uint32_t GrPathUtils::generateCubicPoints(const GrPoint& p0,
const GrPoint& p1,
const GrPoint& p2,
const GrPoint& p3,
GrScalar tolSqd,
GrPoint** points,
uint32_t pointsLeft) {
if (pointsLeft < 2 ||
(p1.distanceToLineSegmentBetweenSqd(p0, p3) < tolSqd &&
p2.distanceToLineSegmentBetweenSqd(p0, p3) < tolSqd)) {
(*points)[0] = p3;
*points += 1;
return 1;
}
GrPoint q[] = {
{ GrScalarAve(p0.fX, p1.fX), GrScalarAve(p0.fY, p1.fY) },
{ GrScalarAve(p1.fX, p2.fX), GrScalarAve(p1.fY, p2.fY) },
{ GrScalarAve(p2.fX, p3.fX), GrScalarAve(p2.fY, p3.fY) }
};
GrPoint r[] = {
{ GrScalarAve(q[0].fX, q[1].fX), GrScalarAve(q[0].fY, q[1].fY) },
{ GrScalarAve(q[1].fX, q[2].fX), GrScalarAve(q[1].fY, q[2].fY) }
};
GrPoint s = { GrScalarAve(r[0].fX, r[1].fX), GrScalarAve(r[0].fY, r[1].fY) };
pointsLeft >>= 1;
uint32_t a = generateCubicPoints(p0, q[0], r[0], s, tolSqd, points, pointsLeft);
uint32_t b = generateCubicPoints(s, r[1], q[2], p3, tolSqd, points, pointsLeft);
return a + b;
}
// This method fills int the four vertices for drawing 'rect'.
// matrix - is applied to each vertex
// srcRects - provide the uvs for each vertex
// srcMatrices - are applied to the corresponding 'srcRect'
// color - vertex color (replicated in each vertex)
// layout - specifies which uvs and/or color are present
// vertices - storage for the resulting vertices
// Note: the color parameter will only be used when kColor_VertexLayoutBit
// is present in 'layout'
void GrDrawTarget::SetRectVertices(const GrRect& rect,
const SkMatrix* matrix,
const GrRect* srcRects[],
const SkMatrix* srcMatrices[],
GrColor color,
GrVertexLayout layout,
void* vertices) {
#if GR_DEBUG
// check that the layout and srcRects agree
for (int i = 0; i < GrDrawState::kNumStages; ++i) {
if (VertexTexCoordsForStage(i, layout) >= 0) {
GR_DEBUGASSERT(NULL != srcRects && NULL != srcRects[i]);
} else {
GR_DEBUGASSERT(NULL == srcRects || NULL == srcRects[i]);
}
}
#endif
int stageOffsets[GrDrawState::kNumStages], colorOffset;
int vsize = VertexSizeAndOffsetsByStage(layout, stageOffsets,
&colorOffset, NULL, NULL);
GrTCast<GrPoint*>(vertices)->setRectFan(rect.fLeft, rect.fTop,
rect.fRight, rect.fBottom,
vsize);
if (NULL != matrix) {
matrix->mapPointsWithStride(GrTCast<GrPoint*>(vertices), vsize, 4);
}
for (int i = 0; i < GrDrawState::kNumStages; ++i) {
if (stageOffsets[i] > 0) {
GrPoint* coords = GrTCast<GrPoint*>(GrTCast<intptr_t>(vertices) +
stageOffsets[i]);
coords->setRectFan(srcRects[i]->fLeft, srcRects[i]->fTop,
srcRects[i]->fRight, srcRects[i]->fBottom,
vsize);
if (NULL != srcMatrices && NULL != srcMatrices[i]) {
srcMatrices[i]->mapPointsWithStride(coords, vsize, 4);
}
}
}
if (layout & kColor_VertexLayoutBit) {
GrColor* vertCol = GrTCast<GrColor*>(GrTCast<intptr_t>(vertices) + colorOffset);
for (int i = 0; i < 4; ++i) {
*vertCol = color;
vertCol = (GrColor*) ((intptr_t) vertCol + vsize);
}
}
}
static void update_degenerate_test(DegenerateTestData* data, const GrPoint& pt) {
switch (data->fStage) {
case DegenerateTestData::kInitial:
data->fFirstPoint = pt;
data->fStage = DegenerateTestData::kPoint;
break;
case DegenerateTestData::kPoint:
if (pt.distanceToSqd(data->fFirstPoint) > kCloseSqd) {
data->fLineNormal = pt - data->fFirstPoint;
data->fLineNormal.normalize();
data->fLineNormal.setOrthog(data->fLineNormal);
data->fLineC = -data->fLineNormal.dot(data->fFirstPoint);
data->fStage = DegenerateTestData::kLine;
}
break;
case DegenerateTestData::kLine:
if (SkScalarAbs(data->fLineNormal.dot(pt) + data->fLineC) > kClose) {
data->fStage = DegenerateTestData::kNonDegenerate;
}
case DegenerateTestData::kNonDegenerate:
break;
default:
GrCrash("Unexpected degenerate test stage.");
}
}
void GrDrawTarget::onDrawRect(const SkRect& rect,
const SkMatrix* matrix,
const SkRect* localRect,
const SkMatrix* localMatrix) {
GrDrawState::AutoViewMatrixRestore avmr;
if (NULL != matrix) {
avmr.set(this->drawState(), *matrix);
}
set_vertex_attributes(this->drawState(), NULL != localRect);
AutoReleaseGeometry geo(this, 4, 0);
if (!geo.succeeded()) {
GrPrintf("Failed to get space for vertices!\n");
return;
}
size_t vsize = this->drawState()->getVertexSize();
geo.positions()->setRectFan(rect.fLeft, rect.fTop, rect.fRight, rect.fBottom, vsize);
if (NULL != localRect) {
GrPoint* coords = GrTCast<GrPoint*>(GrTCast<intptr_t>(geo.vertices()) +
sizeof(GrPoint));
coords->setRectFan(localRect->fLeft, localRect->fTop,
localRect->fRight, localRect->fBottom,
vsize);
if (NULL != localMatrix) {
localMatrix->mapPointsWithStride(coords, vsize, 4);
}
}
SkTLazy<SkRect> bounds;
if (this->getDrawState().willEffectReadDstColor()) {
bounds.init();
this->getDrawState().getViewMatrix().mapRect(bounds.get(), rect);
}
this->drawNonIndexed(kTriangleFan_GrPrimitiveType, 0, 4, bounds.getMaybeNull());
}
uint32_t GrPathUtils::generateQuadraticPoints(const GrPoint& p0,
const GrPoint& p1,
const GrPoint& p2,
GrScalar tolSqd,
GrPoint** points,
uint32_t pointsLeft) {
if (pointsLeft < 2 ||
(p1.distanceToLineSegmentBetweenSqd(p0, p2)) < tolSqd) {
(*points)[0] = p2;
*points += 1;
return 1;
}
GrPoint q[] = {
{ GrScalarAve(p0.fX, p1.fX), GrScalarAve(p0.fY, p1.fY) },
{ GrScalarAve(p1.fX, p2.fX), GrScalarAve(p1.fY, p2.fY) },
};
GrPoint r = { GrScalarAve(q[0].fX, q[1].fX), GrScalarAve(q[0].fY, q[1].fY) };
pointsLeft >>= 1;
uint32_t a = generateQuadraticPoints(p0, q[0], r, tolSqd, points, pointsLeft);
uint32_t b = generateQuadraticPoints(r, q[1], p2, tolSqd, points, pointsLeft);
return a + b;
}
void GrInOrderDrawBuffer::onDrawRect(const GrRect& rect,
const SkMatrix* matrix,
const GrRect* localRect,
const SkMatrix* localMatrix) {
GrDrawState::AutoColorRestore acr;
GrDrawState* drawState = this->drawState();
GrColor color = drawState->getColor();
int colorOffset, localOffset;
set_vertex_attributes(drawState,
this->caps()->dualSourceBlendingSupport() || drawState->hasSolidCoverage(),
NULL != localRect,
&colorOffset, &localOffset);
if (colorOffset >= 0) {
// We set the draw state's color to white here. This is done so that any batching performed
// in our subclass's onDraw() won't get a false from GrDrawState::op== due to a color
// mismatch. TODO: Once vertex layout is owned by GrDrawState it should skip comparing the
// constant color in its op== when the kColor layout bit is set and then we can remove
// this.
acr.set(drawState, 0xFFFFFFFF);
}
AutoReleaseGeometry geo(this, 4, 0);
if (!geo.succeeded()) {
GrPrintf("Failed to get space for vertices!\n");
return;
}
// Go to device coords to allow batching across matrix changes
SkMatrix combinedMatrix;
if (NULL != matrix) {
combinedMatrix = *matrix;
} else {
combinedMatrix.reset();
}
combinedMatrix.postConcat(drawState->getViewMatrix());
// When the caller has provided an explicit source rect for a stage then we don't want to
// modify that stage's matrix. Otherwise if the effect is generating its source rect from
// the vertex positions then we have to account for the view matrix change.
GrDrawState::AutoViewMatrixRestore avmr;
if (!avmr.setIdentity(drawState)) {
return;
}
size_t vsize = drawState->getVertexSize();
geo.positions()->setRectFan(rect.fLeft, rect.fTop, rect.fRight, rect.fBottom, vsize);
combinedMatrix.mapPointsWithStride(geo.positions(), vsize, 4);
SkRect devBounds;
// since we already computed the dev verts, set the bounds hint. This will help us avoid
// unnecessary clipping in our onDraw().
get_vertex_bounds(geo.vertices(), vsize, 4, &devBounds);
if (localOffset >= 0) {
GrPoint* coords = GrTCast<GrPoint*>(GrTCast<intptr_t>(geo.vertices()) + localOffset);
coords->setRectFan(localRect->fLeft, localRect->fTop,
localRect->fRight, localRect->fBottom,
vsize);
if (NULL != localMatrix) {
localMatrix->mapPointsWithStride(coords, vsize, 4);
}
}
if (colorOffset >= 0) {
GrColor* vertColor = GrTCast<GrColor*>(GrTCast<intptr_t>(geo.vertices()) + colorOffset);
for (int i = 0; i < 4; ++i) {
*vertColor = color;
vertColor = (GrColor*) ((intptr_t) vertColor + vsize);
}
}
this->setIndexSourceToBuffer(this->getContext()->getQuadIndexBuffer());
this->drawIndexedInstances(kTriangles_GrPrimitiveType, 1, 4, 6, &devBounds);
// to ensure that stashing the drawState ptr is valid
GrAssert(this->drawState() == drawState);
}
void GrInOrderDrawBuffer::drawRect(const GrRect& rect,
const SkMatrix* matrix,
const GrRect* srcRects[],
const SkMatrix* srcMatrices[]) {
GrVertexLayout layout = 0;
GrDrawState::AutoColorRestore acr;
GrColor color = this->drawState()->getColor();
// Using per-vertex colors allows batching across colors. (A lot of rects in a row differing
// only in color is a common occurrence in tables). However, having per-vertex colors disables
// blending optimizations because we don't know if the color will be solid or not. These
// optimizations help determine whether coverage and color can be blended correctly when
// dual-source blending isn't available. This comes into play when there is coverage. If colors
// were a stage it could take a hint that every vertex's color will be opaque.
if (this->getCaps().dualSourceBlendingSupport() ||
this->getDrawState().hasSolidCoverage(this->getGeomSrc().fVertexLayout)) {
layout |= GrDrawState::kColor_VertexLayoutBit;;
// We set the draw state's color to white here. This is done so that any batching performed
// in our subclass's onDraw() won't get a false from GrDrawState::op== due to a color
// mismatch. TODO: Once vertex layout is owned by GrDrawState it should skip comparing the
// constant color in its op== when the kColor layout bit is set and then we can remove this.
acr.set(this->drawState(), 0xFFFFFFFF);
}
uint32_t explicitCoordMask = 0;
if (NULL != srcRects) {
for (int s = 0; s < GrDrawState::kNumStages; ++s) {
int numTC = 0;
if (NULL != srcRects[s]) {
layout |= GrDrawState::StageTexCoordVertexLayoutBit(s, numTC);
++numTC;
explicitCoordMask |= (1 << s);
}
}
}
AutoReleaseGeometry geo(this, layout, 4, 0);
if (!geo.succeeded()) {
GrPrintf("Failed to get space for vertices!\n");
return;
}
// Go to device coords to allow batching across matrix changes
SkMatrix combinedMatrix;
if (NULL != matrix) {
combinedMatrix = *matrix;
} else {
combinedMatrix.reset();
}
combinedMatrix.postConcat(this->drawState()->getViewMatrix());
// When the caller has provided an explicit source rects for a stage then we don't want to
// modify that stage's matrix. Otherwise if the effect is generating its source rect from
// the vertex positions then we have to account for the view matrix change.
GrDrawState::AutoDeviceCoordDraw adcd(this->drawState(), explicitCoordMask);
if (!adcd.succeeded()) {
return;
}
int stageOffsets[GrDrawState::kNumStages], colorOffset;
int vsize = GrDrawState::VertexSizeAndOffsetsByStage(layout, stageOffsets,
&colorOffset, NULL, NULL);
geo.positions()->setRectFan(rect.fLeft, rect.fTop, rect.fRight, rect.fBottom, vsize);
combinedMatrix.mapPointsWithStride(geo.positions(), vsize, 4);
SkRect devBounds;
// since we already computed the dev verts, set the bounds hint. This will help us avoid
// unnecessary clipping in our onDraw().
get_vertex_bounds(geo.vertices(), vsize, 4, &devBounds);
for (int i = 0; i < GrDrawState::kNumStages; ++i) {
if (explicitCoordMask & (1 << i)) {
GrAssert(0 != stageOffsets[i]);
GrPoint* coords = GrTCast<GrPoint*>(GrTCast<intptr_t>(geo.vertices()) +
stageOffsets[i]);
coords->setRectFan(srcRects[i]->fLeft, srcRects[i]->fTop,
srcRects[i]->fRight, srcRects[i]->fBottom,
vsize);
if (NULL != srcMatrices && NULL != srcMatrices[i]) {
srcMatrices[i]->mapPointsWithStride(coords, vsize, 4);
}
} else {
GrAssert(0 == stageOffsets[i]);
}
}
if (colorOffset >= 0) {
GrColor* vertColor = GrTCast<GrColor*>(GrTCast<intptr_t>(geo.vertices()) + colorOffset);
for (int i = 0; i < 4; ++i) {
*vertColor = color;
vertColor = (GrColor*) ((intptr_t) vertColor + vsize);
}
}
this->setIndexSourceToBuffer(fGpu->getQuadIndexBuffer());
this->drawIndexedInstances(kTriangles_GrPrimitiveType, 1, 4, 6, &devBounds);
}
