void QgsMapToolAddFeature::digitized( QgsFeature &f )
{
QgsVectorLayer *vlayer = currentVectorLayer();
bool res = addFeature( vlayer, &f, false );
if ( res && ( mode() == CaptureLine || mode() == CapturePolygon ) )
{
//add points to other features to keep topology up-to-date
bool topologicalEditing = QgsProject::instance()->topologicalEditing();
//use always topological editing for avoidIntersection.
//Otherwise, no way to guarantee the geometries don't have a small gap in between.
QList<QgsVectorLayer *> intersectionLayers = QgsProject::instance()->avoidIntersectionsLayers();
bool avoidIntersection = !intersectionLayers.isEmpty();
if ( avoidIntersection ) //try to add topological points also to background layers
{
const auto constIntersectionLayers = intersectionLayers;
for ( QgsVectorLayer *vl : constIntersectionLayers )
{
//can only add topological points if background layer is editable...
if ( vl->geometryType() == QgsWkbTypes::PolygonGeometry && vl->isEditable() )
{
vl->addTopologicalPoints( f.geometry() );
}
}
}
else if ( topologicalEditing )
{
vlayer->addTopologicalPoints( f.geometry() );
}
}
}
int QgsMapToolEdit::addTopologicalPoints( const QList<QgsPoint>& geom )
{
if ( !mCanvas )
{
return 1;
}
//find out current vector layer
QgsVectorLayer *vlayer = currentVectorLayer();
if ( !vlayer )
{
return 2;
}
QList<QgsPoint>::const_iterator list_it = geom.constBegin();
for ( ; list_it != geom.constEnd(); ++list_it )
{
vlayer->addTopologicalPoints( *list_it );
}
return 0;
}
void QgsMapToolAddFeature::canvasReleaseEvent( QMouseEvent * e )
{
QgsDebugMsg( "entered." );
QgsVectorLayer *vlayer = qobject_cast<QgsVectorLayer *>( mCanvas->currentLayer() );
if ( !vlayer )
{
notifyNotVectorLayer();
return;
}
QGis::WkbType layerWKBType = vlayer->wkbType();
QgsVectorDataProvider* provider = vlayer->dataProvider();
if ( !( provider->capabilities() & QgsVectorDataProvider::AddFeatures ) )
{
QMessageBox::information( 0, tr( "Layer cannot be added to" ),
tr( "The data provider for this layer does not support the addition of features." ) );
return;
}
if ( !vlayer->isEditable() )
{
notifyNotEditableLayer();
return;
}
// POINT CAPTURING
if ( mode() == CapturePoint )
{
//check we only use this tool for point/multipoint layers
if ( vlayer->geometryType() != QGis::Point )
{
QMessageBox::information( 0, tr( "Wrong editing tool" ),
tr( "Cannot apply the 'capture point' tool on this vector layer" ) );
return;
}
QgsPoint idPoint; //point in map coordinates
QList<QgsSnappingResult> snapResults;
QgsPoint savePoint; //point in layer coordinates
if ( mSnapper.snapToBackgroundLayers( e->pos(), snapResults ) == 0 )
{
idPoint = snapPointFromResults( snapResults, e->pos() );
try
{
savePoint = toLayerCoordinates( vlayer, idPoint );
QgsDebugMsg( "savePoint = " + savePoint.toString() );
}
catch ( QgsCsException &cse )
{
Q_UNUSED( cse );
QMessageBox::information( 0, tr( "Coordinate transform error" ),
tr( "Cannot transform the point to the layers coordinate system" ) );
return;
}
}
//only do the rest for provider with feature addition support
//note that for the grass provider, this will return false since
//grass provider has its own mechanism of feature addition
if ( provider->capabilities() & QgsVectorDataProvider::AddFeatures )
{
QgsFeature* f = new QgsFeature( 0, "WKBPoint" );
QgsGeometry *g = 0;
if ( layerWKBType == QGis::WKBPoint || layerWKBType == QGis::WKBPoint25D )
{
g = QgsGeometry::fromPoint( savePoint );
}
else if ( layerWKBType == QGis::WKBMultiPoint || layerWKBType == QGis::WKBMultiPoint25D )
{
g = QgsGeometry::fromMultiPoint( QgsMultiPoint() << savePoint );
}
f->setGeometry( g );
vlayer->beginEditCommand( tr( "Feature added" ) );
if ( addFeature( vlayer, f ) )
{
vlayer->endEditCommand();
}
else
{
delete f;
vlayer->destroyEditCommand();
}
mCanvas->refresh();
}
}
else if ( mode() == CaptureLine || mode() == CapturePolygon )
{
//check we only use the line tool for line/multiline layers
if ( mode() == CaptureLine && vlayer->geometryType() != QGis::Line )
{
QMessageBox::information( 0, tr( "Wrong editing tool" ),
tr( "Cannot apply the 'capture line' tool on this vector layer" ) );
return;
}
//check we only use the polygon tool for polygon/multipolygon layers
if ( mode() == CapturePolygon && vlayer->geometryType() != QGis::Polygon )
{
QMessageBox::information( 0, tr( "Wrong editing tool" ),
tr( "Cannot apply the 'capture polygon' tool on this vector layer" ) );
return;
}
//add point to list and to rubber band
int error = addVertex( e->pos() );
if ( error == 1 )
{
//current layer is not a vector layer
return;
}
else if ( error == 2 )
{
//problem with coordinate transformation
QMessageBox::information( 0, tr( "Coordinate transform error" ),
tr( "Cannot transform the point to the layers coordinate system" ) );
return;
}
if ( e->button() == Qt::LeftButton )
{
startCapturing();
}
else if ( e->button() == Qt::RightButton )
{
// End of string
//lines: bail out if there are not at least two vertices
if ( mode() == CaptureLine && size() < 2 )
{
stopCapturing();
return;
}
//polygons: bail out if there are not at least two vertices
if ( mode() == CapturePolygon && size() < 3 )
{
stopCapturing();
return;
}
//create QgsFeature with wkb representation
QgsFeature* f = new QgsFeature( 0, "WKBLineString" );
QgsGeometry *g;
if ( mode() == CaptureLine )
{
if ( layerWKBType == QGis::WKBLineString || layerWKBType == QGis::WKBLineString25D )
{
g = QgsGeometry::fromPolyline( points().toVector() );
}
else if ( layerWKBType == QGis::WKBMultiLineString || layerWKBType == QGis::WKBMultiLineString25D )
{
g = QgsGeometry::fromMultiPolyline( QgsMultiPolyline() << points().toVector() );
}
else
{
QMessageBox::critical( 0, tr( "Error" ), tr( "Cannot add feature. Unknown WKB type" ) );
stopCapturing();
return; //unknown wkbtype
}
f->setGeometry( g );
}
else // polygon
{
if ( layerWKBType == QGis::WKBPolygon || layerWKBType == QGis::WKBPolygon25D )
{
g = QgsGeometry::fromPolygon( QgsPolygon() << points().toVector() );
}
else if ( layerWKBType == QGis::WKBMultiPolygon || layerWKBType == QGis::WKBMultiPolygon25D )
{
g = QgsGeometry::fromMultiPolygon( QgsMultiPolygon() << ( QgsPolygon() << points().toVector() ) );
}
else
{
QMessageBox::critical( 0, tr( "Error" ), tr( "Cannot add feature. Unknown WKB type" ) );
stopCapturing();
return; //unknown wkbtype
}
if ( !g )
{
stopCapturing();
delete f;
return; // invalid geometry; one possibility is from duplicate points
}
f->setGeometry( g );
int avoidIntersectionsReturn = f->geometry()->avoidIntersections();
if ( avoidIntersectionsReturn == 1 )
{
//not a polygon type. Impossible to get there
}
#if 0
else if ( avoidIntersectionsReturn == 2 ) //MH120131: disable this error message until there is a better way to cope with the single type / multi type problem
{
//bail out...
QMessageBox::critical( 0, tr( "Error" ), tr( "The feature could not be added because removing the polygon intersections would change the geometry type" ) );
delete f;
stopCapturing();
return;
}
#endif
else if ( avoidIntersectionsReturn == 3 )
{
QMessageBox::critical( 0, tr( "Error" ), tr( "An error was reported during intersection removal" ) );
}
}
vlayer->beginEditCommand( tr( "Feature added" ) );
if ( addFeature( vlayer, f ) )
{
//add points to other features to keep topology up-to-date
int topologicalEditing = QgsProject::instance()->readNumEntry( "Digitizing", "/TopologicalEditing", 0 );
if ( topologicalEditing )
{
vlayer->addTopologicalPoints( f->geometry() );
}
vlayer->endEditCommand();
}
else
{
delete f;
vlayer->destroyEditCommand();
}
stopCapturing();
}
}
}
void QgsMapToolAddFeature::cadCanvasReleaseEvent( QgsMapMouseEvent* e )
{
QgsVectorLayer* vlayer = currentVectorLayer();
if ( !vlayer )
{
notifyNotVectorLayer();
return;
}
QGis::WkbType layerWKBType = vlayer->wkbType();
QgsVectorDataProvider* provider = vlayer->dataProvider();
if ( !( provider->capabilities() & QgsVectorDataProvider::AddFeatures ) )
{
emit messageEmitted( tr( "The data provider for this layer does not support the addition of features." ), QgsMessageBar::WARNING );
return;
}
if ( !vlayer->isEditable() )
{
notifyNotEditableLayer();
return;
}
// POINT CAPTURING
if ( mode() == CapturePoint )
{
if ( e->button() != Qt::LeftButton )
return;
//check we only use this tool for point/multipoint layers
if ( vlayer->geometryType() != QGis::Point && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture point' tool on this vector layer" ), QgsMessageBar::WARNING );
return;
}
QgsPoint savePoint; //point in layer coordinates
try
{
savePoint = toLayerCoordinates( vlayer, e->mapPoint() );
QgsDebugMsg( "savePoint = " + savePoint.toString() );
}
catch ( QgsCsException &cse )
{
Q_UNUSED( cse );
emit messageEmitted( tr( "Cannot transform the point to the layers coordinate system" ), QgsMessageBar::WARNING );
return;
}
//only do the rest for provider with feature addition support
//note that for the grass provider, this will return false since
//grass provider has its own mechanism of feature addition
if ( provider->capabilities() & QgsVectorDataProvider::AddFeatures )
{
QgsFeature f( vlayer->fields(), 0 );
QgsGeometry *g = 0;
if ( layerWKBType == QGis::WKBPoint || layerWKBType == QGis::WKBPoint25D )
{
g = QgsGeometry::fromPoint( savePoint );
}
else if ( layerWKBType == QGis::WKBMultiPoint || layerWKBType == QGis::WKBMultiPoint25D )
{
g = QgsGeometry::fromMultiPoint( QgsMultiPoint() << savePoint );
}
else
{
// if layer supports more types (mCheckGeometryType is false)
g = QgsGeometry::fromPoint( savePoint );
}
f.setGeometry( g );
f.setValid( true );
addFeature( vlayer, &f, false );
mCanvas->refresh();
}
}
// LINE AND POLYGON CAPTURING
else if ( mode() == CaptureLine || mode() == CapturePolygon )
{
//check we only use the line tool for line/multiline layers
if ( mode() == CaptureLine && vlayer->geometryType() != QGis::Line && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture line' tool on this vector layer" ), QgsMessageBar::WARNING );
return;
}
//check we only use the polygon tool for polygon/multipolygon layers
if ( mode() == CapturePolygon && vlayer->geometryType() != QGis::Polygon && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture polygon' tool on this vector layer" ), QgsMessageBar::WARNING );
return;
}
//add point to list and to rubber band
if ( e->button() == Qt::LeftButton )
{
int error = addVertex( e->mapPoint() );
if ( error == 1 )
{
//current layer is not a vector layer
return;
}
else if ( error == 2 )
{
//problem with coordinate transformation
emit messageEmitted( tr( "Cannot transform the point to the layers coordinate system" ), QgsMessageBar::WARNING );
return;
}
startCapturing();
}
else if ( e->button() == Qt::RightButton )
{
// End of string
deleteTempRubberBand();
//lines: bail out if there are not at least two vertices
if ( mode() == CaptureLine && size() < 2 )
{
stopCapturing();
return;
}
//polygons: bail out if there are not at least two vertices
if ( mode() == CapturePolygon && size() < 3 )
{
stopCapturing();
return;
}
if ( mode() == CapturePolygon )
{
closePolygon();
}
//create QgsFeature with wkb representation
QScopedPointer< QgsFeature > f( new QgsFeature( vlayer->fields(), 0 ) );
//does compoundcurve contain circular strings?
//does provider support circular strings?
bool hasCurvedSegments = captureCurve()->hasCurvedSegments();
bool providerSupportsCurvedSegments = vlayer->dataProvider()->capabilities() & QgsVectorDataProvider::CircularGeometries;
QgsCurveV2* curveToAdd = 0;
if ( hasCurvedSegments && providerSupportsCurvedSegments )
{
curveToAdd = captureCurve()->clone();
}
else
{
curveToAdd = captureCurve()->curveToLine();
}
if ( mode() == CaptureLine )
{
f->setGeometry( new QgsGeometry( curveToAdd ) );
}
else
{
QgsCurvePolygonV2* poly = 0;
if ( hasCurvedSegments && providerSupportsCurvedSegments )
{
poly = new QgsCurvePolygonV2();
}
else
{
poly = new QgsPolygonV2();
}
poly->setExteriorRing( curveToAdd );
f->setGeometry( new QgsGeometry( poly ) );
int avoidIntersectionsReturn = f->geometry()->avoidIntersections();
if ( avoidIntersectionsReturn == 1 )
{
//not a polygon type. Impossible to get there
}
#if 0
else if ( avoidIntersectionsReturn == 2 ) //MH120131: disable this error message until there is a better way to cope with the single type / multi type problem
{
//bail out...
emit messageEmitted( tr( "The feature could not be added because removing the polygon intersections would change the geometry type" ), QgsMessageBar::CRITICAL );
stopCapturing();
return;
}
#endif
else if ( avoidIntersectionsReturn == 3 )
{
emit messageEmitted( tr( "An error was reported during intersection removal" ), QgsMessageBar::CRITICAL );
}
if ( !f->constGeometry()->asWkb() ) //avoid intersection might have removed the whole geometry
{
QString reason;
if ( avoidIntersectionsReturn != 2 )
{
reason = tr( "The feature cannot be added because it's geometry is empty" );
}
else
{
reason = tr( "The feature cannot be added because it's geometry collapsed due to intersection avoidance" );
}
emit messageEmitted( reason, QgsMessageBar::CRITICAL );
stopCapturing();
return;
}
}
if ( addFeature( vlayer, f.data(), false ) )
{
//add points to other features to keep topology up-to-date
int topologicalEditing = QgsProject::instance()->readNumEntry( "Digitizing", "/TopologicalEditing", 0 );
//use always topological editing for avoidIntersection.
//Otherwise, no way to guarantee the geometries don't have a small gap in between.
QStringList intersectionLayers = QgsProject::instance()->readListEntry( "Digitizing", "/AvoidIntersectionsList" );
bool avoidIntersection = !intersectionLayers.isEmpty();
if ( avoidIntersection ) //try to add topological points also to background layers
{
QStringList::const_iterator lIt = intersectionLayers.constBegin();
for ( ; lIt != intersectionLayers.constEnd(); ++lIt )
{
QgsMapLayer* ml = QgsMapLayerRegistry::instance()->mapLayer( *lIt );
QgsVectorLayer* vl = qobject_cast<QgsVectorLayer*>( ml );
//can only add topological points if background layer is editable...
if ( vl && vl->geometryType() == QGis::Polygon && vl->isEditable() )
{
vl->addTopologicalPoints( f->constGeometry() );
}
}
}
else if ( topologicalEditing )
{
vlayer->addTopologicalPoints( f->constGeometry() );
}
}
stopCapturing();
}
}
}