int
Ieee1394Service::resetHandlerLowLevel( raw1394handle_t handle,
unsigned int generation )
{
raw1394_update_generation ( handle, generation );
Ieee1394Service* instance
= (Ieee1394Service*) raw1394_get_userdata( handle );
instance->resetHandler( generation );
return 0;
}
bool
setVolume( Ieee1394Service& ieee1394service, int node_id, int ffb_id, int vol )
{
FunctionBlockCmd fbCmd( ieee1394service,
FunctionBlockCmd::eFBT_Feature,
ffb_id,
FunctionBlockCmd::eCA_Current );
fbCmd.setNodeId( node_id );
fbCmd.setSubunitId( 0x00 );
fbCmd.setCommandType( AVCCommand::eCT_Control );
fbCmd.m_pFBFeature->m_audioChannelNumber = 0;
fbCmd.m_pFBFeature->m_controlSelector=FunctionBlockFeature::eCSE_Feature_Volume;
fbCmd.m_pFBFeature->m_pVolume->m_volume = vol;
fbCmd.setVerbose( bVerbose );
if (bVerbose) {
ieee1394service.setVerboseLevel( DEBUG_LEVEL_VERBOSE );
}
bool bStatus = fbCmd.fire();
if ( !bStatus ) {
printf( "cmd failed\n" );
}
if ( bVerbose ) {
CoutSerializer se;
fbCmd.serialize( se );
}
return bStatus;
}
short int
getVolume( Ieee1394Service& ieee1394service, int node_id, int ffb_id,
FunctionBlockCmd::EControlAttribute control_attrib )
{
FunctionBlockCmd fbCmd( ieee1394service,
FunctionBlockCmd::eFBT_Feature,
ffb_id,
control_attrib );
fbCmd.setNodeId( node_id );
fbCmd.setSubunitId( 0x00 );
fbCmd.setCommandType( AVCCommand::eCT_Status );
fbCmd.m_pFBFeature->m_audioChannelNumber = 0;
fbCmd.m_pFBFeature->m_controlSelector=FunctionBlockFeature::eCSE_Feature_Volume;
fbCmd.m_pFBFeature->m_pVolume->m_volume = 0;
fbCmd.setVerbose( bVerbose );
if (bVerbose) {
ieee1394service.setVerboseLevel( DEBUG_LEVEL_VERBOSE );
}
if ( !fbCmd.fire() ) {
printf( "cmd failed\n" );
}
if ( bVerbose ) {
CoutSerializer se;
fbCmd.serialize( se );
}
return fbCmd.m_pFBFeature->m_pVolume->m_volume;
}
void
DeviceManager::busresetHandler(Ieee1394Service &service)
{
// serialize bus reset handling since it can be that a new one occurs while we're
// doing stuff.
debugOutput( DEBUG_LEVEL_NORMAL, "Bus reset detected on service %p...\n", &service );
Util::MutexLockHelper lock(*m_BusResetLock);
debugOutput( DEBUG_LEVEL_NORMAL, " handling busreset...\n" );
// FIXME: what if the devices are gone? (device should detect this!)
// propagate the bus reset to all avDevices
m_DeviceListLock->Lock(); // make sure nobody is using this
for ( FFADODeviceVectorIterator it = m_avDevices.begin();
it != m_avDevices.end();
++it )
{
if(&service == &((*it)->get1394Service())) {
debugOutput(DEBUG_LEVEL_NORMAL,
"issue busreset on device GUID %s\n",
(*it)->getConfigRom().getGuidString().c_str());
(*it)->handleBusReset();
} else {
debugOutput(DEBUG_LEVEL_NORMAL,
"skipping device GUID %s since not on service %p\n",
(*it)->getConfigRom().getGuidString().c_str(), &service);
}
}
m_DeviceListLock->Unlock();
// now that the devices have been updates, we can request to update the iso streams
if(!service.getIsoHandlerManager().handleBusReset()) {
debugError("IsoHandlerManager failed to handle busreset\n");
}
// notify the streamprocessormanager of the busreset
// if(m_processorManager) {
// m_processorManager->handleBusReset(service);
// } else {
// debugWarning("No valid SPM\n");
// }
// rediscover to find new devices
// (only for the control server ATM, streaming can't dynamically add/remove devices)
if(!discover(m_used_cache_last_time, true)) {
debugError("Could not rediscover devices\n");
}
// notify any clients
signalNotifiers(m_busResetNotifiers);
// display the new state
if(getDebugLevel() >= DEBUG_LEVEL_VERBOSE) {
showDeviceInfo();
}
}
void
printDeviceList()
{
Ieee1394Service service;
// switch off all messages since they mess up the list
service.setVerboseLevel(0);
if ( !service.initialize( args->port ) ) {
cerr << "Could not initialize IEEE 1394 service" << endl;
exit(-1);
}
cout << "Node id GUID Vendor - Model" << endl;
for (int i = 0; i < service.getNodeCount(); i++) {
ConfigRom crom(service, i);
if (!crom.initialize())
break;
cout << i << " "
<< " 0x" << crom.getGuidString()
<< " '" << crom.getVendorName()
<< "' - '" << crom.getModelName() << "'" << endl;
}
}
bool
DeviceManager::discover( bool useCache, bool rediscover )
{
debugOutput( DEBUG_LEVEL_NORMAL, "Starting discovery...\n" );
useCache = useCache && ENABLE_DISCOVERY_CACHE;
m_used_cache_last_time = useCache;
bool slaveMode=false;
if(!getOption("slaveMode", slaveMode)) {
debugWarning("Could not retrieve slaveMode parameter, defauling to false\n");
}
bool snoopMode=false;
if(!getOption("snoopMode", snoopMode)) {
debugWarning("Could not retrieve snoopMode parameter, defauling to false\n");
}
setVerboseLevel(getDebugLevel());
// FIXME: it could be that a 1394service has disappeared (cardbus)
ConfigRomVector configRoms;
// build a list of configroms on the bus.
for ( Ieee1394ServiceVectorIterator it = m_1394Services.begin();
it != m_1394Services.end();
++it )
{
Ieee1394Service *portService = *it;
for ( fb_nodeid_t nodeId = 0;
nodeId < portService->getNodeCount();
++nodeId )
{
debugOutput( DEBUG_LEVEL_VERBOSE, "Probing node %d...\n", nodeId );
if (nodeId == portService->getLocalNodeId()) {
debugOutput( DEBUG_LEVEL_VERBOSE, "Skipping local node (%d)...\n", nodeId );
continue;
}
ConfigRom * configRom = new ConfigRom( *portService, nodeId );
if ( !configRom->initialize() ) {
// \todo If a PHY on the bus is in power safe mode then
// the config rom is missing. So this might be just
// such this case and we can safely skip it. But it might
// be there is a real software problem on our side.
// This should be handlede more carefuly.
debugOutput( DEBUG_LEVEL_NORMAL,
"Could not read config rom from device (node id %d). "
"Skip device discovering for this node\n",
nodeId );
continue;
}
configRoms.push_back(configRom);
}
}
// notify that we are going to manipulate the list
signalNotifiers(m_preUpdateNotifiers);
m_DeviceListLock->Lock(); // make sure nobody starts using the list
if(rediscover) {
FFADODeviceVector discovered_devices_on_bus;
for ( FFADODeviceVectorIterator it = m_avDevices.begin();
it != m_avDevices.end();
++it )
{
bool seen_device = false;
for ( ConfigRomVectorIterator it2 = configRoms.begin();
it2 != configRoms.end();
++it2 )
{
seen_device |= ((*it)->getConfigRom().getGuid() == (*it2)->getGuid());
}
if(seen_device) {
debugOutput( DEBUG_LEVEL_VERBOSE,
"Already discovered device with GUID: %s\n",
(*it)->getConfigRom().getGuidString().c_str() );
// we already discovered this device, and it is still here. keep it
discovered_devices_on_bus.push_back(*it);
} else {
debugOutput( DEBUG_LEVEL_VERBOSE,
"Device with GUID: %s disappeared from bus, removing...\n",
(*it)->getConfigRom().getGuidString().c_str() );
// the device has disappeared, remove it from the control tree
if (!deleteElement(*it)) {
debugWarning("failed to remove Device from Control::Container\n");
}
// delete the device
// FIXME: this will mess up the any code that waits for bus resets to
// occur
delete *it;
}
}
// prune the devices that disappeared
m_avDevices = discovered_devices_on_bus;
} else { // remove everything since we are not rediscovering
for ( FFADODeviceVectorIterator it = m_avDevices.begin();
it != m_avDevices.end();
++it )
{
if (!deleteElement(*it)) {
debugWarning("failed to remove Device from Control::Container\n");
}
delete *it;
}
m_avDevices.clear();
}
// delete the config rom list entries
// FIXME: we should reuse it
for ( ConfigRomVectorIterator it = configRoms.begin();
it != configRoms.end();
++it )
{
delete *it;
}
assert(m_deviceStringParser);
// show the spec strings we're going to use
if(getDebugLevel() >= DEBUG_LEVEL_VERBOSE) {
m_deviceStringParser->show();
}
if (!slaveMode) {
// for the devices that are still in the list check if they require re-discovery
FFADODeviceVector failed_to_rediscover;
for ( FFADODeviceVectorIterator it_dev = m_avDevices.begin();
it_dev != m_avDevices.end();
++it_dev )
{
FFADODevice* avDevice = *it_dev;
if(avDevice->needsRediscovery()) {
debugOutput( DEBUG_LEVEL_NORMAL,
"Device with GUID %s requires rediscovery (state changed)...\n",
avDevice->getConfigRom().getGuidString().c_str());
bool isFromCache = false;
if ( useCache && avDevice->loadFromCache() ) {
debugOutput( DEBUG_LEVEL_VERBOSE, "could load from cache\n" );
isFromCache = true;
// restore the debug level for everything that was loaded
avDevice->setVerboseLevel( getDebugLevel() );
} else if ( avDevice->discover() ) {
debugOutput( DEBUG_LEVEL_VERBOSE, "discovery successful\n" );
} else {
debugError( "could not discover device\n" );
failed_to_rediscover.push_back(avDevice);
continue;
}
if ( !isFromCache && !avDevice->saveCache() ) {
debugOutput( DEBUG_LEVEL_VERBOSE, "No cached version of AVC model created\n" );
}
} else {
debugOutput( DEBUG_LEVEL_NORMAL,
"Device with GUID %s does not require rediscovery...\n",
avDevice->getConfigRom().getGuidString().c_str());
}
}
// remove devices that failed to rediscover
// FIXME: surely there has to be a better way to do this
FFADODeviceVector to_keep;
for ( FFADODeviceVectorIterator it = m_avDevices.begin();
it != m_avDevices.end();
++it )
{
bool keep_this_device = true;
for ( FFADODeviceVectorIterator it2 = failed_to_rediscover.begin();
it2 != failed_to_rediscover.end();
++it2 )
{
if(*it == *it2) {
debugOutput( DEBUG_LEVEL_NORMAL,
"Removing device with GUID %s due to failed discovery...\n",
(*it)->getConfigRom().getGuidString().c_str());
keep_this_device = false;
break;
}
}
if(keep_this_device) {
to_keep.push_back(*it);
}
}
for ( FFADODeviceVectorIterator it2 = failed_to_rediscover.begin();
it2 != failed_to_rediscover.end();
++it2 )
{
if (!deleteElement(*it2)) {
debugWarning("failed to remove Device from Control::Container\n");
}
delete *it2;
}
m_avDevices = to_keep;
// pick up new devices
for ( Ieee1394ServiceVectorIterator it = m_1394Services.begin();
it != m_1394Services.end();
++it )
{
Ieee1394Service *portService = *it;
for ( fb_nodeid_t nodeId = 0;
nodeId < portService->getNodeCount();
++nodeId )
{
debugOutput( DEBUG_LEVEL_VERBOSE, "Probing node %d...\n", nodeId );
if (nodeId == portService->getLocalNodeId()) {
debugOutput( DEBUG_LEVEL_VERBOSE, "Skipping local node (%d)...\n", nodeId );
continue;
}
ConfigRom *configRom = new ConfigRom( *portService, nodeId );
if ( !configRom->initialize() ) {
// \todo If a PHY on the bus is in power safe mode then
// the config rom is missing. So this might be just
// such this case and we can safely skip it. But it might
// be there is a real software problem on our side.
// This should be handlede more carefuly.
debugOutput( DEBUG_LEVEL_NORMAL,
"Could not read config rom from device (node id %d). "
"Skip device discovering for this node\n",
nodeId );
continue;
}
bool already_in_vector = false;
for ( FFADODeviceVectorIterator it_dev = m_avDevices.begin();
it_dev != m_avDevices.end();
++it_dev )
{
if ((*it_dev)->getConfigRom().getGuid() == configRom->getGuid()) {
already_in_vector = true;
break;
}
}
if(already_in_vector) {
if(!rediscover) {
debugWarning("Device with GUID %s already discovered on other port, skipping device...\n",
configRom->getGuidString().c_str());
}
continue;
}
if(getDebugLevel() >= DEBUG_LEVEL_VERBOSE) {
configRom->printConfigRomDebug();
}
// if spec strings are given, only add those devices
// that match the spec string(s).
// if no (valid) spec strings are present, grab all
// supported devices.
if(m_deviceStringParser->countDeviceStrings() &&
!m_deviceStringParser->match(*configRom)) {
debugOutput(DEBUG_LEVEL_VERBOSE, "Device doesn't match any of the spec strings. skipping...\n");
continue;
}
// find a driver
FFADODevice* avDevice = getDriverForDevice( configRom,
nodeId );
if ( avDevice ) {
debugOutput( DEBUG_LEVEL_NORMAL,
"driver found for device %d\n",
nodeId );
avDevice->setVerboseLevel( getDebugLevel() );
bool isFromCache = false;
if ( useCache && avDevice->loadFromCache() ) {
debugOutput( DEBUG_LEVEL_VERBOSE, "could load from cache\n" );
isFromCache = true;
// restore the debug level for everything that was loaded
avDevice->setVerboseLevel( getDebugLevel() );
} else if ( avDevice->discover() ) {
debugOutput( DEBUG_LEVEL_VERBOSE, "discovery successful\n" );
} else {
debugError( "could not discover device\n" );
delete avDevice;
continue;
}
if (snoopMode) {
debugOutput( DEBUG_LEVEL_VERBOSE,
"Enabling snoop mode on node %d...\n", nodeId );
if(!avDevice->setOption("snoopMode", snoopMode)) {
debugWarning("Could not set snoop mode for device on node %d\n", nodeId);
delete avDevice;
continue;
}
}
if ( !isFromCache && !avDevice->saveCache() ) {
debugOutput( DEBUG_LEVEL_VERBOSE, "No cached version of AVC model created\n" );
}
m_avDevices.push_back( avDevice );
if (!addElement(avDevice)) {
debugWarning("failed to add Device to Control::Container\n");
}
debugOutput( DEBUG_LEVEL_NORMAL, "discovery of node %d on port %d done...\n", nodeId, portService->getPort() );
} else {
// we didn't get a device, hence we have to delete the configrom ptr manually
delete configRom;
}
}
}
debugOutput( DEBUG_LEVEL_NORMAL, "Discovery finished...\n" );
// FIXME: do better sorting
// sort the m_avDevices vector on their GUID
// then assign reassign the id's to the devices
// the side effect of this is that for the same set of attached devices,
// a device id always corresponds to the same device
sort(m_avDevices.begin(), m_avDevices.end(), FFADODevice::compareGUID);
int i=0;
if(m_deviceStringParser->countDeviceStrings()) { // only if there are devicestrings
// first map the devices to a position using the device spec strings
std::map<fb_octlet_t, int> positionMap;
for ( FFADODeviceVectorIterator it = m_avDevices.begin();
it != m_avDevices.end();
++it )
{
int pos = m_deviceStringParser->matchPosition((*it)->getConfigRom());
fb_octlet_t guid = (*it)->getConfigRom().getGuid();
positionMap[guid] = pos;
debugOutput( DEBUG_LEVEL_VERBOSE, "Mapping %s to position %d...\n", (*it)->getConfigRom().getGuidString().c_str(), pos );
}
// now run over all positions, and add the devices that belong to it
FFADODeviceVector sorted;
int nbPositions = m_deviceStringParser->countDeviceStrings();
for (i=0; i < nbPositions; i++) {
for ( FFADODeviceVectorIterator it = m_avDevices.begin();
it != m_avDevices.end();
++it )
{
fb_octlet_t guid = (*it)->getConfigRom().getGuid();
if(positionMap[guid] == i) {
sorted.push_back(*it);
}
}
}
// assign the new vector
flushDebugOutput();
assert(sorted.size() == m_avDevices.size());
m_avDevices = sorted;
}
showDeviceInfo();
} else { // slave mode
// notify any clients
signalNotifiers(m_preUpdateNotifiers);
Ieee1394Service *portService = m_1394Services.at(0);
fb_nodeid_t nodeId = portService->getLocalNodeId();
debugOutput( DEBUG_LEVEL_VERBOSE, "Starting in slave mode on node %d...\n", nodeId );
std::auto_ptr<ConfigRom> configRom =
std::auto_ptr<ConfigRom>( new ConfigRom( *portService,
nodeId ) );
if ( !configRom->initialize() ) {
// \todo If a PHY on the bus is in power safe mode then
// the config rom is missing. So this might be just
// such this case and we can safely skip it. But it might
// be there is a real software problem on our side.
// This should be handled more carefuly.
debugOutput( DEBUG_LEVEL_NORMAL,
"Could not read config rom from device (node id %d). "
"Skip device discovering for this node\n",
nodeId );
return false;
}
// remove any already present devices
for ( FFADODeviceVectorIterator it = m_avDevices.begin();
it != m_avDevices.end();
++it )
{
if (!deleteElement(*it)) {
debugWarning("failed to remove Device from Control::Container\n");
}
delete *it;
}
m_avDevices.clear();
// get the slave driver
FFADODevice* avDevice = getSlaveDriver( configRom );
if ( avDevice ) {
debugOutput( DEBUG_LEVEL_NORMAL,
"driver found for device %d\n",
nodeId );
avDevice->setVerboseLevel( getDebugLevel() );
if ( !avDevice->discover() ) {
debugError( "could not discover device\n" );
delete avDevice;
return false;
}
if ( getDebugLevel() >= DEBUG_LEVEL_VERBOSE ) {
avDevice->showDevice();
}
m_avDevices.push_back( avDevice );
debugOutput( DEBUG_LEVEL_NORMAL, "discovery of node %d on port %d done...\n", nodeId, portService->getPort() );
}
debugOutput( DEBUG_LEVEL_NORMAL, "discovery finished...\n" );
}
m_DeviceListLock->Unlock();
// notify any clients
signalNotifiers(m_postUpdateNotifiers);
return true;
}
int
main( int argc, char** argv )
{
printf("-----------------------------------------------\n");
printf("BridgeCo BeBoB platform firmware downloader\n");
printf("Part of the FFADO project -- www.ffado.org\n");
printf("Version: %s\n", PACKAGE_VERSION);
printf("(C) 2008, Daniel Wagner, Pieter Palmers\n");
printf("This program comes with ABSOLUTELY NO WARRANTY.\n");
printf("-----------------------------------------------\n\n");
// arg parsing
argp_parse (argp, argc, argv, 0, 0, args);
if (args->nargs < 2) {
printDeviceList();
exit(0);
}
errno = 0;
char* tail;
int node_id = -1;
fb_octlet_t guid = strtoll(args->args[0], &tail, 0);
if (errno) {
perror("argument parsing failed:");
return -1;
}
if(args->magic != MAGIC_THAT_SAYS_I_KNOW_WHAT_IM_DOING) {
printf("Magic number not correct. Please specify the correct magic using the '-m' option.\n");
printf("Manipulating firmware can cause your device to magically stop working (a.k.a. 'bricking').\n");
printf("Specifying the magic number indicates that you accept the risks involved\n");
printf("with using this tool. The magic number can be found in the source code.\n\n");
return -1;
} else {
printf("YOU HAVE SPECIFIED THE CORRECT MAGIC NUMBER.\n");
printf("HENCE YOU ACCEPT THE RISKS INVOLVED.\n");
}
Ieee1394Service service;
if ( !service.initialize( args->port ) ) {
cerr << "Could not initialize IEEE 1394 service" << endl;
return -1;
}
service.setVerboseLevel( args->verbose );
for (int i = 0; i < service.getNodeCount(); i++) {
ConfigRom configRom(service, i);
configRom.initialize();
if (configRom.getGuid() == guid)
node_id = configRom.getNodeId();
}
if (node_id < 0) {
cerr << "Could not find device with matching GUID" << endl;
return -1;
}
service.setVerboseLevel( args->verbose );
BeBoB::BootloaderManager blMgr( service, node_id );
if ( args->force == 1 ) {
blMgr.setForceOperations( true );
}
blMgr.getConfigRom()->printConfigRom();
blMgr.printInfoRegisters();
if ( strcmp( args->args[1], "setguid" ) == 0 ) {
if (!args->args[2] ) {
cerr << "guid argument is missing" << endl;
return -1;
}
char* tail;
fb_octlet_t guid = strtoll(args->args[2], &tail, 0 );
if ( !blMgr.programGUID( guid ) ) {
cerr << "Failed to set GUID" << endl;
return -1;
} else {
cout << "new GUID programmed" << endl;
}
} else if ( strcmp( args->args[1], "firmware" ) == 0 ) {
if (!args->args[2] ) {
cerr << "FILE argument is missing" << endl;
return -1;
}
std::string str( args->args[2] );
blMgr.setStartBootloader( args->no_bootloader_restart != 1 );
if ( !blMgr.downloadFirmware( str ) ) {
cerr << "Failed to download firmware" << endl;
return -1;
} else {
cout << "Firmware download was successful" << endl;
cout << "Please reboot the device by removing the power and firewire connections." << endl;
}
} else if ( strcmp( args->args[1], "cne" ) == 0 ) {
if (!args->args[2] ) {
cerr << "FILE argument is missing" << endl;
return -1;
}
std::string str( args->args[2] );
if ( !blMgr.downloadCnE( str ) ) {
cerr << "Failed to download CnE" << endl;
return -1;
} else {
cout << "CnE download was successful" << endl;
cout << "Please reboot the device by removing the power and firewire connections." << endl;
}
} else if ( strcmp( args->args[1], "display" ) == 0 ) {
// nothing to do
} else if ( strcmp( args->args[1], "bcd" ) == 0 ) {
if ( !args->args[2] ) {
cerr << "FILE arguments is missing" << endl;
return -1;
}
BeBoB::BCD* bcd = new BeBoB::BCD::BCD( args->args[2] );
if ( !bcd ) {
cerr << "Could no open file " << args->args[2] << endl;
return -1;
}
if ( !bcd->parse() ) {
cerr << "Could not parse file " << args->args[2] << endl;
return -1;
}
bcd->displayInfo();
delete bcd;
} else {
cout << "Unknown operation" << endl;
}
return 0;
}
