bool SMESH_MesherHelper::GetNodeUVneedInFaceNode(const TopoDS_Face& F) const
{
if ( F.IsNull() ) return !mySeamShapeIds.empty();
if ( !F.IsNull() && !myShape.IsNull() && myShape.IsSame( F ))
return !mySeamShapeIds.empty();
Handle(Geom_Surface) aSurface = BRep_Tool::Surface( F );
if ( !aSurface.IsNull() )
return ( aSurface->IsUPeriodic() || aSurface->IsVPeriodic() );
return false;
}
// TODO: This code is taken from and duplicates code in Part2DObject::positionBySupport()
// Note: We cannot return a reference, because it will become Null.
// Not clear where, because we check for IsNull() here, but as soon as it is passed out of
// this method, it becomes null!
const TopoDS_Face SketchBased::getSupportFace() const {
const App::PropertyLinkSub& Support = static_cast<Part::Part2DObject*>(Sketch.getValue())->Support;
Part::Feature *part = static_cast<Part::Feature*>(Support.getValue());
if (!part || !part->getTypeId().isDerivedFrom(Part::Feature::getClassTypeId()))
throw Base::Exception("Sketch has no support shape");
const std::vector<std::string> &sub = Support.getSubValues();
assert(sub.size()==1);
// get the selected sub shape (a Face)
const Part::TopoShape &shape = part->Shape.getShape();
if (shape._Shape.IsNull())
throw Base::Exception("Sketch support shape is empty!");
TopoDS_Shape sh = shape.getSubShape(sub[0].c_str());
if (sh.IsNull())
throw Base::Exception("Null shape in SketchBased::getSupportFace()!");
const TopoDS_Face face = TopoDS::Face(sh);
if (face.IsNull())
throw Base::Exception("Null face in SketchBased::getSupportFace()!");
BRepAdaptor_Surface adapt(face);
if (adapt.GetType() != GeomAbs_Plane)
throw Base::Exception("No planar face in SketchBased::getSupportFace()!");
return face;
}
gp_Dir GetFaceNormalAtUV(const TopoDS_Face &face, double u, double v, gp_Pnt *pos){
if(face.IsNull()) return gp_Dir(0, 0, 1);
try
{
Handle(Geom_Surface) surf=BRep_Tool::Surface(face); // get surface properties
GeomLProp_SLProps props(surf, u, v, 1, 0.01); // get surface normal
if(!props.IsNormalDefined())return gp_Dir(0, 0, 1);
gp_Dir norm=props.Normal(); // check orientation
if(pos)*pos = props.Value();
if(face.Orientation()==TopAbs_REVERSED) norm.Reverse();
return norm;
}
catch (Standard_Failure) {
Handle_Standard_Failure e = Standard_Failure::Caught();
wxMessageBox(wxString(_("Error in GetFaceNormalAtUV")) + _T(": ") + Ctt(e->GetMessageString()));
return gp_Dir(0, 0, 1);
}
catch (const char* str)
{
wxMessageBox(wxString(_("Error in GetFaceNormalAtUV")) + _T(": ") + Ctt(str));
return gp_Dir(0, 0, 1);
}
catch (...)
{
wxMessageBox(_("Error in GetFaceNormalAtUV"));
return gp_Dir(0, 0, 1);
}
}
void PointOnFacesProjector::prepare(const TopoDS_Shape& faces)
{
d->clear();
// Build the UB tree for binary search of points
internal::UBTreeOfNodeIndicesFiller_t ubTreeFiller(d->m_ubTree, Standard_False);
for (TopExp_Explorer exp(faces, TopAbs_FACE); exp.More(); exp.Next()) {
const TopoDS_Face face = TopoDS::Face(exp.Current());
if (!face.IsNull()) {
TopLoc_Location loc;
const Handle_Poly_Triangulation& triangulation = BRep_Tool::Triangulation(face, loc);
if (!triangulation.IsNull()) {
d->insertMapping(triangulation, face);
const gp_Trsf& trsf = loc.Transformation();
const TColgp_Array1OfPnt& nodes = triangulation->Nodes();
for (int i = nodes.Lower(); i <= nodes.Upper(); ++i) {
const gp_Pnt iNode(nodes(i).Transformed(trsf));
Bnd_Box ibb;
ibb.Set(iNode);
ubTreeFiller.Add(std::make_pair(i, triangulation), ibb);
}
}
}
}
ubTreeFiller.Fill();
}
void ProfileBased::getUpToFaceFromLinkSub(TopoDS_Face& upToFace,
const App::PropertyLinkSub& refFace)
{
App::DocumentObject* ref = refFace.getValue();
std::vector<std::string> subStrings = refFace.getSubValues();
if (ref == NULL)
throw Base::ValueError("SketchBased: Up to face: No face selected");
if (ref->getTypeId().isDerivedFrom(App::Plane::getClassTypeId())) {
upToFace = TopoDS::Face(makeShapeFromPlane(ref));
return;
} else if (ref->getTypeId().isDerivedFrom(PartDesign::Plane::getClassTypeId())) {
Part::Datum* datum = static_cast<Part::Datum*>(ref);
upToFace = TopoDS::Face(datum->getShape());
return;
}
if (!ref->getTypeId().isDerivedFrom(Part::Feature::getClassTypeId()))
throw Base::TypeError("SketchBased: Up to face: Must be face of a feature");
Part::TopoShape baseShape = static_cast<Part::Feature*>(ref)->Shape.getShape();
if (subStrings.empty() || subStrings[0].empty())
throw Base::ValueError("SketchBased: Up to face: No face selected");
// TODO: Check for multiple UpToFaces?
upToFace = TopoDS::Face(baseShape.getSubShape(subStrings[0].c_str()));
if (upToFace.IsNull())
throw Base::ValueError("SketchBased: Up to face: Failed to extract face");
}
// Note: We cannot return a reference, because it will become Null.
// Not clear where, because we check for IsNull() here, but as soon as it is passed out of
// this method, it becomes null!
const TopoDS_Face ProfileBased::getSupportFace() const {
const Part::Part2DObject* sketch = getVerifiedSketch();
if (sketch->MapMode.getValue() == Attacher::mmFlatFace && sketch->Support.getValue()) {
const auto &Support = sketch->Support;
App::DocumentObject* ref = Support.getValue();
Part::Feature *part = static_cast<Part::Feature*>(ref);
if (part && part->getTypeId().isDerivedFrom(Part::Feature::getClassTypeId())) {
const std::vector<std::string> &sub = Support.getSubValues();
assert(sub.size()==1);
if (sub.at(0) == "") {
// This seems to happen when sketch is on a datum plane
return TopoDS::Face(Feature::makeShapeFromPlane(sketch));
}
// get the selected sub shape (a Face)
const Part::TopoShape &shape = part->Shape.getShape();
if (shape.getShape().IsNull())
throw Base::ValueError("Sketch support shape is empty!");
TopoDS_Shape sh = shape.getSubShape(sub[0].c_str());
if (sh.IsNull())
throw Base::ValueError("Null shape in SketchBased::getSupportFace()!");
const TopoDS_Face face = TopoDS::Face(sh);
if (face.IsNull())
throw Base::ValueError("Null face in SketchBased::getSupportFace()!");
BRepAdaptor_Surface adapt(face);
if (adapt.GetType() != GeomAbs_Plane)
throw Base::TypeError("No planar face in SketchBased::getSupportFace()!");
return face;
}
}
return TopoDS::Face(Feature::makeShapeFromPlane(sketch));
}
TopoDS_Face FaceTypedCylinder::buildFace(const FaceVectorType &faces) const
{
std::vector<EdgeVectorType> boundaries;
boundarySplit(faces, boundaries);
static TopoDS_Face dummy;
if (boundaries.size() < 1)
return dummy;
//take one face and remove all the wires.
TopoDS_Face workFace = faces.at(0);
ShapeBuild_ReShape reshaper;
TopExp_Explorer it;
for (it.Init(workFace, TopAbs_WIRE); it.More(); it.Next())
reshaper.Remove(it.Current());
workFace = TopoDS::Face(reshaper.Apply(workFace));
if (workFace.IsNull())
return TopoDS_Face();
ShapeFix_Face faceFixer(workFace);
//makes wires
std::vector<EdgeVectorType>::iterator boundaryIt;
for (boundaryIt = boundaries.begin(); boundaryIt != boundaries.end(); ++boundaryIt)
{
BRepLib_MakeWire wireMaker;
EdgeVectorType::iterator it;
for (it = (*boundaryIt).begin(); it != (*boundaryIt).end(); ++it)
wireMaker.Add(*it);
if (wireMaker.Error() != BRepLib_WireDone)
continue;
faceFixer.Add(wireMaker.Wire());
}
if (faceFixer.Perform() > ShapeExtend_DONE5)
return TopoDS_Face();
faceFixer.FixOrientation();
if (faceFixer.Perform() > ShapeExtend_DONE5)
return TopoDS_Face();
return faceFixer.Face();
}
const std::list<gp_Trsf> LinearPattern::getTransformations(const std::vector<App::DocumentObject*>)
{
std::string stdDirection = StdDirection.getValue();
float distance = Length.getValue();
if (distance < Precision::Confusion())
throw Base::Exception("Pattern length too small");
int occurrences = Occurrences.getValue();
if (occurrences < 2)
throw Base::Exception("At least two occurrences required");
bool reversed = Reversed.getValue();
gp_Dir dir;
double offset = distance / (occurrences - 1);
if (!stdDirection.empty()) {
// Note: The placement code commented out below had the defect of working always on the
// absolute X,Y,Z direction, not on the relative coordinate system of the Body feature.
// It requires positionBySupport() to be called in Transformed::Execute() AFTER
// the call to getTransformations()
// New code thanks to logari81
if (stdDirection == "X") {
//dir = Base::Axis(Base::Vector3d(0,0,0), Base::Vector3d(1,0,0));
dir = gp_Dir(1,0,0);
} else if (stdDirection == "Y") {
//dir = Base::Axis(Base::Vector3d(0,0,0), Base::Vector3d(0,1,0));
dir = gp_Dir(0,1,0);
} else if(stdDirection == "Z") {
//dir = Base::Axis(Base::Vector3d(0,0,0), Base::Vector3d(0,0,1));
dir = gp_Dir(0,0,1);
} else {
throw Base::Exception("Invalid direction (must be X, Y or Z)");
}
} else {
App::DocumentObject* refObject = Direction.getValue();
if (refObject == NULL)
throw Base::Exception("No direction specified");
if (!refObject->getTypeId().isDerivedFrom(Part::Feature::getClassTypeId()))
throw Base::Exception("Direction reference must be edge or face of a feature");
std::vector<std::string> subStrings = Direction.getSubValues();
if (subStrings.empty() || subStrings[0].empty())
throw Base::Exception("No direction reference specified");
Part::Feature* refFeature = static_cast<Part::Feature*>(refObject);
Part::TopoShape refShape = refFeature->Shape.getShape();
TopoDS_Shape ref = refShape.getSubShape(subStrings[0].c_str());
if (ref.ShapeType() == TopAbs_FACE) {
TopoDS_Face refFace = TopoDS::Face(ref);
if (refFace.IsNull())
throw Base::Exception("Failed to extract direction plane");
BRepAdaptor_Surface adapt(refFace);
if (adapt.GetType() != GeomAbs_Plane)
throw Base::Exception("Direction face must be planar");
dir = adapt.Plane().Axis().Direction();
//gp_Dir d = adapt.Plane().Axis().Direction();
//dir = Base::Axis(Base::Vector3d(0,0,0), Base::Vector3d(d.X(), d.Y(), d.Z()));
} else if (ref.ShapeType() == TopAbs_EDGE) {
TopoDS_Edge refEdge = TopoDS::Edge(ref);
if (refEdge.IsNull())
throw Base::Exception("Failed to extract direction edge");
BRepAdaptor_Curve adapt(refEdge);
if (adapt.GetType() != GeomAbs_Line)
throw Base::Exception("Direction edge must be a straight line");
//gp_Dir d = adapt.Line().Direction();
//dir = Base::Axis(Base::Vector3d(0,0,0), Base::Vector3d(d.X(), d.Y(), d.Z()));
dir = adapt.Line().Direction();
} else {
throw Base::Exception("Direction reference must be edge or face");
}
TopLoc_Location invObjLoc = this->getLocation().Inverted();
dir.Transform(invObjLoc.Transformation());
}
// get the support placement
// TODO: Check for NULL pointer
/*Part::Feature* supportFeature = static_cast<Part::Feature*>(originals.front());
if (supportFeature == NULL)
throw Base::Exception("Cannot work on invalid support shape");
Base::Placement supportPlacement = supportFeature->Placement.getValue();
dir *= supportPlacement;
gp_Vec direction(dir.getDirection().x, dir.getDirection().y, dir.getDirection().z);*/
gp_Vec direction(dir.X(), dir.Y(), dir.Z());
if (reversed)
direction.Reverse();
// Note: The original feature is NOT included in the list of transformations! Therefore
// we start with occurrence number 1, not number 0
std::list<gp_Trsf> transformations;
gp_Trsf trans;
transformations.push_back(trans); // identity transformation
for (int i = 1; i < occurrences; i++) {
trans.SetTranslation(direction * i * offset);
transformations.push_back(trans);
}
return transformations;
}
//=============================================================================
bool NETGENPlugin_Mesher::Compute()
{
#ifdef WNT
netgen::MeshingParameters& mparams = netgen::GlobalMeshingParameters();
#else
netgen::MeshingParameters& mparams = netgen::mparam;
#endif
MESSAGE("Compute with:\n"
" max size = " << mparams.maxh << "\n"
" segments per edge = " << mparams.segmentsperedge);
MESSAGE("\n"
" growth rate = " << mparams.grading << "\n"
" elements per radius = " << mparams.curvaturesafety << "\n"
" second order = " << mparams.secondorder << "\n"
" quad allowed = " << mparams.quad);
SMESH_ComputeErrorPtr error = SMESH_ComputeError::New();
nglib::Ng_Init();
// -------------------------
// Prepare OCC geometry
// -------------------------
netgen::OCCGeometry occgeo;
list< SMESH_subMesh* > meshedSM;
PrepareOCCgeometry( occgeo, _shape, *_mesh, &meshedSM );
// -------------------------
// Generate the mesh
// -------------------------
netgen::Mesh *ngMesh = NULL;
SMESH_Comment comment;
int err = 0;
int nbInitNod = 0;
int nbInitSeg = 0;
int nbInitFac = 0;
// vector of nodes in which node index == netgen ID
vector< SMDS_MeshNode* > nodeVec;
try
{
// ----------------
// compute 1D mesh
// ----------------
// pass 1D simple parameters to NETGEN
if ( _simpleHyp ) {
if ( int nbSeg = _simpleHyp->GetNumberOfSegments() ) {
// nb of segments
mparams.segmentsperedge = nbSeg + 0.1;
mparams.maxh = occgeo.boundingbox.Diam();
mparams.grading = 0.01;
}
else {
// segment length
mparams.segmentsperedge = 1;
mparams.maxh = _simpleHyp->GetLocalLength();
}
}
// let netgen create ngMesh and calculate element size on not meshed shapes
char *optstr = 0;
int startWith = netgen::MESHCONST_ANALYSE;
int endWith = netgen::MESHCONST_ANALYSE;
err = netgen::OCCGenerateMesh(occgeo, ngMesh, startWith, endWith, optstr);
if (err) comment << "Error in netgen::OCCGenerateMesh() at MESHCONST_ANALYSE step";
// fill ngMesh with nodes and elements of computed submeshes
err = ! fillNgMesh(occgeo, *ngMesh, nodeVec, meshedSM);
nbInitNod = ngMesh->GetNP();
nbInitSeg = ngMesh->GetNSeg();
nbInitFac = ngMesh->GetNSE();
// compute mesh
if (!err)
{
startWith = endWith = netgen::MESHCONST_MESHEDGES;
err = netgen::OCCGenerateMesh(occgeo, ngMesh, startWith, endWith, optstr);
if (err) comment << "Error in netgen::OCCGenerateMesh() at 1D mesh generation";
}
// ---------------------
// compute surface mesh
// ---------------------
if (!err)
{
// pass 2D simple parameters to NETGEN
if ( _simpleHyp ) {
if ( double area = _simpleHyp->GetMaxElementArea() ) {
// face area
mparams.maxh = sqrt(2. * area/sqrt(3.0));
mparams.grading = 0.4; // moderate size growth
}
else {
// length from edges
double length = 0;
TopTools_MapOfShape tmpMap;
for ( TopExp_Explorer exp( _shape, TopAbs_EDGE ); exp.More(); exp.Next() )
if( tmpMap.Add(exp.Current()) )
length += SMESH_Algo::EdgeLength( TopoDS::Edge( exp.Current() ));
if ( ngMesh->GetNSeg() ) {
// we have to multiply length by 2 since for each TopoDS_Edge there
// are double set of NETGEN edges or, in other words, we have to
// divide ngMesh->GetNSeg() on 2.
mparams.maxh = 2*length / ngMesh->GetNSeg();
}
else
mparams.maxh = 1000;
mparams.grading = 0.2; // slow size growth
}
mparams.maxh = min( mparams.maxh, occgeo.boundingbox.Diam()/2 );
ngMesh->SetGlobalH (mparams.maxh);
netgen::Box<3> bb = occgeo.GetBoundingBox();
bb.Increase (bb.Diam()/20);
ngMesh->SetLocalH (bb.PMin(), bb.PMax(), mparams.grading);
}
// let netgen compute 2D mesh
startWith = netgen::MESHCONST_MESHSURFACE;
endWith = _optimize ? netgen::MESHCONST_OPTSURFACE : netgen::MESHCONST_MESHSURFACE;
err = netgen::OCCGenerateMesh(occgeo, ngMesh, startWith, endWith, optstr);
if (err) comment << "Error in netgen::OCCGenerateMesh() at surface mesh generation";
}
// ---------------------
// generate volume mesh
// ---------------------
if (!err && _isVolume)
{
// add ng face descriptors of meshed faces
std::map< int, std::pair<int,int> >::iterator fId_soIds = _faceDescriptors.begin();
for ( ; fId_soIds != _faceDescriptors.end(); ++fId_soIds ) {
int faceID = fId_soIds->first;
int solidID1 = fId_soIds->second.first;
int solidID2 = fId_soIds->second.second;
ngMesh->AddFaceDescriptor (netgen::FaceDescriptor(faceID, solidID1, solidID2, 0));
}
// pass 3D simple parameters to NETGEN
const NETGENPlugin_SimpleHypothesis_3D* simple3d =
dynamic_cast< const NETGENPlugin_SimpleHypothesis_3D* > ( _simpleHyp );
if ( simple3d ) {
if ( double vol = simple3d->GetMaxElementVolume() ) {
// max volume
mparams.maxh = pow( 72, 1/6. ) * pow( vol, 1/3. );
mparams.maxh = min( mparams.maxh, occgeo.boundingbox.Diam()/2 );
}
else {
// length from faces
mparams.maxh = ngMesh->AverageH();
}
// netgen::ARRAY<double> maxhdom;
// maxhdom.SetSize (occgeo.NrSolids());
// maxhdom = mparams.maxh;
// ngMesh->SetMaxHDomain (maxhdom);
ngMesh->SetGlobalH (mparams.maxh);
mparams.grading = 0.4;
ngMesh->CalcLocalH();
}
// let netgen compute 3D mesh
startWith = netgen::MESHCONST_MESHVOLUME;
endWith = _optimize ? netgen::MESHCONST_OPTVOLUME : netgen::MESHCONST_MESHVOLUME;
err = netgen::OCCGenerateMesh(occgeo, ngMesh, startWith, endWith, optstr);
if (err) comment << "Error in netgen::OCCGenerateMesh()";
}
if (!err && mparams.secondorder > 0)
{
netgen::OCCRefinementSurfaces ref (occgeo);
ref.MakeSecondOrder (*ngMesh);
}
}
catch (netgen::NgException exc)
{
error->myName = err = COMPERR_ALGO_FAILED;
comment << exc.What();
}
int nbNod = ngMesh->GetNP();
int nbSeg = ngMesh->GetNSeg();
int nbFac = ngMesh->GetNSE();
int nbVol = ngMesh->GetNE();
MESSAGE((err ? "Mesh Generation failure" : "End of Mesh Generation") <<
", nb nodes: " << nbNod <<
", nb segments: " << nbSeg <<
", nb faces: " << nbFac <<
", nb volumes: " << nbVol);
// -----------------------------------------------------------
// Feed back the SMESHDS with the generated Nodes and Elements
// -----------------------------------------------------------
SMESHDS_Mesh* meshDS = _mesh->GetMeshDS();
bool isOK = ( !err && (_isVolume ? (nbVol > 0) : (nbFac > 0)) );
if ( true /*isOK*/ ) // get whatever built
{
// map of nodes assigned to submeshes
NCollection_Map<int> pindMap;
// create and insert nodes into nodeVec
nodeVec.resize( nbNod + 1 );
int i;
for (i = nbInitNod+1; i <= nbNod /*&& isOK*/; ++i )
{
const netgen::MeshPoint& ngPoint = ngMesh->Point(i);
SMDS_MeshNode* node = NULL;
bool newNodeOnVertex = false;
TopoDS_Vertex aVert;
if (i-nbInitNod <= occgeo.vmap.Extent())
{
// point on vertex
aVert = TopoDS::Vertex(occgeo.vmap(i-nbInitNod));
SMESHDS_SubMesh * submesh = meshDS->MeshElements(aVert);
if (submesh)
{
SMDS_NodeIteratorPtr it = submesh->GetNodes();
if (it->more())
{
node = const_cast<SMDS_MeshNode*> (it->next());
pindMap.Add(i);
}
}
if (!node)
newNodeOnVertex = true;
}
if (!node)
node = meshDS->AddNode(ngPoint.X(), ngPoint.Y(), ngPoint.Z());
if (!node)
{
MESSAGE("Cannot create a mesh node");
if ( !comment.size() ) comment << "Cannot create a mesh node";
nbSeg = nbFac = nbVol = isOK = 0;
break;
}
nodeVec.at(i) = node;
if (newNodeOnVertex)
{
// point on vertex
meshDS->SetNodeOnVertex(node, aVert);
pindMap.Add(i);
}
}
// create mesh segments along geometric edges
NCollection_Map<Link> linkMap;
for (i = nbInitSeg+1; i <= nbSeg/* && isOK*/; ++i )
{
const netgen::Segment& seg = ngMesh->LineSegment(i);
Link link(seg.p1, seg.p2);
if (linkMap.Contains(link))
continue;
linkMap.Add(link);
TopoDS_Edge aEdge;
int pinds[3] = { seg.p1, seg.p2, seg.pmid };
int nbp = 0;
double param2 = 0;
for (int j=0; j < 3; ++j)
{
int pind = pinds[j];
if (pind <= 0) continue;
++nbp;
double param;
if (j < 2)
{
if (aEdge.IsNull())
{
int aGeomEdgeInd = seg.epgeominfo[j].edgenr;
if (aGeomEdgeInd > 0 && aGeomEdgeInd <= occgeo.emap.Extent())
aEdge = TopoDS::Edge(occgeo.emap(aGeomEdgeInd));
}
param = seg.epgeominfo[j].dist;
param2 += param;
}
else
param = param2 * 0.5;
if (pind <= nbInitNod || pindMap.Contains(pind))
continue;
if (!aEdge.IsNull())
{
meshDS->SetNodeOnEdge(nodeVec.at(pind), aEdge, param);
pindMap.Add(pind);
}
}
SMDS_MeshEdge* edge;
if (nbp < 3) // second order ?
edge = meshDS->AddEdge(nodeVec.at(pinds[0]), nodeVec.at(pinds[1]));
else
edge = meshDS->AddEdge(nodeVec.at(pinds[0]), nodeVec.at(pinds[1]),
nodeVec.at(pinds[2]));
if (!edge)
{
if ( !comment.size() ) comment << "Cannot create a mesh edge";
MESSAGE("Cannot create a mesh edge");
nbSeg = nbFac = nbVol = isOK = 0;
break;
}
if (!aEdge.IsNull())
meshDS->SetMeshElementOnShape(edge, aEdge);
}
// create mesh faces along geometric faces
for (i = nbInitFac+1; i <= nbFac/* && isOK*/; ++i )
{
const netgen::Element2d& elem = ngMesh->SurfaceElement(i);
int aGeomFaceInd = elem.GetIndex();
TopoDS_Face aFace;
if (aGeomFaceInd > 0 && aGeomFaceInd <= occgeo.fmap.Extent())
aFace = TopoDS::Face(occgeo.fmap(aGeomFaceInd));
vector<SMDS_MeshNode*> nodes;
for (int j=1; j <= elem.GetNP(); ++j)
{
int pind = elem.PNum(j);
SMDS_MeshNode* node = nodeVec.at(pind);
nodes.push_back(node);
if (pind <= nbInitNod || pindMap.Contains(pind))
continue;
if (!aFace.IsNull())
{
const netgen::PointGeomInfo& pgi = elem.GeomInfoPi(j);
meshDS->SetNodeOnFace(node, aFace, pgi.u, pgi.v);
pindMap.Add(pind);
}
}
SMDS_MeshFace* face = NULL;
switch (elem.GetType())
{
case netgen::TRIG:
face = meshDS->AddFace(nodes[0],nodes[1],nodes[2]);
break;
case netgen::QUAD:
face = meshDS->AddFace(nodes[0],nodes[1],nodes[2],nodes[3]);
break;
case netgen::TRIG6:
face = meshDS->AddFace(nodes[0],nodes[1],nodes[2],nodes[5],nodes[3],nodes[4]);
break;
case netgen::QUAD8:
face = meshDS->AddFace(nodes[0],nodes[1],nodes[2],nodes[3],
nodes[4],nodes[7],nodes[5],nodes[6]);
break;
default:
MESSAGE("NETGEN created a face of unexpected type, ignoring");
continue;
}
if (!face)
{
if ( !comment.size() ) comment << "Cannot create a mesh face";
MESSAGE("Cannot create a mesh face");
nbSeg = nbFac = nbVol = isOK = 0;
break;
}
if (!aFace.IsNull())
meshDS->SetMeshElementOnShape(face, aFace);
}
// create tetrahedra
for (i = 1; i <= nbVol/* && isOK*/; ++i)
{
const netgen::Element& elem = ngMesh->VolumeElement(i);
int aSolidInd = elem.GetIndex();
TopoDS_Solid aSolid;
if (aSolidInd > 0 && aSolidInd <= occgeo.somap.Extent())
aSolid = TopoDS::Solid(occgeo.somap(aSolidInd));
vector<SMDS_MeshNode*> nodes;
for (int j=1; j <= elem.GetNP(); ++j)
{
int pind = elem.PNum(j);
SMDS_MeshNode* node = nodeVec.at(pind);
nodes.push_back(node);
if (pind <= nbInitNod || pindMap.Contains(pind))
continue;
if (!aSolid.IsNull())
{
// point in solid
meshDS->SetNodeInVolume(node, aSolid);
pindMap.Add(pind);
}
}
SMDS_MeshVolume* vol = NULL;
switch (elem.GetType())
{
case netgen::TET:
vol = meshDS->AddVolume(nodes[0],nodes[1],nodes[2],nodes[3]);
break;
case netgen::TET10:
vol = meshDS->AddVolume(nodes[0],nodes[1],nodes[2],nodes[3],
nodes[4],nodes[7],nodes[5],nodes[6],nodes[8],nodes[9]);
break;
default:
MESSAGE("NETGEN created a volume of unexpected type, ignoring");
continue;
}
if (!vol)
{
if ( !comment.size() ) comment << "Cannot create a mesh volume";
MESSAGE("Cannot create a mesh volume");
nbSeg = nbFac = nbVol = isOK = 0;
break;
}
if (!aSolid.IsNull())
meshDS->SetMeshElementOnShape(vol, aSolid);
}
}
if ( error->IsOK() && ( !isOK || comment.size() > 0 ))
error->myName = COMPERR_ALGO_FAILED;
if ( !comment.empty() )
error->myComment = comment;
// set bad compute error to subshapes of all failed subshapes shapes
if ( !error->IsOK() && err )
{
for (int i = 1; i <= occgeo.fmap.Extent(); i++) {
int status = occgeo.facemeshstatus[i-1];
if (status == 1 ) continue;
if ( SMESH_subMesh* sm = _mesh->GetSubMeshContaining( occgeo.fmap( i ))) {
SMESH_ComputeErrorPtr& smError = sm->GetComputeError();
if ( !smError || smError->IsOK() ) {
if ( status == -1 )
smError.reset( new SMESH_ComputeError( error->myName, error->myComment ));
else
smError.reset( new SMESH_ComputeError( COMPERR_ALGO_FAILED, "Ignored" ));
}
}
}
}
nglib::Ng_DeleteMesh((nglib::Ng_Mesh*)ngMesh);
nglib::Ng_Exit();
RemoveTmpFiles();
return error->IsOK();
}
void ShapeGeometryBuilder::edgeConstruct(const TopoDS_Edge &edgeIn)
{
TopoDS_Face face = TopoDS::Face(edgeToFace.FindFromKey(edgeIn).First());
if (face.IsNull())
throw std::runtime_error("face is null in edge construction");
TopLoc_Location location;
Handle(Poly_Triangulation) triangulation;
triangulation = BRep_Tool::Triangulation(face, location);
const Handle(Poly_PolygonOnTriangulation) &segments =
BRep_Tool::PolygonOnTriangulation(edgeIn, triangulation, location);
if (segments.IsNull())
throw std::runtime_error("edge triangulation is null in edge construction");
gp_Trsf transformation;
bool identity = true;
if(!location.IsIdentity())
{
identity = false;
transformation = location.Transformation();
}
const TColStd_Array1OfInteger& indexes = segments->Nodes();
const TColgp_Array1OfPnt& nodes = triangulation->Nodes();
osg::Vec3Array *vertices = dynamic_cast<osg::Vec3Array *>(edgeGeometry->getVertexArray());
osg::Vec4Array *colors = dynamic_cast<osg::Vec4Array *>(edgeGeometry->getColorArray());
osg::ref_ptr<osg::DrawElementsUInt> indices = new osg::DrawElementsUInt
(GL_LINE_STRIP, indexes.Length());
osg::BoundingSphere bSphere;
for (int index(indexes.Lower()); index < indexes.Upper() + 1; ++index)
{
gp_Pnt point = nodes(indexes(index));
if(!identity)
point.Transform(transformation);
vertices->push_back(osg::Vec3(point.X(), point.Y(), point.Z()));
colors->push_back(edgeGeometry->getColor());
(*indices)[index - 1] = vertices->size() - 1;
if (!bSphere.valid()) //for first one.
{
bSphere.center() = vertices->back();
bSphere.radius() = 0.0;
}
else
bSphere.expandBy(vertices->back());
}
edgeGeometry->addPrimitiveSet(indices.get());
boost::uuids::uuid id = seerShape->findShapeIdRecord(edgeIn).id;
std::size_t lastPrimitiveIndex = edgeGeometry->getNumPrimitiveSets() - 1;
if (!idPSetWrapperEdge->hasId(id))
{
IdPSetRecord record;
record.id = id;
record.primitiveSetIndex = lastPrimitiveIndex;
record.bSphere = bSphere;
idPSetWrapperEdge->idPSetContainer.insert(record);
}
else
//ensure that edges have the same primitive index between lod calls.
//asserts here prior to having lod implemented is probably duplicate ids
//for different geometry.
assert(lastPrimitiveIndex == idPSetWrapperEdge->findPSetFromId(id));
}
App::DocumentObjectExecReturn *DrawViewSection::execute(void)
{
App::DocumentObject* link = Source.getValue();
App::DocumentObject* base = BaseView.getValue();
if (!link || !base) {
Base::Console().Log("INFO - DVS::execute - No Source or Link - creation?\n");
return DrawView::execute();
}
if (!link->getTypeId().isDerivedFrom(Part::Feature::getClassTypeId()))
return new App::DocumentObjectExecReturn("Source object is not a Part object");
if (!base->getTypeId().isDerivedFrom(TechDraw::DrawViewPart::getClassTypeId()))
return new App::DocumentObjectExecReturn("BaseView object is not a DrawViewPart object");
//Base::Console().Message("TRACE - DVS::execute() - %s/%s\n",getNameInDocument(),Label.getValue());
const Part::TopoShape &partTopo = static_cast<Part::Feature*>(link)->Shape.getShape();
if (partTopo.getShape().IsNull())
return new App::DocumentObjectExecReturn("Linked shape object is empty");
(void) DrawView::execute(); //make sure Scale is up to date
gp_Pln pln = getSectionPlane();
gp_Dir gpNormal = pln.Axis().Direction();
Base::Vector3d orgPnt = SectionOrigin.getValue();
Base::BoundBox3d bb = partTopo.getBoundBox();
if(!isReallyInBox(orgPnt, bb)) {
Base::Console().Warning("DVS: Section Plane doesn't intersect part in %s\n",getNameInDocument());
Base::Console().Warning("DVS: Using center of bounding box.\n");
orgPnt = bb.GetCenter();
SectionOrigin.setValue(orgPnt);
}
// Make the extrusion face
double dMax = bb.CalcDiagonalLength();
BRepBuilderAPI_MakeFace mkFace(pln, -dMax,dMax,-dMax,dMax);
TopoDS_Face aProjFace = mkFace.Face();
if(aProjFace.IsNull())
return new App::DocumentObjectExecReturn("DrawViewSection - Projected face is NULL");
gp_Vec extrudeDir = dMax * gp_Vec(gpNormal);
TopoDS_Shape prism = BRepPrimAPI_MakePrism(aProjFace, extrudeDir, false, true).Shape();
// We need to copy the shape to not modify the BRepstructure
BRepBuilderAPI_Copy BuilderCopy(partTopo.getShape());
TopoDS_Shape myShape = BuilderCopy.Shape();
BRepAlgoAPI_Cut mkCut(myShape, prism);
if (!mkCut.IsDone())
return new App::DocumentObjectExecReturn("Section cut has failed");
TopoDS_Shape rawShape = mkCut.Shape();
Bnd_Box testBox;
BRepBndLib::Add(rawShape, testBox);
testBox.SetGap(0.0);
if (testBox.IsVoid()) { //prism & input don't intersect. rawShape is garbage, don't bother.
Base::Console().Log("INFO - DVS::execute - prism & input don't intersect\n");
return DrawView::execute();
}
gp_Pnt inputCenter;
try {
inputCenter = TechDrawGeometry::findCentroid(rawShape,
Direction.getValue());
TopoDS_Shape mirroredShape = TechDrawGeometry::mirrorShape(rawShape,
inputCenter,
Scale.getValue());
geometryObject = buildGeometryObject(mirroredShape,inputCenter); //this is original shape after cut by section prism
#if MOD_TECHDRAW_HANDLE_FACES
extractFaces();
#endif //#if MOD_TECHDRAW_HANDLE_FACES
}
catch (Standard_Failure) {
Handle_Standard_Failure e1 = Standard_Failure::Caught();
Base::Console().Log("LOG - DVS::execute - base shape failed for %s - %s **\n",getNameInDocument(),e1->GetMessageString());
return new App::DocumentObjectExecReturn(e1->GetMessageString());
}
try {
TopoDS_Compound sectionCompound = findSectionPlaneIntersections(rawShape);
TopoDS_Shape mirroredSection = TechDrawGeometry::mirrorShape(sectionCompound,
inputCenter,
Scale.getValue());
TopoDS_Compound newFaces;
BRep_Builder builder;
builder.MakeCompound(newFaces);
TopExp_Explorer expl(mirroredSection, TopAbs_FACE);
for (; expl.More(); expl.Next()) {
const TopoDS_Face& face = TopoDS::Face(expl.Current());
TopoDS_Face pFace = projectFace(face,
inputCenter,
Direction.getValue());
if (!pFace.IsNull()) {
builder.Add(newFaces,pFace);
}
}
sectionFaces = newFaces;
}
catch (Standard_Failure) {
Handle_Standard_Failure e2 = Standard_Failure::Caught();
Base::Console().Log("LOG - DVS::execute - failed building section faces for %s - %s **\n",getNameInDocument(),e2->GetMessageString());
return new App::DocumentObjectExecReturn(e2->GetMessageString());
}
return App::DocumentObject::StdReturn;
}
bool FaceUniter::process()
{
if (workShell.IsNull())
return false;
modifiedShapes.clear();
deletedShapes.clear();
typeObjects.push_back(&getPlaneObject());
typeObjects.push_back(&getCylinderObject());
//add more face types.
ModelRefine::FaceTypeSplitter splitter;
splitter.addShell(workShell);
std::vector<FaceTypedBase *>::iterator typeIt;
for(typeIt = typeObjects.begin(); typeIt != typeObjects.end(); ++typeIt)
splitter.registerType((*typeIt)->getType());
splitter.split();
ModelRefine::FaceVectorType facesToRemove;
ModelRefine::FaceVectorType facesToSew;
ModelRefine::FaceAdjacencySplitter adjacencySplitter(workShell);
for(typeIt = typeObjects.begin(); typeIt != typeObjects.end(); ++typeIt)
{
ModelRefine::FaceVectorType typedFaces = splitter.getTypedFaceVector((*typeIt)->getType());
ModelRefine::FaceEqualitySplitter equalitySplitter;
equalitySplitter.split(typedFaces, *typeIt);
for (std::size_t indexEquality(0); indexEquality < equalitySplitter.getGroupCount(); ++indexEquality)
{
adjacencySplitter.split(equalitySplitter.getGroup(indexEquality));
// std::cout << " adjacency group count: " << adjacencySplitter.getGroupCount() << std::endl;
for (std::size_t adjacentIndex(0); adjacentIndex < adjacencySplitter.getGroupCount(); ++adjacentIndex)
{
// std::cout << " face count is: " << adjacencySplitter.getGroup(adjacentIndex).size() << std::endl;
TopoDS_Face newFace = (*typeIt)->buildFace(adjacencySplitter.getGroup(adjacentIndex));
if (!newFace.IsNull())
{
facesToSew.push_back(newFace);
if (facesToRemove.capacity() <= facesToRemove.size() + adjacencySplitter.getGroup(adjacentIndex).size())
facesToRemove.reserve(facesToRemove.size() + adjacencySplitter.getGroup(adjacentIndex).size());
FaceVectorType temp = adjacencySplitter.getGroup(adjacentIndex);
facesToRemove.insert(facesToRemove.end(), temp.begin(), temp.end());
// the first shape will be marked as modified, i.e. replaced by newFace, all others are marked as deleted
if (!temp.empty())
{
modifiedShapes.push_back(std::make_pair(temp.front(), newFace));
deletedShapes.insert(deletedShapes.end(), temp.begin()+1, temp.end());
}
}
}
}
}
if (facesToSew.size() > 0)
{
modifiedSignal = true;
workShell = ModelRefine::removeFaces(workShell, facesToRemove);
TopExp_Explorer xp;
bool emptyShell = true;
for (xp.Init(workShell, TopAbs_FACE); xp.More(); xp.Next())
{
emptyShell = false;
break;
}
if (!emptyShell || facesToSew.size() > 1)
{
BRepBuilderAPI_Sewing sew;
sew.Add(workShell);
FaceVectorType::iterator sewIt;
for(sewIt = facesToSew.begin(); sewIt != facesToSew.end(); ++sewIt)
sew.Add(*sewIt);
sew.Perform();
workShell = TopoDS::Shell(sew.SewedShape());
// update the list of modifications
for (std::vector<ShapePairType>::iterator it = modifiedShapes.begin(); it != modifiedShapes.end(); ++it)
{
if (sew.IsModified(it->second))
{
it->second = sew.Modified(it->second);
break;
}
}
}
else
{
// workShell has no more faces and we add exactly one face
BRep_Builder builder;
builder.MakeShell(workShell);
FaceVectorType::iterator sewIt;
for(sewIt = facesToSew.begin(); sewIt != facesToSew.end(); ++sewIt)
builder.Add(workShell, *sewIt);
}
BRepLib_FuseEdges edgeFuse(workShell, Standard_True);
TopTools_DataMapOfShapeShape affectedFaces;
edgeFuse.Faces(affectedFaces);
TopTools_DataMapIteratorOfDataMapOfShapeShape mapIt;
for (mapIt.Initialize(affectedFaces); mapIt.More(); mapIt.Next())
{
ShapeFix_Face faceFixer(TopoDS::Face(mapIt.Value()));
faceFixer.Perform();
}
workShell = TopoDS::Shell(edgeFuse.Shape());
// update the list of modifications
TopTools_DataMapOfShapeShape faceMap;
edgeFuse.Faces(faceMap);
for (std::vector<ShapePairType>::iterator it = modifiedShapes.begin(); it != modifiedShapes.end(); ++it)
{
if (faceMap.IsBound(it->second))
{
const TopoDS_Shape& value = faceMap.Find(it->second);
if (!value.IsSame(it->second))
it->second = value;
}
}
}
return true;
}
App::DocumentObjectExecReturn *Pocket::execute(void)
{
// Handle legacy features, these typically have Type set to 3 (previously NULL, now UpToFace),
// empty FaceName (because it didn't exist) and a value for Length
if (std::string(Type.getValueAsString()) == "UpToFace" &&
(UpToFace.getValue() == NULL && Length.getValue() > Precision::Confusion()))
Type.setValue("Length");
// Validate parameters
double L = Length.getValue();
if ((std::string(Type.getValueAsString()) == "Length") && (L < Precision::Confusion()))
return new App::DocumentObjectExecReturn("Pocket: Length of pocket too small");
Part::Feature* obj = 0;
TopoDS_Face face;
try {
obj = getVerifiedObject();
face = getVerifiedFace();
} catch (const Base::Exception& e) {
return new App::DocumentObjectExecReturn(e.what());
}
// if the Base property has a valid shape, fuse the prism into it
TopoDS_Shape base;
try {
base = getBaseShape();
} catch (const Base::Exception&) {
return new App::DocumentObjectExecReturn("No sketch support and no base shape: Please tell me where to remove the material of the pocket!");
}
// get the Sketch plane
Base::Placement SketchPos = obj->Placement.getValue();
Base::Vector3d SketchVector = getProfileNormal();
// turn around for pockets
SketchVector *= -1;
try {
this->positionByPrevious();
TopLoc_Location invObjLoc = this->getLocation().Inverted();
base.Move(invObjLoc);
gp_Dir dir(SketchVector.x,SketchVector.y,SketchVector.z);
dir.Transform(invObjLoc.Transformation());
if (face.IsNull())
return new App::DocumentObjectExecReturn("Pocket: Creating a face from sketch failed");
face.Move(invObjLoc);
std::string method(Type.getValueAsString());
if (method == "UpToFirst" || method == "UpToFace") {
if (base.IsNull())
return new App::DocumentObjectExecReturn("Pocket: Extruding up to a face is only possible if the sketch is located on a face");
// Note: This will return an unlimited planar face if support is a datum plane
TopoDS_Face supportface = getSupportFace();
supportface.Move(invObjLoc);
if (Reversed.getValue())
dir.Reverse();
// Find a valid face or datum plane to extrude up to
TopoDS_Face upToFace;
if (method == "UpToFace") {
getUpToFaceFromLinkSub(upToFace, UpToFace);
upToFace.Move(invObjLoc);
}
getUpToFace(upToFace, base, supportface, face, method, dir, Offset.getValue());
// BRepFeat_MakePrism(..., 2, 1) in combination with PerForm(upToFace) is buggy when the
// prism that is being created is contained completely inside the base solid
// In this case the resulting shape is empty. This is not a problem for the Pad or Pocket itself
// but it leads to an invalid SubShape
// The bug only occurs when the upToFace is limited (by a wire), not for unlimited upToFace. But
// other problems occur with unlimited concave upToFace so it is not an option to always unlimit upToFace
// Check supportface for limits, otherwise Perform() throws an exception
TopExp_Explorer Ex(supportface,TopAbs_WIRE);
if (!Ex.More())
supportface = TopoDS_Face();
BRepFeat_MakePrism PrismMaker;
PrismMaker.Init(base, face, supportface, dir, 0, 1);
PrismMaker.Perform(upToFace);
if (!PrismMaker.IsDone())
return new App::DocumentObjectExecReturn("Pocket: Up to face: Could not extrude the sketch!");
TopoDS_Shape prism = PrismMaker.Shape();
// And the really expensive way to get the SubShape...
BRepAlgoAPI_Cut mkCut(base, prism);
if (!mkCut.IsDone())
return new App::DocumentObjectExecReturn("Pocket: Up to face: Could not get SubShape!");
// FIXME: In some cases this affects the Shape property: It is set to the same shape as the SubShape!!!!
TopoDS_Shape result = refineShapeIfActive(mkCut.Shape());
this->AddSubShape.setValue(result);
this->Shape.setValue(prism);
} else {
TopoDS_Shape prism;
generatePrism(prism, face, method, dir, L, 0.0,
Midplane.getValue(), Reversed.getValue());
if (prism.IsNull())
return new App::DocumentObjectExecReturn("Pocket: Resulting shape is empty");
// set the subtractive shape property for later usage in e.g. pattern
prism = refineShapeIfActive(prism);
this->AddSubShape.setValue(prism);
// Cut the SubShape out of the base feature
BRepAlgoAPI_Cut mkCut(base, prism);
if (!mkCut.IsDone())
return new App::DocumentObjectExecReturn("Pocket: Cut out of base feature failed");
TopoDS_Shape result = mkCut.Shape();
// we have to get the solids (fuse sometimes creates compounds)
TopoDS_Shape solRes = this->getSolid(result);
if (solRes.IsNull())
return new App::DocumentObjectExecReturn("Pocket: Resulting shape is not a solid");
solRes = refineShapeIfActive(solRes);
remapSupportShape(solRes);
this->Shape.setValue(solRes);
}
return App::DocumentObject::StdReturn;
}
catch (Standard_Failure) {
Handle_Standard_Failure e = Standard_Failure::Caught();
if (std::string(e->GetMessageString()) == "TopoDS::Face" &&
(std::string(Type.getValueAsString()) == "UpToFirst" || std::string(Type.getValueAsString()) == "UpToFace"))
return new App::DocumentObjectExecReturn("Could not create face from sketch.\n"
"Intersecting sketch entities or multiple faces in a sketch are not allowed "
"for making a pocket up to a face.");
else
return new App::DocumentObjectExecReturn(e->GetMessageString());
}
catch (Base::Exception& e) {
return new App::DocumentObjectExecReturn(e.what());
}
}
App::DocumentObjectExecReturn *Draft::execute(void)
{
// Get parameters
// Base shape
Part::TopoShape TopShape;
try {
TopShape = getBaseShape();
} catch (Base::Exception& e) {
return new App::DocumentObjectExecReturn(e.what());
}
// Faces where draft should be applied
// Note: Cannot be const reference currently because of BRepOffsetAPI_DraftAngle::Remove() bug, see below
std::vector<std::string> SubVals = Base.getSubValuesStartsWith("Face");
if (SubVals.size() == 0)
return new App::DocumentObjectExecReturn("No faces specified");
// Draft angle
double angle = Angle.getValue() / 180.0 * M_PI;
// Pull direction
gp_Dir pullDirection;
App::DocumentObject* refDirection = PullDirection.getValue();
if (refDirection != NULL) {
if (refDirection->getTypeId().isDerivedFrom(PartDesign::Line::getClassTypeId())) {
PartDesign::Line* line = static_cast<PartDesign::Line*>(refDirection);
Base::Vector3d d = line->getDirection();
pullDirection = gp_Dir(d.x, d.y, d.z);
} else if (refDirection->getTypeId().isDerivedFrom(Part::Feature::getClassTypeId())) {
std::vector<std::string> subStrings = PullDirection.getSubValues();
if (subStrings.empty() || subStrings[0].empty())
throw Base::Exception("No pull direction reference specified");
Part::Feature* refFeature = static_cast<Part::Feature*>(refDirection);
Part::TopoShape refShape = refFeature->Shape.getShape();
TopoDS_Shape ref = refShape.getSubShape(subStrings[0].c_str());
if (ref.ShapeType() == TopAbs_EDGE) {
TopoDS_Edge refEdge = TopoDS::Edge(ref);
if (refEdge.IsNull())
throw Base::Exception("Failed to extract pull direction reference edge");
BRepAdaptor_Curve adapt(refEdge);
if (adapt.GetType() != GeomAbs_Line)
throw Base::Exception("Pull direction reference edge must be linear");
pullDirection = adapt.Line().Direction();
} else {
throw Base::Exception("Pull direction reference must be an edge or a datum line");
}
} else {
throw Base::Exception("Pull direction reference must be an edge of a feature or a datum line");
}
TopLoc_Location invObjLoc = this->getLocation().Inverted();
pullDirection.Transform(invObjLoc.Transformation());
}
// Neutral plane
gp_Pln neutralPlane;
App::DocumentObject* refPlane = NeutralPlane.getValue();
if (refPlane == NULL) {
// Try to guess a neutral plane from the first selected face
// Get edges of first selected face
TopoDS_Shape face = TopShape.getSubShape(SubVals[0].c_str());
TopTools_IndexedMapOfShape mapOfEdges;
TopExp::MapShapes(face, TopAbs_EDGE, mapOfEdges);
bool found = false;
for (int i = 1; i <= mapOfEdges.Extent(); i++) {
// Note: What happens if mapOfEdges(i) is the degenerated edge of a cone?
// But in that case the draft is not possible anyway!
BRepAdaptor_Curve c(TopoDS::Edge(mapOfEdges(i)));
gp_Pnt p1 = c.Value(c.FirstParameter());
gp_Pnt p2 = c.Value(c.LastParameter());
if (c.IsClosed()) {
// Edge is a circle or a circular arc (other types are not allowed for drafting)
neutralPlane = gp_Pln(p1, c.Circle().Axis().Direction());
found = true;
break;
} else {
// Edge is linear
// Find midpoint of edge and create auxiliary plane through midpoint normal to edge
gp_Pnt pm = c.Value((c.FirstParameter() + c.LastParameter()) / 2.0);
Handle(Geom_Plane) aux = new Geom_Plane(pm, gp_Dir(p2.X() - p1.X(), p2.Y() - p1.Y(), p2.Z() - p1.Z()));
// Intersect plane with face. Is there no easier way?
BRepAdaptor_Surface adapt(TopoDS::Face(face), Standard_False);
Handle(Geom_Surface) sf = adapt.Surface().Surface();
GeomAPI_IntSS intersector(aux, sf, Precision::Confusion());
if (!intersector.IsDone())
continue;
Handle(Geom_Curve) icurve = intersector.Line(1);
if (!icurve->IsKind(STANDARD_TYPE(Geom_Line)))
continue;
// TODO: How to extract the line from icurve without creating an edge first?
TopoDS_Edge edge = BRepBuilderAPI_MakeEdge(icurve);
BRepAdaptor_Curve c(edge);
neutralPlane = gp_Pln(pm, c.Line().Direction());
found = true;
break;
}
}
if (!found)
throw Base::Exception("No neutral plane specified and none can be guessed");
} else {
if (refPlane->getTypeId().isDerivedFrom(PartDesign::Plane::getClassTypeId())) {
PartDesign::Plane* plane = static_cast<PartDesign::Plane*>(refPlane);
Base::Vector3d b = plane->getBasePoint();
Base::Vector3d n = plane->getNormal();
neutralPlane = gp_Pln(gp_Pnt(b.x, b.y, b.z), gp_Dir(n.x, n.y, n.z));
} else if (refPlane->getTypeId().isDerivedFrom(App::Plane::getClassTypeId())) {
neutralPlane = Feature::makePlnFromPlane(refPlane);
} else if (refPlane->getTypeId().isDerivedFrom(Part::Feature::getClassTypeId())) {
std::vector<std::string> subStrings = NeutralPlane.getSubValues();
if (subStrings.empty() || subStrings[0].empty())
throw Base::Exception("No neutral plane reference specified");
Part::Feature* refFeature = static_cast<Part::Feature*>(refPlane);
Part::TopoShape refShape = refFeature->Shape.getShape();
TopoDS_Shape ref = refShape.getSubShape(subStrings[0].c_str());
if (ref.ShapeType() == TopAbs_FACE) {
TopoDS_Face refFace = TopoDS::Face(ref);
if (refFace.IsNull())
throw Base::Exception("Failed to extract neutral plane reference face");
BRepAdaptor_Surface adapt(refFace);
if (adapt.GetType() != GeomAbs_Plane)
throw Base::Exception("Neutral plane reference face must be planar");
neutralPlane = adapt.Plane();
} else if (ref.ShapeType() == TopAbs_EDGE) {
if (refDirection != NULL) {
// Create neutral plane through edge normal to pull direction
TopoDS_Edge refEdge = TopoDS::Edge(ref);
if (refEdge.IsNull())
throw Base::Exception("Failed to extract neutral plane reference edge");
BRepAdaptor_Curve c(refEdge);
if (c.GetType() != GeomAbs_Line)
throw Base::Exception("Neutral plane reference edge must be linear");
double a = c.Line().Angle(gp_Lin(c.Value(c.FirstParameter()), pullDirection));
if (std::fabs(a - M_PI_2) > Precision::Confusion())
throw Base::Exception("Neutral plane reference edge must be normal to pull direction");
neutralPlane = gp_Pln(c.Value(c.FirstParameter()), pullDirection);
} else {
throw Base::Exception("Neutral plane reference can only be an edge if pull direction is defined");
}
} else {
throw Base::Exception("Neutral plane reference must be a face");
}
} else {
throw Base::Exception("Neutral plane reference must be face of a feature or a datum plane");
}
TopLoc_Location invObjLoc = this->getLocation().Inverted();
neutralPlane.Transform(invObjLoc.Transformation());
}
if (refDirection == NULL) {
// Choose pull direction normal to neutral plane
pullDirection = neutralPlane.Axis().Direction();
}
// Reversed pull direction
bool reversed = Reversed.getValue();
if (reversed)
angle *= -1.0;
this->positionByBaseFeature();
// create an untransformed copy of the base shape
Part::TopoShape baseShape(TopShape);
baseShape.setTransform(Base::Matrix4D());
try {
BRepOffsetAPI_DraftAngle mkDraft;
// Note:
// LocOpe_SplitDrafts can split a face with a wire and apply draft to both parts
// Not clear though whether the face must have free boundaries
// LocOpe_DPrism can create a stand-alone draft prism. The sketch can only have a single
// wire, though.
// BRepFeat_MakeDPrism requires a support for the operation but will probably support multiple
// wires in the sketch
bool success;
do {
success = true;
mkDraft.Init(baseShape.getShape());
for (std::vector<std::string>::iterator it=SubVals.begin(); it != SubVals.end(); ++it) {
TopoDS_Face face = TopoDS::Face(baseShape.getSubShape(it->c_str()));
// TODO: What is the flag for?
mkDraft.Add(face, pullDirection, angle, neutralPlane);
if (!mkDraft.AddDone()) {
// Note: the function ProblematicShape returns the face on which the error occurred
// Note: mkDraft.Remove() stumbles on a bug in Draft_Modification::Remove() and is
// therefore unusable. See http://forum.freecadweb.org/viewtopic.php?f=10&t=3209&start=10#p25341
// The only solution is to discard mkDraft and start over without the current face
// mkDraft.Remove(face);
Base::Console().Error("Adding face failed on %s. Omitted\n", it->c_str());
success = false;
SubVals.erase(it);
break;
}
}
}
while (!success);
mkDraft.Build();
if (!mkDraft.IsDone())
return new App::DocumentObjectExecReturn("Failed to create draft");
TopoDS_Shape shape = mkDraft.Shape();
if (shape.IsNull())
return new App::DocumentObjectExecReturn("Resulting shape is null");
this->Shape.setValue(getSolid(shape));
return App::DocumentObject::StdReturn;
}
catch (Standard_Failure) {
Handle(Standard_Failure) e = Standard_Failure::Caught();
return new App::DocumentObjectExecReturn(e->GetMessageString());
}
}
bool FaceUniter::process()
{
if (workShell.IsNull())
return false;
modifiedShapes.clear();
deletedShapes.clear();
typeObjects.push_back(&getPlaneObject());
typeObjects.push_back(&getCylinderObject());
//add more face types.
ModelRefine::FaceTypeSplitter splitter;
splitter.addShell(workShell);
std::vector<FaceTypedBase *>::iterator typeIt;
for(typeIt = typeObjects.begin(); typeIt != typeObjects.end(); ++typeIt)
splitter.registerType((*typeIt)->getType());
splitter.split();
ModelRefine::FaceVectorType facesToRemove;
ModelRefine::FaceVectorType facesToSew;
ModelRefine::FaceAdjacencySplitter adjacencySplitter(workShell);
for(typeIt = typeObjects.begin(); typeIt != typeObjects.end(); ++typeIt)
{
ModelRefine::FaceVectorType typedFaces = splitter.getTypedFaceVector((*typeIt)->getType());
ModelRefine::FaceEqualitySplitter equalitySplitter;
equalitySplitter.split(typedFaces, *typeIt);
for (std::size_t indexEquality(0); indexEquality < equalitySplitter.getGroupCount(); ++indexEquality)
{
adjacencySplitter.split(equalitySplitter.getGroup(indexEquality));
// std::cout << " adjacency group count: " << adjacencySplitter.getGroupCount() << std::endl;
for (std::size_t adjacentIndex(0); adjacentIndex < adjacencySplitter.getGroupCount(); ++adjacentIndex)
{
// std::cout << " face count is: " << adjacencySplitter.getGroup(adjacentIndex).size() << std::endl;
TopoDS_Face newFace = (*typeIt)->buildFace(adjacencySplitter.getGroup(adjacentIndex));
if (!newFace.IsNull())
{
facesToSew.push_back(newFace);
if (facesToRemove.capacity() <= facesToRemove.size() + adjacencySplitter.getGroup(adjacentIndex).size())
facesToRemove.reserve(facesToRemove.size() + adjacencySplitter.getGroup(adjacentIndex).size());
FaceVectorType temp = adjacencySplitter.getGroup(adjacentIndex);
facesToRemove.insert(facesToRemove.end(), temp.begin(), temp.end());
// the first shape will be marked as modified, i.e. replaced by newFace, all others are marked as deleted
// jrheinlaender: IMHO this is not correct because references to the deleted faces will be broken, whereas they should
// be replaced by references to the new face. To achieve this all shapes should be marked as
// modified, producing one single new face. This is the inverse behaviour to faces that are split e.g.
// by a boolean cut, where one old shape is marked as modified, producing multiple new shapes
if (!temp.empty())
{
for (FaceVectorType::iterator f = temp.begin(); f != temp.end(); ++f)
modifiedShapes.push_back(std::make_pair(*f, newFace));
}
}
}
}
}
if (facesToSew.size() > 0)
{
modifiedSignal = true;
workShell = ModelRefine::removeFaces(workShell, facesToRemove);
TopExp_Explorer xp;
bool emptyShell = true;
for (xp.Init(workShell, TopAbs_FACE); xp.More(); xp.Next())
{
emptyShell = false;
break;
}
if (!emptyShell || facesToSew.size() > 1)
{
BRepBuilderAPI_Sewing sew;
sew.Add(workShell);
FaceVectorType::iterator sewIt;
for(sewIt = facesToSew.begin(); sewIt != facesToSew.end(); ++sewIt)
sew.Add(*sewIt);
sew.Perform();
try {
workShell = TopoDS::Shell(sew.SewedShape());
} catch (Standard_Failure) {
return false;
}
// update the list of modifications
for (std::vector<ShapePairType>::iterator it = modifiedShapes.begin(); it != modifiedShapes.end(); ++it)
{
if (sew.IsModified(it->second))
{
it->second = sew.Modified(it->second);
break;
}
}
}
else
{
// workShell has no more faces and we add exactly one face
BRep_Builder builder;
builder.MakeShell(workShell);
FaceVectorType::iterator sewIt;
for(sewIt = facesToSew.begin(); sewIt != facesToSew.end(); ++sewIt)
builder.Add(workShell, *sewIt);
}
BRepLib_FuseEdges edgeFuse(workShell);
// TODO: change this version after occ fix. Freecad Mantis 1450
#if OCC_VERSION_HEX <= 0x070000
TopTools_IndexedMapOfShape map;
collectConicEdges(workShell, map);
edgeFuse.AvoidEdges(map);
#endif
TopTools_DataMapOfShapeShape affectedFaces;
edgeFuse.Faces(affectedFaces);
TopTools_DataMapIteratorOfDataMapOfShapeShape mapIt;
for (mapIt.Initialize(affectedFaces); mapIt.More(); mapIt.Next())
{
ShapeFix_Face faceFixer(TopoDS::Face(mapIt.Value()));
faceFixer.Perform();
}
workShell = TopoDS::Shell(edgeFuse.Shape());
// update the list of modifications
TopTools_DataMapOfShapeShape faceMap;
edgeFuse.Faces(faceMap);
for (mapIt.Initialize(faceMap); mapIt.More(); mapIt.Next())
{
bool isModifiedFace = false;
for (std::vector<ShapePairType>::iterator it = modifiedShapes.begin(); it != modifiedShapes.end(); ++it)
{
if (mapIt.Key().IsSame(it->second)) {
// Note: IsEqual() for some reason does not work
it->second = mapIt.Value();
isModifiedFace = true;
}
}
if (!isModifiedFace)
{
// Catch faces that were not united but whose boundary was changed (probably because
// several adjacent faces were united)
// See https://sourceforge.net/apps/mantisbt/free-cad/view.php?id=873
modifiedShapes.push_back(std::make_pair(mapIt.Key(), mapIt.Value()));
}
}
// Handle edges that were fused. See https://sourceforge.net/apps/mantisbt/free-cad/view.php?id=873
TopTools_DataMapOfIntegerListOfShape oldEdges;
TopTools_DataMapOfIntegerShape newEdges;
edgeFuse.Edges(oldEdges);
edgeFuse.ResultEdges(newEdges);
TopTools_DataMapIteratorOfDataMapOfIntegerListOfShape edgeMapIt;
for (edgeMapIt.Initialize(oldEdges); edgeMapIt.More(); edgeMapIt.Next())
{
const TopTools_ListOfShape& edges = edgeMapIt.Value();
int idx = edgeMapIt.Key();
TopTools_ListIteratorOfListOfShape edgeIt;
for (edgeIt.Initialize(edges); edgeIt.More(); edgeIt.Next())
{
modifiedShapes.push_back(std::make_pair(edgeIt.Value(), newEdges(idx)));
}
// TODO: Handle vertices that have disappeared in the fusion of the edges
}
}
return true;
}
void BuildShapeMesh(osg::Geode *geode, const TopoDS_Shape &shape, const osg::Vec4 &color, double deflection)
{
bool bSetNormal = true;
osg::ref_ptr<deprecated_osg::Geometry> triGeom = new deprecated_osg::Geometry();
osg::ref_ptr<osg::Vec3Array> theVertices = new osg::Vec3Array();
osg::ref_ptr<osg::Vec3Array> theNormals = new osg::Vec3Array();
BRepMesh::Mesh(shape, deflection);
TopExp_Explorer faceExplorer;
for (faceExplorer.Init(shape, TopAbs_FACE); faceExplorer.More(); faceExplorer.Next())
{
TopLoc_Location theLocation;
TopoDS_Face theFace = TopoDS::Face(faceExplorer.Current());
if (theFace.IsNull())
continue;
const Handle_Poly_Triangulation &theTriangulation = BRep_Tool::Triangulation(theFace, theLocation);
BRepLProp_SLProps theProp(BRepAdaptor_Surface(theFace), 1, Precision::Confusion());
Standard_Integer nTriangles = theTriangulation->NbTriangles();
for (Standard_Integer i = 1; i <= nTriangles; i++)
{
const Poly_Triangle& theTriangle = theTriangulation->Triangles().Value(i);
gp_Pnt theVertex1 = theTriangulation->Nodes().Value(theTriangle(1));
gp_Pnt theVertex2 = theTriangulation->Nodes().Value(theTriangle(2));
gp_Pnt theVertex3 = theTriangulation->Nodes().Value(theTriangle(3));
const gp_Pnt2d &theUV1 = theTriangulation->UVNodes().Value(theTriangle(1));
const gp_Pnt2d &theUV2 = theTriangulation->UVNodes().Value(theTriangle(2));
const gp_Pnt2d &theUV3 = theTriangulation->UVNodes().Value(theTriangle(3));
theVertex1.Transform(theLocation.Transformation());
theVertex2.Transform(theLocation.Transformation());
theVertex3.Transform(theLocation.Transformation());
// find the normal for the triangle mesh.
gp_Vec V12(theVertex1, theVertex2);
gp_Vec V13(theVertex1, theVertex3);
gp_Vec theNormal = V12 ^ V13;
gp_Vec theNormal1 = theNormal;
gp_Vec theNormal2 = theNormal;
gp_Vec theNormal3 = theNormal;
if (theNormal.Magnitude() > Precision::Confusion())
{
theNormal.Normalize();
theNormal1.Normalize();
theNormal2.Normalize();
theNormal3.Normalize();
}
theProp.SetParameters(theUV1.X(), theUV1.Y());
if (theProp.IsNormalDefined())
{
theNormal1 = theProp.Normal();
}
theProp.SetParameters(theUV2.X(), theUV2.Y());
if (theProp.IsNormalDefined())
{
theNormal2 = theProp.Normal();
}
theProp.SetParameters(theUV3.X(), theUV3.Y());
if (theProp.IsNormalDefined())
{
theNormal3 = theProp.Normal();
}
if (theFace.Orientation() == TopAbs_REVERSED)
{
theNormal.Reverse();
theNormal1.Reverse();
theNormal2.Reverse();
theNormal3.Reverse();
}
theVertices->push_back(osg::Vec3(theVertex1.X(), theVertex1.Y(), theVertex1.Z()));
theVertices->push_back(osg::Vec3(theVertex2.X(), theVertex2.Y(), theVertex2.Z()));
theVertices->push_back(osg::Vec3(theVertex3.X(), theVertex3.Y(), theVertex3.Z()));
if (bSetNormal)
{
theNormals->push_back(osg::Vec3(theNormal1.X(), theNormal1.Y(), theNormal1.Z()));
theNormals->push_back(osg::Vec3(theNormal2.X(), theNormal2.Y(), theNormal2.Z()));
theNormals->push_back(osg::Vec3(theNormal3.X(), theNormal3.Y(), theNormal3.Z()));
}
else
{
theNormals->push_back(osg::Vec3(theNormal.X(), theNormal.Y(), theNormal.Z()));
theNormals->push_back(osg::Vec3(theNormal.X(), theNormal.Y(), theNormal.Z()));
theNormals->push_back(osg::Vec3(theNormal.X(), theNormal.Y(), theNormal.Z()));
}
}
}
triGeom->setVertexArray(theVertices.get());
triGeom->addPrimitiveSet(new osg::DrawArrays(osg::PrimitiveSet::TRIANGLES, 0, theVertices->size()));
triGeom->setNormalArray(theNormals);
triGeom->setNormalBinding(deprecated_osg::Geometry::BIND_PER_VERTEX);
osg::ref_ptr<osg::Vec4Array> colArr = new osg::Vec4Array();
colArr->push_back(color);
triGeom->setColorArray(colArr, osg::Array::BIND_OVERALL);
geode->addDrawable(triGeom);
}
const std::list<gp_Trsf> LinearPattern::getTransformations(const std::vector<App::DocumentObject*>)
{
double distance = Length.getValue();
if (distance < Precision::Confusion())
throw Base::Exception("Pattern length too small");
int occurrences = Occurrences.getValue();
if (occurrences < 2)
throw Base::Exception("At least two occurrences required");
bool reversed = Reversed.getValue();
double offset = distance / (occurrences - 1);
App::DocumentObject* refObject = Direction.getValue();
if (refObject == NULL)
throw Base::Exception("No direction reference specified");
std::vector<std::string> subStrings = Direction.getSubValues();
if (subStrings.empty())
throw Base::Exception("No direction reference specified");
gp_Dir dir;
if (refObject->getTypeId().isDerivedFrom(Part::Part2DObject::getClassTypeId())) {
Part::Part2DObject* refSketch = static_cast<Part::Part2DObject*>(refObject);
Base::Axis axis;
if (subStrings[0] == "H_Axis")
axis = refSketch->getAxis(Part::Part2DObject::H_Axis);
else if (subStrings[0] == "V_Axis")
axis = refSketch->getAxis(Part::Part2DObject::V_Axis);
else if (subStrings[0] == "N_Axis")
axis = refSketch->getAxis(Part::Part2DObject::N_Axis);
else if (subStrings[0].size() > 4 && subStrings[0].substr(0,4) == "Axis") {
int AxId = std::atoi(subStrings[0].substr(4,4000).c_str());
if (AxId >= 0 && AxId < refSketch->getAxisCount())
axis = refSketch->getAxis(AxId);
}
axis *= refSketch->Placement.getValue();
dir = gp_Dir(axis.getDirection().x, axis.getDirection().y, axis.getDirection().z);
} else if (refObject->getTypeId().isDerivedFrom(PartDesign::Plane::getClassTypeId())) {
PartDesign::Plane* plane = static_cast<PartDesign::Plane*>(refObject);
Base::Vector3d d = plane->getNormal();
dir = gp_Dir(d.x, d.y, d.z);
} else if (refObject->getTypeId().isDerivedFrom(PartDesign::Line::getClassTypeId())) {
PartDesign::Line* line = static_cast<PartDesign::Line*>(refObject);
Base::Vector3d d = line->getDirection();
dir = gp_Dir(d.x, d.y, d.z);
} else if (refObject->getTypeId().isDerivedFrom(App::Line::getClassTypeId())) {
App::Line* line = static_cast<App::Line*>(refObject);
Base::Rotation rot = line->Placement.getValue().getRotation();
Base::Vector3d d(1,0,0);
rot.multVec(d, d);
dir = gp_Dir(d.x, d.y, d.z);
} else if (refObject->getTypeId().isDerivedFrom(Part::Feature::getClassTypeId())) {
if (subStrings[0].empty())
throw Base::Exception("No direction reference specified");
Part::Feature* refFeature = static_cast<Part::Feature*>(refObject);
Part::TopoShape refShape = refFeature->Shape.getShape();
TopoDS_Shape ref = refShape.getSubShape(subStrings[0].c_str());
if (ref.ShapeType() == TopAbs_FACE) {
TopoDS_Face refFace = TopoDS::Face(ref);
if (refFace.IsNull())
throw Base::Exception("Failed to extract direction plane");
BRepAdaptor_Surface adapt(refFace);
if (adapt.GetType() != GeomAbs_Plane)
throw Base::Exception("Direction face must be planar");
dir = adapt.Plane().Axis().Direction();
} else if (ref.ShapeType() == TopAbs_EDGE) {
TopoDS_Edge refEdge = TopoDS::Edge(ref);
if (refEdge.IsNull())
throw Base::Exception("Failed to extract direction edge");
BRepAdaptor_Curve adapt(refEdge);
if (adapt.GetType() != GeomAbs_Line)
throw Base::Exception("Direction edge must be a straight line");
dir = adapt.Line().Direction();
} else {
throw Base::Exception("Direction reference must be edge or face");
}
} else {
throw Base::Exception("Direction reference must be edge/face of a feature or a datum line/plane");
}
TopLoc_Location invObjLoc = this->getLocation().Inverted();
dir.Transform(invObjLoc.Transformation());
gp_Vec direction(dir.X(), dir.Y(), dir.Z());
if (reversed)
direction.Reverse();
// Note: The original feature is NOT included in the list of transformations! Therefore
// we start with occurrence number 1, not number 0
std::list<gp_Trsf> transformations;
gp_Trsf trans;
transformations.push_back(trans); // identity transformation
for (int i = 1; i < occurrences; i++) {
trans.SetTranslation(direction * i * offset);
transformations.push_back(trans);
}
return transformations;
}
bool NETGENPlugin_NETGEN_2D_ONLY::Evaluate(SMESH_Mesh& aMesh,
const TopoDS_Shape& aShape,
MapShapeNbElems& aResMap)
{
TopoDS_Face F = TopoDS::Face(aShape);
if(F.IsNull())
return false;
// collect info from edges
int nb0d = 0, nb1d = 0;
bool IsQuadratic = false;
bool IsFirst = true;
double fullLen = 0.0;
TopTools_MapOfShape tmpMap;
for (TopExp_Explorer exp(F, TopAbs_EDGE); exp.More(); exp.Next()) {
TopoDS_Edge E = TopoDS::Edge(exp.Current());
if( tmpMap.Contains(E) )
continue;
tmpMap.Add(E);
SMESH_subMesh *aSubMesh = aMesh.GetSubMesh(exp.Current());
MapShapeNbElemsItr anIt = aResMap.find(aSubMesh);
if( anIt==aResMap.end() ) {
SMESH_subMesh *sm = aMesh.GetSubMesh(F);
SMESH_ComputeErrorPtr& smError = sm->GetComputeError();
smError.reset( new SMESH_ComputeError(COMPERR_ALGO_FAILED,"Submesh can not be evaluated",this));
return false;
}
std::vector<int> aVec = (*anIt).second;
nb0d += aVec[SMDSEntity_Node];
nb1d += Max(aVec[SMDSEntity_Edge],aVec[SMDSEntity_Quad_Edge]);
double aLen = SMESH_Algo::EdgeLength(E);
fullLen += aLen;
if(IsFirst) {
IsQuadratic = (aVec[SMDSEntity_Quad_Edge] > aVec[SMDSEntity_Edge]);
IsFirst = false;
}
}
tmpMap.Clear();
// compute edge length
double ELen = 0;
if (_hypLengthFromEdges || (!_hypLengthFromEdges && !_hypMaxElementArea)) {
if ( nb1d > 0 )
ELen = fullLen / nb1d;
}
if ( _hypMaxElementArea ) {
double maxArea = _hypMaxElementArea->GetMaxArea();
ELen = sqrt(2. * maxArea/sqrt(3.0));
}
GProp_GProps G;
BRepGProp::SurfaceProperties(F,G);
double anArea = G.Mass();
const int hugeNb = numeric_limits<int>::max()/10;
if ( anArea / hugeNb > ELen*ELen )
{
SMESH_subMesh *sm = aMesh.GetSubMesh(F);
SMESH_ComputeErrorPtr& smError = sm->GetComputeError();
smError.reset( new SMESH_ComputeError(COMPERR_ALGO_FAILED,"Submesh can not be evaluated.\nToo small element length",this));
return false;
}
int nbFaces = (int) ( anArea / ( ELen*ELen*sqrt(3.) / 4 ) );
int nbNodes = (int) ( ( nbFaces*3 - (nb1d-1)*2 ) / 6 + 1 );
std::vector<int> aVec(SMDSEntity_Last);
for(int i=SMDSEntity_Node; i<SMDSEntity_Last; i++) aVec[i]=0;
if( IsQuadratic ) {
aVec[SMDSEntity_Node] = nbNodes;
aVec[SMDSEntity_Quad_Triangle] = nbFaces;
}
else {
aVec[SMDSEntity_Node] = nbNodes;
aVec[SMDSEntity_Triangle] = nbFaces;
}
SMESH_subMesh *sm = aMesh.GetSubMesh(F);
aResMap.insert(std::make_pair(sm,aVec));
return true;
}
StdMeshers_FaceSide::StdMeshers_FaceSide(const TopoDS_Face& theFace,
list<TopoDS_Edge>& theEdges,
SMESH_Mesh* theMesh,
const bool theIsForward,
const bool theIgnoreMediumNodes)
{
int nbEdges = theEdges.size();
myEdge.resize( nbEdges );
myC2d.resize( nbEdges );
myFirst.resize( nbEdges );
myLast.resize( nbEdges );
myNormPar.resize( nbEdges );
myLength = 0;
myNbPonits = myNbSegments = 0;
myMesh = theMesh;
myMissingVertexNodes = false;
myIgnoreMediumNodes = theIgnoreMediumNodes;
if ( nbEdges == 0 ) return;
SMESHDS_Mesh* meshDS = theMesh->GetMeshDS();
vector<double> len( nbEdges );
int nbDegen = 0;
list<TopoDS_Edge>::iterator edge = theEdges.begin();
for ( int index = 0; edge != theEdges.end(); ++index, ++edge )
{
int i = theIsForward ? index : nbEdges - index - 1;
len[i] = SMESH_Algo::EdgeLength( *edge );
if ( len[i] < DBL_MIN ) nbDegen++;
myLength += len[i];
myEdge[i] = *edge;
if ( !theIsForward ) myEdge[i].Reverse();
if ( theFace.IsNull() )
BRep_Tool::Range( *edge, myFirst[i], myLast[i] );
else
myC2d[i] = BRep_Tool::CurveOnSurface( *edge, theFace, myFirst[i], myLast[i] );
if ( myEdge[i].Orientation() == TopAbs_REVERSED )
std::swap( myFirst[i], myLast[i] );
if ( SMESHDS_SubMesh* sm = meshDS->MeshElements( *edge )) {
int nbN = sm->NbNodes();
if ( theIgnoreMediumNodes ) {
SMDS_ElemIteratorPtr elemIt = sm->GetElements();
if ( elemIt->more() && elemIt->next()->IsQuadratic() )
nbN -= sm->NbElements();
}
myNbPonits += nbN;
myNbSegments += sm->NbElements();
}
if ( SMESH_Algo::VertexNode( TopExp::FirstVertex( *edge, 1), meshDS ))
myNbPonits += 1; // for the first end
else
myMissingVertexNodes = true;
}
if ( SMESH_Algo::VertexNode( TopExp::LastVertex( theEdges.back(), 1), meshDS ))
myNbPonits++; // for the last end
else
myMissingVertexNodes = true;
if ( nbEdges > 1 && myLength > DBL_MIN ) {
const double degenNormLen = 1.e-5;
double totLength = myLength;
if ( nbDegen )
totLength += myLength * degenNormLen * nbDegen;
double prevNormPar = 0;
for ( int i = 0; i < nbEdges; ++i ) {
if ( len[ i ] < DBL_MIN )
len[ i ] = myLength * degenNormLen;
myNormPar[ i ] = prevNormPar + len[i]/totLength;
prevNormPar = myNormPar[ i ];
}
}
myNormPar[nbEdges-1] = 1.;
//dump();
}
bool SMESH_Algo::IsReversedSubMesh (const TopoDS_Face& theFace,
SMESHDS_Mesh* theMeshDS)
{
if ( theFace.IsNull() || !theMeshDS )
return false;
// find out orientation of a meshed face
int faceID = theMeshDS->ShapeToIndex( theFace );
TopoDS_Shape aMeshedFace = theMeshDS->IndexToShape( faceID );
bool isReversed = ( theFace.Orientation() != aMeshedFace.Orientation() );
const SMESHDS_SubMesh * aSubMeshDSFace = theMeshDS->MeshElements( faceID );
if ( !aSubMeshDSFace )
return isReversed;
// find element with node located on face and get its normal
const SMDS_FacePosition* facePos = 0;
int vertexID = 0;
gp_Pnt nPnt[3];
gp_Vec Ne;
bool normalOK = false;
SMDS_ElemIteratorPtr iteratorElem = aSubMeshDSFace->GetElements();
while ( iteratorElem->more() ) // loop on elements on theFace
{
const SMDS_MeshElement* elem = iteratorElem->next();
if ( elem && elem->NbNodes() > 2 ) {
SMDS_ElemIteratorPtr nodesIt = elem->nodesIterator();
const SMDS_FacePosition* fPos = 0;
int i = 0, vID = 0;
while ( nodesIt->more() ) { // loop on nodes
const SMDS_MeshNode* node
= static_cast<const SMDS_MeshNode *>(nodesIt->next());
if ( i == 3 ) i = 2;
nPnt[ i++ ].SetCoord( node->X(), node->Y(), node->Z() );
// check position
const SMDS_PositionPtr& pos = node->GetPosition();
if ( !pos ) continue;
if ( pos->GetTypeOfPosition() == SMDS_TOP_FACE ) {
fPos = dynamic_cast< const SMDS_FacePosition* >( pos.get() );
}
else if ( pos->GetTypeOfPosition() == SMDS_TOP_VERTEX ) {
vID = pos->GetShapeId();
}
}
if ( fPos || ( !normalOK && vID )) {
// compute normal
gp_Vec v01( nPnt[0], nPnt[1] ), v02( nPnt[0], nPnt[2] );
if ( v01.SquareMagnitude() > RealSmall() &&
v02.SquareMagnitude() > RealSmall() )
{
Ne = v01 ^ v02;
normalOK = ( Ne.SquareMagnitude() > RealSmall() );
}
// we need position on theFace or at least on vertex
if ( normalOK ) {
vertexID = vID;
if ((facePos = fPos))
break;
}
}
}
}
if ( !normalOK )
return isReversed;
// node position on face
double u,v;
if ( facePos ) {
u = facePos->GetUParameter();
v = facePos->GetVParameter();
}
else if ( vertexID ) {
TopoDS_Shape V = theMeshDS->IndexToShape( vertexID );
if ( V.IsNull() || V.ShapeType() != TopAbs_VERTEX )
return isReversed;
gp_Pnt2d uv = BRep_Tool::Parameters( TopoDS::Vertex( V ), theFace );
u = uv.X();
v = uv.Y();
}
else
{
return isReversed;
}
// face normal at node position
TopLoc_Location loc;
Handle(Geom_Surface) surf = BRep_Tool::Surface( theFace, loc );
if ( surf.IsNull() || surf->Continuity() < GeomAbs_C1 ) return isReversed;
gp_Vec d1u, d1v;
surf->D1( u, v, nPnt[0], d1u, d1v );
gp_Vec Nf = (d1u ^ d1v).Transformed( loc );
if ( theFace.Orientation() == TopAbs_REVERSED )
Nf.Reverse();
return Ne * Nf < 0.;
}
App::DocumentObjectExecReturn *DrawViewDetail::execute(void)
{
if (!keepUpdated()) {
return App::DocumentObject::StdReturn;
}
App::DocumentObject* baseObj = BaseView.getValue();
if (!baseObj) {
Base::Console().Log("INFO - DVD::execute - No BaseView - creation?\n");
return DrawView::execute();
}
DrawViewPart* dvp = nullptr;
if (!baseObj->getTypeId().isDerivedFrom(TechDraw::DrawViewPart::getClassTypeId())) {
return new App::DocumentObjectExecReturn("BaseView object is not a DrawViewPart object");
} else {
dvp = static_cast<DrawViewPart*>(baseObj);
}
TopoDS_Shape shape = dvp->getSourceShapeFused();
if (shape.IsNull()) {
return new App::DocumentObjectExecReturn("DVD - Linked shape object is invalid");
}
Base::Vector3d anchor = AnchorPoint.getValue(); //this is a 2D point (in unrotated coords)
Base::Vector3d dirDetail = dvp->Direction.getValue();
double shapeRotate = dvp->Rotation.getValue(); //degrees CW?
if (dvp->isDerivedFrom(TechDraw::DrawProjGroupItem::getClassTypeId())) {
DrawProjGroupItem* dpgi= static_cast<TechDraw::DrawProjGroupItem*>(dvp);
shapeRotate += dpgi->getRotateAngle() * 180.0/M_PI; // to degrees from radians
}
double radius = getFudgeRadius();
double scale = getScale();
BRepBuilderAPI_Copy BuilderCopy(shape);
TopoDS_Shape myShape = BuilderCopy.Shape();
//rotate the copied shape to match orientation of BaseView and center it on origin
gp_Pnt gpCenter = TechDrawGeometry::findCentroid(myShape, //centre of unrotated shape
dirDetail);
Base::Vector3d shapeCenter = Base::Vector3d(gpCenter.X(),gpCenter.Y(),gpCenter.Z());
gp_Ax2 viewAxis = getViewAxis(shapeCenter, dirDetail, false);
myShape = TechDrawGeometry::rotateShape(myShape, //rotate to match Base shape
viewAxis,
-shapeRotate);
myShape = TechDrawGeometry::moveShape(myShape, //centre on origin
-shapeCenter);
gpCenter = TechDrawGeometry::findCentroid(myShape,
dirDetail);
shapeCenter = Base::Vector3d(gpCenter.X(),gpCenter.Y(),gpCenter.Z());
Bnd_Box bbxSource;
bbxSource.SetGap(0.0);
BRepBndLib::Add(myShape, bbxSource);
double diag = sqrt(bbxSource.SquareExtent());
Base::Vector3d extentFar,extentNear;
extentFar = shapeCenter + dirDetail * diag;
extentNear = shapeCenter + dirDetail * diag * -1.0;
anchor = Base::Vector3d(anchor.x,anchor.y, 0.0);
viewAxis = getViewAxis(shapeCenter, dirDetail, false); //change view axis to (0,0,0)
Base::Vector3d offsetCenter3D = DrawUtil::toR3(viewAxis, anchor); //displacement in R3
Base::Vector3d stdZ(0.0,0.0,1.0);
if (DrawUtil::checkParallel(dirDetail,stdZ)) {
extentNear = extentNear + offsetCenter3D;
} else {
extentNear = extentNear - offsetCenter3D;
}
gp_Pnt gpnt(extentNear.x,extentNear.y,extentNear.z);
gp_Dir gdir(dirDetail.x,dirDetail.y,dirDetail.z);
gp_Pln gpln(gpnt,gdir);
double hideToolRadius = radius * 1.0;
BRepBuilderAPI_MakeFace mkFace(gpln, -hideToolRadius,hideToolRadius,-hideToolRadius,hideToolRadius);
TopoDS_Face aProjFace = mkFace.Face();
if(aProjFace.IsNull()) {
return new App::DocumentObjectExecReturn("DrawViewDetail - Projected face is NULL");
}
Base::Vector3d extrudeVec = dirDetail* (extentFar-extentNear).Length();
gp_Vec extrudeDir(extrudeVec.x,extrudeVec.y,extrudeVec.z);
TopoDS_Shape tool = BRepPrimAPI_MakePrism(aProjFace, extrudeDir, false, true).Shape();
BRepAlgoAPI_Common mkCommon(myShape,tool);
if (!mkCommon.IsDone()) {
Base::Console().Log("DVD::execute - mkCommon not done\n");
return new App::DocumentObjectExecReturn("DVD::execute - mkCommon not done");
}
if (mkCommon.Shape().IsNull()) {
Base::Console().Log("DVD::execute - mkCommon.Shape is Null\n");
return new App::DocumentObjectExecReturn("DVD::execute - mkCommon.Shape is Null");
}
//Did we get a solid?
TopExp_Explorer xp;
xp.Init(mkCommon.Shape(),TopAbs_SOLID);
if (!(xp.More() == Standard_True)) {
Base::Console().Warning("DVD::execute - mkCommon.Shape is not a solid!\n");
}
TopoDS_Shape detail = mkCommon.Shape();
Bnd_Box testBox;
testBox.SetGap(0.0);
BRepBndLib::Add(detail, testBox);
if (testBox.IsVoid()) {
Base::Console().Message("DrawViewDetail - detail area contains no geometry\n");
return new App::DocumentObjectExecReturn("DVDetail - detail area contains no geometry");
}
//for debugging show compound instead of common
// BRep_Builder builder;
// TopoDS_Compound Comp;
// builder.MakeCompound(Comp);
// builder.Add(Comp, tool);
// builder.Add(Comp, myShape);
gp_Pnt inputCenter;
try {
inputCenter = TechDrawGeometry::findCentroid(tool,
Direction.getValue());
TopoDS_Shape mirroredShape = TechDrawGeometry::mirrorShape(detail,
inputCenter,
scale);
viewAxis = getViewAxis(Base::Vector3d(inputCenter.X(),inputCenter.Y(),inputCenter.Z()),Direction.getValue());
if (!DrawUtil::fpCompare(Rotation.getValue(),0.0)) {
mirroredShape = TechDrawGeometry::rotateShape(mirroredShape,
viewAxis,
Rotation.getValue()); //degrees cw?
}
geometryObject = buildGeometryObject(mirroredShape,viewAxis);
geometryObject->pruneVertexGeom(Base::Vector3d(0.0,0.0,0.0),Radius.getValue() * scale); //remove vertices beyond clipradius
#if MOD_TECHDRAW_HANDLE_FACES
if (handleFaces()) {
try {
extractFaces();
}
catch (Standard_Failure& e4) {
Base::Console().Log("LOG - DVD::execute - extractFaces failed for %s - %s **\n",getNameInDocument(),e4.GetMessageString());
return new App::DocumentObjectExecReturn(e4.GetMessageString());
}
}
#endif //#if MOD_TECHDRAW_HANDLE_FACES
}
catch (Standard_Failure& e1) {
Base::Console().Message("LOG - DVD::execute - failed to create detail %s - %s **\n",getNameInDocument(),e1.GetMessageString());
return new App::DocumentObjectExecReturn(e1.GetMessageString());
}
requestPaint();
dvp->requestPaint();
return App::DocumentObject::StdReturn;
}