コード例 #1
0
void S60AudioEncoderControl::setAudioSettings(const QAudioEncoderSettings &settings)
{
    QAudioFormat fmt = m_session->format();
    if (settings.encodingMode() == QtMultimediaKit::ConstantQualityEncoding) {
        fmt.setCodec(settings.codec());
        setQuality(settings.quality(), fmt);
        if (settings.sampleRate() > 0) {
            fmt.setFrequency(settings.sampleRate());
        }
        if (settings.channelCount() > 0)
            fmt.setChannels(settings.channelCount());
    }else {
        if (settings.sampleRate() == 8000) {
            fmt.setSampleType(QAudioFormat::UnSignedInt);
            fmt.setSampleSize(8);
        } else {
            fmt.setSampleType(QAudioFormat::SignedInt);
            fmt.setSampleSize(16);
        }
        fmt.setCodec(settings.codec());
        fmt.setFrequency(settings.sampleRate());
        fmt.setChannels(settings.channelCount());
    }
    m_session->setFormat(fmt);
    m_settings = settings;
}
コード例 #2
0
ファイル: ClassAirplay.cpp プロジェクト: kevindoveton/carpc
void Airplay :: start()
{
	// read the airplay pipe
	file.setFileName("/tmp/shairport-sync-pipe");
	file.open(QIODevice::ReadOnly);

	// set the audio format
	// https://github.com/mikebrady/shairport-sync/issues/126
	// Playing raw data 'stdin' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
	QAudioFormat format;
	format.setSampleRate(44100); // rate
	format.setChannelCount(2); // stereo
	format.setCodec("audio/pcm"); // raw
	format.setSampleSize(16); // 16 bit
	format.setByteOrder(QAudioFormat::LittleEndian);
	format.setSampleType(QAudioFormat::SignedInt);

	// check format is supported
	if (!deviceInfo.isFormatSupported(format))
		qWarning() << "Output format not supported";

	// connect signals
	audio = new QAudioOutput(deviceInfo, format, this);
	connect(audio, SIGNAL(stateChanged(QAudio::State)), this, SLOT(handleStateChange(QAudio::State)));

	// start playing
	audio->start(&file);
}
コード例 #3
0
BeatController::BeatController(QAudioDeviceInfo inputDevice, uint16_t recordSize, uint32_t sampleRate, uint16_t m_bandCount, QObject *parent) : QObject(parent)
{
    m_RecordSize = recordSize;
    m_Buffer = new SoundBuffer(recordSize);
    m_Analyser = new BeatAnalyser(m_bandCount,sampleRate,recordSize);
    m_inputDevice = QAudioDeviceInfo(inputDevice);

    m_FFT = new FFT(recordSize);
    m_FFT->setSoundBuffer(m_Buffer);
    m_Analyser->setFFT(m_FFT);

    QAudioFormat audioFormat;
    audioFormat.setSampleRate(sampleRate);
    audioFormat.setChannelCount(1);
    audioFormat.setSampleSize(16);
    audioFormat.setSampleType(QAudioFormat::SignedInt);
    audioFormat.setByteOrder(QAudioFormat::LittleEndian);
    audioFormat.setCodec("audio/pcm");

    //QAudioDeviceInfo info(QAudioDeviceInfo::defaultInputDevice());

    if (!m_inputDevice.isFormatSupported(audioFormat)) {
        qWarning() << "Default format not supported - trying to use nearest";
        audioFormat = m_inputDevice.nearestFormat(audioFormat);
    }

    m_audioInput = new QAudioInput(m_inputDevice, audioFormat, this);
    m_ioDevice = m_audioInput->start();
    connect(m_ioDevice, SIGNAL(readyRead()), this, SLOT(readAudio()));

}
コード例 #4
0
void RtpAudioStream::startPlaying()
{
    if (audio_output_) return;

    QAudioFormat format;
    format.setSampleRate(audio_out_rate_);
    format.setSampleSize(sample_bytes_ * 8); // bits
    format.setSampleType(QAudioFormat::SignedInt);
    format.setChannelCount(1);
    format.setCodec("audio/pcm");

    // RTP_STREAM_DEBUG("playing %s %d samples @ %u Hz",
    //                 tempfile_->fileName().toUtf8().constData(),
    //                 (int) tempfile_->size(), audio_out_rate_);

    audio_output_ = new QAudioOutput(format, this);
    audio_output_->setNotifyInterval(65); // ~15 fps
    connect(audio_output_, SIGNAL(stateChanged(QAudio::State)), this, SLOT(outputStateChanged()));
    connect(audio_output_, SIGNAL(notify()), this, SLOT(outputNotify()));
    tempfile_->seek(0);
    audio_output_->start(tempfile_);
    emit startedPlaying();
    // QTBUG-6548 StoppedState is not always emitted on error, force a cleanup
    // in case playback fails immediately.
    if (audio_output_ && audio_output_->state() == QAudio::StoppedState) {
        outputStateChanged();
    }
}
コード例 #5
0
ファイル: main.cpp プロジェクト: qyvlik/AudioTestByFFmpeg
int test_2()
{
    qyvlik::FFmpegStream* ffmpegStream = new qyvlik::FFmpegStream();

    QAudioFormat format;
    // Set up the format, eg.

    format.setSampleRate(44100);
    format.setChannelCount(2);
    format.setCodec("audio/pcm");
    format.setSampleType(QAudioFormat::SignedInt);
    format.setSampleSize(16);
    format.setByteOrder(QAudioFormat::LittleEndian);

    QAudioDeviceInfo info(QAudioDeviceInfo::defaultOutputDevice());
    if (!info.isFormatSupported(format)) {
        qDebug() << "Raw audio format not supported by backend, cannot play audio.";
        return -1;
    }

    ffmpegStream->setFileName("E:/Test/1.mp3");

    QAudioOutput *audio;
    audio = new QAudioOutput(format);
    audio->start(ffmpegStream);

    qDebug() << "Play Finished~";

}
コード例 #6
0
ファイル: AudioProcessorQt.cpp プロジェクト: ikeboy/mgba
void AudioProcessorQt::start() {
	if (!input()) {
		return;
	}

	if (!m_device) {
		m_device = new AudioDevice(this);
	}

	if (!m_audioOutput) {
		QAudioFormat format;
		format.setSampleRate(44100);
		format.setChannelCount(2);
		format.setSampleSize(16);
		format.setCodec("audio/pcm");
		format.setByteOrder(QAudioFormat::LittleEndian);
		format.setSampleType(QAudioFormat::SignedInt);

		m_audioOutput = new QAudioOutput(format, this);
		m_audioOutput->setCategory("game");
	}

	m_device->setInput(input());
	m_device->setFormat(m_audioOutput->format());
	m_audioOutput->setBufferSize(input()->audioBuffers * 4);

	m_audioOutput->start(m_device);
}
コード例 #7
0
FrequencyAnalyzer::FrequencyAnalyzer(QObject *parent) :
    QObject(parent),
    d_ptr(new FrequencyAnalyzerPrivate(this))
{
    Q_D(FrequencyAnalyzer);

    QAudioDeviceInfo info = QAudioDeviceInfo::defaultInputDevice();

    qDebug() << "device name: " << info.deviceName() << "\n"
             << "supported frequency:" << info.supportedFrequencies() << "\n"
             << "supported codecs" << info.supportedCodecs() << "\n"
             << "supported sample sizes" << info.supportedSampleSizes() << "\n"
             << "supported sample types" << info.supportedSampleTypes() << "\n";

    QAudioFormat format = info.preferredFormat();
    format.setCodec("audio/pcm");
    format.setByteOrder(QAudioFormat::LittleEndian);
    format.setSampleType(QAudioFormat::SignedInt);
    format.setSampleSize(32);
    //format.setFrequency(d->sampling = 11025);
    //format.setFrequency(d->sampling = 22050);
    format.setFrequency(d->sampling = info.supportedFrequencies().last());
    format.setChannelCount(1);

    if (!info.isFormatSupported(format)) {
        qWarning("Format is unsupported");
        return;
    }

    d->input = new QAudioInput(info, format, this);
    connect(d->input, SIGNAL(stateChanged(QAudio::State)), SLOT(_q_onStateChanged()));
}
コード例 #8
0
ファイル: xmppClient.cpp プロジェクト: berndhs/qxmpp
void xmppClient::slotConnected()
{
    QXmppCall *call = qobject_cast<QXmppCall*>(sender());
    Q_ASSERT(call);

    qDebug() << "Call connected";
    QXmppRtpChannel *channel = call->audioChannel();

    // prepare audio format
    QAudioFormat format;
    format.setFrequency(channel->payloadType().clockrate());
    format.setChannels(channel->payloadType().channels());
    format.setSampleSize(16);
    format.setCodec("audio/pcm");
    format.setByteOrder(QAudioFormat::LittleEndian);
    format.setSampleType(QAudioFormat::SignedInt);

    // the size in bytes of the audio buffers to/from sound devices
    // 160 ms seems to be the minimum to work consistently on Linux/Mac/Windows
    const int bufferSize = (format.frequency() * format.channels() * (format.sampleSize() / 8) * 160) / 1000;

    // initialise audio output
    QAudioOutput *audioOutput = new QAudioOutput(format, this);
    audioOutput->setBufferSize(bufferSize);
    audioOutput->start(channel);

    // initialise audio input
    QAudioInput *audioInput = new QAudioInput(format, this);
    audioInput->setBufferSize(bufferSize);
    audioInput->start(channel);
}
コード例 #9
0
ファイル: qaudiodeviceinfo.cpp プロジェクト: maxxant/qt
QAudioFormat QAudioDeviceInfo::nearestFormat(const QAudioFormat &settings) const
{
    if (isFormatSupported(settings))
        return settings;

    QAudioFormat nearest = settings;

    nearest.setCodec(QLatin1String("audio/pcm"));

    if (nearest.sampleType() == QAudioFormat::Unknown) {
        QAudioFormat preferred = preferredFormat();
        nearest.setSampleType(preferred.sampleType());
    }

    QMap<int,int> testFrequencies;
    QList<int> frequenciesAvailable = supportedFrequencies();
    QMap<int,int> testSampleSizes;
    QList<int> sampleSizesAvailable = supportedSampleSizes();

    // Get sorted sampleSizes (equal to and ascending values only)
    if (sampleSizesAvailable.contains(settings.sampleSize()))
        testSampleSizes.insert(0,settings.sampleSize());
    sampleSizesAvailable.removeAll(settings.sampleSize());
    foreach (int size, sampleSizesAvailable) {
        int larger  = (size > settings.sampleSize()) ? size : settings.sampleSize();
        int smaller = (size > settings.sampleSize()) ? settings.sampleSize() : size;
        if (size >= settings.sampleSize()) {
            int diff = larger - smaller;
            testSampleSizes.insert(diff, size);
        }
    }
コード例 #10
0
ファイル: audiodecoder.cpp プロジェクト: MarianMMX/MarianMMX
AudioDecoder::AudioDecoder(bool isPlayback, bool isDelete)
    : m_cout(stdout, QIODevice::WriteOnly)
{
    m_isPlayback = isPlayback;
    m_isDelete = isDelete;

    // Make sure the data we receive is in correct PCM format.
    // Our wav file writer only supports SignedInt sample type.
    QAudioFormat format;
    format.setChannelCount(2);
    format.setSampleSize(16);
    format.setSampleRate(48000);
    format.setCodec("audio/pcm");
    format.setSampleType(QAudioFormat::SignedInt);
    m_decoder.setAudioFormat(format);

    connect(&m_decoder, SIGNAL(bufferReady()), this, SLOT(bufferReady()));
    connect(&m_decoder, SIGNAL(error(QAudioDecoder::Error)), this, SLOT(error(QAudioDecoder::Error)));
    connect(&m_decoder, SIGNAL(stateChanged(QAudioDecoder::State)), this, SLOT(stateChanged(QAudioDecoder::State)));
    connect(&m_decoder, SIGNAL(finished()), this, SLOT(finished()));
    connect(&m_decoder, SIGNAL(positionChanged(qint64)), this, SLOT(updateProgress()));
    connect(&m_decoder, SIGNAL(durationChanged(qint64)), this, SLOT(updateProgress()));

    connect(&m_soundEffect, SIGNAL(statusChanged()), this, SLOT(playbackStatusChanged()));
    connect(&m_soundEffect, SIGNAL(playingChanged()), this, SLOT(playingChanged()));

    m_progress = -1.0;
}
コード例 #11
0
ファイル: audiocore.cpp プロジェクト: arinik2/sunstar-mobile
void AudioCore::recordAudioSample(int t = 500, bool writeToFile = false)
{
    latestSampleDuration = t;
    writeSampleToFile    = writeToFile;

    sampleAudioBuffer.open(QBuffer::ReadWrite);
    QAudioFormat format;

    // Настраиваем желаемый формат, например:
    format.setSampleRate(AudioCore::SampleRate);
    format.setSampleSize(8 * AudioCore::SampleSize);
    format.setChannelCount(1);
    format.setCodec("audio/pcm");
    format.setByteOrder(QAudioFormat::LittleEndian);
    format.setSampleType(QAudioFormat::UnSignedInt);

    // ВЫбрать устройство ввода 0:
    QAudioDeviceInfo info(QAudioDeviceInfo::availableDevices(QAudio::AudioInput).at(0));
    qDebug() << "Selected input device =" << info.deviceName();

    if (!info.isFormatSupported(format)) {
       qWarning() << "Default format not supported, trying to use the nearest.";
       format = info.nearestFormat(format);
    }

    audio = new QAudioInput(format);

    // Очень важно, иначе будут шумы и все картинки ужасно некрасивые.
    audio->setVolume(AudioCore::AudioLevel);
    connect(audio, SIGNAL(stateChanged(QAudio::State)), this, SLOT(handleStateChanged(QAudio::State)));

    QTimer::singleShot(t, this, SLOT(stopRecording()));
    audio->start(&sampleAudioBuffer);
}
コード例 #12
0
void xmppClient::slotAudioModeChanged(QIODevice::OpenMode mode)
{
    QXmppCall *call = qobject_cast<QXmppCall*>(sender());
    Q_ASSERT(call);
    QXmppRtpAudioChannel *channel = call->audioChannel();

    // prepare audio format
    QAudioFormat format;
    format.setSampleRate(channel->payloadType().clockrate());
    format.setChannelCount(channel->payloadType().channels());
    format.setSampleSize(16);
    format.setCodec("audio/pcm");
    format.setByteOrder(QAudioFormat::LittleEndian);
    format.setSampleType(QAudioFormat::SignedInt);

    // the size in bytes of the audio buffers to/from sound devices
    // 160 ms seems to be the minimum to work consistently on Linux/Mac/Windows
    const int bufferSize = (format.sampleRate() * format.channelCount() * (format.sampleSize() / 8) * 160) / 1000;

    if (mode & QIODevice::ReadOnly) {
        // initialise audio output
        QAudioOutput *audioOutput = new QAudioOutput(format, this);
        audioOutput->setBufferSize(bufferSize);
        audioOutput->start(channel);
    }

    if (mode & QIODevice::WriteOnly) {
        // initialise audio input
        QAudioInput *audioInput = new QAudioInput(format, this);
        audioInput->setBufferSize(bufferSize);
        audioInput->start(channel);
    }
}
コード例 #13
0
ファイル: main.cpp プロジェクト: narnru/project-tuner
void InitializeAudio()
{
    m_format.setSampleRate(SampleRate); //set frequency to 44100
    m_format.setChannelCount(1); //set channels to mono
    m_format.setSampleSize(16); //set sample sze to 16 bit
    m_format.setSampleType(QAudioFormat::SignedInt ); //Sample type as usigned integer sample UnSignedInt
    m_format.setByteOrder(QAudioFormat::LittleEndian); //Byte order
    m_format.setCodec("audio/pcm"); //set codec as simple audio/pcm

    QAudioDeviceInfo infoIn(QAudioDeviceInfo::defaultInputDevice());
    if (!infoIn.isFormatSupported(m_format))
    {
        //Default format not supported - trying to use nearest
        m_format = infoIn.nearestFormat(m_format);
    }

    QAudioDeviceInfo infoOut(QAudioDeviceInfo::defaultOutputDevice());

    if (!infoOut.isFormatSupported(m_format))
    {
       //Default format not supported - trying to use nearest
        m_format = infoOut.nearestFormat(m_format);
    }

    m_audioInput = new QAudioInput(m_Inputdevice, m_format);
    m_audioOutput = new QAudioOutput(m_Outputdevice, m_format);
}
コード例 #14
0
ファイル: CRecordData.cpp プロジェクト: yanwucanyue/BrainUp
int CRecordData::StartRecord(bool bIsSection)
{
    if(true == bIsSection)
    {

    }
    else
    {
        SetNumofRecDatSec(0);

        // 初始化一个buffer储存raw数据
        QBuffer* bufRecord = new QBuffer();
        bufRecord->open( QIODevice::WriteOnly | QIODevice::Truncate );

        SetRecDatSec(m_iNumOfRecDatSec, bufRecord);
        SetNumofRecDatSec(m_iNumOfRecDatSec+1);

        // 设置录音格式
        QAudioFormat format;
        format.setSampleRate(8000);
        format.setChannelCount(1);
        format.setSampleSize(8);
        format.setCodec("audio/pcm");
        format.setByteOrder(QAudioFormat::LittleEndian);
        format.setSampleType(QAudioFormat::UnSignedInt);

        // 设置录音设备
        audioInput = new QAudioInput(format, this);
        audioInput->start(bufRecord);
    }

}
コード例 #15
0
void QSpotifyAudioThreadWorker::startStreaming(int channels, int sampleRate)
{
    qDebug() << "QSpotifyAudioThreadWorker::startStreaming";
    if (!m_audioOutput) {
        QAudioFormat af;
        af.setChannelCount(channels);
        af.setCodec("audio/pcm");
        af.setSampleRate(sampleRate);
        af.setSampleSize(16);
        af.setSampleType(QAudioFormat::SignedInt);

        QAudioDeviceInfo info(QAudioDeviceInfo::defaultOutputDevice());
        if (!info.isFormatSupported(af)) {
            QList<QAudioDeviceInfo> devices = QAudioDeviceInfo::availableDevices(QAudio::AudioOutput);
            for (int i = 0; i < devices.size(); i++) {
                QAudioDeviceInfo dev = devices[i];
                qWarning() << dev.deviceName();
            }
            QCoreApplication::postEvent(QSpotifySession::instance(), new QEvent(QEvent::Type(StopEventType)));
            return;
        }

        m_audioOutput = new QAudioOutput(af);
        connect(m_audioOutput, SIGNAL(stateChanged(QAudio::State)), QSpotifySession::instance(), SLOT(audioStateChange(QAudio::State)));
        m_audioOutput->setBufferSize(BUF_SIZE);

        startAudioOutput();
    }
}
コード例 #16
0
ファイル: mainwindow.cpp プロジェクト: SpenserL/WirelessAudio
void MainWindow::on_pushButton_clicked()
{
      QIODevice *QID;
      //QID->open( QIODevice::WriteOnly);
      QBuffer myQB;

     //QID(myQB);
    //cb(128000,64000);
     //dFile.setFileName("../RecordTest.raw");
     microphoneBuffer->open( QIODevice::ReadWrite);
     QAudioFormat format;
     // Set up the desired format, for example:
     format.setSampleRate(16000);
     format.setChannelCount(1);
     format.setSampleSize(16);
     format.setCodec("audio/pcm");
     format.setByteOrder(QAudioFormat::LittleEndian);
     format.setSampleType(QAudioFormat::UnSignedInt);

     QAudioDeviceInfo info = QAudioDeviceInfo::defaultInputDevice();
     if (!info.isFormatSupported(format))
     {
         qWarning() << "Default format not supported, trying to use the nearest.";
         format = info.nearestFormat(format);
     }

     audio = new QAudioInput(format, this);
     connect(audio, SIGNAL(stateChanged(QAudio::State)), this, SLOT(handleStateChanged(QAudio::State)));

     //QTimer::singleShot(5000, this, SLOT(on_pushButton_2_clicked()));
     isRecording = true;
     audio->start(microphoneBuffer);
}
コード例 #17
0
ファイル: engine.cpp プロジェクト: sssunsha/music
bool Engine::selectFormat()
{
    bool foundSupportedFormat = false;

    if (m_file || QAudioFormat() != m_format) {
        QAudioFormat format = m_format;
        if (m_file)
            // Header is read from the WAV file; just need to check whether
            // it is supported by the audio output device
            format = m_file->fileFormat();
        if (m_audioOutputDevice.isFormatSupported(format)) {
            setFormat(format);
            foundSupportedFormat = true;
        }
    } else {

        QList<int> sampleRatesList;

        if (!m_generateTone)

            sampleRatesList += m_audioOutputDevice.supportedSampleRates();
        sampleRatesList = sampleRatesList.toSet().toList(); // remove duplicates
        qSort(sampleRatesList);
        ENGINE_DEBUG << "Engine::initialize frequenciesList" << sampleRatesList;

        QList<int> channelsList;
        channelsList += m_audioOutputDevice.supportedChannelCounts();
        channelsList = channelsList.toSet().toList();
        qSort(channelsList);
        ENGINE_DEBUG << "Engine::initialize channelsList" << channelsList;

        QAudioFormat format;
        format.setByteOrder(QAudioFormat::LittleEndian);
        format.setCodec("audio/pcm");
        format.setSampleSize(16);
        format.setSampleType(QAudioFormat::SignedInt);
        int sampleRate, channels;
        foreach (sampleRate, sampleRatesList) {
            if (foundSupportedFormat)
                break;
            format.setSampleRate(sampleRate);
            foreach (channels, channelsList) {
                format.setChannelCount(channels);
                const bool outputSupport = m_audioOutputDevice.isFormatSupported(format);
                ENGINE_DEBUG << "Engine::initialize checking " << format
                             << "output" << outputSupport;
                if (outputSupport)
                {
                    foundSupportedFormat = true;
                    break;
                }
            }
        }

        if (!foundSupportedFormat)
            format = QAudioFormat();

        setFormat(format);
    }
コード例 #18
0
QAudioFormat QAudioDeviceInfoInternal::preferredFormat() const
{
    QAudioFormat format;
    switch (m_mode) {
    case QAudio::AudioOutput:
        format.setFrequency(44100);
        format.setChannels(2);
        format.setSampleSize(16);
        format.setByteOrder(QAudioFormat::LittleEndian);
        format.setSampleType(QAudioFormat::SignedInt);
        format.setCodec(QLatin1String("audio/pcm"));
        break;

    case QAudio::AudioInput:
        format.setFrequency(8000);
        format.setChannels(1);
        format.setSampleSize(16);
        format.setByteOrder(QAudioFormat::LittleEndian);
        format.setSampleType(QAudioFormat::SignedInt);
        format.setCodec(QLatin1String("audio/pcm"));
        break;

    default:
        Q_ASSERT_X(false, Q_FUNC_INFO, "Invalid mode");
    }

    if (!isFormatSupported(format)) {
        format = QAudioFormat();
        format.setCodec(QLatin1String("audio/pcm"));
        if (m_capabilities.contains(format.codec())) {
            const Capabilities &codecCaps = m_capabilities[format.codec()];
            if (codecCaps.m_frequencies.size())
                format.setFrequency(codecCaps.m_frequencies[0]);
            if (codecCaps.m_channels.size())
                format.setChannels(codecCaps.m_channels[0]);
            if (codecCaps.m_sampleSizes.size())
                format.setSampleSize(codecCaps.m_sampleSizes[0]);
            if (codecCaps.m_byteOrders.size())
                format.setByteOrder(codecCaps.m_byteOrders[0]);
            if (codecCaps.m_sampleTypes.size())
                format.setSampleType(codecCaps.m_sampleTypes[0]);
        }
    }

    return format;
}
コード例 #19
0
ファイル: buffer.cpp プロジェクト: Pfeil/CAN2
QAudioFormat audioFormat( const int channels, const int sampleRate, AVSampleFormat sampleFormat )
{
    QAudioFormat format;
    format.setChannelCount( channels );
    format.setCodec( "audio/pcm" );
    switch (sampleFormat)
    {
    case AV_SAMPLE_FMT_U8:          ///< unsigned 8 bits
        format.setSampleSize(8);
        format.setSampleType( QAudioFormat::UnSignedInt  );
        break;
    case AV_SAMPLE_FMT_S16:         ///< signed 16 bits
        format.setSampleSize(16);
        format.setSampleType( QAudioFormat::SignedInt  );
        break;

    case AV_SAMPLE_FMT_S32:         ///< signed 32 bits
        format.setSampleSize(32);
        format.setSampleType( QAudioFormat::SignedInt  );
        break;
    case AV_SAMPLE_FMT_FLT:         ///< float
        format.setSampleSize(16);
        format.setSampleType( QAudioFormat::Float  );
        break;
    case AV_SAMPLE_FMT_DBL:         ///< double
        format.setSampleSize(32);
        format.setSampleType( QAudioFormat::Float  );
        break;

    case AV_SAMPLE_FMT_U8P:         ///< unsigned 8 bits: planar
        format.setSampleSize(8);
        format.setSampleType( QAudioFormat::UnSignedInt  );
        break;
    case AV_SAMPLE_FMT_S16P:        ///< signed 16 bits: planar
        format.setSampleSize(16);
        format.setSampleType( QAudioFormat::SignedInt  );
        break;
    case AV_SAMPLE_FMT_S32P:        ///< signed 32 bits: planar
        format.setSampleSize(32);
        format.setSampleType( QAudioFormat::SignedInt  );
        break;
    case AV_SAMPLE_FMT_FLTP:        ///< float: planar
        format.setSampleSize(16);
        format.setSampleType( QAudioFormat::SignedInt  );
        break;
    case AV_SAMPLE_FMT_DBLP:        ///< double, planar
        format.setSampleSize(32);
        format.setSampleType( QAudioFormat::SignedInt  );
        break;
    default:
        qWarning() << "codec format: " << sampleFormat << AV_SAMPLE_FMT_NONE;
        return QAudioFormat();
    }

    format.setSampleRate( sampleRate );
    return format;
}
コード例 #20
0
QAudioFormat QAudioDeviceInfoInternal::preferredFormat() const
{
    QAudioFormat nearest;
    if(mode == QAudio::AudioOutput) {
        nearest.setFrequency(44100);
        nearest.setChannels(2);
        nearest.setByteOrder(QAudioFormat::LittleEndian);
        nearest.setSampleType(QAudioFormat::SignedInt);
        nearest.setSampleSize(16);
        nearest.setCodec(QLatin1String("audio/pcm"));
    } else {
        nearest.setFrequency(11025);
        nearest.setChannels(1);
        nearest.setSampleType(QAudioFormat::SignedInt);
        nearest.setSampleSize(8);
        nearest.setCodec(QLatin1String("audio/pcm"));
    }
    return nearest;
}
コード例 #21
0
QAudioFormat format() {
    QAudioFormat format;
    format.setSampleRate(8000);
    format.setChannelCount(1);
    format.setSampleSize(8);
    format.setCodec("audio/pcm");
    format.setByteOrder(QAudioFormat::LittleEndian);
    format.setSampleType(QAudioFormat::UnSignedInt);
    return format;
}
コード例 #22
0
void TSoundOutputDeviceImp::play(const TSoundTrackP &st, TINT32 s0, TINT32 s1,
                                 bool loop, bool scrubbing) {
  if (!doSetStreamFormat(st->getFormat())) return;

  MyData *myData = new MyData();

  myData->imp              = shared_from_this();
  myData->totalPacketCount = s1 - s0;
  myData->fileByteCount    = (s1 - s0) * st->getSampleSize();
  myData->entireFileBuffer = new char[myData->fileByteCount];

  memcpy(myData->entireFileBuffer, st->getRawData() + s0 * st->getSampleSize(),
         myData->fileByteCount);

  m_isPlaying       = true;
  myData->isLooping = loop;

  QAudioFormat format;
  QAudioDeviceInfo info(QAudioDeviceInfo::defaultOutputDevice());

  format.setSampleSize(st->getBitPerSample());
  format.setCodec("audio/pcm");
  format.setChannelCount(st->getChannelCount());
  format.setByteOrder(QAudioFormat::LittleEndian);
  format.setSampleType(st->getFormat().m_signedSample
                           ? QAudioFormat::SignedInt
                           : QAudioFormat::UnSignedInt);
  format.setSampleRate(st->getSampleRate());
  QList<QAudioFormat::Endian> sbos        = info.supportedByteOrders();
  QList<int> sccs                         = info.supportedChannelCounts();
  QList<int> ssrs                         = info.supportedSampleRates();
  QList<QAudioFormat::SampleType> sstypes = info.supportedSampleTypes();
  QList<int> ssss                         = info.supportedSampleSizes();
  QStringList supCodes                    = info.supportedCodecs();
  if (!info.isFormatSupported((format))) {
    format                                 = info.nearestFormat(format);
    int newChannels                        = format.channelCount();
    int newBitsPerSample                   = format.sampleSize();
    int newSampleRate                      = format.sampleRate();
    QAudioFormat::SampleType newSampleType = format.sampleType();
    QAudioFormat::Endian newBo             = format.byteOrder();
  }
  int test = st->getSampleCount() / st->getSampleRate();
  QByteArray *data =
      new QByteArray(myData->entireFileBuffer, myData->fileByteCount);
  QBuffer *newBuffer = new QBuffer;
  newBuffer->setBuffer(data);
  newBuffer->open(QIODevice::ReadOnly);
  newBuffer->seek(0);
  if (m_audioOutput == NULL) {
    m_audioOutput = new QAudioOutput(format, NULL);
  }
  m_audioOutput->start(newBuffer);
  m_audioOutput->setVolume(m_volume);
}
コード例 #23
0
ファイル: MainWindow.cpp プロジェクト: hardaker/Agenda
MainWindow::MainWindow(QWidget *parent) :
    QMainWindow(parent),
    ui(new Ui::MainWindow), m_timer(), m_totalNeededTime(0,0), m_spentTime(0,0), m_belowAlarmTime(false), m_belowEndTime(false),
    m_dbusInterface(0), m_alarmTime(60), m_useLED(true), m_useSounds(true)
{
    ui->setupUi(this);

    m_topics.push_back(new AgendaTopic("topic #1", QTime(0,5)));
    m_topics.push_back(new AgendaTopic("topic #2", QTime(0,15)));

    calculateTotalTimes();

    m_currentTopic = 1;

    mainWindowSetup();
    setupMenus();

    connect(ui->next, SIGNAL(clicked()), this, SLOT(switchToNextTopic()));
    connect(ui->previous, SIGNAL(clicked()), this, SLOT(switchToPreviousTopic()));
    connect(ui->start, SIGNAL(clicked()), this, SLOT(startOrStop()));

    connect(ui->plus15, SIGNAL(clicked()), this, SLOT(add15m()));
    connect(ui->plus5, SIGNAL(clicked()), this, SLOT(add5m()));
    connect(ui->plus1, SIGNAL(clicked()), this, SLOT(add1m()));

    connect(ui->minus15, SIGNAL(clicked()), this, SLOT(minus15m()));
    connect(ui->minus5, SIGNAL(clicked()), this, SLOT(minus5m()));
    connect(ui->minus1, SIGNAL(clicked()), this, SLOT(minus1m()));

    connect(&m_timer, SIGNAL(timeout()), this, SLOT(timeElapsed()));

#ifdef IS_MAEMO
    m_dbusInterface = new QDBusInterface(MCE_SERVICE, MCE_REQUEST_PATH, MCE_REQUEST_IF, QDBusConnection::systemBus(), this);
    QDBusMessage reply = m_dbusInterface->call(MCE_ENABLE_LED);
    if (reply.type() == QDBusMessage::ErrorMessage)
        qDebug() << reply.errorMessage();
#endif

    // set up the output audio

    QAudioFormat format;
    // Set up the format, eg.
    format.setFrequency(44100);
    format.setChannels(1);
    format.setSampleSize(16);
    format.setCodec("audio/pcm");
    format.setByteOrder(QAudioFormat::LittleEndian);
    format.setSampleType(QAudioFormat::SignedInt);

    QAudioDeviceInfo info(QAudioDeviceInfo::defaultOutputDevice());

    m_audioOut = new QAudioOutput(format);
    // connect(m_audioOut,SIGNAL(stateChanged(QAudio::State)),SLOT(finishedPlaying(QAudio::State)));
}
コード例 #24
0
 explicit DeviceAudioOutput(int sampleRate) :
     AudioOutput(sampleRate) {
     format.setChannels(2);
     format.setFrequency(sampleRate);
     format.setSampleSize(16);
     format.setCodec("audio/pcm");
     format.setSampleType(QAudioFormat::SignedInt);
     out = new QAudioOutput(format);
     device = 0;
     memset(buffer, 0, sizeof(char) * kUnitBufferLength);
 }
コード例 #25
0
ファイル: mediacall.cpp プロジェクト: devel29a/leechcraft
	QAudioFormat MediaCall::GetAudioReadFormat () const
	{
		const auto& payload = Call_->audioChannel ()->payloadType ();
		QAudioFormat result;
		result.setSampleRate (payload.clockrate ());
		result.setChannelCount (payload.channels ());
		result.setSampleSize (16);
		result.setCodec ("audio/pcm");
		result.setByteOrder (QAudioFormat::LittleEndian);
		result.setSampleType (QAudioFormat::SignedInt);
		return result;
	}
コード例 #26
0
void MainWindow::PlaySound() {


    //QSound *sound = new QSound("/home/mike/TediumRemedy/sample.wav", this);
    //sound->play();
    //return;

    sourceFile.setFileName("/home/mike/TediumRemedy/sample.wav");
    sourceFile.open(QIODevice::ReadOnly);

    QAudioFormat format;
    // Set up the format, eg.
    format.setSampleRate(44100);
    format.setChannelCount(2);
    format.setSampleSize(16);
    format.setCodec("audio/pcm");
    format.setByteOrder(QAudioFormat::LittleEndian);
    format.setSampleType(QAudioFormat::SignedInt);

    QAudioDeviceInfo info(QAudioDeviceInfo::defaultOutputDevice());
    if (!info.isFormatSupported(format)) {
        qWarning() << "Raw audio format not supported by backend, cannot play audio.";
        return;
    }



    return;


    /*QSound::play(":resources/connected.wav");
    return;
*/
    QList<QAudioDeviceInfo> l = QAudioDeviceInfo::availableDevices(QAudio::AudioOutput);
    foreach(QAudioDeviceInfo i, l) {
        qDebug() << i.supportedCodecs();
    }



    QTextStream out(stdout);
    out << "START-OUTPUT" << endl;
    QList<QAudioDeviceInfo> outputList = QAudioDeviceInfo::availableDevices(QAudio::AudioOutput);
    foreach(QAudioDeviceInfo outputInfo, outputList) {
       out << outputInfo.deviceName() << endl;
    }
    out << "END-OUTPUT" << endl;
    return;

    /*QMediaPlayer *p  = new QMediaPlayer(0);
    p->setMedia(QMediaContent(QUrl::fromLocalFile(":/resources/connected.wav")));
    p->play();*/
}
コード例 #27
0
QAudioFormat MultimediaWidget::getAudioFormat( AVInfo const & aAvInfo ) const
{
    QAudioFormat audioFormat;
    audioFormat.setSampleRate( aAvInfo.getAudioSampleRate() );
    audioFormat.setChannelCount( aAvInfo.getAudioChannel() );
    audioFormat.setSampleSize( aAvInfo.getAudioBitsPerSample() );
    audioFormat.setCodec( "audio/pcm" );
    audioFormat.setByteOrder(QAudioFormat::LittleEndian);
    audioFormat.setSampleType(QAudioFormat::UnSignedInt);

    return audioFormat;
}
コード例 #28
0
QAudioFormat Settings::audioFormat() const
{
    QAudioFormat format;
    format.setByteOrder(QAudioFormat::LittleEndian);
    format.setChannelCount(1);
    format.setCodec("audio/pcm");
    format.setSampleRate(d->sampleRate);
    format.setSampleSize(d->sampleSize);
    format.setSampleType(QAudioFormat::SignedInt);

    return d->inputDevice.nearestFormat(format);
}
コード例 #29
0
ファイル: AudioHandler.cpp プロジェクト: dezgeg/yagb
QAudioFormat AudioHandler::createFormat() {
    QAudioFormat f;

    f.setCodec("audio/pcm");
    f.setChannelCount(2);
    f.setSampleRate(48000);
    f.setSampleSize(16);
    f.setSampleType(QAudioFormat::UnSignedInt);
    f.setByteOrder(QAudioFormat::LittleEndian);

    return f;
}
コード例 #30
0
ファイル: videoitem.cpp プロジェクト: Gu1/Phoenix
void VideoItem::updateAudioFormat()
{
    QAudioFormat format;
    format.setSampleSize(16);
    format.setSampleRate(core->getSampleRate());
    format.setChannelCount(2);
    format.setSampleType(QAudioFormat::SignedInt);
    format.setByteOrder(QAudioFormat::LittleEndian);
    format.setCodec("audio/pcm");
    // TODO test format
    audio->setFormat(format);
}