bool BOARD_PRINTOUT_CONTROLLER::OnPrintPage( int aPage )
{
LSET lset = m_PrintParams.m_PrintMaskLayer;
// compute layer mask from page number if we want one page per layer
if( m_PrintParams.m_OptionPrintPage == 0 ) // One page per layer
{
// This sequence is TBD, call a different
// sequencer if needed, such as Seq(). Could not find documentation on
// page order.
LSEQ seq = lset.UIOrder();
// aPage starts at 1, not 0
if( unsigned( aPage-1 ) < seq.size() )
m_PrintParams.m_PrintMaskLayer = LSET( seq[aPage-1] );
}
if( !m_PrintParams.m_PrintMaskLayer.any() )
return false;
// In Pcbnew we can want the layer EDGE always printed
if( m_PrintParams.m_Flags == 1 )
m_PrintParams.m_PrintMaskLayer.set( Edge_Cuts );
DrawPage();
m_PrintParams.m_PrintMaskLayer = lset;
return true;
}
bool BOARD_PRINTOUT_CONTROLLER::OnPrintPage( int aPage )
{
LSET lset = m_PrintParams.m_PrintMaskLayer;
int pageCount = lset.count();
wxString layer;
LAYER_ID extractLayer;
// compute layer mask from page number if we want one page per layer
if( m_PrintParams.m_OptionPrintPage == 0 ) // One page per layer
{
// This sequence is TBD, call a different
// sequencer if needed, such as Seq(). Could not find documentation on
// page order.
LSEQ seq = lset.UIOrder();
// aPage starts at 1, not 0
if( unsigned( aPage-1 ) < seq.size() )
m_PrintParams.m_PrintMaskLayer = LSET( seq[aPage-1] );
}
if( !m_PrintParams.m_PrintMaskLayer.any() )
return false;
extractLayer = m_PrintParams.m_PrintMaskLayer.ExtractLayer();
if( extractLayer == UNDEFINED_LAYER )
layer = _( "Multiple Layers" );
else
layer = LSET::Name( extractLayer );
// In Pcbnew we can want the layer EDGE always printed
if( m_PrintParams.m_Flags == 1 )
m_PrintParams.m_PrintMaskLayer.set( Edge_Cuts );
DrawPage( layer, aPage, pageCount );
m_PrintParams.m_PrintMaskLayer = lset;
return true;
}
void DIALOG_PRINT_USING_PRINTER::initValues( )
{
wxString msg;
BOARD* board = m_parent->GetBoard();
s_Parameters.m_PageSetupData = s_pageSetupData;
// Create layer list.
wxString layerKey;
LSEQ seq = board->GetEnabledLayers().UIOrder();
for( ; seq; ++seq )
{
LAYER_ID layer = *seq;
m_BoxSelectLayer[layer] = new wxCheckBox( this, -1, board->GetLayerName( layer ) );
if( IsCopperLayer( layer ) )
m_CopperLayersBoxSizer->Add( m_BoxSelectLayer[layer],
0, wxGROW | wxALL, 1 );
else
m_TechnicalLayersBoxSizer->Add( m_BoxSelectLayer[layer],
0, wxGROW | wxALL, 1 );
layerKey.Printf( OPTKEY_LAYERBASE, layer );
bool option;
if( m_config->Read( layerKey, &option ) )
m_BoxSelectLayer[layer]->SetValue( option );
else
{
if( s_SelectedLayers[layer] )
m_BoxSelectLayer[layer]->SetValue( true );
}
}
// Option for excluding contents of "Edges Pcb" layer
m_Exclude_Edges_Pcb->Show( true );
// Read the scale adjust option
int scale_idx = 4; // default selected scale = ScaleList[4] = 1.000
if( m_config )
{
m_config->Read( OPTKEY_PRINT_X_FINESCALE_ADJ, &s_Parameters.m_XScaleAdjust );
m_config->Read( OPTKEY_PRINT_Y_FINESCALE_ADJ, &s_Parameters.m_YScaleAdjust );
m_config->Read( OPTKEY_PRINT_SCALE, &scale_idx );
m_config->Read( OPTKEY_PRINT_PAGE_FRAME, &s_Parameters.m_Print_Sheet_Ref, 1);
m_config->Read( OPTKEY_PRINT_MONOCHROME_MODE, &s_Parameters.m_Print_Black_and_White, 1);
m_config->Read( OPTKEY_PRINT_PAGE_PER_LAYER, &s_Parameters.m_OptionPrintPage, 0);
int tmp;
m_config->Read( OPTKEY_PRINT_PADS_DRILL, &tmp, PRINT_PARAMETERS::SMALL_DRILL_SHAPE );
s_Parameters.m_DrillShapeOpt = (PRINT_PARAMETERS::DrillShapeOptT) tmp;
// Test for a reasonnable scale value. Set to 1 if problem
if( s_Parameters.m_XScaleAdjust < MIN_SCALE ||
s_Parameters.m_YScaleAdjust < MIN_SCALE ||
s_Parameters.m_XScaleAdjust > MAX_SCALE ||
s_Parameters.m_YScaleAdjust > MAX_SCALE )
s_Parameters.m_XScaleAdjust = s_Parameters.m_YScaleAdjust = 1.0;
s_SelectedLayers = LSET();
for( seq.Rewind(); seq; ++seq )
{
LAYER_ID layer = *seq;
wxString layerKey;
bool option;
layerKey.Printf( OPTKEY_LAYERBASE, layer );
option = false;
if( m_config->Read( layerKey, &option ) )
{
m_BoxSelectLayer[layer]->SetValue( option );
if( option )
s_SelectedLayers.set( layer );
}
}
}
m_ScaleOption->SetSelection( scale_idx );
scale_idx = m_ScaleOption->GetSelection();
s_Parameters.m_PrintScale = s_ScaleList[scale_idx];
m_Print_Mirror->SetValue(s_Parameters.m_PrintMirror);
m_Exclude_Edges_Pcb->SetValue(m_ExcludeEdgeLayer);
m_Print_Sheet_Ref->SetValue( s_Parameters.m_Print_Sheet_Ref );
// Options to plot pads and vias holes
m_Drill_Shape_Opt->SetSelection( s_Parameters.m_DrillShapeOpt );
if( s_Parameters.m_Print_Black_and_White )
m_ModeColorOption->SetSelection( 1 );
else
m_ModeColorOption->SetSelection( 0 );
m_PagesOption->SetSelection(s_Parameters.m_OptionPrintPage);
s_Parameters.m_PenDefaultSize = g_DrawDefaultLineThickness;
AddUnitSymbol( *m_TextPenWidth, g_UserUnit );
m_DialogPenWidth->SetValue(
StringFromValue( g_UserUnit, s_Parameters.m_PenDefaultSize ) );
// Create scale adjust option
msg.Printf( wxT( "%f" ), s_Parameters.m_XScaleAdjust );
m_FineAdjustXscaleOpt->SetValue( msg );
msg.Printf( wxT( "%f" ), s_Parameters.m_YScaleAdjust );
m_FineAdjustYscaleOpt->SetValue( msg );
bool enable = (s_Parameters.m_PrintScale == 1.0);
m_FineAdjustXscaleOpt->Enable(enable);
m_FineAdjustYscaleOpt->Enable(enable);
}