コード例 #1
0
void ExprEngine::VisitLogicalExpr(const BinaryOperator* B, ExplodedNode *Pred,
                                  ExplodedNodeSet &Dst) {
  assert(B->getOpcode() == BO_LAnd ||
         B->getOpcode() == BO_LOr);

  StmtNodeBuilder Bldr(Pred, Dst, *currentBuilderContext);
  ProgramStateRef state = Pred->getState();

  ExplodedNode *N = Pred;
  while (!isa<BlockEntrance>(N->getLocation())) {
    ProgramPoint P = N->getLocation();
    assert(isa<PreStmt>(P)|| isa<PreStmtPurgeDeadSymbols>(P));
    (void) P;
    assert(N->pred_size() == 1);
    N = *N->pred_begin();
  }
  assert(N->pred_size() == 1);
  N = *N->pred_begin();
  BlockEdge BE = cast<BlockEdge>(N->getLocation());
  SVal X;

  // Determine the value of the expression by introspecting how we
  // got this location in the CFG.  This requires looking at the previous
  // block we were in and what kind of control-flow transfer was involved.
  const CFGBlock *SrcBlock = BE.getSrc();
  // The only terminator (if there is one) that makes sense is a logical op.
  CFGTerminator T = SrcBlock->getTerminator();
  if (const BinaryOperator *Term = cast_or_null<BinaryOperator>(T.getStmt())) {
    (void) Term;
    assert(Term->isLogicalOp());
    assert(SrcBlock->succ_size() == 2);
    // Did we take the true or false branch?
    unsigned constant = (*SrcBlock->succ_begin() == BE.getDst()) ? 1 : 0;
    X = svalBuilder.makeIntVal(constant, B->getType());
  }
  else {
    // If there is no terminator, by construction the last statement
    // in SrcBlock is the value of the enclosing expression.
    assert(!SrcBlock->empty());
    CFGStmt Elem = cast<CFGStmt>(*SrcBlock->rbegin());
    const Stmt *S = Elem.getStmt();
    X = N->getState()->getSVal(S, Pred->getLocationContext());
  }

  Bldr.generateNode(B, Pred, state->BindExpr(B, Pred->getLocationContext(), X));
}
コード例 #2
0
void ExprEngine::VisitLogicalExpr(const BinaryOperator* B, ExplodedNode *Pred,
                                  ExplodedNodeSet &Dst) {
  assert(B->getOpcode() == BO_LAnd ||
         B->getOpcode() == BO_LOr);

  StmtNodeBuilder Bldr(Pred, Dst, *currBldrCtx);
  ProgramStateRef state = Pred->getState();

  ExplodedNode *N = Pred;
  while (!N->getLocation().getAs<BlockEntrance>()) {
    ProgramPoint P = N->getLocation();
    assert(P.getAs<PreStmt>()|| P.getAs<PreStmtPurgeDeadSymbols>());
    (void) P;
    assert(N->pred_size() == 1);
    N = *N->pred_begin();
  }
  assert(N->pred_size() == 1);
  N = *N->pred_begin();
  BlockEdge BE = N->getLocation().castAs<BlockEdge>();
  SVal X;

  // Determine the value of the expression by introspecting how we
  // got this location in the CFG.  This requires looking at the previous
  // block we were in and what kind of control-flow transfer was involved.
  const CFGBlock *SrcBlock = BE.getSrc();
  // The only terminator (if there is one) that makes sense is a logical op.
  CFGTerminator T = SrcBlock->getTerminator();
  if (const BinaryOperator *Term = cast_or_null<BinaryOperator>(T.getStmt())) {
    (void) Term;
    assert(Term->isLogicalOp());
    assert(SrcBlock->succ_size() == 2);
    // Did we take the true or false branch?
    unsigned constant = (*SrcBlock->succ_begin() == BE.getDst()) ? 1 : 0;
    X = svalBuilder.makeIntVal(constant, B->getType());
  }
  else {
    // If there is no terminator, by construction the last statement
    // in SrcBlock is the value of the enclosing expression.
    // However, we still need to constrain that value to be 0 or 1.
    assert(!SrcBlock->empty());
    CFGStmt Elem = SrcBlock->rbegin()->castAs<CFGStmt>();
    const Expr *RHS = cast<Expr>(Elem.getStmt());
    SVal RHSVal = N->getState()->getSVal(RHS, Pred->getLocationContext());

    if (RHSVal.isUndef()) {
      X = RHSVal;
    } else {
      DefinedOrUnknownSVal DefinedRHS = RHSVal.castAs<DefinedOrUnknownSVal>();
      ProgramStateRef StTrue, StFalse;
      llvm::tie(StTrue, StFalse) = N->getState()->assume(DefinedRHS);
      if (StTrue) {
        if (StFalse) {
          // We can't constrain the value to 0 or 1.
          // The best we can do is a cast.
          X = getSValBuilder().evalCast(RHSVal, B->getType(), RHS->getType());
        } else {
          // The value is known to be true.
          X = getSValBuilder().makeIntVal(1, B->getType());
        }
      } else {
        // The value is known to be false.
        assert(StFalse && "Infeasible path!");
        X = getSValBuilder().makeIntVal(0, B->getType());
      }
    }
  }
  Bldr.generateNode(B, Pred, state->BindExpr(B, Pred->getLocationContext(), X));
}
コード例 #3
0
ファイル: ExprEngineC.cpp プロジェクト: PolyJIT/clang
void ExprEngine::VisitLogicalExpr(const BinaryOperator* B, ExplodedNode *Pred,
                                  ExplodedNodeSet &Dst) {
  assert(B->getOpcode() == BO_LAnd ||
         B->getOpcode() == BO_LOr);

  StmtNodeBuilder Bldr(Pred, Dst, *currBldrCtx);
  ProgramStateRef state = Pred->getState();

  if (B->getType()->isVectorType()) {
    // FIXME: We do not model vector arithmetic yet. When adding support for
    // that, note that the CFG-based reasoning below does not apply, because
    // logical operators on vectors are not short-circuit. Currently they are
    // modeled as short-circuit in Clang CFG but this is incorrect.
    // Do not set the value for the expression. It'd be UnknownVal by default.
    Bldr.generateNode(B, Pred, state);
    return;
  }

  ExplodedNode *N = Pred;
  while (!N->getLocation().getAs<BlockEntrance>()) {
    ProgramPoint P = N->getLocation();
    assert(P.getAs<PreStmt>()|| P.getAs<PreStmtPurgeDeadSymbols>());
    (void) P;
    assert(N->pred_size() == 1);
    N = *N->pred_begin();
  }
  assert(N->pred_size() == 1);
  N = *N->pred_begin();
  BlockEdge BE = N->getLocation().castAs<BlockEdge>();
  SVal X;

  // Determine the value of the expression by introspecting how we
  // got this location in the CFG.  This requires looking at the previous
  // block we were in and what kind of control-flow transfer was involved.
  const CFGBlock *SrcBlock = BE.getSrc();
  // The only terminator (if there is one) that makes sense is a logical op.
  CFGTerminator T = SrcBlock->getTerminator();
  if (const BinaryOperator *Term = cast_or_null<BinaryOperator>(T.getStmt())) {
    (void) Term;
    assert(Term->isLogicalOp());
    assert(SrcBlock->succ_size() == 2);
    // Did we take the true or false branch?
    unsigned constant = (*SrcBlock->succ_begin() == BE.getDst()) ? 1 : 0;
    X = svalBuilder.makeIntVal(constant, B->getType());
  }
  else {
    // If there is no terminator, by construction the last statement
    // in SrcBlock is the value of the enclosing expression.
    // However, we still need to constrain that value to be 0 or 1.
    assert(!SrcBlock->empty());
    CFGStmt Elem = SrcBlock->rbegin()->castAs<CFGStmt>();
    const Expr *RHS = cast<Expr>(Elem.getStmt());
    SVal RHSVal = N->getState()->getSVal(RHS, Pred->getLocationContext());

    if (RHSVal.isUndef()) {
      X = RHSVal;
    } else {
      // We evaluate "RHSVal != 0" expression which result in 0 if the value is
      // known to be false, 1 if the value is known to be true and a new symbol
      // when the assumption is unknown.
      nonloc::ConcreteInt Zero(getBasicVals().getValue(0, B->getType()));
      X = evalBinOp(N->getState(), BO_NE, 
                    svalBuilder.evalCast(RHSVal, B->getType(), RHS->getType()),
                    Zero, B->getType());
    }
  }
  Bldr.generateNode(B, Pred, state->BindExpr(B, Pred->getLocationContext(), X));
}