/**
@see DVBT_NIM_FP_INITIALIZE
*/
int
rtl2832_fc2580_Initialize(
DVBT_NIM_MODULE *pNim
)
{
typedef struct
{
int RegBitName;
unsigned long Value;
}
REG_VALUE_ENTRY;
static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2832_FC2580_ADDITIONAL_INIT_REG_TABLE_LEN] =
{
// RegBitName, Value
{DVBT_DAGC_TRG_VAL, 0x39 },
{DVBT_AGC_TARG_VAL_0, 0x0 },
{DVBT_AGC_TARG_VAL_8_1, 0x5a },
{DVBT_AAGC_LOOP_GAIN, 0x16 },
{DVBT_LOOP_GAIN2_3_0, 0x6 },
{DVBT_LOOP_GAIN2_4, 0x1 },
{DVBT_LOOP_GAIN3, 0x16 },
{DVBT_VTOP1, 0x35 },
{DVBT_VTOP2, 0x21 },
{DVBT_VTOP3, 0x21 },
{DVBT_KRF1, 0x0 },
{DVBT_KRF2, 0x40 },
{DVBT_KRF3, 0x10 },
{DVBT_KRF4, 0x10 },
{DVBT_IF_AGC_MIN, 0x80 },
{DVBT_IF_AGC_MAX, 0x7f },
{DVBT_RF_AGC_MIN, 0x9c },
{DVBT_RF_AGC_MAX, 0x7f },
{DVBT_POLAR_RF_AGC, 0x0 },
{DVBT_POLAR_IF_AGC, 0x0 },
{DVBT_AD7_SETTING, 0xe9f4 },
};
TUNER_MODULE *pTuner;
DVBT_DEMOD_MODULE *pDemod;
int i;
int RegBitName;
unsigned long Value;
// Get tuner module and demod module.
pTuner = pNim->pTuner;
pDemod = pNim->pDemod;
// Enable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize tuner.
if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Disable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize demod.
if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod IF frequency with 0 Hz.
if(pDemod->SetIfFreqHz(pDemod, IF_FREQ_0HZ) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod spectrum mode with SPECTRUM_NORMAL.
if(pDemod->SetSpectrumMode(pDemod, SPECTRUM_NORMAL) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod registers.
for(i = 0; i < RTL2832_FC2580_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
{
// Get register bit name and its value.
RegBitName = AdditionalInitRegValueTable[i].RegBitName;
Value = AdditionalInitRegValueTable[i].Value;
// Set demod registers
if(pDemod->SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
goto error_status_set_registers;
}
// Set TS interface according to TS interface mode.
switch(pNim->DemodTsInterfaceMode)
{
case TS_INTERFACE_PARALLEL:
// Set demod TS interface with parallel mode.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_SERIAL, 0) != FUNCTION_SUCCESS)
goto error_status_set_registers;
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_CDIV_PH0, 9) != FUNCTION_SUCCESS)
goto error_status_set_registers;
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_CDIV_PH1, 9) != FUNCTION_SUCCESS)
goto error_status_set_registers;
break;
default:
case TS_INTERFACE_SERIAL:
// Set demod TS interface with serial mode.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_SERIAL, 1) != FUNCTION_SUCCESS)
goto error_status_set_registers;
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_CDIV_PH0, 2) != FUNCTION_SUCCESS)
goto error_status_set_registers;
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_CDIV_PH1, 2) != FUNCTION_SUCCESS)
goto error_status_set_registers;
break;
}
return FUNCTION_SUCCESS;
error_status_execute_function:
error_status_set_registers:
return FUNCTION_ERROR;
}
/**
@see DVBT_NIM_FP_SET_PARAMETERS
*/
s32
rtl2832_tda18272_SetParameters(
DVBT_NIM_MODULE *pNim,
u64 RfFreqHz,
s32 BandwidthMode
)
{
TUNER_MODULE *pTuner;
DVBT_DEMOD_MODULE *pDemod;
TDA18272_EXTRA_MODULE *pTunerExtra;
s32 TunerStandardBandwidthMode;
u64 IfFreqHz;
// Get tuner module and demod module.
pTuner = pNim->pTuner;
pDemod = pNim->pDemod;
// Get tuner extra module.
pTunerExtra = &(pTuner->Extra.Tda18272);
// Enable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Determine TunerBandwidthMode according to bandwidth mode.
switch(BandwidthMode)
{
default:
case DVBT_BANDWIDTH_6MHZ: TunerStandardBandwidthMode = TDA18272_STANDARD_BANDWIDTH_DVBT_6MHZ; break;
case DVBT_BANDWIDTH_7MHZ: TunerStandardBandwidthMode = TDA18272_STANDARD_BANDWIDTH_DVBT_7MHZ; break;
case DVBT_BANDWIDTH_8MHZ: TunerStandardBandwidthMode = TDA18272_STANDARD_BANDWIDTH_DVBT_8MHZ; break;
}
// Set tuner standard and bandwidth mode with TunerStandardBandwidthMode.
if(pTunerExtra->SetStandardBandwidthMode(pTuner, TunerStandardBandwidthMode) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set tuner RF frequency in Hz.
// Note: Must run SetRfFreqHz() after SetStandardBandwidthMode(), because SetRfFreqHz() needs some
// SetStandardBandwidthMode() information.
if(pTuner->SetRfFreqHz(pTuner, RfFreqHz) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Get tuner IF frequency in Hz.
// Note: 1. Must run GetIfFreqHz() after SetRfFreqHz(), because GetIfFreqHz() needs some SetRfFreqHz() information.
// 2. TDA18272 tuner uses dynamic IF frequency.
if(pTunerExtra->GetIfFreqHz(pTuner, &IfFreqHz) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Disable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Set demod IF frequency according to IfFreqHz.
// Note: TDA18272 tuner uses dynamic IF frequency.
if(pDemod->SetIfFreqHz(pDemod, IfFreqHz) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod bandwidth mode.
if(pDemod->SetBandwidthMode(pDemod, BandwidthMode) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Reset demod particular registers.
if(pDemod->ResetFunction(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Reset demod by software reset.
if(pDemod->SoftwareReset(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
return FUNCTION_SUCCESS;
error_status_execute_function:
error_status_set_registers:
return FUNCTION_ERROR;
}
/**
@see DVBT_NIM_FP_INITIALIZE
*/
int
rtl2832_fc0013_Initialize(
DVBT_NIM_MODULE *pNim
)
{
typedef struct
{
int RegBitName;
unsigned long Value;
}
REG_VALUE_ENTRY;
static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2832_FC0013_ADDITIONAL_INIT_REG_TABLE_LEN] =
{
// RegBitName, Value
{DVBT_DAGC_TRG_VAL, 0x5a },
{DVBT_AGC_TARG_VAL_0, 0x0 },
{DVBT_AGC_TARG_VAL_8_1, 0x5a },
{DVBT_AAGC_LOOP_GAIN, 0x16 },
{DVBT_LOOP_GAIN2_3_0, 0x6 },
{DVBT_LOOP_GAIN2_4, 0x1 },
{DVBT_LOOP_GAIN3, 0x16 },
{DVBT_VTOP1, 0x35 },
{DVBT_VTOP2, 0x21 },
{DVBT_VTOP3, 0x21 },
{DVBT_KRF1, 0x0 },
{DVBT_KRF2, 0x40 },
{DVBT_KRF3, 0x10 },
{DVBT_KRF4, 0x10 },
{DVBT_IF_AGC_MIN, 0x80 },
{DVBT_IF_AGC_MAX, 0x7f },
{DVBT_RF_AGC_MIN, 0x80 },
{DVBT_RF_AGC_MAX, 0x7f },
{DVBT_POLAR_RF_AGC, 0x0 },
{DVBT_POLAR_IF_AGC, 0x0 },
{DVBT_AD7_SETTING, 0xe9bf },
{DVBT_EN_GI_PGA, 0x0 },
{DVBT_THD_LOCK_UP, 0x0 },
{DVBT_THD_LOCK_DW, 0x0 },
{DVBT_THD_UP1, 0x11 },
{DVBT_THD_DW1, 0xef },
{DVBT_INTER_CNT_LEN, 0xc },
{DVBT_GI_PGA_STATE, 0x0 },
{DVBT_EN_AGC_PGA, 0x1 },
// {DVBT_REG_GPE, 0x1 },
// {DVBT_REG_GPO, 0x0 },
// {DVBT_REG_MONSEL, 0x0 },
// {DVBT_REG_MON, 0x3 },
// {DVBT_REG_4MSEL, 0x0 },
};
TUNER_MODULE *pTuner;
DVBT_DEMOD_MODULE *pDemod;
int i;
int RegBitName;
unsigned long Value;
// Get tuner module and demod module.
pTuner = pNim->pTuner;
pDemod = pNim->pDemod;
// Enable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize tuner.
if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set FC0013 up-dowm AGC.
//(0xFE for master of dual).
//(0xFC for slave of dual, and for 2832 mini dongle).
if(fc0013_SetRegMaskBits(pTuner, 0x0c, 7, 0, 0xFC) != FC0013_I2C_SUCCESS)
goto error_status_set_tuner_registers;
// Disable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize demod.
if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod IF frequency with 0 Hz.
if(pDemod->SetIfFreqHz(pDemod, IF_FREQ_0HZ) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod spectrum mode with SPECTRUM_NORMAL.
if(pDemod->SetSpectrumMode(pDemod, SPECTRUM_NORMAL) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod registers.
for(i = 0; i < RTL2832_FC0013_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
{
// Get register bit name and its value.
RegBitName = AdditionalInitRegValueTable[i].RegBitName;
Value = AdditionalInitRegValueTable[i].Value;
// Set demod registers
if(pDemod->SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
goto error_status_set_registers;
}
// Reset demod by software reset.
if(pDemod->SoftwareReset(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Enable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Get tuner RSSI value when calibration is on.
// Note: Need to execute rtl2832_fc0013_GetTunerRssiCalOn() after demod AD7 is on.
if(rtl2832_fc0013_GetTunerRssiCalOn(pNim) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Disable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
goto error_status_set_registers;
return FUNCTION_SUCCESS;
error_status_execute_function:
error_status_set_registers:
error_status_set_tuner_registers:
return FUNCTION_ERROR;
}
/**
@see DVBT_NIM_FP_INITIALIZE
*/
int
rtl2832_max3543_Initialize(
DVBT_NIM_MODULE *pNim
)
{
typedef struct
{
int RegBitName;
unsigned long Value;
}
REG_VALUE_ENTRY;
static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2832_MAX3543_ADDITIONAL_INIT_REG_TABLE_LEN] =
{
// RegBitName, Value
{DVBT_DAGC_TRG_VAL, 0x39 },
{DVBT_AGC_TARG_VAL_0, 0x0 },
{DVBT_AGC_TARG_VAL_8_1, 0x4b },
{DVBT_AAGC_LOOP_GAIN, 0x16 },
{DVBT_LOOP_GAIN2_3_0, 0x6 },
{DVBT_LOOP_GAIN2_4, 0x1 },
{DVBT_LOOP_GAIN3, 0x16 },
{DVBT_VTOP1, 0x35 },
{DVBT_VTOP2, 0x21 },
{DVBT_VTOP3, 0x21 },
{DVBT_KRF1, 0x0 },
{DVBT_KRF2, 0x40 },
{DVBT_KRF3, 0x10 },
{DVBT_KRF4, 0x10 },
{DVBT_IF_AGC_MIN, 0x80 },
{DVBT_IF_AGC_MAX, 0x7f },
{DVBT_RF_AGC_MIN, 0x80 },
{DVBT_RF_AGC_MAX, 0x7f },
{DVBT_POLAR_RF_AGC, 0x0 },
{DVBT_POLAR_IF_AGC, 0x0 },
{DVBT_AD7_SETTING, 0xe9d4 },
{DVBT_AD_EN_REG1, 0x0 },
{DVBT_CKOUT_PWR_PID, 0x0 },
};
TUNER_MODULE *pTuner;
DVBT_DEMOD_MODULE *pDemod;
int i;
int RegBitName;
unsigned long Value;
// Get tuner module and demod module.
pTuner = pNim->pTuner;
pDemod = pNim->pDemod;
// Enable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize tuner.
if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Disable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize demod.
if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod IF frequency with NIM default.
if(pDemod->SetIfFreqHz(pDemod, RTL2832_MAX3543_IF_FREQ_HZ_DEFAULT) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod spectrum mode with NIM default.
if(pDemod->SetSpectrumMode(pDemod, RTL2832_MAX3543_SPECTRUM_MODE_DEFAULT) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod registers.
for(i = 0; i < RTL2832_MAX3543_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
{
// Get register bit name and its value.
RegBitName = AdditionalInitRegValueTable[i].RegBitName;
Value = AdditionalInitRegValueTable[i].Value;
// Set demod registers
if(pDemod->SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
goto error_status_set_registers;
}
return FUNCTION_SUCCESS;
error_status_execute_function:
error_status_set_registers:
return FUNCTION_ERROR;
}
/**
@see DVBT_NIM_FP_SET_PARAMETERS
*/
int
rtl2832_r820t_SetParameters(
DVBT_NIM_MODULE *pNim,
unsigned long RfFreqHz,
int BandwidthMode
)
{
TUNER_MODULE *pTuner;
DVBT_DEMOD_MODULE *pDemod;
R820T_EXTRA_MODULE *pTunerExtra;
int TunerStandardMode;
unsigned long IfFreqHz;
// Get tuner module and demod module.
pTuner = pNim->pTuner;
pDemod = pNim->pDemod;
// Get tuner extra module.
pTunerExtra = &(pTuner->Extra.R820t);
// Enable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Determine TunerBandwidthMode according to bandwidth mode.
switch(BandwidthMode)
{
default:
case DVBT_BANDWIDTH_6MHZ:
TunerStandardMode = R820T_DVBT_BANDWIDTH_6000000HZ;
IfFreqHz = IF_FREQ_3570000HZ;
break;
case DVBT_BANDWIDTH_7MHZ:
TunerStandardMode = R820T_DVBT_BANDWIDTH_7000000HZ;
IfFreqHz = IF_FREQ_4570000HZ;
break;
case DVBT_BANDWIDTH_8MHZ:
TunerStandardMode = R820T_DVBT_BANDWIDTH_8000000HZ;
IfFreqHz = IF_FREQ_4570000HZ;
break;
}
// Set tuner bandwidth mode with TunerBandwidthMode.
if(pTunerExtra->SetStandardMode(pTuner, TunerStandardMode) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set tuner RF frequency in Hz.
if(pTuner->SetRfFreqHz(pTuner, RfFreqHz) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Disable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Set demod IF frequency.
if(pDemod->SetIfFreqHz(pDemod, IfFreqHz) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod bandwidth mode.
if(pDemod->SetBandwidthMode(pDemod, BandwidthMode) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Reset demod particular registers.
if(pDemod->ResetFunction(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Reset demod by software reset.
if(pDemod->SoftwareReset(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
return FUNCTION_SUCCESS;
error_status_execute_function:
error_status_set_registers:
return FUNCTION_ERROR;
}
