C++ (Cpp) AdcDevice::initの例

コード例 #1

ファイル: adc_inputs.cpp プロジェクト: jharvey/rusefi

void initAdcInputs(bool boardTestMode) {
	printMsg(&logger, "initAdcInputs()");
	if (ADC_BUF_DEPTH_FAST > MAX_ADC_GRP_BUF_DEPTH)
		firmwareError(CUSTOM_ERR_ADC_DEPTH_FAST, "ADC_BUF_DEPTH_FAST too high");
	if (ADC_BUF_DEPTH_SLOW > MAX_ADC_GRP_BUF_DEPTH)
		firmwareError(CUSTOM_ERR_ADC_DEPTH_SLOW, "ADC_BUF_DEPTH_SLOW too high");

	configureInputs();

	// migrate to 'enable adcdebug'
	addConsoleActionI("adcdebug", &setAdcDebugReporting);

#if EFI_INTERNAL_ADC
	/*
	 * Initializes the ADC driver.
	 */
	adcStart(&ADC_SLOW_DEVICE, NULL);
	adcStart(&ADC_FAST_DEVICE, NULL);
	adcSTM32EnableTSVREFE(); // Internal temperature sensor

	for (int adc = 0; adc < HW_MAX_ADC_INDEX; adc++) {
		adc_channel_mode_e mode = adcHwChannelEnabled[adc];

		/**
		 * in board test mode all currently enabled ADC channels are running in slow mode
		 */
		if (mode == ADC_SLOW || (boardTestMode && mode == ADC_FAST)) {
			slowAdc.enableChannelAndPin((adc_channel_e) (ADC_CHANNEL_IN0 + adc));
		} else if (mode == ADC_FAST) {
			fastAdc.enableChannelAndPin((adc_channel_e) (ADC_CHANNEL_IN0 + adc));
		}
	}

	// Internal temperature sensor, Available on ADC1 only
	slowAdc.enableChannel((adc_channel_e)ADC_CHANNEL_SENSOR);

	slowAdc.init();
#if HAL_USE_PWM || defined(__DOXYGEN__)
	pwmStart(EFI_INTERNAL_SLOW_ADC_PWM, &pwmcfg_slow);
	pwmEnablePeriodicNotification(EFI_INTERNAL_SLOW_ADC_PWM);
#endif /* HAL_USE_PWM */

	if (CONFIGB(isFastAdcEnabled)) {
		fastAdc.init();
		/*
		 * Initializes the PWM driver.
		 */
#if HAL_USE_PWM || defined(__DOXYGEN__)
		pwmStart(EFI_INTERNAL_FAST_ADC_PWM, &pwmcfg_fast);
		pwmEnablePeriodicNotification(EFI_INTERNAL_FAST_ADC_PWM);
#endif /* HAL_USE_PWM */
	}

	// ADC_CHANNEL_IN0 // PA0
	// ADC_CHANNEL_IN1 // PA1
	// ADC_CHANNEL_IN2 // PA2
	// ADC_CHANNEL_IN3 // PA3
	// ADC_CHANNEL_IN4 // PA4
	// ADC_CHANNEL_IN5 // PA5 - this is also TIM2_CH1
	// ADC_CHANNEL_IN6 // PA6
	// ADC_CHANNEL_IN7 // PA7
	// ADC_CHANNEL_IN8 // PB0
	// ADC_CHANNEL_IN9 // PB1
	// ADC_CHANNEL_IN10 // PC0
	// ADC_CHANNEL_IN11 // PC1
	// ADC_CHANNEL_IN12 // PC2
	// ADC_CHANNEL_IN13 // PC3
	// ADC_CHANNEL_IN14 // PC4
	// ADC_CHANNEL_IN15 // PC5

	//if(slowAdcChannelCount > ADC_MAX_SLOW_CHANNELS_COUNT) // todo: do we need this logic? do we need this check

	addConsoleActionI("adc", (VoidInt) printAdcValue);
#else
	printMsg(&logger, "ADC disabled");
#endif
}

コード例 #2

ファイル: adc_inputs.cpp プロジェクト: jon-weisz/rusefi

void initAdcInputs(bool boardTestMode) {
	printMsg(&logger, "initAdcInputs()");

	configureInputs();


	printStatus();

	addConsoleActionI("adcDebug", &setAdcDebugReporting);

#if EFI_INTERNAL_ADC
	/*
	 * Initializes the ADC driver.
	 */
	adcStart(&ADC_SLOW_DEVICE, NULL);
	adcStart(&ADC_FAST_DEVICE, NULL);

	for (int adc = 0; adc < HW_MAX_ADC_INDEX; adc++) {
		adc_channel_mode_e mode = adcHwChannelEnabled[adc];

		/**
		 * in board test mode all currently enabled ADC channels are running in slow mode
		 */
		if (mode == ADC_SLOW || (boardTestMode && mode == ADC_FAST)) {
			slowAdc.addChannel((adc_channel_e) (ADC_CHANNEL_IN0 + adc));
		} else if (mode == ADC_FAST) {
			fastAdc.addChannel((adc_channel_e) (ADC_CHANNEL_IN0 + adc));
		}
	}

	slowAdc.init();
	pwmStart(EFI_INTERNAL_SLOW_ADC_PWM, &pwmcfg_slow);
	if (boardConfiguration->isFastAdcEnabled) {
		fastAdc.init();
		/*
		 * Initializes the PWM driver.
		 */
		pwmStart(EFI_INTERNAL_FAST_ADC_PWM, &pwmcfg_fast);
	}

	// ADC_CHANNEL_IN0 // PA0
	// ADC_CHANNEL_IN1 // PA1
	// ADC_CHANNEL_IN2 // PA2
	// ADC_CHANNEL_IN3 // PA3
	// ADC_CHANNEL_IN4 // PA4
	// ADC_CHANNEL_IN5 // PA5 - this is also TIM2_CH1
	// ADC_CHANNEL_IN6 // PA6
	// ADC_CHANNEL_IN7 // PA7
	// ADC_CHANNEL_IN8 // PB0
	// ADC_CHANNEL_IN9 // PB1
	// ADC_CHANNEL_IN10 // PC0
	// ADC_CHANNEL_IN11 // PC1
	// ADC_CHANNEL_IN12 // PC2
	// ADC_CHANNEL_IN13 // PC3
	// ADC_CHANNEL_IN14 // PC4
	// ADC_CHANNEL_IN15 // PC5

	//if(slowAdcChannelCount > ADC_MAX_SLOW_CHANNELS_COUNT) // todo: do we need this logic? do we need this check

	addConsoleActionI("adc", (VoidInt) printAdcValue);
	addConsoleAction("fadc", printFullAdcReport);
#else
	printMsg(&logger, "ADC disabled");
#endif
}