Taddress EditableLevelObjectEntryGroups::moveToNewBank(WritableROM& rom) {
// std::cout << "Preparing to move to new bank" << std::endl;
// More for convenience than anything else, we grab a whole bank of data
// for use by this table (and a few bits of associated code).
// Note that this basically requires expanding the ROM to 1 MB
FreeSpaceList::iterator spaceIt
= rom.freeSpace().getFreeSpace(LoadedROM::bankSize);
// Throw if a full bank isn't available
if (spaceIt == rom.freeSpace().freeSpaceList().end()) {
throw NotEnoughSpaceException(TALES_SRCANDLINE,
"EditableLevelObjectEntryGroups::"
"exportToROM(WritableROM&)",
LoadedROM::bankSize);
}
// std::cout << spaceIt->address() << " " << spaceIt->length() << std::endl;
Taddress newBaseAddress = spaceIt->address();
// Claim the bank
rom.freeSpace().claimSpace(spaceIt,
LoadedROM::bankSize);
// std::cout << "New base address: " << newBaseAddress << std::endl;
// Copy code segments C1 and C3 to new bank.
// C1 and C3 both contain code that references the object table,
// so they must (to avoid more complicated hacking) be in the same bank.
// After rearranging the code, the new bank will contain C1, C3, and
// the object table, in that order, starting from the beginning of the
// bank
// Copy C1 to start of bank
Taddress newC1Address = newBaseAddress;
std::memcpy(rom.directWrite(newC1Address),
codeSegmentC1,
lengthOfC1Segment);
// Copy C3 to directly after C1
Taddress newC3Address = newC1Address
+ lengthOfC1Segment;
std::memcpy(rom.directWrite(newC3Address),
codeSegmentC3,
lengthOfC3Segment);
// Set new export address for table (directly after C3)
int exportAddress = newBaseAddress
+ lengthOfC1Segment
+ lengthOfC3Segment;
// std::cout << "New C1 address: " << newC1Address << std::endl;
// std::cout << "New C3 address: " << newC3Address << std::endl;
// std::cout << "Export address: " << exportAddress << std::endl;
// Update all the code that references the old locations of C1 and C3
// Get the banked address for the new direct address of C1
int newC1BankNum = LoadedROM::directToBankNum(newC1Address);
int newC1BankedAddress = LoadedROM::directToBankedAddress(newC1Address);
// Get the banked address for the new direct address of C3
int newC3BankNum = LoadedROM::directToBankNum(newC3Address);
int newC3BankedAddress = LoadedROM::directToBankedAddress(newC3Address);
// Update bank number in code that calls C1
ByteConversion::toBytes(newC1BankNum,
rom.directWrite(callReferenceToC1Bank),
ByteSizes::uint8Size,
EndiannessTypes::little,
SignednessTypes::nosign);
// C1's banked address is the same (0000), so we don't need to update it
// ... but do anyway for consistency
ByteConversion::toBytes(newC1BankedAddress,
rom.directWrite(callReferenceToC1Address),
ByteSizes::uint16Size,
EndiannessTypes::little,
SignednessTypes::nosign);
// Update banked address in code that calls C3
ByteConversion::toBytes(newC3BankNum,
rom.directWrite(callReferenceToC3Bank),
ByteSizes::uint8Size,
EndiannessTypes::little,
SignednessTypes::nosign);
// Update bank number in code that calls C3.
ByteConversion::toBytes(newC3BankedAddress,
rom.directWrite(callReferenceToC3Address),
ByteSizes::uint16Size,
EndiannessTypes::little,
SignednessTypes::nosign);
// C3 contains a hardcoded JP instruction into itself. Since we moved
// C3, we have to update the JP to correspond to the new location.
// Get new address of the JP instruction's address parameter
Taddress addressOfNewJpParameter = newC3Address
+ offsetOfJpInC3;
// Get new address of the JP instruction's jump point base
Taddress addressOfNewJpBase = newC3Address
+ baseOffsetOfJpInC3;
// Compute the new target address
Taddress newJpTargetAddress = addressOfNewJpBase
- absoluteLengthOfJpInC3;
// std::cout << "New JP target: " << newJpTargetAddress << std::endl;
// Convert to banked form
Taddress newJpTargetBankedAddress
= LoadedROM::directToBankedAddress(newJpTargetAddress);
// Write the new target address to the JP parameter
ByteConversion::toBytes(newJpTargetBankedAddress,
rom.directWrite(addressOfNewJpParameter),
ByteSizes::uint16Size,
EndiannessTypes::little,
SignednessTypes::nosign);
// Get the banked address for the new direct address of the object table
// int newTableBankNum
// = LoadedROM::directToBankNum(exportAddress);
int newTableBankedAddress
= LoadedROM::directToBankedAddress(exportAddress);
// Update C1 to refer to the new location of the object table
ByteConversion::toBytes(newTableBankedAddress,
rom.directWrite(newC1Address
+ offsetOfTableReferenceInC1),
ByteSizes::uint16Size,
EndiannessTypes::little,
SignednessTypes::nosign);
// Update C3 to refer to the new location of the object table
ByteConversion::toBytes(newTableBankedAddress,
rom.directWrite(newC3Address
+ offsetOfTableReferenceInC3),
ByteSizes::uint16Size,
EndiannessTypes::little,
SignednessTypes::nosign);
// Update table information
// initialTableAddress_ = exportAddress;
// initialTableContentSize_ = spaceIt->length()
// - exportAddress
// - tableHeaderSize_;
// initialTableContentSize_ = exportAddress - spaceIt->address()
// - tableHeaderSize_;
// initialTableContentSize_ = LoadedROM::bankSize;
// std::cout << initialTableContentSize_ << std::endl;
// Mark that we've moved to a new bank
movedToNewBank_ = true;
return exportAddress;
}
void MetatileStructureSet::exportToROM(WritableROM& rom) {
// TODO: support for adding metatile definitions
// search freespace &c
FreeSpaceList::iterator spaceIt = rom.freeSpace().getFreeSpace(
exportSize());
if (spaceIt == rom.freeSpace().freeSpaceList().end()) {
throw NotEnoughSpaceException(TALES_SRCANDLINE,
"MetatileStructureSet::exportToROM("
"WritableROM&)",
exportSize());
}
int writeAddress = spaceIt->address();
address_ = spaceIt->address();
rom.freeSpace().claimSpace(spaceIt, exportSize());
// std::cout << "addr: " << writeAddress << std::endl;
// Starting address of structure definitions
int contentStartAddress = writeAddress
+ (index_.size() * ByteSizes::uint16Size);
// Write the index
for (MetatileIndexToStructureMap::iterator it = index_.begin();
it != index_.end();
it++) {
int contentIndex = it->second;
// Compute the address of the content
Taddress contentAddress = (contentStartAddress
+ (contentIndex * MetatileStructure::dataSize));
// Convert to banked address
Taddress contentBankedAddress = LoadedROM
::directToBankedAddress(contentAddress);
// Write to index
Tbyte buffer[ByteSizes::uint16Size];
ByteConversion::toBytes(contentBankedAddress,
buffer,
ByteSizes::uint16Size,
EndiannessTypes::little,
SignednessTypes::nosign);
rom.directWrite(writeAddress + (it->first * ByteSizes::uint16Size),
buffer,
ByteSizes::uint16Size);
}
// Write content
int metatileNum = 0;
for (MetatileStructureCollection::iterator it = primaryStorage_.begin();
it != primaryStorage_.end();
it++) {
// Write metatile to buffer
Tbyte buffer[MetatileStructure::dataSize];
it->writeToData(buffer);
// Write buffer to table
rom.directWrite(contentStartAddress
+ (metatileNum * MetatileStructure::dataSize),
buffer,
MetatileStructure::dataSize);
++metatileNum;
}
// std::cout << "metatiles: " << metatileNum << std::endl;
// std::cout << std::endl;
}
void TailsAdvBank0Hacks::addUseAllInventoryHack(
WritableROM& rom) {
// Find free space
FreeSpaceList::iterator spaceIt
= rom.freeSpace().getFreeSpace(allInventoryHackCodeDataSize);
// Throw if not enough space
if (spaceIt == rom.freeSpace().freeSpaceList().end()) {
throw NotEnoughSpaceException(TALES_SRCANDLINE,
"TailsAdvBank0Hacks::addUseAllInventoryHack("
"WritableROM&)",
allInventoryHackCodeDataSize);
}
Taddress writeAddress = spaceIt->address();
rom.freeSpace().claimSpace(spaceIt,
allInventoryHackCodeDataSize);
// std::cout << writeAddress << std::endl;
// Write main code and data
rom.directWrite(writeAddress,
allInventoryHackMainData,
allInventoryHackMainLength);
// Fill in addresses of data tables
ByteConversion::toBytes(LoadedROM::directToBankedAddress(writeAddress
+ allInventoryHackMainTable1Offset),
rom.directWrite(writeAddress
+ allInventoryHackMainTable1ReferenceOffset),
ByteSizes::uint16Size,
EndiannessTypes::little,
SignednessTypes::nosign);
ByteConversion::toBytes(LoadedROM::directToBankedAddress(writeAddress
+ allInventoryHackMainTable2Offset),
rom.directWrite(writeAddress
+ allInventoryHackMainTable2ReferenceOffset),
ByteSizes::uint16Size,
EndiannessTypes::little,
SignednessTypes::nosign);
// Add trigger 1
rom.directWrite(allInventoryHackTrigger1Address,
allInventoryHackTrigger1Data,
allInventoryHackTrigger1Length);
// Fill in bank
ByteConversion::toBytes(LoadedROM::directToBankNum(writeAddress
+ allInventoryHackMainCodeStartOffset),
rom.directWrite(
allInventoryHackTrigger1Address
+ allInventoryHackTrigger1BankReferenceOffset),
ByteSizes::uint8Size,
EndiannessTypes::little,
SignednessTypes::nosign);
// Fill in address
ByteConversion::toBytes(LoadedROM::directToBankedAddress(writeAddress
+ allInventoryHackMainCodeStartOffset),
rom.directWrite(
allInventoryHackTrigger1Address
+ allInventoryHackTrigger1AddressReferenceOffset),
ByteSizes::uint16Size,
EndiannessTypes::little,
SignednessTypes::nosign);
// Add trigger 2
rom.directWrite(allInventoryHackTrigger2Address,
allInventoryHackTrigger2Data,
allInventoryHackTrigger2Length);
// Fill in bank
ByteConversion::toBytes(LoadedROM::directToBankNum(writeAddress
+ allInventoryHackMainCodeStartOffset),
rom.directWrite(
allInventoryHackTrigger2Address
+ allInventoryHackTrigger2BankReferenceOffset),
ByteSizes::uint8Size,
EndiannessTypes::little,
SignednessTypes::nosign);
// Fill in address
ByteConversion::toBytes(LoadedROM::directToBankedAddress(writeAddress
+ allInventoryHackMainCodeStartOffset),
rom.directWrite(
allInventoryHackTrigger2Address
+ allInventoryHackTrigger2AddressReferenceOffset),
ByteSizes::uint16Size,
EndiannessTypes::little,
SignednessTypes::nosign);
// Add initializer 1
rom.directWrite(allInventoryHackInitializer1Address,
allInventoryHackInitializer1Data,
allInventoryHackInitializer1Length);
// Add initializer 2
rom.directWrite(allInventoryHackInitializer2Address,
allInventoryHackInitializer2Data,
allInventoryHackInitializer2Length);
// Add initializer 3
rom.directWrite(allInventoryHackInitializer3Address,
allInventoryHackInitializer3Data,
allInventoryHackInitializer3Length);
// Add initializer 4
rom.directWrite(allInventoryHackInitializer4Address,
allInventoryHackInitializer4Data,
allInventoryHackInitializer4Length);
}
