コード例 #1
0
ファイル: V3Inline.cpp プロジェクト: duythanhphan/verilator
    // VISITORS
    virtual void visit(AstCellInline* nodep, AstNUser*) {
	// Inlined cell under the inline cell, need to move to avoid conflicts
	nodep->unlinkFrBack();
	m_modp->addInlinesp(nodep);
	// Rename
	string name = m_cellp->name() + "__DOT__" + nodep->name();
	nodep->name(name);
	UINFO(6, "    Inline "<<nodep<<endl);
	// Do CellInlines under this, but don't move them
	nodep->iterateChildren(*this);
    }
コード例 #2
0
    virtual void visit(AstBegin* nodep, AstNUser*) {
	// Begin blocks were only useful in variable creation, change names and delete
	UINFO(8,"  "<<nodep<<endl);
	string oldScope = m_namedScope;
	string oldUnnamed = m_unnamedScope;
	{
	    UINFO(8,"nname "<<m_namedScope<<endl);
	    if (nodep->name() != "") {  // Else unneeded unnamed block
		// Create data for dotted variable resolution
		string dottedname = nodep->name() + "__DOT__";  // So always found
		string::size_type pos;
		while ((pos=dottedname.find("__DOT__")) != string::npos) {
		    string ident = dottedname.substr(0,pos);
		    dottedname = dottedname.substr(pos+strlen("__DOT__"));
		    if (!nodep->unnamed()) {
			if (m_namedScope=="") m_namedScope = ident;
			else m_namedScope = m_namedScope + "__DOT__"+ident;
		    }
		    if (m_unnamedScope=="") m_unnamedScope = ident;
		    else m_unnamedScope = m_unnamedScope + "__DOT__"+ident;
		    // Create CellInline for dotted var resolution
		    if (!m_ftaskp) {
			AstCellInline* inlinep = new AstCellInline(nodep->fileline(),
								   m_unnamedScope, "__BEGIN__");
			m_modp->addInlinesp(inlinep);  // Must be parsed before any AstCells
		    }
		}
	    }

	    // Remap var names and replace lower Begins
	    nodep->stmtsp()->iterateAndNext(*this);
	    if (nodep->genforp()) nodep->v3fatalSrc("GENFORs should have been expanded earlier");
	}
	m_namedScope = oldScope;
	m_unnamedScope = oldUnnamed;

	// Cleanup
	AstNode* addsp = NULL;
	if (AstNode* stmtsp = nodep->stmtsp()) {
	    stmtsp->unlinkFrBackWithNext();
	    if (addsp) { addsp = addsp->addNextNull(stmtsp); } else { addsp = stmtsp; }
	}
	if (addsp) {
	    nodep->replaceWith(addsp);
	} else {
	    nodep->unlinkFrBack();
	}
	pushDeletep(nodep); nodep=NULL;
    }
コード例 #3
0
ファイル: V3Inline.cpp プロジェクト: duythanhphan/verilator
    virtual void visit(AstCell* nodep, AstNUser*) {
	if (nodep->modp()->user1()) {  // Marked with inline request
	    UINFO(5," Inline CELL   "<<nodep<<endl);
	    UINFO(5,"   To MOD      "<<m_modp<<endl);
	    ++m_statCells;

	    // Before cloning simplify pin assignments
	    // Better off before, as if module has multiple instantiations
	    // we'll save work, and we can't call pinReconnectSimple in
	    // this loop as it clone()s itself.
	    for (AstPin* pinp = nodep->pinsp(); pinp; pinp=pinp->nextp()->castPin()) {
		if (!pinp->exprp()) continue;
		V3Inst::pinReconnectSimple(pinp, nodep, m_modp, false);
	    }

	    // Clone original module
	    if (debug()>=9) { nodep->dumpTree(cout,"inlcell:"); }
	    //if (debug()>=9) { nodep->modp()->dumpTree(cout,"oldmod:"); }
	    AstNodeModule* newmodp = nodep->modp()->cloneTree(false);
	    if (debug()>=9) { newmodp->dumpTree(cout,"newmod:"); }
	    // Clear var markings and find cell cross references
	    AstNode::user2ClearTree();
	    AstNode::user4ClearTree();
	    { InlineCollectVisitor(nodep->modp()); }  // {} to destroy visitor immediately
	    // Create data for dotted variable resolution
	    AstCellInline* inlinep = new AstCellInline(nodep->fileline(),
						       nodep->name(), nodep->modp()->origName());
	    m_modp->addInlinesp(inlinep);  // Must be parsed before any AstCells
	    // Create assignments to the pins
	    for (AstPin* pinp = nodep->pinsp(); pinp; pinp=pinp->nextp()->castPin()) {
		if (!pinp->exprp()) continue;
		UINFO(6,"     Pin change from "<<pinp->modVarp()<<endl);
		// Make new signal; even though we'll optimize the interconnect, we
		// need an alias to trace correctly.  If tracing is disabled, we'll
		// delete it in later optimizations.
		AstVar* pinOldVarp = pinp->modVarp();
		AstVar* pinNewVarp = pinOldVarp->clonep()->castVar();

		AstNode* connectRefp = pinp->exprp();
		if (!connectRefp->castConst() && !connectRefp->castVarRef()) {
		    pinp->v3fatalSrc("Unknown interconnect type; pinReconnectSimple should have cleared up\n");
		}
		if (pinNewVarp->isOutOnly() && connectRefp->castConst()) {
		    pinp->v3error("Output port is connected to a constant pin, electrical short");
		}

		// Propagate any attributes across the interconnect
		pinNewVarp->propagateAttrFrom(pinOldVarp);
		if (connectRefp->castVarRef()) {
		    connectRefp->castVarRef()->varp()->propagateAttrFrom(pinOldVarp);
		}

		// One to one interconnect won't make a temporary variable.
		// This prevents creating a lot of extra wires for clock signals.
		// It will become a tracing alias.
		UINFO(6,"One-to-one "<<connectRefp<<endl);
		UINFO(6,"       -to "<<pinNewVarp<<endl);
		pinNewVarp->user2p(connectRefp);
		// Public output inside the cell must go via an assign rather than alias
		// Else the public logic will set the alias, loosing the value to be propagated up
		// (InOnly isn't a problem as the AssignAlias will create the assignment for us)
		pinNewVarp->user3(pinNewVarp->isSigUserRWPublic() && pinNewVarp->isOutOnly());
	    }
	    // Cleanup var names, etc, to not conflict
	    { InlineRelinkVisitor(newmodp, m_modp, nodep); }
	    // Move statements to top module
	    if (debug()>=9) { newmodp->dumpTree(cout,"fixmod:"); }
	    AstNode* stmtsp = newmodp->stmtsp();
	    if (stmtsp) stmtsp->unlinkFrBackWithNext();
	    if (stmtsp) m_modp->addStmtp(stmtsp);
	    // Remove the cell
	    newmodp->deleteTree(); newmodp=NULL; // Clear any leftover ports, etc
	    nodep->unlinkFrBack();
	    pushDeletep(nodep); nodep = NULL;
	    if (debug()>=9) { m_modp->dumpTree(cout,"donemod:"); }
	}
    }