enum TVerdict CTS_CEsockSendAndRecvData::doTestStepL( void )
{
TRequestStatus stat, stat2;
TBuf8<50> Data;
// Qos Channel(s)
for (TInt i = 0;i < iQoSSuite->iQoSChannel.Count();i++)
{
// Socket(s)
for (TInt i2 = 0;i2 < iQoSSuite->iQoSChannel[i]->GetSocketListCount() ;i2++)
{
// set up data buffers
HBufC8 * writebuf = HBufC8::NewMaxLC( iQoSSuite->iQoSChannel[i]->iPacketSize[i2] );
HBufC8 * readbuf = HBufC8::NewMaxLC( iQoSSuite->iQoSChannel[i]->iPacketSize[i2] );
TPtr8 ptrWritebuf = writebuf->Des();
TPtr8 ptrReadbuf = readbuf->Des();
TInt recvCount = 0;
Log( _L("QoS Channel <%d>, Socket <%d>"), i+1, i2+1);
// Send / Recv TCP
if (iQoSSuite->iQoSChannel[i]->iProtocol[i2] == KProtocolInetTcp)
{
Log( _L("Sending TCP data, %d packets of %d bytes = %d"),
iQoSSuite->iQoSChannel[i]->iPackets[i2], iQoSSuite->iQoSChannel[i]->iPacketSize[i2], iQoSSuite->iQoSChannel[i]->iPackets[i2] * iQoSSuite->iQoSChannel[i]->iPacketSize[i2]);
// Number of Packets to Send / Recv
for (TInt i4 = 0; i4 < iQoSSuite->iQoSChannel[i]->iPackets[i2]; i4++)
{
// initialise data
Data.Format(_L8("TCP-packet:%d helloworld"),i4);
ptrWritebuf.Repeat( Data );
// write data
iQoSSuite->iQoSChannel[i]->GetSocketHandle(i2)->Write(ptrWritebuf, stat);
User::WaitForRequest(stat);
TESTL(stat==KErrNone);
// read data
iQoSSuite->iQoSChannel[i]->GetSocketHandle(i2)->Read(ptrReadbuf, stat);
User::WaitForRequest(stat);
TESTL(stat==KErrNone);
// compare the data
TESTL( ptrWritebuf.Compare( ptrReadbuf ) == 0);
recvCount+=ptrReadbuf.Length();
}
// writebuf and readbuf
CleanupStack::PopAndDestroy(2);
}
// Send / Recv UDP
if (iQoSSuite->iQoSChannel[i]->iProtocol[i2] == KProtocolInetUdp)
{
Log( _L("Send Udp Data, %d packets of %d bytes = %d"),
iQoSSuite->iQoSChannel[i]->iPackets[i2], iQoSSuite->iQoSChannel[i]->iPacketSize[i2], iQoSSuite->iQoSChannel[i]->iPackets[i2] * iQoSSuite->iQoSChannel[i]->iPacketSize[i2]);
// Number of Packets to Send / Recv
for (TInt i4 = 0; i4 < iQoSSuite->iQoSChannel[i]->iPackets[i2]; i4++)
{
// initialise data
Data.Format(_L8("UDP-packet:%d helloworld"),i4);
ptrWritebuf.Repeat( Data );
// write data
iQoSSuite->iQoSChannel[i]->GetSocketHandle(i2)->SendTo(ptrWritebuf, iQoSSuite->iQoSChannel[i]->iDestAddr[i2], 0, stat);
User::WaitForRequest(stat);
TESTL(stat==KErrNone);
iQoSSuite->iQoSChannel[i]->GetSocketHandle(i2)->RecvFrom(ptrReadbuf, iQoSSuite->iQoSChannel[i]->iDestAddr[i2], 0, stat2);
User::WaitForRequest(stat2);
TESTL(stat==KErrNone);
// compare the data
TESTL( ptrWritebuf.Compare( ptrReadbuf ) == 0 );
recvCount += ptrReadbuf.Length();
}
// writebuf and readbuf
CleanupStack::PopAndDestroy(2);
}
// check the total received (95 per cent is allowable for us)
TESTL(recvCount*iQoSSuite->iQoSChannel[i]->iPacketSize[i2] > (0.95*(iQoSSuite->iQoSChannel[i]->iPackets[i2]*iQoSSuite->iQoSChannel[i]->iPacketSize[i2])) );
}
}
return EPass;
}
TVerdict CBigSendRecvRtp::doTestStepL()
/**
* @return - TVerdict code
*/
{
SetTestStepResult(EFail);
if(KErrNone == InitSocketsL())
{
iIpAddrDest1.SetPort(9000);
RBuf8 sendBuf;
sendBuf.CreateMax(KBufferSize1);
sendBuf.CleanupClosePushL();
RBuf8 recvBuf;
recvBuf.CreateMax(KBufferSize1);
recvBuf.CleanupClosePushL();
/* Fill the buffer with given character upto its length */
sendBuf.Fill('Q');
TRequestStatus status;
/* do a Send of the data */
iRtpSocket.SendTo(sendBuf, iIpAddrDest1, NULL, status);
User::WaitForRequest(status);
User::LeaveIfError(status.Int());
/* Now do a Receive */
recvBuf.FillZ();
iRtpSocket.RecvFrom(recvBuf,iIpAddrDest1,NULL,status);
User::WaitForRequest(status);
User::LeaveIfError(status.Int());
/* Obtain a TPtr of the data excluding the RTP header */
TPtr8 sendBufPtr = sendBuf.MidTPtr(KRtpHeaderSize);
TPtr8 recvBufPtr = recvBuf.MidTPtr(KRtpHeaderSize);
/* Check if the data received is the same as the data sent */
TInt ret = sendBufPtr.Compare(recvBufPtr);
if(ret == 0)
{
/* Increase the buffer size and fill it up with given data */
sendBuf.ReAlloc(KBufferSize2);
recvBuf.ReAlloc(KBufferSize2);
sendBuf.Fill('Q', KBufferSize2);
/* Send the larger data */
iRtpSocket.SendTo(sendBuf, iIpAddrDest1, NULL, status);
User::WaitForRequest(status);
User::LeaveIfError(status.Int());
/* Now do a Receive */
recvBuf.FillZ(KBufferSize2);
iRtpSocket.RecvFrom(recvBuf,iIpAddrDest1,NULL,status);
User::WaitForRequest(status);
User::LeaveIfError(status.Int());
/* Get pointer to data and compare both of them */
TPtr8 sendBufPtr = sendBuf.MidTPtr(KRtpHeaderSize);
TPtr8 recvBufPtr = recvBuf.MidTPtr(KRtpHeaderSize);
TInt ret = sendBufPtr.Compare(recvBufPtr);
if(ret == 0)
{
SetTestStepResult(EPass);
}
}
CleanupStack::PopAndDestroy(2);
}
return TestStepResult();
}
TVerdict CSymmetricMacIncrementalWithReplicateStep::doTestStepL()
{
//Assume faliure, unless all is successful
SetTestStepResult(EFail);
INFO_PRINTF1(_L("*** Symmetric Mac - Incremental with Replicate ***"));
INFO_PRINTF2(_L("HEAP CELLS: %d"), User::CountAllocCells());
TPtrC keyPath;
TPtrC sourcePath;
TVariantPtrC algorithm;
if( !GetStringFromConfig(ConfigSection(),KConfigEncryptKeyPath, keyPath) ||
!GetStringFromConfig(ConfigSection(),KConfigAlgorithmUid, algorithm) ||
!GetStringFromConfig(ConfigSection(),KConfigSourcePath, sourcePath))
{
User::Leave(KErrNotFound);
}
// Create key
TKeyProperty keyProperty;
CCryptoParams* keyParams = CCryptoParams::NewLC();
HBufC8* convertKey = ReadInHexPlainTextL(keyPath);
CleanupStack::PushL(convertKey);
keyParams->AddL(*convertKey, KSymmetricKeyParameterUid);
CKey* key=CKey::NewL(keyProperty, *keyParams);
CleanupStack::PushL(key);
//Create a pointer for the Hmac Implementation Object
CMac* macImpl= NULL;
//Retrieve a Mac Factory Object
TRAPD(err,CMacFactory::CreateMacL(macImpl,
algorithm,
*key,
NULL));
if (err != KErrNone)
{
CleanupStack::PopAndDestroy(3, keyParams); // keyParams, convertKey, key
delete macImpl;
ERR_PRINTF2(_L("*** FAIL: Failed to Create Symmetric Mac Object - %d ***"), err);
return EFail;
}
INFO_PRINTF1(_L("Plugin loaded."));
//Push the Mac Implementation Object onto the Cleanup Stack
CleanupStack::PushL(macImpl);
RFs fsSession;
User::LeaveIfError(fsSession.Connect());
CleanupClosePushL(fsSession);
RFile sourceFile;
CleanupClosePushL(sourceFile);
//Open the specified source file
User::LeaveIfError(sourceFile.Open(fsSession,sourcePath, EFileRead));
TInt sourceLength = 0;
TInt readPosition = 0;
TInt readIncrement = 0;
TBool macComplete = EFalse;
TBool macReplicated = EFalse;
TPtrC8 macStr;
CMac* macReplicateImpl = NULL;
User::LeaveIfError(sourceFile.Size(sourceLength));
//Divide the total size of the source file up into individual equal sized blocks to read
//over several increments
readIncrement = sourceLength/KDataReadBlocks;
if (readIncrement == 0)
{
ERR_PRINTF2(_L("*** Error: Source File must be larger than %d bytes ***"), KDataReadBlocks);
User::LeaveIfError(KErrNotSupported);
}
do
{
//Create a heap based descriptor to store the data
HBufC8* sourceData = HBufC8::NewL(readIncrement);
CleanupStack::PushL(sourceData);
TPtr8 sourcePtr = sourceData->Des();
//Read in a block of data from the source file from the current position
err = sourceFile.Read(readPosition,sourcePtr,readIncrement);
HBufC8* convertSrc = ConvertFromHexFormatToRawL(*sourceData);
CleanupStack::PopAndDestroy(sourceData);
CleanupStack::PushL(convertSrc);
//Update the read position by adding the number of bytes read
readPosition += readIncrement;
if(readPosition == readIncrement)
{
//Read in the first block from the data file into the Mac implementation object
if(macReplicated == EFalse)
{
macImpl->MacL(*convertSrc);
INFO_PRINTF2(_L("Intial Mac - Bytes Read: %d"), readPosition);
}
else
{
macReplicateImpl->MacL(*convertSrc);
INFO_PRINTF2(_L("Intial Mac (Replicate) - Bytes Read: %d"), readPosition);
}
CleanupStack::PopAndDestroy(convertSrc);
}
else if(readPosition >= sourceLength)
{
//Reading in the final block, constructs the complete hash value and returns it within a TPtrC8
macStr.Set(macReplicateImpl->FinalL(*convertSrc));
CleanupStack::PopAndDestroy(convertSrc);
//Sets the Complete Flag to ETrue in order to drop out of the loop
macComplete = ETrue;
TInt totalRead = (readPosition - readIncrement) + (*sourceData).Length();
INFO_PRINTF2(_L("Final Mac - Bytes Read: %d"),totalRead);
}
//If the read position is half the source length and the implementation
//object hasn't already been replicated
else if((readPosition >= sourceLength/2) && (macReplicated == EFalse))
{
INFO_PRINTF1(_L("Replicating Mac Object..."));
macImpl->UpdateL(*convertSrc);
CleanupStack::PopAndDestroy(convertSrc);
//Create a Copy of the existing Mac Object with NO internal message state
macReplicateImpl = macImpl->ReplicateL();
macReplicated = ETrue;
//Sets the read position back to 0 inorder to restart the file read from the beginning
readPosition =0;
CleanupStack::PushL(macReplicateImpl);
INFO_PRINTF2(_L("*** Mac REPLICATE - Bytes Read: %d ***"), readPosition);
}
else
{
//Update the message data within the Mac object with the new block
if(macReplicated == EFalse)
{
macImpl->UpdateL(*convertSrc);
INFO_PRINTF2(_L("Mac Update - Bytes Read: %d"), readPosition);
}
else
{
macReplicateImpl->UpdateL(*convertSrc);
INFO_PRINTF2(_L("Mac Update (Replicate) - Bytes Read: %d"), readPosition);
}
CleanupStack::PopAndDestroy(convertSrc);
}
}while(macComplete == EFalse);
//Create a NULL TCharacteristics pointer
const TCharacteristics* charsPtr(NULL);
//Retrieve the characteristics for the mac implementation object
TRAP_LOG(err, macImpl->GetCharacteristicsL(charsPtr));
//Static cast the characteristics to type TMacCharacteristics
const TMacCharacteristics* macCharsPtr = static_cast<const TMacCharacteristics*>(charsPtr);
//The mac output size is returned in Bits, divide by 8 to get the Byte size
TInt macSize = macCharsPtr->iCipherAlgorithmChar->iBlockSize/8;
HBufC8* macData = HBufC8::NewLC(macSize);
TPtr8 macPtr = macData->Des();
macPtr.Copy(macStr);
//Check that expected data equals the encrypted data
HBufC8* encryptedFileData = ReadInHexCiphertextL();
CleanupStack::PushL(encryptedFileData);
if( !macPtr.Compare(TPtrC8(*encryptedFileData)))
{
INFO_PRINTF1(_L("*** Mac - Incremental with Replicate : PASS ***"));
SetTestStepResult(EPass);
}
else
{
ERR_PRINTF2(_L("*** FAIL: Mac Mismatch ***"), err);
}
CleanupStack::PopAndDestroy(9, keyParams); // keyParams, convertKey, key, macImpl, &fsSession, &sourceFile, macReplicateImpl, macData, encryptedFileData
INFO_PRINTF2(_L("HEAP CELLS: %d"), User::CountAllocCells());
return TestStepResult();
}
/*
* Wave file structure: Riff header + Wave format chunk + Wave data chunk
*
* Riff header:
* ==================================================
* Offset Size Description Value
* 0x00 4 Chunk ID "RIFF"
* 0x04 4 Chunk Data Size ( file size ) - 8
* 0x08 4 RIFF Type "WAVE"
* 0x0c * Wave chunks *
*
* Wave Format Chunk:
* ==================================================
* Offset Size Description Value
* 0x00 4 Chunk ID "fmt "
* 0x04 4 Chunk Data Size 16 + extra format bytes ( 0 for normal wav files)
* 0x08 2 Compression code 1...65535 ( 1 for PCM uncompressed)
* 0x0a 2 Nbr of channels 1...65535
* 0x0c 4 Sample rate 1...0xFFFFFFFF
* 0x10 4 Average bytes per sec
* 0x14 2 block align
* 0x16 2 siginificant bits per sample
* 0x18 2 extra format bytes 0...65535
* 0x1a * extra format bytes, if any *
*
* Wave Data Chunk:
* ==================================================
* Offset Size Description Value
* 0x00 4 Chunk ID "data"
* 0x04 4 Chunk data size
* 0x08 * sample data *
*
*/
void CTactileAudioPlayer::ReadSampleL( RFile& aFile,
HBufC8*& aDes,
TUint& aChannels,
TUint& aSampleRate )
{
TRACE("CTactileAudioPlayer::ReadSampleL - Start");
const TInt fmtOffset = 0x0c;
const TInt dataOffset = fmtOffset + 0x18;
TBuf8<KRiffHeaderSize> header;
TInt err = aFile.Read( header, KRiffHeaderSize );
if ( err )
{
TRACE("CTactileAudioPlayer::ReadSampleL: reading from file failed, aborting");
User::Leave( err );
}
TPtr8 p = header.LeftTPtr( 4 );
if ( p.Compare( KRiff ) )
{
TRACE("CTactileAudioPlayer::ReadSampleL: no RIFF header found, aborting" );
User::Leave( KErrCorrupt );
}
p = header.MidTPtr( 0x08, 4 );
if ( p.Compare( KWave ) )
{
TRACE("CTactileAudioPlayer::ReadSampleL: not a WAVE file, aborting" );
User::Leave( KErrCorrupt );
}
p = header.MidTPtr( fmtOffset + 0x00, 4 );
if ( p.Compare( KFmt ) )
{
TRACE("CTactileAudioPlayer::ReadSampleL: no 'fmt ' chunk found, aborting" );
User::Leave( KErrCorrupt );
}
p = header.MidTPtr( dataOffset, 4 );
if ( p.Compare( KData ) )
{
TRACE("CTactileAudioPlayer::ReadSampleL: no 'data' chunk found, aborting" );
User::Leave( KErrCorrupt );
}
TUint8 lo = header[ fmtOffset + 0x08 ];
TUint8 hi = header[ fmtOffset + 0x08 + 1 ];
if ( !( lo == 1 && hi == 0) )
{
TRACE("CTactileAudioPlayer::ReadSampleL: non PCM wav not supported, aborting" );
User::Leave( KErrNotSupported );
}
lo = header[ fmtOffset + 0x0a ];
hi = header[ fmtOffset + 0x0a + 1 ];
aChannels = lo;
if ( !(aChannels == 1 || aChannels == 2 && hi == 0) )
{
TRACE2("CTactileAudioPlayer::ReadSampleL: unsupported number of channels ( %d ), aborting", aChannels );
User::Leave( KErrNotSupported );
}
aSampleRate = 0;
for ( TInt i = 0; i < 4; i++ )
{
lo = header[ fmtOffset + 0x0c + i ];
TUint32 tmp = lo;
tmp = tmp << i * 8;
aSampleRate = aSampleRate | tmp;
}
lo = header[ fmtOffset + 0x16 ];
hi = header[ fmtOffset + 0x16 + 1 ];
TUint16 bitsPerSample = hi;
bitsPerSample = bitsPerSample << 8;
bitsPerSample = bitsPerSample | lo;
if ( bitsPerSample != 16 )
{
TRACE2("CTactileAudioPlayer::ReadSampleL: %d bits per sample not supported", bitsPerSample );
User::Leave( KErrNotSupported );
}
TUint32 bytesPerSample = bitsPerSample / 8;
// how many bytes for 6 ms
TUint bytesNeeded = ( aSampleRate * aChannels * bytesPerSample * 6 ) / 1000;
TInt fsize( 0 );
if ( aFile.Size( fsize ) == KErrNone && fsize >= bytesNeeded + KRiffHeaderSize )
{
aDes = HBufC8::NewL( bytesNeeded );
TPtr8 des = aDes->Des();
aFile.Read( des, bytesNeeded );
}
else
{
TRACE("CTactileAudioPlayer::ReadSampleL: Less than 6ms content in file, aborting" );
User::Leave( KErrNotSupported );
}
TRACE3("CTactileAudioPlayer::ReadSampleL %dHz %dchannel sample read successfully - End",
iSampleRate, iChannels);
}
// -----------------------------------------------------------------------------
// CBSBrandHandler::ReadStreamL()
// -----------------------------------------------------------------------------
//
MBSElement* CBSBrandHandler::ReadStreamL( const TDesC8& aId, RFileReadStream& aStream,
TBool aAllowEmptyId /* = EFalse */ )
{
TRACE( T_LIT( "CBSBrandHandler::ReadStreamL BEGIN"));
TBSElementType type = (TBSElementType)aStream.ReadInt16L();
MBSElement* returnValue = NULL;
TInt idSize = aStream.ReadInt16L();
HBufC8* elementId = HBufC8::NewLC( idSize );
TPtr8 elementIdPtr = elementId->Des();
if( idSize == 0 && aAllowEmptyId )
{
// we don't read empty ID
}
else
{
aStream.ReadL( elementIdPtr, idSize );
elementIdPtr.SetLength( idSize );// Set length
}
TBool match = EFalse;
if( aAllowEmptyId || ( 0 == elementIdPtr.Compare( aId ) ) )
{
match = ETrue;
}
TPtrC8 idPtrC( *elementId );// idPtrC creation moved here so it will be updated correctly.
if( elementId->Length() == 0 )
{
CleanupStack::PopAndDestroy( elementId );
elementId = NULL;
idPtrC.Set( KNullDesC8 );
}
switch( type )
{
case EBSInt:
{
TInt intData = aStream.ReadInt16L();
TRACE( T_LIT( "CBSBrandHandler::ReadStreamL type INT"));
if( match )
{
// Codescanner warning: neglected to put variable on cleanup stack (id:35)
// This method cannot leave after this line
returnValue = BSElementFactory::CreateBSElementL( idPtrC, // CSI: 35 # See above
EBSInt,
intData );
}
break;
}
case EBSText:
case EBSFile: // flow through
{
TInt textSize = aStream.ReadInt16L();
HBufC* textData = HBufC::NewLC( textSize );
TPtr textPtr = textData->Des();
aStream.ReadL( textPtr, textSize );
TRACE( T_LIT( "CBSBrandHandler::ReadStreamL type TEXT/ FILE"));
if( match )
{
// Codescanner warning: neglected to put variable on cleanup stack (id:35)
// This method cannot leave after this line
returnValue = BSElementFactory::CreateBSElementL( idPtrC, // CSI: 35 # See above
type,
*textData );
}
CleanupStack::PopAndDestroy( textData );
break;
}
case EBSList:
{
RBSObjOwningPtrArray<MBSElement> listData;
CleanupClosePushL( listData );
TInt count = aStream.ReadInt16L();
for( TInt i = 0; i < count; i++ )
{
MBSElement* subElement = ReadStreamL( KNullDesC8, aStream, ETrue );
CleanupDeletePushL( subElement );
listData.AppendL( subElement );
CleanupStack::Pop(); // subElement
}
if( match )
{
// Codescanner warning: neglected to put variable on cleanup stack (id:35)
// This method cannot leave after this line
returnValue = BSElementFactory::CreateBSElementL( idPtrC, // CSI: 35 # See above
EBSList,
listData );
}
CleanupStack::Pop(); // listData
break;
}
case EBSBuffer:
{
TInt bufferSize = aStream.ReadInt16L();
HBufC8* buffeData = HBufC8::NewLC( bufferSize );
TPtr8 bufferPtr = buffeData->Des();
aStream.ReadL( bufferPtr, bufferSize );
if( match )
{
// Codescanner warning: neglected to put variable on cleanup stack (id:35)
// This method cannot leave after this line
returnValue = BSElementFactory::CreateBSElementL( idPtrC, // CSI: 35 # See above
EBSBuffer,
*buffeData );
}
CleanupStack::PopAndDestroy( buffeData );
break;
}
case EBSBitmap:
{
TInt length = aStream.ReadInt16L();
HBufC8* fileId = HBufC8::NewLC( length );
TPtr8 fileIdPtr = fileId->Des();
aStream.ReadL( fileIdPtr, length );
TInt bitmapId = aStream.ReadInt16L();
TInt maskId = aStream.ReadInt16L();
TInt skinId = aStream.ReadInt16L();
TInt skinMaskId = aStream.ReadInt16L();
TRACE( T_LIT( "CBSBrandHandler::ReadStreamL type BITMAP .. bitmap ID is [%d]"), bitmapId);
if( match )
{
CBSBitmap* bitmap = CBSBitmap::NewLC( bitmapId,
maskId,
skinId,
skinMaskId,
fileIdPtr );
// Codescanner warning: neglected to put variable on cleanup stack (id:35)
// This method cannot leave after this line
returnValue = BSElementFactory::CreateBSElementL( idPtrC, // CSI: 35 # See above
EBSBitmap,
bitmap );
CleanupStack::Pop( bitmap );
}
CleanupStack::PopAndDestroy( fileId );
break;
}
default:
{
TRACE( T_LIT( "CBSBrandHandler::ReadStreamL type DEFAULT : corrupt"));
User::Leave( KErrCorrupt );
break;
}
}
if( elementId )
{
CleanupStack::PopAndDestroy( elementId );
}
TRACE( T_LIT( "CBSBrandHandler::ReadStreamL END"));
return returnValue;
}
void CMultipleArray::SendAndRecvL(TInt aExtraSocksToJoin)
{
TRequestStatus stat;
TBuf8<50> Data;
// set up data buffers
HBufC8 * writebuf = HBufC8::NewMaxLC( iPacketSize[aExtraSocksToJoin] );
HBufC8 * readbuf = HBufC8::NewMaxLC( iPacketSize[aExtraSocksToJoin] );
TPtr8 ptrWritebuf = writebuf->Des();
TPtr8 ptrReadbuf = readbuf->Des();
TInt recvCount = 0;
// Send / Recv TCP
if (iProtocol[aExtraSocksToJoin] == KProtocolInetTcp)
{
for (TInt i = 0; i < iPackets[aExtraSocksToJoin]; i++)
{
iQoSStep->iQoSSuite->Log( _L("Sending TCP data, %d packets of %d bytes = %d"),
iPackets[aExtraSocksToJoin], iPacketSize[aExtraSocksToJoin], iPackets[aExtraSocksToJoin] * iPacketSize[aExtraSocksToJoin]);
// initialise data
Data.Format(_L8("TCP-packet:%d helloworld"),i);
ptrWritebuf.Repeat( Data );
// write data
GetSocketHandle(aExtraSocksToJoin)->Write(ptrWritebuf, stat);
User::WaitForRequest(stat);
if (stat!=KErrNone)
{
iQoSStep->iQoSSuite->Log(_L("Failed to write tcp data to destination: return value = <%d>"), stat);
User::Leave(stat.Int());
}
// read data
GetSocketHandle(aExtraSocksToJoin)->Read(ptrReadbuf, stat);
User::WaitForRequest(stat); //, TimerStatus);
if (stat!=KErrNone)
{
iQoSStep->iQoSSuite->Log(_L("Failed to read tcp data from destination: return value = <%d>"), stat);
User::Leave(stat.Int());
}
// compare the data
if (ptrWritebuf.Compare( ptrReadbuf ) != 0)
{
iQoSStep->iQoSSuite->Log(_L("Data written to and read from destination address do not match in size"));
// return Fail;
}
recvCount+=ptrReadbuf.Length();
}
CleanupStack::PopAndDestroy(2); // writebuf and readbuf
}
// Send / Recv UDP
if (iProtocol[aExtraSocksToJoin] == KProtocolInetUdp)
{
iQoSStep->iQoSSuite->Log( _L("Send Udp Data, %d packets of %d bytes = %d"),
iPackets[aExtraSocksToJoin], iPacketSize[aExtraSocksToJoin], iPackets[aExtraSocksToJoin] * iPacketSize[aExtraSocksToJoin]);
for (TInt i = 0; i < iPackets[aExtraSocksToJoin]; i++)
{
// initialise data
Data.Format(_L8("UDP-packet:%d helloworld"),i);
ptrWritebuf.Repeat( Data );
// write data
GetSocketHandle(aExtraSocksToJoin)->Send(ptrWritebuf, 0, stat);
User::WaitForRequest(stat);
if (stat!=KErrNone)
{
iQoSStep->iQoSSuite->Log(_L("Failed to write udp data to destination: return value = <%d>"), stat);
User::Leave(stat.Int());
}
GetSocketHandle(aExtraSocksToJoin)->Recv(ptrReadbuf, 0, stat);
User::WaitForRequest(stat);
if (stat!=KErrNone)
{
iQoSStep->iQoSSuite->Log(_L("Failed to read udp data from destination: return value = <%d>"), stat);
User::Leave(stat.Int());
}
// compare the data
if (ptrWritebuf.Compare( ptrReadbuf ) != 0 )
{
iQoSStep->iQoSSuite->Log(_L("Data written to and read from destination address do not match in sizevalue"));
// return Fail;
}
recvCount += ptrReadbuf.Length();
}
// get rid of the old buffers
CleanupStack::PopAndDestroy(2); // writebuf and readbuf
}
// check the total received (95 per cent is allowable for us)
if (recvCount*iPacketSize[aExtraSocksToJoin] < (0.95*(iPackets[aExtraSocksToJoin]*iPacketSize[aExtraSocksToJoin])))
{
iQoSStep->iQoSSuite->Log(_L("The total packets received is less than 95 per cent of the overall packets sent"));
// return Fail;
}
}