void SCH_EDIT_FRAME::OnSelectUnit( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
wxCHECK_RET( item != NULL && item->Type() == SCH_COMPONENT_T,
wxT( "Cannot select unit of invalid schematic item." ) );
INSTALL_UNBUFFERED_DC( dc, m_canvas );
m_canvas->MoveCursorToCrossHair();
SCH_COMPONENT* component = (SCH_COMPONENT*) item;
int unit = aEvent.GetId() + 1 - ID_POPUP_SCH_SELECT_UNIT1;
LIB_PART* part = GetLibPart( component->GetLibId() );
if( !part )
return;
int unitCount = part->GetUnitCount();
wxCHECK_RET( (unit >= 1) && (unit <= unitCount),
wxString::Format( wxT( "Cannot select unit %d from component " ), unit ) +
part->GetName() );
if( unitCount <= 1 || component->GetUnit() == unit )
return;
if( unit > unitCount )
unit = unitCount;
STATUS_FLAGS flags = component->GetFlags();
if( !flags ) // No command in progress: save in undo list
SaveCopyInUndoList( component, UR_CHANGED );
if( flags )
component->Draw( m_canvas, &dc, wxPoint( 0, 0 ), g_XorMode, g_GhostColor );
else
component->Draw( m_canvas, &dc, wxPoint( 0, 0 ), g_XorMode );
/* Update the unit number. */
component->SetUnitSelection( m_CurrentSheet, unit );
component->SetUnit( unit );
component->ClearFlags();
component->SetFlags( flags ); // Restore m_Flag modified by SetUnit()
if( m_autoplaceFields )
component->AutoAutoplaceFields( GetScreen() );
if( screen->TestDanglingEnds() )
m_canvas->Refresh();
OnModify();
}
void SCH_EDIT_FRAME::DisplayCurrentSheet()
{
SetRepeatItem( NULL );
ClearMsgPanel();
SCH_SCREEN* screen = m_CurrentSheet->LastScreen();
// Switch to current sheet,
// and update the grid size, because it can be modified in latest screen
SetScreen( screen );
GetScreen()->SetGrid( m_LastGridSizeId + ID_POPUP_GRID_LEVEL_1000 );
// update the References
m_CurrentSheet->UpdateAllScreenReferences();
SetSheetNumberAndCount();
m_canvas->SetCanStartBlock( -1 );
if( screen->m_FirstRedraw )
{
Zoom_Automatique( false );
screen->m_FirstRedraw = false;
SetCrossHairPosition( GetScrollCenterPosition() );
m_canvas->MoveCursorToCrossHair();
// Ensure the schematic is fully segmented on first display
BreakSegmentsOnJunctions();
SchematicCleanUp( true );
screen->ClearUndoORRedoList( screen->m_UndoList, 1 );
screen->TestDanglingEnds();
}
else
{
RedrawScreen( GetScrollCenterPosition(), true );
}
// Some items (wires, labels) can be highlighted. So prepare the highlight flag:
SetCurrentSheetHighlightFlags();
// Now refresh m_canvas. Should be not necessary, but because screen has changed
// the previous refresh has set all new draw parameters (scroll position ..)
// but most of time there were some inconsitencies about cursor parameters
// ( previous position of cursor ...) and artefacts can happen
// mainly when sheet size has changed
// This second refresh clears artefacts because at this point,
// all parameters are now updated
m_canvas->Refresh();
}
bool SCH_EDIT_FRAME::DeleteItemAtCrossHair( wxDC* DC )
{
SCH_ITEM* item;
SCH_SCREEN* screen = GetScreen();
item = LocateItem( GetCrossHairPosition(), SCH_COLLECTOR::ParentItems );
if( item )
{
bool itemHasConnections = item->IsConnectable();
screen->SetCurItem( NULL );
SetRepeatItem( NULL );
DeleteItem( item );
if( itemHasConnections )
screen->TestDanglingEnds( m_canvas, DC );
OnModify();
return true;
}
return false;
}
void SCH_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
wxPoint pos;
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
pos = wxGetMousePosition();
pos.y += 20;
// If needed, stop the current command and deselect current tool
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_POPUP_CANCEL_CURRENT_COMMAND:
case ID_POPUP_SCH_ENTRY_SELECT_SLASH:
case ID_POPUP_SCH_ENTRY_SELECT_ANTISLASH:
case ID_POPUP_SCH_BEGIN_WIRE:
case ID_POPUP_SCH_BEGIN_BUS:
case ID_POPUP_END_LINE:
case ID_POPUP_SCH_SET_SHAPE_TEXT:
case ID_POPUP_SCH_CLEANUP_SHEET:
case ID_POPUP_SCH_END_SHEET:
case ID_POPUP_SCH_RESIZE_SHEET:
case ID_POPUP_IMPORT_GLABEL:
case ID_POPUP_SCH_INIT_CMP:
case ID_POPUP_SCH_DISPLAYDOC_CMP:
case ID_POPUP_SCH_EDIT_CONVERT_CMP:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_DRAG_BLOCK:
case ID_POPUP_COPY_BLOCK:
case ID_POPUP_SCH_DELETE_NODE:
case ID_POPUP_SCH_DELETE_CONNECTION:
case ID_POPUP_SCH_ENTER_SHEET:
case ID_POPUP_SCH_LEAVE_SHEET:
case ID_POPUP_SCH_ADD_JUNCTION:
case ID_POPUP_SCH_ADD_LABEL:
case ID_POPUP_SCH_GETINFO_MARKER:
/* At this point: Do nothing. these commands do not need to stop the
* current command (mainly a block command) or reset the current state
* They will be executed later, in next switch structure.
*/
break;
case ID_POPUP_SCH_DELETE_CMP:
case ID_POPUP_SCH_DELETE:
// Stop the current command (if any) but keep the current tool
m_canvas->EndMouseCapture();
break;
default:
// Stop the current command and deselect the current tool
m_canvas->EndMouseCapture( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor() );
break;
}
INSTALL_UNBUFFERED_DC( dc, m_canvas );
item = screen->GetCurItem(); // Can be modified by previous calls.
switch( id )
{
case ID_HIERARCHY:
InstallHierarchyFrame( &dc, pos );
SetRepeatItem( NULL );
break;
case wxID_CUT:
if( screen->m_BlockLocate.GetCommand() != BLOCK_MOVE )
break;
screen->m_BlockLocate.SetCommand( BLOCK_DELETE );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
SetRepeatItem( NULL );
SetSheetNumberAndCount();
break;
case wxID_PASTE:
HandleBlockBegin( &dc, BLOCK_PASTE, GetCrossHairPosition() );
break;
case ID_POPUP_SCH_ENTRY_SELECT_SLASH:
m_canvas->MoveCursorToCrossHair();
SetBusEntryShape( &dc, dynamic_cast<SCH_BUS_ENTRY_BASE*>( item ), '/' );
break;
case ID_POPUP_SCH_ENTRY_SELECT_ANTISLASH:
m_canvas->MoveCursorToCrossHair();
SetBusEntryShape( &dc, dynamic_cast<SCH_BUS_ENTRY_BASE*>( item ), '\\' );
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
if( m_canvas->IsMouseCaptured() )
{
m_canvas->EndMouseCapture();
SetToolID( GetToolId(), m_canvas->GetCurrentCursor(), wxEmptyString );
}
else
{
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
}
break;
case ID_POPUP_END_LINE:
m_canvas->MoveCursorToCrossHair();
EndSegment( &dc );
break;
case ID_POPUP_SCH_BEGIN_WIRE:
m_canvas->MoveCursorToCrossHair();
OnLeftClick( &dc, GetCrossHairPosition() );
break;
case ID_POPUP_SCH_BEGIN_BUS:
m_canvas->MoveCursorToCrossHair();
OnLeftClick( &dc, GetCrossHairPosition() );
break;
case ID_POPUP_SCH_SET_SHAPE_TEXT:
// Not used
break;
case ID_POPUP_SCH_DELETE_NODE:
case ID_POPUP_SCH_DELETE_CONNECTION:
m_canvas->MoveCursorToCrossHair();
DeleteConnection( id == ID_POPUP_SCH_DELETE_CONNECTION );
screen->SetCurItem( NULL );
SetRepeatItem( NULL );
screen->TestDanglingEnds( m_canvas, &dc );
m_canvas->Refresh();
break;
case ID_POPUP_SCH_BREAK_WIRE:
{
DLIST< SCH_ITEM > oldWires;
oldWires.SetOwnership( false ); // Prevent DLIST for deleting items in destructor.
m_canvas->MoveCursorToCrossHair();
screen->ExtractWires( oldWires, true );
screen->BreakSegment( GetCrossHairPosition() );
if( oldWires.GetCount() != 0 )
{
PICKED_ITEMS_LIST oldItems;
oldItems.m_Status = UR_WIRE_IMAGE;
while( oldWires.GetCount() != 0 )
{
ITEM_PICKER picker = ITEM_PICKER( oldWires.PopFront(), UR_WIRE_IMAGE );
oldItems.PushItem( picker );
}
SaveCopyInUndoList( oldItems, UR_WIRE_IMAGE );
}
screen->TestDanglingEnds( m_canvas, &dc );
}
break;
case ID_POPUP_SCH_DELETE_CMP:
case ID_POPUP_SCH_DELETE:
if( item == NULL )
break;
DeleteItem( item );
screen->SetCurItem( NULL );
SetRepeatItem( NULL );
screen->TestDanglingEnds( m_canvas, &dc );
SetSheetNumberAndCount();
OnModify();
break;
case ID_POPUP_SCH_END_SHEET:
m_canvas->MoveCursorToCrossHair();
addCurrentItemToList( &dc );
break;
case ID_POPUP_SCH_RESIZE_SHEET:
ReSizeSheet( (SCH_SHEET*) item, &dc );
screen->TestDanglingEnds( m_canvas, &dc );
break;
case ID_POPUP_IMPORT_GLABEL:
if( item != NULL && item->Type() == SCH_SHEET_T )
screen->SetCurItem( ImportSheetPin( (SCH_SHEET*) item, &dc ) );
break;
case ID_POPUP_SCH_CLEANUP_SHEET:
if( item != NULL && item->Type() == SCH_SHEET_T )
{
SCH_SHEET* sheet = (SCH_SHEET*) item;
if( !sheet->HasUndefinedPins() )
{
DisplayInfoMessage( this,
_( "There are no undefined labels in this sheet to clean up." ) );
return;
}
if( !IsOK( this, _( "Do you wish to cleanup this sheet?" ) ) )
return;
/* Save sheet in undo list before cleaning up unreferenced hierarchical labels. */
SaveCopyInUndoList( sheet, UR_CHANGED );
sheet->CleanupSheet();
OnModify();
m_canvas->RefreshDrawingRect( sheet->GetBoundingBox() );
}
break;
case ID_POPUP_SCH_INIT_CMP:
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_SCH_EDIT_CONVERT_CMP:
// Ensure the struct is a component (could be a struct of a component, like Field, text..)
if( item && item->Type() == SCH_COMPONENT_T )
{
m_canvas->MoveCursorToCrossHair();
ConvertPart( (SCH_COMPONENT*) item, &dc );
}
break;
case ID_POPUP_SCH_DISPLAYDOC_CMP:
// Ensure the struct is a component (could be a piece of a component, like Field, text..)
if( item && item->Type() == SCH_COMPONENT_T )
{
LIB_ALIAS* LibEntry;
LibEntry = CMP_LIBRARY::FindLibraryEntry( ( (SCH_COMPONENT*) item )->GetLibName() );
if( LibEntry && LibEntry->GetDocFileName() != wxEmptyString )
{
GetAssociatedDocument( this, LibEntry->GetDocFileName(),
&wxGetApp().GetLibraryPathList() );
}
}
break;
case ID_POPUP_SCH_ENTER_SHEET:
if( item && (item->Type() == SCH_SHEET_T) )
{
m_CurrentSheet->Push( (SCH_SHEET*) item );
DisplayCurrentSheet();
}
break;
case ID_POPUP_SCH_LEAVE_SHEET:
m_CurrentSheet->Pop();
DisplayCurrentSheet();
break;
case wxID_COPY: // really this is a Save block for paste
screen->m_BlockLocate.SetCommand( BLOCK_SAVE );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_PLACE_BLOCK:
m_canvas->SetAutoPanRequest( false );
m_canvas->MoveCursorToCrossHair();
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
screen->m_BlockLocate.SetCommand( BLOCK_ZOOM );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetCommand( BLOCK_DELETE );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
SetSheetNumberAndCount();
break;
case ID_POPUP_COPY_BLOCK:
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetCommand( BLOCK_COPY );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DRAG_BLOCK:
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetCommand( BLOCK_DRAG );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_SCH_ADD_JUNCTION:
m_canvas->MoveCursorToCrossHair();
screen->SetCurItem( AddJunction( &dc, GetCrossHairPosition(), true ) );
screen->TestDanglingEnds( m_canvas, &dc );
screen->SetCurItem( NULL );
break;
case ID_POPUP_SCH_ADD_LABEL:
case ID_POPUP_SCH_ADD_GLABEL:
screen->SetCurItem( CreateNewText( &dc, id == ID_POPUP_SCH_ADD_LABEL ?
LAYER_LOCLABEL : LAYER_GLOBLABEL ) );
item = screen->GetCurItem();
if( item )
addCurrentItemToList( &dc );
break;
case ID_POPUP_SCH_GETINFO_MARKER:
if( item && item->Type() == SCH_MARKER_T )
( (SCH_MARKER*) item )->DisplayMarkerInfo( this );
break;
default: // Log error:
wxFAIL_MSG( wxString::Format( wxT( "Cannot process command event ID %d" ),
event.GetId() ) );
break;
}
// End switch ( id ) (Command execution)
if( GetToolId() == ID_NO_TOOL_SELECTED )
SetRepeatItem( NULL );
}
void SCH_SCREENS::TestDanglingEnds()
{
for( SCH_SCREEN* screen = GetFirst(); screen; screen = GetNext() )
screen->TestDanglingEnds();
}
void SCH_EDIT_FRAME::addCurrentItemToList( wxDC* aDC )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
wxCHECK_RET( item != NULL, wxT( "Cannot add current item to list." ) );
m_canvas->SetAutoPanRequest( false );
SCH_ITEM* undoItem = item;
if( item->Type() == SCH_SHEET_PIN_T )
{
SCH_SHEET* sheet = (SCH_SHEET*) item->GetParent();
wxCHECK_RET( (sheet != NULL) && (sheet->Type() == SCH_SHEET_T),
wxT( "Cannot place sheet pin in invalid schematic sheet object." ) );
undoItem = sheet;
}
else if( item->Type() == SCH_FIELD_T )
{
SCH_COMPONENT* cmp = (SCH_COMPONENT*) item->GetParent();
wxCHECK_RET( (cmp != NULL) && (cmp->Type() == SCH_COMPONENT_T),
wxT( "Cannot place field in invalid schematic component object." ) );
undoItem = cmp;
}
if( item->IsNew() )
{
if( item->Type() == SCH_SHEET_T )
{
// Fix the size and position of the new sheet using the last values set by
// the m_mouseCaptureCallback function.
m_canvas->SetMouseCapture( NULL, NULL );
if( !EditSheet( (SCH_SHEET*)item, aDC ) )
{
screen->SetCurItem( NULL );
item->Draw( m_canvas, aDC, wxPoint( 0, 0 ), g_XorMode );
delete item;
return;
}
SetSheetNumberAndCount();
}
if( undoItem == item )
{
if( !screen->CheckIfOnDrawList( item ) ) // don't want a loop!
screen->Append( item );
SetRepeatItem( item );
SaveCopyInUndoList( undoItem, UR_NEW );
}
else
{
// Here, item is not a basic schematic item, but an item inside
// a parent basic schematic item,
// currently: sheet pin or component field.
// currently, only a sheet pin can be found as new item,
// because new component fields have a specific handling, and do not appears here
SaveCopyInUndoList( undoItem, UR_CHANGED );
if( item->Type() == SCH_SHEET_PIN_T )
( (SCH_SHEET*)undoItem )->AddPin( (SCH_SHEET_PIN*) item );
else
wxLogMessage(wxT( "addCurrentItemToList: expected type = SCH_SHEET_PIN_T, actual type = %d" ),
item->Type() );
}
}
else
{
SaveUndoItemInUndoList( undoItem );
}
// Erase the wire representation before the 'normal' view is drawn.
if ( item->IsWireImage() )
item->Draw( m_canvas, aDC, wxPoint( 0, 0 ), g_XorMode );
item->ClearFlags();
screen->SetModify();
screen->SetCurItem( NULL );
m_canvas->SetMouseCapture( NULL, NULL );
m_canvas->EndMouseCapture();
if( item->IsConnectable() )
screen->TestDanglingEnds();
if( aDC )
{
EDA_CROSS_HAIR_MANAGER( m_canvas, aDC ); // Erase schematic cursor
undoItem->Draw( m_canvas, aDC, wxPoint( 0, 0 ), GR_DEFAULT_DRAWMODE );
}
}
