/**
* Create a model that does nothing.
*/
int main()
{
try {
///////////////////////////////////////////
// DEFINE BODIES AND JOINTS OF THE MODEL //
///////////////////////////////////////////
// Create an OpenSim model and set its name
Model osimModel;
osimModel.setName("tugOfWar");
// GROUND BODY
// Get a reference to the model's ground body
Ground& ground = osimModel.updGround();
// Add display geometry to the ground to visualize in the GUI
ground.addMeshGeometry("ground.vtp");
ground.addMeshGeometry("anchor1.vtp");
ground.addMeshGeometry("anchor2.vtp");
// BLOCK BODY
// Specify properties of a 20 kg, 0.1 m^3 block body
double blockMass = 20.0, blockSideLength = 0.1;
Vec3 blockMassCenter(0);
Inertia blockInertia = blockMass*Inertia::brick(blockSideLength, blockSideLength, blockSideLength);
// Create a new block body with the specified properties
OpenSim::Body *block = new OpenSim::Body("block", blockMass, blockMassCenter, blockInertia);
// Add display geometry to the block to visualize in the GUI
Brick brick(SimTK::Vec3(0.05, 0.05, 0.05));
block->addGeometry(brick);
// FREE JOINT
// Create a new free joint with 6 degrees-of-freedom (coordinates) between the block and ground bodies
Vec3 locationInParent(0, blockSideLength/2, 0), orientationInParent(0), locationInBody(0), orientationInBody(0);
FreeJoint *blockToGround = new FreeJoint("blockToGround", ground, locationInParent, orientationInParent, *block, locationInBody, orientationInBody);
// Get a reference to the coordinate set (6 degrees-of-freedom) between the block and ground bodies
CoordinateSet& jointCoordinateSet = blockToGround->upd_CoordinateSet();
// Set the angle and position ranges for the coordinate set
double angleRange[2] = {-SimTK::Pi/2, SimTK::Pi/2};
double positionRange[2] = {-1, 1};
jointCoordinateSet[0].setRange(angleRange);
jointCoordinateSet[1].setRange(angleRange);
jointCoordinateSet[2].setRange(angleRange);
jointCoordinateSet[3].setRange(positionRange);
jointCoordinateSet[4].setRange(positionRange);
jointCoordinateSet[5].setRange(positionRange);
// Add the block body to the model
osimModel.addBody(block);
osimModel.addJoint(blockToGround);
///////////////////////////////////////////////
// DEFINE THE SIMULATION START AND END TIMES //
///////////////////////////////////////////////
// Define the initial and final simulation times
double initialTime = 0.0;
double finalTime = 3.00;
/////////////////////////////////////////////
// DEFINE CONSTRAINTS IMPOSED ON THE MODEL //
/////////////////////////////////////////////
// Specify properties of a constant distance constraint to limit the block's motion
double distance = 0.2;
Vec3 pointOnGround(0, blockSideLength/2 ,0);
Vec3 pointOnBlock(0, 0, 0);
// Create a new constant distance constraint
ConstantDistanceConstraint *constDist = new ConstantDistanceConstraint(ground,
pointOnGround, *block, pointOnBlock, distance);
// Add the new point on a line constraint to the model
osimModel.addConstraint(constDist);
///////////////////////////////////////
// DEFINE FORCES ACTING ON THE MODEL //
///////////////////////////////////////
// GRAVITY
// Obtaine the default acceleration due to gravity
Vec3 gravity = osimModel.getGravity();
// MUSCLE FORCES
// Create two new muscles with identical properties
double maxIsometricForce = 1000.0, optimalFiberLength = 0.25, tendonSlackLength = 0.1, pennationAngle = 0.0;
Thelen2003Muscle *muscle1 = new Thelen2003Muscle("muscle1",maxIsometricForce,optimalFiberLength,tendonSlackLength,pennationAngle);
Thelen2003Muscle *muscle2 = new Thelen2003Muscle("muscle2",maxIsometricForce,optimalFiberLength,tendonSlackLength,pennationAngle);
// Specify the paths for the two muscles
// Path for muscle 1
muscle1->addNewPathPoint("muscle1-point1", ground, Vec3(0.0,0.05,-0.35));
muscle1->addNewPathPoint("muscle1-point2", *block, Vec3(0.0,0.0,-0.05));
// Path for muscle 2
muscle2->addNewPathPoint("muscle2-point1", ground, Vec3(0.0,0.05,0.35));
muscle2->addNewPathPoint("muscle2-point2", *block, Vec3(0.0,0.0,0.05));
// Add the two muscles (as forces) to the model
osimModel.addForce(muscle1);
osimModel.addForce(muscle2);
// PRESCRIBED FORCE
// Create a new prescribed force to be applied to the block
PrescribedForce *prescribedForce = new PrescribedForce(block);
prescribedForce->setName("prescribedForce");
// Specify properties of the force function to be applied to the block
double time[2] = {0, finalTime}; // time nodes for linear function
double fXofT[2] = {0, -blockMass*gravity[1]*3.0}; // force values at t1 and t2
// Create linear function for the force components
PiecewiseLinearFunction *forceX = new PiecewiseLinearFunction(2, time, fXofT);
// Set the force and point functions for the new prescribed force
prescribedForce->setForceFunctions(forceX, new Constant(0.0), new Constant(0.0));
prescribedForce->setPointFunctions(new Constant(0.0), new Constant(0.0), new Constant(0.0));
// Add the new prescribed force to the model
osimModel.addForce(prescribedForce);
///////////////////////////////////
// DEFINE CONTROLS FOR THE MODEL //
///////////////////////////////////
// Create a prescribed controller that simply applies controls as function of time
// For muscles, controls are normalized motor-neuron excitations
PrescribedController *muscleController = new PrescribedController();
muscleController->setActuators(osimModel.updActuators());
// Define linear functions for the control values for the two muscles
Array<double> slopeAndIntercept1(0.0, 2); // array of 2 doubles
Array<double> slopeAndIntercept2(0.0, 2);
// muscle1 control has slope of -1 starting 1 at t = 0
slopeAndIntercept1[0] = -1.0/(finalTime-initialTime);
slopeAndIntercept1[1] = 1.0;
// muscle2 control has slope of 0.95 starting 0.05 at t = 0
slopeAndIntercept2[0] = 0.95/(finalTime-initialTime);
slopeAndIntercept2[1] = 0.05;
// Set the indiviudal muscle control functions for the prescribed muscle controller
muscleController->prescribeControlForActuator("muscle1", new LinearFunction(slopeAndIntercept1));
muscleController->prescribeControlForActuator("muscle2", new LinearFunction(slopeAndIntercept2));
// Add the muscle controller to the model
osimModel.addController(muscleController);
///////////////////////////////////
// SPECIFY MODEL DEFAULT STATES //
///////////////////////////////////
// Define the default states for the two muscles
// Activation
muscle1->setDefaultActivation(slopeAndIntercept1[1]);
muscle2->setDefaultActivation(slopeAndIntercept2[1]);
// Fiber length
muscle2->setDefaultFiberLength(optimalFiberLength);
muscle1->setDefaultFiberLength(optimalFiberLength);
// Save the model to a file
osimModel.print("tugOfWar_model.osim");
//////////////////////////
// PERFORM A SIMULATION //
/////////////////////////
//osimModel.setUseVisualizer(true);
// Initialize the system and get the default state
SimTK::State& si = osimModel.initSystem();
// Define non-zero (defaults are 0) states for the free joint
CoordinateSet& modelCoordinateSet = osimModel.updCoordinateSet();
modelCoordinateSet[3].setValue(si, distance); // set x-translation value
modelCoordinateSet[5].setValue(si, 0.0); // set z-translation value
modelCoordinateSet[3].setSpeedValue(si, 0.0); // set x-speed value
double h_start = 0.5;
modelCoordinateSet[4].setValue(si, h_start); // set y-translation which is height
std::cout << "Start height = "<< h_start << std::endl;
osimModel.getMultibodySystem().realize(si, Stage::Velocity);
// Compute initial conditions for muscles
osimModel.equilibrateMuscles(si);
double mfv1 = muscle1->getFiberVelocity(si);
double mfv2 = muscle2->getFiberVelocity(si);
// Create the force reporter for obtaining the forces applied to the model
// during a forward simulation
ForceReporter* reporter = new ForceReporter(&osimModel);
osimModel.addAnalysis(reporter);
// Create the integrator for integrating system dynamics
SimTK::RungeKuttaMersonIntegrator integrator(osimModel.getMultibodySystem());
integrator.setAccuracy(1.0e-6);
// Create the manager managing the forward integration and its outputs
Manager manager(osimModel, integrator);
// Integrate from initial time to final time
manager.setInitialTime(initialTime);
manager.setFinalTime(finalTime);
std::cout<<"\nIntegrating from "<<initialTime<<" to "<<finalTime<<std::endl;
manager.integrate(si);
}
catch (const std::exception& ex)
{
std::cerr << ex.what() << std::endl;
return 1;
}
catch (...)
{
std::cerr << "UNRECOGNIZED EXCEPTION" << std::endl;
return 1;
}
std::cout << "OpenSim environment test completed successfully. You should see a block attached to two muscles visualized in a separate window." << std::endl;
return 0;
}
/**
* Run a simulation of block sliding with contact on by two muscles sliding with contact
*/
int main()
{
clock_t startTime = clock();
try {
//////////////////////
// MODEL PARAMETERS //
//////////////////////
// Specify body mass of a 20 kg, 0.1m sides of cubed block body
double blockMass = 20.0, blockSideLength = 0.1;
// Constant distance of constraint to limit the block's motion
double constantDistance = 0.2;
// Contact parameters
double stiffness = 1.0e7, dissipation = 0.1, friction = 0.2, viscosity=0.01;
///////////////////////////////////////////
// DEFINE BODIES AND JOINTS OF THE MODEL //
///////////////////////////////////////////
// Create an OpenSim model and set its name
Model osimModel;
osimModel.setName("tugOfWar");
// GROUND BODY
// Get a reference to the model's ground body
OpenSim::Body& ground = osimModel.getGroundBody();
// Add display geometry to the ground to visualize in the Visualizer and GUI
// add a checkered floor
ground.addDisplayGeometry("checkered_floor.vtp");
// add anchors for the muscles to be fixed too
ground.addDisplayGeometry("block.vtp");
ground.addDisplayGeometry("block.vtp");
// block is 0.1 by 0.1 by 0.1m cube and centered at origin.
// transform anchors to be placed at the two extremes of the sliding block (to come)
GeometrySet& geometry = ground.updDisplayer()->updGeometrySet();
DisplayGeometry& anchor1 = geometry[1];
DisplayGeometry& anchor2 = geometry[2];
// scale the anchors
anchor1.setScaleFactors(Vec3(5, 1, 1));
anchor2.setScaleFactors(Vec3(5, 1, 1));
// reposition the anchors
anchor1.setTransform(Transform(Vec3(0, 0.05, 0.35)));
anchor2.setTransform(Transform(Vec3(0, 0.05, -0.35)));
// BLOCK BODY
Vec3 blockMassCenter(0);
Inertia blockInertia = blockMass*Inertia::brick(blockSideLength, blockSideLength, blockSideLength);
// Create a new block body with the specified properties
OpenSim::Body *block = new OpenSim::Body("block", blockMass, blockMassCenter, blockInertia);
// Add display geometry to the block to visualize in the GUI
block->addDisplayGeometry("block.vtp");
// FREE JOINT
// Create a new free joint with 6 degrees-of-freedom (coordinates) between the block and ground bodies
Vec3 locationInParent(0, blockSideLength/2, 0), orientationInParent(0), locationInBody(0), orientationInBody(0);
FreeJoint *blockToGround = new FreeJoint("blockToGround", ground, locationInParent, orientationInParent, *block, locationInBody, orientationInBody);
// Get a reference to the coordinate set (6 degrees-of-freedom) between the block and ground bodies
CoordinateSet& jointCoordinateSet = blockToGround->upd_CoordinateSet();
// Set the angle and position ranges for the coordinate set
double angleRange[2] = {-SimTK::Pi/2, SimTK::Pi/2};
double positionRange[2] = {-1, 1};
jointCoordinateSet[0].setRange(angleRange);
jointCoordinateSet[1].setRange(angleRange);
jointCoordinateSet[2].setRange(angleRange);
jointCoordinateSet[3].setRange(positionRange);
jointCoordinateSet[4].setRange(positionRange);
jointCoordinateSet[5].setRange(positionRange);
// GRAVITY
// Obtaine the default acceleration due to gravity
Vec3 gravity = osimModel.getGravity();
// Define non-zero default states for the free joint
jointCoordinateSet[3].setDefaultValue(constantDistance); // set x-translation value
double h_start = blockMass*gravity[1]/(stiffness*blockSideLength*blockSideLength);
jointCoordinateSet[4].setDefaultValue(h_start); // set y-translation which is height
// Add the block and joint to the model
osimModel.addBody(block);
osimModel.addJoint(blockToGround);
///////////////////////////////////////////////
// DEFINE THE SIMULATION START AND END TIMES //
///////////////////////////////////////////////
// Define the initial and final simulation times
double initialTime = 0.0;
double finalTime = 3.00;
/////////////////////////////////////////////
// DEFINE CONSTRAINTS IMPOSED ON THE MODEL //
/////////////////////////////////////////////
Vec3 pointOnGround(0, blockSideLength/2 ,0);
Vec3 pointOnBlock(0, 0, 0);
// Create a new constant distance constraint
ConstantDistanceConstraint *constDist =
new ConstantDistanceConstraint(ground,
pointOnGround, *block, pointOnBlock, constantDistance);
// Add the new point on a line constraint to the model
osimModel.addConstraint(constDist);
///////////////////////////////////////
// DEFINE FORCES ACTING ON THE MODEL //
///////////////////////////////////////
// MUSCLE FORCES
// Create two new muscles with identical properties
double maxIsometricForce = 1000.0, optimalFiberLength = 0.25, tendonSlackLength = 0.1, pennationAngle = 0.0;
Thelen2003Muscle *muscle1 = new Thelen2003Muscle("muscle1",maxIsometricForce,optimalFiberLength,tendonSlackLength,pennationAngle);
Thelen2003Muscle *muscle2 = new Thelen2003Muscle("muscle2",maxIsometricForce,optimalFiberLength,tendonSlackLength,pennationAngle);
// Specify the paths for the two muscles
// Path for muscle 1
muscle1->addNewPathPoint("muscle1-point1", ground, Vec3(0.0,0.05,-0.35));
muscle1->addNewPathPoint("muscle1-point2", *block, Vec3(0.0,0.0,-0.05));
// Path for muscle 2
muscle2->addNewPathPoint("muscle2-point1", ground, Vec3(0.0,0.05,0.35));
muscle2->addNewPathPoint("muscle2-point2", *block, Vec3(0.0,0.0,0.05));
// Add the two muscles (as forces) to the model
osimModel.addForce(muscle1);
osimModel.addForce(muscle2);
// CONTACT FORCE
// Define contact geometry
// Create new floor contact halfspace
ContactHalfSpace *floor = new ContactHalfSpace(SimTK::Vec3(0), SimTK::Vec3(0, 0, -0.5*SimTK_PI), ground, "floor");
// Create new cube contact mesh
OpenSim::ContactMesh *cube = new OpenSim::ContactMesh("blockMesh.obj", SimTK::Vec3(0), SimTK::Vec3(0), *block, "cube");
// Add contact geometry to the model
osimModel.addContactGeometry(floor);
osimModel.addContactGeometry(cube);
// Define contact parameters for elastic foundation force
OpenSim::ElasticFoundationForce::ContactParameters *contactParams =
new OpenSim::ElasticFoundationForce::ContactParameters(stiffness, dissipation, friction, friction, viscosity);
contactParams->addGeometry("cube");
contactParams->addGeometry("floor");
// Create a new elastic foundation (contact) force between the floor and cube.
OpenSim::ElasticFoundationForce *contactForce = new OpenSim::ElasticFoundationForce(contactParams);
contactForce->setName("contactForce");
// Add the new elastic foundation force to the model
osimModel.addForce(contactForce);
// PRESCRIBED FORCE
// Create a new prescribed force to be applied to the block
PrescribedForce *prescribedForce = new PrescribedForce(block);
prescribedForce->setName("prescribedForce");
// Specify properties of the force function to be applied to the block
double time[2] = {0, finalTime}; // time nodes for linear function
double fXofT[2] = {0, -blockMass*gravity[1]*3.0}; // force values at t1 and t2
// Create linear function for the force components
PiecewiseLinearFunction *forceX = new PiecewiseLinearFunction(2, time, fXofT);
// Set the force and point functions for the new prescribed force
prescribedForce->setForceFunctions(forceX, new Constant(0.0), new Constant(0.0));
prescribedForce->setPointFunctions(new Constant(0.0), new Constant(0.0), new Constant(0.0));
// Add the new prescribed force to the model
osimModel.addForce(prescribedForce);
///////////////////////////////////
// DEFINE CONTROLS FOR THE MODEL //
///////////////////////////////////
// Create a prescribed controller that simply applies controls as function of time
// For muscles, controls are normalized motor-neuron excitations
PrescribedController *muscleController = new PrescribedController();
muscleController->setActuators(osimModel.updActuators());
// Define linear functions for the control values for the two muscles
Array<double> slopeAndIntercept1(0.0, 2); // array of 2 doubles
Array<double> slopeAndIntercept2(0.0, 2);
// muscle1 control has slope of -1 starting 1 at t = 0
slopeAndIntercept1[0] = -1.0/(finalTime-initialTime); slopeAndIntercept1[1] = 1.0;
// muscle2 control has slope of 0.95 starting 0.05 at t = 0
slopeAndIntercept2[0] = 0.95/(finalTime-initialTime); slopeAndIntercept2[1] = 0.05;
// Set the indiviudal muscle control functions for the prescribed muscle controller
muscleController->prescribeControlForActuator("muscle1", new LinearFunction(slopeAndIntercept1));
muscleController->prescribeControlForActuator("muscle2", new LinearFunction(slopeAndIntercept2));
// Add the muscle controller to the model
osimModel.addController(muscleController);
///////////////////////////////////
// SPECIFY MODEL DEFAULT STATES //
///////////////////////////////////
// Define the default states for the two muscles
// Activation
muscle1->setDefaultActivation(slopeAndIntercept1[1]);
muscle2->setDefaultActivation(slopeAndIntercept2[1]);
// Fiber length
muscle2->setDefaultFiberLength(optimalFiberLength);
muscle1->setDefaultFiberLength(optimalFiberLength);
// Save the model to a file
osimModel.print("tugOfWar_model.osim");
//////////////////////////
// PERFORM A SIMULATION //
//////////////////////////
// set use visualizer to true to visualize the simulation live
osimModel.setUseVisualizer(false);
// Initialize the system and get the default state
SimTK::State& si = osimModel.initSystem();
// Enable constraint consistent with current configuration of the model
constDist->setDisabled(si, false);
cout << "Start height = "<< h_start << endl;
osimModel.getMultibodySystem().realize(si, Stage::Velocity);
// Compute initial conditions for muscles
osimModel.equilibrateMuscles(si);
double mfv1 = muscle1->getFiberVelocity(si);
double mfv2 = muscle2->getFiberVelocity(si);
// Create the force reporter for obtaining the forces applied to the model
// during a forward simulation
ForceReporter* reporter = new ForceReporter(&osimModel);
osimModel.addAnalysis(reporter);
// Create the integrator for integrating system dynamics
SimTK::RungeKuttaMersonIntegrator integrator(osimModel.getMultibodySystem());
integrator.setAccuracy(1.0e-6);
// Create the manager managing the forward integration and its outputs
Manager manager(osimModel, integrator);
// Print out details of the model
osimModel.printDetailedInfo(si, cout);
// Integrate from initial time to final time
manager.setInitialTime(initialTime);
manager.setFinalTime(finalTime);
cout<<"\nIntegrating from "<<initialTime<<" to "<<finalTime<<endl;
manager.integrate(si);
//////////////////////////////
// SAVE THE RESULTS TO FILE //
//////////////////////////////
// Save the model states from forward integration
Storage statesDegrees(manager.getStateStorage());
statesDegrees.print("tugOfWar_states.sto");
// Save the forces
reporter->getForceStorage().print("tugOfWar_forces.mot");
}
catch (const std::exception& ex)
{
cerr << ex.what() << endl;
return 1;
}
catch (...)
{
cerr << "UNRECOGNIZED EXCEPTION" << endl;
return 1;
}
cout << "main() routine time = " << 1.e3*(clock()-startTime)/CLOCKS_PER_SEC << "ms\n";
cout << "OpenSim example completed successfully." << endl;
return 0;
}
