/**
* Read the file designated by @a filename and fill @a output.
*/
void KistlerDATFileIO::Read(const std::string& filename, Acquisition::Pointer output)
{
output->Reset();
IEEELittleEndianBinaryFileStream bifs;
bifs.SetExceptions(BinaryFileStream::EndFileBit | BinaryFileStream::FailBit | BinaryFileStream::BadBit);
try
{
bifs.Open(filename, BinaryFileStream::In);
// WARNING: The header key is maybe not a key but the number of force platforms in the file!
if (bifs.ReadI32() != 2)
throw(KistlerDATFileIOException("Wrong header key. It is not a proper Kistler DAT file."));
// NOTE: It seems there are several headers in the file. A general header at the beginning
// which resume acquisition's information (number of channels, number of frames, sample
// rate, ...) and another one for each force plate. It is not yet clear
// General header?
// ---------------
// FIXME: What is the meaning of the next 12 bytes?
bifs.SeekRead(12, BinaryFileStream::Current);
// FIXME: What are the next (numel+4)*4 bytes, seems to be a table.
int32_t tableDims[2];
bifs.ReadI32(2,tableDims);
int32_t numel = tableDims[0] * tableDims[1] * 4;
bifs.SeekRead(4, BinaryFileStream::Current); // Space?
bifs.SeekRead(numel, BinaryFileStream::Current); // Table data?
bifs.SeekRead(4, BinaryFileStream::Current); // Space again?
// FIXME: What is the meaning of the next 22 bytes?
bifs.SeekRead(22, BinaryFileStream::Current);
// The next offsets given in the comments start at 16+(numel+4)*4+22.
// 0x00: (int32) Number of channels
int numberOfChannels = bifs.ReadI32();
// 0x04: (int32) Number of frames
int numberOfFrames = bifs.ReadI32();
// 0x08: ??
bifs.SeekRead(4, BinaryFileStream::Current);
// 0x12: (int32) ADC resolution? Number of ADC channels on the board?
int digitalResolution = bifs.ReadI32();
// 0x16: (double) Sample frequency
double sampleFrequency = bifs.ReadDouble();
// 0x24: ??
bifs.SeekRead(4, BinaryFileStream::Current);
// 0x28: ??
bifs.SeekRead(4, BinaryFileStream::Current);
// 0x32: Normalized force (N) - SKIPPED
bifs.SeekRead(4, BinaryFileStream::Current);
// 0x36: Normalized length (mm) - SKIPPED
bifs.SeekRead(4, BinaryFileStream::Current);
// 0x40: ??
bifs.SeekRead(4, BinaryFileStream::Current);
// 0x44: ??
bifs.SeekRead(4, BinaryFileStream::Current);
// 0x48: ??
bifs.SeekRead(4, BinaryFileStream::Current);
// 0x52: ?? (Could be an index)
bifs.SeekRead(2, BinaryFileStream::Current);
// 0x54: (int16_t) Number of characters (n) in the next string
// 0x56: (string) What is this string? - SKIPPED
bifs.SeekRead(bifs.ReadU16(), BinaryFileStream::Current);
// Force plate header?
// -------------------
// For simplification the adress in the description is reset to 0, but this is right after
// the general header, so add 94+(numel+4)*4+n to find the good position in a file.
// 0x00: ??
bifs.SeekRead(4, BinaryFileStream::Current);
// 0x04: ??
bifs.SeekRead(4, BinaryFileStream::Current);
// 0x08: ??
bifs.SeekRead(4, BinaryFileStream::Current);
// 0x12: (int32) Number of channels
if (bifs.ReadI32() != numberOfChannels)
throw(KistlerDATFileIOException("Wrong number of channels declared."));
// 0x16: (int32) Number of frames
if (bifs.ReadI32() != numberOfFrames)
throw(KistlerDATFileIOException("Wrong number of frames declared."));
// 0x20: ??
bifs.SeekRead(4, BinaryFileStream::Current);
// 0x24: (int32) ADC resolution
if (bifs.ReadI32() != digitalResolution)
throw(KistlerDATFileIOException("Wrong ADC resolution declared."));
// 0x28: (double) sample frequency
if (bifs.ReadDouble() != sampleFrequency)
throw(KistlerDATFileIOException("Wrong sample frequency declared."));
// 0x36: ??
bifs.SeekRead(4, BinaryFileStream::Current);
// 0x40: ??
bifs.SeekRead(4, BinaryFileStream::Current);
// 0x44: (int32) Normalized force (N) - SKIPPED
bifs.SeekRead(4, BinaryFileStream::Current);
// 0x48: (int32) Normalized length (mm) - SKIPPED
bifs.SeekRead(4, BinaryFileStream::Current);
// 0x52: ??
bifs.SeekRead(4, BinaryFileStream::Current);
// 0x56: ??
bifs.SeekRead(4, BinaryFileStream::Current);
// 0x60: ??
bifs.SeekRead(4, BinaryFileStream::Current);
// 0x64: (uint8) Number of characters (i) for the manufacturer of the force plateform
// 0x65: (string) Manufacter of the force plateform - SKIPPED
bifs.SeekRead(bifs.ReadU8(), BinaryFileStream::Current);
// 0x65+i: (int16) Number of characters (j) for the reference of the force plateform
// 0x66+i: (string) Reference of the force plateform - SKIPPED
bifs.SeekRead(bifs.ReadU8(), BinaryFileStream::Current);
// 0x66+i+j: (uint8) Number of characters (k) for the ? (serial number?)
// 0x67+i+j: (string) (Serial number?) of the force plateform - SKIPPED
bifs.SeekRead(bifs.ReadU8(), BinaryFileStream::Current);
// 0x67+i+j+k: (int32) Contact period start (sample #) - SKIPPED
bifs.SeekRead(4, BinaryFileStream::Current);
// 0x71+i+j+k: (int32) Contact period end (sample #) - SKIPPED
bifs.SeekRead(4, BinaryFileStream::Current);
// 0x75+i+j+k: ?? - Seems to be a double
bifs.SeekRead(8, BinaryFileStream::Current);
// 0x83+i+j+k: ??
bifs.SeekRead(4, BinaryFileStream::Current);
// 0x87+i+j+k: (double) FP width (mm)
double width = bifs.ReadDouble();
// 0x95+i+j+k: (double) FP length (mm)
double length = bifs.ReadDouble();
// 0x103+i+j+k: (double) FP a (mm)
double a = bifs.ReadDouble();
// 0x111+i+j+k: (double) FP b (mm)
double b = bifs.ReadDouble();
// What are the next 24 bytes? They are set to 0.
bifs.SeekRead(24, BinaryFileStream::Current);
// Why the parameter az0 is repeated two times?
double az0 = bifs.ReadDouble();
bifs.SeekRead(8, BinaryFileStream::Current); // az0 is written a second time
// The next values are 3 strings which contain the word "INTEGRATED"
// Maybe this is related to know if the component of each sensor is linked to built-in charge amplifier
bifs.SeekRead(bifs.ReadU8(), BinaryFileStream::Current); // Integrated
bifs.SeekRead(bifs.ReadU8(), BinaryFileStream::Current); // Integrated
bifs.SeekRead(bifs.ReadU8(), BinaryFileStream::Current); // Integrated
// Next double value could be the output voltage
bifs.SeekRead(8, BinaryFileStream::Current);
// Next 8 double values could be a scale factor for the amplifier (pC->V)
// Blank of 64 bytes (could be for 8 other channels?)
bifs.SeekRead(128, BinaryFileStream::Current);
// Next 8 double values could be the calibrated partial range
// Blank of 64 bytes (could be for 8 other channels?)
bifs.SeekRead(128, BinaryFileStream::Current);
// There is then 104 blank bytes
bifs.SeekRead(104, BinaryFileStream::Current);
// Initialize the output
output->Init(0,numberOfFrames,numberOfChannels);
output->SetPointFrequency(sampleFrequency);
// Then the real (float) measured values (Fx12, Fx34, Fy14, Fy23, Fz1, Fz2, Fz4) directly in newtons
// WARNING: These values are stored by channels and not by samples
int inc = 0;
const char* labels[8] = {"Fx12", "Fx34", "Fy14", "Fy23", "Fz1", "Fz2", "Fz3", "Fz4"};
for (Acquisition::AnalogIterator it = output->BeginAnalog() ; it != output->EndAnalog() ; ++it)
{
(*it)->SetLabel(labels[inc++]);
(*it)->SetUnit("N");
for (int i = 0 ; i < numberOfFrames ; ++i)
(*it)->GetValues().coeffRef(i) = -1.0 * bifs.ReadFloat(); // -1.0: BTK stores the reaction.
}
// Compute the origin and the coordinates of the corners
std::vector<float> corners(12);
std::vector<float> origin(3);
// TODO: The next lines could be factorized with the code of the method AMTIForcePlatformFileIO::computeGeometryFromDimensions
float cx = static_cast<float>(width) / 2.0f;
float cy = static_cast<float>(length) / 2.0f;
// Corners expressed in the global frame.
// The global frame is set here as: axis X going forward, axis Y on the left and axis Z going upward.
// The corners are set to have the corner #1 on the bottom left side, #2 on the top left side, #3 on the top right side and #4 on the bottom right side.
corners[0] = cx;
corners[1] = -cy;
corners[2] = 0.0f;
corners[3] = -cx;
corners[4] = -cy;
corners[5] = 0.0f;
corners[6] = -cx;
corners[7] = cy;
corners[8] = 0.0f;
corners[9] = cx;
corners[10] = cy;
corners[11] = 0.0f;
// - Origin (expressed in the global frame) and centered above the origin of the global frame
origin[0] = (float)a;
origin[1] = (float)b;
origin[2] = (float)az0;
// Create the metadata FORCE_PLATFORM
btk::MetaData::Pointer forcePlatform = btk::MetaData::New("FORCE_PLATFORM");
output->GetMetaData()->AppendChild(forcePlatform);
// - FORCE_PLATFORM:USED
forcePlatform->AppendChild(btk::MetaData::New("USED", static_cast<int16_t>(1)));
// - FORCE_PLATFORM:TYPE
forcePlatform->AppendChild(btk::MetaData::New("TYPE", std::vector<int16_t>(1,3)));
// - FORCE_PLATFORM:ZERO
std::vector<int16_t> zero(2,0); zero[0] = 1;
forcePlatform->AppendChild(btk::MetaData::New("ZERO", zero));
// - FORCE_PLATFORM:CORNERS
std::vector<uint8_t> dims(3); dims[0] = 3; dims[1] = 4; dims[2] = 1;
forcePlatform->AppendChild(btk::MetaData::New("CORNERS", dims, corners));
// - FORCE_PLATFORM:ORIGIN
dims.resize(2); dims[0] = 3; dims[1] = 1;
forcePlatform->AppendChild(btk::MetaData::New("ORIGIN", dims, origin));
// - FORCE_PLATFORM:CHANNEL
dims.resize(2); dims[0] = 8; dims[1] = 1;
std::vector<int16_t> channel(8);
for (int i = 0 ; i < 8 ; ++i)
channel[i] = i+1;
forcePlatform->AppendChild(btk::MetaData::New("CHANNEL", dims, channel));
// Add a metadata to notify that the first frame was not set.
MetaData::Pointer btkPointConfig = MetaDataCreateChild(output->GetMetaData(), "BTK_POINT_CONFIG");
MetaDataCreateChild(btkPointConfig, "NO_FIRST_FRAME", static_cast<int8_t>(1));
}
catch (BinaryFileStreamFailure& )
{
std::string excmsg;
if (bifs.EndFile())
excmsg = "Unexpected end of file.";
else if (!bifs.IsOpen())
excmsg = "Invalid file path.";
else if(bifs.Bad())
excmsg = "Loss of integrity of the file stream.";
else if(bifs.Fail())
excmsg = "Internal logic operation error on the stream associated with the file.";
else
excmsg = "Unknown error associated with the file stream.";
if (bifs.IsOpen()) bifs.Close();
throw(KistlerDATFileIOException(excmsg));
}
catch (KistlerDATFileIOException& )
{
if (bifs.IsOpen()) bifs.Close();
throw;
}
catch (std::exception& e)
{
if (bifs.IsOpen()) bifs.Close();
throw(KistlerDATFileIOException("Unexpected exception occurred: " + std::string(e.what())));
}
catch(...)
{
if (bifs.IsOpen()) bifs.Close();
throw(KistlerDATFileIOException("Unknown exception"));
}
};
/**
* Read the file designated by @a filename and fill @a output.
*/
void GRxFileIO::Read(const std::string& filename, Acquisition::Pointer output)
{
output->Reset();
IEEELittleEndianBinaryFileStream bifs;
bifs.SetExceptions(BinaryFileStream::EndFileBit | BinaryFileStream::FailBit | BinaryFileStream::BadBit);
try
{
bifs.Open(filename, BinaryFileStream::In);
uint16_t numFra = bifs.ReadU16();
double freq = static_cast<double>(bifs.ReadU16());
// Some values between the bytes 0x05 and 0x49...
// Bytes 50-51: Number of frames in the main acquisition + 1 and multiplied by 10...
// Bytes 52-53: 0x00
bifs.SeekRead(50, BinaryFileStream::Current);
// Bytes 54-55: First frame
double ff = bifs.ReadU16();
// Bytes 56-57: 0x00
// Bytes 58-59: Last frame
// Bytes 60-135 Other values ...
bifs.SeekRead(80, BinaryFileStream::Current);
// Bytes 136-139: Length
double length = bifs.ReadFloat();
// Bytes 140-143: Width
double width = bifs.ReadFloat();
// Bytes 144-147: Height
double height = bifs.ReadFloat();
// Corners 1,2,3,4: coordinates X,Y,Z
std::vector<float> cornersData = bifs.ReadFloat(3*4);
output->Init(0, numFra, 6, 1);
output->SetFirstFrame(static_cast<int>(ceil(ff / 1000.0 * freq + 1.0)));
output->SetPointFrequency(freq);
// Metadata FORCE_PLATFORM
MetaData::Pointer fp = MetaDataCreateChild(output->GetMetaData(), "FORCE_PLATFORM");
// Metadata FORCE_PLATFORM:USED
MetaDataCreateChild(fp, "USED", (int16_t)1);
// Metadata FORCE_PLATFORM:ZERO
std::vector<int16_t> zeros = std::vector<int16_t>(2,0);
MetaDataCreateChild(fp, "ZERO", zeros);
// Metadata FORCE_PLATFORM:TYPE
MetaDataCreateChild(fp, "TYPE")->SetInfo(MetaDataInfo::New(std::vector<uint8_t>(1,1), std::vector<int16_t>(1,1)));
// Metadata FORCE_PLATFORM:CORNERS
std::vector<uint8_t> cornersDim = std::vector<uint8_t>(3, 1); cornersDim[0] = 3; cornersDim[1] = 4;
MetaDataCreateChild(fp, "CORNERS")->SetInfo(MetaDataInfo::New(cornersDim, cornersData));
// Metadata FORCE_PLATFORM:ORIGIN
std::vector<uint8_t> originDim = std::vector<uint8_t>(2, 1); originDim[0] = 3;
std::vector<float> originVal = std::vector<float>(3);
originVal[0] = static_cast<float>(length / 2.0);
originVal[1] = static_cast<float>(width / 2.0);
originVal[2] = static_cast<float>(-1.0 * height / 2.0);
MetaDataCreateChild(fp, "ORIGIN")->SetInfo(MetaDataInfo::New(originDim, originVal));
// Metadata FORCE_PLATFORM:CHANNEL
std::vector<uint8_t> channelDim = std::vector<uint8_t>(2, 1); channelDim[0] = 6;
std::vector<int16_t> channelData = std::vector<int16_t>(6,0);
channelData[0] = 1; channelData[1] = 2; channelData[2] = 3; channelData[3] = 4; channelData[4] = 5; channelData[5] = 6;
MetaDataCreateChild(fp, "CHANNEL")->SetInfo(MetaDataInfo::New(channelDim, channelData));
bifs.SeekRead(512, BinaryFileStream::Begin);
btk::Wrench::Pointer fpw = btk::Wrench::New(numFra);
for (int i = 0 ; i < output->GetPointFrameNumber() ; ++i)
{
output->GetAnalog(1)->GetValues().coeffRef(i) = bifs.ReadFloat();
output->GetAnalog(0)->GetValues().coeffRef(i) = -1.0 * bifs.ReadFloat();
output->GetAnalog(2)->GetValues().coeffRef(i) = -1.0 * bifs.ReadFloat();
output->GetAnalog(4)->GetValues().coeffRef(i) = bifs.ReadFloat() - width / 2.0;
output->GetAnalog(3)->GetValues().coeffRef(i) = -1.0 * bifs.ReadFloat() + length / 2.0;
output->GetAnalog(5)->GetValues().coeffRef(i) = bifs.ReadFloat();
}
// Label channels
std::string str = std::string(1, 0x00); str[0] = *(filename.rbegin());
output->GetAnalog(0)->SetLabel("Fx" + str);
output->GetAnalog(1)->SetLabel("Fy" + str);
output->GetAnalog(2)->SetLabel("Fz" + str);
output->GetAnalog(3)->SetLabel("Px" + str);
output->GetAnalog(4)->SetLabel("Py" + str);
output->GetAnalog(5)->SetLabel("Mz" + str);
}
catch (BinaryFileStreamFailure& )
{
std::string excmsg;
if (bifs.EndFile())
excmsg = "Unexpected end of file.";
else if (!bifs.IsOpen())
excmsg = "Invalid file path.";
else if(bifs.Bad())
excmsg = "Loss of integrity of the file stream.";
else if(bifs.Fail())
excmsg = "Internal logic operation error on the stream associated with the file.";
else
excmsg = "Unknown error associated with the file stream.";
if (bifs.IsOpen()) bifs.Close();
throw(GRxFileIOException(excmsg));
}
catch (GRxFileIOException& )
{
if (bifs.IsOpen()) bifs.Close();
throw;
}
catch (std::exception& e)
{
if (bifs.IsOpen()) bifs.Close();
throw(GRxFileIOException("Unexpected exception occurred: " + std::string(e.what())));
}
catch(...)
{
if (bifs.IsOpen()) bifs.Close();
throw(GRxFileIOException("Unknown exception"));
}
};
/**
* Read the file designated by @a filename and fill @a output.
*/
void BSFFileIO::Read(const std::string& filename, Acquisition::Pointer output)
{
output->Reset();
IEEELittleEndianBinaryFileStream bifs;
bifs.SetExceptions(BinaryFileStream::EndFileBit | BinaryFileStream::FailBit | BinaryFileStream::BadBit);
try
{
bifs.Open(filename, BinaryFileStream::In);
// Main header (SMnHeaderTag)
if (bifs.ReadI32() != 100)
throw BSFFileIOException("Invalid BSF file.");
int32_t headerSize = bifs.ReadI32();
int32_t numberOfActivePlatforms = bifs.ReadI32();
int32_t numberOfActiveInstruments = bifs.ReadI32();
std::string subjectName = btkTrimString(bifs.ReadString(100));
std::string testDate = btkTrimString(bifs.ReadString(12));
std::string subjectDateOfBirth = btkTrimString(bifs.ReadString(12));
double weight = bifs.ReadDouble();
double height = bifs.ReadDouble();
std::string sex = btkTrimString(bifs.ReadString(1));
bifs.SeekRead(3, BinaryFileStream::Current); // Because of "pragma pack(4)": minimum of 4 bytes in the alignment of a member.
int32_t numberOfTrials = bifs.ReadI32();
double totaleTimeTrial = bifs.ReadDouble(); // seconds
int32_t zeroMethod = bifs.ReadI32();
int32_t weightMethod = bifs.ReadI32();
int32_t delayAfterKeystroke = bifs.ReadI32();
int32_t triggerMethod = bifs.ReadI32();
int32_t triggerPlatform = bifs.ReadI32();
int32_t preTriggerValue = bifs.ReadI32();
int32_t postTriggerValue = bifs.ReadI32();
double triggerValue = bifs.ReadDouble();
bifs.SeekRead(4, BinaryFileStream::Current); // FIXME: There is 4 extra bytes in the file used to test this reader! What are they?
int32_t rate = bifs.ReadI32();
std::string protocol = btkTrimString(bifs.ReadString(150));
std::string testType = btkTrimString(bifs.ReadString(200));
std::string commentFile = btkTrimString(bifs.ReadString(150));
std::string trialDescriptionFile = btkTrimString(bifs.ReadString(150));
std::string examinerName = btkTrimString(bifs.ReadString(100));
bifs.SeekRead(2, BinaryFileStream::Current); // WARNING: Two (2) extra bytes in the file tested. Could be for alignment?
int32_t units = bifs.ReadI32(); // 0: english, 1: metric
if (rate == 0)
throw BSFFileIOException("Invalid frame rate.");
// Instrument headers (SInstrHeaderTag)
std::vector<InstrumentHeader> instrumentHeaders(numberOfActivePlatforms + numberOfActiveInstruments);
for (int i = 0 ; i < numberOfActivePlatforms ; ++i)
this->extractInstrumentHeader(&bifs, &(instrumentHeaders[i]));
for (int i = 0 ; i < numberOfActiveInstruments ; ++i)
this->extractInstrumentHeader(&bifs, &(instrumentHeaders[i+numberOfActivePlatforms]));
// Internal check to verify the compatibility between BTK acquisition's format and data
for (size_t i = 0 ; i < instrumentHeaders.size() ; ++i)
{
if ((instrumentHeaders[i].rate != 0) && (instrumentHeaders[i].rate != rate))
throw BSFFileIOException("Unsupported file: An instrument has a different rate. Contact the developers to improve this reader.");
}
for (int i = 0 ; i < numberOfActivePlatforms ; ++i)
{
if (instrumentHeaders[i].numberOfChannels != 6)
throw BSFFileIOException("Unsupported file: A force platform has more than 6 channels. Contact the developers to improve this reader.");
}
// Init
int totalNumberOfChannels = 0;
for (size_t i = 0 ; i < instrumentHeaders.size() ; ++i)
totalNumberOfChannels += instrumentHeaders[i].numberOfChannels;
double* scale = new double[totalNumberOfChannels]; // array to transform ADC values to real values
size_t inc = 0;
for (size_t i = 0 ; i < instrumentHeaders.size() ; ++i)
{
for (int j = 0 ; j < instrumentHeaders[i].numberOfChannels ; ++j)
scale[j+inc] = 1000000.0 / (instrumentHeaders[i].sensitivity[j] * instrumentHeaders[i].amplifierGain[j] * instrumentHeaders[i].excitationVoltage[j] * instrumentHeaders[i].acquisitionCardRange[j]);
inc += instrumentHeaders[i].numberOfChannels;
}
output->Init(0, static_cast<int>(totaleTimeTrial * static_cast<double>(rate)), totalNumberOfChannels);
output->SetPointFrequency(static_cast<double>(rate));
if (units == 0) // english
{
output->SetPointUnit(Point::Marker, "in");
output->SetPointUnit(Point::Force, "lb");
output->SetPointUnit(Point::Moment, "in-lb");
}
else
{
// The FP length/width seems to be set everytime in inch even if the header is set
// to metric units (so only used for measured value?).
for (size_t i = 0 ; i < instrumentHeaders.size() ; ++i)
{
// Convert from inch to meter
instrumentHeaders[i].length *= 0.0254f;
instrumentHeaders[i].width *= 0.0254f;
instrumentHeaders[i].offset[0] *= 0.0254f;
instrumentHeaders[i].offset[1] *= 0.0254f;
instrumentHeaders[i].offset[2] *= 0.0254f;
}
// Same for the content of the measure. The BSF file format seems to save the data in pound and pound-inch
for (int i = 0 ; i < numberOfActivePlatforms ; ++i)
{
scale[i*6] *= 4.4482216152605;
scale[i*6+1] *= 4.4482216152605;
scale[i*6+2] *= 4.4482216152605;
scale[i*6+3] *= 0.1129848290276167;
scale[i*6+4] *= 0.1129848290276167;
scale[i*6+5] *= 0.1129848290276167;
}
output->SetPointUnit(Point::Marker, "m");
output->SetPointUnit(Point::Force, "N");
output->SetPointUnit(Point::Moment, "Nm");
}
Acquisition::AnalogIterator it = output->BeginAnalog();
std::vector<float> corners(12*numberOfActivePlatforms, 0.0f);
std::vector<float> origin(3*numberOfActivePlatforms, 0.0f);
std::vector<int16_t> channel(6*numberOfActivePlatforms);
std::string suffix = ((numberOfActivePlatforms == 1) ? "" : "1");
float globalOrigin[3] = {0.0f, 0.0f, 0.0f};
int numToAdaptChannelIndex = 0;
for (int i = 0 ; i < numberOfActivePlatforms ; ++i)
{
(*it)->SetLabel("Fx" + suffix);
(*it)->SetUnit(output->GetPointUnit(Point::Force));
(*it)->SetScale(scale[i*6]);
++it;
(*it)->SetLabel("Fy" + suffix);
(*it)->SetUnit(output->GetPointUnit(Point::Force));
(*it)->SetScale(scale[i*6+1]);
++it;
(*it)->SetLabel("Fz" + suffix);
(*it)->SetUnit(output->GetPointUnit(Point::Force));
(*it)->SetScale(scale[i*6+2]);
++it;
(*it)->SetLabel("Mx" + suffix);
(*it)->SetUnit(output->GetPointUnit(Point::Moment));
(*it)->SetScale(scale[i*6+3]);
++it;
(*it)->SetLabel("My" + suffix);
(*it)->SetUnit(output->GetPointUnit(Point::Moment));
(*it)->SetScale(scale[i*6+4]);
++it;
(*it)->SetLabel("Mz" + suffix);
(*it)->SetUnit(output->GetPointUnit(Point::Moment));
(*it)->SetScale(scale[i*6+5]);
++it;
if (i > 0)
{
if ((instrumentHeaders[i].interDistance[0] == 0.0f) && (instrumentHeaders[i].interDistance[1] == 0.0f) && (instrumentHeaders[i].interDistance[2] == 0.0f))
{
btkWarningMacro(filename, "The distance with the previous force platform is set to 0. The platform is automatically shifted in the front of the previous. You might have to modify the origin of the force platform #" + ToString(i) + "in the metadata FORCE_PLATFORM:ORIGIN to locate it correctly in the global frame.");
instrumentHeaders[i].interDistance[1] = static_cast<float>(instrumentHeaders[i].length + instrumentHeaders[i-1].length) / 2.0f;
}
}
globalOrigin[0] += instrumentHeaders[i].interDistance[0];
globalOrigin[1] += instrumentHeaders[i].interDistance[1];
globalOrigin[2] += instrumentHeaders[i].interDistance[2];
this->extractConfiguration(&(instrumentHeaders[i]), globalOrigin, &(channel[i*6]), &(corners[i*12]), &(origin[i*3]));
for (int j = 0 ; j < 6 ; ++j)
channel[i*6+j] += numToAdaptChannelIndex;
numToAdaptChannelIndex += instrumentHeaders[i].numberOfChannels;
suffix = ToString(i+2);
}
// Create the metadata FORCE_PLATFORM
btk::MetaData::Pointer forcePlatform = btk::MetaData::New("FORCE_PLATFORM");
output->GetMetaData()->AppendChild(forcePlatform);
// - FORCE_PLATFORM:USED
forcePlatform->AppendChild(btk::MetaData::New("USED", static_cast<int16_t>(numberOfActivePlatforms)));
// - FORCE_PLATFORM:TYPE
forcePlatform->AppendChild(btk::MetaData::New("TYPE", std::vector<int16_t>(numberOfActivePlatforms,2)));
// - FORCE_PLATFORM:ZERO
std::vector<int16_t> zero(2,0); zero[0] = 1;
forcePlatform->AppendChild(btk::MetaData::New("ZERO", zero));
// - FORCE_PLATFORM:CORNERS
std::vector<uint8_t> dims(3); dims[0] = 3; dims[1] = 4; dims[2] = numberOfActivePlatforms;
forcePlatform->AppendChild(btk::MetaData::New("CORNERS", dims, corners));
// - FORCE_PLATFORM:ORIGIN
dims.resize(2); dims[0] = 3; dims[1] = numberOfActivePlatforms;
forcePlatform->AppendChild(btk::MetaData::New("ORIGIN", dims, origin));
// - FORCE_PLATFORM:CHANNEL
dims.resize(2); dims[0] = 6; dims[1] = numberOfActivePlatforms;
forcePlatform->AppendChild(btk::MetaData::New("CHANNEL", dims, channel));
// - FORCE_PLATFORM:CAL_MATRIX
dims.resize(3); dims[0] = 6; dims[1] = 6; dims[2] = 0;
forcePlatform->AppendChild(btk::MetaData::New("CAL_MATRIX", dims, std::vector<float>()));
// Add a metadata to notify that the first frame was not set.
MetaData::Pointer btkPointConfig = MetaDataCreateChild(output->GetMetaData(), "BTK_POINT_CONFIG");
MetaDataCreateChild(btkPointConfig, "NO_FIRST_FRAME", static_cast<int8_t>(1));
// Data
// Note: We want the reaction of the measure, so all the data are multiplied by -1.
for (int i = 0 ; i < output->GetAnalogFrameNumber() ; ++i)
{
int inc = 0;
for (Acquisition::AnalogIterator it = output->BeginAnalog() ; it != output->EndAnalog() ; ++it)
(*it)->GetValues().coeffRef(i) = -1.0f * static_cast<double>(bifs.ReadI16()) * scale[inc++];
}
// Cleaning
delete[] scale;
}
catch (BinaryFileStreamFailure& )
{
std::string excmsg;
if (bifs.EndFile())
excmsg = "Unexpected end of file.";
else if (!bifs.IsOpen())
excmsg = "Invalid file path.";
else if(bifs.Bad())
excmsg = "Loss of integrity of the file stream.";
else if(bifs.Fail())
excmsg = "Internal logic operation error on the stream associated with the file.";
else
excmsg = "Unknown error associated with the file stream.";
if (bifs.IsOpen()) bifs.Close();
throw(BSFFileIOException(excmsg));
}
catch (BSFFileIOException& )
{
if (bifs.IsOpen()) bifs.Close();
throw;
}
catch (std::exception& e)
{
if (bifs.IsOpen()) bifs.Close();
throw(BSFFileIOException("Unexpected exception occurred: " + std::string(e.what())));
}
catch(...)
{
if (bifs.IsOpen()) bifs.Close();
throw(BSFFileIOException("Unknown exception"));
}
};