void GraphicalArrayTest::test_removeItems()
{
GraphicalArray * value = new GraphicalArray();
QPushButton * button = findRemoveButton(value);
QStringListModel * model = findModel(value);
QListView * view = findListView(value);
QItemSelectionModel::SelectionFlags flag = QItemSelectionModel::Select;
model->setStringList( QStringList() << "Hello" << "World" << "and" << "Happy" << "New" << "Year!" );
value->show();
view->selectionModel()->select( model->index(0), flag ); // select "Hello"
view->selectionModel()->select( model->index(1), flag ); // select "World"
view->selectionModel()->select( model->index(3), flag ); // select "Happy"
view->selectionModel()->select( model->index(5), flag ); // select "Year"
// simulate a click on the 'Remove' button
QTest::mouseClick( button, Qt::LeftButton );
QStringList values = model->stringList();
QCOMPARE( values.count(), 2 );
QCOMPARE( values.at(0), QString("and") );
QCOMPARE( values.at(1), QString("New") );
delete value;
}
void QQBoardsSettings::addBouchot()
{
QQBouchotSettingsDialog bouchotSettingsDialog(this);
bouchotSettingsDialog.setGroups(m_listGroups);
bouchotSettingsDialog.setNames(m_listNames);
if(bouchotSettingsDialog.exec() == QDialog::Accepted)
{
QQBouchot::QQBouchotSettings bSettings = bouchotSettingsDialog.bouchotSettings();
QString bouchotName = bouchotSettingsDialog.bouchotName();
if(m_listNames.contains(bouchotName))
{
qWarning() << "Trying to insert a bouchot with an already existing name, that's forbidden";
}
else
{
m_listNames.append(bouchotName);
if(! m_listGroups.contains(bSettings.group()))
m_listGroups.append(bSettings.group());
QStringListModel *model = (QStringListModel *) ui->bouchotListView->model();
int numRow = model->rowCount();
model->insertRows(numRow,1);
model->setData(model->index(numRow), QVariant(bouchotName));
m_newBouchots.insert(bouchotName, bSettings);
m_oldBouchots.removeAll(bouchotName);
}
}
}
void QQBoardsSettings::olccsAddBouchot()
{
QQBoardWizard wizard(this);
if(wizard.exec() == QDialog::Accepted)
{
QQBouchot::QQBouchotSettings bSettings = wizard.bouchotSettings();
QString bouchotName = wizard.bouchotName();
if(m_listNames.contains(bouchotName))
{
qWarning() << "Trying to insert a bouchot with an already existing name, that's forbidden";
}
else
{
m_listNames.append(bouchotName);
if(! m_listGroups.contains(bSettings.group()))
m_listGroups.append(bSettings.group());
QStringListModel *model = (QStringListModel *) ui->bouchotListView->model();
int numRow = model->rowCount();
model->insertRows(numRow, 1);
model->setData(model->index(numRow), QVariant(bouchotName));
m_newBouchots.insert(bouchotName, bSettings);
m_oldBouchots.removeAll(bouchotName);
}
if(wizard.showAdvanced())
{
QStringListModel *model = (QStringListModel *) ui->bouchotListView->model();
QItemSelectionModel *selModel = ui->bouchotListView->selectionModel();
for(int i = 0; i < model->rowCount(); i++)
{
QModelIndex mIndex = model->index(i);
if(model->data(mIndex, Qt::EditRole).toString() == bouchotName)
{
selModel->select(mIndex, QItemSelectionModel::ClearAndSelect);
editBouchot();
}
}
}
}
}
void QQBoardsSettings::setBouchots(const QMap<QString, QQBouchot::QQBouchotSettings> currentListBouchot)
{
m_bouchots = currentListBouchot;
QStringListModel *model = (QStringListModel *) ui->bouchotListView->model();
model->removeRows(0, model->rowCount());
model->insertRows(0, m_bouchots.size());
m_listNames = currentListBouchot.keys();
QMapIterator<QString, QQBouchot::QQBouchotSettings> i(m_bouchots);
int index = 0;
while(i.hasNext())
{
i.next();
QQBouchot::QQBouchotSettings settings = i.value();
if(! m_listGroups.contains(settings.group()))
m_listGroups.append(settings.group());
model->setData(model->index(index++), QVariant(i.key()));
}
}
int LzExcelOutput::outputMultiTunnels(ClearanceMultiTunnels * inputdata, QString templatepath, QString outputfile, QString insertimgpath)
{
QString templatename = "MultiTunnelsTemplate.xls";
int ret = copy(templatepath, templatename, outputfile);
if (ret != 0)
return ret;
// 插入图片路径不存在
if (!QFile(insertimgpath).exists())
return 3;
//操作已经存在的excel，生成限界尺寸表
ExcelEngine excel;
excel.Open(outputfile, 1, false);
QString linename = inputdata->getLineName();
// 限界表名称
excel.SetCellData(1,1,QObject::tr("%1-区段桥隧综合最小建筑限界尺寸表").arg(linename));
excel.SetCellData(52,1,QObject::tr("%1-区段桥隧综合最小建筑限界尺寸图").arg(linename));
// 线路名称
excel.SetCellData(3,3,linename);
excel.SetCellData(54,2,linename);
excel.SetCellData(54,5,linename);
// 区段
excel.SetCellData(3,9,linename);
QString endStationName = inputdata->getEndStationName();
// 面向站名
excel.SetCellData(3,15,endStationName);
excel.SetCellData(54,13,endStationName);
QStringListModel * tunnelsmodel = inputdata->getTunnelsNames();
// 桥隧总数
excel.SetCellData(4,4,tunnelsmodel->rowCount());
// 桥梁数
excel.SetCellData(4,11,inputdata->getNumOfOutOfClearanceBridges());
// 隧道数
excel.SetCellData(4,14,inputdata->getNumOfOutOfClearanceTunnels());
// 时间
// 采集日期
QModelIndex index = tunnelsmodel->index(0,0);
QString tunnelinfo = index.data().toString();//这两行代码获取QStringListModel中第一行的值
QStringList strlist = tunnelinfo.split("-");
if (strlist.length() < 3)
return -1;
QString collectdate = strlist.at(2);
excel.SetCellData(49,15,collectdate);
excel.SetCellData(54,16,collectdate);
// 最小曲线半径
int minRadius = inputdata->getMinRadius();
excel.SetCellData(5,5,minRadius);
// 最大外轨超高
excel.SetCellData(5,10,inputdata->getWaiGuiChaoGao());
// 最低接触网高度
excel.SetCellData(5,16,inputdata->getJieChuWangGaoDu());
ClearanceData * data = &inputdata->getClearanceStraightData();
int rowcount = data->getMaps().size();
// Excel模板从第10行开始为高度限界数据，前面几行为表头或空格
int startrownum = 10;
int startcolumnnumdef = 1;
// 临时变量
int startcolumnnum = startcolumnnumdef;
float tmpval;
_int64 tmppos;
int tmpradius;
float minHeight;
for (int i = 0; i < 3; i++)
{
startcolumnnum = startcolumnnumdef;
switch(i)
{
case Curve_Straight:
if (inputdata->getNumOfStraight())
{
data = &inputdata->getClearanceStraightData();
startcolumnnum += LzOutputTableColumn::Straight_Left_Val;
}
else
continue;
break;
case Curve_Left:
if (inputdata->getNumOfLeft())
{
data = &inputdata->getClearanceLeftData();
startcolumnnum += LzOutputTableColumn::LeftCurve_Left_Val;
}
else
continue;
break;
case Curve_Right:
if (inputdata->getNumOfRight())
{
data = &inputdata->getClearanceRightData();
startcolumnnum += LzOutputTableColumn::RightCurve_Left_Val;
}
else
continue;
break;
default:
break;
}
minHeight = data->getMinCenterHeight();
// map反向遍历，正向为高度从小到大，插入图表是需要高度从大到小
std::map<int, ClearanceItem>::reverse_iterator it = data->getMaps().rbegin();
int k = 0; // 相对行数
while (it != data->getMaps().rend())
{
std::pair<int, ClearanceItem> pair = (*it);
if (pair.first > minHeight)
{
it++;
k++;
continue;
}
// 此处写要插入的内容
if (pair.second.leftval >= 0)
excel.SetCellData(k + startrownum, startcolumnnum, pair.second.leftval);
if (pair.second.rightval >= 0)
excel.SetCellData(k + startrownum, startcolumnnum + 1, pair.second.rightval);
if (i == Curve_Straight) // 直线
{
if (pair.second.leftval >= 0)
{
excel.SetCellData(k + startrownum, startcolumnnum + 2, toTunnelPosString2(pair.second.leftpos, pair.second.lefttunnelid, "0"));
qDebug() << toTunnelPosString2(pair.second.leftpos, pair.second.lefttunnelid, "0");
}
if (pair.second.rightval >= 0)
{
excel.SetCellData(k + startrownum, startcolumnnum + 3, toTunnelPosString2(pair.second.rightpos, pair.second.righttunnelid, "0"));
qDebug() << toTunnelPosString2(pair.second.rightpos, pair.second.righttunnelid, "0");
}
}
else
{
if (pair.second.leftval >= 0)
{
excel.SetCellData(k + startrownum, startcolumnnum + 2, pair.second.leftradius);
excel.SetCellData(k + startrownum, startcolumnnum + 4, toTunnelPosString2(pair.second.leftpos, pair.second.lefttunnelid, "0"));
qDebug() << toTunnelPosString2(pair.second.leftpos, pair.second.lefttunnelid, "0");
}
if (pair.second.rightval >= 0)
{
excel.SetCellData(k + startrownum, startcolumnnum + 3, pair.second.rightradius);
excel.SetCellData(k + startrownum, startcolumnnum + 5, toTunnelPosString2(pair.second.rightpos, pair.second.righttunnelid, "0"));
qDebug() << toTunnelPosString2(pair.second.rightpos, pair.second.righttunnelid, "0");
}
}
it++;
k++;
}
}
// <150高度手动输入？ ///TODO
// 线路中心线上方最低净高mm
excel.SetCellData(rowcount+startrownum+1,9, inputdata->getMinHeight());
excel.setProperty("DisplayAlerts", 0);
// 保存
excel.Save();
excel.Close();
// 生成限界图
initExcelEngine();
QAxObject *workBooks1 = excel1->querySubObject("Workbooks");
workBooks1->dynamicCall("Open(const QString&)", outputfile);
QAxObject *workBook1 = excel1->querySubObject("ActiveWorkBook");
QAxObject *sheets1 = workBook1->querySubObject("WorkSheets");
QAxObject *sheet1 = sheets1->querySubObject("Item(int)", 1);//获得第一个工作表
// QAxObject *range=sheet1->querySubObject("Range(const QVariant&)",QVariant(QString("D52:AA92")));
// range->dynamicCall("Clear()");//指定清除某个区域
/////////////AddPicture函数详解////////////////
// AddPicture(FileName, LinkToFile, SaveWithDocument, Left, Top, Width, Height)中7个参数的意思。
// (1)FileName 必选 String 图片的路径和文件名。
// (2)LinkToFile 可选 Variant 如果该参数值为 True，则将图片链接到创建它的文件。如果该参数值为 False，则将图片作为该文件的独立副本。默认值为 False。
// (3)SaveWithDocument 可选 Variant 如果该参数值为 True，则将链接的图片与文档一起保存。默认值为 False。
// (4)Left 可选 Variant 新图片的左边缘相对于绘图画布的位置，以磅为单位。
// (5)Top 可选 Variant 新图片的上边缘相对于绘图画布的位置，以磅为单位。
// (6)Width 可选 Variant 图片的宽度，以磅为单位。
// (7)Height 可选 Variant 图片的高度，以磅为单位。
///////////////////////////////////////////////
// @author 熊雪、范翔。路径变成反斜杠，否则AddPicture，SaveAs函数出错
outputfile = toBackSlashStr(outputfile);
insertimgpath = toBackSlashStr(insertimgpath);
QAxObject *shapes1 = sheet1->querySubObject("Shapes");
shapes1->dynamicCall("AddPicture(QString&,bool,bool,double,double,double,double",QString("%1").arg(insertimgpath),true,true,8,770,510,595);//8,750,510,627 QString("%1image.jpg").arg(outputfile)
excel1->setProperty("DisplayAlerts", 0);
//excel1->dynamicCall("Save()");
workBook1->dynamicCall("SaveAs(const QString&)", outputfile);
// QMessageBox::information(NULL, tr("OK"), tr("成功生成Excel文件！"),QMessageBox::Yes | QMessageBox::No);
excel1->dynamicCall("Quit()");
return 0;
}