void
nsInlineFrame::ReflowFrames(nsPresContext* aPresContext,
const ReflowInput& aReflowInput,
InlineReflowInput& irs,
ReflowOutput& aMetrics,
nsReflowStatus& aStatus)
{
MOZ_ASSERT(aStatus.IsEmpty(), "Caller should pass a fresh reflow status!");
nsLineLayout* lineLayout = aReflowInput.mLineLayout;
bool inFirstLine = aReflowInput.mLineLayout->GetInFirstLine();
RestyleManager* restyleManager = aPresContext->RestyleManager();
WritingMode frameWM = aReflowInput.GetWritingMode();
WritingMode lineWM = aReflowInput.mLineLayout->mRootSpan->mWritingMode;
LogicalMargin framePadding = aReflowInput.ComputedLogicalBorderPadding();
nscoord startEdge = 0;
const bool boxDecorationBreakClone =
MOZ_UNLIKELY(StyleBorder()->mBoxDecorationBreak ==
StyleBoxDecorationBreak::Clone);
// Don't offset by our start borderpadding if we have a prev continuation or
// if we're in a part of an {ib} split other than the first one. For
// box-decoration-break:clone we always offset our start since all
// continuations have border/padding.
if ((!GetPrevContinuation() && !FrameIsNonFirstInIBSplit()) ||
boxDecorationBreakClone) {
startEdge = framePadding.IStart(frameWM);
}
nscoord availableISize = aReflowInput.AvailableISize();
NS_ASSERTION(availableISize != NS_UNCONSTRAINEDSIZE,
"should no longer use available widths");
// Subtract off inline axis border+padding from availableISize
availableISize -= startEdge;
availableISize -= framePadding.IEnd(frameWM);
lineLayout->BeginSpan(this, &aReflowInput, startEdge,
startEdge + availableISize, &mBaseline);
// First reflow our principal children.
nsIFrame* frame = mFrames.FirstChild();
bool done = false;
while (frame) {
// Check if we should lazily set the child frame's parent pointer.
if (irs.mSetParentPointer) {
nsIFrame* child = frame;
do {
child->SetParent(this);
if (inFirstLine) {
restyleManager->ReparentStyleContext(child);
nsLayoutUtils::MarkDescendantsDirty(child);
}
// We also need to do the same for |frame|'s next-in-flows that are in
// the sibling list. Otherwise, if we reflow |frame| and it's complete
// we'll crash when trying to delete its next-in-flow.
// This scenario doesn't happen often, but it can happen.
nsIFrame* nextSibling = child->GetNextSibling();
child = child->GetNextInFlow();
if (MOZ_UNLIKELY(child)) {
while (child != nextSibling && nextSibling) {
nextSibling = nextSibling->GetNextSibling();
}
if (!nextSibling) {
child = nullptr;
}
}
MOZ_ASSERT(!child || mFrames.ContainsFrame(child));
} while (child);
// Fix the parent pointer for ::first-letter child frame next-in-flows,
// so nsFirstLetterFrame::Reflow can destroy them safely (bug 401042).
nsIFrame* realFrame = nsPlaceholderFrame::GetRealFrameFor(frame);
if (realFrame->IsLetterFrame()) {
nsIFrame* child = realFrame->PrincipalChildList().FirstChild();
if (child) {
NS_ASSERTION(child->IsTextFrame(), "unexpected frame type");
nsIFrame* nextInFlow = child->GetNextInFlow();
for ( ; nextInFlow; nextInFlow = nextInFlow->GetNextInFlow()) {
NS_ASSERTION(nextInFlow->IsTextFrame(), "unexpected frame type");
if (mFrames.ContainsFrame(nextInFlow)) {
nextInFlow->SetParent(this);
if (inFirstLine) {
restyleManager->ReparentStyleContext(nextInFlow);
nsLayoutUtils::MarkDescendantsDirty(nextInFlow);
}
}
else {
#ifdef DEBUG
// Once we find a next-in-flow that isn't ours none of the
// remaining next-in-flows should be either.
for ( ; nextInFlow; nextInFlow = nextInFlow->GetNextInFlow()) {
NS_ASSERTION(!mFrames.ContainsFrame(nextInFlow),
"unexpected letter frame flow");
}
#endif
break;
}
}
}
}
}
MOZ_ASSERT(frame->GetParent() == this);
if (!done) {
bool reflowingFirstLetter = lineLayout->GetFirstLetterStyleOK();
ReflowInlineFrame(aPresContext, aReflowInput, irs, frame, aStatus);
done = aStatus.IsInlineBreak() ||
(!reflowingFirstLetter && aStatus.IsIncomplete());
if (done) {
if (!irs.mSetParentPointer) {
break;
}
// Keep reparenting the remaining siblings, but don't reflow them.
nsFrameList* pushedFrames = GetOverflowFrames();
if (pushedFrames && pushedFrames->FirstChild() == frame) {
// Don't bother if |frame| was pushed to our overflow list.
break;
}
} else {
irs.mPrevFrame = frame;
}
}
frame = frame->GetNextSibling();
}
// Attempt to pull frames from our next-in-flow until we can't
if (!done && GetNextInFlow()) {
while (true) {
bool reflowingFirstLetter = lineLayout->GetFirstLetterStyleOK();
bool isComplete;
if (!frame) { // Could be non-null if we pulled a first-letter frame and
// it created a continuation, since we don't push those.
frame = PullOneFrame(aPresContext, irs, &isComplete);
}
#ifdef NOISY_PUSHING
printf("%p pulled up %p\n", this, frame);
#endif
if (nullptr == frame) {
if (!isComplete) {
aStatus.Reset();
aStatus.SetIncomplete();
}
break;
}
ReflowInlineFrame(aPresContext, aReflowInput, irs, frame, aStatus);
if (aStatus.IsInlineBreak() ||
(!reflowingFirstLetter && aStatus.IsIncomplete())) {
break;
}
irs.mPrevFrame = frame;
frame = frame->GetNextSibling();
}
}
NS_ASSERTION(!aStatus.IsComplete() || !GetOverflowFrames(),
"We can't be complete AND have overflow frames!");
// If after reflowing our children they take up no area then make
// sure that we don't either.
//
// Note: CSS demands that empty inline elements still affect the
// line-height calculations. However, continuations of an inline
// that are empty we force to empty so that things like collapsed
// whitespace in an inline element don't affect the line-height.
aMetrics.ISize(lineWM) = lineLayout->EndSpan(this);
// Compute final width.
// XXX Note that that the padding start and end are in the frame's
// writing mode, but the metrics' inline-size is in the line's
// writing mode. This makes sense if the line and frame are both
// vertical or both horizontal, but what should happen with
// orthogonal inlines?
// Make sure to not include our start border and padding if we have a prev
// continuation or if we're in a part of an {ib} split other than the first
// one. For box-decoration-break:clone we always include our start border
// and padding since all continuations have them.
if ((!GetPrevContinuation() && !FrameIsNonFirstInIBSplit()) ||
boxDecorationBreakClone) {
aMetrics.ISize(lineWM) += framePadding.IStart(frameWM);
}
/*
* We want to only apply the end border and padding if we're the last
* continuation and either not in an {ib} split or the last part of it. To
* be the last continuation we have to be complete (so that we won't get a
* next-in-flow) and have no non-fluid continuations on our continuation
* chain. For box-decoration-break:clone we always apply the end border and
* padding since all continuations have them.
*/
if ((aStatus.IsComplete() &&
!LastInFlow()->GetNextContinuation() &&
!FrameIsNonLastInIBSplit()) ||
boxDecorationBreakClone) {
aMetrics.ISize(lineWM) += framePadding.IEnd(frameWM);
}
nsLayoutUtils::SetBSizeFromFontMetrics(this, aMetrics,
framePadding, lineWM, frameWM);
// For now our overflow area is zero. The real value will be
// computed in |nsLineLayout::RelativePositionFrames|.
aMetrics.mOverflowAreas.Clear();
#ifdef NOISY_FINAL_SIZE
ListTag(stdout);
printf(": metrics=%d,%d ascent=%d\n",
aMetrics.Width(), aMetrics.Height(), aMetrics.TopAscent());
#endif
}
void
nsRubyFrame::ReflowSegment(nsPresContext* aPresContext,
const ReflowInput& aReflowInput,
nsRubyBaseContainerFrame* aBaseContainer,
nsReflowStatus& aStatus)
{
WritingMode lineWM = aReflowInput.mLineLayout->GetWritingMode();
LogicalSize availSize(lineWM, aReflowInput.AvailableISize(),
aReflowInput.AvailableBSize());
WritingMode rubyWM = GetWritingMode();
NS_ASSERTION(!rubyWM.IsOrthogonalTo(lineWM),
"Ruby frame writing-mode shouldn't be orthogonal to its line");
AutoRubyTextContainerArray textContainers(aBaseContainer);
const uint32_t rtcCount = textContainers.Length();
ReflowOutput baseMetrics(aReflowInput);
bool pushedFrame;
aReflowInput.mLineLayout->ReflowFrame(aBaseContainer, aStatus,
&baseMetrics, pushedFrame);
if (aStatus.IsInlineBreakBefore()) {
if (aBaseContainer != mFrames.FirstChild()) {
// Some segments may have been reflowed before, hence it is not
// a break-before for the ruby container.
aStatus.Reset();
aStatus.SetInlineLineBreakAfter();
aStatus.SetIncomplete();
PushChildrenToOverflow(aBaseContainer, aBaseContainer->GetPrevSibling());
aReflowInput.mLineLayout->SetDirtyNextLine();
}
// This base container is not placed at all, we can skip all
// text containers paired with it.
return;
}
if (aStatus.IsIncomplete()) {
// It always promise that if the status is incomplete, there is a
// break occurs. Break before has been processed above. However,
// it is possible that break after happens with the frame reflow
// completed. It happens if there is a force break at the end.
MOZ_ASSERT(aStatus.IsInlineBreakAfter());
// Find the previous sibling which we will
// insert new continuations after.
nsIFrame* lastChild;
if (rtcCount > 0) {
lastChild = textContainers.LastElement();
} else {
lastChild = aBaseContainer;
}
// Create continuations for the base container
nsIFrame* newBaseContainer = CreateNextInFlow(aBaseContainer);
// newBaseContainer is null if there are existing next-in-flows.
// We only need to move and push if there were not.
if (newBaseContainer) {
// Move the new frame after all the text containers
mFrames.RemoveFrame(newBaseContainer);
mFrames.InsertFrame(nullptr, lastChild, newBaseContainer);
// Create continuations for text containers
nsIFrame* newLastChild = newBaseContainer;
for (uint32_t i = 0; i < rtcCount; i++) {
nsIFrame* newTextContainer = CreateNextInFlow(textContainers[i]);
MOZ_ASSERT(newTextContainer, "Next-in-flow of rtc should not exist "
"if the corresponding rbc does not");
mFrames.RemoveFrame(newTextContainer);
mFrames.InsertFrame(nullptr, newLastChild, newTextContainer);
newLastChild = newTextContainer;
}
}
if (lastChild != mFrames.LastChild()) {
// Always push the next frame after the last child in this segment.
// It is possible that we pulled it back before our next-in-flow
// drain our overflow.
PushChildrenToOverflow(lastChild->GetNextSibling(), lastChild);
aReflowInput.mLineLayout->SetDirtyNextLine();
}
} else {
// If the ruby base container is reflowed completely, the line
// layout will remove the next-in-flows of that frame. But the
// line layout is not aware of the ruby text containers, hence
// it is necessary to remove them here.
for (uint32_t i = 0; i < rtcCount; i++) {
nsIFrame* nextRTC = textContainers[i]->GetNextInFlow();
if (nextRTC) {
nextRTC->GetParent()->DeleteNextInFlowChild(nextRTC, true);
}
}
}
nscoord segmentISize = baseMetrics.ISize(lineWM);
const nsSize dummyContainerSize;
LogicalRect baseRect =
aBaseContainer->GetLogicalRect(lineWM, dummyContainerSize);
// We need to position our rtc frames on one side or the other of the
// base container's rect, using a coordinate space that's relative to
// the ruby frame. Right now, the base container's rect's block-axis
// position is relative to the block container frame containing the
// lines, so we use 0 instead. (i.e. we assume that the base container
// is adjacent to the ruby frame's block-start edge.)
// XXX We may need to add border/padding here. See bug 1055667.
baseRect.BStart(lineWM) = 0;
// The rect for offsets of text containers.
LogicalRect offsetRect = baseRect;
RubyBlockLeadings descLeadings = aBaseContainer->GetDescendantLeadings();
offsetRect.BStart(lineWM) -= descLeadings.mStart;
offsetRect.BSize(lineWM) += descLeadings.mStart + descLeadings.mEnd;
for (uint32_t i = 0; i < rtcCount; i++) {
nsRubyTextContainerFrame* textContainer = textContainers[i];
WritingMode rtcWM = textContainer->GetWritingMode();
nsReflowStatus textReflowStatus;
ReflowOutput textMetrics(aReflowInput);
ReflowInput textReflowInput(aPresContext, aReflowInput, textContainer,
availSize.ConvertTo(rtcWM, lineWM));
textContainer->Reflow(aPresContext, textMetrics,
textReflowInput, textReflowStatus);
// Ruby text containers always return complete reflow status even when
// they have continuations, because the breaking has already been
// handled when reflowing the base containers.
NS_ASSERTION(textReflowStatus.IsEmpty(),
"Ruby text container must not break itself inside");
// The metrics is initialized with reflow state of this ruby frame,
// hence the writing-mode is tied to rubyWM instead of rtcWM.
LogicalSize size = textMetrics.Size(rubyWM).ConvertTo(lineWM, rubyWM);
textContainer->SetSize(lineWM, size);
nscoord reservedISize = RubyUtils::GetReservedISize(textContainer);
segmentISize = std::max(segmentISize, size.ISize(lineWM) + reservedISize);
uint8_t rubyPosition = textContainer->StyleText()->mRubyPosition;
MOZ_ASSERT(rubyPosition == NS_STYLE_RUBY_POSITION_OVER ||
rubyPosition == NS_STYLE_RUBY_POSITION_UNDER);
Maybe<LogicalSide> side;
if (rubyPosition == NS_STYLE_RUBY_POSITION_OVER) {
side.emplace(lineWM.LogicalSideForLineRelativeDir(eLineRelativeDirOver));
} else if (rubyPosition == NS_STYLE_RUBY_POSITION_UNDER) {
side.emplace(lineWM.LogicalSideForLineRelativeDir(eLineRelativeDirUnder));
} else {
// XXX inter-character support in bug 1055672
MOZ_ASSERT_UNREACHABLE("Unsupported ruby-position");
}
LogicalPoint position(lineWM);
if (side.isSome()) {
if (nsLayoutUtils::IsInterCharacterRubyEnabled() &&
rtcWM.IsVerticalRL() &&
lineWM.GetInlineDir() == WritingMode::eInlineLTR) {
// Inter-character ruby annotations are only supported for vertical-rl
// in ltr horizontal writing. Fall back to non-inter-character behavior
// otherwise.
LogicalPoint offset(lineWM, offsetRect.ISize(lineWM),
offsetRect.BSize(lineWM) > size.BSize(lineWM) ?
(offsetRect.BSize(lineWM) - size.BSize(lineWM)) / 2 : 0);
position = offsetRect.Origin(lineWM) + offset;
aReflowInput.mLineLayout->AdvanceICoord(size.ISize(lineWM));
} else if (side.value() == eLogicalSideBStart) {
offsetRect.BStart(lineWM) -= size.BSize(lineWM);
offsetRect.BSize(lineWM) += size.BSize(lineWM);
position = offsetRect.Origin(lineWM);
} else if (side.value() == eLogicalSideBEnd) {
position = offsetRect.Origin(lineWM) +
LogicalPoint(lineWM, 0, offsetRect.BSize(lineWM));
offsetRect.BSize(lineWM) += size.BSize(lineWM);
} else {
MOZ_ASSERT_UNREACHABLE("???");
}
}
// Using a dummy container-size here, so child positioning may not be
// correct. We will fix it in nsLineLayout after the whole line is
// reflowed.
FinishReflowChild(textContainer, aPresContext, textMetrics,
&textReflowInput, lineWM, position, dummyContainerSize, 0);
}
MOZ_ASSERT(baseRect.ISize(lineWM) == offsetRect.ISize(lineWM),
"Annotations should only be placed on the block directions");
nscoord deltaISize = segmentISize - baseMetrics.ISize(lineWM);
if (deltaISize <= 0) {
RubyUtils::ClearReservedISize(aBaseContainer);
} else {
RubyUtils::SetReservedISize(aBaseContainer, deltaISize);
aReflowInput.mLineLayout->AdvanceICoord(deltaISize);
}
// Set block leadings of the base container
nscoord startLeading = baseRect.BStart(lineWM) - offsetRect.BStart(lineWM);
nscoord endLeading = offsetRect.BEnd(lineWM) - baseRect.BEnd(lineWM);
// XXX When bug 765861 gets fixed, this warning should be upgraded.
NS_WARNING_ASSERTION(startLeading >= 0 && endLeading >= 0,
"Leadings should be non-negative (because adding "
"ruby annotation can only increase the size)");
mLeadings.Update(startLeading, endLeading);
}
