//=======================================================================
// function: PrepareSetForFace
// purpose:
//=======================================================================
void NMTTools_PaveFiller::PrepareSetForFace(const Standard_Integer ,//nF1,
const Standard_Integer ,//nF2,
const BOPTools_ListOfPaveBlock& aLPBC,
BOPTools_PaveSet& aPSF)
{
Standard_Integer nV1, nV2;
TColStd_MapOfInteger aMap;
BOPTools_ListIteratorOfListOfPaveBlock anIt;
//
anIt.Initialize(aLPBC);
for (; anIt.More(); anIt.Next()) {
const BOPTools_PaveBlock& aPB=anIt.Value();
const BOPTools_Pave& aPave1=aPB.Pave1();
nV1=aPave1.Index();
if (!aMap.Contains(nV1)) {
aMap.Add(nV1);
aPSF.Append(aPave1);
}
const BOPTools_Pave& aPave2=aPB.Pave2();
nV2=aPave2.Index();
if (!aMap.Contains(nV2)) {
aMap.Add(nV2);
aPSF.Append(aPave2);
}
}
}
//=======================================================================
//function : MergeEdges
//purpose : auxilary
//=======================================================================
static Standard_Boolean MergeEdges(const TopTools_SequenceOfShape& SeqEdges,
const TopoDS_Face& aFace,
const Standard_Real Tol,
TopoDS_Edge& anEdge)
{
// make chain for union
BRep_Builder B;
ShapeAnalysis_Edge sae;
TopoDS_Edge FirstE = TopoDS::Edge(SeqEdges.Value(1));
TopoDS_Edge LastE = FirstE;
TopoDS_Vertex VF = sae.FirstVertex(FirstE);
TopoDS_Vertex VL = sae.LastVertex(LastE);
TopTools_SequenceOfShape aChain;
aChain.Append(FirstE);
TColStd_MapOfInteger IndUsedEdges;
IndUsedEdges.Add(1);
Standard_Integer j;
for(j=2; j<=SeqEdges.Length(); j++) {
for(Standard_Integer k=2; k<=SeqEdges.Length(); k++) {
if(IndUsedEdges.Contains(k)) continue;
TopoDS_Edge edge = TopoDS::Edge(SeqEdges.Value(k));
TopoDS_Vertex VF2 = sae.FirstVertex(edge);
TopoDS_Vertex VL2 = sae.LastVertex(edge);
if(sae.FirstVertex(edge).IsSame(VL)) {
aChain.Append(edge);
LastE = edge;
VL = sae.LastVertex(LastE);
IndUsedEdges.Add(k);
}
else if(sae.LastVertex(edge).IsSame(VF)) {
aChain.Prepend(edge);
FirstE = edge;
VF = sae.FirstVertex(FirstE);
IndUsedEdges.Add(k);
}
}
}
if(aChain.Length()<SeqEdges.Length()) {
MESSAGE ("can not create correct chain...");
return Standard_False;
}
// union edges in chain
// first step: union lines and circles
TopLoc_Location Loc;
Standard_Real fp1,lp1,fp2,lp2;
for(j=1; j<aChain.Length(); j++) {
TopoDS_Edge edge1 = TopoDS::Edge(aChain.Value(j));
Handle(Geom_Curve) c3d1 = BRep_Tool::Curve(edge1,Loc,fp1,lp1);
if(c3d1.IsNull()) break;
while(c3d1->IsKind(STANDARD_TYPE(Geom_TrimmedCurve))) {
Handle(Geom_TrimmedCurve) tc =
Handle(Geom_TrimmedCurve)::DownCast(c3d1);
c3d1 = tc->BasisCurve();
}
TopoDS_Edge edge2 = TopoDS::Edge(aChain.Value(j+1));
Handle(Geom_Curve) c3d2 = BRep_Tool::Curve(edge2,Loc,fp2,lp2);
if(c3d2.IsNull()) break;
while(c3d2->IsKind(STANDARD_TYPE(Geom_TrimmedCurve))) {
Handle(Geom_TrimmedCurve) tc =
Handle(Geom_TrimmedCurve)::DownCast(c3d2);
c3d2 = tc->BasisCurve();
}
if( c3d1->IsKind(STANDARD_TYPE(Geom_Line)) && c3d2->IsKind(STANDARD_TYPE(Geom_Line)) ) {
// union lines
Handle(Geom_Line) L1 = Handle(Geom_Line)::DownCast(c3d1);
Handle(Geom_Line) L2 = Handle(Geom_Line)::DownCast(c3d2);
gp_Dir Dir1 = L1->Position().Direction();
gp_Dir Dir2 = L2->Position().Direction();
//if(!Dir1.IsEqual(Dir2,Precision::Angular())) {
//if(!Dir1.IsParallel(Dir2,Precision::Angular())) {
if(!Dir1.IsParallel(Dir2,Tol)) {
continue;
}
// can union lines => create new edge
TopoDS_Vertex V1 = sae.FirstVertex(edge1);
gp_Pnt PV1 = BRep_Tool::Pnt(V1);
TopoDS_Vertex V2 = sae.LastVertex(edge2);
gp_Pnt PV2 = BRep_Tool::Pnt(V2);
gp_Vec Vec(PV1,PV2);
Handle(Geom_Line) L = new Geom_Line(gp_Ax1(PV1,Vec));
Standard_Real dist = PV1.Distance(PV2);
Handle(Geom_TrimmedCurve) tc = new Geom_TrimmedCurve(L,0.0,dist);
TopoDS_Edge E;
B.MakeEdge (E,tc,Precision::Confusion());
B.Add (E,V1); B.Add (E,V2);
B.UpdateVertex(V1, 0., E, 0.);
B.UpdateVertex(V2, dist, E, 0.);
//ShapeFix_Edge sfe;
//sfe.FixAddPCurve(E,aFace,Standard_False);
//sfe.FixSameParameter(E);
aChain.Remove(j);
aChain.SetValue(j,E);
j--;
}
if( c3d1->IsKind(STANDARD_TYPE(Geom_Circle)) && c3d2->IsKind(STANDARD_TYPE(Geom_Circle)) ) {
// union circles
Handle(Geom_Circle) C1 = Handle(Geom_Circle)::DownCast(c3d1);
Handle(Geom_Circle) C2 = Handle(Geom_Circle)::DownCast(c3d2);
gp_Pnt P01 = C1->Location();
gp_Pnt P02 = C2->Location();
if (P01.Distance(P02) > Precision::Confusion()) continue;
// can union circles => create new edge
TopoDS_Vertex V1 = sae.FirstVertex(edge1);
gp_Pnt PV1 = BRep_Tool::Pnt(V1);
TopoDS_Vertex V2 = sae.LastVertex(edge2);
gp_Pnt PV2 = BRep_Tool::Pnt(V2);
TopoDS_Vertex VM = sae.LastVertex(edge1);
gp_Pnt PVM = BRep_Tool::Pnt(VM);
GC_MakeCircle MC (PV1,PVM,PV2);
Handle(Geom_Circle) C = MC.Value();
TopoDS_Edge E;
if (!MC.IsDone() || C.IsNull()) {
// jfa for Mantis issue 0020228
if (PV1.Distance(PV2) > Precision::Confusion()) continue;
// closed chain
C = C1;
B.MakeEdge (E,C,Precision::Confusion());
B.Add(E,V1);
B.Add(E,V2);
}
else {
gp_Pnt P0 = C->Location();
gp_Dir D1(gp_Vec(P0,PV1));
gp_Dir D2(gp_Vec(P0,PV2));
Standard_Real fpar = C->XAxis().Direction().Angle(D1);
if(fabs(fpar)>Precision::Confusion()) {
// check orientation
gp_Dir ND = C->XAxis().Direction().Crossed(D1);
if(ND.IsOpposite(C->Axis().Direction(),Precision::Confusion())) {
fpar = -fpar;
}
}
Standard_Real lpar = C->XAxis().Direction().Angle(D2);
if(fabs(lpar)>Precision::Confusion()) {
// check orientation
gp_Dir ND = C->XAxis().Direction().Crossed(D2);
if(ND.IsOpposite(C->Axis().Direction(),Precision::Confusion())) {
lpar = -lpar;
}
}
if(lpar<fpar) lpar += 2*M_PI;
Handle(Geom_TrimmedCurve) tc = new Geom_TrimmedCurve(C,fpar,lpar);
B.MakeEdge (E,tc,Precision::Confusion());
B.Add(E,V1);
B.Add(E,V2);
B.UpdateVertex(V1, fpar, E, 0.);
B.UpdateVertex(V2, lpar, E, 0.);
}
aChain.Remove(j);
aChain.SetValue(j,E);
j--;
}
}
if (j < aChain.Length()) {
MESSAGE ("null curve3d in edge...");
return Standard_False;
}
if (aChain.Length() > 1) {
// second step: union edges with various curves
// skl for bug 0020052 from Mantis: perform such unions
// only if curves are bspline or bezier
bool NeedUnion = true;
for(j=1; j<=aChain.Length(); j++) {
TopoDS_Edge edge = TopoDS::Edge(aChain.Value(j));
Handle(Geom_Curve) c3d = BRep_Tool::Curve(edge,Loc,fp1,lp1);
if(c3d.IsNull()) continue;
while(c3d->IsKind(STANDARD_TYPE(Geom_TrimmedCurve))) {
Handle(Geom_TrimmedCurve) tc =
Handle(Geom_TrimmedCurve)::DownCast(c3d);
c3d = tc->BasisCurve();
}
if( ( c3d->IsKind(STANDARD_TYPE(Geom_BSplineCurve)) ||
c3d->IsKind(STANDARD_TYPE(Geom_BezierCurve)) ) ) continue;
NeedUnion = false;
break;
}
if(NeedUnion) {
MESSAGE ("can not make analitical union => make approximation");
TopoDS_Wire W;
B.MakeWire(W);
for(j=1; j<=aChain.Length(); j++) {
TopoDS_Edge edge = TopoDS::Edge(aChain.Value(j));
B.Add(W,edge);
}
Handle(BRepAdaptor_HCompCurve) Adapt = new BRepAdaptor_HCompCurve(W);
Approx_Curve3d Conv(Adapt,Tol,GeomAbs_C1,9,1000);
Handle(Geom_BSplineCurve) bc = Conv.Curve();
TopoDS_Edge E;
B.MakeEdge (E,bc,Precision::Confusion());
B.Add (E,VF);
B.Add (E,VL);
aChain.SetValue(1,E);
}
else {
MESSAGE ("can not make approximation for such types of curves");
return Standard_False;
}
}
anEdge = TopoDS::Edge(aChain.Value(1));
return Standard_True;
}
