rcContourSet* m_cset = new rcContourSet;
if (!m_cset)
{
printf("buildNavigation: Out of memory 'cset'.\n");
return false;
}
if (!rcBuildContours(*m_chf, m_cfg.maxSimplificationError, m_cfg.maxEdgeLen, *m_cset))
{
printf("buildNavigation: Could not create contours.\n");
return false;
}
//
// Step 6. Build polygons mesh from contours.
//
// Build polygon navmesh from the contours.
rcPolyMesh* m_pmesh = new rcPolyMesh;
if (!m_pmesh)
{
printf("buildNavigation: Out of memory 'pmesh'.\n");
return false;
}
if (!rcBuildPolyMesh(*m_cset, m_cfg.maxVertsPerPoly, *m_pmesh))
{
printf( "buildNavigation: Could not triangulate contours.\n");
return false;
}
//
// Step 7. Create detail mesh which allows to access approximate height on each polygon.
//
rcPolyMeshDetail* m_dmesh = new rcPolyMeshDetail;
if (!m_dmesh)
{
printf("buildNavigation: Out of memory 'pmdtl'.\n");
return false;
}
if (!rcBuildPolyMeshDetail(*m_pmesh, *m_chf, m_cfg.detailSampleDist, m_cfg.detailSampleMaxError, *m_dmesh))
{
printf("buildNavigation: Could not build detail mesh.\n");
}
if (!m_keepInterResults)
{
delete m_chf;
m_chf = 0;
delete m_cset;
m_cset = 0;
}
// At this point the navigation mesh data is ready, you can access it from m_pmesh.
// See duDebugDrawPolyMesh or dtCreateNavMeshData as examples how to access the data.
//
// (Optional) Step 8. Create Detour data from Recast poly mesh.
//
// The GUI may allow more max points per polygon than Detour can handle.
// Only build the detour navmesh if we do not exceed the limit.
if (m_cfg.maxVertsPerPoly <= DT_VERTS_PER_POLYGON)
{
unsigned char* navData = 0;
int navDataSize = 0;
// Update poly flags from areas.
for (int i = 0; i < m_pmesh->npolys; ++i)
{
// for now all generated navmesh is walkable by everyone.
// else there will be no pathfinding at all!
m_pmesh->flags[i] = RC_WALKABLE_AREA;
}
dtNavMeshCreateParams params;
memset(¶ms, 0, sizeof(params));
params.verts = m_pmesh->verts;
params.vertCount = m_pmesh->nverts;
params.polys = m_pmesh->polys;
params.polyAreas = m_pmesh->areas;
params.polyFlags = m_pmesh->flags;
params.polyCount = m_pmesh->npolys;
params.nvp = m_pmesh->nvp;
params.detailMeshes = m_dmesh->meshes;
params.detailVerts = m_dmesh->verts;
params.detailVertsCount = m_dmesh->nverts;
params.detailTris = m_dmesh->tris;
params.detailTriCount = m_dmesh->ntris;
params.offMeshConVerts = 0;
params.offMeshConRad = 0;
params.offMeshConDir = 0;
params.offMeshConAreas = 0;
params.offMeshConFlags = 0;
params.offMeshConCount = 0;
params.walkableHeight = 2.0f;
params.walkableRadius = 0.6f;
params.walkableClimb = 0.9f;
vcopy(params.bmin, m_pmesh->bmin);
vcopy(params.bmax, m_pmesh->bmax);
params.cs = m_cfg.cs;
params.ch = m_cfg.ch;
printf("vertcount : %05u\n",params.vertCount);
printf("polycount : %05u\n",params.polyCount);
printf("detailVertsCount: %05u\n",params.detailVertsCount);
printf("detailTriCount : %05u\n",params.detailTriCount);
printf("walkableClimb : %.2f\n",params.walkableClimb);
printf("walkableRadius : %.2f\n",params.walkableRadius);
printf("walkableHeight : %.2f\n",params.walkableHeight);
if (!dtCreateNavMeshData(¶ms, &navData, &navDataSize))
{
printf("Could not build Detour navmesh.\n");
return false;
}
// navData now contains the MoveMap
printf("Generated Navigation Mesh! Size: %i bytes/ %i kB / %i MB\n",navDataSize,navDataSize/1024,navDataSize/(1024*1024));
char tmp[14];
sprintf(tmp, "%03u%02u%02u.mmap",iMap,ix,iy);
std::string savefilepath = gMMapDataDir + "/" + tmp;
ofstream inf( savefilepath.c_str(),ofstream::binary );
if( inf )
{
inf.write( (char*)( &navData[0] ), navDataSize ) ;
}
printf("MoveMap saved under %s\n", savefilepath.c_str());
delete [] navData;
}
// debugLoadNavMesh();
return (result);
}
