void FoursquareModel::getAdditionalItems( const GeoDataLatLonAltBox& box, qint32 number )
{
if( marbleModel()->planetId() != "earth" ) {
return;
}
QString clientId = "YPRWSYFW1RVL4PJQ2XS5G14RTOGTHOKZVHC1EP5KCCCYQPZF";
QString clientSecret = "5L2JDCAYQCEJWY5FNDU4A1RWATE4E5FIIXXRM41YBTFSERUH";
QString apiUrl( "https://api.foursquare.com/v2/venues/search" );
qreal const distanceLon = marbleModel()->planetRadius() * distanceSphere( box.west(), box.north(), box.east(), box.north() );
qreal const distanceLat = marbleModel()->planetRadius() * distanceSphere( box.west(), box.north(), box.west(), box.south() );
qreal const area = distanceLon * distanceLat;
if ( area > 10 * 1000 * KM2METER * KM2METER ) {
// Large area (> 10.000 km^2) => too large for bbox queries
apiUrl += "?ll=" + QString::number( box.center().latitude(Marble::GeoDataCoordinates::Degree) );
apiUrl += ',' + QString::number( box.center().longitude(Marble::GeoDataCoordinates::Degree) );
apiUrl += "&intent=checkin";
} else {
apiUrl += "?ne=" + QString::number( box.north(Marble::GeoDataCoordinates::Degree) );
apiUrl += ',' + QString::number( box.east(Marble::GeoDataCoordinates::Degree) );
apiUrl += "&sw=" + QString::number( box.south(Marble::GeoDataCoordinates::Degree) );
apiUrl += ',' + QString::number( box.west(Marble::GeoDataCoordinates::Degree) );
apiUrl += "&intent=browse";
}
apiUrl += "&limit=" + QString::number( number );
apiUrl += "&client_id=" + clientId;
apiUrl += "&client_secret=" + clientSecret;
apiUrl += "&v=20120601";
downloadDescriptionFile( QUrl( apiUrl ) );
}
void GeoNamesWeatherService::getAdditionalItems( const GeoDataLatLonAltBox& box,
qint32 number )
{
if( marbleModel()->planetId() != "earth" ) {
return;
}
QUrl geonamesUrl( "http://ws.geonames.org/weatherJSON" );
#if QT_VERSION < 0x050000
geonamesUrl.addQueryItem( "north", QString::number( box.north( GeoDataCoordinates::Degree ) ) );
geonamesUrl.addQueryItem( "south", QString::number( box.south( GeoDataCoordinates::Degree ) ) );
geonamesUrl.addQueryItem( "east", QString::number( box.east( GeoDataCoordinates::Degree ) ) );
geonamesUrl.addQueryItem( "west", QString::number( box.west( GeoDataCoordinates::Degree ) ) );
geonamesUrl.addQueryItem( "maxRows", QString::number( number ) );
geonamesUrl.addQueryItem( "username", "marble" );
#else
QUrlQuery urlQuery;
urlQuery.addQueryItem( "north", QString::number( box.north( GeoDataCoordinates::Degree ) ) );
urlQuery.addQueryItem( "south", QString::number( box.south( GeoDataCoordinates::Degree ) ) );
urlQuery.addQueryItem( "east", QString::number( box.east( GeoDataCoordinates::Degree ) ) );
urlQuery.addQueryItem( "west", QString::number( box.west( GeoDataCoordinates::Degree ) ) );
urlQuery.addQueryItem( "maxRows", QString::number( number ) );
urlQuery.addQueryItem( "username", "marble" );
geonamesUrl.setQuery( urlQuery );
#endif
emit downloadDescriptionFileRequested( geonamesUrl );
}
void GeoDataLatLonAltBoxTest::fromLineStringTest()
{
qreal west = randomLon();
qreal east = randomLon();
qreal lat1 = randomLat();
qreal lat2 = randomLat();
GeoDataLatLonAltBox sourceBox;
if ( lat1 >= lat2 ) {
sourceBox = GeoDataLatLonBox( lat1, lat2, east, west, GeoDataCoordinates::Degree );
}
else {
sourceBox = GeoDataLatLonBox( lat2, lat1, east, west, GeoDataCoordinates::Degree );
}
GeoDataLinearRing ring;
// SouthWest
ring << GeoDataCoordinates( sourceBox.west(), sourceBox.south() );
// SouthEast
ring << GeoDataCoordinates( sourceBox.east(), sourceBox.south() );
// NorthEast
ring << GeoDataCoordinates( sourceBox.east(), sourceBox.north() );
// NorthWest
ring << GeoDataCoordinates( sourceBox.west(), sourceBox.north() );
QCOMPARE( GeoDataLatLonAltBox::fromLineString( ring ).toString(), sourceBox.toString() );
}
void PhotoPluginModel::getAdditionalItems( const GeoDataLatLonAltBox& box,
qint32 number )
{
// Flickr only supports images for earth
if (marbleModel()->planetId() != QLatin1String("earth")) {
return;
}
if( box.west() <= box.east() ) {
const QString bbox =
QString::number(box.west() * RAD2DEG) + QLatin1Char(',') +
QString::number(box.south() * RAD2DEG) + QLatin1Char(',') +
QString::number(box.east() * RAD2DEG) + QLatin1Char(',') +
QString::number(box.north() * RAD2DEG);
QHash<QString,QString> options;
options.insert( "per_page", QString::number( number ) );
options.insert( "bbox", bbox );
options.insert( "sort", "interestingness-desc" );
options.insert( "license", m_licenses );
downloadDescriptionFile( generateUrl( "flickr", "flickr.photos.search", options ) );
}
else {
// Flickr api doesn't support bboxes with west > east so we have to split in two boxes
const QString bboxWest =
QString::number(box.west() * RAD2DEG) + QLatin1Char(',') +
QString::number(box.south() * RAD2DEG) + QLatin1Char(',') +
QString::number(180 ) + QLatin1Char(',') +
QString::number(box.north() * RAD2DEG);
QHash<QString,QString> optionsWest;
optionsWest.insert( "per_page", QString::number( number/2 ) );
optionsWest.insert( "bbox", bboxWest );
optionsWest.insert( "sort", "interestingness-desc" );
optionsWest.insert( "license", m_licenses );
downloadDescriptionFile( generateUrl( "flickr", "flickr.photos.search", optionsWest ) );
const QString bboxEast =
QString::number(-180) +QLatin1Char( ',') +
QString::number(box.south() * RAD2DEG) + QLatin1Char(',') +
QString::number(box.east() * RAD2DEG) + QLatin1Char(',') +
QString::number(box.north() * RAD2DEG);
QHash<QString,QString> optionsEast;
optionsEast.insert( "per_page", QString::number( number/2 ) );
optionsEast.insert( "bbox", bboxEast );
optionsEast.insert( "sort", "interestingness-desc" );
optionsEast.insert( "license", m_licenses );
downloadDescriptionFile( generateUrl( "flickr", "flickr.photos.search", optionsEast ) );
}
}
void OsmNominatimRunner::search( const QString &searchTerm, const GeoDataLatLonAltBox &preferred )
{
QString base = "http://nominatim.openstreetmap.org/search?";
QString query = "q=%1&format=xml&addressdetails=1&accept-language=%2";
QString url = QString(base + query).arg(searchTerm).arg(MarbleLocale::languageCode());
if( !preferred.isEmpty() ) {
GeoDataCoordinates::Unit deg = GeoDataCoordinates::Degree;
QString viewbox( "&viewbox=%1,%2,%3,%4&bounded=1" ); // left, top, right, bottom
url += viewbox.arg(preferred.west(deg))
.arg(preferred.north(deg))
.arg(preferred.east(deg))
.arg(preferred.south(deg));
}
m_request.setUrl(QUrl(url));
m_request.setRawHeader("User-Agent", TinyWebBrowser::userAgent("Browser", "OsmNominatimRunner") );
QEventLoop eventLoop;
QTimer timer;
timer.setSingleShot( true );
timer.setInterval( 15000 );
connect( &timer, SIGNAL(timeout()),
&eventLoop, SLOT(quit()));
connect( this, SIGNAL(searchFinished(QVector<GeoDataPlacemark*>)),
&eventLoop, SLOT(quit()) );
// @todo FIXME Must currently be done in the main thread, see bug 257376
QTimer::singleShot( 0, this, SLOT(startSearch()) );
timer.start();
eventLoop.exec();
}
void OpenCachingComModel::getAdditionalItems( const GeoDataLatLonAltBox& box, qint32 number )
{
if( marbleModel()->planetId() != "earth" )
{
return;
}
if ( m_previousbox.contains( box ) )
{
return;
}
QString url("http://www.opencaching.com/api/geocache/?Authorization=");
url += AUTHKEY + QString("&bbox=%1,%2,%3,%4")
.arg( box.south( GeoDataCoordinates::Degree ) )
.arg( box.west(GeoDataCoordinates::Degree ) )
.arg( box.north(GeoDataCoordinates::Degree ) )
.arg( box.east(GeoDataCoordinates::Degree ) );
if(!m_previousbox.isNull())
{
url += QString("&exclude_bbox=%1,%2,%3,%4")
.arg( m_previousbox.south( GeoDataCoordinates::Degree ) )
.arg( m_previousbox.west(GeoDataCoordinates::Degree ) )
.arg( m_previousbox.north(GeoDataCoordinates::Degree ) )
.arg( m_previousbox.east(GeoDataCoordinates::Degree ) );
}
url += "&limit=" + QString::number( number );
// TODO Limit to user set tags/types/difficulty - when there is a config dialog...
m_previousbox = box;
// qDebug()<<"Fetching more caches: "<<url;
downloadDescriptionFile( QUrl( url ) );
}
void TestGeoDataLatLonAltBox::testFromLineString() {
QFETCH(GeoDataLineString, string);
QFETCH(GeoDataLatLonBox, expected);
GeoDataLatLonAltBox const result = GeoDataLatLonAltBox::fromLineString(string);
QCOMPARE(result.north(), expected.north());
QCOMPARE(result.south(), expected.south());
QCOMPARE(result.east(), expected.east());
QCOMPARE(result.west(), expected.west());
}
QVector<TileCoordsPyramid> DownloadRegion::region( const TextureLayer *textureLayer, const GeoDataLatLonAltBox &downloadRegion ) const
{
Q_ASSERT( textureLayer );
int const westX = d->rad2PixelX( downloadRegion.west(), textureLayer );
int const northY = d->rad2PixelY( downloadRegion.north(), textureLayer );
int const eastX = d->rad2PixelX( downloadRegion.east(), textureLayer );
int const southY = d->rad2PixelY( downloadRegion.south(), textureLayer );
// FIXME: remove this stuff
mDebug() << "DownloadRegionDialog downloadRegion:"
<< "north:" << downloadRegion.north()
<< "south:" << downloadRegion.south()
<< "east:" << downloadRegion.east()
<< "west:" << downloadRegion.west();
mDebug() << "north/west (x/y):" << westX << northY;
mDebug() << "south/east (x/y):" << eastX << southY;
int const tileWidth = textureLayer->tileSize().width();
int const tileHeight = textureLayer->tileSize().height();
mDebug() << "DownloadRegionDialog downloadRegion: tileSize:" << tileWidth << tileHeight;
int const visibleLevelX1 = qMin( westX, eastX );
int const visibleLevelY1 = qMin( northY, southY );
int const visibleLevelX2 = qMax( westX, eastX );
int const visibleLevelY2 = qMax( northY, southY );
mDebug() << "visible level pixel coords (level/x1/y1/x2/y2):" << d->m_visibleTileLevel
<< visibleLevelX1 << visibleLevelY1 << visibleLevelX2 << visibleLevelY2;
int bottomLevelX1, bottomLevelY1, bottomLevelX2, bottomLevelY2;
// the pixel coords calculated above are referring to the visible tile level,
// if the bottom level is a different level, we have to take it into account
if ( d->m_visibleTileLevel > d->m_tileLevelRange.second ) {
int const deltaLevel = d->m_visibleTileLevel - d->m_tileLevelRange.second;
bottomLevelX1 = visibleLevelX1 >> deltaLevel;
bottomLevelY1 = visibleLevelY1 >> deltaLevel;
bottomLevelX2 = visibleLevelX2 >> deltaLevel;
bottomLevelY2 = visibleLevelY2 >> deltaLevel;
}
void TestGeoDataLatLonAltBox::testPack() {
QFETCH(GeoDataCoordinates, coordinates);
GeoDataLatLonAltBox const original = GeoDataLatLonAltBox(coordinates);
QBuffer buffer;
bool const isOpenForWriting = buffer.open(QBuffer::WriteOnly);
QVERIFY(isOpenForWriting);
QDataStream out(&buffer);
original.pack(out);
buffer.close();
bool const isOpenForReading = buffer.open(QBuffer::ReadOnly);
QVERIFY(isOpenForReading);
QDataStream in(&buffer);
GeoDataLatLonAltBox unpacked;
unpacked.unpack(in);
buffer.close();
#if 0
QCOMPARE(unpacked.north(), original.north());
QCOMPARE(unpacked.south(), original.south());
QCOMPARE(unpacked.east(), original.east());
QCOMPARE(unpacked.west(), original.west());
#endif
QCOMPARE(unpacked.maxAltitude(), original.maxAltitude());
QCOMPARE(unpacked.minAltitude(), original.minAltitude());
QCOMPARE(unpacked.altitudeMode(), original.altitudeMode());
}
void GeoNamesWeatherService::getAdditionalItems( const GeoDataLatLonAltBox& box,
const MarbleModel *model,
qint32 number )
{
if( model->planetId() != "earth" ) {
return;
}
QUrl geonamesUrl( "http://ws.geonames.org/weatherJSON" );
geonamesUrl.addQueryItem( "north", QString::number( box.north( GeoDataCoordinates::Degree ) ) );
geonamesUrl.addQueryItem( "south", QString::number( box.south( GeoDataCoordinates::Degree ) ) );
geonamesUrl.addQueryItem( "east", QString::number( box.east( GeoDataCoordinates::Degree ) ) );
geonamesUrl.addQueryItem( "west", QString::number( box.west( GeoDataCoordinates::Degree ) ) );
geonamesUrl.addQueryItem( "maxRows", QString::number( number ) );
emit downloadDescriptionFileRequested( geonamesUrl );
}
void EarthquakeModel::getAdditionalItems( const GeoDataLatLonAltBox& box, qint32 number )
{
if (marbleModel()->planetId() != QLatin1String("earth")) {
return;
}
const QString geonamesUrl( QLatin1String("http://ws.geonames.org/earthquakesJSON") +
QLatin1String("?north=") + QString::number(box.north() * RAD2DEG) +
QLatin1String("&south=") + QString::number(box.south() * RAD2DEG) +
QLatin1String("&east=") + QString::number(box.east() * RAD2DEG) +
QLatin1String("&west=") + QString::number(box.west() * RAD2DEG) +
QLatin1String("&date=") + m_endDate.toString("yyyy-MM-dd") +
QLatin1String("&maxRows=") + QString::number(number) +
QLatin1String("&username=marble") +
QLatin1String("&formatted=true"));
downloadDescriptionFile( QUrl( geonamesUrl ) );
}
void TestGeoDataLatLonAltBox::testDefaultConstruction()
{
GeoDataLatLonBox const latLonBox;
QCOMPARE( latLonBox.north(), 0.0 );
QCOMPARE( latLonBox.south(), 0.0 );
QCOMPARE( latLonBox.east(), 0.0 );
QCOMPARE( latLonBox.west(), 0.0 );
QCOMPARE( latLonBox.rotation(), 0.0 );
QCOMPARE( latLonBox.width(), 0.0 );
QCOMPARE( latLonBox.height(), 0.0 );
QVERIFY( !latLonBox.crossesDateLine() );
QCOMPARE( latLonBox.center(), GeoDataCoordinates( 0, 0 ) );
QVERIFY( latLonBox.isNull() );
QVERIFY( latLonBox.isEmpty() );
QVERIFY( (latLonBox|latLonBox).isNull() );
QVERIFY( (latLonBox|latLonBox).isEmpty() );
QVERIFY( !latLonBox.intersects( latLonBox ) );
GeoDataLatLonAltBox const latLonAltBox;
QCOMPARE( latLonAltBox.north(), 0.0 );
QCOMPARE( latLonAltBox.south(), 0.0 );
QCOMPARE( latLonAltBox.east(), 0.0 );
QCOMPARE( latLonAltBox.west(), 0.0 );
QCOMPARE( latLonAltBox.rotation(), 0.0 );
QCOMPARE( latLonAltBox.width(), 0.0 );
QCOMPARE( latLonAltBox.height(), 0.0 );
QVERIFY( !latLonAltBox.crossesDateLine() );
QCOMPARE( latLonAltBox.center(), GeoDataCoordinates( 0, 0, 0 ) );
QVERIFY( latLonAltBox.isNull() );
QVERIFY( latLonAltBox.isEmpty() );
QCOMPARE( latLonAltBox.minAltitude(), 0.0 );
QCOMPARE( latLonAltBox.maxAltitude(), 0.0 );
QCOMPARE( latLonAltBox.altitudeMode(), ClampToGround );
QVERIFY( (latLonAltBox|latLonAltBox).isNull() );
QVERIFY( (latLonAltBox|latLonAltBox).isEmpty() );
QVERIFY( !latLonAltBox.intersects( latLonAltBox ) );
}
void WikipediaModel::getAdditionalItems( const GeoDataLatLonAltBox& box,
qint32 number )
{
// Geonames only supports wikipedia articles for earth
if (marbleModel()->planetId() != QLatin1String("earth")) {
return;
}
QUrl geonamesUrl( "http://ws.geonames.org/wikipediaBoundingBox" );
QUrlQuery urlQuery;
urlQuery.addQueryItem( "north", QString::number( box.north( GeoDataCoordinates::Degree ) ) );
urlQuery.addQueryItem( "south", QString::number( box.south( GeoDataCoordinates::Degree ) ) );
urlQuery.addQueryItem( "east", QString::number( box.east( GeoDataCoordinates::Degree ) ) );
urlQuery.addQueryItem( "west", QString::number( box.west( GeoDataCoordinates::Degree ) ) );
urlQuery.addQueryItem( "maxRows", QString::number( number ) );
urlQuery.addQueryItem( "lang", m_languageCode );
urlQuery.addQueryItem( "username", "marble" );
geonamesUrl.setQuery( urlQuery );
downloadDescriptionFile( geonamesUrl );
}
void PanoramioModel::getAdditionalItems( const GeoDataLatLonAltBox &box, qint32 number )
{
if ( marbleModel()->planetId() != "earth" ) {
return;
}
// FIXME: Download a list of constant number, because the parser doesn't support
// loading a file of an unknown length.
QUrl jsonUrl( "http://www.panoramio.com/map/get_panoramas.php?from="
+ QString::number( 0 )
+ "&order=upload_date"
+ "&set=public"
+ "&to=" + QString::number( number )
// + "&to=" + QString::number( number )
+ "&minx=" + QString::number( box.west() * RAD2DEG )
+ "&miny=" + QString::number( box.south() * RAD2DEG )
+ "&maxx=" + QString::number( box.east() * RAD2DEG )
+ "&maxy=" + QString::number( box.north() * RAD2DEG )
+ "&size=small");
downloadDescriptionFile( jsonUrl );
}
void TestGeoDataLatLonAltBox::testContainerBox() {
QFETCH(qreal, lon1);
QFETCH(qreal, lat1);
QFETCH(qreal, lon2);
QFETCH(qreal, lat2);
QFETCH(qreal, lon3);
QFETCH(qreal, lat3);
GeoDataPlacemark p1, p2, p3;
p1.setCoordinate(lon1, lat1, GeoDataCoordinates::Degree);
p2.setCoordinate(lon2, lat2, GeoDataCoordinates::Degree);
p3.setCoordinate(lon3, lat3, GeoDataCoordinates::Degree);
GeoDataFolder f1, f2;
f1.append(new GeoDataPlacemark(p1));
f2.append(new GeoDataPlacemark(p2));
f2.append(new GeoDataPlacemark(p3));
f1.append(new GeoDataFolder(f2));
GeoDataLatLonAltBox box = f1.latLonAltBox();
QCOMPARE(box.north(), qMax(qMax(lat1, lat2), lat3));
QCOMPARE(box.east(), qMax(qMax(lon1, lon2), lon3));
QCOMPARE(box.south(), qMin(qMin(lat1, lat2), lat3));
QCOMPARE(box.west(), qMin(qMin(lon1, lon2), lon3));
}
