void QgsGeometryCheck::deleteFeatureGeometryRing( const QString &layerId, QgsFeature &feature, int partIdx, int ringIdx, Changes &changes ) const
{
QgsFeaturePool *featurePool = mContext->featurePools[layerId];
QgsGeometry featureGeom = feature.geometry();
QgsAbstractGeometry *partGeom = QgsGeometryCheckerUtils::getGeomPart( featureGeom.get(), partIdx );
if ( dynamic_cast<QgsCurvePolygon *>( partGeom ) )
{
// If we delete the exterior ring of a polygon, it makes no sense to keep the interiors
if ( ringIdx == 0 )
{
deleteFeatureGeometryPart( layerId, feature, partIdx, changes );
}
else
{
static_cast<QgsCurvePolygon *>( partGeom )->removeInteriorRing( ringIdx - 1 );
feature.setGeometry( featureGeom );
featurePool->updateFeature( feature );
changes[layerId][feature.id()].append( Change( ChangeRing, ChangeRemoved, QgsVertexId( partIdx, ringIdx ) ) );
}
}
// Other geometry types do not have rings, remove the entire part
else
{
deleteFeatureGeometryPart( layerId, feature, partIdx, changes );
}
}
void QgsGeometryCheck::deleteFeatureGeometryPart( const QString &layerId, QgsFeature &feature, int partIdx, Changes &changes ) const
{
QgsFeaturePool *featurePool = mContext->featurePools[layerId];
QgsGeometry featureGeom = feature.geometry();
QgsAbstractGeometry *geom = featureGeom.get();
if ( dynamic_cast<QgsGeometryCollection *>( geom ) )
{
static_cast<QgsGeometryCollection *>( geom )->removeGeometry( partIdx );
if ( static_cast<QgsGeometryCollection *>( geom )->numGeometries() == 0 )
{
featurePool->deleteFeature( feature.id() );
changes[layerId][feature.id()].append( Change( ChangeFeature, ChangeRemoved ) );
}
else
{
feature.setGeometry( featureGeom );
featurePool->updateFeature( feature );
changes[layerId][feature.id()].append( Change( ChangePart, ChangeRemoved, QgsVertexId( partIdx ) ) );
}
}
else
{
featurePool->deleteFeature( feature.id() );
changes[layerId][feature.id()].append( Change( ChangeFeature, ChangeRemoved ) );
}
}
void QgsGeometryDuplicateNodesCheck::fixError( const QMap<QString, QgsFeaturePool *> &featurePools, QgsGeometryCheckError *error, int method, const QMap<QString, int> & /*mergeAttributeIndices*/, Changes &changes ) const
{
QgsFeaturePool *featurePool = featurePools[ error->layerId() ];
QgsFeature feature;
if ( !featurePool->getFeature( error->featureId(), feature ) )
{
error->setObsolete();
return;
}
QgsGeometry featureGeom = feature.geometry();
QgsAbstractGeometry *geom = featureGeom.get();
QgsVertexId vidx = error->vidx();
// Check if point still exists
if ( !vidx.isValid( geom ) )
{
error->setObsolete();
return;
}
// Check if error still applies
int nVerts = QgsGeometryCheckerUtils::polyLineSize( geom, vidx.part, vidx.ring );
QgsPoint pi = geom->vertexAt( QgsVertexId( vidx.part, vidx.ring, ( vidx.vertex + nVerts - 1 ) % nVerts ) );
QgsPoint pj = geom->vertexAt( error->vidx() );
if ( QgsGeometryUtils::sqrDistance2D( pi, pj ) >= mContext->tolerance )
{
error->setObsolete();
return;
}
// Fix error
if ( method == NoChange )
{
error->setFixed( method );
}
else if ( method == RemoveDuplicates )
{
if ( !QgsGeometryCheckerUtils::canDeleteVertex( geom, vidx.part, vidx.ring ) )
{
error->setFixFailed( tr( "Resulting geometry is degenerate" ) );
}
else if ( !geom->deleteVertex( error->vidx() ) )
{
error->setFixFailed( tr( "Failed to delete vertex" ) );
}
else
{
feature.setGeometry( featureGeom );
featurePool->updateFeature( feature );
error->setFixed( method );
changes[error->layerId()][error->featureId()].append( Change( ChangeNode, ChangeRemoved, error->vidx() ) );
}
}
else
{
error->setFixFailed( tr( "Unknown method" ) );
}
}
void QgsGeometryMultipartCheck::fixError( const QMap<QString, QgsFeaturePool *> &featurePools, QgsGeometryCheckError *error, int method, const QMap<QString, int> & /*mergeAttributeIndices*/, Changes &changes ) const
{
QgsFeaturePool *featurePool = featurePools[ error->layerId() ];
QgsFeature feature;
if ( !featurePool->getFeature( error->featureId(), feature ) )
{
error->setObsolete();
return;
}
QgsGeometry featureGeom = feature.geometry();
const QgsAbstractGeometry *geom = featureGeom.constGet();
// Check if error still applies
if ( geom->partCount() > 1 || !QgsWkbTypes::isMultiType( geom->wkbType() ) )
{
error->setObsolete();
return;
}
// Fix error
if ( method == NoChange )
{
error->setFixed( method );
}
else if ( method == ConvertToSingle )
{
feature.setGeometry( QgsGeometry( QgsGeometryCheckerUtils::getGeomPart( geom, 0 )->clone() ) );
featurePool->updateFeature( feature );
error->setFixed( method );
changes[error->layerId()][feature.id()].append( Change( ChangeFeature, ChangeChanged ) );
}
else if ( method == RemoveObject )
{
featurePool->deleteFeature( feature.id() );
error->setFixed( method );
changes[error->layerId()][feature.id()].append( Change( ChangeFeature, ChangeRemoved ) );
}
else
{
error->setFixFailed( tr( "Unknown method" ) );
}
}
void QgsGeometryCheck::replaceFeatureGeometryPart( const QString &layerId, QgsFeature &feature, int partIdx, QgsAbstractGeometry *newPartGeom, Changes &changes ) const
{
QgsFeaturePool *featurePool = mContext->featurePools[layerId];
QgsGeometry featureGeom = feature.geometry();
QgsAbstractGeometry *geom = featureGeom.get();
if ( QgsGeometryCollection *geomCollection = dynamic_cast< QgsGeometryCollection *>( geom ) )
{
geomCollection->removeGeometry( partIdx );
geomCollection->addGeometry( newPartGeom );
changes[layerId][feature.id()].append( Change( ChangePart, ChangeRemoved, QgsVertexId( partIdx ) ) );
changes[layerId][feature.id()].append( Change( ChangePart, ChangeAdded, QgsVertexId( geomCollection->partCount() - 1 ) ) );
feature.setGeometry( featureGeom );
}
else
{
feature.setGeometry( QgsGeometry( newPartGeom ) );
changes[layerId][feature.id()].append( Change( ChangeFeature, ChangeChanged ) );
}
featurePool->updateFeature( feature );
}
void QgsGeometryOverlapCheck::fixError( QgsGeometryCheckError *error, int method, const QMap<QString, int> & /*mergeAttributeIndices*/, Changes &changes ) const
{
QString errMsg;
QgsGeometryOverlapCheckError *overlapError = static_cast<QgsGeometryOverlapCheckError *>( error );
QgsFeaturePool *featurePoolA = mContext->featurePools[ overlapError->layerId() ];
QgsFeaturePool *featurePoolB = mContext->featurePools[ overlapError->overlappedFeature().first ];
QgsFeature featureA;
QgsFeature featureB;
if ( !featurePoolA->get( overlapError->featureId(), featureA ) ||
!featurePoolB->get( overlapError->overlappedFeature().second, featureB ) )
{
error->setObsolete();
return;
}
// Check if error still applies
QgsGeometryCheckerUtils::LayerFeature layerFeatureA( featurePoolA, featureA, true );
QgsGeometryCheckerUtils::LayerFeature layerFeatureB( featurePoolB, featureB, true );
std::unique_ptr< QgsGeometryEngine > geomEngineA = QgsGeometryCheckerUtils::createGeomEngine( layerFeatureA.geometry(), mContext->reducedTolerance );
if ( !geomEngineA->overlaps( layerFeatureB.geometry() ) )
{
error->setObsolete();
return;
}
std::unique_ptr< QgsAbstractGeometry > interGeom( geomEngineA->intersection( layerFeatureB.geometry(), &errMsg ) );
if ( !interGeom )
{
error->setFixFailed( tr( "Failed to compute intersection between overlapping features: %1" ).arg( errMsg ) );
return;
}
// Search which overlap part this error parametrizes (using fuzzy-matching of the area and centroid...)
QgsAbstractGeometry *interPart = nullptr;
for ( int iPart = 0, nParts = interGeom->partCount(); iPart < nParts; ++iPart )
{
QgsAbstractGeometry *part = QgsGeometryCheckerUtils::getGeomPart( interGeom.get(), iPart );
if ( std::fabs( part->area() - overlapError->value().toDouble() ) < mContext->reducedTolerance &&
QgsGeometryCheckerUtils::pointsFuzzyEqual( part->centroid(), overlapError->location(), mContext->reducedTolerance ) )
{
interPart = part;
break;
}
}
if ( !interPart || interPart->isEmpty() )
{
error->setObsolete();
return;
}
// Fix error
if ( method == NoChange )
{
error->setFixed( method );
}
else if ( method == Subtract )
{
std::unique_ptr< QgsAbstractGeometry > diff1( geomEngineA->difference( interPart, &errMsg ) );
if ( !diff1 || diff1->isEmpty() )
{
diff1.reset();
}
else
{
QgsGeometryCheckerUtils::filter1DTypes( diff1.get() );
}
std::unique_ptr< QgsGeometryEngine > geomEngineB = QgsGeometryCheckerUtils::createGeomEngine( layerFeatureB.geometry(), mContext->reducedTolerance );
std::unique_ptr< QgsAbstractGeometry > diff2( geomEngineB->difference( interPart, &errMsg ) );
if ( !diff2 || diff2->isEmpty() )
{
diff2.reset();
}
else
{
QgsGeometryCheckerUtils::filter1DTypes( diff2.get() );
}
double shared1 = diff1 ? QgsGeometryCheckerUtils::sharedEdgeLength( diff1.get(), interPart, mContext->reducedTolerance ) : 0;
double shared2 = diff2 ? QgsGeometryCheckerUtils::sharedEdgeLength( diff2.get(), interPart, mContext->reducedTolerance ) : 0;
if ( !diff1 || !diff2 || shared1 == 0. || shared2 == 0. )
{
error->setFixFailed( tr( "Could not find shared edges between intersection and overlapping features" ) );
}
else
{
if ( shared1 < shared2 )
{
diff1->transform( featurePoolA->getLayerToMapTransform(), QgsCoordinateTransform::ReverseTransform );
featureA.setGeometry( QgsGeometry( std::move( diff1 ) ) );
changes[error->layerId()][featureA.id()].append( Change( ChangeFeature, ChangeChanged ) );
featurePoolA->updateFeature( featureA );
}
else
{
diff2->transform( featurePoolB->getLayerToMapTransform(), QgsCoordinateTransform::ReverseTransform );
featureB.setGeometry( QgsGeometry( std::move( diff2 ) ) );
changes[overlapError->overlappedFeature().first][featureB.id()].append( Change( ChangeFeature, ChangeChanged ) );
featurePoolB->updateFeature( featureB );
}
error->setFixed( method );
}
}
else
{
error->setFixFailed( tr( "Unknown method" ) );
}
}
void QgsGeometryTypeCheck::fixError( QgsGeometryCheckError *error, int method, const QMap<QString, int> & /*mergeAttributeIndices*/, Changes &changes ) const
{
QgsFeaturePool *featurePool = mContext->featurePools[ error->layerId() ];
QgsFeature feature;
if ( !featurePool->get( error->featureId(), feature ) )
{
error->setObsolete();
return;
}
QgsGeometry featureGeom = feature.geometry();
const QgsAbstractGeometry *geom = featureGeom.constGet();
// Check if error still applies
QgsWkbTypes::Type type = QgsWkbTypes::flatType( geom->wkbType() );
if ( ( mAllowedTypes & ( 1 << type ) ) != 0 )
{
error->setObsolete();
return;
}
// Fix with selected method
if ( method == NoChange )
{
error->setFixed( method );
}
else if ( method == Convert )
{
// Check if corresponding single type is allowed
if ( QgsWkbTypes::isMultiType( type ) && ( ( 1 << QgsWkbTypes::singleType( type ) ) & mAllowedTypes ) != 0 )
{
// Explode multi-type feature into single-type features
for ( int iPart = 1, nParts = geom->partCount(); iPart < nParts; ++iPart )
{
QgsFeature newFeature;
newFeature.setAttributes( feature.attributes() );
newFeature.setGeometry( QgsGeometry( QgsGeometryCheckerUtils::getGeomPart( geom, iPart )->clone() ) );
featurePool->addFeature( newFeature );
changes[error->layerId()][newFeature.id()].append( Change( ChangeFeature, ChangeAdded ) );
}
// Recycle feature for part 0
feature.setGeometry( QgsGeometry( QgsGeometryCheckerUtils::getGeomPart( geom, 0 )->clone() ) );
featurePool->updateFeature( feature );
changes[error->layerId()][feature.id()].append( Change( ChangeFeature, ChangeChanged ) );
}
// Check if corresponding multi type is allowed
else if ( QgsWkbTypes::isSingleType( type ) && ( ( 1 << QgsWkbTypes::multiType( type ) ) & mAllowedTypes ) != 0 )
{
QgsGeometryCollection *geomCollection = nullptr;
switch ( QgsWkbTypes::multiType( type ) )
{
case QgsWkbTypes::MultiPoint:
{
geomCollection = new QgsMultiPoint();
break;
}
case QgsWkbTypes::MultiLineString:
{
geomCollection = new QgsMultiLineString();
break;
}
case QgsWkbTypes::MultiPolygon:
{
geomCollection = new QgsMultiPolygon();
break;
}
case QgsWkbTypes::MultiCurve:
{
geomCollection = new QgsMultiCurve();
break;
}
case QgsWkbTypes::MultiSurface:
{
geomCollection = new QgsMultiSurface();
break;
}
default:
break;
}
if ( !geomCollection )
{
error->setFixFailed( tr( "Unknown geometry type" ) );
}
else
{
geomCollection->addGeometry( geom->clone() );
feature.setGeometry( QgsGeometry( geomCollection ) );
featurePool->updateFeature( feature );
changes[error->layerId()][feature.id()].append( Change( ChangeFeature, ChangeChanged ) );
}
}
// Delete feature
else
{
featurePool->deleteFeature( feature.id() );
changes[error->layerId()][error->featureId()].append( Change( ChangeFeature, ChangeRemoved ) );
}
error->setFixed( method );
}
else if ( method == Delete )
{
featurePool->deleteFeature( feature.id() );
error->setFixed( method );
changes[error->layerId()][error->featureId()].append( Change( ChangeFeature, ChangeRemoved ) );
}
else
{
error->setFixFailed( tr( "Unknown method" ) );
}
}
void QgsGeometrySelfIntersectionCheck::fixError( QgsGeometryCheckError *error, int method, const QMap<QString, int> & /*mergeAttributeIndices*/, Changes &changes ) const
{
QgsFeaturePool *featurePool = mContext->featurePools[ error->layerId() ];
QgsFeature feature;
if ( !featurePool->getFeature( error->featureId(), feature ) )
{
error->setObsolete();
return;
}
QgsGeometry featureGeom = feature.geometry();
QgsAbstractGeometry *geom = featureGeom.get();
QgsVertexId vidx = error->vidx();
// Check if ring still exists
if ( !vidx.isValid( geom ) )
{
error->setObsolete();
return;
}
const QgsGeometryUtils::SelfIntersection &inter = static_cast<QgsGeometrySelfIntersectionCheckError *>( error )->intersection();
// Check if error still applies
bool ringIsClosed = false;
int nVerts = QgsGeometryCheckerUtils::polyLineSize( geom, vidx.part, vidx.ring, &ringIsClosed );
if ( nVerts == 0 || inter.segment1 >= nVerts || inter.segment2 >= nVerts )
{
error->setObsolete();
return;
}
QgsPoint p1 = geom->vertexAt( QgsVertexId( vidx.part, vidx.ring, inter.segment1 ) );
QgsPoint q1 = geom->vertexAt( QgsVertexId( vidx.part, vidx.ring, inter.segment2 ) );
QgsPoint p2 = geom->vertexAt( QgsVertexId( vidx.part, vidx.ring, ( inter.segment1 + 1 ) % nVerts ) );
QgsPoint q2 = geom->vertexAt( QgsVertexId( vidx.part, vidx.ring, ( inter.segment2 + 1 ) % nVerts ) );
QgsPoint s;
bool intersection = false;
if ( !QgsGeometryUtils::segmentIntersection( p1, p2, q1, q2, s, intersection, mContext->tolerance ) )
{
error->setObsolete();
return;
}
// Fix with selected method
if ( method == NoChange )
{
error->setFixed( method );
}
else if ( method == ToMultiObject || method == ToSingleObjects )
{
// Extract rings
QgsPointSequence ring1, ring2;
bool ring1EndsWithS = false;
bool ring2EndsWithS = false;
for ( int i = 0; i < nVerts; ++i )
{
if ( i <= inter.segment1 || i >= inter.segment2 + 1 )
{
ring1.append( geom->vertexAt( QgsVertexId( vidx.part, vidx.ring, i ) ) );
ring1EndsWithS = false;
if ( i == inter.segment2 + 1 )
{
ring2.append( s );
ring2EndsWithS = true;
}
}
else
{
ring2.append( geom->vertexAt( QgsVertexId( vidx.part, vidx.ring, i ) ) );
ring2EndsWithS = true;
if ( i == inter.segment1 + 1 )
{
ring1.append( s );
ring1EndsWithS = false;
}
}
}
if ( nVerts == inter.segment2 + 1 )
{
ring2.append( s );
ring2EndsWithS = true;
}
if ( ringIsClosed || ring1EndsWithS )
ring1.append( ring1.front() ); // Ensure ring is closed
if ( ringIsClosed || ring2EndsWithS )
ring2.append( ring2.front() ); // Ensure ring is closed
if ( ring1.size() < 3 + ( ringIsClosed || ring1EndsWithS ) || ring2.size() < 3 + ( ringIsClosed || ring2EndsWithS ) )
{
error->setFixFailed( tr( "Resulting geometry is degenerate" ) );
return;
}
QgsLineString *ringGeom1 = new QgsLineString();
ringGeom1->setPoints( ring1 );
QgsLineString *ringGeom2 = new QgsLineString();
ringGeom2->setPoints( ring2 );
QgsAbstractGeometry *part = QgsGeometryCheckerUtils::getGeomPart( geom, vidx.part );
// If is a polygon...
if ( dynamic_cast<QgsCurvePolygon *>( part ) )
{
QgsCurvePolygon *poly = static_cast<QgsCurvePolygon *>( part );
// If self-intersecting ring is an interior ring, create separate holes
if ( vidx.ring > 0 )
{
poly->removeInteriorRing( vidx.ring );
poly->addInteriorRing( ringGeom1 );
poly->addInteriorRing( ringGeom2 );
changes[error->layerId()][feature.id()].append( Change( ChangeRing, ChangeRemoved, vidx ) );
changes[error->layerId()][feature.id()].append( Change( ChangeRing, ChangeAdded, QgsVertexId( vidx.part, poly->ringCount() - 2 ) ) );
changes[error->layerId()][feature.id()].append( Change( ChangeRing, ChangeAdded, QgsVertexId( vidx.part, poly->ringCount() - 1 ) ) );
feature.setGeometry( featureGeom );
featurePool->updateFeature( feature );
}
else
{
// If ring is exterior, build two polygons, and reassign interiors as necessary
poly->setExteriorRing( ringGeom1 );
// If original feature was a linear polygon, also create the new part as a linear polygon
QgsCurvePolygon *poly2 = dynamic_cast<QgsPolygon *>( part ) ? new QgsPolygon() : new QgsCurvePolygon();
poly2->setExteriorRing( ringGeom2 );
// Reassing interiors as necessary
std::unique_ptr< QgsGeometryEngine > geomEnginePoly1 = QgsGeometryCheckerUtils::createGeomEngine( poly, mContext->tolerance );
std::unique_ptr< QgsGeometryEngine > geomEnginePoly2 = QgsGeometryCheckerUtils::createGeomEngine( poly2, mContext->tolerance );
for ( int n = poly->numInteriorRings(), i = n - 1; i >= 0; --i )
{
if ( !geomEnginePoly1->contains( poly->interiorRing( i ) ) )
{
if ( geomEnginePoly2->contains( poly->interiorRing( i ) ) )
{
poly2->addInteriorRing( static_cast<QgsCurve *>( poly->interiorRing( i )->clone() ) );
// No point in adding ChangeAdded changes, since the entire poly2 is added anyways later on
}
poly->removeInteriorRing( i );
changes[error->layerId()][feature.id()].append( Change( ChangeRing, ChangeRemoved, QgsVertexId( vidx.part, 1 + i ) ) );
}
}
if ( method == ToMultiObject )
{
// If is already a geometry collection, just add the new polygon.
if ( dynamic_cast<QgsGeometryCollection *>( geom ) )
{
static_cast<QgsGeometryCollection *>( geom )->addGeometry( poly2 );
changes[error->layerId()][feature.id()].append( Change( ChangeRing, ChangeChanged, QgsVertexId( vidx.part, vidx.ring ) ) );
changes[error->layerId()][feature.id()].append( Change( ChangePart, ChangeAdded, QgsVertexId( geom->partCount() - 1 ) ) );
feature.setGeometry( featureGeom );
featurePool->updateFeature( feature );
}
// Otherwise, create multipolygon
else
{
QgsMultiPolygon *multiPoly = new QgsMultiPolygon();
multiPoly->addGeometry( poly->clone() );
multiPoly->addGeometry( poly2 );
feature.setGeometry( QgsGeometry( multiPoly ) );
featurePool->updateFeature( feature );
changes[error->layerId()][feature.id()].append( Change( ChangeFeature, ChangeChanged ) );
}
}
else // if ( method == ToSingleObjects )
{
QgsFeature newFeature;
newFeature.setAttributes( feature.attributes() );
newFeature.setGeometry( QgsGeometry( poly2 ) );
feature.setGeometry( featureGeom );
featurePool->updateFeature( feature );
featurePool->addFeature( newFeature );
changes[error->layerId()][feature.id()].append( Change( ChangeRing, ChangeChanged, QgsVertexId( vidx.part, vidx.ring ) ) );
changes[error->layerId()][newFeature.id()].append( Change( ChangeFeature, ChangeAdded ) );
}
}
}
else if ( dynamic_cast<QgsCurve *>( part ) )
{
if ( method == ToMultiObject )
{
if ( dynamic_cast<QgsGeometryCollection *>( geom ) )
{
QgsGeometryCollection *geomCollection = static_cast<QgsGeometryCollection *>( geom );
geomCollection->removeGeometry( vidx.part );
geomCollection->addGeometry( ringGeom1 );
geomCollection->addGeometry( ringGeom2 );
feature.setGeometry( featureGeom );
featurePool->updateFeature( feature );
changes[error->layerId()][feature.id()].append( Change( ChangePart, ChangeRemoved, QgsVertexId( vidx.part ) ) );
changes[error->layerId()][feature.id()].append( Change( ChangePart, ChangeAdded, QgsVertexId( geomCollection->partCount() - 2 ) ) );
changes[error->layerId()][feature.id()].append( Change( ChangePart, ChangeAdded, QgsVertexId( geomCollection->partCount() - 1 ) ) );
}
else
{
QgsMultiCurve *geomCollection = new QgsMultiLineString();
geomCollection->addGeometry( ringGeom1 );
geomCollection->addGeometry( ringGeom2 );
feature.setGeometry( QgsGeometry( geomCollection ) );
featurePool->updateFeature( feature );
changes[error->layerId()][feature.id()].append( Change( ChangeFeature, ChangeChanged ) );
}
}
else // if(method == ToSingleObjects)
{
if ( dynamic_cast<QgsGeometryCollection *>( geom ) )
{
QgsGeometryCollection *geomCollection = static_cast<QgsGeometryCollection *>( geom );
geomCollection->removeGeometry( vidx.part );
geomCollection->addGeometry( ringGeom1 );
feature.setGeometry( featureGeom );
featurePool->updateFeature( feature );
changes[error->layerId()][feature.id()].append( Change( ChangePart, ChangeRemoved, QgsVertexId( vidx.part ) ) );
changes[error->layerId()][feature.id()].append( Change( ChangePart, ChangeAdded, QgsVertexId( geomCollection->partCount() - 1 ) ) );
}
else
{
feature.setGeometry( QgsGeometry( ringGeom1 ) );
featurePool->updateFeature( feature );
changes[error->layerId()][feature.id()].append( Change( ChangeFeature, ChangeChanged, QgsVertexId( vidx.part ) ) );
}
QgsFeature newFeature;
newFeature.setAttributes( feature.attributes() );
newFeature.setGeometry( QgsGeometry( ringGeom2 ) );
featurePool->addFeature( newFeature );
changes[error->layerId()][newFeature.id()].append( Change( ChangeFeature, ChangeAdded ) );
}
}
else
{
delete ringGeom1;
delete ringGeom2;
}
error->setFixed( method );
}
else
{
error->setFixFailed( tr( "Unknown method" ) );
}
}
