bool
SBInstructionList::GetDescription (lldb::SBStream &description)
{
if (m_opaque_sp)
{
size_t num_instructions = GetSize ();
if (num_instructions)
{
// Call the ref() to make sure a stream is created if one deesn't
// exist already inside description...
Stream &sref = description.ref();
const uint32_t max_opcode_byte_size = m_opaque_sp->GetInstructionList().GetMaxOpcocdeByteSize();
for (size_t i=0; i<num_instructions; ++i)
{
Instruction *inst = m_opaque_sp->GetInstructionList().GetInstructionAtIndex (i).get();
if (inst == NULL)
break;
inst->Dump (&sref, max_opcode_byte_size, true, false, NULL, false);
sref.EOL();
}
return true;
}
}
return false;
}
bool SBInstructionList::GetDescription(lldb::SBStream &description) {
if (m_opaque_sp) {
size_t num_instructions = GetSize();
if (num_instructions) {
// Call the ref() to make sure a stream is created if one deesn't
// exist already inside description...
Stream &sref = description.ref();
const uint32_t max_opcode_byte_size =
m_opaque_sp->GetInstructionList().GetMaxOpcocdeByteSize();
FormatEntity::Entry format;
FormatEntity::Parse("${addr}: ", format);
SymbolContext sc;
SymbolContext prev_sc;
for (size_t i = 0; i < num_instructions; ++i) {
Instruction *inst =
m_opaque_sp->GetInstructionList().GetInstructionAtIndex(i).get();
if (inst == NULL)
break;
const Address &addr = inst->GetAddress();
prev_sc = sc;
ModuleSP module_sp(addr.GetModule());
if (module_sp) {
module_sp->ResolveSymbolContextForAddress(
addr, eSymbolContextEverything, sc);
}
inst->Dump(&sref, max_opcode_byte_size, true, false, NULL, &sc,
&prev_sc, &format, 0);
sref.EOL();
}
return true;
}
}
return false;
}
void ThreadPlanAssemblyTracer::Log() {
Stream *stream = GetLogStream();
if (!stream)
return;
RegisterContext *reg_ctx = m_thread.GetRegisterContext().get();
lldb::addr_t pc = reg_ctx->GetPC();
ProcessSP process_sp(m_thread.GetProcess());
Address pc_addr;
bool addr_valid = false;
uint8_t buffer[16] = {0}; // Must be big enough for any single instruction
addr_valid = process_sp->GetTarget().GetSectionLoadList().ResolveLoadAddress(
pc, pc_addr);
pc_addr.Dump(stream, &m_thread, Address::DumpStyleResolvedDescription,
Address::DumpStyleModuleWithFileAddress);
stream->PutCString(" ");
Disassembler *disassembler = GetDisassembler();
if (disassembler) {
Status err;
process_sp->ReadMemory(pc, buffer, sizeof(buffer), err);
if (err.Success()) {
DataExtractor extractor(buffer, sizeof(buffer),
process_sp->GetByteOrder(),
process_sp->GetAddressByteSize());
bool data_from_file = false;
if (addr_valid)
disassembler->DecodeInstructions(pc_addr, extractor, 0, 1, false,
data_from_file);
else
disassembler->DecodeInstructions(Address(pc), extractor, 0, 1, false,
data_from_file);
InstructionList &instruction_list = disassembler->GetInstructionList();
const uint32_t max_opcode_byte_size =
instruction_list.GetMaxOpcocdeByteSize();
if (instruction_list.GetSize()) {
const bool show_bytes = true;
const bool show_address = true;
Instruction *instruction =
instruction_list.GetInstructionAtIndex(0).get();
const FormatEntity::Entry *disassemble_format =
m_thread.GetProcess()
->GetTarget()
.GetDebugger()
.GetDisassemblyFormat();
instruction->Dump(stream, max_opcode_byte_size, show_address,
show_bytes, nullptr, nullptr, nullptr,
disassemble_format, 0);
}
}
}
const ABI *abi = process_sp->GetABI().get();
TypeFromUser intptr_type = GetIntPointerType();
if (abi && intptr_type.IsValid()) {
ValueList value_list;
const int num_args = 1;
for (int arg_index = 0; arg_index < num_args; ++arg_index) {
Value value;
value.SetValueType(Value::eValueTypeScalar);
// value.SetContext (Value::eContextTypeClangType,
// intptr_type.GetOpaqueQualType());
value.SetCompilerType(intptr_type);
value_list.PushValue(value);
}
if (abi->GetArgumentValues(m_thread, value_list)) {
for (int arg_index = 0; arg_index < num_args; ++arg_index) {
stream->Printf(
"\n\targ[%d]=%llx", arg_index,
value_list.GetValueAtIndex(arg_index)->GetScalar().ULongLong());
if (arg_index + 1 < num_args)
stream->PutCString(", ");
}
}
}
RegisterValue reg_value;
for (uint32_t reg_num = 0, num_registers = reg_ctx->GetRegisterCount();
reg_num < num_registers; ++reg_num) {
const RegisterInfo *reg_info = reg_ctx->GetRegisterInfoAtIndex(reg_num);
if (reg_ctx->ReadRegister(reg_info, reg_value)) {
assert(reg_num < m_register_values.size());
if (m_register_values[reg_num].GetType() == RegisterValue::eTypeInvalid ||
reg_value != m_register_values[reg_num]) {
if (reg_value.GetType() != RegisterValue::eTypeInvalid) {
stream->PutCString("\n\t");
reg_value.Dump(stream, reg_info, true, false, eFormatDefault);
}
}
m_register_values[reg_num] = reg_value;
}
}
stream->EOL();
stream->Flush();
}
Error
IRExecutionUnit::DisassembleFunction (Stream &stream,
lldb::ProcessSP &process_wp)
{
Log *log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_EXPRESSIONS));
ExecutionContext exe_ctx(process_wp);
Error ret;
ret.Clear();
lldb::addr_t func_local_addr = LLDB_INVALID_ADDRESS;
lldb::addr_t func_remote_addr = LLDB_INVALID_ADDRESS;
for (JittedFunction &function : m_jitted_functions)
{
if (strstr(function.m_name.c_str(), m_name.AsCString()))
{
func_local_addr = function.m_local_addr;
func_remote_addr = function.m_remote_addr;
}
}
if (func_local_addr == LLDB_INVALID_ADDRESS)
{
ret.SetErrorToGenericError();
ret.SetErrorStringWithFormat("Couldn't find function %s for disassembly", m_name.AsCString());
return ret;
}
if (log)
log->Printf("Found function, has local address 0x%" PRIx64 " and remote address 0x%" PRIx64, (uint64_t)func_local_addr, (uint64_t)func_remote_addr);
std::pair <lldb::addr_t, lldb::addr_t> func_range;
func_range = GetRemoteRangeForLocal(func_local_addr);
if (func_range.first == 0 && func_range.second == 0)
{
ret.SetErrorToGenericError();
ret.SetErrorStringWithFormat("Couldn't find code range for function %s", m_name.AsCString());
return ret;
}
if (log)
log->Printf("Function's code range is [0x%" PRIx64 "+0x%" PRIx64 "]", func_range.first, func_range.second);
Target *target = exe_ctx.GetTargetPtr();
if (!target)
{
ret.SetErrorToGenericError();
ret.SetErrorString("Couldn't find the target");
return ret;
}
lldb::DataBufferSP buffer_sp(new DataBufferHeap(func_range.second, 0));
Process *process = exe_ctx.GetProcessPtr();
Error err;
process->ReadMemory(func_remote_addr, buffer_sp->GetBytes(), buffer_sp->GetByteSize(), err);
if (!err.Success())
{
ret.SetErrorToGenericError();
ret.SetErrorStringWithFormat("Couldn't read from process: %s", err.AsCString("unknown error"));
return ret;
}
ArchSpec arch(target->GetArchitecture());
const char *plugin_name = NULL;
const char *flavor_string = NULL;
lldb::DisassemblerSP disassembler_sp = Disassembler::FindPlugin(arch, flavor_string, plugin_name);
if (!disassembler_sp)
{
ret.SetErrorToGenericError();
ret.SetErrorStringWithFormat("Unable to find disassembler plug-in for %s architecture.", arch.GetArchitectureName());
return ret;
}
if (!process)
{
ret.SetErrorToGenericError();
ret.SetErrorString("Couldn't find the process");
return ret;
}
DataExtractor extractor(buffer_sp,
process->GetByteOrder(),
target->GetArchitecture().GetAddressByteSize());
if (log)
{
log->Printf("Function data has contents:");
extractor.PutToLog (log,
0,
extractor.GetByteSize(),
func_remote_addr,
16,
DataExtractor::TypeUInt8);
}
disassembler_sp->DecodeInstructions (Address (func_remote_addr), extractor, 0, UINT32_MAX, false, false);
InstructionList &instruction_list = disassembler_sp->GetInstructionList();
const uint32_t max_opcode_byte_size = instruction_list.GetMaxOpcocdeByteSize();
const char *disassemble_format = "${addr-file-or-load}: ";
if (exe_ctx.HasTargetScope())
{
disassemble_format = exe_ctx.GetTargetRef().GetDebugger().GetDisassemblyFormat();
}
for (size_t instruction_index = 0, num_instructions = instruction_list.GetSize();
instruction_index < num_instructions;
++instruction_index)
{
Instruction *instruction = instruction_list.GetInstructionAtIndex(instruction_index).get();
instruction->Dump (&stream,
max_opcode_byte_size,
true,
true,
&exe_ctx,
NULL,
NULL,
disassemble_format);
stream.PutChar('\n');
}
// FIXME: The DisassemblerLLVMC has a reference cycle and won't go away if it has any active instructions.
// I'll fix that but for now, just clear the list and it will go away nicely.
disassembler_sp->GetInstructionList().Clear();
return ret;
}
void
ThreadPlanAssemblyTracer::Log ()
{
Stream *stream = GetLogStream ();
if (!stream)
return;
RegisterContext *reg_ctx = m_thread.GetRegisterContext().get();
lldb::addr_t pc = reg_ctx->GetPC();
Address pc_addr;
bool addr_valid = false;
StreamString desc;
int desired_width = 0;
addr_valid = m_process.GetTarget().GetSectionLoadList().ResolveLoadAddress (pc, pc_addr);
pc_addr.Dump(&desc, &m_thread, Address::DumpStyleResolvedDescription, Address::DumpStyleModuleWithFileAddress);
desired_width += 64;
PadOutTo(desc, desired_width);
if (m_disassembler)
{
::memset(m_buffer_sp->GetBytes(), 0, m_buffer_sp->GetByteSize());
Error err;
m_process.ReadMemory(pc, m_buffer_sp->GetBytes(), m_buffer_sp->GetByteSize(), err);
if (err.Success())
{
DataExtractor extractor(m_buffer_sp,
m_process.GetByteOrder(),
m_process.GetAddressByteSize());
if (addr_valid)
m_disassembler->DecodeInstructions (pc_addr, extractor, 0, 1);
else
m_disassembler->DecodeInstructions (Address (NULL, pc), extractor, 0, 1);
InstructionList &instruction_list = m_disassembler->GetInstructionList();
if (instruction_list.GetSize())
{
Instruction *instruction = instruction_list.GetInstructionAtIndex(0).get();
instruction->Dump (&desc,
false,
NULL,
0,
NULL,
true);
}
}
desired_width += 32;
PadOutTo(desc, desired_width);
}
if (m_abi && m_intptr_type.GetOpaqueQualType())
{
ValueList value_list;
const int num_args = 1;
for (int arg_index = 0; arg_index < num_args; ++arg_index)
{
Value value;
value.SetValueType (Value::eValueTypeScalar);
value.SetContext (Value::eContextTypeClangType, m_intptr_type.GetOpaqueQualType());
value_list.PushValue (value);
}
if (m_abi->GetArgumentValues (m_thread, value_list))
{
for (int arg_index = 0; arg_index < num_args; ++arg_index)
{
desc.Printf("arg[%d]=%llx", arg_index, value_list.GetValueAtIndex(arg_index)->GetScalar().ULongLong());
if (arg_index + 1 < num_args)
desc.Printf(", ");
}
}
}
desired_width += 20;
PadOutTo(desc, desired_width);
for (uint32_t reg_index = 0, num_registers = reg_ctx->GetRegisterCount();
reg_index < num_registers;
++reg_index)
{
uint64_t reg_value = reg_ctx->ReadRegisterAsUnsigned(reg_index, 0x0);
if (reg_value != m_register_values[reg_index])
{
desc.Printf ("%s:0x%llx->0x%llx ", reg_ctx->GetRegisterName(reg_index), m_register_values[reg_index], reg_value);
m_register_values[reg_index] = reg_value;
}
}
stream->Printf ("Single-step: %s\n", desc.GetString().c_str());
}
bool
UnwindAssemblyInstEmulation::GetNonCallSiteUnwindPlanFromAssembly (AddressRange& range,
Thread& thread,
UnwindPlan& unwind_plan)
{
if (range.GetByteSize() > 0 &&
range.GetBaseAddress().IsValid() &&
m_inst_emulator_ap.get())
{
// The instruction emulation subclass setup the unwind plan for the
// first instruction.
m_inst_emulator_ap->CreateFunctionEntryUnwind (unwind_plan);
// CreateFunctionEntryUnwind should have created the first row. If it
// doesn't, then we are done.
if (unwind_plan.GetRowCount() == 0)
return false;
ExecutionContext exe_ctx;
thread.CalculateExecutionContext(exe_ctx);
const bool prefer_file_cache = true;
DisassemblerSP disasm_sp (Disassembler::DisassembleRange (m_arch,
NULL,
NULL,
exe_ctx,
range,
prefer_file_cache));
Log *log(GetLogIfAllCategoriesSet (LIBLLDB_LOG_UNWIND));
if (disasm_sp)
{
m_range_ptr = ⦥
m_thread_ptr = &thread;
m_unwind_plan_ptr = &unwind_plan;
const uint32_t addr_byte_size = m_arch.GetAddressByteSize();
const bool show_address = true;
const bool show_bytes = true;
m_inst_emulator_ap->GetRegisterInfo (unwind_plan.GetRegisterKind(),
unwind_plan.GetInitialCFARegister(),
m_cfa_reg_info);
m_fp_is_cfa = false;
m_register_values.clear();
m_pushed_regs.clear();
// Initialize the CFA with a known value. In the 32 bit case
// it will be 0x80000000, and in the 64 bit case 0x8000000000000000.
// We use the address byte size to be safe for any future address sizes
m_initial_sp = (1ull << ((addr_byte_size * 8) - 1));
RegisterValue cfa_reg_value;
cfa_reg_value.SetUInt (m_initial_sp, m_cfa_reg_info.byte_size);
SetRegisterValue (m_cfa_reg_info, cfa_reg_value);
const InstructionList &inst_list = disasm_sp->GetInstructionList ();
const size_t num_instructions = inst_list.GetSize();
if (num_instructions > 0)
{
Instruction *inst = inst_list.GetInstructionAtIndex (0).get();
const lldb::addr_t base_addr = inst->GetAddress().GetFileAddress();
// Map for storing the unwind plan row and the value of the registers at a given offset.
// When we see a forward branch we add a new entry to this map with the actual unwind plan
// row and register context for the target address of the branch as the current data have
// to be valid for the target address of the branch too if we are in the same function.
std::map<lldb::addr_t, std::pair<UnwindPlan::RowSP, RegisterValueMap>> saved_unwind_states;
// Make a copy of the current instruction Row and save it in m_curr_row
// so we can add updates as we process the instructions.
UnwindPlan::RowSP last_row = unwind_plan.GetLastRow();
UnwindPlan::Row *newrow = new UnwindPlan::Row;
if (last_row.get())
*newrow = *last_row.get();
m_curr_row.reset(newrow);
// Add the initial state to the save list with offset 0.
saved_unwind_states.insert({0, {last_row, m_register_values}});
// cache the pc register number (in whatever register numbering this UnwindPlan uses) for
// quick reference during instruction parsing.
uint32_t pc_reg_num = LLDB_INVALID_REGNUM;
RegisterInfo pc_reg_info;
if (m_inst_emulator_ap->GetRegisterInfo (eRegisterKindGeneric, LLDB_REGNUM_GENERIC_PC, pc_reg_info))
pc_reg_num = pc_reg_info.kinds[unwind_plan.GetRegisterKind()];
else
pc_reg_num = LLDB_INVALID_REGNUM;
// cache the return address register number (in whatever register numbering this UnwindPlan uses) for
// quick reference during instruction parsing.
uint32_t ra_reg_num = LLDB_INVALID_REGNUM;
RegisterInfo ra_reg_info;
if (m_inst_emulator_ap->GetRegisterInfo (eRegisterKindGeneric, LLDB_REGNUM_GENERIC_RA, ra_reg_info))
ra_reg_num = ra_reg_info.kinds[unwind_plan.GetRegisterKind()];
else
ra_reg_num = LLDB_INVALID_REGNUM;
for (size_t idx=0; idx<num_instructions; ++idx)
{
m_curr_row_modified = false;
m_forward_branch_offset = 0;
inst = inst_list.GetInstructionAtIndex (idx).get();
if (inst)
{
lldb::addr_t current_offset = inst->GetAddress().GetFileAddress() - base_addr;
auto it = saved_unwind_states.upper_bound(current_offset);
assert(it != saved_unwind_states.begin() && "Unwind row for the function entry missing");
--it; // Move it to the row corresponding to the current offset
// If the offset of m_curr_row don't match with the offset we see in saved_unwind_states
// then we have to update m_curr_row and m_register_values based on the saved values. It
// is happenning after we processed an epilogue and a return to caller instruction.
if (it->second.first->GetOffset() != m_curr_row->GetOffset())
{
UnwindPlan::Row *newrow = new UnwindPlan::Row;
*newrow = *it->second.first;
m_curr_row.reset(newrow);
m_register_values = it->second.second;;
}
if (log && log->GetVerbose ())
{
StreamString strm;
lldb_private::FormatEntity::Entry format;
FormatEntity::Parse("${frame.pc}: ", format);
inst->Dump(&strm, inst_list.GetMaxOpcocdeByteSize (), show_address, show_bytes, NULL, NULL, NULL, &format, 0);
log->PutCString (strm.GetData());
}
m_inst_emulator_ap->SetInstruction (inst->GetOpcode(),
inst->GetAddress(),
exe_ctx.GetTargetPtr());
m_inst_emulator_ap->EvaluateInstruction (eEmulateInstructionOptionIgnoreConditions);
// If the current instruction is a branch forward then save the current CFI information
// for the offset where we are branching.
if (m_forward_branch_offset != 0 && range.ContainsFileAddress(inst->GetAddress().GetFileAddress() + m_forward_branch_offset))
{
auto newrow = std::make_shared<UnwindPlan::Row>(*m_curr_row.get());
newrow->SetOffset(current_offset + m_forward_branch_offset);
saved_unwind_states.insert({current_offset + m_forward_branch_offset, {newrow, m_register_values}});
unwind_plan.InsertRow(newrow);
}
// Were there any changes to the CFI while evaluating this instruction?
if (m_curr_row_modified)
{
// Save the modified row if we don't already have a CFI row in the currennt address
if (saved_unwind_states.count(current_offset + inst->GetOpcode().GetByteSize()) == 0)
{
m_curr_row->SetOffset (current_offset + inst->GetOpcode().GetByteSize());
unwind_plan.InsertRow (m_curr_row);
saved_unwind_states.insert({current_offset + inst->GetOpcode().GetByteSize(), {m_curr_row, m_register_values}});
// Allocate a new Row for m_curr_row, copy the current state into it
UnwindPlan::Row *newrow = new UnwindPlan::Row;
*newrow = *m_curr_row.get();
m_curr_row.reset(newrow);
}
}
}
}
}
// FIXME: The DisassemblerLLVMC has a reference cycle and won't go away if it has any active instructions.
// I'll fix that but for now, just clear the list and it will go away nicely.
disasm_sp->GetInstructionList().Clear();
}
if (log && log->GetVerbose ())
{
StreamString strm;
lldb::addr_t base_addr = range.GetBaseAddress().GetLoadAddress(thread.CalculateTarget().get());
strm.Printf ("Resulting unwind rows for [0x%" PRIx64 " - 0x%" PRIx64 "):", base_addr, base_addr + range.GetByteSize());
unwind_plan.Dump(strm, &thread, base_addr);
log->PutCString (strm.GetData());
}
return unwind_plan.GetRowCount() > 0;
}
return false;
}
bool
Disassembler::PrintInstructions
(
Disassembler *disasm_ptr,
Debugger &debugger,
const ArchSpec &arch,
const ExecutionContext &exe_ctx,
uint32_t num_instructions,
uint32_t num_mixed_context_lines,
uint32_t options,
Stream &strm
)
{
// We got some things disassembled...
size_t num_instructions_found = disasm_ptr->GetInstructionList().GetSize();
if (num_instructions > 0 && num_instructions < num_instructions_found)
num_instructions_found = num_instructions;
const uint32_t max_opcode_byte_size = disasm_ptr->GetInstructionList().GetMaxOpcocdeByteSize ();
uint32_t offset = 0;
SymbolContext sc;
SymbolContext prev_sc;
AddressRange sc_range;
const Address *pc_addr_ptr = NULL;
StackFrame *frame = exe_ctx.GetFramePtr();
TargetSP target_sp (exe_ctx.GetTargetSP());
SourceManager &source_manager = target_sp ? target_sp->GetSourceManager() : debugger.GetSourceManager();
if (frame)
{
pc_addr_ptr = &frame->GetFrameCodeAddress();
}
const uint32_t scope = eSymbolContextLineEntry | eSymbolContextFunction | eSymbolContextSymbol;
const bool use_inline_block_range = false;
const FormatEntity::Entry *disassembly_format = NULL;
FormatEntity::Entry format;
if (exe_ctx.HasTargetScope())
{
disassembly_format = exe_ctx.GetTargetRef().GetDebugger().GetDisassemblyFormat ();
}
else
{
FormatEntity::Parse("${addr}: ", format);
disassembly_format = &format;
}
// First pass: step through the list of instructions,
// find how long the initial addresses strings are, insert padding
// in the second pass so the opcodes all line up nicely.
size_t address_text_size = 0;
for (size_t i = 0; i < num_instructions_found; ++i)
{
Instruction *inst = disasm_ptr->GetInstructionList().GetInstructionAtIndex (i).get();
if (inst)
{
const Address &addr = inst->GetAddress();
ModuleSP module_sp (addr.GetModule());
if (module_sp)
{
const uint32_t resolve_mask = eSymbolContextFunction | eSymbolContextSymbol;
uint32_t resolved_mask = module_sp->ResolveSymbolContextForAddress(addr, resolve_mask, sc);
if (resolved_mask)
{
StreamString strmstr;
Debugger::FormatDisassemblerAddress (disassembly_format, &sc, NULL, &exe_ctx, &addr, strmstr);
size_t cur_line = strmstr.GetSizeOfLastLine();
if (cur_line > address_text_size)
address_text_size = cur_line;
}
sc.Clear(false);
}
}
}
for (size_t i = 0; i < num_instructions_found; ++i)
{
Instruction *inst = disasm_ptr->GetInstructionList().GetInstructionAtIndex (i).get();
if (inst)
{
const Address &addr = inst->GetAddress();
const bool inst_is_at_pc = pc_addr_ptr && addr == *pc_addr_ptr;
prev_sc = sc;
ModuleSP module_sp (addr.GetModule());
if (module_sp)
{
uint32_t resolved_mask = module_sp->ResolveSymbolContextForAddress(addr, eSymbolContextEverything, sc);
if (resolved_mask)
{
if (num_mixed_context_lines)
{
if (!sc_range.ContainsFileAddress (addr))
{
sc.GetAddressRange (scope, 0, use_inline_block_range, sc_range);
if (sc != prev_sc)
{
if (offset != 0)
strm.EOL();
sc.DumpStopContext(&strm, exe_ctx.GetProcessPtr(), addr, false, true, false, false, true);
strm.EOL();
if (sc.comp_unit && sc.line_entry.IsValid())
{
source_manager.DisplaySourceLinesWithLineNumbers (sc.line_entry.file,
sc.line_entry.line,
num_mixed_context_lines,
num_mixed_context_lines,
((inst_is_at_pc && (options & eOptionMarkPCSourceLine)) ? "->" : ""),
&strm);
}
}
}
}
}
else
{
sc.Clear(true);
}
}
const bool show_bytes = (options & eOptionShowBytes) != 0;
inst->Dump (&strm, max_opcode_byte_size, true, show_bytes, &exe_ctx, &sc, &prev_sc, NULL, address_text_size);
strm.EOL();
}
else
{
break;
}
}
return true;
}
bool UnwindAssemblyInstEmulation::GetNonCallSiteUnwindPlanFromAssembly(
AddressRange &range, uint8_t *opcode_data, size_t opcode_size,
UnwindPlan &unwind_plan) {
if (opcode_data == nullptr || opcode_size == 0)
return false;
if (range.GetByteSize() > 0 && range.GetBaseAddress().IsValid() &&
m_inst_emulator_ap.get()) {
// The instruction emulation subclass setup the unwind plan for the
// first instruction.
m_inst_emulator_ap->CreateFunctionEntryUnwind(unwind_plan);
// CreateFunctionEntryUnwind should have created the first row. If it
// doesn't, then we are done.
if (unwind_plan.GetRowCount() == 0)
return false;
const bool prefer_file_cache = true;
DisassemblerSP disasm_sp(Disassembler::DisassembleBytes(
m_arch, NULL, NULL, range.GetBaseAddress(), opcode_data, opcode_size,
99999, prefer_file_cache));
Log *log(GetLogIfAllCategoriesSet(LIBLLDB_LOG_UNWIND));
if (disasm_sp) {
m_range_ptr = ⦥
m_unwind_plan_ptr = &unwind_plan;
const uint32_t addr_byte_size = m_arch.GetAddressByteSize();
const bool show_address = true;
const bool show_bytes = true;
m_inst_emulator_ap->GetRegisterInfo(unwind_plan.GetRegisterKind(),
unwind_plan.GetInitialCFARegister(),
m_cfa_reg_info);
m_fp_is_cfa = false;
m_register_values.clear();
m_pushed_regs.clear();
// Initialize the CFA with a known value. In the 32 bit case
// it will be 0x80000000, and in the 64 bit case 0x8000000000000000.
// We use the address byte size to be safe for any future address sizes
m_initial_sp = (1ull << ((addr_byte_size * 8) - 1));
RegisterValue cfa_reg_value;
cfa_reg_value.SetUInt(m_initial_sp, m_cfa_reg_info.byte_size);
SetRegisterValue(m_cfa_reg_info, cfa_reg_value);
const InstructionList &inst_list = disasm_sp->GetInstructionList();
const size_t num_instructions = inst_list.GetSize();
if (num_instructions > 0) {
Instruction *inst = inst_list.GetInstructionAtIndex(0).get();
const lldb::addr_t base_addr = inst->GetAddress().GetFileAddress();
// Map for storing the unwind plan row and the value of the registers at
// a given offset.
// When we see a forward branch we add a new entry to this map with the
// actual unwind plan
// row and register context for the target address of the branch as the
// current data have
// to be valid for the target address of the branch too if we are in the
// same function.
std::map<lldb::addr_t, std::pair<UnwindPlan::RowSP, RegisterValueMap>>
saved_unwind_states;
// Make a copy of the current instruction Row and save it in m_curr_row
// so we can add updates as we process the instructions.
UnwindPlan::RowSP last_row = unwind_plan.GetLastRow();
UnwindPlan::Row *newrow = new UnwindPlan::Row;
if (last_row.get())
*newrow = *last_row.get();
m_curr_row.reset(newrow);
// Add the initial state to the save list with offset 0.
saved_unwind_states.insert({0, {last_row, m_register_values}});
// cache the pc register number (in whatever register numbering this
// UnwindPlan uses) for
// quick reference during instruction parsing.
RegisterInfo pc_reg_info;
m_inst_emulator_ap->GetRegisterInfo(
eRegisterKindGeneric, LLDB_REGNUM_GENERIC_PC, pc_reg_info);
// cache the return address register number (in whatever register
// numbering this UnwindPlan uses) for
// quick reference during instruction parsing.
RegisterInfo ra_reg_info;
m_inst_emulator_ap->GetRegisterInfo(
eRegisterKindGeneric, LLDB_REGNUM_GENERIC_RA, ra_reg_info);
// The architecture dependent condition code of the last processed
// instruction.
EmulateInstruction::InstructionCondition last_condition =
EmulateInstruction::UnconditionalCondition;
lldb::addr_t condition_block_start_offset = 0;
for (size_t idx = 0; idx < num_instructions; ++idx) {
m_curr_row_modified = false;
m_forward_branch_offset = 0;
inst = inst_list.GetInstructionAtIndex(idx).get();
if (inst) {
lldb::addr_t current_offset =
inst->GetAddress().GetFileAddress() - base_addr;
auto it = saved_unwind_states.upper_bound(current_offset);
assert(it != saved_unwind_states.begin() &&
"Unwind row for the function entry missing");
--it; // Move it to the row corresponding to the current offset
// If the offset of m_curr_row don't match with the offset we see in
// saved_unwind_states
// then we have to update m_curr_row and m_register_values based on
// the saved values. It
// is happenning after we processed an epilogue and a return to
// caller instruction.
if (it->second.first->GetOffset() != m_curr_row->GetOffset()) {
UnwindPlan::Row *newrow = new UnwindPlan::Row;
*newrow = *it->second.first;
m_curr_row.reset(newrow);
m_register_values = it->second.second;
}
m_inst_emulator_ap->SetInstruction(inst->GetOpcode(),
inst->GetAddress(), nullptr);
if (last_condition !=
m_inst_emulator_ap->GetInstructionCondition()) {
if (m_inst_emulator_ap->GetInstructionCondition() !=
EmulateInstruction::UnconditionalCondition &&
saved_unwind_states.count(current_offset) == 0) {
// If we don't have a saved row for the current offset then save
// our
// current state because we will have to restore it after the
// conditional block.
auto new_row =
std::make_shared<UnwindPlan::Row>(*m_curr_row.get());
saved_unwind_states.insert(
{current_offset, {new_row, m_register_values}});
}
// If the last instruction was conditional with a different
// condition
// then the then current condition then restore the condition.
if (last_condition !=
EmulateInstruction::UnconditionalCondition) {
const auto &saved_state =
saved_unwind_states.at(condition_block_start_offset);
m_curr_row =
std::make_shared<UnwindPlan::Row>(*saved_state.first);
m_curr_row->SetOffset(current_offset);
m_register_values = saved_state.second;
bool replace_existing =
true; // The last instruction might already
// created a row for this offset and
// we want to overwrite it.
unwind_plan.InsertRow(
std::make_shared<UnwindPlan::Row>(*m_curr_row),
replace_existing);
}
// We are starting a new conditional block at the catual offset
condition_block_start_offset = current_offset;
}
if (log && log->GetVerbose()) {
StreamString strm;
lldb_private::FormatEntity::Entry format;
FormatEntity::Parse("${frame.pc}: ", format);
inst->Dump(&strm, inst_list.GetMaxOpcocdeByteSize(), show_address,
show_bytes, NULL, NULL, NULL, &format, 0);
log->PutString(strm.GetString());
}
last_condition = m_inst_emulator_ap->GetInstructionCondition();
m_inst_emulator_ap->EvaluateInstruction(
eEmulateInstructionOptionIgnoreConditions);
// If the current instruction is a branch forward then save the
// current CFI information
// for the offset where we are branching.
if (m_forward_branch_offset != 0 &&
range.ContainsFileAddress(inst->GetAddress().GetFileAddress() +
m_forward_branch_offset)) {
auto newrow =
std::make_shared<UnwindPlan::Row>(*m_curr_row.get());
newrow->SetOffset(current_offset + m_forward_branch_offset);
saved_unwind_states.insert(
{current_offset + m_forward_branch_offset,
{newrow, m_register_values}});
unwind_plan.InsertRow(newrow);
}
// Were there any changes to the CFI while evaluating this
// instruction?
if (m_curr_row_modified) {
// Save the modified row if we don't already have a CFI row in the
// currennt address
if (saved_unwind_states.count(
current_offset + inst->GetOpcode().GetByteSize()) == 0) {
m_curr_row->SetOffset(current_offset +
inst->GetOpcode().GetByteSize());
unwind_plan.InsertRow(m_curr_row);
saved_unwind_states.insert(
{current_offset + inst->GetOpcode().GetByteSize(),
{m_curr_row, m_register_values}});
// Allocate a new Row for m_curr_row, copy the current state
// into it
UnwindPlan::Row *newrow = new UnwindPlan::Row;
*newrow = *m_curr_row.get();
m_curr_row.reset(newrow);
}
}
}
}
}
}
if (log && log->GetVerbose()) {
StreamString strm;
lldb::addr_t base_addr = range.GetBaseAddress().GetFileAddress();
strm.Printf("Resulting unwind rows for [0x%" PRIx64 " - 0x%" PRIx64 "):",
base_addr, base_addr + range.GetByteSize());
unwind_plan.Dump(strm, nullptr, base_addr);
log->PutString(strm.GetString());
}
return unwind_plan.GetRowCount() > 0;
}
return false;
}
bool
Disassembler::PrintInstructions
(
Disassembler *disasm_ptr,
Debugger &debugger,
const ArchSpec &arch,
const ExecutionContext &exe_ctx,
uint32_t num_instructions,
uint32_t num_mixed_context_lines,
uint32_t options,
Stream &strm
)
{
// We got some things disassembled...
size_t num_instructions_found = disasm_ptr->GetInstructionList().GetSize();
if (num_instructions > 0 && num_instructions < num_instructions_found)
num_instructions_found = num_instructions;
const uint32_t max_opcode_byte_size = disasm_ptr->GetInstructionList().GetMaxOpcocdeByteSize ();
uint32_t offset = 0;
SymbolContext sc;
SymbolContext prev_sc;
AddressRange sc_range;
const Address *pc_addr_ptr = NULL;
ExecutionContextScope *exe_scope = exe_ctx.GetBestExecutionContextScope();
Frame *frame = exe_ctx.GetFramePtr();
TargetSP target_sp (exe_ctx.GetTargetSP());
SourceManager &source_manager = target_sp ? target_sp->GetSourceManager() : debugger.GetSourceManager();
if (frame)
pc_addr_ptr = &frame->GetFrameCodeAddress();
const uint32_t scope = eSymbolContextLineEntry | eSymbolContextFunction | eSymbolContextSymbol;
const bool use_inline_block_range = false;
for (size_t i=0; i<num_instructions_found; ++i)
{
Instruction *inst = disasm_ptr->GetInstructionList().GetInstructionAtIndex (i).get();
if (inst)
{
const Address &addr = inst->GetAddress();
const bool inst_is_at_pc = pc_addr_ptr && addr == *pc_addr_ptr;
prev_sc = sc;
ModuleSP module_sp (addr.GetModule());
if (module_sp)
{
uint32_t resolved_mask = module_sp->ResolveSymbolContextForAddress(addr, eSymbolContextEverything, sc);
if (resolved_mask)
{
if (num_mixed_context_lines)
{
if (!sc_range.ContainsFileAddress (addr))
{
sc.GetAddressRange (scope, 0, use_inline_block_range, sc_range);
if (sc != prev_sc)
{
if (offset != 0)
strm.EOL();
sc.DumpStopContext(&strm, exe_ctx.GetProcessPtr(), addr, false, true, false);
strm.EOL();
if (sc.comp_unit && sc.line_entry.IsValid())
{
source_manager.DisplaySourceLinesWithLineNumbers (sc.line_entry.file,
sc.line_entry.line,
num_mixed_context_lines,
num_mixed_context_lines,
((inst_is_at_pc && (options & eOptionMarkPCSourceLine)) ? "->" : ""),
&strm);
}
}
}
}
else if ((sc.function || sc.symbol) && (sc.function != prev_sc.function || sc.symbol != prev_sc.symbol))
{
if (prev_sc.function || prev_sc.symbol)
strm.EOL();
bool show_fullpaths = false;
bool show_module = true;
bool show_inlined_frames = true;
sc.DumpStopContext (&strm,
exe_scope,
addr,
show_fullpaths,
show_module,
show_inlined_frames);
strm << ":\n";
}
}
else
{
sc.Clear(true);
}
}
if ((options & eOptionMarkPCAddress) && pc_addr_ptr)
{
strm.PutCString(inst_is_at_pc ? "-> " : " ");
}
const bool show_bytes = (options & eOptionShowBytes) != 0;
inst->Dump(&strm, max_opcode_byte_size, true, show_bytes, &exe_ctx);
strm.EOL();
}
else
{
break;
}
}
return true;
}
Error
ClangExpressionParser::DisassembleFunction (Stream &stream, ExecutionContext &exe_ctx, RecordingMemoryManager *jit_memory_manager)
{
lldb::LogSP log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_EXPRESSIONS));
const char *name = m_expr.FunctionName();
Error ret;
ret.Clear();
lldb::addr_t func_local_addr = LLDB_INVALID_ADDRESS;
lldb::addr_t func_remote_addr = LLDB_INVALID_ADDRESS;
std::vector<JittedFunction>::iterator pos, end = m_jitted_functions.end();
for (pos = m_jitted_functions.begin(); pos < end; pos++)
{
if (strstr(pos->m_name.c_str(), name))
{
func_local_addr = pos->m_local_addr;
func_remote_addr = pos->m_remote_addr;
}
}
if (func_local_addr == LLDB_INVALID_ADDRESS)
{
ret.SetErrorToGenericError();
ret.SetErrorStringWithFormat("Couldn't find function %s for disassembly", name);
return ret;
}
if(log)
log->Printf("Found function, has local address 0x%llx and remote address 0x%llx", (uint64_t)func_local_addr, (uint64_t)func_remote_addr);
std::pair <lldb::addr_t, lldb::addr_t> func_range;
func_range = jit_memory_manager->GetRemoteRangeForLocal(func_local_addr);
if (func_range.first == 0 && func_range.second == 0)
{
ret.SetErrorToGenericError();
ret.SetErrorStringWithFormat("Couldn't find code range for function %s", name);
return ret;
}
if(log)
log->Printf("Function's code range is [0x%llx-0x%llx]", func_range.first, func_range.second);
if (!exe_ctx.target)
{
ret.SetErrorToGenericError();
ret.SetErrorString("Couldn't find the target");
}
lldb::DataBufferSP buffer_sp(new DataBufferHeap(func_range.second - func_remote_addr, 0));
Error err;
exe_ctx.process->ReadMemory(func_remote_addr, buffer_sp->GetBytes(), buffer_sp->GetByteSize(), err);
if (!err.Success())
{
ret.SetErrorToGenericError();
ret.SetErrorStringWithFormat("Couldn't read from process: %s", err.AsCString("unknown error"));
return ret;
}
ArchSpec arch(exe_ctx.target->GetArchitecture());
Disassembler *disassembler = Disassembler::FindPlugin(arch);
if (disassembler == NULL)
{
ret.SetErrorToGenericError();
ret.SetErrorStringWithFormat("Unable to find disassembler plug-in for %s architecture.", arch.GetArchitectureName());
return ret;
}
if (!exe_ctx.process)
{
ret.SetErrorToGenericError();
ret.SetErrorString("Couldn't find the process");
return ret;
}
DataExtractor extractor(buffer_sp,
exe_ctx.process->GetByteOrder(),
exe_ctx.target->GetArchitecture().GetAddressByteSize());
if (log)
{
log->Printf("Function data has contents:");
extractor.PutToLog (log.get(),
0,
extractor.GetByteSize(),
func_remote_addr,
16,
DataExtractor::TypeUInt8);
}
disassembler->DecodeInstructions (Address (NULL, func_remote_addr), extractor, 0, UINT32_MAX);
InstructionList &instruction_list = disassembler->GetInstructionList();
uint32_t bytes_offset = 0;
for (uint32_t instruction_index = 0, num_instructions = instruction_list.GetSize();
instruction_index < num_instructions;
++instruction_index)
{
Instruction *instruction = instruction_list.GetInstructionAtIndex(instruction_index).get();
instruction->Dump (&stream,
true,
&extractor,
bytes_offset,
&exe_ctx,
true);
stream.PutChar('\n');
bytes_offset += instruction->GetByteSize();
}
return ret;
}
bool
UnwindAssemblyInstEmulation::GetNonCallSiteUnwindPlanFromAssembly (AddressRange& range,
Thread& thread,
UnwindPlan& unwind_plan)
{
if (range.GetByteSize() > 0 &&
range.GetBaseAddress().IsValid() &&
m_inst_emulator_ap.get())
{
// The the instruction emulation subclass setup the unwind plan for the
// first instruction.
m_inst_emulator_ap->CreateFunctionEntryUnwind (unwind_plan);
// CreateFunctionEntryUnwind should have created the first row. If it
// doesn't, then we are done.
if (unwind_plan.GetRowCount() == 0)
return false;
ExecutionContext exe_ctx;
thread.CalculateExecutionContext(exe_ctx);
DisassemblerSP disasm_sp (Disassembler::DisassembleRange (m_arch,
NULL,
exe_ctx,
range));
LogSP log(GetLogIfAllCategoriesSet (LIBLLDB_LOG_UNWIND));
if (disasm_sp)
{
m_range_ptr = ⦥
m_thread_ptr = &thread;
m_unwind_plan_ptr = &unwind_plan;
const uint32_t addr_byte_size = m_arch.GetAddressByteSize();
const bool show_address = true;
const bool show_bytes = true;
const bool raw = false;
// Initialize the CFA with a known value. In the 32 bit case
// it will be 0x80000000, and in the 64 bit case 0x8000000000000000.
// We use the address byte size to be safe for any future addresss sizes
m_inst_emulator_ap->GetRegisterInfo (unwind_plan.GetRegisterKind(),
unwind_plan.GetInitialCFARegister(),
m_cfa_reg_info);
m_fp_is_cfa = false;
m_register_values.clear();
m_pushed_regs.clear();
m_initial_sp = (1ull << ((addr_byte_size * 8) - 1));
RegisterValue cfa_reg_value;
cfa_reg_value.SetUInt (m_initial_sp, m_cfa_reg_info.byte_size);
SetRegisterValue (m_cfa_reg_info, cfa_reg_value);
const InstructionList &inst_list = disasm_sp->GetInstructionList ();
const size_t num_instructions = inst_list.GetSize();
if (num_instructions > 0)
{
Instruction *inst = inst_list.GetInstructionAtIndex (0).get();
const addr_t base_addr = inst->GetAddress().GetFileAddress();
// Initialize the current row with the one row that was created
// from the CreateFunctionEntryUnwind call above...
m_curr_row = unwind_plan.GetLastRow();
for (size_t idx=0; idx<num_instructions; ++idx)
{
inst = inst_list.GetInstructionAtIndex (idx).get();
if (inst)
{
if (log && log->GetVerbose ())
{
StreamString strm;
inst->Dump(&strm, inst_list.GetMaxOpcocdeByteSize (), show_address, show_bytes, &exe_ctx, raw);
log->PutCString (strm.GetData());
}
m_inst_emulator_ap->SetInstruction (inst->GetOpcode(),
inst->GetAddress(),
exe_ctx.GetTargetPtr());
m_inst_emulator_ap->EvaluateInstruction (eEmulateInstructionOptionIgnoreConditions);
if (unwind_plan.GetLastRow() != m_curr_row)
{
// Be sure to not edit the offset unless our row has changed
// so that the "!=" call above doesn't trigger every time
m_curr_row.SetOffset (inst->GetAddress().GetFileAddress() + inst->GetOpcode().GetByteSize() - base_addr);
// Append the new row
unwind_plan.AppendRow (m_curr_row);
}
}
}
}
}
if (log && log->GetVerbose ())
{
StreamString strm;
lldb::addr_t base_addr = range.GetBaseAddress().GetLoadAddress(&thread.GetProcess().GetTarget());
strm.Printf ("Resulting unwind rows for [0x%llx - 0x%llx):", base_addr, base_addr + range.GetByteSize());
unwind_plan.Dump(strm, &thread, base_addr);
log->PutCString (strm.GetData());
}
return unwind_plan.GetRowCount() > 0;
}
return false;
}
bool
UnwindAssemblyInstEmulation::GetNonCallSiteUnwindPlanFromAssembly (AddressRange& range,
Thread& thread,
UnwindPlan& unwind_plan)
{
if (range.GetByteSize() > 0 &&
range.GetBaseAddress().IsValid() &&
m_inst_emulator_ap.get())
{
// The instruction emulation subclass setup the unwind plan for the
// first instruction.
m_inst_emulator_ap->CreateFunctionEntryUnwind (unwind_plan);
// CreateFunctionEntryUnwind should have created the first row. If it
// doesn't, then we are done.
if (unwind_plan.GetRowCount() == 0)
return false;
ExecutionContext exe_ctx;
thread.CalculateExecutionContext(exe_ctx);
const bool prefer_file_cache = true;
DisassemblerSP disasm_sp (Disassembler::DisassembleRange (m_arch,
NULL,
NULL,
exe_ctx,
range,
prefer_file_cache));
Log *log(GetLogIfAllCategoriesSet (LIBLLDB_LOG_UNWIND));
if (disasm_sp)
{
m_range_ptr = ⦥
m_thread_ptr = &thread;
m_unwind_plan_ptr = &unwind_plan;
const uint32_t addr_byte_size = m_arch.GetAddressByteSize();
const bool show_address = true;
const bool show_bytes = true;
m_inst_emulator_ap->GetRegisterInfo (unwind_plan.GetRegisterKind(),
unwind_plan.GetInitialCFARegister(),
m_cfa_reg_info);
m_fp_is_cfa = false;
m_register_values.clear();
m_pushed_regs.clear();
// Initialize the CFA with a known value. In the 32 bit case
// it will be 0x80000000, and in the 64 bit case 0x8000000000000000.
// We use the address byte size to be safe for any future address sizes
m_initial_sp = (1ull << ((addr_byte_size * 8) - 1));
RegisterValue cfa_reg_value;
cfa_reg_value.SetUInt (m_initial_sp, m_cfa_reg_info.byte_size);
SetRegisterValue (m_cfa_reg_info, cfa_reg_value);
const InstructionList &inst_list = disasm_sp->GetInstructionList ();
const size_t num_instructions = inst_list.GetSize();
if (num_instructions > 0)
{
Instruction *inst = inst_list.GetInstructionAtIndex (0).get();
const addr_t base_addr = inst->GetAddress().GetFileAddress();
// Make a copy of the current instruction Row and save it in m_curr_row
// so we can add updates as we process the instructions.
UnwindPlan::RowSP last_row = unwind_plan.GetLastRow();
UnwindPlan::Row *newrow = new UnwindPlan::Row;
if (last_row.get())
*newrow = *last_row.get();
m_curr_row.reset(newrow);
// Once we've seen the initial prologue instructions complete, save a
// copy of the CFI at that point into prologue_completed_row for possible
// use later.
int instructions_since_last_prologue_insn = 0; // # of insns since last CFI was update
bool reinstate_prologue_next_instruction = false; // Next iteration, re-install the prologue row of CFI
bool last_instruction_restored_return_addr_reg = false; // re-install the prologue row of CFI if the next instruction is a branch immediate
bool return_address_register_has_been_saved = false; // if we've seen the ra register get saved yet
UnwindPlan::RowSP prologue_completed_row; // copy of prologue row of CFI
// cache the pc register number (in whatever register numbering this UnwindPlan uses) for
// quick reference during instruction parsing.
uint32_t pc_reg_num = LLDB_INVALID_REGNUM;
RegisterInfo pc_reg_info;
if (m_inst_emulator_ap->GetRegisterInfo (eRegisterKindGeneric, LLDB_REGNUM_GENERIC_PC, pc_reg_info))
pc_reg_num = pc_reg_info.kinds[unwind_plan.GetRegisterKind()];
else
pc_reg_num = LLDB_INVALID_REGNUM;
// cache the return address register number (in whatever register numbering this UnwindPlan uses) for
// quick reference during instruction parsing.
uint32_t ra_reg_num = LLDB_INVALID_REGNUM;
RegisterInfo ra_reg_info;
if (m_inst_emulator_ap->GetRegisterInfo (eRegisterKindGeneric, LLDB_REGNUM_GENERIC_RA, ra_reg_info))
ra_reg_num = ra_reg_info.kinds[unwind_plan.GetRegisterKind()];
else
ra_reg_num = LLDB_INVALID_REGNUM;
for (size_t idx=0; idx<num_instructions; ++idx)
{
m_curr_row_modified = false;
m_curr_insn_restored_a_register = false;
inst = inst_list.GetInstructionAtIndex (idx).get();
if (inst)
{
if (log && log->GetVerbose ())
{
StreamString strm;
inst->Dump(&strm, inst_list.GetMaxOpcocdeByteSize (), show_address, show_bytes, NULL);
log->PutCString (strm.GetData());
}
m_inst_emulator_ap->SetInstruction (inst->GetOpcode(),
inst->GetAddress(),
exe_ctx.GetTargetPtr());
m_inst_emulator_ap->EvaluateInstruction (eEmulateInstructionOptionIgnoreConditions);
// Were there any changes to the CFI while evaluating this instruction?
if (m_curr_row_modified)
{
reinstate_prologue_next_instruction = false;
m_curr_row->SetOffset (inst->GetAddress().GetFileAddress() + inst->GetOpcode().GetByteSize() - base_addr);
// Append the new row
unwind_plan.AppendRow (m_curr_row);
// Allocate a new Row for m_curr_row, copy the current state into it
UnwindPlan::Row *newrow = new UnwindPlan::Row;
*newrow = *m_curr_row.get();
m_curr_row.reset(newrow);
// If m_curr_insn_restored_a_register == true, we're looking at an epilogue instruction.
// Set instructions_since_last_prologue_insn to a very high number so we don't append
// any of these epilogue instructions to our prologue_complete row.
if (m_curr_insn_restored_a_register == false && instructions_since_last_prologue_insn < 8)
instructions_since_last_prologue_insn = 0;
else
instructions_since_last_prologue_insn = 99;
UnwindPlan::Row::RegisterLocation pc_regloc;
UnwindPlan::Row::RegisterLocation ra_regloc;
// While parsing the instructions of this function, if we've ever
// seen the return address register (aka lr on arm) in a non-IsSame() state,
// it has been saved on the stack. If it's ever back to IsSame(), we've
// executed an epilogue.
if (ra_reg_num != LLDB_INVALID_REGNUM
&& m_curr_row->GetRegisterInfo (ra_reg_num, ra_regloc)
&& !ra_regloc.IsSame())
{
return_address_register_has_been_saved = true;
}
// If the caller's pc is "same", we've just executed an epilogue and we return to the caller
// after this instruction completes executing.
// If there are any instructions past this, there must have been flow control over this
// epilogue so we'll reinstate the original prologue setup instructions.
if (prologue_completed_row.get()
&& pc_reg_num != LLDB_INVALID_REGNUM
&& m_curr_row->GetRegisterInfo (pc_reg_num, pc_regloc)
&& pc_regloc.IsSame())
{
if (log && log->GetVerbose())
log->Printf("UnwindAssemblyInstEmulation::GetNonCallSiteUnwindPlanFromAssembly -- pc is <same>, restore prologue instructions.");
reinstate_prologue_next_instruction = true;
}
else if (prologue_completed_row.get()
&& return_address_register_has_been_saved
&& ra_reg_num != LLDB_INVALID_REGNUM
&& m_curr_row->GetRegisterInfo (ra_reg_num, ra_regloc)
&& ra_regloc.IsSame())
{
if (log && log->GetVerbose())
log->Printf("UnwindAssemblyInstEmulation::GetNonCallSiteUnwindPlanFromAssembly -- lr is <same>, restore prologue instruction if the next instruction is a branch immediate.");
last_instruction_restored_return_addr_reg = true;
}
}
else
{
// If the previous instruction was a return-to-caller (epilogue), and we're still executing
// instructions in this function, there must be a code path that jumps over that epilogue.
// Also detect the case where we epilogue & branch imm to another function (tail-call opt)
// instead of a normal pop lr-into-pc exit.
// Reinstate the frame setup from the prologue.
if (reinstate_prologue_next_instruction
|| (m_curr_insn_is_branch_immediate && last_instruction_restored_return_addr_reg))
{
if (log && log->GetVerbose())
log->Printf("UnwindAssemblyInstEmulation::GetNonCallSiteUnwindPlanFromAssembly -- Reinstating prologue instruction set");
UnwindPlan::Row *newrow = new UnwindPlan::Row;
*newrow = *prologue_completed_row.get();
m_curr_row.reset(newrow);
m_curr_row->SetOffset (inst->GetAddress().GetFileAddress() + inst->GetOpcode().GetByteSize() - base_addr);
unwind_plan.AppendRow(m_curr_row);
newrow = new UnwindPlan::Row;
*newrow = *m_curr_row.get();
m_curr_row.reset(newrow);
reinstate_prologue_next_instruction = false;
last_instruction_restored_return_addr_reg = false;
m_curr_insn_is_branch_immediate = false;
}
// clear both of these if either one wasn't set
if (last_instruction_restored_return_addr_reg)
{
last_instruction_restored_return_addr_reg = false;
}
if (m_curr_insn_is_branch_immediate)
{
m_curr_insn_is_branch_immediate = false;
}
// Stop updating the prologue instructions if we've seen 8 non-prologue instructions
// in a row.
if (instructions_since_last_prologue_insn++ < 8)
{
UnwindPlan::Row *newrow = new UnwindPlan::Row;
*newrow = *m_curr_row.get();
prologue_completed_row.reset(newrow);
if (log && log->GetVerbose())
log->Printf("UnwindAssemblyInstEmulation::GetNonCallSiteUnwindPlanFromAssembly -- saving a copy of the current row as the prologue row.");
}
}
}
}
}
// FIXME: The DisassemblerLLVMC has a reference cycle and won't go away if it has any active instructions.
// I'll fix that but for now, just clear the list and it will go away nicely.
disasm_sp->GetInstructionList().Clear();
}
if (log && log->GetVerbose ())
{
StreamString strm;
lldb::addr_t base_addr = range.GetBaseAddress().GetLoadAddress(thread.CalculateTarget().get());
strm.Printf ("Resulting unwind rows for [0x%" PRIx64 " - 0x%" PRIx64 "):", base_addr, base_addr + range.GetByteSize());
unwind_plan.Dump(strm, &thread, base_addr);
log->PutCString (strm.GetData());
}
return unwind_plan.GetRowCount() > 0;
}
return false;
}