コード例 #1
0
void CAddObexAttachmentAsEntryState::StartL(TRequestStatus& aStatus)
    {
    // Add an attachment as a child entry

    CBaseMtm& clientMtm = iClientTest.ObexTestUtils().GetCurrentObexClientMtm();

	CMsvEntry& entry = clientMtm.Entry();
	CMsvStore* store = entry.EditStoreL();
	CleanupStack::PushL(store);
	
	CAsyncWaiter* waiter = CAsyncWaiter::NewL();
	CleanupStack::PushL(waiter);
	CMsvAttachment* attachment = CMsvAttachment::NewL(CMsvAttachment::EMsvFile);
	CleanupStack::PushL(attachment);
	TParse fileNameParser;
	User::LeaveIfError(fileNameParser.Set(iFileName, NULL, NULL));
	attachment->SetAttachmentNameL(fileNameParser.NameAndExt());
	store->AttachmentManagerL().AddAttachmentL(iFileName, attachment, waiter->iStatus);
	CleanupStack::Pop(attachment);
	waiter->StartAndWait();
	User::LeaveIfError(waiter->Result());
	CleanupStack::PopAndDestroy(waiter);
	
	store->CommitL();
	CleanupStack::PopAndDestroy(store);

    TRequestStatus* status = &aStatus;
	User::RequestComplete(status, KErrNone);
    }
コード例 #2
0
// ---------------------------------------------------------
// 
// ---------------------------------------------------------
void CMmsAttachmentHandler::RemoveAttachmentL( TMsvAttachmentId aAttaId, CMsvStore& aStore )
    {
    MMsvAttachmentManager& attaMan = aStore.AttachmentManagerL();
    MMsvAttachmentManagerSync& attaManSync = aStore.AttachmentManagerExtensionsL();

    // can only remove synchronously if index is known.
    TInt count = attaMan.AttachmentCount();
    
    TInt i = count - 1;
    TBool found = EFalse;
    while ( i >= 0 && !found )
        {
        CMsvAttachment* attachmentInfo = attaMan.GetAttachmentInfoL( i );
        CleanupStack::PushL( attachmentInfo );
        if ( attachmentInfo->Id() == aAttaId )
            {
            found = ETrue;
            }
        else
            {
            i--;
            }
        CleanupStack::PopAndDestroy( attachmentInfo );    
        attachmentInfo = NULL;
        }
    if ( i >= 0 && found )
        {
        attaManSync.RemoveAttachmentL( i );
        }
    }
コード例 #3
0
void CMtfTestActionAddAttachmentAsLink::RunTestL()
	{
	CMsvStore* paramStore = ObtainParameterReferenceL<CMsvStore>(TestCase(),ActionParameters().Parameter(0));
	HBufC* paramFilePath   = ObtainParameterReferenceL<HBufC>(TestCase(),ActionParameters().Parameter(1));
	HBufC8* paramMimeType = ObtainParameterReferenceL<HBufC8>(TestCase(),ActionParameters().Parameter(2));
	
	
	CMtfAsyncWaiter* waiter = CMtfAsyncWaiter::NewL();
	CleanupStack::PushL(waiter);
	
	CMsvAttachment* attachment = CMsvAttachment::NewL(CMsvAttachment::EMsvLinkedFile);
	CleanupStack::PushL(attachment);
	
	attachment->SetMimeTypeL(*paramMimeType);
	
	TParse fileNameParser;
	User::LeaveIfError(fileNameParser.Set(*paramFilePath, NULL, NULL));
	attachment->SetAttachmentNameL(fileNameParser.NameAndExt());
	
	MMsvAttachmentManager& manager = paramStore->AttachmentManagerL();
	
	manager.AddLinkedAttachmentL(*paramFilePath, attachment, waiter->iStatus);
	CleanupStack::Pop(attachment); // ownership passed to manager

	waiter->StartAndWait();
	User::LeaveIfError(waiter->Result());
	CleanupStack::PopAndDestroy(waiter);
	
	TMsvAttachmentId attachmentId = attachment->Id();
	
	paramStore->CommitL();
	
	StoreParameterL<TMsvAttachmentId>(TestCase(),attachmentId,ActionParameters().Parameter(3));	
	}
コード例 #4
0
//---------------------------------------------------------------
// CNativeMmsUtility::getSmilFileL
// @see header
//---------------------------------------------------------------
const QString CNativeMmsUtility::getSmilFileL()
{
#ifdef _DEBUG_TRACES_
    qDebug() << " Enter CNativeMmsUtility::getSmilFileL";
#endif

    TUint count = iattachmanager->AttachmentCount();
    for (int i = 0; i < count; i++)
    {
        CMsvAttachment *attachment = iattachmanager->GetAttachmentInfoL(i);
        if (attachment->MimeType().CompareF(KMsgMimeSmil) == 0)
        {
#ifdef _DEBUG_TRACES_
            qDebug() << " Exit CNativeMmsUtility::getSmilFileL";
#endif

            return XQConversions::s60DescToQString(attachment->FilePath());
        }
    }

#ifdef _DEBUG_TRACES_
    qDebug() << " Exit CNativeMmsUtility::getSmilFileL";
#endif

    return QString();
}
// ----------------------------------------------------------------------------
// CIpsPlgNewChildPartFromFileOperation::InitAttachmentManagerL
// ----------------------------------------------------------------------------
//
void CIpsPlgNewChildPartFromFileOperation::InitAttachmentManagerL()
    {
    iEntry = NULL;
    iMessage = NULL;
    RFile file;
    TInt fileSize( 0 );

    // Read attachment size
    User::LeaveIfError(
        file.Open( iMsvSession.FileSession(), iFilePath->Des(), EFileShareReadersOnly )
        );
 
    //in rare case that file has disappeared while sending
    //we just won't get the size for it
    file.Size( fileSize );
    file.Close();    

    // Initialize CMsvAttachment instance for the attachment creation
    CMsvAttachment* info = CMsvAttachment::NewL( CMsvAttachment::EMsvFile );
    CleanupStack::PushL( info );

    info->SetAttachmentNameL( iFilePath->Des() );
    info->SetSize( fileSize );

    // Create/acquire Symbian message entry objects
    GetMessageEntryL( iMessageId.Id(), iEntry, iMessage );

    // Start attachment creation
    iMessage->AttachmentManager().AddAttachmentL( 
        iFilePath->Des(), info, iStatus );
    CleanupStack::Pop( info ); // attachment manager takes ownership
    iStep = EPrepareMsvEntry; // Next step
    SetActive();
    }
コード例 #6
0
//---------------------------------------------------------------
// CNativeMmsUtility::getBodyTextFromAttManL
// @see header
//---------------------------------------------------------------
void CNativeMmsUtility::getBodyTextFromAttManL(QString& returnbuf)
{
#ifdef _DEBUG_TRACES_
    qDebug() << " Enter CNativeMmsUtility::getBodyTextFromAttManL";
#endif

    TUint count = iattachmanager->AttachmentCount();
    for (int i = 0; i < count; i++)
    {
        CMsvAttachment *attachment = iattachmanager->GetAttachmentInfoL(i);
        TPtrC8 mimetype = attachment->MimeType();

        if (!isAttachment(attachment) && mimetype.CompareF(KMsgMimeTextPlain)
                == 0)
        {
            QString filepath =
                    XQConversions::s60DescToQString(attachment->FilePath());
            readFileIntoBuffer(filepath, returnbuf);
            break;
        }
    }

#ifdef _DEBUG_TRACES_
    qDebug() << " Exit CNativeMmsUtility::getBodyTextFromAttManL";
#endif

    return;
}
void CMtfTestActionSmtpAddLinkedAttachment::RunTestL()
	{
	CMsvSession* paramSession = ObtainParameterReferenceL<CMsvSession>(TestCase(),ActionParameters().Parameter(0));
	TMsvId messageEntry = ObtainValueParameterL<TMsvId>(TestCase(),ActionParameters().Parameter(1));
	HBufC* paramFilePath   = ObtainParameterReferenceL<HBufC>(TestCase(),ActionParameters().Parameter(2));
	HBufC8* paramMimeType = ObtainParameterReferenceL<HBufC8>(TestCase(),ActionParameters().Parameter(3));

	CMsvEntry* entry = paramSession->GetEntryL(messageEntry);
	CleanupStack::PushL(entry);
	
	CImEmailMessage* emailMsg = CImEmailMessage::NewL(*entry);
	CleanupStack::PushL(emailMsg);
	
	CMtfAsyncWaiter* waiter = CMtfAsyncWaiter::NewL();
	CleanupStack::PushL(waiter);
	
	CMsvAttachment* attachment = CMsvAttachment::NewL(CMsvAttachment::EMsvLinkedFile);
	CleanupStack::PushL(attachment);
	
	attachment->SetMimeTypeL(*paramMimeType);
	
	TParse fileNameParser;
	User::LeaveIfError(fileNameParser.Set(*paramFilePath, NULL, NULL));
	attachment->SetAttachmentNameL(fileNameParser.NameAndExt());
	
	TEntry fileEntry;
	User::LeaveIfError(paramSession->FileSession().Entry( fileNameParser.FullName(), fileEntry));
	attachment->SetSize(fileEntry.iSize);

	MMsvAttachmentManager& manager = emailMsg->AttachmentManager();
	
	manager.AddLinkedAttachmentL(*paramFilePath, attachment, waiter->iStatus);
	CleanupStack::Pop(attachment); // ownership passed to manager
	waiter->StartAndWait();
	User::LeaveIfError(waiter->Result());
	CleanupStack::PopAndDestroy(waiter);
	
	attachment = NULL;
	
	TInt attachmentCount = manager.AttachmentCount();
	attachment = manager.GetAttachmentInfoL(attachmentCount - 1);
	CleanupStack::PushL(attachment);
	
	TMsvAttachmentId attachmentId = attachment->Id();
	
	CleanupStack::PopAndDestroy(attachment);
	
	CleanupStack::PopAndDestroy(2, entry); // emailMsg, entry
	
	StoreParameterL<TMsvAttachmentId>(TestCase(),attachmentId,ActionParameters().Parameter(4));
	}
コード例 #8
0
ファイル: t_defect.cpp プロジェクト: cdaffara/symbiandump-mw2
LOCAL_C void TestReadOnlyDeletionL()
	{
	CDummyObserver* ob = new(ELeave)CDummyObserver;
	CleanupStack::PushL(ob);

	CMsvSession* session = CMsvSession::OpenSyncL(*ob);
	CleanupStack::PushL(session);

	CMsvEntry* cEntry = CMsvEntry::NewL(*session, KMsvDraftEntryId, TMsvSelectionOrdering());
	CleanupStack::PushL(cEntry);

	// Create an entry
	TMsvEntry entry;
	entry.iType = KUidMsvMessageEntry;
	entry.iMtm = KUidMsvLocalServiceMtm;
	entry.iServiceId = KMsvLocalServiceIndexEntryId;
	cEntry->CreateL(entry);

	// Generate name of attachment
	cEntry->SetEntryL(entry.Id());
	TFileName fileName;

	fileName.Append(_L("Test"));
	CMsvStore* store = cEntry->EditStoreL();
	CleanupStack::PushL(store);

	CAsyncWaiter* waiter = CAsyncWaiter::NewL();
	CleanupStack::PushL(waiter);
	CMsvAttachment* attachment = CMsvAttachment::NewL(CMsvAttachment::EMsvFile);
	CleanupStack::PushL(attachment);
	fileName.Append(_L("Test"));
	attachment->SetAttachmentNameL(fileName);
	RFile file;
	store->AttachmentManagerL().CreateAttachmentL(fileName, file, attachment, waiter->iStatus);
	CleanupStack::Pop(attachment); // ownership passed
	waiter->StartAndWait();
	User::LeaveIfError(waiter->Result());
	CleanupStack::PopAndDestroy(waiter);
	
	CleanupClosePushL(file);
	User::LeaveIfError(file.Write(_L8("some text")));
	User::LeaveIfError(file.SetAtt(KEntryAttReadOnly, KEntryAttNormal));
	CleanupStack::PopAndDestroy(2, store); // file, store

	// Now try and delete the file
	cEntry->SetEntryL(entry.Parent());
	cEntry->DeleteL(entry.Id());

	CleanupStack::PopAndDestroy(3); // cEntry, session, ob
	}
コード例 #9
0
TInt32 CSmtpClientMtm::GetAttachmentSizeL(CImEmailMessage& aMessage, TMsvId aMsvId)
	{
	// Calculate the total size of all attachments associated with this message
	TInt total=0;
	aMessage.GetAttachmentsListL(iWait->iStatus, aMsvId, CImEmailMessage::EAllAttachments,CImEmailMessage::EThisMessageOnly);
	iWait->Start();		// wait for the asynch operation to complete
	TInt numAttachments=aMessage.AttachmentManager().AttachmentCount();
	for (TInt n=0 ; n<numAttachments ; ++n)
		{
		CMsvAttachment* attachment = aMessage.AttachmentManager().GetAttachmentInfoL(n);
		total+=attachment->Size();
		delete attachment;
		}
	return total;
	}
コード例 #10
0
void CMtfTestActionRemoveAllAttachments::ExecuteActionL()
	{
	TestCase().INFO_PRINTF2(_L("Test Action %S start..."), &KTestActionRemoveAllAttachments);
	CMsvSession* paramSession = ObtainParameterReferenceL<CMsvSession>(TestCase(),ActionParameters().Parameter(0));
	TMsvId messageEntry = ObtainValueParameterL<TMsvId>(TestCase(),ActionParameters().Parameter(1));
	TInt attachIdFlag = ObtainValueParameterL<TInt>(TestCase(),ActionParameters().Parameter(2), 0);

	CMsvEntry* entry = paramSession->GetEntryL(messageEntry);
	CleanupStack::PushL(entry);
	
	CMsvStore* store = entry->EditStoreL();
	CleanupStack::PushL(store);
	
	MMsvAttachmentManager& manager = store->AttachmentManagerL();
	
	TInt attachmentCount = manager.AttachmentCount();
		
	for ( ; attachmentCount > 0 ; attachmentCount-- )
	{
	CMtfAsyncWaiter* waiter = CMtfAsyncWaiter::NewL();
	CleanupStack::PushL(waiter);
		
	if( attachIdFlag == 1 )
		{
		CMsvAttachment* attachInfo = manager.GetAttachmentInfoL(0);
		CleanupStack::PushL(attachInfo);
				
		manager.RemoveAttachmentL(attachInfo->Id(), waiter->iStatus);
		CleanupStack::PopAndDestroy(attachInfo);
		}
	else
		{
		manager.RemoveAttachmentL(0, waiter->iStatus);
		}
	waiter->StartAndWait();
	User::LeaveIfError(waiter->Result());
	CleanupStack::PopAndDestroy(waiter);
	}
	
	store->CommitL();
	
	CleanupStack::PopAndDestroy(2, entry); // store, entry

	TestCase().INFO_PRINTF2(_L("Test Action %S completed."), &KTestActionRemoveAllAttachments);
	TestCase().ActionCompletedL(*this);
	}
コード例 #11
0
//---------------------------------------------------------------
// CNativeMmsUtility::getAttachmentListFromAttManL
// @see header
//---------------------------------------------------------------
void CNativeMmsUtility::getAttachmentListFromAttManL(
                                                     ConvergedMessageAttachmentList& attachmentlist)
{
#ifdef _DEBUG_TRACES_
    qDebug() << " Enter CNativeMmsUtility::getAttachmentListFromAttManL";
#endif

    TUint count = iattachmanager->AttachmentCount();
    for (int i = 0; i < count; i++)
    {
        CMsvAttachment *attachment = iattachmanager->GetAttachmentInfoL(i);
        TPtrC8 mimetype = attachment->MimeType();
        QString filepath =
                XQConversions::s60DescToQString(attachment->FilePath());
        // converting directory separators from native to
        // universal (QT) format
        filepath.replace(KBackwardSlash, KForwardSlash);
        quint16 attachmenttype;
        if (isAttachment(attachment))
            attachmenttype = ConvergedMessageAttachment::EAttachment;
        else
            attachmenttype = ConvergedMessageAttachment::EUnknown;

        //smil files aren't of either type
        if (mimetype.CompareF(KMsgMimeSmil) == 0)
        {
            ConvergedMessageAttachment
                    * targetatt =
                            new ConvergedMessageAttachment(filepath,
                                                           ConvergedMessageAttachment::ESmil);
            attachmentlist << targetatt;
        }
        else
        {
            ConvergedMessageAttachment* targetatt =
                    new ConvergedMessageAttachment(filepath, attachmenttype);
            attachmentlist << targetatt;
        }
    }

#ifdef _DEBUG_TRACES_
    qDebug() << " Exit CNativeMmsUtility::getAttachmentListFromAttManL";
#endif

}
コード例 #12
0
EXPORT_C void CSmtpClientMtm::AddLinkedAttachmentL(const TDesC& aFilePath, const TDesC8& aMimeType, TUint aCharset, TRequestStatus& aStatus)
	{
	__ASSERT_DEBUG(iMsvEntry->Entry().iType.iUid==KUidMsvMessageEntryValue, gPanic(ESmtcMTMNotAMessageEntry));

	if( iAttachmentWaiter == NULL )
		{
		iAttachmentWaiter = CImAttachmentWaiter::NewL();
		}

	if (iEmailMessage == NULL)
		{		
		iEmailMessage = CImEmailMessage::NewL(*iMsvEntry);
		}
	else if (iEmailMessage->EmailEntryId() != iMsvEntry->EntryId())
		{
		delete iEmailMessage;
		iEmailMessage = NULL;
		iEmailMessage = CImEmailMessage::NewL(*iMsvEntry);
		}
	
	CMsvAttachment* attachmentInfo = CMsvAttachment::NewL(CMsvAttachment::EMsvLinkedFile);
	CleanupStack::PushL(attachmentInfo);
	
	attachmentInfo->SetMimeTypeL(aMimeType);
	
	TParse fileNameParser;
	User::LeaveIfError(fileNameParser.Set(aFilePath, NULL, NULL));
	attachmentInfo->SetAttachmentNameL(fileNameParser.NameAndExt());

	if( aCharset!=0 )
		{
		CMsvMimeHeaders* headers = CMsvMimeHeaders::NewLC();
		headers->SetMimeCharset(aCharset);
		headers->StoreL(*attachmentInfo);
		CleanupStack::PopAndDestroy(headers);
		}
	
	iEmailMessage->AttachmentManager().AddLinkedAttachmentL(aFilePath, attachmentInfo, iAttachmentWaiter->iStatus);
	CleanupStack::Pop(attachmentInfo);// ownership passed to attachment manager	

	iAttachmentWaiter->StartWaitingL(aStatus, iEmailMessage, EFalse);
	}
void CMtfTestActionSmtpRemoveEntryAttachmentById::RunTestL()
	{
	CMsvSession* paramSession = ObtainParameterReferenceL<CMsvSession>(TestCase(),ActionParameters().Parameter(0));
	TMsvId messageEntry = ObtainValueParameterL<TMsvId>(TestCase(),ActionParameters().Parameter(1));
	TMsvAttachmentId attachId = ObtainValueParameterL<TMsvAttachmentId>(TestCase(),ActionParameters().Parameter(2));

	CMsvEntry* entry = paramSession->GetEntryL(messageEntry);
	CleanupStack::PushL(entry);
	
	CImEmailMessage* emailMsg = CImEmailMessage::NewL(*entry);
	CleanupStack::PushL(emailMsg);
	
	MMsvAttachmentManager& manager = emailMsg->AttachmentManager();
	
	CMsvAttachment* attachInfo = manager.GetAttachmentInfoL(attachId);
	CleanupStack::PushL(attachInfo);
	
	// First ensure that the attachment is a file attachment
	if( attachInfo->Type() != CMsvAttachment::EMsvMessageEntry )
		{
		User::Leave(KErrGeneral);
		}
		
	// Get the linked file
	TMsvId msgId = attachInfo->EntryAttachmentId();
	CleanupStack::PopAndDestroy(attachInfo);
		
	// Remove the attachment
	CMtfAsyncWaiter* waiter = CMtfAsyncWaiter::NewL();
	CleanupStack::PushL(waiter);
	manager.RemoveAttachmentL(attachId, waiter->iStatus);
	waiter->StartAndWait();
	User::LeaveIfError(waiter->Result());
	CleanupStack::PopAndDestroy(waiter);	
	
	CleanupStack::PopAndDestroy(2, entry); // email msg, entry

	// Ensure that the message entry still exists
	CMsvEntry* checkEntry = paramSession->GetEntryL(msgId);
	delete checkEntry;
	checkEntry = NULL;
	}
コード例 #14
0
/**
Imports the Obex header list from the attachment. The header list is retrieved and
stored in this object. Any existing header data is over-written with the headers from
the attachment. If the headers have not been set, this obex list will still be
over written and result in zero headers.
@param aAttachment The attachment to retieve the header list from.
@leave System-wide error codes.
*/	
EXPORT_C void CObexHeaderList::ImportFromAttachmentL(CMsvAttachment& aAttachment)
	{
	TPtrC8 headerData;
	if( aAttachment.GetDesC8Attribute(KUidObexHeaders, headerData) == KErrNone )
		{
		// header data exists, attempt to import it
		RDesReadStream readStream(headerData);
		readStream.PushL();
		readStream >> *this;	
		CleanupStack::PopAndDestroy(&readStream);
		}
void CMtfTestActionRemoveFileAttachmentWithDestroy::ExecuteActionL()
	{
	TestCase().INFO_PRINTF2(_L("Test Action %S start..."), &KTestActionRemoveFileAttachmentWithDestroy);
	CMsvSession* paramSession = ObtainParameterReferenceL<CMsvSession>(TestCase(),ActionParameters().Parameter(0));
	TMsvId messageEntry = ObtainValueParameterL<TMsvId>(TestCase(),ActionParameters().Parameter(1));
	TMsvAttachmentId attachId = ObtainValueParameterL<TMsvAttachmentId>(TestCase(),ActionParameters().Parameter(2));

	CMsvEntry* entry = paramSession->GetEntryL(messageEntry);
	CleanupStack::PushL(entry);
	
	CMsvStore* store = entry->EditStoreL();
	CleanupStack::PushL(store);
	
	MMsvAttachmentManager& manager = store->AttachmentManagerL();
	
	CMsvAttachment* attachInfo = manager.GetAttachmentInfoL(attachId);
	CleanupStack::PushL(attachInfo);
	
	// First ensure that the attachment is a file attachment
	if( attachInfo->Type() != CMsvAttachment::EMsvFile )
		{
		User::Leave(KErrGeneral);
		}
	
	CleanupStack::PopAndDestroy(attachInfo);
	
	CMtfAsyncWaiter* waiter = CMtfAsyncWaiter::NewL();
	CleanupStack::PushL(waiter);
	manager.RemoveAttachmentL(attachId, waiter->iStatus);
	waiter->StartAndWait();
	User::LeaveIfError(waiter->Result());
	CleanupStack::PopAndDestroy(waiter);	
	
	// destroy the store without commit
	CleanupStack::PopAndDestroy(2, entry); // store, entry
	
	TestCase().INFO_PRINTF2(_L("Test Action %S completed."), &KTestActionRemoveFileAttachmentWithDestroy);
	TestCase().ActionCompletedL(*this); 
	}
コード例 #16
0
void CMtfTestActionAddEntryAttachment::RunTestL()
{
    CMsvSession* paramSession = ObtainParameterReferenceL<CMsvSession>(TestCase(),ActionParameters().Parameter(0));
    TMsvId messageEntry = ObtainValueParameterL<TMsvId>(TestCase(),ActionParameters().Parameter(1));
    TMsvId attachmentMessageEntry = ObtainValueParameterL<TMsvId>(TestCase(),ActionParameters().Parameter(2));

    CMsvEntry* entry = paramSession->GetEntryL(messageEntry);
    CleanupStack::PushL(entry);

    CMsvStore* store = entry->EditStoreL();
    CleanupStack::PushL(store);

    CMtfAsyncWaiter* waiter = CMtfAsyncWaiter::NewL();
    CleanupStack::PushL(waiter);

    CMsvAttachment* attachment = CMsvAttachment::NewL(CMsvAttachment::EMsvMessageEntry);
    CleanupStack::PushL(attachment);

    TMsvEntry attachmentEntry;
    TMsvId attachmentServiceEntry;
    User::LeaveIfError(paramSession->GetEntry(attachmentMessageEntry, attachmentServiceEntry, attachmentEntry));
    attachment->SetSize(attachmentEntry.iSize);

    MMsvAttachmentManager& manager = store->AttachmentManagerL();

    manager.AddEntryAsAttachmentL(attachmentMessageEntry, attachment, waiter->iStatus);
    CleanupStack::Pop(attachment); // ownership passed to manager
    waiter->StartAndWait();
    User::LeaveIfError(waiter->Result());
    CleanupStack::PopAndDestroy(waiter);

    TMsvAttachmentId attachmentId = attachment->Id();

    store->CommitL();

    CleanupStack::PopAndDestroy(2, entry); // store, entry

    StoreParameterL<TMsvAttachmentId>(TestCase(),attachmentId,ActionParameters().Parameter(3));
}
コード例 #17
0
/**
Exports the Obex header list to the attachment. The header list is then stored with
the attachment.
@param aAttachment The attachment to store the header list for.
@leave System-wide error codes.
*/
EXPORT_C void CObexHeaderList::ExportToAttachmentL(CMsvAttachment& aAttachment) const
	{
	// create a buffer stream to hold the header data
	CBufFlat* obexHdrBuf = CBufFlat::NewL(KObexHeaderListSegmentSize);
	CleanupStack::PushL(obexHdrBuf);
	
	// externalise the header list to the buffer
	RBufWriteStream writeStream(*obexHdrBuf);
	writeStream.PushL();
	writeStream << *this;
	writeStream.CommitL();
	CleanupStack::PopAndDestroy(&writeStream);
	
	// set the headers in the attachment
	aAttachment.SetDesC8AttributeL(KUidObexHeaders, obexHdrBuf->Ptr(0));

	CleanupStack::PopAndDestroy(obexHdrBuf);
	}
コード例 #18
0
/**
CheckAttachmentsL()
Compares attachments for the email messages aRecvEntry and aSentEntry using
expected results in aMailInfo

@param aRecvEntry
An identifier for the recieved email

@param aMailInfo
Expected state of recieved email attachments

@param aSentEntry
An identifier for the original email

@return
ETrue if attachments match otherwise EFalse
*/
TBool CT_MsgComparePopEmailMsgs::CheckAttachmentsL(TMsvEntry& aRecvEntry, CExpPop3MailInfo& aMailInfo, TMsvEntry& aSentEntry)
	{
	TBool ret = ETrue;
	CAttachmentItem* recvManager = CAttachmentItem::NewLC(*iSharedDataPOP.iSession, aRecvEntry);
	CAttachmentItem* sentManager = CAttachmentItem::NewLC(*iSharedDataPOP.iSession, aSentEntry);

	TInt recvCount = recvManager->MMsvAttachmentManager().AttachmentCount();	
	TInt sentCount = sentManager->MMsvAttachmentManager().AttachmentCount();

	TFileName recvFileName;
	TFileName sentFileName;

	if(recvCount == aMailInfo.GetNumAttachments())
		{
		for(TInt i=0;i<recvCount;i++)
			{
			for(TInt j=0;j<sentCount;j++)
				{
				CMsvAttachment* recvAttInfo = recvManager->MMsvAttachmentManager().GetAttachmentInfoL(i);
				CleanupStack::PushL(recvAttInfo);

				CMsvAttachment* sentAttInfo = sentManager->MMsvAttachmentManager().GetAttachmentInfoL(j);
				CleanupStack::PushL(sentAttInfo);

				if(recvAttInfo->AttachmentName().Compare(sentAttInfo->AttachmentName()) == 0)
					{
					recvFileName = recvAttInfo->FilePath();
					sentFileName = sentAttInfo->FilePath();
					ret = CompareFilesL(recvFileName, sentFileName);
					}
				CleanupStack::PopAndDestroy(2, recvAttInfo);		
				}
			}
		}
	else
		{
		INFO_PRINTF3(_L("Warning - Expected attachments mismatch recieved (%d) expected (%d)"),
								 recvCount, aMailInfo.GetNumAttachments());
		ret = EFalse;
		}
	CleanupStack::PopAndDestroy(2, recvManager); // recvManager,sentManager
	return ret;
	}
コード例 #19
0
void CMtfTestActionVerifyAttachmentInfo::ExecuteActionL()
	{
	TestCase().INFO_PRINTF2(_L("Test Action %S start..."), &KTestActionVerifyAttachmentInfo);
	CMsvAttachment* attachmentInfo = ObtainParameterReferenceL<CMsvAttachment>(TestCase(),ActionParameters().Parameter(0));
	HBufC*	paramFileName   = ObtainParameterReferenceL<HBufC>(TestCase(),ActionParameters().Parameter(1));
	TInt	paramFileSize   = ObtainValueParameterL<TInt>(TestCase(),ActionParameters().Parameter(2));
	HBufC*	paramMimeType   = ObtainParameterReferenceL<HBufC>(TestCase(),ActionParameters().Parameter(3));

	
	TestCase().INFO_PRINTF1(_L("VerifyAttachmentInfo....."));

	TestCase().INFO_PRINTF2(_L("Attachment Name - %S"), &attachmentInfo->AttachmentName());
	TestCase().INFO_PRINTF2(_L("Size - %d"), attachmentInfo->Size());
	
	TBuf<KMimeTypeLength> mimeType;
	mimeType.Copy(attachmentInfo->MimeType());
	TestCase().INFO_PRINTF2(_L("MimeType - %S"), &mimeType);
	

	TestCase().INFO_PRINTF1(_L("With.."));

	TestCase().INFO_PRINTF2(_L("Attachment Name - %S"), paramFileName);
	TestCase().INFO_PRINTF2(_L("Size - %d"), paramFileSize);
	TestCase().INFO_PRINTF2(_L("MimeType - %S"), paramMimeType);

	if ( 
		(paramFileName->Compare(attachmentInfo->AttachmentName()) == 0) &&
		(paramMimeType->Compare(mimeType) == 0) &&
		(paramFileSize == attachmentInfo->Size())
	   )
		{		
		}
	else
		{
		User::Leave(KErrGeneral);
		}

	TestCase().INFO_PRINTF2(_L("Test Action %S completed."), &KTestActionVerifyAttachmentInfo);
	TestCase().ActionCompletedL(*this);
	}
コード例 #20
0
ファイル: wwwp.CPP プロジェクト: cdaffara/symbiandump-mw2
//
//  StoreL() - Store bookmarks as an attachment file 
//	in the .eBM format. If the system runs out of memory while
//  the bookmarks are being written to the file, the file will be
//	deleted. For example, if 2 bookmarks have already been written
//	to the file, and the writing of the third bookmark fails, the
//	file will be deleted. Otherwise, a failure of file writing would
//	need to be handled differently from memory allocation failure.
//
void CWWWHotlistParser::StoreL(CMsvEntry& aEntry)
{
	TInt numberOfItems = iHotlistItemList->Count();
	
	if (numberOfItems>0)  // Only create a file if there is something to save!
	{

		// Generate fileName from msgId and bookmark file extension.
		// The file name consists of the msgId in hex format 
		// followed by .eBM. Sizeof operator returns the size of msgId
		// in bytes and each byte requires 2 hex digits to represent it,
		// hence sizeof is multipled by 2. Didn't want to make
		// fileNameLength constant because the size of TMsvId may change
		// in the future.

		TMsvId entryId = aEntry.Entry().Id();

		TInt fileNameLength = 2*sizeof(entryId) + 
				KEBookmarkExtension().Length();

		HBufC *fileName = HBufC::NewLC(fileNameLength);
			
		TPtr fileNameDes = fileName->Des();

		// The file name uses the hex representation of the entry Id.
		// If this changes to some other representation then
		// fileNameLength will need to be calculated differently.

		fileNameDes.Num(entryId,EHex);
			
		fileNameDes.Append(KEBookmarkExtension);

		// Get the attachment manager and create an empty attachment file
		CMsvStore* store = aEntry.EditStoreL();
		CleanupStack::PushL(store);
		
		MMsvAttachmentManagerSync& managerSync = store->AttachmentManagerExtensionsL();
		CMsvAttachment* attachment = CMsvAttachment::NewL(CMsvAttachment::EMsvFile);
		CleanupStack::PushL(attachment);
		attachment->SetAttachmentNameL(*fileName);
		RFile file;
		managerSync.CreateAttachmentL(*fileName, file, attachment);
		CleanupStack::Pop(attachment); // ownership passed
		CleanupClosePushL(file);

#ifdef SYMBIAN_BOOKMARK_DATABASE
		// Open the bookmark database ready to add the bookmarks
		RBkDatabase bookmarkDb;
		bookmarkDb.OpenL();
		CleanupClosePushL(bookmarkDb);
#endif // SYMBIAN_BOOKMARK_DATABASE

		// Stream each bookmark into the file.
		// The eBookmark file must contain only 8bit ascii.
		// Add a linefeed to the end of each line.
			
		for(TInt count=0; count < numberOfItems; count++)
			{
			CWWWHotlistItem &item = *iHotlistItemList->At(count);
			
			// Allocate enough space to hold the full bookmark entry.

			TInt length =	item.Name().Length() + 
							item.Url().Length()  + 
							KEBookmarkConstantChars;
			
			HBufC8 *writeBuf = HBufC8::NewLC(length);
			
			TPtr8 des = writeBuf->Des();

			des.Append(KEBookmarkItemBegin);
			des.Append(KEBookmarkItemURL);
			des.Append(item.Url());
			des.Append(KCRLinefeed);
			des.Append(KEBookmarkItemName);
			des.Append(item.Name());
			des.Append(KCRLinefeed);
			des.Append(KEBookmarkType);
			des.Append(KEBookmarkItemEnd);

			User::LeaveIfError(file.Write(des));
			
			CleanupStack::PopAndDestroy();
			
#ifdef SYMBIAN_BOOKMARK_DATABASE
			// Add the bookmark to the bookmark database
			RBkBookmark bookmark = bookmarkDb.CreateBookmarkL();
			CleanupClosePushL(bookmark);
			bookmark.SetTitleL(item.Name());
			// Convert Uri to 8-bit
			HBufC8* bookmarkUri = HBufC8::NewLC(item.Url().Length());
			bookmarkUri->Des().Copy(item.Url());
			bookmark.SetUriL(*bookmarkUri);
			CleanupStack::PopAndDestroy(2, &bookmark); // bookmarkUri, bookmark
#endif // SYMBIAN_BOOKMARK_DATABASE
			}
			
#ifdef SYMBIAN_BOOKMARK_DATABASE			
		// Commit all the added bookmarks and close bookmark db
		bookmarkDb.CommitL();
		CleanupStack::PopAndDestroy(&bookmarkDb);
#endif // SYMBIAN_BOOKMARK_DATABASE

		// File writing has completed, set the size in the attachment
		TInt fileSize = 0;
		User::LeaveIfError(file.Size(fileSize));
		attachment->SetSize(fileSize);
		
		// commit the changes
		store->CommitL();
		CleanupStack::PopAndDestroy(3, fileName); // file, store, fileName
	}
}
コード例 #21
0
/*
-----------------------------------------------------------------------------
RFile GetAttachmentFileL(TMsvAttachmentId aId)
----------------------------------------------------------------------------
*/
void CMailBoxContainer::CopyFileL(const TDesC& aFolderName)
{

	TFileName fileName,FullFilName;

	if(iSession && iSelectionBox && iListArray)
	{	
		TInt CurrItmIndex = iSelCopyItemIndex;
		iSelCopyItemIndex = -1;
		
		if(CurrItmIndex < 0 || CurrItmIndex >= iIDArray->Count())
		{
			CurrItmIndex = iSelectionBox->CurrentItemIndex();
		}
		
		TMsvSelectionOrdering sort;
		sort.SetShowInvisibleEntries(ETrue);
		sort.SetSorting(EMsvSortByDate);
		// Take a handle to the folder entry
		CMsvEntry* parentEntry = CMsvEntry::NewL(*iSession,iCurrentMailBox,sort);
		CleanupStack::PushL(parentEntry);
		
		// A selection of all BT entries
		CMsvEntrySelection* entries = parentEntry->ChildrenL();//ChildrenWithMtmL(KUidMsgTypeBt);
		CleanupStack::PushL(entries);
			
		//Process all entries
		if(CurrItmIndex >= 0 && CurrItmIndex < iIDArray->Count())
		{
			//Get entry
			CMsvEntry* btEntry = iSession->GetEntryL(iIDArray->At(CurrItmIndex).iEnt);
			CleanupStack::PushL(btEntry);
			
			//Then get entrys child
			CMsvEntrySelection* btChildren = btEntry->ChildrenL();
			CleanupStack::PushL(btChildren);
		
			btEntry->SetEntryL(iIDArray->At(CurrItmIndex).iMsg);
									
	
			if (btEntry->HasStoreL())
			{
				CMsvStore* store = btEntry->ReadStoreL();
				CleanupStack::PushL(store);
				
				MMsvAttachmentManager& attMngr = store->AttachmentManagerL();
				CMsvAttachment* attachment = attMngr.GetAttachmentInfoL(iIDArray->At(CurrItmIndex).iAtt);
				if(attachment)
				{
					fileName.Copy(attachment->AttachmentName());
					
					delete attachment;
					attachment = NULL;
				
					TBool OkToSave(EFalse),SkipMe(EFalse);
				
					do
					{
						FullFilName.Zero();
						StringLoader::Load(FullFilName,R_SH_STR_FILENAME);
					
						CAknTextQueryDialog* Dialog = CAknTextQueryDialog::NewL(fileName,CAknQueryDialog::ENoTone);
						Dialog->PrepareLC(R_ASK_NAME_DIALOG);
						Dialog->SetPromptL(FullFilName);
						if(Dialog->RunLD())
						{
							FullFilName.Copy(aFolderName);
							FullFilName.Append(fileName);
			
							if(BaflUtils::FileExists(CEikonEnv::Static()->FsSession(),FullFilName))
							{
								HBufC* TmpText = StringLoader::LoadLC(R_SH_STR_FILOVERRT);
								
								CAknQueryDialog* dlg = CAknQueryDialog::NewL();
								if(dlg->ExecuteLD(R_QUERY,*TmpText))
								{
									TInt Err = CEikonEnv::Static()->FsSession().Delete(FullFilName);
									if(Err == KErrNone)
									{
										OkToSave = ETrue;
									}
									else
									{
										iUtils.GetFileUtils().ShowFileErrorNoteL(FullFilName,Err);
									}
								}
								
								CleanupStack::PopAndDestroy(TmpText);
							}
							else
							{
								OkToSave = ETrue;
							}
						}
						else
						{
							SkipMe = ETrue;
						}
						
					}while(!SkipMe && !OkToSave);
					
					if(OkToSave)
					{
						
						delete iRFileCopier;
						iRFileCopier = NULL;
						
						iRFileCopier = CRFileCopier::NewL(*this,CEikonEnv::Static()->FsSession(),ETrue);
						
						RFile SourceFil(attMngr.GetAttachmentFileL(iIDArray->At(CurrItmIndex).iAtt));
						iRFileCopier->StartCopyL(SourceFil,FullFilName);
						SourceFil.Close();
					}
				}
				
				CleanupStack::PopAndDestroy(store);
			}
			
			CleanupStack::PopAndDestroy(2);
		}				
		CleanupStack::PopAndDestroy(2);
	}

}
LOCAL_C void CreateNewPlaintextMessageL()
	{
	CTestActive* testActive = new(ELeave) CTestActive();
	CleanupStack::PushL(testActive);
	TMsvEmailTypeList msvEmailTypeList = 0;
	TMsvPartList partList = (KMsvMessagePartBody | KMsvMessagePartAttachments);
	CImEmailOperation* emailOperation = CImEmailOperation::CreateNewL(testActive->iStatus, *(testUtils->iMsvSession),KMsvGlobalOutBoxIndexEntryId, partList, msvEmailTypeList, KUidMsgTypeSMTP);
	CleanupStack::PushL(emailOperation);
	TestMsvOperationTimer* testMsvOperationTimer = TestMsvOperationTimer::NewLC(test.Console(), emailOperation, test);
	testActive->StartL();
	testMsvOperationTimer->IssueRequest();
	CActiveScheduler::Start();
	//check progress
	TMsvId temp;
	TPckgC<TMsvId> paramPack(temp);
	const TDesC8& progBuf = emailOperation->ProgressL();
	paramPack.Set(progBuf);
	TMsvId newMessageId;
	newMessageId = paramPack();
	test(newMessageId != NULL);
	CImEmailMessage* imEmailMessage = CImEmailMessage::NewLC(*(testUtils->iMsvEntry));
	// Make sure you are set on the Message Id
	testUtils->iMsvEntry->SetEntryL(newMessageId);
	CMsvAttachment* attachmentInfo = CMsvAttachment::NewL(CMsvAttachment::EMsvFile);
	CleanupStack::PushL(attachmentInfo);
	attachmentInfo->SetAttachmentNameL(KAttachmentFileName1());
	CleanupStack::Pop(attachmentInfo);	 // ownership passed to attachment manager
	imEmailMessage->AttachmentManager().AddAttachmentL(KAttachment1, attachmentInfo, testActive->iStatus);
	testActive->StartL();
	CActiveScheduler::Start();	// wait for the asynch operation to complete
	if (testActive->iStatus.Int())
		{
		testUtils->WriteComment(_L("CreateNewPlaintextMessageWithIncompleteAttachmentL failed"));
		testUtils->TestHarnessFailed(testActive->iStatus.Int());
		}
	testUtils->iMsvEntry->SetEntryL(newMessageId);
	CMsvAttachment* attachmentInfo1 = CMsvAttachment::NewL(CMsvAttachment::EMsvFile);
	CleanupStack::PushL(attachmentInfo1);
	attachmentInfo1->SetAttachmentNameL(KAttachmentFileName2());
    CleanupStack::Pop(attachmentInfo1);	 // ownership passed to attachment manager
	imEmailMessage->AttachmentManager().AddAttachmentL(KAttachment2, attachmentInfo1, testActive->iStatus);
	testActive->StartL();
	CActiveScheduler::Start();	// wait for the asynch operation to complete
	if (testActive->iStatus.Int())
		{
		testUtils->WriteComment(_L("CreateNewPlaintextMessageWithIncompleteAttachmentL failed"));
		testUtils->TestHarnessFailed(testActive->iStatus.Int());
		}
	testUtils->iMsvEntry->SetEntryL(newMessageId);
	CMsvAttachment* attachmentInfo2 = CMsvAttachment::NewL(CMsvAttachment::EMsvFile);
	CleanupStack::PushL(attachmentInfo2);
	attachmentInfo2->SetAttachmentNameL(KAttachmentFileName3());
    CleanupStack::Pop(attachmentInfo2);	 // ownership passed to attachment manager
	imEmailMessage->AttachmentManager().AddAttachmentL(KAttachment3, attachmentInfo2, testActive->iStatus);
	testActive->StartL();
	CActiveScheduler::Start();	// wait for the asynch operation to complete
	if (testActive->iStatus.Int())
		{
		testUtils->WriteComment(_L("CreateNewPlaintextMessageWithIncompleteAttachmentL failed"));
		testUtils->TestHarnessFailed(testActive->iStatus.Int());
		}	
	const TDesC8& progBuf2 = imEmailMessage->ProgressL();	
	paramPack.Set(progBuf2);
	TMsvId attachmentId = paramPack();
	testUtils->WriteComment(_L("\t Created New plaintext message"));
	testUtils->iMsvEntry->SetEntryL(attachmentId);
	
    imEmailMessage->GetAttachmentsListL(testActive->iStatus, newMessageId, CImEmailMessage::EAllAttachments, CImEmailMessage::EThisMessageOnly);	
  	testActive->StartL();
	CActiveScheduler::Start();	// wait for the asynch operation to complete
    const CMsvEntrySelection& selection = imEmailMessage->Selection();
	testUtils->Printf(KTotalNoOfAttachment , selection.Count());
	imEmailMessage->GetBodyTextEntryIdL(testActive->iStatus,newMessageId,CImEmailMessage::EThisMessageOnly);
	testActive->StartL();
	CActiveScheduler::Start();	// wait for the asynch operation to complete
	const CMsvEntrySelection& selection1 = imEmailMessage->Selection();
	TInt count = imEmailMessage->Selection().Count();
    if( count > 0)
			{
			// Get the Id of the body text
			// The body text part Id is present at index 0.  Not checking for other
			//  Ids, as currently only Plain text part is verified.
			TMsvId	iBodyTextId = imEmailMessage->Selection().At(0);
			testUtils->Printf(KBodytextId, iBodyTextId);
			}
	CleanupStack::PopAndDestroy(); // imEmailMessage  
		testUtils->iMsvEntry->SetEntryL(attachmentId);
    CMsvStore* store1 = testUtils->iMsvEntry->EditStoreL();
	CleanupStack::PushL(store1);
	CImMimeHeader *Head1 = CImMimeHeader::NewLC();
    Head1->RestoreL(*store1);
	const TPtrC8 contentSubType = Head1->ContentSubType();
	store1->CommitL();
    
    if(contentSubType.Size() == 0 )
    {
    testUtils->Printf(_L("ContentSubType Has NO SUB CONTENT****") );
    test(contentSubType.Size() != 0);
    }
    else
    {
    testUtils->Printf(_L("ContentSubType Has ****SUB CONTENT****"));	
    }
   	CleanupStack::PopAndDestroy(2, store1);//store1,Head1,Buffer
    testUtils->iMsvEntry->SetEntryL(newMessageId);
    CMsvStore* store = testUtils->iMsvEntry->EditStoreL();
	CleanupStack::PushL(store);
	CImHeader* header = CImHeader::NewLC();
	header->RestoreL(*store);
	TInt serverLength = testUtils->MachineName().Length();
	HBufC* serverad = HBufC::NewL(serverLength + 7 ); // 7 is the length of KServerAddress
	CleanupStack::PushL(serverad);
	serverad->Des().Copy(testUtils->MachineName());
	serverad->Des().Append(KServer);	
    HBufC* emailaddress = HBufC::NewL(serverLength + 8 + serverad->Des().Length() + 1 );
   	CleanupStack::PushL(emailaddress);
   	emailaddress->Des().Copy(testUtils->MachineName());
   	emailaddress->Des().Append(KAt);
   	emailaddress->Des().Append(*serverad);
   	header->ToRecipients().AppendL(*emailaddress);
	header->SetSubjectL(_L("Test sending message using CMsvEntry::CopyL!!"));
	header->StoreL(*store);
	store->CommitL();
	CleanupStack::PopAndDestroy(emailaddress);
	CleanupStack::PopAndDestroy(serverad);
	CleanupStack::PopAndDestroy(5,testActive); // header,store,testMsvOperationTimer,emailOperation,testActive
	
		
	}
コード例 #23
0
void CheckNewAttachmentL(const TDesC& aFileName, TInt aFileSize, const TDesC8& aMimeType, TUint aCharset, TBool aLinkedAttachment)
	{
	// Check that file exists in the store and it matches our control file.
	CDummyObserver* ob1 = new(ELeave) CDummyObserver;
	CleanupStack::PushL(ob1);
	CMsvSession* session = CMsvSession::OpenSyncL(*ob1);
	CleanupStack::PushL(session);
	CMsvEntry* cEntry = CMsvEntry::NewL(*session, KMsvDraftEntryId, 
		TMsvSelectionOrdering(KMsvNoGrouping,EMsvSortByNone,ETrue));
	CleanupStack::PushL(cEntry);
	CMsvEntrySelection* selection = cEntry->ChildrenL();
	CleanupStack::PushL(selection);

	test(selection->Count() == 1);
	cEntry->SetEntryL((*selection)[0]);
	
	CMsvStore* store = cEntry->ReadStoreL();
	CleanupStack::PushL(store);
	
	MMsvAttachmentManager& attachmentMgr = store->AttachmentManagerL();
	TInt count = attachmentMgr.AttachmentCount();
	test(count > 0);
	
	TBool found = EFalse;
	
	while( count-- > 0 && !found )
		{
		CMsvAttachment* attachmentInfo = attachmentMgr.GetAttachmentInfoL(count);
		CleanupStack::PushL(attachmentInfo);

		// Check the attachment info is what we expect.
		TParse parser1;
		TParse parser2;
		parser1.Set(attachmentInfo->FilePath(), NULL, NULL);
		parser2.Set(aFileName, NULL, NULL);

		found = ETrue;
		if (aLinkedAttachment)
			{
			found = found && (attachmentInfo->Type() == CMsvAttachment::EMsvLinkedFile);  // Check it's a linked file.
			found = found && (parser1.DriveAndPath() == parser2.DriveAndPath());
			}
		else
			{
			found = found && (attachmentInfo->Type() == CMsvAttachment::EMsvFile);  // Check it's a file.
			found = found && (parser1.DriveAndPath() != parser2.DriveAndPath());
			}
			
		found = found && (attachmentInfo->MimeType().Match(aMimeType) == 0);  // Check mime type matches.
		found = found && (parser1.NameAndExt() == parser2.NameAndExt()); // This necessarily correct?
		found = found && (attachmentInfo->Size() == aFileSize); // Check size matches.
		
		// check charset matches
		CMsvMimeHeaders* mimeHeaders = CMsvMimeHeaders::NewLC();
		mimeHeaders->RestoreL(*attachmentInfo);
		found = found && (mimeHeaders->MimeCharset() == aCharset);
		
		CleanupStack::PopAndDestroy(2, attachmentInfo); // mimeHeaders, attachmentInfo
		}
	test(found);

	CleanupStack::PopAndDestroy(5, ob1); // store, selection, cEntry, sesion, ob1
	}
コード例 #24
0
// ---------------------------------------------------------
// CMmsAttachmentHandler::CreateTextAttachmentL
// ---------------------------------------------------------
EXPORT_C void CMmsAttachmentHandler::CreateTextAttachmentL(
    CMsvStore& aStore,
    TMsvAttachmentId& aAttachmentId,
    const TDesC& aText,
    const TDesC& aFile,
    RFs& aFs,
    TDriveUnit aMessageDrive,
    TBool aConvertParagraphSeparator /*= ETrue*/ )
    {
    
    HBufC* convertedText = NULL;
    TPtrC text;
    
    if ( aConvertParagraphSeparator )
        {
        convertedText = CMsgTextUtils::ConvertParagraphSeparatorsLC( aText );
        text.Set( convertedText->Des() );
        }
    else
        {
        text.Set( aText );
        }
    
    const TInt KMmsMaxBytesPerCharacter = 4;    
	// coverity[incorrect_multiplication][buffer_alloc]
    HBufC8* buffer = HBufC8::NewL( text.Length() * KMmsMaxBytesPerCharacter ); // paranoid.
    CleanupStack::PushL( buffer );
    TPtr8 buf8 = buffer->Des();

    CMsvMimeHeaders* mimeHeaders = CMsvMimeHeaders::NewL();
    CleanupStack::PushL( mimeHeaders );

    // attaInfo must be on top of stack because the ownership will be transferred
    // to attacment manager.    
    CMsvAttachment* attaInfo = CMsvAttachment::NewL(CMsvAttachment::EMsvFile);
    CleanupStack::PushL( attaInfo );
    
    TPtrC8 contentType;
    contentType.Set( KMmsTextPlain );
    
    TInt position = contentType.Find( KMmsSlash8 );
    mimeHeaders->SetContentTypeL( contentType.Left( position ) );
    mimeHeaders->SetContentSubTypeL( contentType.Mid( position + 1 ) );
    attaInfo->SetMimeTypeL( contentType );
    attaInfo->SetAttachmentNameL( aFile );
    
    mimeHeaders->SetMimeCharset( KMmsUtf8 );
    mimeHeaders->SetSuggestedFilenameL( aFile );
    
    // if conversion fails, something is really seriously wrong
    TInt error = CnvUtfConverter::ConvertFromUnicodeToUtf8( buf8, text );
  
    if ( TMmsGenUtils::DiskSpaceBelowCriticalLevelL( 
        &aFs,
        buf8.Length() + mimeHeaders->Size() + KMmsIndexEntryExtra,
        aMessageDrive ) )
        {
        // we use standard error code here
        User::Leave( KErrDiskFull );
        }
    else
        {
        User::LeaveIfError( error );    
        }
        
    attaInfo->SetSize( buf8.Length() );
    mimeHeaders->StoreL( *attaInfo ); // Mime headers are streamed into atta info

    MMsvAttachmentManagerSync& attaManSync = aStore.AttachmentManagerExtensionsL();
    
    RFile attaFile;
    attaManSync.CreateAttachmentL( aFile, attaFile, attaInfo );
    CleanupStack::Pop( attaInfo ); // attaInfo ownership was transferred.
    aAttachmentId = attaInfo->Id();

    // Now our file handle is open for writing
    
    if ( buf8.Length() > 0 )
        {
        attaFile.Write( buf8 );
        error = attaFile.Flush();
        }
    attaFile.Close();
    
    if ( error != KErrNone )
        {
        // Something went wrong when we tried to write our data.
        // We must delete the attachment as it does not contain the
        // intended data.
        RemoveAttachmentL( aAttachmentId, aStore );
        aAttachmentId = 0;
        }

    CleanupStack::PopAndDestroy( mimeHeaders );
    CleanupStack::PopAndDestroy( buffer );
    
    if ( convertedText )
        {
        CleanupStack::PopAndDestroy( convertedText );
        convertedText = NULL;
        }
        
    User::LeaveIfError( error );    
        
    }
コード例 #25
0
// ---------------------------------------------------------
// CMmsAttachmentHandler::CreateUTF8TextAttachmentFromFileL
// ---------------------------------------------------------
EXPORT_C void CMmsAttachmentHandler::CreateUTF8TextAttachmentFromFileL(
    CMsvStore& aStore,
    TMsvAttachmentId& aAttachmentId,
    RFile& aFile,
    RFs& aFs,
    TDriveUnit aMessageDrive )
    {
    
    _LIT8 ( KMmsCrLf8, "\x00D\x00A" ); // 8 bit line feed
    TInt size = 0;
    TInt error = KErrNone;
    error = aFile.Size( size );
    
    User::LeaveIfError( error ); // if can't get file size, we are in trouble

    TFileName* filename = new( ELeave ) TFileName;
    CleanupStack::PushL( filename );
    
    // 256 characters for each read
    HBufC* textBuffer = HBufC::NewL( KMmsTextBufferSize );
    CleanupStack::PushL( textBuffer );
    TPtr textPtr = textBuffer->Des();

    HBufC8* buffer = HBufC8::NewL( KMmsTextBufferSize * KMmsMaxBytesPerCharacter ); // paranoid.
    TInt fileSize = 0; // we don't know how big the file will be after conversion
    CleanupStack::PushL( buffer );
    TPtr8 buf8 = buffer->Des();

    CMsvMimeHeaders* mimeHeaders = CMsvMimeHeaders::NewL();
    CleanupStack::PushL( mimeHeaders );

    // attaInfo must be on top of stack because the ownership will be transferred
    // to attacment manager.    
    CMsvAttachment* attaInfo = CMsvAttachment::NewL( CMsvAttachment::EMsvFile );
    CleanupStack::PushL( attaInfo );
    
    TPtrC8 contentType;
    contentType.Set( KMmsTextPlain );
    
    TInt position = contentType.Find( KMmsSlash8 );
    mimeHeaders->SetContentTypeL( contentType.Left( position ) );
    mimeHeaders->SetContentSubTypeL( contentType.Mid( position + 1 ) );
    attaInfo->SetMimeTypeL( contentType );
    
    filename->Copy( TPtrC() );
  	aFile.Name( *filename ); // if this returns error, filename should be empty - no suggestion.
    attaInfo->SetAttachmentNameL( *filename );
    mimeHeaders->SetSuggestedFilenameL( *filename );
    mimeHeaders->SetMimeCharset( KMmsUtf8 );
    
    if ( TMmsGenUtils::DiskSpaceBelowCriticalLevelL( 
        &aFs,
        size * KMmsUnicodeToUtf2MaxIncrease + mimeHeaders->Size() + KMmsIndexEntryExtra,
        aMessageDrive ) )
        {
        // we use standard error code here
        User::Leave( KErrDiskFull );
        }
       
    mimeHeaders->StoreL( *attaInfo ); // Mime headers are streamed into atta info

    MMsvAttachmentManagerSync& attaManSync = aStore.AttachmentManagerExtensionsL();
    
    RFile attaFile;
    attaManSync.CreateAttachmentL( *filename, attaFile, attaInfo );
    CleanupStack::Pop( attaInfo ); // attaInfo ownership was transferred.
    aAttachmentId = attaInfo->Id();

    // Now our file handle is open for writing
    
    error = KErrNone;
    TMmsFileText textFile;
    textFile.Set( aFile );

    while ( error == KErrNone || error == KErrTooBig )
        {
        error = textFile.Read( textPtr );
        TBool appendCRLF = ETrue;
        if ( error == KErrTooBig )
            {
            appendCRLF = EFalse;
            error = KErrNone;
            }
        if ( error != KErrEof )
            {
            // if conversion fails, something is really seriously wrong
            error = CnvUtfConverter::ConvertFromUnicodeToUtf8( buf8, textPtr );
            }
        if ( error == KErrNone )
            {
            error = attaFile.Write( buf8 );
            if ( error == KErrNone )
                {
                fileSize += buf8.Length();
                if ( appendCRLF )
                    {
                    error = attaFile.Write( KMmsCrLf8 );
                    fileSize += KMmsLengthOfCRlf; // add length of carriage return/line feed
                    }
                }
            }
        }
        
    if ( error == KErrEof )
        {
        // end of file has been reached successfully
        error = KErrNone;
        }

    if ( error == KErrNone )
        {
        error = attaFile.Flush();
        }
    attaFile.Close();
    
    if ( error != KErrNone )
        {
        // Something went wrong when we tried to write our data.
        // We must delete the attachment as it does not contain the
        // intended data.
        RemoveAttachmentL( aAttachmentId, aStore );
        aAttachmentId = 0;
        }
    else
        {
        // If data writing was successful, the amount of data written
        // is now stored in fileSize.
        // Attachment info structure must be updated
        MMsvAttachmentManager& attaMan = aStore.AttachmentManagerL();
        attaInfo = attaMan.GetAttachmentInfoL( aAttachmentId );
        CleanupStack::PushL( attaInfo );
        attaInfo->SetSize( fileSize );
        attaManSync.ModifyAttachmentInfoL( attaInfo );
        // attachment manager now owns the attachment info
        CleanupStack::Pop( attaInfo ); // attaInfo
        }
        
    CleanupStack::PopAndDestroy( mimeHeaders );
    CleanupStack::PopAndDestroy( buffer );
    CleanupStack::PopAndDestroy( textBuffer );
    CleanupStack::PopAndDestroy( filename );
    
    User::LeaveIfError( error );
    
    }
コード例 #26
0
//---------------------------------------------------------------
// CNativeMmsUtility::getByUrlL
// @see header
//---------------------------------------------------------------
const QString CNativeMmsUtility::getByUrlL(const TDesC& url)
{
#ifdef _DEBUG_TRACES_
    qDebug() << " Enter CNativeMmsUtility::getByUrlL";
#endif

    CMsvAttachment* targetattachment = NULL;
    TBool found = EFalse;

    //newlc puts it on cleanupstack
    HBufC8* url8bit = HBufC8::NewLC(url.Length());

    CUri16* decodedUri = NULL;
    TUriParser8 parser;

    //get the uri in display format
    if (url.MatchF(KContentIdString) == 0)
    {
        //Remove "cid:" from the beginning
        url8bit->Des().Copy(url.Right(url.Length()
                - KContentIdString().Length() + 1));
        parser.Parse(*url8bit);
    }
    else
    {
        url8bit->Des().Copy(url);
        parser.Parse(*url8bit);
    }
    decodedUri = UriUtils::ConvertToDisplayFormL(parser);
    CleanupStack::PushL(decodedUri);

    //run through the attachements to check for a match
    TUint count = iattachmanager->AttachmentCount();
    for (int i = 0; i < count && !found; i++)
    {
        CMsvAttachment *attachment = iattachmanager->GetAttachmentInfoL(i);
        CleanupStack::PushL(attachment);

        //restore mimeheaders from the attachment
        CMsvMimeHeaders* mimeheaders = CMsvMimeHeaders::NewL();
        CleanupStack::PushL(mimeheaders);
        mimeheaders->RestoreL(*attachment);

        //check for a match with content-loc and then content-id
        if (resolvedByContentLocL(mimeheaders->ContentLocation(), *decodedUri)
                || resolvedByContentIdL(mimeheaders->ContentId(), *decodedUri))
        {
            targetattachment = CMsvAttachment::NewL(*attachment);
            found = ETrue;
        }

        CleanupStack::PopAndDestroy(2, attachment); //mimeheaders, attachment
    }

    CleanupStack::PopAndDestroy(decodedUri);
    if (url8bit)
        CleanupStack::PopAndDestroy(url8bit);

    if (targetattachment)
    {
#ifdef _DEBUG_TRACES_
        qDebug() << " Exit CNativeMmsUtility::getByUrlL";
#endif

        return XQConversions::s60DescToQString(targetattachment->FilePath());
    }
    else
    {
#ifdef _DEBUG_TRACES_
        qDebug() << " Exit CNativeMmsUtility::getByUrlL";
#endif

        return QString();
    }
}
コード例 #27
0
//---------------------------------------------------------------
// CNativeMmsUtility::getRemainingAttachmentsFromAttManL
// @see header
//---------------------------------------------------------------
void CNativeMmsUtility::getRemainingAttachmentsFromAttManL(
                                                           ConvergedMessageAttachmentList& attachmentlist)
{
#ifdef _DEBUG_TRACES_
    qDebug() << " Enter CNativeMmsUtility::getRemainingAttachmentsFromAttManL";
#endif

    TUint count = iattachmanager->AttachmentCount();
    for (int i = 0; i < count; i++)
    {
        CMsvAttachment *attachment = iattachmanager->GetAttachmentInfoL(i);
        TPtrC8 mimetype = attachment->MimeType();
        QString filepath =
                XQConversions::s60DescToQString(attachment->FilePath());
        // converting directory separators from native to
        // universal (QT) format
        filepath.replace(KBackwardSlash, KForwardSlash);

        //create convergedmessage attachment to match with inline objects
        ConvergedMessageAttachment
                compareatt(filepath, ConvergedMessageAttachment::EInline);

        //before adding to the list check if already present in the list
        TBool found = EFalse;
        TUint listcount = attachmentlist.count();
        for (int j = 0; j < listcount && !found; j++)
        {
            if (compareatt == *attachmentlist.at(j))
            {
                found = ETrue;
            }
        }

        //no match found in the list
        if (!found)
        {
            //smil files aren't of either type
            if (mimetype.CompareF(KMsgMimeSmil) == 0)
            {
                ConvergedMessageAttachment
                        * targetatt =
                                new ConvergedMessageAttachment(filepath,
                                                               ConvergedMessageAttachment::ESmil);
                attachmentlist << targetatt;
            }
            else
            {
                ConvergedMessageAttachment
                        * targetatt =
                                new ConvergedMessageAttachment(filepath,
                                                               ConvergedMessageAttachment::EAttachment);
                attachmentlist << targetatt;
            }
        }
    }

#ifdef _DEBUG_TRACES_
    qDebug() << " Exit CNativeMmsUtility::getRemainingAttachmentsFromAttManL";
#endif

    return;
}