QSize EntityWidget::calculateSize() {
if (!m_pObject) {
return UMLWidget::calculateSize();
}
int width, height;
QFont font = UMLWidget::getFont();
font.setItalic(false);
font.setUnderline(false);
font.setBold(false);
const QFontMetrics fm(font);
const int fontHeight = fm.lineSpacing();
int lines = 1;//always have one line - for name
if ( !m_pObject->getStereotype().isEmpty() ) {
lines++;
}
const int numberOfEntityAttributes = ((UMLEntity*)m_pObject)->entityAttributes();
height = width = 0;
//set the height of the entity
lines += numberOfEntityAttributes;
if (numberOfEntityAttributes == 0) {
height += fontHeight / 2; //no entity literals, so just add a bit of space
}
height += lines * fontHeight;
//now set the width of the concept
//set width to name to start with
// FIXME spaces to get round beastie with font width,
// investigate UMLWidget::getFontMetrics()
width = getFontMetrics(FT_BOLD_ITALIC).boundingRect(' ' + getName() + ' ').width();
const int w = getFontMetrics(FT_BOLD).boundingRect(m_pObject->getStereotype(true)).width();
width = w > width?w:width;
UMLClassifier* classifier = (UMLClassifier*)m_pObject;
UMLClassifierListItemList list = classifier->getFilteredList(Uml::ot_EntityAttribute);
UMLClassifierListItem* listItem = 0;
for (listItem = list.first(); listItem; listItem = list.next()) {
int w = fm.width( listItem->getName() );
width = w > width?w:width;
}
//allow for width margin
width += ENTITY_MARGIN * 2;
return QSize(width, height);
}
void EntityWidget::draw(QPainter& p, int offsetX, int offsetY) {
UMLWidget::setPen(p);
if(UMLWidget::getUseFillColour())
p.setBrush(UMLWidget::getFillColour());
else
p.setBrush(m_pView -> viewport() -> backgroundColor());
const int w = width();
const int h = height();
const QFontMetrics &fm = getFontMetrics(FT_NORMAL);
int fontHeight = fm.lineSpacing();
const QString name = this->getName();
p.drawRect(offsetX, offsetY, w, h);
p.setPen(QPen(Qt::black));
QFont font = UMLWidget::getFont();
font.setBold(true);
p.setFont(font);
int y = 0;
if ( !m_pObject->getStereotype().isEmpty() ) {
p.drawText(offsetX + ENTITY_MARGIN, offsetY,
w - ENTITY_MARGIN * 2,fontHeight,
Qt::AlignCenter, m_pObject->getStereotype(true));
font.setItalic( m_pObject -> getAbstract() );
p.setFont(font);
p.drawText(offsetX + ENTITY_MARGIN, offsetY + fontHeight,
w - ENTITY_MARGIN * 2, fontHeight, Qt::AlignCenter, name);
font.setBold(false);
font.setItalic(false);
p.setFont(font);
y = fontHeight * 2;
} else {
font.setItalic( m_pObject -> getAbstract() );
p.setFont(font);
p.drawText(offsetX + ENTITY_MARGIN, offsetY,
w - ENTITY_MARGIN * 2, fontHeight, Qt::AlignCenter, name);
font.setBold(false);
font.setItalic(false);
p.setFont(font);
y = fontHeight;
}
UMLWidget::setPen(p);
p.drawLine(offsetX, offsetY + y, offsetX + w - 1, offsetY + y);
QFontMetrics fontMetrics(font);
UMLClassifier *classifier = (UMLClassifier*)m_pObject;
UMLClassifierListItem* entityattribute = 0;
UMLClassifierListItemList list = classifier->getFilteredList(Uml::ot_EntityAttribute);
for (entityattribute = list.first(); entityattribute; entityattribute = list.next()) {
QString text = entityattribute->getName();
p.setPen( QPen(Qt::black) );
UMLEntityAttribute* casted = dynamic_cast<UMLEntityAttribute*>( entityattribute );
if( casted && casted->getIndexType() == Uml::Primary )
{
font.setUnderline( true );
p.setFont( font );
font.setUnderline( false );
}
p.drawText(offsetX + ENTITY_MARGIN, offsetY + y,
fontMetrics.width(text), fontHeight, Qt::AlignVCenter, text);
p.setFont( font );
y+=fontHeight;
}
if (m_bSelected) {
drawSelected(&p, offsetX, offsetY);
}
}
void UMLOperationDialog::setupDialog() {
int margin = fontMetrics().height();
QVBoxLayout * topLayout = new QVBoxLayout( plainPage() );
m_pGenGB = new QGroupBox(i18n("General Properties"), plainPage() );
QGridLayout * genLayout = new QGridLayout(m_pGenGB, 3, 4 );
genLayout -> setColStretch(1, 1);
genLayout -> setColStretch(3, 1);
genLayout -> addColSpacing(1, 200);
genLayout -> addColSpacing(3, 200);
genLayout -> setMargin(margin);
genLayout -> setSpacing(10);
Dialog_Utils::makeLabeledEditField( m_pGenGB, genLayout, 0,
m_pNameL, i18n("&Name:"),
m_pNameLE, m_pOperation->getName() );
m_pRtypeL = new QLabel(i18n("&Type:"), m_pGenGB );
genLayout -> addWidget(m_pRtypeL, 0, 2);
m_pRtypeCB = new KComboBox(true, m_pGenGB );
genLayout -> addWidget(m_pRtypeCB, 0, 3);
m_pRtypeL->setBuddy(m_pRtypeCB);
m_pStereoTypeL = new QLabel( i18n("Stereotype name:"), m_pGenGB );
genLayout -> addWidget(m_pStereoTypeL, 1, 0);
m_pStereoTypeCB = new KComboBox(true, m_pGenGB );
genLayout -> addWidget(m_pStereoTypeCB, 1, 1);
m_pAbstractCB = new QCheckBox( i18n("&Abstract operation"), m_pGenGB );
m_pAbstractCB -> setChecked( m_pOperation->getAbstract() );
genLayout -> addWidget( m_pAbstractCB, 2, 0 );
m_pStaticCB = new QCheckBox( i18n("Classifier &scope (\"static\")"), m_pGenGB );
m_pStaticCB -> setChecked( m_pOperation->getStatic() );
genLayout -> addWidget( m_pStaticCB, 2, 1 );
m_pQueryCB = new QCheckBox( i18n("&Query (\"const\")"), m_pGenGB );
m_pQueryCB -> setChecked( m_pOperation->getConst() );
genLayout -> addWidget( m_pQueryCB, 2, 2 );
topLayout -> addWidget( m_pGenGB );
m_pScopeBG = new QButtonGroup(i18n("Visibility"), plainPage() );
QHBoxLayout * scopeLayout = new QHBoxLayout(m_pScopeBG);
scopeLayout -> setMargin(margin);
m_pPublicRB = new QRadioButton(i18n("P&ublic"), m_pScopeBG);
scopeLayout -> addWidget(m_pPublicRB);
m_pPrivateRB = new QRadioButton(i18n("P&rivate"), m_pScopeBG);
scopeLayout -> addWidget(m_pPrivateRB);
m_pProtectedRB = new QRadioButton(i18n("Prot&ected"), m_pScopeBG);
scopeLayout -> addWidget(m_pProtectedRB);
m_pImplementationRB = new QRadioButton(i18n("I&mplementation"), m_pScopeBG);
scopeLayout -> addWidget(m_pImplementationRB);
topLayout -> addWidget(m_pScopeBG);
m_pParmsGB = new QGroupBox(i18n("Parameters"), plainPage() );
QVBoxLayout* parmsLayout = new QVBoxLayout(m_pParmsGB);
parmsLayout->setMargin(margin);
parmsLayout->setSpacing(10);
//horizontal box contains the list box and the move up/down buttons
QHBoxLayout* parmsHBoxLayout = new QHBoxLayout(parmsLayout);
m_pParmsLB = new QListBox(m_pParmsGB);
parmsHBoxLayout->addWidget(m_pParmsLB);
//the move up/down buttons (another vertical box)
QVBoxLayout* buttonLayout = new QVBoxLayout( parmsHBoxLayout );
m_pUpButton = new KArrowButton( m_pParmsGB );
m_pUpButton->setEnabled( false );
buttonLayout->addWidget( m_pUpButton );
m_pDownButton = new KArrowButton( m_pParmsGB, Qt::DownArrow );
m_pDownButton->setEnabled( false );
buttonLayout->addWidget( m_pDownButton );
KButtonBox* buttonBox = new KButtonBox(m_pParmsGB);
buttonBox->addButton( i18n("Ne&w Parameter..."), this, SLOT(slotNewParameter()) );
m_pDeleteButton = buttonBox->addButton( i18n("&Delete"), this, SLOT(slotDeleteParameter()) );
m_pPropertiesButton = buttonBox->addButton( i18n("&Properties"), this,
SLOT(slotParameterProperties()) );
parmsLayout->addWidget(buttonBox);
topLayout -> addWidget(m_pParmsGB);
m_pDeleteButton->setEnabled(false);
m_pPropertiesButton->setEnabled(false);
m_pUpButton->setEnabled(false);
m_pDownButton->setEnabled(false);
// Add "void". We use this for denoting "no return type" independent
// of the programming language.
// For example, the Ada generator would interpret the return type
// "void" as an instruction to generate a procedure instead of a
// function.
insertType( "void" );
m_pRtypeCB->setDuplicatesEnabled(false);//only allow one of each type in box
m_pRtypeCB->setCompletionMode( KGlobalSettings::CompletionPopup );
// add template parameters
UMLClassifier *classifier = dynamic_cast<UMLClassifier*>(m_pOperation->parent());
if (classifier) {
UMLClassifierListItemList tmplParams( classifier->getFilteredList(Uml::ot_Template) );
for (UMLClassifierListItem *li = tmplParams.first(); li; li = tmplParams.next())
insertType( li->getName() );
}
//now add the Classes and Interfaces (both are Concepts)
UMLClassifierList namesList( m_doc->getConcepts() );
UMLClassifier* pConcept = 0;
for(pConcept=namesList.first(); pConcept!=0 ;pConcept=namesList.next()) {
insertType( pConcept->getFullyQualifiedName() );
}
//work out which one to select
int returnBoxCount = 0;
bool foundReturnType = false;
while (returnBoxCount < m_pRtypeCB->count() && foundReturnType == false) {
QString returnBoxString = m_pRtypeCB->text(returnBoxCount);
if ( returnBoxString == m_pOperation->getTypeName() ) {
foundReturnType = true;
m_pRtypeCB->setCurrentItem(returnBoxCount);
break;
}
returnBoxCount++;
}
if (!foundReturnType) {
insertType( m_pOperation->getTypeName(), 0 );
m_pRtypeCB->setCurrentItem(0);
}
//fill in parm list box
UMLAttributeList list = m_pOperation->getParmList();
UMLAttribute * pAtt = 0;
for (pAtt = list.first(); pAtt; pAtt = list.next())
m_pParmsLB->insertItem( pAtt->getName() );
//set scope
Uml::Visibility scope = m_pOperation -> getVisibility();
if( scope == Uml::Visibility::Public )
m_pPublicRB -> setChecked( true );
else if( scope == Uml::Visibility::Private )
m_pPrivateRB -> setChecked( true );
else if( scope == Uml::Visibility::Protected )
m_pProtectedRB -> setChecked( true );
else if( scope == Uml::Visibility::Implementation )
m_pImplementationRB -> setChecked( true );
// manage stereotypes
m_pStereoTypeCB -> setDuplicatesEnabled(false);//only allow one of each type in box
m_pStereoTypeCB->setCompletionMode( KGlobalSettings::CompletionPopup );
insertStereotype (QString("")); // an empty stereotype is the default
int defaultStereotype=0;
bool foundDefaultStereotype = false;
for (UMLStereotypeListIt it(m_doc->getStereotypes()); it.current(); ++it) {
if (!foundDefaultStereotype) {
if ( m_pOperation->getStereotype() == it.current()->getName()) {
foundDefaultStereotype = true;
}
defaultStereotype++;
}
insertStereotype (it.current()->getName());
}
// lookup for a default stereotype, if the operation doesn't have one
if (foundDefaultStereotype)
m_pStereoTypeCB->setCurrentItem(defaultStereotype);
else
m_pStereoTypeCB->setCurrentItem(-1);
//setup parm list box signals
connect( m_pUpButton, SIGNAL( clicked() ), this, SLOT( slotParameterUp() ) );
connect( m_pDownButton, SIGNAL( clicked() ), this, SLOT( slotParameterDown() ) );
connect(m_pParmsLB, SIGNAL(clicked(QListBoxItem*)),
this, SLOT(slotParamsBoxClicked(QListBoxItem*)));
connect(m_pParmsLB, SIGNAL(rightButtonPressed(QListBoxItem *, const QPoint &)),
this, SLOT(slotParmRightButtonPressed(QListBoxItem *, const QPoint &)));
connect(m_pParmsLB, SIGNAL(rightButtonClicked(QListBoxItem *, const QPoint &)),
this, SLOT(slotParmRightButtonClicked(QListBoxItem *, const QPoint &)));
connect(m_pParmsLB, SIGNAL(doubleClicked(QListBoxItem *)),
this, SLOT(slotParmDoubleClick(QListBoxItem *)));
m_pNameLE->setFocus();
connect( m_pNameLE, SIGNAL( textChanged ( const QString & ) ), SLOT( slotNameChanged( const QString & ) ) );
slotNameChanged(m_pNameLE->text() );
}
