コード例 #1
0
void
MoveEmitterARM::emitFloat32Move(const MoveOperand& from, const MoveOperand& to)
{
    // Register pairs are used to store Double values during calls.
    MOZ_ASSERT(!from.isGeneralRegPair());
    MOZ_ASSERT(!to.isGeneralRegPair());

    if (from.isFloatReg()) {
        if (to.isFloatReg())
            masm.ma_vmov_f32(from.floatReg(), to.floatReg());
        else if (to.isGeneralReg())
            masm.ma_vxfer(from.floatReg(), to.reg());
        else
            masm.ma_vstr(VFPRegister(from.floatReg()).singleOverlay(), toAddress(to));
    } else if (from.isGeneralReg()) {
        if (to.isFloatReg())
            masm.ma_vxfer(from.reg(), to.floatReg());
        else if (to.isGeneralReg())
            masm.ma_mov(from.reg(), to.reg());
        else
            masm.ma_str(from.reg(), toAddress(to));
    } else if (to.isFloatReg()) {
        masm.ma_vldr(toAddress(from), VFPRegister(to.floatReg()).singleOverlay());
    } else if (to.isGeneralReg()) {
        masm.ma_ldr(toAddress(from), to.reg());
    } else {
        // Memory to memory move.
        MOZ_ASSERT(from.isMemory());
        FloatRegister reg = ScratchFloat32Reg;
        masm.ma_vldr(toAddress(from), VFPRegister(reg).singleOverlay());
        masm.ma_vstr(VFPRegister(reg).singleOverlay(), toAddress(to));
    }
}
コード例 #2
0
void
MoveEmitterARM::emitDoubleMove(const MoveOperand& from, const MoveOperand& to)
{
    // Registers are used to store pointers / int32 / float32 values.
    MOZ_ASSERT(!from.isGeneralReg());
    MOZ_ASSERT(!to.isGeneralReg());

    if (from.isFloatReg()) {
        if (to.isFloatReg())
            masm.ma_vmov(from.floatReg(), to.floatReg());
        else if (to.isGeneralRegPair())
            masm.ma_vxfer(from.floatReg(), to.evenReg(), to.oddReg());
        else
            masm.ma_vstr(from.floatReg(), toAddress(to));
    } else if (from.isGeneralRegPair()) {
        if (to.isFloatReg())
            masm.ma_vxfer(from.evenReg(), from.oddReg(), to.floatReg());
        else if (to.isGeneralRegPair()) {
            MOZ_ASSERT(!from.aliases(to));
            masm.ma_mov(from.evenReg(), to.evenReg());
            masm.ma_mov(from.oddReg(), to.oddReg());
        } else {
            FloatRegister reg = ScratchDoubleReg;
            masm.ma_vxfer(from.evenReg(), from.oddReg(), reg);
            masm.ma_vstr(reg, toAddress(to));
        }
    } else if (to.isFloatReg()) {
        masm.ma_vldr(toAddress(from), to.floatReg());
    } else if (to.isGeneralRegPair()) {
        MOZ_ASSERT(from.isMemory());
        Address src = toAddress(from);
        // Note: We can safely use the MoveOperand's displacement here,
        // even if the base is SP: MoveEmitter::toOperand adjusts
        // SP-relative operands by the difference between the current
        // stack usage and stackAdjust, which emitter.finish() resets to
        // 0.
        //
        // Warning: if the offset isn't within [-255,+255] then this
        // will assert-fail (or, if non-debug, load the wrong words).
        // Nothing uses such an offset at the time of this writing.
        masm.ma_ldrd(EDtrAddr(src.base, EDtrOffImm(src.offset)), to.evenReg(), to.oddReg());
    } else {
        // Memory to memory move.
        MOZ_ASSERT(from.isMemory());
        ScratchDoubleScope scratch(masm);
        masm.ma_vldr(toAddress(from), scratch);
        masm.ma_vstr(scratch, toAddress(to));
    }
}
コード例 #3
0
void
MoveEmitterARM::emitMove(const MoveOperand& from, const MoveOperand& to)
{
    // Register pairs are used to store Double values during calls.
    MOZ_ASSERT(!from.isGeneralRegPair());
    MOZ_ASSERT(!to.isGeneralRegPair());

    if (to.isGeneralReg() && to.reg() == spilledReg_) {
        // If the destination is the spilled register, make sure we
        // don't re-clobber its value.
        spilledReg_ = InvalidReg;
    }

    if (from.isGeneralReg()) {
        if (from.reg() == spilledReg_) {
            // If the source is a register that has been spilled, make sure
            // to load the source back into that register.
            masm.ma_ldr(spillSlot(), spilledReg_);
            spilledReg_ = InvalidReg;
        }
        if (to.isMemoryOrEffectiveAddress())
            masm.ma_str(from.reg(), toAddress(to));
        else
            masm.ma_mov(from.reg(), to.reg());
    } else if (to.isGeneralReg()) {
        MOZ_ASSERT(from.isMemoryOrEffectiveAddress());
        if (from.isMemory())
            masm.ma_ldr(toAddress(from), to.reg());
        else
            masm.ma_add(from.base(), Imm32(from.disp()), to.reg());
    } else {
        // Memory to memory gpr move.
        Register reg = tempReg();

        MOZ_ASSERT(from.isMemoryOrEffectiveAddress());
        if (from.isMemory())
            masm.ma_ldr(toAddress(from), reg);
        else
            masm.ma_add(from.base(), Imm32(from.disp()), reg);
        MOZ_ASSERT(to.base() != reg);
        masm.ma_str(reg, toAddress(to));
    }
}
コード例 #4
0
void
MoveEmitterARM::breakCycle(const MoveOperand& from, const MoveOperand& to,
                           MoveOp::Type type, uint32_t slotId)
{
    // There is some pattern:
    //   (A -> B)
    //   (B -> A)
    //
    // This case handles (A -> B), which we reach first. We save B, then allow
    // the original move to continue.
    switch (type) {
      case MoveOp::FLOAT32:
        if (to.isMemory()) {
            VFPRegister temp = ScratchFloat32Reg;
            masm.ma_vldr(toAddress(to), temp);
            // Since it is uncertain if the load will be aligned or not
            // just fill both of them with the same value.
            masm.ma_vstr(temp, cycleSlot(slotId, 0));
            masm.ma_vstr(temp, cycleSlot(slotId, 4));
        } else if (to.isGeneralReg()) {
            // Since it is uncertain if the load will be aligned or not
            // just fill both of them with the same value.
            masm.ma_str(to.reg(), cycleSlot(slotId, 0));
            masm.ma_str(to.reg(), cycleSlot(slotId, 4));
        } else {
            FloatRegister src = to.floatReg();
            // Just always store the largest possible size. Currently, this is
            // a double. When SIMD is added, two doubles will need to be stored.
            masm.ma_vstr(src.doubleOverlay(), cycleSlot(slotId, 0));
        }
        break;
      case MoveOp::DOUBLE:
        if (to.isMemory()) {
            ScratchDoubleScope scratch(masm);
            masm.ma_vldr(toAddress(to), scratch);
            masm.ma_vstr(scratch, cycleSlot(slotId, 0));
        } else if (to.isGeneralRegPair()) {
            ScratchDoubleScope scratch(masm);
            masm.ma_vxfer(to.evenReg(), to.oddReg(), scratch);
            masm.ma_vstr(scratch, cycleSlot(slotId, 0));
        } else {
            masm.ma_vstr(to.floatReg().doubleOverlay(), cycleSlot(slotId, 0));
        }
        break;
      case MoveOp::INT32:
      case MoveOp::GENERAL:
        // an non-vfp value
        if (to.isMemory()) {
            Register temp = tempReg();
            masm.ma_ldr(toAddress(to), temp);
            masm.ma_str(temp, cycleSlot(0,0));
        } else {
            if (to.reg() == spilledReg_) {
                // If the destination was spilled, restore it first.
                masm.ma_ldr(spillSlot(), spilledReg_);
                spilledReg_ = InvalidReg;
            }
            masm.ma_str(to.reg(), cycleSlot(0,0));
        }
        break;
      default:
        MOZ_CRASH("Unexpected move type");
    }
}
コード例 #5
0
void
MoveEmitterARM::completeCycle(const MoveOperand& from, const MoveOperand& to, MoveOp::Type type, uint32_t slotId)
{
    // There is some pattern:
    //   (A -> B)
    //   (B -> A)
    //
    // This case handles (B -> A), which we reach last. We emit a move from the
    // saved value of B, to A.
    switch (type) {
      case MoveOp::FLOAT32:
        MOZ_ASSERT(!to.isGeneralRegPair());
        if (to.isMemory()) {
            ScratchFloat32Scope scratch(masm);
            masm.ma_vldr(cycleSlot(slotId, 0), scratch);
            masm.ma_vstr(scratch, toAddress(to));
        } else if (to.isGeneralReg()) {
            MOZ_ASSERT(type == MoveOp::FLOAT32);
            masm.ma_ldr(toAddress(from), to.reg());
        } else {
            uint32_t offset = 0;
            if ((!from.isMemory()) && from.floatReg().numAlignedAliased() == 1)
                offset = sizeof(float);
            masm.ma_vldr(cycleSlot(slotId, offset), to.floatReg());
        }
        break;
      case MoveOp::DOUBLE:
        MOZ_ASSERT(!to.isGeneralReg());
        if (to.isMemory()) {
            ScratchDoubleScope scratch(masm);
            masm.ma_vldr(cycleSlot(slotId, 0), scratch);
            masm.ma_vstr(scratch, toAddress(to));
        } else if (to.isGeneralRegPair()) {
            MOZ_ASSERT(type == MoveOp::DOUBLE);
            ScratchDoubleScope scratch(masm);
            masm.ma_vldr(toAddress(from), scratch);
            masm.ma_vxfer(scratch, to.evenReg(), to.oddReg());
        } else {
            uint32_t offset = 0;
            if ((!from.isMemory()) && from.floatReg().numAlignedAliased() == 1)
                offset = sizeof(float);
            masm.ma_vldr(cycleSlot(slotId, offset), to.floatReg());
        }
        break;
      case MoveOp::INT32:
      case MoveOp::GENERAL:
        MOZ_ASSERT(slotId == 0);
        if (to.isMemory()) {
            Register temp = tempReg();
            masm.ma_ldr(cycleSlot(slotId, 0), temp);
            masm.ma_str(temp, toAddress(to));
        } else {
            if (to.reg() == spilledReg_) {
                // Make sure we don't re-clobber the spilled register later.
                spilledReg_ = InvalidReg;
            }
            masm.ma_ldr(cycleSlot(slotId, 0), to.reg());
        }
        break;
      default:
        MOZ_CRASH("Unexpected move type");
    }
}