void DIALOG_COPPER_ZONE::OnNetSortingOptionSelected( wxCommandEvent& event )
{
initListNetsParams();
buildAvailableListOfNets();
m_netNameShowFilter = m_ShowNetNameFilter->GetValue();
if( m_Config )
{
m_Config->Write( ZONE_NET_SORT_OPTION_KEY, (long) m_NetDisplayOption->GetSelection() );
wxString Filter = m_DoNotShowNetNameFilter->GetValue();
m_Config->Write( ZONE_NET_FILTER_STRING_KEY, Filter );
}
}
void DIALOG_PRINT_USING_PRINTER::OnCloseWindow( wxCloseEvent& event )
/********************************************************************/
{
SetPrintParameters();
if( m_Config )
{
m_Config->Write( OPTKEY_PRINT_X_FINESCALE_ADJ, s_Parameters.m_XScaleAdjust );
m_Config->Write( OPTKEY_PRINT_Y_FINESCALE_ADJ, s_Parameters.m_YScaleAdjust );
m_Config->Write( OPTKEY_PRINT_SCALE, m_ScaleOption->GetSelection() );
m_Config->Write( OPTKEY_PRINT_PAGE_FRAME, s_Parameters.m_Print_Sheet_Ref);
m_Config->Write( OPTKEY_PRINT_MONOCHROME_MODE, s_Parameters.m_Print_Black_and_White);
wxString layerKey;
for( LAYER_NUM layer = FIRST_LAYER; layer < NB_GERBER_LAYERS; ++layer )
{
layerKey.Printf( OPTKEY_LAYERBASE, layer );
m_Config->Write( layerKey, m_BoxSelectLayer[layer]->IsChecked() );
}
}
EndModal( 0 );
}
bool DIALOG_COPPER_ZONE::AcceptOptions( bool aPromptForErrors, bool aUseExportableSetupOnly )
{
switch( m_PadInZoneOpt->GetSelection() )
{
case 3:
// Pads are not covered
m_settings.SetPadConnection( PAD_NOT_IN_ZONE );
break;
case 2:
// Use thermal relief for THT pads
m_settings.SetPadConnection( THT_THERMAL );
break;
case 1:
// Use thermal relief for pads
m_settings.SetPadConnection( THERMAL_PAD );
break;
case 0:
// pads are covered by copper
m_settings.SetPadConnection( PAD_IN_ZONE );
break;
}
switch( m_OutlineAppearanceCtrl->GetSelection() )
{
case 0:
m_settings.m_Zone_HatchingStyle = CPolyLine::NO_HATCH;
break;
case 1:
m_settings.m_Zone_HatchingStyle = CPolyLine::DIAGONAL_EDGE;
break;
case 2:
m_settings.m_Zone_HatchingStyle = CPolyLine::DIAGONAL_FULL;
break;
}
m_settings.m_ArcToSegmentsCount = m_ArcApproximationOpt->GetSelection() == 1 ?
ARC_APPROX_SEGMENTS_COUNT_HIGHT_DEF :
ARC_APPROX_SEGMENTS_COUNT_LOW_DEF;
if( m_Config )
{
m_Config->Write( ZONE_NET_OUTLINES_HATCH_OPTION_KEY,
(long) m_settings.m_Zone_HatchingStyle );
wxString filter = m_DoNotShowNetNameFilter->GetValue();
m_Config->Write( ZONE_NET_FILTER_STRING_KEY, filter );
}
m_netNameShowFilter = m_ShowNetNameFilter->GetValue();
m_settings.m_FillMode = (m_FillModeCtrl->GetSelection() == 0) ? 0 : 1;
wxString txtvalue = m_ZoneClearanceCtrl->GetValue();
m_settings.m_ZoneClearance = ReturnValueFromString( g_UserUnit, txtvalue );
// Test if this is a reasonable value for this parameter
// A too large value can hang Pcbnew
#define CLEARANCE_MAX_VALUE ZONE_CLEARANCE_MAX_VALUE_MIL*IU_PER_MILS
if( m_settings.m_ZoneClearance > CLEARANCE_MAX_VALUE )
{
wxString msg;
msg.Printf( _( "Clearance must be smaller than %f\" / %f mm." ),
ZONE_CLEARANCE_MAX_VALUE_MIL / 1000.0, ZONE_CLEARANCE_MAX_VALUE_MIL * 0.0254 );
DisplayError( this, msg );
return false;
}
txtvalue = m_ZoneMinThicknessCtrl->GetValue();
m_settings.m_ZoneMinThickness = ReturnValueFromString( g_UserUnit, txtvalue );
if( m_settings.m_ZoneMinThickness < (ZONE_THICKNESS_MIN_VALUE_MIL*IU_PER_MILS) )
{
wxString msg;
msg.Printf( _( "Minimum width must be larger than %f\" / %f mm." ),
ZONE_THICKNESS_MIN_VALUE_MIL / 1000.0, ZONE_THICKNESS_MIN_VALUE_MIL * 0.0254 );
DisplayError( this, msg );
return false;
}
m_settings.SetCornerSmoothingType( m_cornerSmoothingChoice->GetSelection() );
txtvalue = m_cornerSmoothingCtrl->GetValue();
m_settings.SetCornerRadius( ReturnValueFromString( g_UserUnit, txtvalue ) );
m_settings.m_ZonePriority = m_PriorityLevelCtrl->GetValue();
if( m_OrientEdgesOpt->GetSelection() == 0 )
m_settings.m_Zone_45_Only = false;
else
m_settings.m_Zone_45_Only = true;
m_settings.m_ThermalReliefGap = ReturnValueFromTextCtrl( *m_AntipadSizeValue );
m_settings.m_ThermalReliefCopperBridge = ReturnValueFromTextCtrl( *m_CopperWidthValue );
if( m_Config )
{
ConfigBaseWriteDouble( m_Config, ZONE_CLEARANCE_WIDTH_STRING_KEY,
(double) m_settings.m_ZoneClearance / IU_PER_MILS );
ConfigBaseWriteDouble( m_Config, ZONE_MIN_THICKNESS_WIDTH_STRING_KEY,
(double) m_settings.m_ZoneMinThickness / IU_PER_MILS );
ConfigBaseWriteDouble( m_Config, ZONE_THERMAL_RELIEF_GAP_STRING_KEY,
(double) m_settings.m_ThermalReliefGap / IU_PER_MILS );
ConfigBaseWriteDouble( m_Config, ZONE_THERMAL_RELIEF_COPPER_WIDTH_STRING_KEY,
(double) m_settings.m_ThermalReliefCopperBridge / IU_PER_MILS );
}
if( m_settings.m_ThermalReliefCopperBridge <= m_settings.m_ZoneMinThickness )
{
DisplayError( this,
_( "Thermal relief spoke width is smaller than the minimum width." ) );
return false;
}
// If we use only exportable to others zones parameters, exit here:
if( aUseExportableSetupOnly )
return true;
// Get the layer selection for this zone
int ii = m_LayerSelectionCtrl->GetFirstSelected();
if( ii < 0 && aPromptForErrors )
{
DisplayError( this, _( "No layer selected." ) );
return false;
}
m_settings.m_CurrentZone_Layer = m_LayerId[ii];
// Get the net name selection for this zone
ii = m_ListNetNameSelection->GetSelection();
if( ii < 0 && aPromptForErrors )
{
DisplayError( this, _( "No net selected." ) );
return false;
}
if( ii == 0 ) // the not connected option was selected: this is not a good practice: warn:
{
if( !IsOK( this, _(
"You have chosen the \"not connected\" option. This will create insulated copper islands. Are you sure ?" ) )
)
return false;
}
wxString net_name = m_ListNetNameSelection->GetString( ii );
m_settings.m_NetcodeSelection = 0;
// Search net_code for this net, if a net was selected
if( m_ListNetNameSelection->GetSelection() > 0 )
{
NETINFO_ITEM* net = m_Parent->GetBoard()->FindNet( net_name );
if( net )
m_settings.m_NetcodeSelection = net->GetNet();
}
return true;
}
bool ecRunTestsSettings::SaveConfig(wxConfig& config)
{
config.Write(_("/Run Tests/TimeoutType"), (long) m_nTimeoutType);
config.Write(_("/Run Tests/DownloadTimeoutType"), (long) m_nDownloadTimeoutType);
config.Write(_("/Run Tests/Remote"), m_bRemote);
config.Write(_("/Run Tests/Serial"), m_bSerial);
config.Write(_("/Run Tests/Port"), m_strPort);
config.Write(_("/Run Tests/Baud"), (long) m_nBaud);
config.Write(_("/Run Tests/LocalTCPIPHost"), m_strLocalTCPIPHost);
config.Write(_("/Run Tests/LocalTCPIPPort"), (long) m_nLocalTCPIPPort);
config.Write(_("/Run Tests/ResetType"), (long) m_nReset);
config.Write(_("/Run Tests/ResetString"), m_strReset);
config.Write(_("/Run Tests/ResourceHost"), m_strResourceHost);
config.Write(_("/Run Tests/ResourcePort"), (long) m_nResourcePort);
config.Write(_("/Run Tests/RemoteHost"), m_strRemoteHost);
config.Write(_("/Run Tests/RemotePort"), (long) m_nRemotePort);
config.Write(_("/Run Tests/Farmed"), m_bFarmed);
return TRUE;
}