void WGFPBlockDraw::regPropertyDataNames( AcStringArray& names ) const
{
names.append( _T( "绝对瓦斯涌出量" ) );
names.append( _T( "相对瓦斯涌出量" ) );
names.append( _T( "工作面日产量" ) );
names.append( _T( "回采年月" ) );
}
void CDHBlockDraw::regPropertyDataNames( AcStringArray& names ) const
{
names.append( _T( "¿×ºÅ" ) );
names.append( _T( "µØÃæ±ê¸ß" ) );
names.append( _T( "ú²ãµ×°å±ê¸ß" ) );
names.append( _T( "úºñ" ) );
}
static void GetDatasFromList(const CGridListCtrlGroups& listCtrl,AcStringArray& strName,AcStringArray& strIsRunning,AcStringArray& strReason,int num)
{
for(size_t i = 0; i < num; i++)
{
CString name = listCtrl.GetItemText(i,1);
if (name.IsEmpty())
{
name = ISNULL;
}
strName.append(name);
CString isRunning = listCtrl.GetItemText(i,2);
if (isRunning.IsEmpty())
{
isRunning = ISNULL;
}
strIsRunning.append(isRunning);
CString reason = listCtrl.GetItemText(i,3);
if (reason.IsEmpty())
{
reason = ISNULL;
}
strReason.append(reason);
//acutPrintf(_T("\n第%d行数据:%s\t%s\t%s"),i+1,strName,isRunning,strReason);
}
}
void CSDCIBlockDraw::regPropertyDataNames( AcStringArray& names ) const
{
names.append( _T( "瓦斯放散初速度" ) );
names.append( _T( "煤的坚固性系数" ) );
// 实际只有2个字段，该字段并不存在!!!
// 注册一个不存在的字段，返回值为""
names.append( _T( "瓦斯突出危险性综合指标K值" ) );
}
void ReportDataHelper::WriteDatas( const CString& name,const ArrayVector& datas )
{
AcDbObjectId objId;
GDESDataObjectHelper::GetObjectId(name,objId);
AcStringArray values;
for(int i = 0; i < datas[0].length();i++)
{
for(int j = 0; j < datas.size(); j++)
{
values.append(datas[j][i]);
values.append(_T("$"));
}
}
SetObjectDatas(objId,values);
}
static BOOL ReadTableDatas(const CString& itemName,AcStringArray& names,AcStringArray& datas)
{
names.removeAll();
datas.removeAll();
ArrayVector dataVector;
ReportDataHelper::ReadDatas(itemName,dataVector,2);
if(dataVector.empty()) return FALSE;
for(int i = 0; i < dataVector.size(); i++)
{
names.append(dataVector[i][0]);
datas.append(dataVector[i][1]);
}
return TRUE;
}
static CString ExcludePath( const CString& supportPath, const CString& arxPath )
{
AcStringArray cc;
SplitCString( supportPath, _T( ";" ), cc );
AcStringArray paths;
int n = cc.length();
for( int i = 0; i < n; i++ )
{
if( cc[i].compareNoCase( arxPath ) == 0 ) continue;
paths.append( cc[i] );
}
CString path;
n = paths.length();
for( int i = 0; i < n; i++ )
{
if( i == n - 1 )
{
path.AppendFormat( _T( "%s" ), paths[i].kACharPtr() );
}
else
{
path.AppendFormat( _T( "%s;" ), paths[i].kACharPtr() );
}
}
return path;
}
void ReportDataHelper::ReadDatas( const CString& name, ArrayVector& datasVector,int unitCount )
{
AcStringArray getDatas;
AcDbObjectId objId;
GDESDataObjectHelper::GetObjectId(name,objId);
GetObjectDatas(objId,getDatas);
//AcStringArray strName,strIsRunning,strReason;
ArrayVector datas;
int nCount = getDatas.length();
if(nCount <= 0) return;
datas.resize( unitCount );
for(int i = 0; i < nCount; i = i+2 )
{
int j = (i/2)% unitCount;
datas[j].append(getDatas[i]);
}
datasVector.clear();
for(int i = 0; i < nCount / (2 * unitCount); i++)
{
CString temp;
AcStringArray temps;
for(int j = 0; j < unitCount; j++)
{
temp.Format(_T("%s"),datas[j][i].kACharPtr());
if(temp == ISNULL) temp = _T("");
temps.append(temp);
}
datasVector.push_back(temps);
}
}
// 查找从根类型派生的图元
void ArxClassHelper::GetArxClassTypes( const CString& root, AcStringArray& types, bool findAbstractType )
{
// 如果根类型不存在，默认为AcDbObject
AcRxClass* pParentClass = AcRxClass::cast( acrxClassDictionary->at( root ) );
if( pParentClass == 0 ) pParentClass = AcDbObject::desc();
AcRxDictionaryIterator* iter = acrxClassDictionary->newIterator();
if( iter == 0 ) return;
for( ; !iter->done(); iter->next() )
{
AcRxClass* pClass;
if( ( pClass = AcRxClass::cast( iter->object() ) ) != NULL )
{
if( pClass->isDerivedFrom( pParentClass ) )
{
const ACHAR* text = pClass->name();
if( text == NULL ) continue;
if( !findAbstractType && ( pClass->dxfName() == NULL ) || ( pClass->appName() == NULL ) ) continue;
//acutPrintf(_T("appName:%s\ndxfName:%s\nname:%s\n"), pClass->appName(), pClass->dxfName(), pClass->name());
types.append( text );
}
}
}
delete iter;
}
static BOOL ReadDataFromFile(const CString& txtName,AcStringArray& names,AcStringArray& isRunings,AcStringArray& resons)
{
names.removeAll();
isRunings.removeAll();
resons.removeAll();
ArrayVector dataVector;
ReportDataHelper::ReadDatas(txtName,dataVector,3);
if(dataVector.empty()) return FALSE;
for(int i = 0; i < dataVector.size(); i++)
{
names.append(dataVector[i][0]);
isRunings.append(dataVector[i][1]);
resons.append(dataVector[i][2]);
}
return TRUE;
}
bool IntStrListHelper::GetIntStrList( const CString& name, AcDbIntArray& intList, AcStringArray& strList )
{
AcStringArray entries;
if( !ArxDictHelper::GetAllEntries( INT_LIST_DICT, name, entries ) ) return false;
int len = entries.length();
bool ret = ( len > 0 && len % 2 == 0 );
if( ret ) // 长度必须为偶数
{
intList.removeAll();
strList.removeAll();
for( int i = 0; i < len; i++ )
{
if( i % 2 == 0 ) // 偶数位置的元素为整数
{
intList.append( _ttoi( entries[i].kACharPtr() ) );
}
else // 奇数位置的元素为字符串
{
strList.append( entries[i] );
}
}
}
return ret;
}
static BOOL ShowRetDlg()
{
ResultDlg retDlg;
AcStringArray datas;
datas.append(_T("目前矿井瓦斯抽采系统正常运转，能保证生产接续"));
datas.append(_T("建立了部分部分瓦斯抽采系统，无法保证生产接续"));
datas.append(_T("没有建立地面固定瓦斯抽采系统"));
datas.append(_T("其他"));
retDlg.setItemDatas(datas);
IntArray trueIndxs;
trueIndxs.push_back(0);
trueIndxs.push_back(1);
retDlg.setTrueIndex(trueIndxs,RET_GASSYS_OBJCT_NAME,DESC_GASSYS_OBJCT_NAME);
AcStringArray bookMks;
bookMks.append(_T("GasSys_Ret"));
bookMks.append(_T("GasSys_Method"));
bookMks.append(_T("GasSys_Conclusion"));
bookMks.append(_T("GasSys_YesOrNo"));
retDlg.setBookMarks(bookMks);
if(IDOK == retDlg.DoModal())
{
return TRUE;
}
else return FALSE;
}
static void SplitCString( const CString& content, const CString& token, AcStringArray& cc )
{
int curPos = 0;
CString str = content.Tokenize( token, curPos );
while ( str != _T( "" ) )
{
cc.append( str );
str = content.Tokenize( token, curPos );
};
}
void MineGEDrawManager::getAllGEDrawsByGEType( const CString& geType, AcStringArray& drawList )
{
GEDrawMap::iterator itr = m_drawMap.find( geType );
if( itr == m_drawMap.end() ) return;
MineGEDrawInfoList& temp_draw_list = itr->second.m_drawInfoList;
for( MineGEDrawInfoList::iterator itr = temp_draw_list.begin(); itr != temp_draw_list.end(); itr++ )
{
drawList.append( itr->pDraw->isA()->name() );
}
}
void GasSysDlg::OnBnClickedEnsure()
{
UpdateData(TRUE);
AcStringArray strName,strIsRunning,strReason;
//从列表中获取数据
GetDatasFromList(m_permCListCtrl,strName,strIsRunning,strReason,_ttoi(m_numPermSys));
ArrayVector datas;
datas.push_back(strName);
datas.push_back(strIsRunning);
datas.push_back(strReason);
//把数据写到数据词典中
ReportDataHelper::WriteDatas(PERMENT_OBJCT_NAME,datas);
AcStringArray gasSysNams;
gasSysNams.append(strName);
AcStringArray gasSysRunning;
gasSysRunning.append(strIsRunning);
strName.removeAll();
strIsRunning.removeAll();
strReason.removeAll();
GetDatasFromList(m_tempCListCtrl,strName,strIsRunning,strReason,_ttoi(m_numTempSys));
datas.clear();
datas.push_back(strName);
datas.push_back(strIsRunning);
datas.push_back(strReason);
ReportDataHelper::WriteDatas(TEMPGAS_OBJCT_NAME,datas);
//WriteDataToFile(_T("btvars.txt"),strName,strIsRunning,strReason);
//for (int i = 0; i < strName.length(); i++)
//{
gasSysNams.append(strName);
gasSysRunning.append(strIsRunning);
//}
RecordRunningSysName(gasSysNams,gasSysRunning);
if(ShowRetDlg())
{
OnOK();
}
}
void ArxDictTool2::getAllKeys( AcStringArray& keys )
{
AcDbDictionary* pDict = GetDictObject( m_dictId );
if( pDict == 0 ) return;
AcDbDictionaryIterator* pIter = pDict->newIterator();
for ( ; !pIter->done(); pIter->next() )
{
keys.append( pIter->name() );
}
delete pIter;
pDict->close();
}
static void FindUseAirPlacesAndReasons( AcDbObjectIdArray& objIds, AcStringArray& reasons )
{
int p1, p2, p3;
FindUseAirPlaces( objIds, p1, p2, p3 );
for( int i = 0; i < p1; i++ )
{
reasons.append( _T( "回采工作面" ) );
}
for( int i = p1; i < p2; i++ )
{
reasons.append( _T( "掘进工作面" ) );
}
for( int i = p2; i < p3; i++ )
{
reasons.append( _T( "硐室" ) );
}
int len = objIds.length();
for( int i = p3; i < len; i++ )
{
reasons.append( _T( "主要进回、采区进回大巷或用风巷道" ) );
}
}
bool IntStrListHelper::AddIntStrPair( const CString& name, int intValue, const CString& strValue )
{
if( ( name.GetLength() == 0 ) || strValue.GetLength() == 0 ) return false;
AcStringArray strList;
AcDbIntArray intList;
GetIntStrList( name, intList, strList );
if( intList.contains( intValue ) || strList.contains( strValue ) ) return false;
intList.append( intValue );
strList.append( strValue );
RemoveIntStrList( name );
return AddIntStrList( name, intList, strList );
}
static BOOL SetBaseReportVal(CString& mineName)
{
SetGroundSys();
SetUndergroundSys();
//瓦斯抽采达标规划和年度实施计划表格
SetTableVal(GAS_PLAN_BOOKMKS_OBJCT_NAME);
//抽采达标工艺方案设计和采掘工作面施工设计表格
SetTableVal(EPCMFD_BOOKMKS_OBJCT_NAME);
//矿井瓦斯抽采达标自评价体系和瓦斯抽采管理制度表格
SetTableVal(SM_BOOKMKS_OBJCT_NAME);
//瓦斯抽采工程验收资料表格
SetTableVal(INSPECT_BOOKMKS_OBJCT_NAME);
//瓦斯泵站能力
SetPumpTable();
AcStringArray names;
names.append(RET_GASSYS_OBJCT_NAME);
names.append(RET_EPCMFD_OBJCT_NAME);
names.append(RET_GASPLAN_OBJCT_NAME);
names.append(RET_INSPECT_OBJCT_NAME);
names.append(RET_SM_OBJCT_NAME);
names.append(RET_GASPUMP_OBJCT_NAME);
names.append(RET_MERSURE_OBJCT_NAME);
names.append(RET_REALATE_OBJCT_NAME);
//结论表格的书写
for(int i = 0; i < names.length(); i++)
{
CString name = names[i].kACharPtr();
if(!SetConclusionTable(name)) return FALSE;
}
WriteMineName(mineName);
//MyWord->SetSeekView(mineName,wdAlignParagraphJustify,wdSeekCurrentPageHeader,_T("{{MineName_Header}}"));
//DeleteExcludeLine();
return TRUE;
}
static bool GetFieldsDatas(const CString& type, const CString& func, const AcDbObjectId& objId,AcStringArray& fields,AcStringArray& datas)
{
fields.removeAll();
datas.removeAll();
if(!FuncFieldHelper::GetFields(func,type,fields)) return false;
fields.remove(_T("钻孔名称"));
for(int i = 0; i < fields.length(); i++)
{
CString strData;
if(!DataHelper::GetPropertyData(objId,fields[i].kACharPtr(),strData)) return false;
DealIntListDatas(fields[i].kACharPtr(),strData);
datas.append(strData);
}
return true;
}
void ArxClassHelper::GetClassHierarchy( const CString& type, AcStringArray& types, bool findAbstractType )
{
AcRxClass* pClass = AcRxClass::cast( acrxClassDictionary->at( type ) );
if( pClass == 0 ) return;
while( pClass != AcDbEntity::desc() )
{
// 排除抽象类型
if( !findAbstractType && ( ( pClass->dxfName() == NULL ) || ( pClass->appName() == NULL ) ) )
{
pClass = pClass->myParent();
continue;
}
types.append( pClass->name() );
pClass = pClass->myParent();
}
types.reverse();
}
bool ArxClassHelper::GetAllTopParentClass( const CString& root, AcStringArray& types )
{
AcStringArray allGETypes;
ArxClassHelper::GetArxClassTypes( root, allGETypes, false );
if( allGETypes.isEmpty() ) return false;
int len = allGETypes.length();
for( int i = 0; i < len; i++ )
{
CString parentType;
if( !ArxClassHelper::GetTopParentClass( allGETypes[i].kACharPtr(), parentType ) ) continue;
if( allGETypes[i].compareNoCase( parentType ) != 0 ) continue;
if( !types.contains( parentType ) )
{
types.append( parentType );
}
}
return true;
}
void PDFConverter(BOOL bDwg)
{
// test();
resbuf* rb = getFileNameInput();
resbuf* pRb = rb;
AcStringArray arrFileName;
while (pRb)
{
arrFileName.append(pRb->resval.rstring);
pRb = pRb->rbnext;
}
acutRelRb(rb);
rb = NULL;
int page = 0;
if (arrFileName.length() == 1)
{
acedInitGet(4, NULL);
// use resource for multi langeage.
// modify by yhl, 2016/6/29.
CString strPrompt;
CAcModuleResourceOverride rs;
strPrompt.LoadString(IDS_ASKFORPAGENUMBER);
int rc = acedGetInt(strPrompt, &page);
// int rc = acedGetInt(_T("\nPlease input the page number, 0 for all <1>: "), &page);
if (RTNONE == rc)
{
page = 1;
}
else if (RTNORM != rc)
{
return;
}
}
for (int i=0; i<arrFileName.length(); i++)
{
convertFile(arrFileName[i], page, bDwg);
}
}
BOOL GasSysDlg::RecordRunningSysName(const AcStringArray& gasSysNams,const AcStringArray& gasSysRunning)
{
//CString dataDirName = _T( "Datas\\BaseTemp\\" );
//CString fileName =BuildPath ( BuildPath( GetAppPathDir(), dataDirName ),_T("bgaspumpvars0.txt") );
//AcOfstream outFile(fileName);
//if (!outFile) return FALSE;
ArrayVector namesVector;
AcStringArray names;
for(int i = 0; i < gasSysNams.length(); i++)
{
CString isRunning = gasSysRunning[i].kACharPtr();
if(isRunning != _T("是")) continue;
names.append(gasSysNams[i]);
//outFile << gasSysNams[i].kACharPtr() << _T("\n");
}
namesVector.push_back(names);
ReportDataHelper::WriteDatas(RUNNING_SYS_OBJCT_NAME,namesVector);
if(namesVector.empty()) return FALSE;
return TRUE;
}
bool ArxClassHelper::GetChildClass( const CString& type, AcStringArray& types )
{
AcRxClass* pParentClass = AcRxClass::cast( acrxClassDictionary->at( type ) );
if( pParentClass == 0 ) return false; // 类型不存在
AcRxDictionaryIterator* iter = acrxClassDictionary->newIterator();
if( iter == 0 ) return false;
AcRxClass* pClass;
for( ; !iter->done(); iter->next() )
{
if( ( pClass = AcRxClass::cast( iter->object() ) ) != NULL )
{
const ACHAR* text = pClass->name();
if( ( text != NULL ) && ( pClass->myParent() == pParentClass ) )
{
types.append( text );
}
}
}
delete iter;
return true;
}
void WDCI2BlockDraw::regPropertyDataNames( AcStringArray& names ) const
{
names.append( _T( "钻孔最大瓦斯涌出初速度" ) );
names.append( _T( "钻孔最大钻屑量" ) );
names.append( _T( "R值指标" ) );
}
void TailraceGEDraw::regPropertyDataNames( AcStringArray& names ) const
{
names.append(_T("大小"));
}
void GasPumpGEDraw::regPropertyDataNames( AcStringArray& names ) const
{
names.append(_T("大小"));
}
/*
* 方法：
* 1) 得到原始的字段链表L1和字段列表框中的字段链表L2
* 2) 遍历链表L2,判断字段是否存在于L1中
* a) 如果存在，则该字段保持不变，并从L1中移除该字段；
* b) 如果不存在，则转第(3)步
* 3) 该字段是新添加的字段，则执行"增加字段"操作Add
* 4) 完成遍历L2，最后剩下的L1的元素就是需要删除的字段
* 5) 执行"删除字段"操作Remove
*/
void FieldManagerDlg::OnBnClickedApplyBtn()
{
if( m_fieldListBox.GetCount() > 0 )
{
// 切换之前更新上次选择的字段信息
// 并检查字段信息的有效性
if( !updateFieldInfo() ) return;
}
// 选择的图元类型
CString selType = getSelType();
if( selType.GetLength() == 0 ) return;
AcStringArray fields;
FieldHelper::GetAllFields( selType, fields );
if( fields.isEmpty() && m_fieldListBox.GetCount() == 0 )
{
MessageBox( _T( "没有字段可更新" ) );
return;
}
// "剩余"字段
// 与m_infoes应该是一一对应的
AcStringArray leftFields;
for( int i = 0; i < m_fieldListBox.GetCount(); i++ )
{
CString text;
m_fieldListBox.GetText( i, text );
leftFields.append( text );
}
int len = leftFields.length();
for( int i = 0; i < len; i++ )
{
CString field = leftFields[i].kACharPtr();
int index = fields.find( field );
if( index >= 0 ) // 已存在，不变
{
fields.removeAt( index );
}
else
{
// 增加字段
FieldHelper::AddField( selType, field );
}
// 默认属性设置不需要添加到词典中
if( m_infoes[i]->isDefault() )
{
FieldInfoHelper::RemoveFieldInfo( selType, field );
}
else
{
// 新增的字段
if( index < 0 || !FieldInfoHelper::FindFieldInfo( selType, field ) )
{
FieldInfoHelper::AddFieldInfo( selType, field, *m_infoes[i] );
}
else
{
// 更新已有的字段信息
FieldInfoHelper::WriteFieldInfo( selType, field, *m_infoes[i] );
}
}
}
// 删除字段
len = fields.length();
for( int i = 0; i < len; i++ )
{
FieldHelper::RemoveField( selType, fields[i].kACharPtr() );
}
MessageBox( _T( "字段信息更新成功!" ) );
}
void TGFPBlockDraw::regPropertyDataNames( AcStringArray& names ) const
{
names.append( _T( "绝对瓦斯涌出量" ) );
names.append( _T( "掘进年月" ) );
}
