コード例 #1
1
ファイル: Grab.cpp プロジェクト: mattroos/Basler
int main(int argc, char* argv[])
{
    // The exit code of the sample application.
    int exitCode = 0;

    // Automagically call PylonInitialize and PylonTerminate to ensure the pylon runtime system
    // is initialized during the lifetime of this object.
    Pylon::PylonAutoInitTerm autoInitTerm;

    //cv::Mat theFrame;

    try
    {
        // Create an instant camera object with the camera device found first.
        //CInstantCamera camera( CTlFactory::GetInstance().CreateFirstDevice());
        CBaslerUsbInstantCamera camera( CTlFactory::GetInstance().CreateFirstDevice()); //MJR

        // Print the model name of the camera.
        cout << "Using device " << camera.GetDeviceInfo().GetModelName() << endl;

        // The parameter MaxNumBuffer can be used to control the count of buffers
        // allocated for grabbing. The default value of this parameter is 10.
        camera.MaxNumBuffer = 5;

        // Start the grabbing of c_countOfImagesToGrab images.
        // The camera device is parameterized with a default configuration which
        // sets up free-running continuous acquisition.
        camera.StartGrabbing( c_countOfImagesToGrab);

        // This smart pointer will receive the grab result data.
        CGrabResultPtr ptrGrabResult;

        // Camera.StopGrabbing() is called automatically by the RetrieveResult() method
        // when c_countOfImagesToGrab images have been retrieved.
        tStart = clock();
        while (camera.IsGrabbing())
        {
            // Wait for an image and then retrieve it. A timeout of 5000 ms is used.
            camera.RetrieveResult( 5000, ptrGrabResult, TimeoutHandling_ThrowException);

            // Image grabbed successfully?
            if (ptrGrabResult->GrabSucceeded())
            {
                // Access the image data.
                cout << "SizeX: " << ptrGrabResult->GetWidth() << endl;
                cout << "SizeY: " << ptrGrabResult->GetHeight() << endl;
                const uint8_t *pImageBuffer = (uint8_t *) ptrGrabResult->GetBuffer();
                cout << "Gray value of first pixel: " << (uint32_t) pImageBuffer[0] << endl << endl;

#ifdef PYLON_WIN_BUILD
                // Display the grabbed image.
                Pylon::DisplayImage(1, ptrGrabResult);
#endif

                // // Save the image using Pylon API
                // CImagePersistence::Save( ImageFileFormat_Png, "GrabbedImage.png", ptrGrabResult);


                // suppose your camera is monochrome... get a pointer to pylon image 
                //const pylon::uint8_t *pImageBuffer = (uint8_t *)ptrGrabResult->GetBuffer();
                int frameCols = ptrGrabResult->GetWidth();
                int frameRows = ptrGrabResult->GetHeight();
                // Map the pylon image buffer to a cv::Mat (create a cv::Mat from external buffer)
                
                //theFrame = cv::Mat(cv::Size(frameCols, frameRows), CV_8UC1, (void*)pImageBuffer, cv::Mat::AUTO_STEP);
                //Mat theFrame = cv::Mat(cv::Size(frameCols, frameRows), CV_8UC1, (void*)pImageBuffer);
                Mat theFrame = cv::Mat(frameRows, frameCols, CV_8UC1);
                memcpy(theFrame.ptr(),(uint8_t *)ptrGrabResult->GetBuffer(),frameCols*frameRows);


                // Save openCV Mat frame
                char str[15];
                tCount = clock() - tStart;
                sprintf(str, "%f seconds", ((float)tCount)/CLOCKS_PER_SEC);
                printf("%ld: %f seconds\n", tCount, ((float)tCount)/CLOCKS_PER_SEC);
                sleep(1);
                tCount = clock() - tStart;
                sprintf(str, "%f seconds", ((float)tCount)/CLOCKS_PER_SEC);
                printf("%ld: %f seconds\n", tCount, ((float)tCount)/CLOCKS_PER_SEC);

                putText(theFrame,str,cvPoint(30,100),FONT_HERSHEY_SIMPLEX,2,cvScalar(200,200,250),3,CV_AA);
                imwrite("GrabbedImageCV.png",theFrame);



                // keep a copy of it
                //cv::Mat myFrame;
                //theFrame.copyTo(myFrame); // myFrame life cycle is now under your control

                // // Convert of opencv format and display
                // CImageFormatConverter fc;
                // //fc.OutputPixelFormat = PixelType_BGR8packed;
                // fc.OutputPixelFormat = PixelType_Mono8;
                // CPylonImage image;
                // fc.Convert(image, ptrGrabResult);

                // Mat cv_img = cv::Mat(ptrGrabResult->GetHeight(), ptrGrabResult->GetWidth(), CV_8UC1,(uint8_t*)image.GetBuffer());
                // //imshow(src_window,cv_img);  // display the image in OpenCV image window
                // //waitKey(1);

            }
            else
            {
                cout << "Error: " << ptrGrabResult->GetErrorCode() << " " << ptrGrabResult->GetErrorDescription() << endl;
            }
        }
    }
    catch (GenICam::GenericException &e)
    {
        // Error handling.
        cerr << "An exception occurred." << endl
        << e.GetDescription() << endl;
        exitCode = 1;
    }

    // Comment the following two lines to disable waiting on exit.
    // cerr << endl << "Press Enter to exit." << endl;
    // while( cin.get() != '\n');

    return exitCode;
}
コード例 #2
0
void CBaslerFormatConverter::convertMONOtoCVMONO(IplImage *imgDestination,const CGrabResultPtr& imageSource)
{
	imgDestination->nSize = sizeof(IplImage);
	imgDestination->ID = 0;
	imgDestination->dataOrder = 0;
	imgDestination->origin = 0;	
	imgDestination->roi = NULL;
	imgDestination->maskROI = NULL;
	imgDestination->imageId = NULL;
	imgDestination->tileInfo = NULL;
	memcpy(imgDestination->imageData,imageSource->GetBuffer(),imageSource->GetPayloadSize());
	imgDestination->imageDataOrigin = imgDestination->imageData;
}
コード例 #3
0
ファイル: Grab.cpp プロジェクト: AndreyYa/Basler_mods
	virtual void OnImageGrabbed(CInstantCamera& camera, const CGrabResultPtr& ptrGrabResult)
	{
		intptr_t cameraContextValue = ptrGrabResult->GetCameraContext();

		CBaslerUsbGrabResultPtr ptrGrabResultUsb = ptrGrabResult;

		#ifdef PYLON_WIN_BUILD
			Pylon::DisplayImage(cameraContextValue, ptrGrabResultUsb);
		#endif

		if (G_State == Burst)
		{
			int _frame_index = 0;
			_frame_index = _PC_captured_frame_count[cameraContextValue];
			
			cout << "Frame Grabbed      #: " << _frame_index << endl;

			if (IsReadable(ptrGrabResultUsb->ChunkTimestamp))
			{
				_PC_frame_time_table[2 * cameraContextValue + 1][_frame_index] = 0.000000001*(double)ptrGrabResultUsb->ChunkTimestamp.GetValue();
			}
			
			
			_Grab_results[cameraContextValue][_frame_index] = ptrGrabResultUsb;

			

			_PC_captured_frame_count[cameraContextValue] += 1;

		}
	}
コード例 #4
0
void PylonCamera::execute()
{
    if(!mCam) {
        return;
    }

    try {
        updateParams();
        // This smart pointer will receive the grab result data.
        CGrabResultPtr ptrGrabResult;
        // Wait for an image and then retrieve it. A timeout of 1000 ms is used.
        mCam->RetrieveResult(1000, ptrGrabResult);

        // Image grabbed successfully=
        if (ptrGrabResult && ptrGrabResult->GrabSucceeded()) {
            CPylonImage target;
            // Convert to correct format for vision system
            CImageFormatConverter converter;
            converter.OutputPixelFormat = PixelType_BGR8packed;
            converter.OutputBitAlignment = OutputBitAlignment_MsbAligned;
            converter.Convert(target, ptrGrabResult);

            // Now the grab result can be released. The grab result buffer is now
            // only held by the pylon image.
            ptrGrabResult.Release();

            // Create an RGBImage from converted data
            RgbImage image(target.GetHeight(), target.GetWidth(), (uchar *)target.GetBuffer());
            mOut.send(image.clone());

            // The Release() method can be used to release any data.
            target.Release();
        }
    }
    catch (GenICam::GenericException &e) {
        /*stop();
        deinitialize();*/
        throw std::runtime_error(e.GetDescription());
    }
    catch(const std::exception& e) {
        throw std::runtime_error(e.what());
    }
}
コード例 #5
0
	void CCameraBasler::continuousAcquireFreeRunning(int index)
	{
		IplImage *img;
		CGrabResultPtr ptrGrabResult;
		std::pair<char*,IplImage*> pairTemp;
		unsigned int indiceImagenes = 0;
	
		
		while (m_cameraState == CVCCameraInterface::GRABBING)
		{
			try
			{
				m_Camera->RetrieveResult(INFINITE,ptrGrabResult,TimeoutHandling_Return);
				if (ptrGrabResult->GrabSucceeded())
				{
					img = cvCreateImage(cvSize(ptrGrabResult->GetWidth(),ptrGrabResult->GetHeight()),8,3);
					CBaslerFormatConverter::convertCOLORtoCVRGB(img,ptrGrabResult);

					// Construct image file name
					char *str = new char[100];			
					sprintf(str,"Images\\V\\Visible%d.png",indiceImagenes);
					// Put name and image in a pair
					pairTemp.first = str;
					pairTemp.second = img;
					// Enqueue pair of <nameOfFileToSave,image> in the SaveImageProcess 
					// Is a singleton thread save design to enqueue and process all images.
					// Index refers to the "id" of the queue. Each queue will have a thread.
					CVCCameraInterface::SaveImagesProcess::Instance()->Add(index,pairTemp);
					// Increment the number of the actual image. Used to make the filename
					indiceImagenes++;
				}
				else
				{
					std::cout << "Error: [Basler] :" << ptrGrabResult->GetErrorCode() << " " << ptrGrabResult->GetErrorDescription() << std::endl;
				}

			}
			catch(...)
			{
				std::cerr << "ERROR: [Basler] Acquiring continuous images." << std::endl;
			}
		}
		try
		{
			m_Camera->StopGrabbing();
		}
		catch(...)
		{
			std::cerr << "ERROR: [Basler] Stopping continuous acquisition." << std::endl;
		}
		
	}
コード例 #6
0
ファイル: Grab.cpp プロジェクト: mattroos/Basler
int main(int argc, char* argv[])
{
    // The exit code of the sample application.
    int exitCode = 0;

    // Automagically call PylonInitialize and PylonTerminate to ensure the pylon runtime system
    // is initialized during the lifetime of this object.
    Pylon::PylonAutoInitTerm autoInitTerm;

    try
    {
        // Create an instant camera object with the camera device found first.
        CInstantCamera camera( CTlFactory::GetInstance().CreateFirstDevice());

        // Print the model name of the camera.
        cout << "Using device " << camera.GetDeviceInfo().GetModelName() << endl;

        // The parameter MaxNumBuffer can be used to control the count of buffers
        // allocated for grabbing. The default value of this parameter is 10.
        camera.MaxNumBuffer = 5;

        // Start the grabbing of c_countOfImagesToGrab images.
        // The camera device is parameterized with a default configuration which
        // sets up free-running continuous acquisition.
        camera.StartGrabbing( c_countOfImagesToGrab);

        // This smart pointer will receive the grab result data.
        CGrabResultPtr ptrGrabResult;

        // Camera.StopGrabbing() is called automatically by the RetrieveResult() method
        // when c_countOfImagesToGrab images have been retrieved.
        while ( camera.IsGrabbing())
        {
            // Wait for an image and then retrieve it. A timeout of 5000 ms is used.
            camera.RetrieveResult( 5000, ptrGrabResult, TimeoutHandling_ThrowException);

            // Image grabbed successfully?
            if (ptrGrabResult->GrabSucceeded())
            {
                // Access the image data.
                cout << "SizeX: " << ptrGrabResult->GetWidth() << endl;
                cout << "SizeY: " << ptrGrabResult->GetHeight() << endl;
                const uint8_t *pImageBuffer = (uint8_t *) ptrGrabResult->GetBuffer();
                cout << "Gray value of first pixel: " << (uint32_t) pImageBuffer[0] << endl << endl;

#ifdef PYLON_WIN_BUILD
                // Display the grabbed image.
                Pylon::DisplayImage(1, ptrGrabResult);
#endif
            }
            else
            {
                cout << "Error: " << ptrGrabResult->GetErrorCode() << " " << ptrGrabResult->GetErrorDescription() << endl;
            }
        }
    }
    catch (GenICam::GenericException &e)
    {
        // Error handling.
        cerr << "An exception occurred." << endl
        << e.GetDescription() << endl;
        exitCode = 1;
    }

    // Comment the following two lines to disable waiting on exit.
    cerr << endl << "Press Enter to exit." << endl;
    while( cin.get() != '\n');

    return exitCode;
}
コード例 #7
0
ファイル: grab.cpp プロジェクト: ceezeh/pylontest
int main(int argc, char* argv[])
{

  ros::init(argc, argv, "grab");

          ros::NodeHandle n;

          ros::Rate loop_rate(10);

// The exit code of the sample application.
int exitCode = 0;

// Automagically call PylonInitialize and PylonTerminate to ensure
// the pylon runtime system is initialized during the lifetime of this object.
Pylon::PylonAutoInitTerm autoInitTerm;


CGrabResultPtr ptrGrabResult;
namedWindow("CV_Image",WINDOW_AUTOSIZE);
try
{

    CInstantCamera camera( CTlFactory::GetInstance().CreateFirstDevice());
    cout << "Using device " << camera.GetDeviceInfo().GetModelName() << endl;
     camera.Open();

    GenApi::CIntegerPtr width(camera.GetNodeMap().GetNode("Width"));
     GenApi::CIntegerPtr height(camera.GetNodeMap().GetNode("Height"));
     Mat cv_img(width->GetValue(), height->GetValue(), CV_8UC3);

    camera.StartGrabbing();
    CPylonImage image;
    CImageFormatConverter fc;
     fc.OutputPixelFormat = PixelType_RGB8packed;

    while(camera.IsGrabbing()){
        camera.RetrieveResult( 500, ptrGrabResult, TimeoutHandling_ThrowException);
        if (ptrGrabResult->GrabSucceeded()){
                 fc.Convert(image, ptrGrabResult);

                cv_img = cv::Mat(ptrGrabResult->GetHeight(),     ptrGrabResult->GetWidth(), CV_8UC3,(uint8_t*)image.GetBuffer());
                imshow("CV_Image",cv_img);
                  waitKey(1);
                if(waitKey(30)==27){
                      camera.StopGrabbing();
                }
        }
        ros::spinOnce();

                        loop_rate.sleep();
    }

}

catch (GenICam::GenericException &e)
{
    // Error handling.
    cerr << "An exception occurred." << endl
    << e.GetDescription() << endl;
    exitCode = 1;
}

// Comment the following two lines to disable waiting on exit
cerr << endl << "Press Enter to exit." << endl;
while( cin.get() != '\n');

return exitCode;
 }
コード例 #8
0
int main(int argc, char* argv[])
{
	//------------------------//
	//       Main Code	      //
	//------------------------//

	// The exit code of the sample application.
	int exitCode = 0;
	system("CLS");

	cout << "*------------------------------------------------------*" << endl;
	cout << "*******   Program by S.E Lansbergen, June 2016  ********" << endl;
	cout << "*------------------------------------------------------*" << endl;

	//------------------------//
	// Configuration variable //
	//------------------------//

	// Config file
	const char* open_config = "config_grabpupilsize.cfg";

	// INI file (containing default start-up values)
	const char* open_ini = "default.ini";


	//------------------------//
	//	R/W default ini file  //	
	//------------------------//

	string def_prethres;
	string def_mainthres;
	string def_roiheigth;
	string def_roiwidth;
	string def_roistartx;
	string def_roistarty;
	string def_itterations;
	string def_pupil_max;
	string def_pupil_min;

	// create or open an ini file
	INI ini(open_ini);

	// load INI file
	if (ini.is_open()) { // The file exists, and is open for input

						 // get default threshold values
		def_prethres = ini.property("thresholding", "pre-threshold");
		def_mainthres = ini.property("thresholding", "main-threshold");

		// get default ROI values
		def_roiheigth = ini.property("ROI", "height");
		def_roiwidth = ini.property("ROI", "width");
		def_roistartx = ini.property("ROI", "startx");
		def_roistarty = ini.property("ROI", "starty");

		// get default closing itteration value
		def_itterations = ini.property("close", "itterations");

		// get default min and max pupil size values
		def_pupil_max = ini.property("pupil_size", "pupil_max");
		def_pupil_min = ini.property("pupil_size", "pupil_min");

		cout << endl << endl << " *** default.ini loaded ***" << endl;
	}
	else
	{
		cout << endl << " *** default.ini file is missing, program aborted! *** " << endl;
		cout << " *** go to Github and download default.ini, put this in the executable root dir *** " << endl;
		return 1;
	}

	//-------------------//
	// Defualt variables //
	//-------------------//

	// default hard coded settings if Config.cfg file is not present or in-complete/commented
	const char* thres_name = "THRESH_BINARY";
	const char* save_path = "c:/output.avi";
	const char* save_path_num = "c:/output.txt";
	const char* save_path_ori = "c:/original.avi";
	string sav_pat = "c:/output.avi";
	string sav_pat_num = "c:/output.txt";;
	string sav_pat_ori = "c:/original.avi";
	string save_path_xy = "c:/xy_postion.txt";
	bool show_screen_info = 1;
	bool save_video = 0;
	bool save_radius = 0;
	bool save_original = 0;
	bool ROI_start_auto = 1;
	bool original_image = 1;
	bool blurred_image = 0;
	bool thresholded_image = 0;
	bool closed_image = 0;
	bool end_result_image = 1;
	bool show_ost = 0;
	bool pre_threshold_image = 0;
	bool crosshair = 0;
	bool calibrate = 0;
	ThresholdTypes thres_type = THRESH_BINARY;
	int cFramesPerSecond = 20;
	int main_pre_threshold = 20;
	int thres_mode = 0;
	int ROI_start_x;
	int ROI_start_y;
	int width_SE = 3;
	int heigth_SE = 3;
	int heigth_blur = 3;
	int width_blur = 3;
	int pupil_min = 15;
	int pupil_max = 55;
	int pre_threshold = 100;
	int itterations_close = 3;
	int cali_x_a = 280;
	int cali_x_b = 350;
	int cali_y_a = 100;
	int cali_y_b = 200;
	Size ROI_dimensions = Size(150, 150);
	Size ROI_start;
	Size blur_dimensions = Size(width_SE, heigth_SE);
	Size SE_morph = Size(width_SE, heigth_SE);
	double pupil_aspect_ratio = 1.5;
	double size_text = 0.5;
	double pi = 3.14159;
	uint32_t time, frames;
	Point pupil_position;

	//---------------------//
	// Remaining variables //
	//---------------------//

	// video writer output
	VideoWriter roi_end_result, original;

	// images for processing
	Mat thres;
	Mat close;
	Mat blur;
	Mat roi_eye;
	Mat pre_thres;
	Mat aim;
	Mat cali;

	// variables for numerical output
	ofstream output_end_result, output_xy;
	ostringstream strs, ost1, ost2, ost3;
	string radius, size_roi, frame_rate, output_file;


	//-------------------------//
	// read configuration file //
	//-------------------------//

	// read config file
	ifstream ifile(open_config);
	if (ifile) { // The file exists, and is open for input

		ConfigFile cfg(open_config);

		// check for existance and replace defualt value
		if (cfg.keyExists("show_screen_info") == true) { // get screen info on/off
			show_screen_info = cfg.getValueOfKey<bool>("show_screen_info");
		}
		if (cfg.keyExists("save_video") == true) { // get video save_file info
			save_video = cfg.getValueOfKey<bool>("save_video");
		}
		if (cfg.keyExists("save_radius") == true) { // get numerical save_file info
			save_radius = cfg.getValueOfKey<bool>("save_radius");
		}
		if (cfg.keyExists("save_original") == true) { // get save original stream info
			save_original = cfg.getValueOfKey<bool>("save_original");
		}
		if (cfg.keyExists("frames_per_sec") == true) { // get frames per second
			cFramesPerSecond = cfg.getValueOfKey<int>("frames_per_sec");
		}
		if (cfg.keyExists("save_path_vid") == true) { // get video output file name & path
			sav_pat = cfg.getValueOfKey<string>("save_path_vid");
			save_path = sav_pat.c_str();
		}
		if (cfg.keyExists("save_path_num") == true) { // get numerical output file name & path
			sav_pat_num = cfg.getValueOfKey<string>("save_path_num");
			save_path_num = sav_pat_num.c_str();
		}
		if (cfg.keyExists("save_path_ori") == true) { // get original stream file name & path
			sav_pat_ori = cfg.getValueOfKey<string>("save_path_ori");
			save_path_ori = sav_pat_ori.c_str();
		}
		if (cfg.keyExists("height_roi") == true && cfg.keyExists("width_roi") == true) { // get heigth & width ROI
			int ROI_heigth = cfg.getValueOfKey<int>("height_roi");
			int ROI_width = cfg.getValueOfKey<int>("width_roi");
			ROI_dimensions = Size(ROI_width, ROI_heigth);
		}
		if (cfg.keyExists("ROI_start_x") == true && cfg.keyExists("ROI_start_y") == true) { // get x and y starting point for ROI
			ROI_start_y = cfg.getValueOfKey<int>("ROI_start_y");
			ROI_start_x = cfg.getValueOfKey<int>("ROI_start_x");
			ROI_start = Size(ROI_start_x, ROI_start_y);
			ROI_start_auto = 0;
		}
		if (cfg.keyExists("width_SE") == true && cfg.keyExists("heigth_SE") == true) { // get dimensions SE
			width_SE = cfg.getValueOfKey<int>("width_SE");
			heigth_SE = cfg.getValueOfKey<int>("heigth_SE");
			SE_morph = Size(width_SE, heigth_SE);
		}
		if (cfg.keyExists("heigth_blur") == true && cfg.keyExists("width_blur") == true) { // get dimensions Gaussian blur
			heigth_blur = cfg.getValueOfKey<int>("heigth_blur");
			width_blur = cfg.getValueOfKey<int>("width_blur");
			blur_dimensions = Size(width_blur, heigth_blur);
		}
		if (cfg.keyExists("thres_mode") == true) { // get threshold method
			thres_mode = cfg.getValueOfKey<int>("thres_mode");
			switch (thres_mode) {
			case 0:
				thres_type = THRESH_BINARY;
				thres_name = "THRESH_BINARY";
				break;
			case 1:
				thres_type = THRESH_BINARY_INV;
				thres_name = "THRESH_BINARY_INV";
				break;
			case 2:
				thres_type = THRESH_TRUNC;
				thres_name = "THRESH_TRUNC";
				break;
			case 3:
				thres_type = THRESH_TOZERO;
				thres_name = "THRESH_TOZERO";
				break;
			case 4:
				thres_type = THRESH_TOZERO_INV;
				thres_name = "THRESH_TOZERO_INV";
				break;
			default:
				thres_type = THRESH_BINARY;
				thres_name = "THRESH_BINARY";
			}
		}
		if (cfg.keyExists("itterations_close") == true) { // get number of itterations for closing operation
			itterations_close = cfg.getValueOfKey<int>("itterations_close");
		}
		if (cfg.keyExists("pupil_aspect_ratio") == true) { // get aspect ratio threshold accepted ellipse
			pupil_aspect_ratio = cfg.getValueOfKey<double>("pupil_aspect_ratio");
		}
		if (cfg.keyExists("pupil_min") == true) {  // get minimal accepted pupil radius
			pupil_min = cfg.getValueOfKey<int>("pupil_min");
		}
		if (cfg.keyExists("pupil_max") == true) {  // get maximal accepted pupil radius
			pupil_max = cfg.getValueOfKey<int>("pupil_max");
		}
		if (cfg.keyExists("original_image") == true) { // info: stream original stream to display
			original_image = cfg.getValueOfKey<bool>("original_image");
		}
		if (cfg.keyExists("blurred_image") == true) { // info: stream blurred stream to display
			blurred_image = cfg.getValueOfKey<bool>("blurred_image");
		}
		if (cfg.keyExists("thresholded_image") == true) { // info: thresholded_image blurred stream to display
			thresholded_image = cfg.getValueOfKey<bool>("thresholded_image");
		}
		if (cfg.keyExists("closed_image") == true) { // info: closed_image blurred stream to display
			closed_image = cfg.getValueOfKey<bool>("closed_image");
		}
		if (cfg.keyExists("end_result_image") == true) { // info: end_result_image blurred stream to display
			end_result_image = cfg.getValueOfKey<bool>("end_result_image");
		}
		if (cfg.keyExists("show_ost") == true) {	// put text on screen info
			show_ost = cfg.getValueOfKey<bool>("show_ost");
		}
		if (cfg.keyExists("size_text") == true) { // get text size for on screen text
			size_text = cfg.getValueOfKey<double>("size_text");
		}


		if (cfg.keyExists("threshold") == true) { // get threshold value
			main_pre_threshold = cfg.getValueOfKey<int>("threshold");
		}


		// BETA 31-5-2016, 3-6-2016
		if (cfg.keyExists("pre_threshold") == true) { // get pre threshold value
			pre_threshold = cfg.getValueOfKey<int>("pre_threshold");
		}
		if (cfg.keyExists("pre_threshold_image") == true) { // info: pre_threshold_image stream to display
			pre_threshold_image = cfg.getValueOfKey<bool>("pre_threshold_image");
		}

		// Beta 31-5-2016
		if (cfg.keyExists("crosshair") == true) { // 
			crosshair = cfg.getValueOfKey<bool>("crosshair");
		}

		// Beta 1-6-2016
		if (cfg.keyExists("calibrate") == true) { // 
			calibrate = cfg.getValueOfKey<bool>("calibrate");
		}

		if (cfg.keyExists("cali_x_a") == true && cfg.keyExists("cali_x_b") == true &&
			cfg.keyExists("cali_y_a") == true && cfg.keyExists("cali_y_b") == true) { // 
			cali_x_a = cfg.getValueOfKey<int>("cali_x_a");
			cali_x_b = cfg.getValueOfKey<int>("cali_x_b");
			cali_y_a = cfg.getValueOfKey<int>("cali_y_a");
			cali_y_b = cfg.getValueOfKey<int>("cali_y_b");
		}



		// BETA 14-6-2016
		if (cfg.keyExists("save_path_xy") == true) { // get numerical output file name & path
			save_path_xy = cfg.getValueOfKey<string>("save_path_xy");
			//save_path_num = sav_pat_num.c_str();
		}


		cout << endl << endl << " *** Configuration file loaded ***" << endl;

	}
	else {
		cout << endl << endl << " *** No configuration file found ***" << endl;
		cout << " *** Default, internal parameters loaded ***" << endl;
	}


	//------------------------//
	// Handle input arguments //
	//------------------------//

	cout << endl << endl << "Program has " << (argc - 1) << " extra input arguments:" << endl;
	for (int i = 1; i < argc; ++i) cout << argv[i] << endl;

	//------------------------//
	//		CMD - parser	  //
	//------------------------//

	// input: none
	if (argc <= 1)	// actual count (starts at 1)
	{
		// disable saving both numerical as well as video output.
		save_video = false;
		//save_video = false;
		save_radius = false;
		// amount of frames to grab
		frames = 120 * cFramesPerSecond;
		cout << endl << endl << " *** Calibration mode *** " << endl << endl;
		cout << " - No recording of video or numerical output" << endl;
		cout << " - 120 seconds of video stream" << endl << endl;
		cout << " - Hit [ESC] in video window to quit the program" << endl;
	}
	// input: [time]
	else if (argc == 2)
	{
		if (isalpha(*argv[1])) {	// index starts at 0
			puts("Not a number: Wrong input argument for [time] ?");
		}
		else if (isdigit(*argv[1])) {
			// atoi = Ascii To Int -> stops converting at the first non int
			time = atoi(argv[1]);
			// amount of frames to grab
			frames = time * cFramesPerSecond;
			cout << endl << "Recording time (sec(s))                      : " << time << endl;
			cout << "Total frames recorded                        : " << frames << endl;
			cout << "No additional savepath and name entered for numeric output" << endl;
			cout << "No additional savepath and name entered for video output." << endl;

		}
		else {
			puts("Not a number: Wrong input argument for [time] ?");
			return 1;
		}
	}
	// input: [time] [save num]
	else if (argc == 3)
	{
		if (isalpha(*argv[1]) || isdigit(*argv[2])) {	// index starts at 0
			puts("Not a number: Wrong input argument for [time] or [save num] ?");
		}
		else if (isdigit(*argv[1]) && isalpha(*argv[2])) {
			// atoi = Ascii To Int -> stops converting at the first non int
			time = atoi(argv[1]);
			// amount of frames to grab
			frames = time * cFramesPerSecond;
			// get entered save path and name for numerical output
			save_path_num = argv[2];

			cout << endl << "Recording time (sec(s))                      : " << time << endl;
			cout << "Total frames recorded                        : " << frames << endl;
			cout << "Entered additional savepath and name for video output : " << save_path_num << endl;
			cout << "No additional savepath and name entered for video output." << endl;

		}

		else {
			puts("Not a number: Wrong input argument for [time] or [save num] ?");
			return 1;
		}
	}
	// input: [time] [save num] [save xy]  
	else if (argc == 4) {


		// atoi = Ascii To Int -> stops converting at the first non int
		time = atoi(argv[1]);
		// amount of frames to grab
		frames = time * cFramesPerSecond;
		// get entered save path and name for pupil area output
		save_path_num = argv[2];
		// get entered save path and name for xy position pupil output
		save_path_xy = argv[3];

		cout << endl << "Recording time (sec(s))                      : " << time << endl;
		cout << "Total frames recorded                        : " << frames << endl;
		cout << "Entered additional savepath and name for pupil area output : " << save_path_num << endl;
		cout << "Entered additional savepath and name for xy position pupil : " << save_path_xy << endl;
	}
	// input: [time] [save num] [save xy] [save vid]
	else if (argc == 5)
	{

		// atoi = Ascii To Int -> stops converting at the first non int
		time = atoi(argv[1]);
		// amount of frames to grab
		frames = time * cFramesPerSecond;
		// get entered save path and name for numerical output
		save_path_num = argv[2];
		// get entered save path and name for xy position pupil output
		save_path_xy = argv[3];
		// get entered save path and name for video output
		save_path = argv[4];

		cout << endl << "Recording time (sec(s))                      : " << time << endl;
		cout << "Total frames recorded                        : " << frames << endl;
		cout << "Entered additional savepath and name for pupil area output : " << save_path_num << endl;
		cout << "Entered additional savepath and name for xy position pupil : " << save_path_xy << endl;
		cout << "Entered additional savepath and name for video output      : " << save_path << endl;

	}
	// to many input arguments
	else
	{
		cout << endl << " *** To many input arguments *** " << endl;
		return 1;
	}


	//------------------------------------//
	// Read values from default.ini file  //
	//------------------------------------//

	if (ini.is_open()) {

		main_pre_threshold = atoi(def_mainthres.c_str());
		pre_threshold = atoi(def_prethres.c_str());
		itterations_close = atoi(def_itterations.c_str());
		pupil_min = atoi(def_pupil_min.c_str());
		pupil_max = atoi(def_pupil_max.c_str());
		ROI_dimensions.width = atoi(def_roiwidth.c_str());
		ROI_dimensions.height = atoi(def_roiheigth.c_str());

	}

	//-----------------------//
	// Show loaded variables //
	//-----------------------//

	if (show_screen_info == true) {

		cout << endl << endl;
		cout << "*------------------------------------------------------*" << endl;
		cout << "*****               Program Parameters             *****" << endl;
		cout << "*------------------------------------------------------*" << endl;
		cout << "*" << endl;
		cout << "* Show Crosshair to aim camera        : " << crosshair << endl;
		cout << "* Save video output                   : " << save_video << endl;
		cout << "* Save original stream                : " << save_original << endl;
		cout << "* Save radius numerical output        : " << save_radius << endl;
		cout << "* Save path video output              : " << save_path << endl;
		cout << "* Save path original stream           : " << save_path_ori << endl;
		cout << "* Save path pupil area output         : " << save_path_num << endl;
		cout << "* Save path xy position output        : " << save_path_xy << endl;
		cout << endl;
		cout << "* Frames per second                   : " << cFramesPerSecond << endl;
		cout << "* Heigth and width ROI                : " << ROI_dimensions << endl;
		if (ROI_start_auto == false) {
			cout << "* Anchor coordinate [X,Y] ROI \n  manually set                        : " << ROI_start << endl;
		}
		else { cout << "* Anchor coordinate [X,Y] ROI set automatically" << endl; }
		cout << endl;
		cout << "* Value of threshold                  : " << main_pre_threshold << endl;
		cout << "* Threshold mode                      : (" << thres_mode << ") " << thres_name << endl;
		cout << "* pre-threshold value                 : " << pre_threshold << endl;
		cout << "* Size Gaussian blur filter           : " << blur_dimensions << endl;
		cout << "* Size structuring element \n  for morphological closing           : " << SE_morph << endl;
		cout << "* Total itterations closing operation : " << itterations_close << endl;
		cout << "* Threshold aspect ratio ellipse      : " << pupil_aspect_ratio << endl;
		cout << "* Minimum radius accepted ellipse     : " << pupil_min << endl;
		cout << "* Maximum radius accepted ellipse     : " << pupil_max << endl;
		cout << endl;
		cout << "* Show original stream on display     : " << original_image << endl;
		cout << "* Show blurred stream on display      : " << blurred_image << endl;
		cout << "* Show pre-threshold stream on display: " << pre_threshold_image << endl;
		cout << "* Show thresholded stream on display  : " << thresholded_image << endl;
		cout << "* Show morph closed stream on display : " << closed_image << endl;
		cout << "* Show end result stream on display   : " << end_result_image << endl;
		cout << endl;
		cout << "* Show text on end result stream      : " << show_ost << endl;
		cout << "* Size text on screen                 : " << size_text << endl;
		cout << "*" << endl;
		cout << "*------------------------------------------------------*" << endl;
		cout << "*******   Program by S.E Lansbergen, July 2016  ******** " << endl;
		cout << "*------------------------------------------------------*" << endl;

	}


	// set variables for on screen text output
	if (show_ost == true) {
		// text with save path & name
		ost3 << save_path;
		output_file = ost3.str();
	}
	if (crosshair == true) {
		// text for ROI size
		ost1 << "ROI size: " << ROI_dimensions.width << "x" << ROI_dimensions.height;
		size_roi = ost1.str();
	}

	//--------------------------------//
	// Video acquisition and analysis //
	//--------------------------------//

	// Before using any pylon methods, the pylon runtime must be initialized. 
	PylonInitialize();

	try
	{
		// Create an instant camera object with the camera device found first.
		//CInstantCamera camera(CTlFactory::GetInstance().CreateFirstDevice());

		CBaslerUsbInstantCamera camera(CTlFactory::GetInstance().CreateFirstDevice());

		// Print the model name of the camera.
		cout << endl << endl << "Connected Basler USB 3.0 device, type : " << camera.GetDeviceInfo().GetModelName() << endl;

		// open camera object to parse frame# etc.
		camera.Open();

		// Enable the acquisition frame rate parameter and set the frame rate.
		camera.AcquisitionFrameRateEnable.SetValue(true);
		camera.AcquisitionFrameRate.SetValue(cFramesPerSecond);

		// Get native width and height from connected camera
		GenApi::CIntegerPtr width(camera.GetNodeMap().GetNode("Width"));
		GenApi::CIntegerPtr height(camera.GetNodeMap().GetNode("Height"));

		// The parameter MaxNumBuffer can be used to control the count of buffers
		// allocated for grabbing. The default value of this parameter is 10.
		camera.MaxNumBuffer = 5;

		// Start the grabbing of c_countOfImagesToGrab images.
		// The camera device is parameterized with a default configuration which
		// sets up free-running continuous acquisition.
		camera.StartGrabbing(frames);

		// convers pylon video stream into CPylonImage object
		// which will be used to construct Mat objects
		CPylonImage image;
		CImageFormatConverter fc;
		// define pixel output format (to match algorithm optimalization).
		fc.OutputPixelFormat = PixelType_Mono8;

		// This smart pointer will receive the grab result data. (Pylon).
		CGrabResultPtr ptrGrabResult;

		// create Mat image template
		Mat cv_img(width->GetValue(), height->GetValue(), CV_8UC3);

		// set contours variable
		vector<vector<Point> > contours;

		// automatically calculate start point of ROI
		if (ROI_start_auto == true) {
			Size size(width->GetValue(), height->GetValue());
			ROI_start_x = (size.width / 2) - (ROI_dimensions.width / 2);
			ROI_start_y = (size.height / 2) - (ROI_dimensions.height / 2);

			// get values from default.ini
			if (ini.is_open()) {
				ROI_start_x = atoi(def_roistartx.c_str());
				ROI_start_y = atoi(def_roistarty.c_str());
			}
		}

		// set ROI
		Rect roi(ROI_start_x, ROI_start_y, ROI_dimensions.width, ROI_dimensions.height);

		// set Structuring Element
		Mat SE = getStructuringElement(MORPH_ELLIPSE, SE_morph, Point(-1, -1));


		//--------------------------------//
		// Open avi and txt output stream //
		//--------------------------------//

		// open video writer object: End Result
		if (save_video == true) {

			// create video output End Result object -> MPEG encoding
			roi_end_result.open(save_path, CV_FOURCC('M', 'P', 'E', 'G'), cFramesPerSecond, Size(width->GetValue(), height->GetValue()), true);

			//if the VideoWriter file is not initialized successfully, exit the program.
			if (!roi_end_result.isOpened())
			{
				cout << "ERROR: Failed to write the video" << endl;
				return -1;
			}
		}

		// open video writer object: Original
		if (save_original == true) {

			// create video output Original object -> MPEG encoding
			original.open(save_path_ori, CV_FOURCC('M', 'P', 'E', 'G'), cFramesPerSecond, Size(width->GetValue(), height->GetValue()), true);

			//if the VideoWriter file is not initialized successfully, exit the program.
			if (!original.isOpened())
			{
				cout << "ERROR: Failed to write the video" << endl;
				return -1;
			}
		}

		// open outstream to write end result (radius)
		if (save_radius == true) {
			output_end_result.open(save_path_num);
			output_xy.open(save_path_xy);
		}

		// set parameters for calibration tool
		Size size_cam(width->GetValue(), height->GetValue());
		Point calibrate_stripe1a(cali_x_a, cali_y_a);
		Point calibrate_stripe1b(cali_x_a, cali_y_b);
		Point calibrate_stripe2a(cali_x_b, cali_y_a);
		Point calibrate_stripe2b(cali_x_b, cali_y_b);


		//---------------------//
		// Main Algorithm Loop //
		//---------------------//

		// initiate main loop with algorithm
		while (camera.IsGrabbing())
		{
			// Wait for an image and then retrieve it. A timeout of 5000 ms is used.
			camera.RetrieveResult(5000, ptrGrabResult, TimeoutHandling_ThrowException);

			// Image grabbed successfully?
			if (ptrGrabResult->GrabSucceeded())
			{

				// Pre-Step: set (click on-)mouse call back function
				setMouseCallback("End Result", onMouse, 0);

				// Step 1
				//
				// convert to Mat - openCV format for analysis
				fc.Convert(image, ptrGrabResult);
				cv_img = Mat(ptrGrabResult->GetHeight(), ptrGrabResult->GetWidth(), CV_8U, (uint8_t*)image.GetBuffer());

				// (Step 1b)
				//
				// crosshair output
				if (crosshair == true) {
					cvtColor(cv_img, aim, CV_GRAY2RGB);
					line(aim, Point((size_cam.width / 2 - 25), size_cam.height / 2), Point((size_cam.width / 2 + 25), size_cam.height / 2), Scalar(0, 255, 0), 2, 8);
					line(aim, Point(size_cam.width / 2, (size_cam.height / 2 - 25)), Point(size_cam.width / 2, (size_cam.height / 2 + 25)), Scalar(0, 255, 0), 2, 8);
					rectangle(aim, roi, Scalar(0, 255, 0), 2, 8);
					putText(aim, size_roi, cvPoint(30, 20),
						FONT_HERSHEY_COMPLEX_SMALL, (0.8), cvScalar(0, 255, 0), 1, CV_AA);
					imshow("Crosshair", aim);
				}

				// (Step 1c)
				//
				// extra calibration step output
				if (calibrate == true) {
					cvtColor(cv_img, cali, CV_GRAY2RGB);
					line(cali, calibrate_stripe1a, calibrate_stripe1b, Scalar(255, 0, 0), 4, 8);
					line(cali, calibrate_stripe2a, calibrate_stripe2b, Scalar(255, 0, 0), 4, 8);
					putText(cali, "Calibrate", cvPoint(30, 20),
						FONT_HERSHEY_COMPLEX_SMALL, (0.8), cvScalar(255, 0, 0), 1, CV_AA);
					imshow("calibrate", cali);
				}

				// Step 2
				//
				// take ROI from eye original
				eye = cv_img;
				roi_eye = eye(roi);
				// make RGB copy of ROI for end result
				cvtColor(eye, end_result, CV_GRAY2RGB);
				// Set user ROI from mouse input
				if (roi_user.width != 0) {
					if (0 <= roi_user.x && 0 <= roi_user.width && roi_user.x + roi_user.width <= eye.cols && roi_user.y + roi_user.height <= eye.rows) {
						roi = roi_user;
					}
				}
				if (original_image == true) { imshow("Original", eye); }

				// Step 3
				//
				// apply Gaussian blur to ROI
				GaussianBlur(roi_eye, blur, blur_dimensions, 0, 0, BORDER_DEFAULT);
				if (blurred_image == true) { imshow("Gaussian blur", blur); }

				// Step 4
				//
				// Pre-Threshold: Convert to binary image by thresholding it
				threshold(blur, pre_thres, pre_threshold, 255, THRESH_TOZERO_INV);
				if (pre_threshold_image == true) {
					imshow("Pre-thresholded", pre_thres);
					// set trackbar on end-result output
					createTrackbar("Pre Threshold:", "End Result", &pre_threshold, 255);
				}

				// Step 5
				//
				// Main-Threshold: Convert to binary image by thresholding it

				threshold(pre_thres, thres, main_pre_threshold, 255, thres_type);
				if (thresholded_image == true) {
					imshow("Thresholded", thres);
					// set trackbar on end-result output
					createTrackbar(" Threshold:", "End Result", &main_pre_threshold, 255);
				}

				// Step 6
				//
				// Morphological closing (erosion and dilation)
				morphologyEx(thres, close, MORPH_CLOSE, SE, Point(-1, -1), itterations_close);
				if (closed_image == true) {
					imshow("Morphological closing", close);
					// set trackbar on end-result output
					createTrackbar(" Itterations:", "End Result", &itterations_close, 15);
				}

				// Step 7
				//
				// find contour algorithm
				findContours(close, contours, RETR_LIST, CHAIN_APPROX_NONE);

				// Step 8
				// 
				// Fit ellipse and draw on image
				double ellipse_width(0), ellipse_height(0);
				int flag(0), area_output;
				Point ellipse_shift(0, 0);
				int x_out(0), y_out(0);

				// Loop to draw circle on video image
				for (int i = 0; i < contours.size(); i++)
				{

					size_t count = contours[i].size();
					if (count < 6)
						continue;

					Mat pointsf;
					Mat(contours[i]).convertTo(pointsf, CV_32F);
					RotatedRect box = fitEllipse(pointsf);

					if (MAX(box.size.width, box.size.height) > MIN(box.size.width, box.size.height) * pupil_aspect_ratio)
						continue;

					// sets min and max width and heigth of the box in which the ellipse is fitted
					// only these are used in the video and numerical output
					if (MAX(box.size.width, box.size.height) > pupil_min && MAX(box.size.width, box.size.height) < pupil_max) {

						flag++;  // counts 1 at first itteration

								 // adds all width and height in all itterations for pupil area
						ellipse_width = ellipse_width + box.size.width;
						ellipse_height = ellipse_height + box.size.height;

						// Plot on ROI screen, and add shift x-y by ROI
						ellipse_shift.x = box.center.x + roi.x;
						ellipse_shift.y = box.center.y + roi.y;
						ellipse(end_result, ellipse_shift, box.size*0.5f, box.angle, 0, 360, Scalar(0, 0, 255), 2, LINE_AA);

						// adds all width and height in all itterations for pupil x-y position
						x_out = x_out + ellipse_shift.x;
						y_out = y_out + ellipse_shift.y;

					}
				}

				// draw cross in center of pupil
				line(end_result, Point(ellipse_shift.x - 3, ellipse_shift.y),
					Point(ellipse_shift.x + 3, ellipse_shift.y), Scalar(0, 255, 0), 2, 8);
				line(end_result, Point(ellipse_shift.x, ellipse_shift.y - 3),
					Point(ellipse_shift.x, ellipse_shift.y + 3), Scalar(0, 255, 0), 2, 8);



				// devides width and heigth with total number of found ellipses to get average value
				//
				if (ellipse_width != NAN && ellipse_height != NAN
					&& ellipse_width != 0 && ellipse_height != 0) {
					ellipse_width = ellipse_width / flag;
					ellipse_height = ellipse_height / flag;

					// calculate total area of ellipse
					area_output = (ellipse_width / 2) * (ellipse_height / 2) * pi;

					// set x-y position
					x_out = x_out / flag;
					y_out = y_out / flag;

				}
				else {
					// set area to 0 when no ellipse is found
					area_output = 0;
					x_out = 0;
					y_out = 0;
				}


				// put streamstring to video frame
				if (show_ost == true) {
					putText(end_result, output_file, cvPoint(30, 20),
						FONT_HERSHEY_COMPLEX_SMALL, (size_text), cvScalar(0, 0, 255), 1, CV_AA);
				}

				// SHOW END RESULT
				//
				// set trackbar on end-result output
				imshow("End Result", end_result);
				createTrackbar("size min:", "End Result", &pupil_min, 75);
				createTrackbar("size max:", "End Result", &pupil_max, 150);

				//------------------------------//
				// Store radius & video streams //
				//------------------------------//

				// store radius in output file
				if (save_radius == true) {
					output_end_result << area_output << endl;
					output_xy << x_out << char(44) << char(32) << y_out << endl;
				}

				// write the end result into file
				if (save_video == true) {
					roi_end_result.write(end_result);
				}
				// write the original stream into file
				if (save_original == true) {
					// conversion of Mat file is necassery prior to saving with mpeg compression
					cvtColor(eye, eye, CV_GRAY2RGB);
					original.write(eye);
				}

				// close grabbing when escape-key "Esc" is used
				if (waitKey(30) == 27) {
					camera.StopGrabbing();
				}

			}

			else
			{
				cout << "Error: " << ptrGrabResult->GetErrorCode() << " " << ptrGrabResult->GetErrorDescription() << endl;
			}
		} // end algorithm main loop


		  // close numerical output streams
		if (save_radius == true) {
			output_end_result.close();
			output_xy.close();
		}

		//------------------------------------//
		// Write values from default.ini file //
		//------------------------------------//

		if (ini.is_open()) {

			// set default threshold values
			ini.property("thresholding", "pre-threshold") = to_string(pre_threshold);
			ini.property("thresholding", "main-threshold") = to_string(main_pre_threshold);

			// set default ROI values
			ini.property("ROI", "width") = to_string(roi.width);
			ini.property("ROI", "height") = to_string(roi.height);
			ini.property("ROI", "startx") = to_string(roi.x);
			ini.property("ROI", "starty") = to_string(roi.y);

			// get default closing itteration value
			ini.property("close", "itterations") = to_string(itterations_close);

			// get default min and max pupil size values
			ini.property("pupil_size", "pupil_max") = to_string(pupil_max);
			ini.property("pupil_size", "pupil_min") = to_string(pupil_min);


			cout << endl << endl << " *** default.ini stored ***" << endl;

		}
	}

	catch (const GenericException &e)
	{
		// Error handling.
		cerr << "An exception occurred." << endl
			<< e.GetDescription() << endl;
		exitCode = 1;
	}

	// Releases all pylon resources. 
	PylonTerminate();

	// end on terminal screen
	if (save_radius == true || save_video == true) {
		cout << endl << endl << " *** Done recording ***" << endl << endl;
	}
	else {
		cout << endl << endl << " *** Done ***" << endl << endl;
	}

	return exitCode;
}
コード例 #9
0
	void CCameraBasler::continuousAcquireHardwareTrigger(int index)
	{
		IplImage *img;
		CGrabResultPtr ptrGrabResult;
		std::pair<char*,IplImage*> pairTemp;
		unsigned int indiceImagenes = 0;

		std::ofstream myfile;
		std::string gpsFileName= folderName;
		gpsFileName.append("\\gps.txt");
		myfile.open (gpsFileName.c_str());
		
		
		while (m_cameraState == CVCCameraInterface::GRABBING)
		{
			try
			{
#ifdef DEBUG_PERFORMANCE
				Timer timer;
				Timer timer2;
				timer2.start();
#endif
				m_Camera->RetrieveResult(INFINITE, ptrGrabResult, TimeoutHandling_Return);
				if (ptrGrabResult->GrabSucceeded())
				{
					// Convert pylon image to opencv image format
					img = cvCreateImage(cvSize(ptrGrabResult->GetWidth(),ptrGrabResult->GetHeight()),8,3);

#ifdef DEBUG_PERFORMANCE
					timer.start();
#endif
					CBaslerFormatConverter::convertCOLORtoCVRGB(img,ptrGrabResult);
#ifdef DEBUG_PERFORMANCE					
					timer.stop();
					std::cout << "[DEBUG BASLER] "<< timer.getElapsedTimeInMilliSec() << " ms In convert from Basler to Opencv\n";
#endif

#ifdef DEBUG_SHOWSNAPS	
					cvShowImage("Visible",img);
					cvWaitKey(1);
#endif

					// Construct image file name
					char *str = new char[200];
					std::string isoString = boost::posix_time::to_iso_string(boost::posix_time::microsec_clock::universal_time());
					std::string date = isoString.substr(0,8);
				    std::string time = isoString.substr(9,20); 
			
					myfile <<  date << "T,"<< time<<"Z,"<<CVCCameraInterface::GPSInfo::Instance()->gpsInfo;

					sprintf(str,"%s\\Visible_%d.bmp",folderName.c_str(),indiceImagenes);
					// Put name and image in a pair
					pairTemp.first = str;
					pairTemp.second = img;
					// Enqueue pair of <nameOfFileToSave,image> in the SaveImageProcess 
					// Is a singleton thread save design to enqueue and process all images.
					// Index refers to the "id" of the queue. Each queue will have a thread.
					

					CVCCameraInterface::SaveImagesProcess::Instance()->Add(index,pairTemp);

					
					// Increment the number of the actual image. Used to make the filename
					indiceImagenes++;
#ifdef DEBUG_PERFORMANCE					
					std::cout << "[DEBUG BASLER] "<< indiceImagenes  << " imagenes tomadas"<<std::endl;
					std::cout << "[DEBUG BASLER] "<< timer2.getElapsedTimeInMilliSec()  << " Duro el ciclo if"<<std::endl;
#endif
				}
				else
				{
					std::cout << "Error: [Basler] :" << ptrGrabResult->GetErrorCode() << " " << ptrGrabResult->GetErrorDescription() << std::endl;
				}
			}
			catch(GenICam::GenericException &e)
			{
				std::cerr << "ERROR: [Basler] Acquiring continuous images." << e.GetDescription() << std::endl;
			}
			
		}

		myfile.close();
		try
		{
			m_Camera->StopGrabbing();
		}
		catch(GenICam::GenericException &e)
		{
			std::cerr << "ERROR: [Basler] Acquiring continuous images." << e.GetDescription() << std::endl;
		}
	}	
コード例 #10
0
	IplImage * CCameraBasler::AcquireSingleImage()
	{
		CGrabResultPtr ptrGrabResult;
		IplImage *img = NULL;

		try
		{
			if (m_Camera == NULL)
			{
				std::cerr << "ERROR: [Basler] Camera is null." << std::endl;
				return NULL;
			}
			// Camera have to be configured in free running
			if ( m_cameraState == CVCCameraInterface::CONFIGURED )
			{
				// Camera have to be configured in trigger software mode. If is in custom mode it's ok, otherwise will force
				// default trigger software configuration.
				if ( m_cameraStateMode != CVCCameraInterface::CUSTOM )
				{
					if ( m_cameraStateMode != CVCCameraInterface::TRIGGER_SOFTWARE )
					{
						configureCameraMode(CVCCameraInterface::TRIGGER_SOFTWARE);
					}
				}
			}
			// Configure strategy one by one
			m_Camera->StartGrabbing( GrabStrategy_OneByOne);
			// Wait camera to be ready for a software trigger
			if (m_Camera->WaitForFrameTriggerReady( 200,TimeoutHandling_ThrowException))
			{
				// Execute software trigger
				m_Camera->ExecuteSoftwareTrigger();
			}
			// Wait some time to acquire the image
			::Sleep(200);
			// Grab the image from the pylon buffer
			m_Camera->RetrieveResult(5000,ptrGrabResult,TimeoutHandling_Return);
			// If is not grabbed succesfull
			if (!ptrGrabResult->GrabSucceeded())
			{
				 return NULL;
			}
			// Stop camera grabbing
			m_Camera->StopGrabbing();
		}
		catch(GenICam::GenericException &e)
		{
			std::cerr << "Error: [Basler] An exception occurred acquiring single image." << std::endl << e.GetDescription() << std::endl;
			return NULL;
		}
		try
		{
			// Convert pylon image to opencv image format
			img = cvCreateImage(cvSize(ptrGrabResult->GetWidth(),ptrGrabResult->GetHeight()),8,3);
			CBaslerFormatConverter::convertCOLORtoCVRGB(img,ptrGrabResult);
		}
		catch(...)
		{
			return NULL;
		}
		// Return the image in opencv format
		return img;
	}
コード例 #11
0
ファイル: grabpylon.cpp プロジェクト: Strongc/gigecamera
int main(int argc, char* argv[])
{
    // The exit code of the sample application.
    int exitCode = 0;

    if(const char* env_p = std::getenv("PATH"))
      std::cout << "Your PATH is: " << env_p << '\n';

    // Automagically call PylonInitialize and PylonTerminate to ensure the pylon runtime system
    // is initialized during the lifetime of this object.
    Pylon::PylonAutoInitTerm autoInitTerm;

    try
    {
        // Create an instant camera object with the camera device found first.
        CInstantCamera camera( CTlFactory::GetInstance().CreateFirstDevice());
        // Print the model name of the camera.
        cout << "Using device " << camera.GetDeviceInfo().GetModelName() << endl;

        INodeMap& nodemap = camera.GetNodeMap();

        // Open the camera for accessing the parameters.
        camera.Open();

        // Get camera device information.
        cout << "Camera Device Information" << endl
             << "=========================" << endl;
        cout << "Vendor           : "
             << CStringPtr( nodemap.GetNode( "DeviceVendorName") )->GetValue() << endl;
        cout << "Model            : "
             << CStringPtr( nodemap.GetNode( "DeviceModelName") )->GetValue() << endl;
        cout << "Firmware version : "
             << CStringPtr( nodemap.GetNode( "DeviceFirmwareVersion") )->GetValue() << endl << endl;

        // Camera settings.
        cout << "Camera Device Settings" << endl
             << "======================" << endl;



        // Set the AOI:

        // Get the integer nodes describing the AOI.
        CIntegerPtr offsetX( nodemap.GetNode( "OffsetX"));
        CIntegerPtr offsetY( nodemap.GetNode( "OffsetY"));
        CIntegerPtr width( nodemap.GetNode( "Width"));
        CIntegerPtr height( nodemap.GetNode( "Height"));


        // Access the PixelFormat enumeration type node.
        CEnumerationPtr pixelFormat( nodemap.GetNode( "PixelFormat"));

        // Remember the current pixel format.
        String_t oldPixelFormat = pixelFormat->ToString();
        cout << "Old PixelFormat  : " << oldPixelFormat << endl;

        // Set the pixel format to Mono8 if available.
        if ( IsAvailable( pixelFormat->GetEntryByName( "Mono8")))
        {
            pixelFormat->FromString( "Mono8");
            cout << "New PixelFormat  : " << pixelFormat->ToString() << endl;
        }
        


        // The parameter MaxNumBuffer can be used to control the count of buffers
        // allocated for grabbing. The default value of this parameter is 10.
        camera.MaxNumBuffer = 20;
        // Start the grabbing of c_countOfImagesToGrab images.
        // The camera device is parameterized with a default configuration which
        // sets up free-running continuous acquisition.
        camera.StartGrabbing( c_countOfImagesToGrab);
        // This smart pointer will receive the grab result data.
        CGrabResultPtr ptrGrabResult;

        // Camera.StopGrabbing() is called automatically by the RetrieveResult() method
        // when c_countOfImagesToGrab images have been retrieved.
        while ( camera.IsGrabbing())
        {
            // Wait for an image and then retrieve it. A timeout of 5000 ms is used.
            camera.RetrieveResult( 5000, ptrGrabResult, TimeoutHandling_ThrowException);

            // Image grabbed successfully?
            if (ptrGrabResult->GrabSucceeded())
            {
                // Access the image data.
                cout << "SizeX: " << ptrGrabResult->GetWidth() << endl;
                cout << "SizeY: " << ptrGrabResult->GetHeight() << endl;
                const uint8_t *pImageBuffer = (uint8_t *) ptrGrabResult->GetBuffer();
                cout << "Gray value of first pixel: " << (uint32_t) pImageBuffer[0] << endl << endl;

#ifdef PYLON_WIN_BUILD
                // Display the grabbed image.
                Pylon::DisplayImage(1, ptrGrabResult);
#endif
            }
            else
            {
                cout << "Error: " << ptrGrabResult->GetErrorCode() << " " << ptrGrabResult->GetErrorDescription() << endl;
            }
        }
    }
    catch (GenICam::GenericException &e)
    {
        // Error handling.
        cerr << "An exception occurred." << endl
        << e.GetDescription() << endl;
        exitCode = 1;
    }

    // Comment the following two lines to disable waiting on exit.
    cerr << endl << "Press Enter to exit." << endl;
    while( cin.get() != '\n');

    return exitCode;
}