void RenderView::setSelection(RenderObject* start, int startPos, RenderObject* end, int endPos, SelectionPaintInvalidationMode blockPaintInvalidationMode)
{
// This code makes no assumptions as to if the rendering tree is up to date or not
// and will not try to update it. Currently clearSelection calls this
// (intentionally) without updating the rendering tree as it doesn't care.
// Other callers may want to force recalc style before calling this.
// Make sure both our start and end objects are defined.
// Check www.msnbc.com and try clicking around to find the case where this happened.
if ((start && !end) || (end && !start))
return;
// Just return if the selection hasn't changed.
if (m_selectionStart == start && m_selectionStartPos == startPos &&
m_selectionEnd == end && m_selectionEndPos == endPos)
return;
// Record the old selected objects. These will be used later
// when we compare against the new selected objects.
int oldStartPos = m_selectionStartPos;
int oldEndPos = m_selectionEndPos;
// Objects each have a single selection rect to examine.
typedef HashMap<RawPtr<RenderObject>, OwnPtr<RenderSelectionInfo> > SelectedObjectMap;
SelectedObjectMap oldSelectedObjects;
SelectedObjectMap newSelectedObjects;
// Blocks contain selected objects and fill gaps between them, either on the left, right, or in between lines and blocks.
// In order to get the paint invalidation rect right, we have to examine left, middle, and right rects individually, since otherwise
// the union of those rects might remain the same even when changes have occurred.
typedef HashMap<RawPtr<RenderBlock>, OwnPtr<RenderBlockSelectionInfo> > SelectedBlockMap;
SelectedBlockMap oldSelectedBlocks;
SelectedBlockMap newSelectedBlocks;
RenderObject* os = m_selectionStart;
RenderObject* stop = rendererAfterPosition(m_selectionEnd, m_selectionEndPos);
bool exploringBackwards = false;
bool continueExploring = os && (os != stop);
while (continueExploring) {
if ((os->canBeSelectionLeaf() || os == m_selectionStart || os == m_selectionEnd) && os->selectionState() != SelectionNone) {
// Blocks are responsible for painting line gaps and margin gaps. They must be examined as well.
oldSelectedObjects.set(os, adoptPtr(new RenderSelectionInfo(os, true)));
if (blockPaintInvalidationMode == PaintInvalidationNewXOROld) {
RenderBlock* cb = os->containingBlock();
while (cb && !cb->isRenderView()) {
OwnPtr<RenderBlockSelectionInfo>& blockInfo = oldSelectedBlocks.add(cb, nullptr).storedValue->value;
if (blockInfo)
break;
blockInfo = adoptPtr(new RenderBlockSelectionInfo(cb));
cb = cb->containingBlock();
}
}
}
os = getNextOrPrevRenderObjectBasedOnDirection(os, stop, continueExploring, exploringBackwards);
}
// Now clear the selection.
SelectedObjectMap::iterator oldObjectsEnd = oldSelectedObjects.end();
for (SelectedObjectMap::iterator i = oldSelectedObjects.begin(); i != oldObjectsEnd; ++i)
i->key->setSelectionStateIfNeeded(SelectionNone);
// set selection start and end
m_selectionStart = start;
m_selectionStartPos = startPos;
m_selectionEnd = end;
m_selectionEndPos = endPos;
// Update the selection status of all objects between m_selectionStart and m_selectionEnd
if (start && start == end)
start->setSelectionStateIfNeeded(SelectionBoth);
else {
if (start)
start->setSelectionStateIfNeeded(SelectionStart);
if (end)
end->setSelectionStateIfNeeded(SelectionEnd);
}
RenderObject* o = start;
stop = rendererAfterPosition(end, endPos);
while (o && o != stop) {
if (o != start && o != end && o->canBeSelectionLeaf())
o->setSelectionStateIfNeeded(SelectionInside);
o = o->nextInPreOrder();
}
if (blockPaintInvalidationMode != PaintInvalidationNothing)
layer()->clearBlockSelectionGapsBounds();
// Now that the selection state has been updated for the new objects, walk them again and
// put them in the new objects list.
o = start;
exploringBackwards = false;
continueExploring = o && (o != stop);
while (continueExploring) {
if ((o->canBeSelectionLeaf() || o == start || o == end) && o->selectionState() != SelectionNone) {
newSelectedObjects.set(o, adoptPtr(new RenderSelectionInfo(o, true)));
RenderBlock* cb = o->containingBlock();
while (cb && !cb->isRenderView()) {
OwnPtr<RenderBlockSelectionInfo>& blockInfo = newSelectedBlocks.add(cb, nullptr).storedValue->value;
if (blockInfo)
break;
blockInfo = adoptPtr(new RenderBlockSelectionInfo(cb));
cb = cb->containingBlock();
}
}
o = getNextOrPrevRenderObjectBasedOnDirection(o, stop, continueExploring, exploringBackwards);
}
if (!m_frameView || blockPaintInvalidationMode == PaintInvalidationNothing)
return;
// For querying RenderLayer::compositingState()
// FIXME: this is wrong, selection should not cause eager invalidation. crbug.com/407416
DisableCompositingQueryAsserts disabler;
// Have any of the old selected objects changed compared to the new selection?
for (SelectedObjectMap::iterator i = oldSelectedObjects.begin(); i != oldObjectsEnd; ++i) {
RenderObject* obj = i->key;
RenderSelectionInfo* newInfo = newSelectedObjects.get(obj);
RenderSelectionInfo* oldInfo = i->value.get();
if (!newInfo || oldInfo->rect() != newInfo->rect() || oldInfo->state() != newInfo->state() ||
(m_selectionStart == obj && oldStartPos != m_selectionStartPos) ||
(m_selectionEnd == obj && oldEndPos != m_selectionEndPos)) {
oldInfo->invalidatePaint();
if (newInfo) {
newInfo->invalidatePaint();
newSelectedObjects.remove(obj);
}
}
}
// Any new objects that remain were not found in the old objects dict, and so they need to be updated.
SelectedObjectMap::iterator newObjectsEnd = newSelectedObjects.end();
for (SelectedObjectMap::iterator i = newSelectedObjects.begin(); i != newObjectsEnd; ++i)
i->value->invalidatePaint();
// Have any of the old blocks changed?
SelectedBlockMap::iterator oldBlocksEnd = oldSelectedBlocks.end();
for (SelectedBlockMap::iterator i = oldSelectedBlocks.begin(); i != oldBlocksEnd; ++i) {
RenderBlock* block = i->key;
RenderBlockSelectionInfo* newInfo = newSelectedBlocks.get(block);
RenderBlockSelectionInfo* oldInfo = i->value.get();
if (!newInfo || oldInfo->rects() != newInfo->rects() || oldInfo->state() != newInfo->state()) {
oldInfo->invalidatePaint();
if (newInfo) {
newInfo->invalidatePaint();
newSelectedBlocks.remove(block);
}
}
}
// Any new blocks that remain were not found in the old blocks dict, and so they need to be updated.
SelectedBlockMap::iterator newBlocksEnd = newSelectedBlocks.end();
for (SelectedBlockMap::iterator i = newSelectedBlocks.begin(); i != newBlocksEnd; ++i)
i->value->invalidatePaint();
}
void RenderView::setSelection(RenderObject* start, int startPos, RenderObject* end, int endPos, SelectionRepaintMode blockRepaintMode)
{
// Make sure both our start and end objects are defined.
// Check www.msnbc.com and try clicking around to find the case where this happened.
if ((start && !end) || (end && !start))
return;
// Just return if the selection hasn't changed.
if (m_selectionStart == start && m_selectionStartPos == startPos &&
m_selectionEnd == end && m_selectionEndPos == endPos)
return;
// Record the old selected objects. These will be used later
// when we compare against the new selected objects.
int oldStartPos = m_selectionStartPos;
int oldEndPos = m_selectionEndPos;
// Objects each have a single selection rect to examine.
typedef HashMap<RenderObject*, OwnPtr<RenderSelectionInfo> > SelectedObjectMap;
SelectedObjectMap oldSelectedObjects;
SelectedObjectMap newSelectedObjects;
// Blocks contain selected objects and fill gaps between them, either on the left, right, or in between lines and blocks.
// In order to get the repaint rect right, we have to examine left, middle, and right rects individually, since otherwise
// the union of those rects might remain the same even when changes have occurred.
typedef HashMap<RenderBlock*, OwnPtr<RenderBlockSelectionInfo> > SelectedBlockMap;
SelectedBlockMap oldSelectedBlocks;
SelectedBlockMap newSelectedBlocks;
RenderObject* os = m_selectionStart;
RenderObject* stop = rendererAfterPosition(m_selectionEnd, m_selectionEndPos);
while (os && os != stop) {
if ((os->canBeSelectionLeaf() || os == m_selectionStart || os == m_selectionEnd) && os->selectionState() != SelectionNone) {
// Blocks are responsible for painting line gaps and margin gaps. They must be examined as well.
oldSelectedObjects.set(os, adoptPtr(new RenderSelectionInfo(os, true)));
if (blockRepaintMode == RepaintNewXOROld) {
RenderBlock* cb = os->containingBlock();
while (cb && !cb->isRenderView()) {
OwnPtr<RenderBlockSelectionInfo>& blockInfo = oldSelectedBlocks.add(cb, nullptr).iterator->second;
if (blockInfo)
break;
blockInfo = adoptPtr(new RenderBlockSelectionInfo(cb));
cb = cb->containingBlock();
}
}
}
os = os->nextInPreOrder();
}
// Now clear the selection.
SelectedObjectMap::iterator oldObjectsEnd = oldSelectedObjects.end();
for (SelectedObjectMap::iterator i = oldSelectedObjects.begin(); i != oldObjectsEnd; ++i)
i->first->setSelectionStateIfNeeded(SelectionNone);
// set selection start and end
m_selectionStart = start;
m_selectionStartPos = startPos;
m_selectionEnd = end;
m_selectionEndPos = endPos;
// Update the selection status of all objects between m_selectionStart and m_selectionEnd
if (start && start == end)
start->setSelectionStateIfNeeded(SelectionBoth);
else {
if (start)
start->setSelectionStateIfNeeded(SelectionStart);
if (end)
end->setSelectionStateIfNeeded(SelectionEnd);
}
RenderObject* o = start;
stop = rendererAfterPosition(end, endPos);
while (o && o != stop) {
if (o != start && o != end && o->canBeSelectionLeaf())
o->setSelectionStateIfNeeded(SelectionInside);
o = o->nextInPreOrder();
}
if (blockRepaintMode != RepaintNothing)
m_layer->clearBlockSelectionGapsBounds();
// Now that the selection state has been updated for the new objects, walk them again and
// put them in the new objects list.
o = start;
while (o && o != stop) {
if ((o->canBeSelectionLeaf() || o == start || o == end) && o->selectionState() != SelectionNone) {
newSelectedObjects.set(o, adoptPtr(new RenderSelectionInfo(o, true)));
RenderBlock* cb = o->containingBlock();
while (cb && !cb->isRenderView()) {
OwnPtr<RenderBlockSelectionInfo>& blockInfo = newSelectedBlocks.add(cb, nullptr).iterator->second;
if (blockInfo)
break;
blockInfo = adoptPtr(new RenderBlockSelectionInfo(cb));
cb = cb->containingBlock();
}
}
o = o->nextInPreOrder();
}
if (!m_frameView || blockRepaintMode == RepaintNothing)
return;
m_frameView->beginDeferredRepaints();
// Have any of the old selected objects changed compared to the new selection?
for (SelectedObjectMap::iterator i = oldSelectedObjects.begin(); i != oldObjectsEnd; ++i) {
RenderObject* obj = i->first;
RenderSelectionInfo* newInfo = newSelectedObjects.get(obj);
RenderSelectionInfo* oldInfo = i->second.get();
if (!newInfo || oldInfo->rect() != newInfo->rect() || oldInfo->state() != newInfo->state() ||
(m_selectionStart == obj && oldStartPos != m_selectionStartPos) ||
(m_selectionEnd == obj && oldEndPos != m_selectionEndPos)) {
oldInfo->repaint();
if (newInfo) {
newInfo->repaint();
newSelectedObjects.remove(obj);
}
}
}
// Any new objects that remain were not found in the old objects dict, and so they need to be updated.
SelectedObjectMap::iterator newObjectsEnd = newSelectedObjects.end();
for (SelectedObjectMap::iterator i = newSelectedObjects.begin(); i != newObjectsEnd; ++i)
i->second->repaint();
// Have any of the old blocks changed?
SelectedBlockMap::iterator oldBlocksEnd = oldSelectedBlocks.end();
for (SelectedBlockMap::iterator i = oldSelectedBlocks.begin(); i != oldBlocksEnd; ++i) {
RenderBlock* block = i->first;
RenderBlockSelectionInfo* newInfo = newSelectedBlocks.get(block);
RenderBlockSelectionInfo* oldInfo = i->second.get();
if (!newInfo || oldInfo->rects() != newInfo->rects() || oldInfo->state() != newInfo->state()) {
oldInfo->repaint();
if (newInfo) {
newInfo->repaint();
newSelectedBlocks.remove(block);
}
}
}
// Any new blocks that remain were not found in the old blocks dict, and so they need to be updated.
SelectedBlockMap::iterator newBlocksEnd = newSelectedBlocks.end();
for (SelectedBlockMap::iterator i = newSelectedBlocks.begin(); i != newBlocksEnd; ++i)
i->second->repaint();
m_frameView->endDeferredRepaints();
}
void RenderView::setSelection(RenderObject *s, int sp, RenderObject *e, int ep)
{
// Make sure both our start and end objects are defined.
// Check www.msnbc.com and try clicking around to find the case where this happened.
if ((s && !e) || (e && !s))
return;
// Just return if the selection hasn't changed.
if (m_selectionStart == s && m_selectionStartPos == sp &&
m_selectionEnd == e && m_selectionEndPos == ep)
return;
// Record the old selected objects. These will be used later
// when we compare against the new selected objects.
int oldStartPos = m_selectionStartPos;
int oldEndPos = m_selectionEndPos;
// Objects each have a single selection rect to examine.
typedef HashMap<RenderObject*, SelectionInfo*> SelectedObjectMap;
SelectedObjectMap oldSelectedObjects;
SelectedObjectMap newSelectedObjects;
// Blocks contain selected objects and fill gaps between them, either on the left, right, or in between lines and blocks.
// In order to get the repaint rect right, we have to examine left, middle, and right rects individually, since otherwise
// the union of those rects might remain the same even when changes have occurred.
typedef HashMap<RenderBlock*, BlockSelectionInfo*> SelectedBlockMap;
SelectedBlockMap oldSelectedBlocks;
SelectedBlockMap newSelectedBlocks;
RenderObject* os = m_selectionStart;
RenderObject* stop = rendererAfterPosition(m_selectionEnd, m_selectionEndPos);
while (os && os != stop) {
if ((os->canBeSelectionLeaf() || os == m_selectionStart || os == m_selectionEnd) && os->selectionState() != SelectionNone) {
// Blocks are responsible for painting line gaps and margin gaps. They must be examined as well.
oldSelectedObjects.set(os, new SelectionInfo(os));
RenderBlock* cb = os->containingBlock();
while (cb && !cb->isRenderView()) {
BlockSelectionInfo* blockInfo = oldSelectedBlocks.get(cb);
if (blockInfo)
break;
oldSelectedBlocks.set(cb, new BlockSelectionInfo(cb));
cb = cb->containingBlock();
}
}
os = os->nextInPreOrder();
}
// Now clear the selection.
SelectedObjectMap::iterator oldObjectsEnd = oldSelectedObjects.end();
for (SelectedObjectMap::iterator i = oldSelectedObjects.begin(); i != oldObjectsEnd; ++i)
i->first->setSelectionState(SelectionNone);
// set selection start and end
m_selectionStart = s;
m_selectionStartPos = sp;
m_selectionEnd = e;
m_selectionEndPos = ep;
// Update the selection status of all objects between m_selectionStart and m_selectionEnd
if (s && s == e)
s->setSelectionState(SelectionBoth);
else {
if (s)
s->setSelectionState(SelectionStart);
if (e)
e->setSelectionState(SelectionEnd);
}
RenderObject* o = s;
stop = rendererAfterPosition(e, ep);
while (o && o != stop) {
if (o != s && o != e && o->canBeSelectionLeaf())
o->setSelectionState(SelectionInside);
o = o->nextInPreOrder();
}
// Now that the selection state has been updated for the new objects, walk them again and
// put them in the new objects list.
o = s;
while (o && o != stop) {
if ((o->canBeSelectionLeaf() || o == s || o == e) && o->selectionState() != SelectionNone) {
newSelectedObjects.set(o, new SelectionInfo(o));
RenderBlock* cb = o->containingBlock();
while (cb && !cb->isRenderView()) {
BlockSelectionInfo* blockInfo = newSelectedBlocks.get(cb);
if (blockInfo)
break;
newSelectedBlocks.set(cb, new BlockSelectionInfo(cb));
cb = cb->containingBlock();
}
}
o = o->nextInPreOrder();
}
if (!m_frameView)
return;
// Have any of the old selected objects changed compared to the new selection?
for (SelectedObjectMap::iterator i = oldSelectedObjects.begin(); i != oldObjectsEnd; ++i) {
RenderObject* obj = i->first;
SelectionInfo* newInfo = newSelectedObjects.get(obj);
SelectionInfo* oldInfo = i->second;
if (!newInfo || oldInfo->rect() != newInfo->rect() || oldInfo->state() != newInfo->state() ||
(m_selectionStart == obj && oldStartPos != m_selectionStartPos) ||
(m_selectionEnd == obj && oldEndPos != m_selectionEndPos)) {
m_frameView->updateContents(oldInfo->rect());
if (newInfo) {
m_frameView->updateContents(newInfo->rect());
newSelectedObjects.remove(obj);
delete newInfo;
}
}
delete oldInfo;
}
// Any new objects that remain were not found in the old objects dict, and so they need to be updated.
SelectedObjectMap::iterator newObjectsEnd = newSelectedObjects.end();
for (SelectedObjectMap::iterator i = newSelectedObjects.begin(); i != newObjectsEnd; ++i) {
SelectionInfo* newInfo = i->second;
m_frameView->updateContents(newInfo->rect());
delete newInfo;
}
// Have any of the old blocks changed?
SelectedBlockMap::iterator oldBlocksEnd = oldSelectedBlocks.end();
for (SelectedBlockMap::iterator i = oldSelectedBlocks.begin(); i != oldBlocksEnd; ++i) {
RenderBlock* block = i->first;
BlockSelectionInfo* newInfo = newSelectedBlocks.get(block);
BlockSelectionInfo* oldInfo = i->second;
if (!newInfo || oldInfo->rects() != newInfo->rects() || oldInfo->state() != newInfo->state()) {
m_frameView->updateContents(oldInfo->rects());
if (newInfo) {
m_frameView->updateContents(newInfo->rects());
newSelectedBlocks.remove(block);
delete newInfo;
}
}
delete oldInfo;
}
// Any new blocks that remain were not found in the old blocks dict, and so they need to be updated.
SelectedBlockMap::iterator newBlocksEnd = newSelectedBlocks.end();
for (SelectedBlockMap::iterator i = newSelectedBlocks.begin(); i != newBlocksEnd; ++i) {
BlockSelectionInfo* newInfo = i->second;
m_frameView->updateContents(newInfo->rects());
delete newInfo;
}
}