コード例 #1
0
void RemoteSelector::serviceDiscovered(const QBluetoothServiceInfo &serviceInfo)
{
#if 0
    qDebug() << "Discovered service on"
             << serviceInfo.device().name() << serviceInfo.device().address().toString();
    qDebug() << "\tService name:" << serviceInfo.serviceName();
    qDebug() << "\tDescription:"
             << serviceInfo.attribute(QBluetoothServiceInfo::ServiceDescription).toString();
    qDebug() << "\tProvider:"
             << serviceInfo.attribute(QBluetoothServiceInfo::ServiceProvider).toString();
    qDebug() << "\tL2CAP protocol service multiplexer:"
             << serviceInfo.protocolServiceMultiplexer();
    qDebug() << "\tRFCOMM server channel:" << serviceInfo.serverChannel();
#endif
    QMapIterator<QListWidgetItem *, QBluetoothServiceInfo> i(m_discoveredServices);
    while (i.hasNext()){
        i.next();
        if (serviceInfo.device().address() == i.value().device().address()){
            return;
        }
    }

    QString remoteName;
    if (serviceInfo.device().name().isEmpty())
        remoteName = serviceInfo.device().address().toString();
    else
        remoteName = serviceInfo.device().name();

    QListWidgetItem *item =
        new QListWidgetItem(QString::fromLatin1("%1 %2").arg(remoteName,
                                                             serviceInfo.serviceName()));

    m_discoveredServices.insert(item, serviceInfo);
    ui->remoteDevices->addItem(item);
}
コード例 #2
0
/*!
    Attempts to connect to the service described by \a service.

    The socket is opened in the given \a openMode. The \l socketType() may change
    depending on the protocol required by \a service.

    The socket first enters ConnectingState and attempts to connect to the device providing
    \a service. If a connection is established, QBluetoothSocket enters ConnectedState and
    emits connected().

    At any point, the socket can emit error() to signal that an error occurred.

    Note that most platforms require a pairing prior to connecting to the remote device. Otherwise
    the connection process may fail.

    \sa state(), disconnectFromService()
*/
void QBluetoothSocket::connectToService(const QBluetoothServiceInfo &service, OpenMode openMode)
{
    Q_D(QBluetoothSocket);

    if (state() != QBluetoothSocket::UnconnectedState && state() != QBluetoothSocket::ServiceLookupState) {
        qCWarning(QT_BT)  << "QBluetoothSocket::connectToService called on busy socket";
        d->errorString = QBluetoothSocket::tr("Trying to connect while connection is in progress");
        setSocketError(QBluetoothSocket::OperationError);
        return;
    }
#if defined(QT_QNX_BLUETOOTH) || defined(QT_ANDROID_BLUETOOTH)
    if (!d->ensureNativeSocket(service.socketProtocol())) {
        d->errorString = tr("Socket type not supported");
        setSocketError(QBluetoothSocket::UnsupportedProtocolError);
        return;
    }
    d->connectToService(service.device().address(), service.serviceUuid(), openMode);
#else
    if (service.protocolServiceMultiplexer() > 0) {
        if (!d->ensureNativeSocket(QBluetoothServiceInfo::L2capProtocol)) {
            d->errorString = tr("Unknown socket error");
            setSocketError(UnknownSocketError);
            return;
        }
        d->connectToService(service.device().address(), service.protocolServiceMultiplexer(), openMode);
    } else if (service.serverChannel() > 0) {
        if (!d->ensureNativeSocket(QBluetoothServiceInfo::RfcommProtocol)) {
            d->errorString = tr("Unknown socket error");
            setSocketError(UnknownSocketError);
            return;
        }
        d->connectToService(service.device().address(), service.serverChannel(), openMode);
    } else {
        // try doing service discovery to see if we can find the socket
        if(service.serviceUuid().isNull()){
            qCWarning(QT_BT) << "No port, no PSM, and no UUID provided, unable to connect";
            return;
        }
        qCDebug(QT_BT) << "Need a port/psm, doing discovery";
        doDeviceDiscovery(service, openMode);
    }
#endif
}
コード例 #3
0
void QBluetoothSocket::serviceDiscovered(const QBluetoothServiceInfo &service)
{
    Q_D(QBluetoothSocket);
    qCDebug(QT_BT) << "FOUND SERVICE!" << service;
    if (service.protocolServiceMultiplexer() > 0 || service.serverChannel() > 0) {
        connectToService(service, d->openMode);
        d->discoveryAgent->deleteLater();
        d->discoveryAgent = 0;
    } else {
        qCDebug(QT_BT) << "Could not find port/psm for potential remote service";
    }
}
コード例 #4
0
ファイル: icontrolpadclient.cpp プロジェクト: Summeli/iCP4Qt
void iControlPadClient::serviceDiscovered(const QBluetoothServiceInfo &serviceInfo)
{
    qDebug() << "Discovered service on"
             << serviceInfo.device().name() << serviceInfo.device().address().toString();
    qDebug() << "\tService name:" << serviceInfo.serviceName();
    qDebug() << "\tDescription:"
             << serviceInfo.attribute(QBluetoothServiceInfo::ServiceDescription).toString();
    qDebug() << "\tProvider:"
             << serviceInfo.attribute(QBluetoothServiceInfo::ServiceProvider).toString();
    qDebug() << "\tL2CAP protocol service multiplexer:"
             << serviceInfo.protocolServiceMultiplexer();
    qDebug() << "\tRFCOMM server channel:" << serviceInfo.serverChannel();

    if(  QString::compare ( serviceInfo.serviceName(), KiCPServiceName, Qt::CaseInsensitive ) == 0 )
        connectToService( serviceInfo );
}
コード例 #5
0
void tst_QBluetoothServiceInfo::tst_assignment()
{
    QFETCH(QUuid, uuid);
    QFETCH(QBluetoothUuid::ProtocolUuid, protocolUuid);
    QFETCH(QBluetoothServiceInfo::Protocol, serviceInfoProtocol);

    const QString serviceName("My Service");
    const QBluetoothDeviceInfo deviceInfo(QBluetoothAddress("001122334455"), "Test Device", 0);

    QBluetoothServiceInfo serviceInfo;
    serviceInfo.setServiceName(serviceName);
    serviceInfo.setDevice(deviceInfo);

    QVERIFY(serviceInfo.isValid());

    {
        QBluetoothServiceInfo copyInfo = serviceInfo;

        QVERIFY(copyInfo.isValid());

        QCOMPARE(copyInfo.serviceName(), serviceName);
        QCOMPARE(copyInfo.device().address(), deviceInfo.address());
    }

    {
        QBluetoothServiceInfo copyInfo;

        QVERIFY(!copyInfo.isValid());

        copyInfo = serviceInfo;

        QVERIFY(copyInfo.isValid());

        QCOMPARE(copyInfo.serviceName(), serviceName);
        QCOMPARE(copyInfo.device().address(), deviceInfo.address());
    }

    {
        QBluetoothServiceInfo copyInfo1;
        QBluetoothServiceInfo copyInfo2;

        QVERIFY(!copyInfo1.isValid());
        QVERIFY(!copyInfo2.isValid());

        copyInfo1 = copyInfo2 = serviceInfo;

        QVERIFY(copyInfo1.isValid());
        QVERIFY(copyInfo2.isValid());

        QCOMPARE(copyInfo1.serviceName(), serviceName);
        QCOMPARE(copyInfo2.serviceName(), serviceName);
        QCOMPARE(copyInfo1.device().address(), deviceInfo.address());
        QCOMPARE(copyInfo2.device().address(), deviceInfo.address());
    }

    {
        QBluetoothServiceInfo copyInfo;
        QVERIFY(!copyInfo.isValid());
        copyInfo = serviceInfo;

        copyInfo.setAttribute(QBluetoothServiceInfo::ProtocolDescriptorList, uuid);
        QVERIFY(copyInfo.contains(QBluetoothServiceInfo::ProtocolDescriptorList));
        QVERIFY(copyInfo.isComplete());
        QVERIFY(copyInfo.attributes().count() > 0);

        copyInfo.removeAttribute(QBluetoothServiceInfo::ProtocolDescriptorList);
        QVERIFY(!copyInfo.contains(QBluetoothServiceInfo::ProtocolDescriptorList));
        QVERIFY(!copyInfo.isComplete());
    }

    {
        QBluetoothServiceInfo copyInfo;
        QVERIFY(!copyInfo.isValid());
        copyInfo = serviceInfo;

        QVERIFY(copyInfo.serverChannel() == -1);
        QVERIFY(copyInfo.protocolServiceMultiplexer() == -1);

        QBluetoothServiceInfo::Sequence protocolDescriptorList;
        QBluetoothServiceInfo::Sequence protocol;
        protocol << QVariant::fromValue(QBluetoothUuid(protocolUuid));
        protocolDescriptorList.append(QVariant::fromValue(protocol));
        protocol.clear();

        protocolDescriptorList.append(QVariant::fromValue(protocol));
        copyInfo.setAttribute(QBluetoothServiceInfo::ProtocolDescriptorList,
                                 protocolDescriptorList);
        QVERIFY(copyInfo.serverChannel() == -1);
        QVERIFY(copyInfo.protocolServiceMultiplexer() != -1);
        QVERIFY(copyInfo.socketProtocol() == serviceInfoProtocol);
    }

    {
        QBluetoothServiceInfo copyInfo;
        QVERIFY(!copyInfo.isValid());
        copyInfo = serviceInfo;
        QVERIFY(!copyInfo.isRegistered());

        QVERIFY(copyInfo.registerService());
        QVERIFY(copyInfo.isRegistered());

        QVERIFY(copyInfo.unregisterService());
        QVERIFY(!copyInfo.isRegistered());
    }
}
コード例 #6
0
ファイル: remoteselector.cpp プロジェクト: eugenelet/BlueMoon
void RemoteSelector::serviceDiscovered(const QBluetoothServiceInfo& serviceInfo) {
#if DEBUG_OUTPUT
    qDebug() << "Discovered service on"
             << serviceInfo.device().name() << serviceInfo.device().address().toString();
    qDebug() << "\tService name:" << serviceInfo.serviceName();
    qDebug() << "\tDescription:"
             << serviceInfo.attribute(QBluetoothServiceInfo::ServiceDescription).toString();
    qDebug() << "\tProvider:"
             << serviceInfo.attribute(QBluetoothServiceInfo::ServiceProvider).toString();
    qDebug() << "\tL2CAP protocol service multiplexer:"
             << serviceInfo.protocolServiceMultiplexer();
    qDebug() << "\tRFCOMM server channel:" << serviceInfo.serverChannel();
#endif

    QString remoteName;
    if (serviceInfo.device().name().isEmpty())
        remoteName = serviceInfo.device().address().toString();
    else
        remoteName = serviceInfo.device().name();

    QMutableMapIterator<int, QBluetoothServiceInfo> i(discoveredServices_);
    while (i.hasNext()){
        i.next();
        if (serviceInfo.device().address() == i.value().device().address()){
            i.setValue(serviceInfo);
            return;
        }
    }

    QString tooltip = QString("address: %1\nname: %2\nis trusted: %3\nis valid: %4\nservice: %5").arg(
                serviceInfo.device().address().toString(),
                serviceInfo.device().name(),
                trustedDevicelist.isTrusted(serviceInfo.device().address().toString()) ? "yes" : "no",
                serviceInfo.device().isValid() ? "yes" : "no",
                serviceInfo.serviceDescription());
    if (!trustedDevicelist.isTrusted(serviceInfo.device().address().toString()))
    {
        int row = ui->remoteDevices->rowCount();
        ui->remoteDevices->insertRow(row);
        QTableWidgetItem *item = new QTableWidgetItem(serviceInfo.device().address().toString());
        item->setToolTip(tooltip);
        ui->remoteDevices->setItem(row, 0, item);
        item = new QTableWidgetItem(serviceInfo.device().name());
        ui->remoteDevices->setItem(row, 1, item);
        item = new QTableWidgetItem(serviceInfo.serviceName());

        ui->remoteDevices->setItem(row, 2, item);

        QBluetoothLocalDevice::Pairing p;

        p = localDevice_->pairingStatus(serviceInfo.device().address());

        ui->remoteDevices->blockSignals(true);

        item = new QTableWidgetItem();
        if ((p&QBluetoothLocalDevice::Paired) || (p&QBluetoothLocalDevice::AuthorizedPaired))
            item->setCheckState(Qt::Checked);
        else
            item->setCheckState(Qt::Unchecked);
        ui->remoteDevices->setItem(row, 3, item);

        item = new QTableWidgetItem();
        if (p&QBluetoothLocalDevice::AuthorizedPaired)
            item->setCheckState(Qt::Checked);
        else
            item->setCheckState(Qt::Unchecked);
        ui->remoteDevices->setItem(row, 4, item);

        item = new QTableWidgetItem();
        if (trustedDevicelist.isTrusted(serviceInfo.device().address().toString()))
            item->setCheckState(Qt::Checked);
        else
            item->setCheckState(Qt::Unchecked);
        ui->remoteDevices->setItem(row, 5, item);

        ui->remoteDevices->blockSignals(false);


        discoveredServices_.insert(row, serviceInfo);
    }
}
コード例 #7
0
void tst_QBluetoothServiceInfo::tst_construction()
{
    const QString serviceName("My Service");
    const QString alternateServiceName("Another ServiceName");
    const QBluetoothDeviceInfo deviceInfo(QBluetoothAddress("001122334455"), "Test Device", 0);
    const QBluetoothDeviceInfo alternatedeviceInfo(QBluetoothAddress("554433221100"), "Test Device2", 0);

    QList<QBluetoothUuid::ProtocolUuid> protUuids;
    //list taken from qbluetoothuuid.h
    protUuids << QBluetoothUuid::Sdp;
    protUuids << QBluetoothUuid::Udp;
    protUuids << QBluetoothUuid::Rfcomm;
    protUuids << QBluetoothUuid::Tcp;
    protUuids << QBluetoothUuid::TcsBin;
    protUuids << QBluetoothUuid::TcsAt;
    protUuids << QBluetoothUuid::Att;
    protUuids << QBluetoothUuid::Obex;
    protUuids << QBluetoothUuid::Ip;
    protUuids << QBluetoothUuid::Ftp;
    protUuids << QBluetoothUuid::Http;
    protUuids << QBluetoothUuid::Wsp;
    protUuids << QBluetoothUuid::Bnep;
    protUuids << QBluetoothUuid::Upnp;
    protUuids << QBluetoothUuid::Hidp;
    protUuids << QBluetoothUuid::HardcopyControlChannel;
    protUuids << QBluetoothUuid::HardcopyDataChannel;
    protUuids << QBluetoothUuid::HardcopyNotification;
    protUuids << QBluetoothUuid::Avctp;
    protUuids << QBluetoothUuid::Avdtp;
    protUuids << QBluetoothUuid::Cmtp;
    protUuids << QBluetoothUuid::UdiCPlain;
    protUuids << QBluetoothUuid::McapControlChannel;
    protUuids << QBluetoothUuid::McapDataChannel;
    protUuids << QBluetoothUuid::L2cap;

    {
        QBluetoothServiceInfo serviceInfo;

        QVERIFY(!serviceInfo.isValid());
        QVERIFY(!serviceInfo.isComplete());
        QVERIFY(!serviceInfo.isRegistered());
        QCOMPARE(serviceInfo.serviceName(), QString());
        QCOMPARE(serviceInfo.serviceDescription(), QString());
        QCOMPARE(serviceInfo.serviceProvider(), QString());
        QCOMPARE(serviceInfo.serviceUuid(), QBluetoothUuid());
        QCOMPARE(serviceInfo.serviceClassUuids().count(), 0);
        QCOMPARE(serviceInfo.attributes().count(), 0);
        QCOMPARE(serviceInfo.serverChannel(), -1);
        QCOMPARE(serviceInfo.protocolServiceMultiplexer(), -1);

        foreach (QBluetoothUuid::ProtocolUuid u, protUuids)
            QCOMPARE(serviceInfo.protocolDescriptor(u).count(), 0);
    }

    {
        QBluetoothServiceInfo serviceInfo;
        serviceInfo.setServiceName(serviceName);
        serviceInfo.setDevice(deviceInfo);

        QVERIFY(serviceInfo.isValid());
        QVERIFY(!serviceInfo.isComplete());
        QVERIFY(!serviceInfo.isRegistered());

        QCOMPARE(serviceInfo.serviceName(), serviceName);
        QCOMPARE(serviceInfo.device().address(), deviceInfo.address());

        QBluetoothServiceInfo copyInfo(serviceInfo);

        QVERIFY(copyInfo.isValid());
        QVERIFY(!copyInfo.isComplete());
        QVERIFY(!copyInfo.isRegistered());

        QCOMPARE(copyInfo.serviceName(), serviceName);
        QCOMPARE(copyInfo.device().address(), deviceInfo.address());


        copyInfo.setAttribute(QBluetoothServiceInfo::ServiceName, alternateServiceName);
        copyInfo.setDevice(alternatedeviceInfo);
        QCOMPARE(copyInfo.serviceName(), alternateServiceName);
        QCOMPARE(copyInfo.attribute(QBluetoothServiceInfo::ServiceName).toString(), alternateServiceName);
        QCOMPARE(serviceInfo.serviceName(), alternateServiceName);
        QCOMPARE(copyInfo.device().address(), alternatedeviceInfo.address());
        QCOMPARE(serviceInfo.device().address(), alternatedeviceInfo.address());

        foreach (QBluetoothUuid::ProtocolUuid u, protUuids)
            QCOMPARE(serviceInfo.protocolDescriptor(u).count(), 0);
        foreach (QBluetoothUuid::ProtocolUuid u, protUuids)
            QCOMPARE(copyInfo.protocolDescriptor(u).count(), 0);
    }
}
コード例 #8
0
void tst_QBluetoothServiceInfo::tst_assignment()
{
    QFETCH(QUuid, uuid);
    QFETCH(QBluetoothUuid::ProtocolUuid, protocolUuid);
    QFETCH(QBluetoothServiceInfo::Protocol, serviceInfoProtocol);
    QFETCH(bool, protocolSupported);

    const QString serviceName("My Service");
    const QBluetoothDeviceInfo deviceInfo(QBluetoothAddress("001122334455"), "Test Device", 0);

    QBluetoothServiceInfo serviceInfo;
    serviceInfo.setServiceName(serviceName);
    serviceInfo.setDevice(deviceInfo);

    QVERIFY(serviceInfo.isValid());
    QVERIFY(!serviceInfo.isRegistered());
    QVERIFY(!serviceInfo.isComplete());

    {
        QBluetoothServiceInfo copyInfo = serviceInfo;

        QVERIFY(copyInfo.isValid());
        QVERIFY(!copyInfo.isRegistered());
        QVERIFY(!copyInfo.isComplete());

        QCOMPARE(copyInfo.serviceName(), serviceName);
        QCOMPARE(copyInfo.device().address(), deviceInfo.address());
    }

    {
        QBluetoothServiceInfo copyInfo;

        QVERIFY(!copyInfo.isValid());
        QVERIFY(!copyInfo.isRegistered());
        QVERIFY(!copyInfo.isComplete());

        copyInfo = serviceInfo;

        QVERIFY(copyInfo.isValid());
        QVERIFY(!copyInfo.isRegistered());
        QVERIFY(!copyInfo.isComplete());

        QCOMPARE(copyInfo.serviceName(), serviceName);
        QCOMPARE(copyInfo.device().address(), deviceInfo.address());
    }

    {
        QBluetoothServiceInfo copyInfo1;
        QBluetoothServiceInfo copyInfo2;

        QVERIFY(!copyInfo1.isValid());
        QVERIFY(!copyInfo1.isRegistered());
        QVERIFY(!copyInfo1.isComplete());
        QVERIFY(!copyInfo2.isValid());
        QVERIFY(!copyInfo2.isRegistered());
        QVERIFY(!copyInfo2.isComplete());

        copyInfo1 = copyInfo2 = serviceInfo;

        QVERIFY(copyInfo1.isValid());
        QVERIFY(!copyInfo1.isRegistered());
        QVERIFY(!copyInfo1.isComplete());
        QVERIFY(copyInfo2.isValid());
        QVERIFY(!copyInfo2.isRegistered());
        QVERIFY(!copyInfo2.isComplete());

        QCOMPARE(copyInfo1.serviceName(), serviceName);
        QCOMPARE(copyInfo2.serviceName(), serviceName);
        QCOMPARE(copyInfo1.device().address(), deviceInfo.address());
        QCOMPARE(copyInfo2.device().address(), deviceInfo.address());
    }

    {
        QBluetoothServiceInfo copyInfo;
        QVERIFY(!copyInfo.isValid());
        QVERIFY(!copyInfo.isRegistered());
        QVERIFY(!copyInfo.isComplete());
        copyInfo = serviceInfo;
        QVERIFY(copyInfo.contains(QBluetoothServiceInfo::ServiceName));

        copyInfo.setAttribute(QBluetoothServiceInfo::ProtocolDescriptorList, QBluetoothUuid(uuid));
        QVERIFY(copyInfo.contains(QBluetoothServiceInfo::ProtocolDescriptorList));
        QVERIFY(copyInfo.isComplete());
        QVERIFY(copyInfo.attributes().count() > 0);

        copyInfo.removeAttribute(QBluetoothServiceInfo::ProtocolDescriptorList);
        QVERIFY(!copyInfo.contains(QBluetoothServiceInfo::ProtocolDescriptorList));
        QVERIFY(!copyInfo.isComplete());
    }

    {
        QBluetoothServiceInfo copyInfo;
        QVERIFY(!copyInfo.isValid());
        copyInfo = serviceInfo;

        QVERIFY(copyInfo.serverChannel() == -1);
        QVERIFY(copyInfo.protocolServiceMultiplexer() == -1);

        QBluetoothServiceInfo::Sequence protocolDescriptorList;
        QBluetoothServiceInfo::Sequence protocol;
        protocol << QVariant::fromValue(QBluetoothUuid(protocolUuid));
        protocolDescriptorList.append(QVariant::fromValue(protocol));
        protocol.clear();

        protocolDescriptorList.append(QVariant::fromValue(protocol));
        copyInfo.setAttribute(QBluetoothServiceInfo::ProtocolDescriptorList,
                                 protocolDescriptorList);
        if (serviceInfoProtocol == QBluetoothServiceInfo::L2capProtocol) {
            QVERIFY(copyInfo.serverChannel() == -1);
            QVERIFY(copyInfo.protocolServiceMultiplexer() != -1);
        } else if (serviceInfoProtocol == QBluetoothServiceInfo::RfcommProtocol) {
            QVERIFY(copyInfo.serverChannel() != -1);
            QVERIFY(copyInfo.protocolServiceMultiplexer() == -1);
        }

        QVERIFY(copyInfo.socketProtocol() == serviceInfoProtocol);
    }

    {
        QBluetoothServiceInfo copyInfo;

        QVERIFY(!copyInfo.isValid());
        copyInfo = serviceInfo;
        copyInfo.setServiceUuid(QBluetoothUuid::SerialPort);
        QVERIFY(!copyInfo.isRegistered());

        if (!QBluetoothLocalDevice::allDevices().count()) {
            QSKIP("Skipping test due to missing Bluetooth device");
        } else if (protocolSupported) {
            QBluetoothServer server(serviceInfoProtocol);
            QVERIFY(server.listen());
            QTRY_VERIFY_WITH_TIMEOUT(server.isListening(), 5000);
            QVERIFY(server.serverPort() > 0);

            QBluetoothServiceInfo::Sequence protocolDescriptorList;
            QBluetoothServiceInfo::Sequence protocol;
            protocol << QVariant::fromValue(QBluetoothUuid(QBluetoothUuid::L2cap));

            if (serviceInfoProtocol == QBluetoothServiceInfo::L2capProtocol) {
                protocol << QVariant::fromValue(server.serverPort());
                protocolDescriptorList.append(QVariant::fromValue(protocol));
            } else if (serviceInfoProtocol == QBluetoothServiceInfo::RfcommProtocol) {
                protocolDescriptorList.append(QVariant::fromValue(protocol));
                protocol.clear();
                protocol << QVariant::fromValue(QBluetoothUuid(QBluetoothUuid::Rfcomm))
                         << QVariant::fromValue(quint8(server.serverPort()));
                protocolDescriptorList.append(QVariant::fromValue(protocol));
            }

            serviceInfo.setAttribute(QBluetoothServiceInfo::ProtocolDescriptorList,
                                     protocolDescriptorList);

            QVERIFY(copyInfo.registerService());
            QVERIFY(copyInfo.isRegistered());
            QVERIFY(serviceInfo.isRegistered());
            QBluetoothServiceInfo secondCopy;
            secondCopy = copyInfo;
            QVERIFY(secondCopy.isRegistered());

            QVERIFY(secondCopy.unregisterService());
            QVERIFY(!copyInfo.isRegistered());
            QVERIFY(!secondCopy.isRegistered());
            QVERIFY(!serviceInfo.isRegistered());
            QVERIFY(server.isListening());
            server.close();
            QVERIFY(!server.isListening());
        }
    }
}
コード例 #9
0
void RemoteSelector::serviceDiscovered(const QBluetoothServiceInfo &serviceInfo)
{
#if 0
    qDebug() << "Discovered service on"
             << serviceInfo.device().name() << serviceInfo.device().address().toString();
    qDebug() << "\tService name:" << serviceInfo.serviceName();
    qDebug() << "\tDescription:"
             << serviceInfo.attribute(QBluetoothServiceInfo::ServiceDescription).toString();
    qDebug() << "\tProvider:"
             << serviceInfo.attribute(QBluetoothServiceInfo::ServiceProvider).toString();
    qDebug() << "\tL2CAP protocol service multiplexer:"
             << serviceInfo.protocolServiceMultiplexer();
    qDebug() << "\tRFCOMM server channel:" << serviceInfo.serverChannel();
#endif

    QString remoteName;
    if (serviceInfo.device().name().isEmpty())
        remoteName = serviceInfo.device().address().toString();
    else
        remoteName = serviceInfo.device().name();

//    QListWidgetItem *item =
//        new QListWidgetItem(QString::fromLatin1("%1\t%2\t%3").arg(serviceInfo.device().address().toString(),
//                                                             serviceInfo.device().name(), serviceInfo.serviceName()));

    QMutableMapIterator<int, QBluetoothServiceInfo> i(m_discoveredServices);
    while(i.hasNext()){
        i.next();
        if(serviceInfo.device().address() == i.value().device().address()){
            i.setValue(serviceInfo);
            return;
        }
    }

    int row = ui->remoteDevices->rowCount();
    ui->remoteDevices->insertRow(row);
    QTableWidgetItem *item = new QTableWidgetItem(serviceInfo.device().address().toString());
    ui->remoteDevices->setItem(row, 0, item);
    item = new QTableWidgetItem(serviceInfo.device().name());
    ui->remoteDevices->setItem(row, 1, item);
    item = new QTableWidgetItem(serviceInfo.serviceName());

    ui->remoteDevices->setItem(row, 2, item);

    QBluetoothLocalDevice::Pairing p;

    p = m_localDevice->pairingStatus(serviceInfo.device().address());

    ui->remoteDevices->blockSignals(true);

    item = new QTableWidgetItem();
    if((p&QBluetoothLocalDevice::Paired) || (p&QBluetoothLocalDevice::AuthorizedPaired))
        item->setCheckState(Qt::Checked);
    else
        item->setCheckState(Qt::Unchecked);
    ui->remoteDevices->setItem(row, 3, item);

    item = new QTableWidgetItem();
    if(p&QBluetoothLocalDevice::AuthorizedPaired)
        item->setCheckState(Qt::Checked);
    else
        item->setCheckState(Qt::Unchecked);

    ui->remoteDevices->setItem(row, 4, item);

    ui->remoteDevices->blockSignals(false);


    m_discoveredServices.insert(row, serviceInfo);
}
コード例 #10
0
void QBluetoothTransferReplySymbian::serviceDiscovered(const QBluetoothServiceInfo &info)
{
    m_port = info.serverChannel();
}