LRESULT CBacnetVariable::Fresh_Variable_Item(WPARAM wParam,LPARAM lParam)
{
int cmp_ret ;//compare if match it will 0;
int Changed_Item = (int)wParam;
int Changed_SubItem = (int)lParam;
CString temp_task_info;
CString New_CString = m_variable_list.GetItemText(Changed_Item,Changed_SubItem);
CString cstemp_value;
memcpy_s(&m_temp_variable_data[Changed_Item],sizeof(Str_variable_point),&m_Variable_data.at(Changed_Item),sizeof(Str_variable_point));
if(Changed_SubItem == VARIABLE_LABLE)
{
CString cs_temp = m_variable_list.GetItemText(Changed_Item,Changed_SubItem);
if(cs_temp.GetLength()>= STR_VARIABLE_LABEL) //长度不能大于结构体定义的长度;
{
MessageBox(_T("Length can not higher than 9"),_T("Warning"));
PostMessage(WM_REFRESH_BAC_VARIABLE_LIST,NULL,NULL);
return 0;
}
char cTemp1[255];
memset(cTemp1,0,255);
WideCharToMultiByte( CP_ACP, 0, cs_temp.GetBuffer(), -1, cTemp1, 255, NULL, NULL );
memcpy_s(m_Variable_data.at(Changed_Item).label,STR_VARIABLE_LABEL,cTemp1,STR_VARIABLE_LABEL);
}
if(Changed_SubItem == VARIABLE_FULL_LABLE)
{
CString cs_temp = m_variable_list.GetItemText(Changed_Item,Changed_SubItem);
if(cs_temp.GetLength()>= STR_VARIABLE_DESCRIPTION_LENGTH) //长度不能大于结构体定义的长度;
{
MessageBox(_T("Length can not higher than 20"),_T("Warning"));
PostMessage(WM_REFRESH_BAC_VARIABLE_LIST,NULL,NULL);
return 0;
}
char cTemp1[255];
memset(cTemp1,0,255);
WideCharToMultiByte( CP_ACP, 0, cs_temp.GetBuffer(), -1, cTemp1, 255, NULL, NULL );
memcpy_s(m_Variable_data.at(Changed_Item).description,STR_VARIABLE_DESCRIPTION_LENGTH,cTemp1,STR_VARIABLE_DESCRIPTION_LENGTH);
}
if(Changed_SubItem == VARIABLE_AUTO_MANUAL)
{
CString temp_cs = m_variable_list.GetItemText(Changed_Item,Changed_SubItem);
if(temp_cs.CompareNoCase(_T("Auto"))==0)
{
m_variable_list.SetCellEnabled(Changed_Item,VARIABLE_VALUE,0);
m_Variable_data.at(Changed_Item).auto_manual = BAC_AUTO;
}
else
{
m_variable_list.SetCellEnabled(Changed_Item,VARIABLE_VALUE,1);
m_Variable_data.at(Changed_Item).auto_manual = BAC_MANUAL;
}
}
if(Changed_SubItem == VARIABLE_VALUE)//这里只用处理 ANALOG 的值就看要了， DIGITAL 的值在Click 事件中处理过了;
{
CString temp_cs = m_variable_list.GetItemText(Changed_Item,Changed_SubItem);
int temp_int = (int)(_wtof(temp_cs) * 1000);
m_Variable_data.at(Changed_Item).value = temp_int;
//int temp_int = _wtoi(temp_cs);
//m_Variable_data.at(Changed_Item).value = temp_int;
}
if(Changed_SubItem == VARIABLE_UNITE)
{
BacnetRange dlg;
CString temp_cs = m_variable_list.GetItemText(Changed_Item,Changed_SubItem);
if(temp_cs.CompareNoCase(Units_Type[UNITS_TYPE_ANALOG])==0)
{
bac_ranges_type = VARIABLE_RANGE_ANALOG_TYPE;
dlg.DoModal();
if(range_cancel)
{
PostMessage(WM_REFRESH_BAC_VARIABLE_LIST,Changed_Item,REFRESH_ON_ITEM);//这里调用 刷新线程重新刷新会方便一点;
return 0;
}
m_Variable_data.at(Changed_Item).digital_analog = BAC_UNITS_ANALOG;
m_Variable_data.at(Changed_Item).range = bac_range_number_choose;
m_variable_list.SetItemText(Changed_Item,Changed_SubItem,Variable_Analog_Units_Array[bac_range_number_choose]);
if(m_Variable_data.at(Changed_Item).range == 20) //如果是时间;
{
char temp_char[50];
int time_seconds = m_Variable_data.at(Changed_Item).value / 1000;
intervaltotext(temp_char,time_seconds,0,0);
CString temp_11;
MultiByteToWideChar( CP_ACP, 0, temp_char, strlen(temp_char) + 1,
temp_11.GetBuffer(MAX_PATH), MAX_PATH );
temp_11.ReleaseBuffer();
m_variable_list.SetItemText(Changed_Item,VARIABLE_VALUE,temp_11);
}
else
{
CString cstemp_value;
float temp_float_value;
temp_float_value = ((float)m_Variable_data.at(Changed_Item).value) / 1000;
cstemp_value.Format(_T("%.3f"),temp_float_value);
m_variable_list.SetItemText(Changed_Item,VARIABLE_VALUE,cstemp_value);
/* cstemp_value.Format(_T("%d"),m_Variable_data.at(Changed_Item).value);
m_variable_list.SetItemText(Changed_Item,VARIABLE_VALUE,cstemp_value);*/
}
}
else if(temp_cs.CompareNoCase(Units_Type[UNITS_TYPE_DIGITAL])==0)
{
bac_ranges_type = VARIABLE_RANGE_DIGITAL_TYPE;
dlg.DoModal();
if(range_cancel)
{
PostMessage(WM_REFRESH_BAC_VARIABLE_LIST,Changed_Item,REFRESH_ON_ITEM);//这里调用 刷新线程重新刷新会方便一点;
return 0;
}
m_Variable_data.at(Changed_Item).digital_analog = BAC_UNITS_DIGITAL;
m_Variable_data.at(Changed_Item).range = bac_range_number_choose;
CString temp1;
CStringArray temparray;
temp1 = Digital_Units_Array[bac_range_number_choose];//22 is the sizeof the array
SplitCStringA(temparray,temp1,_T("/"));
if(m_Variable_data.at(Changed_Item).control == 1)
{
if((temparray.GetSize()==2)&&(!temparray.GetAt(1).IsEmpty()))
{
m_variable_list.SetItemText(Changed_Item,VARIABLE_VALUE,temparray.GetAt(1));
}
}
else
{
if((temparray.GetSize()==2)&&(!temparray.GetAt(0).IsEmpty()))
{
m_variable_list.SetItemText(Changed_Item,VARIABLE_VALUE,temparray.GetAt(0));
}
}
m_variable_list.SetItemText(Changed_Item,VARIABLE_UNITE,temp1);
}
else if(temp_cs.CompareNoCase(Units_Type[UNITS_TYPE_CUSTOM])==0)
{
bac_ranges_type = VARIABLE_RANGE_CUSTOM_DIG_TYPE;
}
}
cmp_ret = memcmp(&m_temp_variable_data[Changed_Item],&m_Variable_data.at(Changed_Item),sizeof(Str_variable_point));
if(cmp_ret!=0)
{
m_variable_list.SetItemBkColor(Changed_Item,Changed_SubItem,LIST_ITEM_CHANGED_BKCOLOR);
temp_task_info.Format(_T("Write Variable List Item%d .Changed to \"%s\" "),Changed_Item + 1,New_CString);
Post_Write_Message(g_bac_instance,WRITEVARIABLE_T3000,Changed_Item,Changed_Item,sizeof(Str_variable_point),m_variable_dlg_hwnd ,temp_task_info,Changed_Item,Changed_SubItem);
}
return 0;
}
LRESULT CBacnetInput::Fresh_Input_Item(WPARAM wParam,LPARAM lParam)
{
int cmp_ret ;//compare if match it will 0;
int Changed_Item = (int)wParam;
int Changed_SubItem = (int)lParam;
memcpy_s(&m_temp_Input_data[Changed_Item],sizeof(Str_in_point),&m_Input_data.at(Changed_Item),sizeof(Str_in_point));
CString temp_task_info;
CString New_CString = m_input_list.GetItemText(Changed_Item,Changed_SubItem);
CString cstemp_value;
if(Changed_SubItem == INPUT_LABLE)
{
CString cs_temp = m_input_list.GetItemText(Changed_Item,Changed_SubItem);
if(cs_temp.GetLength()>= STR_IN_LABEL) //长度不能大于结构体定义的长度;
{
MessageBox(_T("Length can not higher than 8"),_T("Warning"));
PostMessage(WM_REFRESH_BAC_INPUT_LIST,NULL,NULL);
return 0;
}
char cTemp1[255];
memset(cTemp1,0,255);
WideCharToMultiByte( CP_ACP, 0, cs_temp.GetBuffer(), -1, cTemp1, 255, NULL, NULL );
memcpy_s(m_Input_data.at(Changed_Item).label,STR_IN_LABEL,cTemp1,STR_IN_LABEL);
}
if(Changed_SubItem == INPUT_FULL_LABLE)
{
CString cs_temp = m_input_list.GetItemText(Changed_Item,Changed_SubItem);
if(cs_temp.GetLength()>= STR_IN_DESCRIPTION_LENGTH) //长度不能大于结构体定义的长度;
{
MessageBox(_T("Length can not higher than 20"),_T("Warning"));
PostMessage(WM_REFRESH_BAC_INPUT_LIST,NULL,NULL);
return 0;
}
char cTemp1[255];
memset(cTemp1,0,255);
WideCharToMultiByte( CP_ACP, 0, cs_temp.GetBuffer(), -1, cTemp1, 255, NULL, NULL );
memcpy_s(m_Input_data.at(Changed_Item).description,STR_IN_DESCRIPTION_LENGTH,cTemp1,STR_IN_DESCRIPTION_LENGTH);
}
if(Changed_SubItem == INPUT_AUTO_MANUAL)
{
CString temp_cs = m_input_list.GetItemText(Changed_Item,Changed_SubItem);
if(temp_cs.CompareNoCase(_T("Auto"))==0)
{
m_input_list.SetCellEnabled(Changed_Item,INPUT_VALUE,0);
m_Input_data.at(Changed_Item).auto_manual = BAC_AUTO ;
}
else
{
m_input_list.SetCellEnabled(Changed_Item,INPUT_VALUE,1);
m_Input_data.at(Changed_Item).auto_manual = BAC_MANUAL ;
}
}
if(Changed_SubItem == INPUT_VALUE)
{
CString temp_cs = m_input_list.GetItemText(Changed_Item,Changed_SubItem);
int temp_int = (int)(_wtof(temp_cs) * 1000);
//int temp_int = _wtoi(temp_cs);
m_Input_data.at(Changed_Item).value = temp_int;
}
if(Changed_SubItem == INPUT_RANGE)
{
CString temp_cs = m_input_list.GetItemText(Changed_Item,Changed_SubItem);
BacnetRange dlg;
if(temp_cs.CompareNoCase(Units_Type[UNITS_TYPE_ANALOG])==0)
{
bac_ranges_type = INPUT_RANGE_ANALOG_TYPE;
dlg.DoModal();
if(range_cancel)
{
PostMessage(WM_REFRESH_BAC_INPUT_LIST,Changed_Item,REFRESH_ON_ITEM);//这里调用 刷新线程重新刷新会方便一点;
return 0;
}
m_Input_data.at(Changed_Item).digital_analog = BAC_UNITS_ANALOG;
m_Input_data.at(Changed_Item).range = bac_range_number_choose;
m_input_list.SetItemText(Changed_Item,INPUT_RANGE,Input_Analog_Units_Array[bac_range_number_choose]);
m_input_list.SetItemText(Changed_Item,INPUT_UNITE,Input_List_Analog_Units[bac_range_number_choose]);
cstemp_value.Format(_T("%d"),m_Input_data.at(Changed_Item).calibration);
m_input_list.SetItemText(Changed_Item,INPUT_CAL,cstemp_value);
m_input_list.SetCellEnabled(Changed_Item,INPUT_CAL,1);
m_input_list.SetCellEnabled(Changed_Item,INPUT_UNITE,1);
//m_input_list.SetItemText(Changed_Item,OUTPUT_100_PERSENT,_T("10"));
//m_input_list.SetCellEnabled(Changed_Item,OUTPUT_100_PERSENT,1);
CString cstemp_value;
float temp_float_value;
temp_float_value = ((float)m_Input_data.at(Changed_Item).value) / 1000;
cstemp_value.Format(_T("%.2f"),temp_float_value);
m_input_list.SetItemText(Changed_Item,INPUT_VALUE,cstemp_value);
//cstemp_value.Format(_T("%d"),m_Input_data.at(Changed_Item).value);
//m_input_list.SetItemText(Changed_Item,INPUT_VALUE,cstemp_value);
}
else if(temp_cs.CompareNoCase(Units_Type[UNITS_TYPE_DIGITAL])==0)
{
bac_range_number_choose = m_Input_data.at(Changed_Item).range;
bac_ranges_type = INPUT_RANGE_DIGITAL_TYPE;
dlg.DoModal();
if(range_cancel)
{
PostMessage(WM_REFRESH_BAC_INPUT_LIST,Changed_Item,REFRESH_ON_ITEM);//这里调用 刷新线程重新刷新会方便一点;
return 0;
}
m_Input_data.at(Changed_Item).digital_analog = BAC_UNITS_DIGITAL;
m_Input_data.at(Changed_Item).range = bac_range_number_choose;
//m_input_list.SetItemText(Changed_Item,INPUT_RANGE,INPUT_Digital_Units_Show[bac_range_number_choose]);
m_input_list.SetItemText(Changed_Item,INPUT_CAL,_T(""));
m_input_list.SetCellEnabled(Changed_Item,INPUT_CAL,0);
m_input_list.SetItemText(Changed_Item,INPUT_UNITE,_T(""));
m_input_list.SetCellEnabled(Changed_Item,INPUT_UNITE,0);
CString temp1;
CStringArray temparray;
temp1 = Digital_Units_Array[bac_range_number_choose];//22 is the sizeof the array
SplitCStringA(temparray,temp1,_T("/"));
if(m_Input_data.at(Changed_Item).control == 1)
{
if((temparray.GetSize()==2)&&(!temparray.GetAt(1).IsEmpty()))
{
m_input_list.SetItemText(Changed_Item,INPUT_VALUE,temparray.GetAt(1));
}
}
else
{
if((temparray.GetSize()==2)&&(!temparray.GetAt(0).IsEmpty()))
{
m_input_list.SetItemText(Changed_Item,INPUT_VALUE,temparray.GetAt(0));
}
}
m_input_list.SetItemText(Changed_Item,INPUT_RANGE,temp1);
}
else if(temp_cs.CompareNoCase(Units_Type[UNITS_TYPE_CUSTOM])==0)
{
bac_ranges_type = OUTPUT_RANGE_CUSTOM_DIG_TYPE;
//dlg.DoModal();
}
else
{
PostMessage(WM_REFRESH_BAC_INPUT_LIST,Changed_Item,REFRESH_ON_ITEM);//这里调用 刷新线程重新刷新会方便一点;
//m_input_list.SetItemText(Changed_Item,INPUT_RANGE,temp_cs);
}
}
//if(Changed_SubItem==INPUT_RANGE)
//{
// CString temp_cs = m_input_list.GetItemText(Changed_Item,Changed_SubItem);
// if(temp_cs.CompareNoCase(_T("Not Used"))==0)
// {
// m_input_list.SetItemText(Changed_Item,INPUT_UNITE,Input_Unit[_unused]);
// }
// else if(temp_cs.CompareNoCase(_T("10K(-40->120)"))==0)
// {
// ListCtrlEx::CStrList strlist;
// strlist.clear();
// strlist.push_back(Input_Unit[degC]);
// //strlist.push_back(Input_Unit[degF]);
// m_input_list.SetCellStringList(Changed_Item, INPUT_UNITE, strlist);
// m_input_list.SetItemText(Changed_Item,INPUT_UNITE,Input_Unit[degC]);
// }
// else if(temp_cs.CompareNoCase(_T("I 4->20ma"))==0)
// {
// ListCtrlEx::CStrList strlist;
// strlist.clear();
// TRACE(Input_Unit[ma]);
// strlist.push_back(Input_Unit[ma]);
// m_input_list.SetCellStringList(Changed_Item, INPUT_UNITE, strlist);
// m_input_list.SetItemText(Changed_Item,INPUT_UNITE,Input_Unit[ma]);
// }
// else if(temp_cs.CompareNoCase(_T("V 0->10V"))==0)
// {
// ListCtrlEx::CStrList strlist;
// strlist.clear();
// TRACE(Input_Unit[Volts]);
// strlist.push_back(Input_Unit[Volts]);
// m_input_list.SetCellStringList(Changed_Item, INPUT_UNITE, strlist);
// m_input_list.SetItemText(Changed_Item,INPUT_UNITE,Input_Unit[Volts]);
// }
// else if(temp_cs.CompareNoCase(_T("V 0->5V"))==0)
// {
// ListCtrlEx::CStrList strlist;
// strlist.clear();
// TRACE(Input_Unit[Volts]);
// strlist.push_back(Input_Unit[Volts]);
// m_input_list.SetCellStringList(Changed_Item, INPUT_UNITE, strlist);
// m_input_list.SetItemText(Changed_Item,INPUT_UNITE,Input_Unit[Volts]);
// }
// else if(temp_cs.CompareNoCase(_T("V 0->24AC"))==0)
// {
// ListCtrlEx::CStrList strlist;
// strlist.clear();
// strlist.push_back(_T("ON/OFF"));
// m_input_list.SetCellStringList(Changed_Item, INPUT_UNITE, strlist);
// m_input_list.SetItemText(Changed_Item,INPUT_UNITE,_T("ON/OFF"));
// }
// else if(temp_cs.CompareNoCase(_T("TST Normal"))==0)
// {
// ListCtrlEx::CStrList strlist;
// strlist.clear();
// strlist.push_back(_T("ON/OFF"));
// m_input_list.SetCellStringList(Changed_Item, INPUT_UNITE, strlist);
// m_input_list.SetItemText(Changed_Item,INPUT_UNITE,_T("ON/OFF"));
// }
//}
if(Changed_SubItem==INPUT_CAL)
{
CString cs_temp=m_input_list.GetItemText(Changed_Item,INPUT_CAL);
int cal_value = _wtoi(cs_temp);
m_Input_data.at(Changed_Item).calibration = cal_value;
}
else if(Changed_SubItem==INPUT_FITLER)
{
CString cs_temp=m_input_list.GetItemText(Changed_Item,INPUT_FITLER);
int temp2 = _wtoi(cs_temp);
m_Input_data.at(Changed_Item).filter = (int8_t)(log((double)temp2)/log((double)2));
}
else if(Changed_SubItem==INPUT_DECOM)
{
CString cs_temp = m_input_list.GetItemText(Changed_Item,INPUT_DECOM);
int dec_index=-1;
for (int m=0; m<(int)sizeof(Decom_Array)/sizeof(Decom_Array[0]); m++)
{
if(cs_temp.CompareNoCase(Decom_Array[m])==0)
{
dec_index = m;
break;
}
}
m_Input_data.at(Changed_Item).decom = dec_index;
}
cmp_ret = memcmp(&m_temp_Input_data[Changed_Item],&m_Input_data.at(Changed_Item),sizeof(Str_in_point));
if(cmp_ret!=0)
{
m_input_list.SetItemBkColor(Changed_Item,Changed_SubItem,LIST_ITEM_CHANGED_BKCOLOR);
temp_task_info.Format(_T("Write Input List Item%d .Changed to \"%s\" "),Changed_Item + 1,New_CString);
Post_Write_Message(g_bac_instance,WRITEINPUT_T3000,Changed_Item,Changed_Item,sizeof(Str_in_point),m_input_dlg_hwnd ,temp_task_info,Changed_Item,Changed_SubItem);
}
//m_input_list.Invalidate();
return 0;
}
void CBacnetOutput::OnNMClickListOutput(NMHDR *pNMHDR, LRESULT *pResult)
{
LPNMITEMACTIVATE pNMItemActivate = reinterpret_cast<LPNMITEMACTIVATE>(pNMHDR);
// TODO: Add your control notification handler code here
long lRow,lCol;
m_output_list.Set_Edit(true);
DWORD dwPos=GetMessagePos();//Get which line is click by user.Set the check box, when user enter Insert it will jump to program dialog
CPoint point( LOWORD(dwPos), HIWORD(dwPos));
m_output_list.ScreenToClient(&point);
LVHITTESTINFO lvinfo;
lvinfo.pt=point;
lvinfo.flags=LVHT_ABOVE;
int nItem=m_output_list.SubItemHitTest(&lvinfo);
if((nItem!=-1) && (nItem < BAC_OUTPUT_ITEM_COUNT))
{
output_list_line = nItem;
if((m_Output_data.at(output_list_line).sub_id !=0) &&
//(m_Output_data.at(output_list_line).sub_number !=0) &&
(m_Output_data.at(output_list_line).sub_product !=0))
{
unsigned char temp_pid = m_Output_data.at(output_list_line).sub_product;
if((temp_pid == PM_T3PT10) ||
(temp_pid == PM_T3IOA) ||
(temp_pid == PM_T332AI) ||
(temp_pid == PM_T38AI16O) ||
(temp_pid == PM_T38I13O) ||
(temp_pid == PM_T34AO) ||
(temp_pid == PM_T36CT) ||
(temp_pid == PM_T322AI) ||
(temp_pid == PM_T38AI8AO6DO))
{
m_output_item_info.ShowWindow(true);
CString temp_name;
temp_name = GetProductName(m_Output_data.at(output_list_line).sub_product);
CString show_info;
CString temp_id;
CString temp_number;
temp_id.Format(_T(" Sub ID: %u "),(unsigned char)m_Output_data.at(output_list_line).sub_id);
temp_number.Format(_T("Output%d"),(unsigned char)m_Output_data.at(output_list_line).sub_number+1);
show_info = _T("Module:") + temp_name +_T(" ") + temp_id + temp_number;
m_output_item_info.SetWindowTextW(show_info);
}
else
{
m_output_item_info.ShowWindow(false);
}
}
else
{
m_output_item_info.ShowWindow(false);
}
}
lRow = lvinfo.iItem;
lCol = lvinfo.iSubItem;
if(lRow>= OUTPUT_LIMITE_ITEM_COUNT)
return;
if(lRow>m_output_list.GetItemCount()) //如果点击区超过最大行号，则点击是无效的
return;
if(lRow<0)
return;
CString New_CString;
CString temp_task_info;
CString temp1;
CStringArray temparray;
if(lCol == OUTPUT_VALUE)
{
if(m_Output_data.at(lRow).auto_manual == BAC_AUTO) //If it is auto mode, disable to change the value.
{
m_output_list.Set_Edit(false);
return;
}
if(m_Output_data.at(lRow).digital_analog != BAC_UNITS_DIGITAL)
return;
memcpy_s(&m_temp_output_data[lRow],sizeof(Str_out_point),&m_Output_data.at(lRow),sizeof(Str_out_point));
if((m_Output_data.at(lRow).range < 23) &&(m_Output_data.at(lRow).range !=0))
temp1 = Digital_Units_Array[m_Output_data.at(lRow).range];
else if((m_Output_data.at(lRow).range >=23) && (m_Output_data.at(lRow).range <= 30))
{
if(receive_customer_unit)
temp1 = temp_unit_no_index[m_Output_data.at(lRow).range - 23];
else
{
m_output_list.Set_Edit(false);
return;
}
}
else
return;
//if(m_Output_data.at(lRow).range > 11)
// temp1 = Digital_Units_Array[m_Output_data.at(lRow).range - 11];//11 is the sizeof the array
//else
// temp1 = Digital_Units_Array[m_Output_data.at(lRow).range];
SplitCStringA(temparray,temp1,_T("/"));
if(m_Output_data.at(lRow).control == 0)
{
m_Output_data.at(lRow).control = 1;
m_output_list.SetItemText(lRow,OUTPUT_VALUE,temparray.GetAt(1));
New_CString = temparray.GetAt(1);
}
else
{
m_Output_data.at(lRow).control = 0;
m_output_list.SetItemText(lRow,OUTPUT_VALUE,temparray.GetAt(0));
New_CString = temparray.GetAt(0);
}
}
else if(lCol == OUTPUT_AUTO_MANUAL)
{
memcpy_s(&m_temp_output_data[lRow],sizeof(Str_out_point),&m_Output_data.at(lRow),sizeof(Str_out_point));
if(m_Output_data.at(lRow).auto_manual == 0)
{
m_Output_data.at(lRow).auto_manual = 1;
m_output_list.SetItemText(lRow,OUTPUT_AUTO_MANUAL,_T("Manual"));
//m_output_list.SetCellEnabled(lRow,OUTPUT_VALUE,TRUE);
New_CString = _T("Manual");
}
else
{
m_Output_data.at(lRow).auto_manual = 0;
m_output_list.SetItemText(lRow,OUTPUT_AUTO_MANUAL,_T("Auto"));
//m_output_list.SetCellEnabled(lRow,OUTPUT_VALUE,FALSE);
New_CString = _T("Auto");
}
}
else if(lCol == OUTPUT_RANGE)
{
//CString temp_cs = m_output_list.GetItemText(Changed_Item,Changed_SubItem);
BacnetRange dlg;
//点击产品的时候 需要读customer units，老的产品firmware 说不定没有 这些，所以不强迫要读到;
if(!read_customer_unit)
{
int temp_invoke_id = -1;
int send_status = true;
int resend_count = 0;
for (int z=0;z<3;z++)
{
do
{
resend_count ++;
if(resend_count>5)
{
send_status = false;
break;
}
temp_invoke_id = GetPrivateData(
g_bac_instance,
READUNIT_T3000,
0,
BAC_CUSTOMER_UNITS_COUNT - 1,
sizeof(Str_Units_element));
Sleep(SEND_COMMAND_DELAY_TIME);
} while (g_invoke_id<0);
if(send_status)
{
for (int z=0;z<1000;z++)
{
Sleep(1);
if(tsm_invoke_id_free(temp_invoke_id))
{
read_customer_unit = true;
break;
}
else
continue;
}
}
if(read_customer_unit)
break;
}
}
if(m_Output_data.at(lRow).digital_analog == BAC_UNITS_ANALOG)
{
bac_ranges_type = OUTPUT_RANGE_ANALOG_TYPE;
if(m_Output_data.at(lRow).range > (sizeof(Output_Analog_Units_Array) / sizeof(Output_Analog_Units_Array[0])))
{
m_Output_data.at(lRow).range = 0;
bac_range_number_choose = 0;
}
}
else
{
bac_ranges_type = OUTPUT_RANGE_DIGITAL_TYPE;
if(m_Output_data.at(lRow).range > 30)
{
m_Output_data.at(lRow).range = 0;
bac_range_number_choose = 0;
}
}
//if(temp_cs.CompareNoCase(Units_Type[UNITS_TYPE_ANALOG])==0)
//{
initial_dialog = 3;
bac_range_number_choose = m_Output_data.at(lRow).range;
//bac_ranges_type = OUTPUT_RANGE_ANALOG_TYPE;
dlg.DoModal();
if(range_cancel)
{
PostMessage(WM_REFRESH_BAC_OUTPUT_LIST,lRow,REFRESH_ON_ITEM);//这里调用 刷新线程重新刷新会方便一点;
return ;
}
if(bac_range_number_choose == 0) //如果选择的是 unused 就认为是analog 的unused;这样 能显示对应的value;
{
m_Output_data.at(lRow).digital_analog = BAC_UNITS_ANALOG;
bac_ranges_type = OUTPUT_RANGE_ANALOG_TYPE;
}
if(bac_ranges_type == OUTPUT_RANGE_ANALOG_TYPE)
{
m_Output_data.at(lRow).digital_analog = BAC_UNITS_ANALOG;
m_Output_data.at(lRow).range = bac_range_number_choose;
m_output_list.SetItemText(lRow,OUTPUT_UNITE,Output_Analog_Units_Show[bac_range_number_choose]);
m_output_list.SetItemText(lRow,OUTPUT_RANGE,OutPut_List_Analog_Range[bac_range_number_choose]);
//m_output_list.SetItemText(lRow,OUTPUT_0_PERSENT,_T("0"));
//m_output_list.SetCellEnabled(lRow,OUTPUT_0_PERSENT,1);
//m_output_list.SetItemText(lRow,OUTPUT_100_PERSENT,_T("10"));
//m_output_list.SetCellEnabled(lRow,OUTPUT_100_PERSENT,1);
#if 0
CString cstemp_value;
float temp_float_value;
temp_float_value = m_Output_data.at(Changed_Item).value / 1000;
cstemp_value.Format(_T("%.2f"),temp_float_value);
m_output_list.SetItemText(Changed_Item,OUTPUT_VALUE,cstemp_value);
#endif
CString cstemp_value;
cstemp_value.Format(_T("%d"),m_Output_data.at(lRow).value);
m_output_list.SetItemText(lRow,OUTPUT_VALUE,cstemp_value);
}
else if((bac_ranges_type == VARIABLE_RANGE_DIGITAL_TYPE) || (bac_ranges_type == INPUT_RANGE_DIGITAL_TYPE) || (bac_ranges_type == OUTPUT_RANGE_DIGITAL_TYPE))
{
m_Output_data.at(lRow).digital_analog = BAC_UNITS_DIGITAL;
m_Output_data.at(lRow).range = bac_range_number_choose;
//m_output_list.SetItemText(lRow,OUTPUT_0_PERSENT,_T(""));
//m_output_list.SetCellEnabled(lRow,OUTPUT_0_PERSENT,0);
//m_output_list.SetItemText(lRow,OUTPUT_100_PERSENT,_T(""));
//m_output_list.SetCellEnabled(lRow,OUTPUT_100_PERSENT,0);
CStringArray temparray;
if((bac_range_number_choose >= 23) && (bac_range_number_choose <= 30))
{
//temp1.Format(_T("%s"), temp_unit_no_index[bac_range_number_choose - 23]);
temp1 = temp_unit_no_index[bac_range_number_choose - 23];
}
else
temp1 = Digital_Units_Array[bac_range_number_choose];//22 is the sizeof the array
SplitCStringA(temparray,temp1,_T("/"));
if(m_Output_data.at(lRow).control == 1)
{
if((temparray.GetSize()==2)&&(!temparray.GetAt(1).IsEmpty()))
{
m_output_list.SetItemText(lRow,OUTPUT_VALUE,temparray.GetAt(1));
}
}
else
{
if((temparray.GetSize()==2)&&(!temparray.GetAt(0).IsEmpty()))
{
m_output_list.SetItemText(lRow,OUTPUT_VALUE,temparray.GetAt(0));
}
}
m_output_list.SetItemText(lRow,OUTPUT_RANGE,temp1);
m_output_list.SetItemText(lRow,OUTPUT_UNITE,_T(""));//如果是数字单位 Unit 要清空;
}
}
else
{
return;
}
//return;
m_output_list.Set_Edit(false);
int cmp_ret = memcmp(&m_temp_output_data[lRow],&m_Output_data.at(lRow),sizeof(Str_out_point));
if(cmp_ret!=0)
{
m_output_list.SetItemBkColor(lRow,lCol,LIST_ITEM_CHANGED_BKCOLOR);
temp_task_info.Format(_T("Write Output List Item%d .Changed to \"%s\" "),lRow + 1,New_CString);
Post_Write_Message(g_bac_instance,WRITEOUTPUT_T3000,lRow,lRow,sizeof(Str_out_point),m_output_dlg_hwnd,temp_task_info,lRow,lCol);
}
*pResult = 0;
}
void CBacnetVariable::OnNMClickListVariable(NMHDR *pNMHDR, LRESULT *pResult)
{
LPNMITEMACTIVATE pNMItemActivate = reinterpret_cast<LPNMITEMACTIVATE>(pNMHDR);
// TODO: Add your control notification handler code here
long lRow,lCol;
m_variable_list.Set_Edit(true);
DWORD dwPos=GetMessagePos();//Get which line is click by user.Set the check box, when user enter Insert it will jump to program dialog
CPoint point( LOWORD(dwPos), HIWORD(dwPos));
m_variable_list.ScreenToClient(&point);
LVHITTESTINFO lvinfo;
lvinfo.pt=point;
lvinfo.flags=LVHT_ABOVE;
int nItem=m_variable_list.SubItemHitTest(&lvinfo);
lRow = lvinfo.iItem;
lCol = lvinfo.iSubItem;
if(lRow>m_variable_list.GetItemCount()) //如果点击区超过最大行号，则点击是无效的
return;
if(lRow<0)
return;
CString temp1;
m_row = lRow;
m_col = lCol;
memcpy_s(&m_temp_variable_data[lRow],sizeof(Str_variable_point),&m_Variable_data.at(lRow),sizeof(Str_variable_point));
CString New_CString;
CString temp_task_info;
if((lCol == VARIABLE_VALUE) &&(m_Variable_data.at(lRow).digital_analog == BAC_UNITS_DIGITAL ) && (m_Variable_data.at(lRow).auto_manual != BAC_AUTO))
{
CString temp1;
CStringArray temparray;
if((m_Variable_data.at(lRow).range < 23) &&(m_Variable_data.at(lRow).range !=0))
temp1 = Digital_Units_Array[m_Variable_data.at(lRow).range];
else if((m_Variable_data.at(lRow).range >=23) && (m_Variable_data.at(lRow).range <= 30))
{
if(receive_customer_unit)
temp1 = temp_unit_no_index[m_Variable_data.at(lRow).range - 23];
else
{
m_variable_list.Set_Edit(false);
return;
}
}
else
return;
SplitCStringA(temparray,temp1,_T("/"));
if(m_Variable_data.at(lRow).control == 0)
{
m_Variable_data.at(lRow).control = 1;
m_variable_list.SetItemText(lRow,VARIABLE_VALUE,temparray.GetAt(1));
New_CString = temparray.GetAt(1);
}
else
{
m_Variable_data.at(lRow).control = 0;
m_variable_list.SetItemText(lRow,VARIABLE_VALUE,temparray.GetAt(0));
New_CString = temparray.GetAt(0);
}
m_variable_list.Set_Edit(false);
temp_task_info.Format(_T("Write Variable List Item%d .Changed to \"%s\" "),lRow + 1,New_CString);
}
else if((lCol == VARIABLE_VALUE) &&(m_Variable_data.at(lRow).digital_analog == BAC_UNITS_ANALOG ) && (m_Variable_data.at(lRow).auto_manual == BAC_MANUAL) && (m_Variable_data.at(lRow).range == 20))
{
m_variable_list.Set_Edit(false);
m_variable_time_picker.ShowWindow(SW_SHOW);
CRect list_rect,win_rect;
m_variable_list.GetWindowRect(list_rect);
GetWindowRect(win_rect);
CRect myrect;
m_variable_list.GetSubItemRect(lRow,lCol,LVIR_BOUNDS,myrect);
myrect.left = myrect.left + list_rect.left - win_rect.left +2 ;
myrect.right = myrect.right + list_rect.left - win_rect.left + 2;
myrect.top = myrect.top + 24;
myrect.bottom = myrect.bottom + 26;
m_variable_time_picker.BringWindowToTop();
m_variable_time_picker.MoveWindow(myrect);
CString Temp_CString = m_variable_list.GetItemText(lRow,lCol);
CStringArray TEMPCS;
int temp_hour,temp_minute,temp_second;
SplitCStringA(TEMPCS, Temp_CString, _T(":"));
if((int)TEMPCS.GetSize() <3)
{
temp_hour = 0;
temp_minute = 0;
temp_second = 0;
CTime TimeTemp(2016,1,1,temp_hour,temp_minute,0);
m_variable_time_picker.SetFormat(_T("HH:mm:ss"));
m_variable_time_picker.SetTime(&TimeTemp);
m_variable_time_picker.SetFocus();
}
else
{
temp_hour = _wtoi(TEMPCS.GetAt(0));
temp_minute = _wtoi(TEMPCS.GetAt(1));
temp_second = _wtoi(TEMPCS.GetAt(2));
if(temp_hour >=24)
temp_hour = 0;
if(temp_minute >=60)
temp_minute = 0;
if(temp_second >= 60)
temp_second = 0;
CTime TimeTemp(2016,1,1,temp_hour,temp_minute,temp_second);
m_variable_time_picker.SetFormat(_T("HH:mm:ss"));
m_variable_time_picker.SetTime(&TimeTemp);
m_variable_time_picker.SetFocus();
}
m_variable_list.SetItemText(lRow,lCol,_T(""));
m_variable_time_picker.Invalidate();
SetTimer(2,100,NULL);
}
else if(lCol == VARIABLE_VALUE)
{
if(m_Variable_data.at(lRow).auto_manual == BAC_AUTO)
{
m_variable_list.Set_Edit(false);
return;
}
}
else if(lCol == VARIABLE_AUTO_MANUAL)
{
if(m_Variable_data.at(lRow).auto_manual == 0)
{
m_Variable_data.at(lRow).auto_manual = 1;
m_variable_list.SetItemText(lRow,VARIABLE_AUTO_MANUAL,_T("Manual"));
New_CString = _T("Manual");
}
else
{
m_Variable_data.at(lRow).auto_manual = 0;
m_variable_list.SetItemText(lRow,VARIABLE_AUTO_MANUAL,_T("Auto"));
New_CString = _T("Auto");
}
temp_task_info.Format(_T("Write Variable List Item%d .Changed to \"%s\" "),lRow + 1,New_CString);
}
else if(lCol == VARIABLE_UNITE)
{
BacnetRange dlg;
//点击产品的时候 需要读customer units，老的产品firmware 说不定没有 这些，所以不强迫要读到;
if(!read_customer_unit)
{
int temp_invoke_id = -1;
int send_status = true;
int resend_count = 0;
for (int z=0;z<3;z++)
{
do
{
resend_count ++;
if(resend_count>5)
{
send_status = false;
break;
}
temp_invoke_id = GetPrivateData(
g_bac_instance,
READUNIT_T3000,
0,
BAC_CUSTOMER_UNITS_COUNT - 1,
sizeof(Str_Units_element));
Sleep(SEND_COMMAND_DELAY_TIME);
} while (g_invoke_id<0);
if(send_status)
{
for (int z=0;z<1000;z++)
{
Sleep(1);
if(tsm_invoke_id_free(temp_invoke_id))
{
read_customer_unit = true;
break;
}
else
continue;
}
}
if(read_customer_unit)
break;
}
}
if(m_Variable_data.at(lRow).digital_analog == BAC_UNITS_ANALOG)
{
bac_ranges_type = VARIABLE_RANGE_ANALOG_TYPE;
if(m_Variable_data.at(lRow).range > (sizeof(Variable_Analog_Units_Array) / sizeof(Variable_Analog_Units_Array[0])))
{
m_Variable_data.at(lRow).range = 0;
bac_range_number_choose = 0;
}
}
else
{
bac_ranges_type = VARIABLE_RANGE_DIGITAL_TYPE;
if(m_Variable_data.at(lRow).range > 30)
{
m_Variable_data.at(lRow).range = 0;
bac_range_number_choose = 0;
}
}
initial_dialog = 1;
bac_range_number_choose = m_Variable_data.at(lRow).range;
dlg.DoModal();
if(range_cancel)
{
PostMessage(WM_REFRESH_BAC_VARIABLE_LIST,lRow,REFRESH_ON_ITEM);//这里调用 刷新线程重新刷新会方便一点;
return ;
}
if(bac_range_number_choose == 0) //如果选择的是 unused 就认为是analog 的unused;这样 能显示对应的value;
{
m_Variable_data.at(lRow).digital_analog = BAC_UNITS_ANALOG;
bac_ranges_type = VARIABLE_RANGE_ANALOG_TYPE;
}
if(bac_ranges_type == VARIABLE_RANGE_ANALOG_TYPE)
{
m_Variable_data.at(lRow).digital_analog = BAC_UNITS_ANALOG;
m_Variable_data.at(lRow).range = bac_range_number_choose;
m_variable_list.SetItemText(lRow,lCol,Variable_Analog_Units_Array[bac_range_number_choose]);
if(m_Variable_data.at(lRow).range == 20) //如果是时间;
{
char temp_char[50];
int time_seconds = m_Variable_data.at(lRow).value / 1000;
intervaltotextfull(temp_char,time_seconds,0,0);
CString temp_11;
MultiByteToWideChar( CP_ACP, 0, temp_char, strlen(temp_char) + 1,
temp_11.GetBuffer(MAX_PATH), MAX_PATH );
temp_11.ReleaseBuffer();
m_variable_list.SetItemText(lRow,VARIABLE_VALUE,temp_11);
}
else
{
CString cstemp_value;
float temp_float_value;
temp_float_value = ((float)m_Variable_data.at(lRow).value) / 1000;
cstemp_value.Format(_T("%.3f"),temp_float_value);
m_variable_list.SetItemText(lRow,VARIABLE_VALUE,cstemp_value);
/* cstemp_value.Format(_T("%d"),m_Variable_data.at(Changed_Item).value);
m_variable_list.SetItemText(Changed_Item,VARIABLE_VALUE,cstemp_value);*/
}
}
else if((bac_ranges_type == VARIABLE_RANGE_DIGITAL_TYPE) || (bac_ranges_type == INPUT_RANGE_DIGITAL_TYPE) || (bac_ranges_type == OUTPUT_RANGE_DIGITAL_TYPE))
{
m_Variable_data.at(lRow).digital_analog = BAC_UNITS_DIGITAL;
m_Variable_data.at(lRow).range = bac_range_number_choose;
CStringArray temparray;
if((bac_range_number_choose >= 23) && (bac_range_number_choose <= 30))
{
//temp1.Format(_T("%s"), temp_unit_no_index[bac_range_number_choose - 23]);
temp1 = temp_unit_no_index[bac_range_number_choose - 23];
}
else
temp1 = Digital_Units_Array[bac_range_number_choose];//22 is the sizeof the array
SplitCStringA(temparray,temp1,_T("/"));
if(m_Variable_data.at(lRow).control == 1)
{
if((temparray.GetSize()==2)&&(!temparray.GetAt(1).IsEmpty()))
{
m_variable_list.SetItemText(lRow,VARIABLE_VALUE,temparray.GetAt(1));
}
}
else
{
if((temparray.GetSize()==2)&&(!temparray.GetAt(0).IsEmpty()))
{
m_variable_list.SetItemText(lRow,VARIABLE_VALUE,temparray.GetAt(0));
}
}
m_variable_list.SetItemText(lRow,VARIABLE_UNITE,temp1);
}
}
else
{
return;
}
int cmp_ret = memcmp(&m_temp_variable_data[lRow],&m_Variable_data.at(lRow),sizeof(Str_variable_point));
if(cmp_ret!=0)
{
m_variable_list.SetItemBkColor(lRow,lCol,LIST_ITEM_CHANGED_BKCOLOR);
Post_Write_Message(g_bac_instance,WRITEVARIABLE_T3000,lRow,lRow,sizeof(Str_variable_point),m_variable_dlg_hwnd,temp_task_info,lRow,lCol);
}
*pResult = 0;
}
