// Enumerate and possibly display the animated GIF filenames in GIFS directory
int enumerateGIFFiles(const char *directoryName, boolean displayFilenames) {
numberOfFiles = 0;
// Set the current working directory
if (! sd.chdir(directoryName, true)) {
sd.errorHalt("Could not change to gifs directory");
}
sd.vwd()->rewind();
char fn[13];
while (file.openNext(sd.vwd(), O_READ)) {
file.getName(fn, 13);
// If filename not deleted, count it
if (fn[0] != '_') {
numberOfFiles++;
if (displayFilenames) {
Serial.println(fn);
delay(20);
}
}
file.close();
}
// Set the current working directory
if (! sd.chdir("/", true)) {
sd.errorHalt("Could not change to root directory");
}
return numberOfFiles;
}
// Get the full path/filename of the GIF file with specified index
void getGIFFilenameByIndex(const char *directoryName, int index, char *pnBuffer) {
char filename[13];
// Make sure index is in range
if ((index >= 0) && (index < numberOfFiles)) {
// Set the current working directory
if (! sd.chdir(directoryName, true)) {
sd.errorHalt("Could not change to gifs directory");
}
// Make sure file is closed before starting
file.close();
// Rewind the directory to the beginning
sd.vwd()->rewind();
while ((file.openNext(sd.vwd(), O_READ)) && (index >= 0)) {
file.getName(filename, 13);
// If filename is not marked as deleted, count it
if ((filename[0] != '_') && (filename[0] != '~')) {
index--;
}
file.close();
}
// Set the current working directory back to root
if (! sd.chdir("/", true)) {
sd.errorHalt("Could not change to root directory");
}
// Copy the directory name into the pathname buffer
strcpy(pnBuffer, directoryName);
// Append the filename to the pathname
strcat(pnBuffer, filename);
}
}
uint32_t SD_GetFileSize(void)
{
uint32_t retVal = 0;
//TEST.TXT
sdf.chdir(); // Change directory to root
// OPEN the file for reading:
if (!file.open("TEST.TXT", O_READ)) {
sdf.errorHalt("opening FILE for read failed");
}
else
{
retVal = file.fileSize();
file.close();
}
return retVal;
}
int main()
{
// initialize the SD card at SPI_FULL_SPEED for best performance.
// try SPI_HALF_SPEED if bus errors occur.
if (!sd.begin(SD_ENABLE_PIN, SPI_FULL_SPEED)) sd.initErrorHalt();
if (!myFile.open("test.txt", O_RDWR | O_CREAT | O_AT_END)) {
sd.errorHalt("opening test.txt for write failed");
}
myFile.println("testing 1, 2, 3.");
// close the file:
myFile.close();
while (1);
return 0;
}
boolean MP3Player::Setup_STA013(void)
{
byte buf[2];
if (!myFile.open("sta013.cfg", O_READ))
{
#if DEBUG
sd.errorHalt("cfg file error");
#endif
return false;
}
#if DEBUG
Serial.println("setting STA013 from cfgfile");
#endif
while (myFile.available())
{
buf[0]=byte (myFile.read());
buf[1]=byte (myFile.read());
I2C_Write(buf[0], buf[1]);
// Serial.write(buf[0]);
// Serial.write(buf[1]);
}
while(!myFile.close())
{
#if DEBUG
Serial.println("close cfg file..");
#endif
}
#if DEBUG
Serial.println("Setup STA013 Register Done..");
#endif
return true;
}
boolean MP3Player::Play(const char* SongName)
{
if(!PLAY)
{
k=65;
if(!myFile.isOpen())
{
// open the file for read
if (!myFile.open(SongName, O_READ))
{
#if DEBUG
sd.errorHalt("open audio file failed");
#endif
return false;
}
}
else
name = SongName;
Run_STA013();
delayMicroseconds(500000);
Play_Pause(1);
//AMPON();
#if DEBUG
Serial.println("playing");
#endif
filesize=myFile.fileSize();
Timer1.initialize(30);// 30 us = can check data request and send a byte to STA013 at 1/30u = 33.33kHz
// able to play a song up to 33.33 x 8 /1024 = 260 kbps
// recommend play song at 200kbps or lower (such as 128 kbps)for stable performance
PLAY=true;
Timer1.attachInterrupt(Callback);
}
return true;
}
int Tune::play(char* trackName)
{
if (isPlaying()) return 1;
// Exit if track not found
if (!track.open(trackName, O_READ))
{
sd.errorHalt("Track not found !");
return 3;
}
playState = playback;
// Reset decode time & bitrate from previous playback
writeSCI(SCI_DECODE_TIME, 0);
delay(100);
skipTag(); // Skip ID3v2 tag if there's one
feed(); // Feed VS1011e
attachInterrupt(0, feed, RISING); // Let the interrupt handle the rest of the process
return 0;
}
void ScriviSd(void)
{
int n;
n = 0;
if (!sd.init(SPI_HALF_SPEED, 10))
{
sd.initErrorHalt();
return;
}
if (!myFile.open("test-1.txt", O_WRITE | O_CREAT | O_APPEND))
{
delay(800);
digitalWrite(7, LOW);
delay(200);
digitalWrite(7, HIGH);
delay(800);
sd.errorHalt("opening test.txt for write failed");
return;
}
// Serial.println(nMin);
// for(n = 0; n < nCount; n++)
// {
// myFile.print("TIME: ");
// myFile.print(nMin);
// myFile.print(" min. - VALUE : ");
// myFile.print(nValue[n]);
myFile.println(" mTesla");
// }
// Serial.println("ScriviSd5");
// nCount = 0;
// nMin++;
myFile.close();
}
boolean SD_ReadFile(const char *filename)
{
uint32_t t_arrival = millis();
boolean retVal = false;
sdf.chdir();
if (!file.open(filename, O_READ)) {
sdf.errorHalt("opening FILE for read failed");
}
else
{
uint32_t len = file.fileSize();
uint8_t index = 0;
for(uint32_t i=0; i< len; i++)
{
int intData = file.read();
char byteData;
int base = 10u;
//itoa(intData,&byteData,base); // Convert to ASCII
buffer[index] = (uint8_t)intData;//byteData;
if(index < 63u) {
index++;
}
else {
usb_rawhid_send(buffer, 100u);
index = 0;
}
}
file.close();
uint32_t t_exit = millis() - t_arrival;
buffer[62] = (uint8_t)((t_exit & 0x000000FF)>>8);
buffer[63] = (uint8_t)t_exit;
usb_rawhid_send(buffer,100u);
}
}