void ViewProviderDrawingView::onChanged(const App::Property *prop)
{
App::DocumentObject* obj = getObject();
if (!obj || obj->isRestoring()) {
Gui::ViewProviderDocumentObject::onChanged(prop);
return;
}
if (prop == &Visibility) {
if(Visibility.getValue()) {
show();
} else {
hide();
}
} else if (prop == &KeepLabel) {
QGIView* qgiv = getQView();
if (qgiv) {
qgiv->updateView(true);
}
}
Gui::ViewProviderDocumentObject::onChanged(prop);
}
void DrawViewSection::onChanged(const App::Property* prop)
{
if (!isRestoring()) {
//Base::Console().Message("TRACE - DVS::onChanged(%s) - %s\n",prop->getName(),Label.getValue());
if (prop == &SectionSymbol) {
std::string lblText = "Section " +
std::string(SectionSymbol.getValue()) +
" - " +
std::string(SectionSymbol.getValue());
Label.setValue(lblText);
}
if (prop == &SectionOrigin) {
App::DocumentObject* base = BaseView.getValue();
if (base != nullptr) {
base->touch();
}
}
}
if (prop == &FileHatchPattern ||
prop == &NameGeomPattern ) {
if ((!FileHatchPattern.isEmpty()) &&
(!NameGeomPattern.isEmpty())) {
std::vector<PATLineSpec> specs =
DrawGeomHatch::getDecodedSpecsFromFile(FileHatchPattern.getValue(),NameGeomPattern.getValue());
m_lineSets.clear();
for (auto& hl: specs) {
//hl.dump("hl from section");
LineSet ls;
ls.setPATLineSpec(hl);
m_lineSets.push_back(ls);
}
}
}
DrawView::onChanged(prop);
}
const bool TaskTransformedParameters::originalSelected(const Gui::SelectionChanges& msg)
{
if (msg.Type == Gui::SelectionChanges::AddSelection && originalSelectionMode) {
if (strcmp(msg.pDocName, getObject()->getDocument()->getName()) != 0)
return false;
PartDesign::Transformed* pcTransformed = getObject();
App::DocumentObject* selectedObject = pcTransformed->getDocument()->getObject(msg.pObjectName);
if (selectedObject->isDerivedFrom(PartDesign::Additive::getClassTypeId()) ||
selectedObject->isDerivedFrom(PartDesign::Subtractive::getClassTypeId())) {
// Do the same like in TaskDlgTransformedParameters::accept() but without doCommand
std::vector<App::DocumentObject*> originals(1,selectedObject);
pcTransformed->Originals.setValues(originals);
recomputeFeature();
originalSelectionMode = false;
return true;
}
}
return false;
}
void ViewProviderDatum::attach(App::DocumentObject *obj)
{
ViewProviderGeometryObject::attach ( obj );
// TODO remove this field (2015-09-08, Fat-Zer)
App::DocumentObject* o = getObject();
if (o->getTypeId() == PartDesign::Plane::getClassTypeId())
datumType = QObject::tr("Plane");
else if (o->getTypeId() == PartDesign::Line::getClassTypeId())
datumType = QObject::tr("Line");
else if (o->getTypeId() == PartDesign::Point::getClassTypeId())
datumType = QObject::tr("Point");
else if (o->getTypeId() == PartDesign::CoordinateSystem::getClassTypeId())
datumType = QObject::tr("CoordinateSystem");
SoShapeHints* hints = new SoShapeHints();
hints->shapeType.setValue(SoShapeHints::UNKNOWN_SHAPE_TYPE);
hints->vertexOrdering.setValue(SoShapeHints::COUNTERCLOCKWISE);
SoDrawStyle* fstyle = new SoDrawStyle();
fstyle->style = SoDrawStyle::FILLED;
fstyle->lineWidth = 3;
fstyle->pointSize = 5;
pPickStyle->style = SoPickStyle::SHAPE;
SoMaterialBinding* matBinding = new SoMaterialBinding;
matBinding->value = SoMaterialBinding::OVERALL;
SoSeparator* sep = new SoSeparator();
sep->addChild(hints);
sep->addChild(fstyle);
sep->addChild(pPickStyle);
sep->addChild(matBinding);
sep->addChild(pcShapeMaterial);
sep->addChild(pShapeSep);
addDisplayMaskMode(sep, "Base");
}
void CmdPartDesignMoveTip::activated(int iMsg)
{
Q_UNUSED(iMsg);
std::vector<App::DocumentObject*> features = getSelection().getObjectsOfType(
Part::Feature::getClassTypeId() );
App::DocumentObject* selFeature;
PartDesign::Body* body= nullptr;
if ( features.size() == 1 ) {
selFeature = features.front();
if ( selFeature->getTypeId().isDerivedFrom ( PartDesign::Body::getClassTypeId() ) ) {
body = static_cast<PartDesign::Body *> ( selFeature );
} else {
body = PartDesignGui::getBodyFor ( selFeature, /* messageIfNot =*/ false );
}
} else {
selFeature = nullptr;
}
if (!selFeature) {
QMessageBox::warning (0, QObject::tr( "Selection error" ),
QObject::tr( "Select exactly one PartDesign feature or a body." ) );
return;
} else if (!body) {
QMessageBox::warning (0, QObject::tr( "Selection error" ),
QObject::tr( "Couldn't determine a body for the selected feature '%s'.", selFeature->Label.getValue() ) );
return;
} else if ( !selFeature->isDerivedFrom(PartDesign::Feature::getClassTypeId () ) &&
selFeature != body && body->BaseFeature.getValue() != selFeature ) {
QMessageBox::warning (0, QObject::tr( "Selection error" ),
QObject::tr( "Only a solid feature can be the tip of a body." ) );
return;
}
App::DocumentObject* oldTip = body->Tip.getValue();
if (oldTip == selFeature) { // it's not generally an error, so print only a console message
Base::Console().Message ("%s is already the tip of the body", selFeature->getNameInDocument () );
return;
}
openCommand("Move tip to selected feature");
if (selFeature == body) {
doCommand(Doc,"App.activeDocument().%s.Tip = None", body->getNameInDocument());
} else {
doCommand(Doc,"App.activeDocument().%s.Tip = App.activeDocument().%s",body->getNameInDocument(),
selFeature->getNameInDocument());
// Adjust visibility to show only the Tip feature
doCommand(Gui,"Gui.activeDocument().show(\"%s\")", selFeature->getNameInDocument());
}
// TOOD: Hide all datum features after the Tip feature? But the user might have already hidden some and wants to see
// others, so we would have to remember their state somehow
updateActive();
}
Private(ViewProviderPartExt* vp) : ui(new Ui_TaskFaceColors()), view(0), vp(vp)
{
obj = vp->getObject();
doc = Gui::Application::Instance->getDocument(obj->getDocument());
// build up map edge->face
TopTools_IndexedMapOfShape mapOfShape;
TopExp_Explorer xp(static_cast<Part::Feature*>(obj)->Shape.getValue(), TopAbs_FACE);
while (xp.More()) {
mapOfShape.Add(xp.Current());
xp.Next();
}
current = vp->DiffuseColor.getValues();
if (current.empty())
current.push_back(vp->ShapeColor.getValue());
perface = current;
perface.resize(mapOfShape.Extent(), perface.front());
}
void ShapeBinder::slotChangedObject(const App::DocumentObject& Obj, const App::Property& Prop)
{
App::Document* doc = getDocument();
if (!doc || doc->testStatus(App::Document::Restoring))
return;
if (this == &Obj)
return;
if (!TraceSupport.getValue())
return;
if (!Prop.getTypeId().isDerivedFrom(App::PropertyPlacement::getClassTypeId()))
return;
Part::Feature* obj = nullptr;
std::vector<std::string> subs;
ShapeBinder::getFilteredReferences(&Support, obj, subs);
if (obj) {
if (obj == &Obj) {
// the directly referenced object has changed
enforceRecompute();
}
else if (Obj.hasExtension(App::GroupExtension::getExtensionClassTypeId())) {
// check if the changed property belongs to a group-like object
// like Body or Part
std::vector<App::DocumentObject*> chain;
std::vector<App::DocumentObject*> list = getInListRecursive();
chain.insert(chain.end(), list.begin(), list.end());
list = obj->getInListRecursive();
chain.insert(chain.end(), list.begin(), list.end());
auto it = std::find(chain.begin(), chain.end(), &Obj);
if (it != chain.end()) {
enforceRecompute();
}
}
}
}
App::DocumentObjectExecReturn *Revolution::execute(void)
{
App::DocumentObject* link = Sketch.getValue();
if (!link)
return new App::DocumentObjectExecReturn("No sketch linked");
if (!link->getTypeId().isDerivedFrom(Part::Part2DObject::getClassTypeId()))
return new App::DocumentObjectExecReturn("Linked object is not a Sketch or Part2DObject");
Part::Part2DObject* pcSketch=static_cast<Part::Part2DObject*>(link);
TopoDS_Shape shape = pcSketch->Shape.getShape()._Shape;
if (shape.IsNull())
return new App::DocumentObjectExecReturn("Linked shape object is empty");
// this is a workaround for an obscure OCC bug which leads to empty tessellations
// for some faces. Making an explicit copy of the linked shape seems to fix it.
// The error only happens when re-computing the shape.
if (!this->Shape.getValue().IsNull()) {
BRepBuilderAPI_Copy copy(shape);
shape = copy.Shape();
if (shape.IsNull())
return new App::DocumentObjectExecReturn("Linked shape object is empty");
}
TopExp_Explorer ex;
std::vector<TopoDS_Wire> wires;
for (ex.Init(shape, TopAbs_WIRE); ex.More(); ex.Next()) {
wires.push_back(TopoDS::Wire(ex.Current()));
}
if (wires.empty()) // there can be several wires
return new App::DocumentObjectExecReturn("Linked shape object is not a wire");
// get the Sketch plane
Base::Placement SketchPlm = pcSketch->Placement.getValue();
// get reference axis
App::DocumentObject *pcReferenceAxis = ReferenceAxis.getValue();
const std::vector<std::string> &subReferenceAxis = ReferenceAxis.getSubValues();
if (pcReferenceAxis && pcReferenceAxis == pcSketch) {
bool hasValidAxis=false;
Base::Axis axis;
if (subReferenceAxis[0] == "V_Axis") {
hasValidAxis = true;
axis = pcSketch->getAxis(Part::Part2DObject::V_Axis);
}
else if (subReferenceAxis[0] == "H_Axis") {
hasValidAxis = true;
axis = pcSketch->getAxis(Part::Part2DObject::H_Axis);
}
else if (subReferenceAxis[0].size() > 4 && subReferenceAxis[0].substr(0,4) == "Axis") {
int AxId = std::atoi(subReferenceAxis[0].substr(4,4000).c_str());
if (AxId >= 0 && AxId < pcSketch->getAxisCount()) {
hasValidAxis = true;
axis = pcSketch->getAxis(AxId);
}
}
if (hasValidAxis) {
axis *= SketchPlm;
Base::Vector3d base=axis.getBase();
Base::Vector3d dir=axis.getDirection();
Base.setValue(base.x,base.y,base.z);
Axis.setValue(dir.x,dir.y,dir.z);
}
}
// get revolve axis
Base::Vector3f b = Base.getValue();
gp_Pnt pnt(b.x,b.y,b.z);
Base::Vector3f v = Axis.getValue();
gp_Dir dir(v.x,v.y,v.z);
// get the support of the Sketch if any
App::DocumentObject* pcSupport = pcSketch->Support.getValue();
Part::Feature *SupportObject = 0;
if (pcSupport && pcSupport->getTypeId().isDerivedFrom(Part::Feature::getClassTypeId()))
SupportObject = static_cast<Part::Feature*>(pcSupport);
TopoDS_Shape aFace = makeFace(wires);
if (aFace.IsNull())
return new App::DocumentObjectExecReturn("Creating a face from sketch failed");
// Rotate the face by half the angle to get revolution symmetric to sketch plane
if (Midplane.getValue()) {
gp_Trsf mov;
mov.SetRotation(gp_Ax1(pnt, dir), Base::toRadians<double>(Angle.getValue()) * (-1.0) / 2.0);
TopLoc_Location loc(mov);
aFace.Move(loc);
}
this->positionBySketch();
TopLoc_Location invObjLoc = this->getLocation().Inverted();
pnt.Transform(invObjLoc.Transformation());
dir.Transform(invObjLoc.Transformation());
// Reverse angle if selected
double angle = Base::toRadians<double>(Angle.getValue());
if (Reversed.getValue() && !Midplane.getValue())
angle *= (-1.0);
try {
// revolve the face to a solid
BRepPrimAPI_MakeRevol RevolMaker(aFace.Moved(invObjLoc), gp_Ax1(pnt, dir), angle);
if (RevolMaker.IsDone()) {
TopoDS_Shape result = RevolMaker.Shape();
// if the sketch has a support fuse them to get one result object (PAD!)
if (SupportObject) {
const TopoDS_Shape& support = SupportObject->Shape.getValue();
if (!support.IsNull() && support.ShapeType() == TopAbs_SOLID) {
// set the additive shape property for later usage in e.g. pattern
this->AddShape.setValue(result);
// Let's call algorithm computing a fuse operation:
BRepAlgoAPI_Fuse mkFuse(support.Moved(invObjLoc), result);
// Let's check if the fusion has been successful
if (!mkFuse.IsDone())
throw Base::Exception("Fusion with support failed");
result = mkFuse.Shape();
}
}
this->Shape.setValue(result);
}
else
return new App::DocumentObjectExecReturn("Could not revolve the sketch!");
return App::DocumentObject::StdReturn;
}
catch (Standard_Failure) {
Handle_Standard_Failure e = Standard_Failure::Caught();
return new App::DocumentObjectExecReturn(e->GetMessageString());
}
}
void CmdPartDesignMoveFeatureInTree::activated(int iMsg)
{
Q_UNUSED(iMsg);
std::vector<App::DocumentObject*> features = getSelection().getObjectsOfType(Part::Feature::getClassTypeId());
if (features.empty()) return;
PartDesign::Body *body = PartDesignGui::getBodyFor ( features.front(), false );
App::DocumentObject * bodyBase = nullptr;
// sanity check
bool allFeaturesFromSameBody = true;
if ( body ) {
bodyBase= body->BaseFeature.getValue();
for ( auto feat: features ) {
if ( !body->hasObject ( feat ) ) {
allFeaturesFromSameBody = false;
break;
}
if ( bodyBase== feat) {
QMessageBox::warning (0, QObject::tr( "Selection error" ),
QObject::tr( "Impossible to move the base feature of a body." ) );
return;
}
}
}
if (!body || ! allFeaturesFromSameBody) {
QMessageBox::warning (0, QObject::tr( "Selection error" ),
QObject::tr( "Select one or more features from the same body." ) );
return;
}
// Create a list of all features in this body
const std::vector<App::DocumentObject*> & model = body->Group.getValues();
// Ask user to select the target feature
bool ok;
QStringList items;
if ( bodyBase ) {
items.push_back( QString::fromUtf8 ( bodyBase->Label.getValue () ) );
} else {
items.push_back( QObject::tr( "Beginning of the body" ) );
}
for ( auto feat: model ) {
items.push_back( QString::fromUtf8 ( feat->Label.getValue() ) );
}
QString text = QInputDialog::getItem(Gui::getMainWindow(),
qApp->translate("PartDesign_MoveFeatureInTree", "Select feature"),
qApp->translate("PartDesign_MoveFeatureInTree", "Select a feature from the list"),
items, 0, false, &ok);
if (!ok) return;
int index = items.indexOf(text);
// first object is the beginning of the body
App::DocumentObject* target = index != 0 ? model[index-1] : nullptr;
openCommand("Move an object inside tree");
for ( auto feat: features ) {
if ( feat == target ) continue;
std::string targetStr;
if (target) {
targetStr.append("App.activeDocument().").append(target->getNameInDocument());
} else {
targetStr = "None";
}
// Remove and re-insert the feature to/from the Body
// TODO if tip was moved the new position of tip is quite undetermined (2015-08-07, Fat-Zer)
// TODO warn the user if we are moving an object to some place before the object's link (2015-08-07, Fat-Zer)
doCommand ( Doc,"App.activeDocument().%s.removeObject(App.activeDocument().%s)",
body->getNameInDocument(), feat->getNameInDocument() );
doCommand ( Doc, "App.activeDocument().%s.insertObject(App.activeDocument().%s, %s, True)",
body->getNameInDocument(), feat->getNameInDocument(), targetStr.c_str () );
}
updateActive();
}
void CmdPartDesignMoveFeature::activated(int iMsg)
{
Q_UNUSED(iMsg);
std::vector<App::DocumentObject*> features = getSelection().getObjectsOfType(Part::Feature::getClassTypeId());
if (features.empty()) return;
// Check if all features are valid to move
if (std::any_of(std::begin(features), std::end(features), [](App::DocumentObject* obj){return !PartDesignGui::isFeatureMovable(obj); }))
{
//show messagebox and cancel
QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Features cannot be moved"),
QObject::tr("Some of the selected features have dependencies in the source body"));
return;
}
// Collect dependenies of the selected features
std::vector<App::DocumentObject*> dependencies = PartDesignGui::collectMovableDependencies(features);
if (!dependencies.empty())
features.insert(std::end(features), std::begin(dependencies), std::end(dependencies));
// Create a list of all bodies in this part
std::vector<App::DocumentObject*> bodies = getDocument()->getObjectsOfType(Part::BodyBase::getClassTypeId());
std::set<App::DocumentObject*> source_bodies;
for (auto feat : features) {
PartDesign::Body* source = PartDesign::Body::findBodyOf(feat);
source_bodies.insert(static_cast<App::DocumentObject*>(source));
}
std::vector<App::DocumentObject*> target_bodies;
for (auto body : bodies) {
if (!source_bodies.count(body))
target_bodies.push_back(body);
}
if (target_bodies.empty())
{
QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Features cannot be moved"),
QObject::tr("There are no other bodies to move to"));
return;
}
// Ask user to select the target body (remove source bodies from list)
bool ok;
QStringList items;
for (auto body : target_bodies) {
items.push_back(QString::fromUtf8(body->Label.getValue()));
}
QString text = QInputDialog::getItem(Gui::getMainWindow(),
qApp->translate("PartDesign_MoveFeature", "Select body"),
qApp->translate("PartDesign_MoveFeature", "Select a body from the list"),
items, 0, false, &ok);
if (!ok) return;
int index = items.indexOf(text);
if (index < 0) return;
PartDesign::Body* target = static_cast<PartDesign::Body*>(target_bodies[index]);
openCommand("Move an object");
for (auto feat: features) {
// Find body of this feature
Part::BodyBase* source = PartDesign::Body::findBodyOf(feat);
bool featureWasTip = false;
if (source == target) continue;
// Remove from the source body if the feature belonged to a body
if (source) {
featureWasTip = (source->Tip.getValue() == feat);
doCommand(Doc,"App.activeDocument().%s.removeObject(App.activeDocument().%s)",
source->getNameInDocument(), (feat)->getNameInDocument());
}
App::DocumentObject* targetOldTip = target->Tip.getValue();
// Add to target body (always at the Tip)
doCommand(Doc,"App.activeDocument().%s.addObject(App.activeDocument().%s)",
target->getNameInDocument(), (feat)->getNameInDocument());
// Recompute to update the shape
doCommand(Gui,"App.activeDocument().recompute()");
// Adjust visibility of features
// TODO: May be something can be done in view provider (2015-08-05, Fat-Zer)
// If we removed the tip of the source body, make the new tip visible
if ( featureWasTip ) {
App::DocumentObject * sourceNewTip = source->Tip.getValue();
if (sourceNewTip)
doCommand(Gui,"Gui.activeDocument().show(\"%s\")", sourceNewTip->getNameInDocument());
}
// Hide old tip and show new tip (the moved feature) of the target body
App::DocumentObject* targetNewTip = target->Tip.getValue();
if ( targetOldTip != targetNewTip ) {
if ( targetOldTip ) {
doCommand(Gui,"Gui.activeDocument().hide(\"%s\")", targetOldTip->getNameInDocument());
}
if (targetNewTip) {
doCommand(Gui,"Gui.activeDocument().show(\"%s\")", targetNewTip->getNameInDocument());
}
}
// Fix sketch support
if (feat->getTypeId().isDerivedFrom(Sketcher::SketchObject::getClassTypeId())) {
Sketcher::SketchObject *sketch = static_cast<Sketcher::SketchObject*>(feat);
try {
PartDesignGui::fixSketchSupport(sketch);
} catch (Base::Exception &) {
QMessageBox::warning( Gui::getMainWindow(), QObject::tr("Sketch plane cannot be migrated"),
QObject::tr("Please edit '%1' and redefine it to use a Base or Datum plane as the sketch plane.").
arg( QString::fromLatin1( sketch->Label.getValue () ) ) );
}
}
//relink origin for sketches and datums (coordinates)
PartDesignGui::relinkToOrigin(feat, target);
}
updateActive();
}
const std::list<gp_Trsf> PolarPattern::getTransformations(const std::vector<App::DocumentObject*>)
{
float angle = Angle.getValue();
if (angle < Precision::Confusion())
throw Base::Exception("Pattern angle too small");
int occurrences = Occurrences.getValue();
if (occurrences < 2)
throw Base::Exception("At least two occurrences required");
bool reversed = Reversed.getValue();
double offset;
if (std::abs(angle - 360.0) < Precision::Confusion())
offset = Base::toRadians<double>(angle) / occurrences; // Because e.g. two occurrences in 360 degrees need to be 180 degrees apart
else
offset = Base::toRadians<double>(angle) / (occurrences - 1);
App::DocumentObject* refObject = Axis.getValue();
if (refObject == NULL)
throw Base::Exception("No axis reference specified");
if (!refObject->getTypeId().isDerivedFrom(Part::Feature::getClassTypeId()))
throw Base::Exception("Axis reference must be edge of a feature");
std::vector<std::string> subStrings = Axis.getSubValues();
if (subStrings.empty() || subStrings[0].empty())
throw Base::Exception("No axis reference specified");
gp_Pnt axbase;
gp_Dir axdir;
if (refObject->getTypeId().isDerivedFrom(Part::Part2DObject::getClassTypeId())) {
Part::Part2DObject* refSketch = static_cast<Part::Part2DObject*>(refObject);
Base::Axis axis;
if (subStrings[0] == "H_Axis")
axis = refSketch->getAxis(Part::Part2DObject::H_Axis);
else if (subStrings[0] == "V_Axis")
axis = refSketch->getAxis(Part::Part2DObject::V_Axis);
else if (subStrings[0] == "N_Axis")
axis = refSketch->getAxis(Part::Part2DObject::N_Axis);
else if (subStrings[0].size() > 4 && subStrings[0].substr(0,4) == "Axis") {
int AxId = std::atoi(subStrings[0].substr(4,4000).c_str());
if (AxId >= 0 && AxId < refSketch->getAxisCount())
axis = refSketch->getAxis(AxId);
}
axis *= refSketch->Placement.getValue();
axbase = gp_Pnt(axis.getBase().x, axis.getBase().y, axis.getBase().z);
axdir = gp_Dir(axis.getDirection().x, axis.getDirection().y, axis.getDirection().z);
} else {
Part::Feature* refFeature = static_cast<Part::Feature*>(refObject);
Part::TopoShape refShape = refFeature->Shape.getShape();
TopoDS_Shape ref = refShape.getSubShape(subStrings[0].c_str());
if (ref.ShapeType() == TopAbs_EDGE) {
TopoDS_Edge refEdge = TopoDS::Edge(ref);
if (refEdge.IsNull())
throw Base::Exception("Failed to extract axis edge");
BRepAdaptor_Curve adapt(refEdge);
if (adapt.GetType() != GeomAbs_Line)
throw Base::Exception("Axis edge must be a straight line");
axbase = adapt.Value(adapt.FirstParameter());
axdir = adapt.Line().Direction();
} else {
throw Base::Exception("Axis reference must be an edge");
}
}
TopLoc_Location invObjLoc = this->getLocation().Inverted();
axbase.Transform(invObjLoc.Transformation());
axdir.Transform(invObjLoc.Transformation());
gp_Ax2 axis(axbase, axdir);
if (reversed)
axis.SetDirection(axis.Direction().Reversed());
// Note: The original feature is NOT included in the list of transformations! Therefore
// we start with occurrence number 1, not number 0
std::list<gp_Trsf> transformations;
gp_Trsf trans;
transformations.push_back(trans); // identity transformation
for (int i = 1; i < occurrences; i++) {
trans.SetRotation(axis.Axis(), i * offset);
transformations.push_back(trans);
}
return transformations;
}
App::DocumentObjectExecReturn *FeatureViewPart::execute(void)
{
std::stringstream result;
std::string ViewName = Label.getValue();
App::DocumentObject* link = Source.getValue();
if (!link)
return new App::DocumentObjectExecReturn("No object linked");
if (!link->getTypeId().isDerivedFrom(Part::Feature::getClassTypeId()))
return new App::DocumentObjectExecReturn("Linked object is not a Part object");
TopoDS_Shape shape = static_cast<Part::Feature*>(link)->Shape.getShape()._Shape;
if (shape.IsNull())
return new App::DocumentObjectExecReturn("Linked shape object is empty");
Handle( HLRBRep_Algo ) brep_hlr = new HLRBRep_Algo;
brep_hlr->Add( shape );
gp_Ax2 transform(gp_Pnt(0,0,0),gp_Dir(0,0,1));
HLRAlgo_Projector projector( transform );
brep_hlr->Projector( projector );
brep_hlr->Update();
brep_hlr->Hide();
// extracting the result sets:
HLRBRep_HLRToShape shapes( brep_hlr );
TopoDS_Shape VisiblyEdges;
VisiblyEdges = shapes.VCompound();
TopoDS_Shape HiddenEdges;
HiddenEdges = shapes.HCompound();
BRepMesh::Mesh(VisiblyEdges,0.1);
//HLRBRep_HLRToShape Tool(Hider);
//TopoDS_Shape V = Tool.VCompound ();// artes vives vues
//TopoDS_Shape V1 = Tool.Rg1LineVCompound();// artes rgulires vues
//TopoDS_Shape VN = Tool.RgNLineVCompound();// artes de couture vues
//TopoDS_Shape VO = Tool.OutLineVCompound();// contours apparents vus
//TopoDS_Shape VI = Tool.IsoLineVCompound();// isoparamtriques vues
//TopoDS_Shape H = Tool.HCompound ();// artes vives caches
//TopoDS_Shape H1 = Tool.Rg1LineHCompound();// artes rgulires caches
//TopoDS_Shape HN = Tool.RgNLineHCompound();// artes de couture caches
//TopoDS_Shape HO = Tool.OutLineHCompound();// contours apparents cachs
//TopoDS_Shape HI = Tool.IsoLineHCompound();// isoparamtriques caches
result << "<g"
<< " id=\"" << ViewName << "\"" << endl
<< " stroke=\"rgb(0, 0, 0)\"" << endl
<< " stroke-width=\"0.35\"" << endl
<< " stroke-linecap=\"butt\"" << endl
<< " stroke-linejoin=\"miter\"" << endl
<< " transform=\"translate("<< X.getValue()<<","<<Y.getValue()<<") scale("<< Scale.getValue()<<","<<Scale.getValue()<<")\"" << endl
<< " fill=\"none\"" << endl
<< " >" << endl;
TopExp_Explorer edges( VisiblyEdges, TopAbs_EDGE );
for (int i = 1 ; edges.More(); edges.Next(),i++ ) {
TopoDS_Edge edge = TopoDS::Edge( edges.Current() );
TopLoc_Location location;
Handle( Poly_Polygon3D ) polygon = BRep_Tool::Polygon3D( edge, location );
if ( !polygon.IsNull() ) {
const TColgp_Array1OfPnt& nodes = polygon->Nodes();
char c = 'M';
result << "<path id= \"" << ViewName << i << "\" d=\" ";
for ( int i = nodes.Lower(); i<= nodes.Upper(); i++ ){
result << c << " " << nodes(i).X() << " " << nodes(i).Y()<< " " ;
c = 'L';
}
result << "\" />" << endl;
}
}
result << "</g>" << endl;
// Apply the resulting fragment
ViewResult.setValue(result.str().c_str());
return App::DocumentObject::StdReturn;
}
bool SweepWidget::accept()
{
if (d->loop.isRunning())
return false;
Gui::SelectionFilter edgeFilter ("SELECT Part::Feature SUBELEMENT Edge COUNT 1..");
Gui::SelectionFilter partFilter ("SELECT Part::Feature COUNT 1");
bool matchEdge = edgeFilter.match();
bool matchPart = partFilter.match();
if (!matchEdge && !matchPart) {
QMessageBox::critical(this, tr("Sweep path"), tr("Select one or more connected edges you want to sweep along."));
return false;
}
// get the selected object
std::string selection;
std::string spineObject, spineLabel;
const std::vector<Gui::SelectionObject>& result = matchEdge
? edgeFilter.Result[0] : partFilter.Result[0];
selection = result.front().getAsPropertyLinkSubString();
spineObject = result.front().getFeatName();
spineLabel = result.front().getObject()->Label.getValue();
QString list, solid, frenet;
if (d->ui.checkSolid->isChecked())
solid = QString::fromLatin1("True");
else
solid = QString::fromLatin1("False");
if (d->ui.checkFrenet->isChecked())
frenet = QString::fromLatin1("True");
else
frenet = QString::fromLatin1("False");
QTextStream str(&list);
int count = d->ui.selector->selectedTreeWidget()->topLevelItemCount();
if (count < 1) {
QMessageBox::critical(this, tr("Too few elements"), tr("At least one edge or wire is required."));
return false;
}
for (int i=0; i<count; i++) {
QTreeWidgetItem* child = d->ui.selector->selectedTreeWidget()->topLevelItem(i);
QString name = child->data(0, Qt::UserRole).toString();
if (name == QLatin1String(spineObject.c_str())) {
QMessageBox::critical(this, tr("Wrong selection"), tr("'%1' cannot be used as profile and path.")
.arg(QString::fromUtf8(spineLabel.c_str())));
return false;
}
str << "App.getDocument('" << d->document.c_str() << "')." << name << ", ";
}
try {
Gui::WaitCursor wc;
QString cmd;
cmd = QString::fromLatin1(
"App.getDocument('%5').addObject('Part::Sweep','Sweep')\n"
"App.getDocument('%5').ActiveObject.Sections=[%1]\n"
"App.getDocument('%5').ActiveObject.Spine=%2\n"
"App.getDocument('%5').ActiveObject.Solid=%3\n"
"App.getDocument('%5').ActiveObject.Frenet=%4\n"
)
.arg(list)
.arg(QLatin1String(selection.c_str()))
.arg(solid)
.arg(frenet)
.arg(QString::fromLatin1(d->document.c_str()));
Gui::Document* doc = Gui::Application::Instance->getDocument(d->document.c_str());
if (!doc) throw Base::Exception("Document doesn't exist anymore");
doc->openCommand("Sweep");
Gui::Application::Instance->runPythonCode((const char*)cmd.toLatin1(), false, false);
doc->getDocument()->recompute();
App::DocumentObject* obj = doc->getDocument()->getActiveObject();
if (obj && !obj->isValid()) {
std::string msg = obj->getStatusString();
doc->abortCommand();
throw Base::Exception(msg);
}
doc->commitCommand();
}
catch (const Base::Exception& e) {
QMessageBox::warning(this, tr("Input error"), QString::fromLatin1(e.what()));
return false;
}
return true;
}
const std::list<gp_Trsf> LinearPattern::getTransformations(const std::vector<App::DocumentObject*>)
{
std::string stdDirection = StdDirection.getValue();
float distance = Length.getValue();
if (distance < Precision::Confusion())
throw Base::Exception("Pattern length too small");
int occurrences = Occurrences.getValue();
if (occurrences < 2)
throw Base::Exception("At least two occurrences required");
bool reversed = Reversed.getValue();
gp_Dir dir;
double offset = distance / (occurrences - 1);
if (!stdDirection.empty()) {
// Note: The placement code commented out below had the defect of working always on the
// absolute X,Y,Z direction, not on the relative coordinate system of the Body feature.
// It requires positionBySupport() to be called in Transformed::Execute() AFTER
// the call to getTransformations()
// New code thanks to logari81
if (stdDirection == "X") {
//dir = Base::Axis(Base::Vector3d(0,0,0), Base::Vector3d(1,0,0));
dir = gp_Dir(1,0,0);
} else if (stdDirection == "Y") {
//dir = Base::Axis(Base::Vector3d(0,0,0), Base::Vector3d(0,1,0));
dir = gp_Dir(0,1,0);
} else if(stdDirection == "Z") {
//dir = Base::Axis(Base::Vector3d(0,0,0), Base::Vector3d(0,0,1));
dir = gp_Dir(0,0,1);
} else {
throw Base::Exception("Invalid direction (must be X, Y or Z)");
}
} else {
App::DocumentObject* refObject = Direction.getValue();
if (refObject == NULL)
throw Base::Exception("No direction specified");
if (!refObject->getTypeId().isDerivedFrom(Part::Feature::getClassTypeId()))
throw Base::Exception("Direction reference must be edge or face of a feature");
std::vector<std::string> subStrings = Direction.getSubValues();
if (subStrings.empty() || subStrings[0].empty())
throw Base::Exception("No direction reference specified");
Part::Feature* refFeature = static_cast<Part::Feature*>(refObject);
Part::TopoShape refShape = refFeature->Shape.getShape();
TopoDS_Shape ref = refShape.getSubShape(subStrings[0].c_str());
if (ref.ShapeType() == TopAbs_FACE) {
TopoDS_Face refFace = TopoDS::Face(ref);
if (refFace.IsNull())
throw Base::Exception("Failed to extract direction plane");
BRepAdaptor_Surface adapt(refFace);
if (adapt.GetType() != GeomAbs_Plane)
throw Base::Exception("Direction face must be planar");
dir = adapt.Plane().Axis().Direction();
//gp_Dir d = adapt.Plane().Axis().Direction();
//dir = Base::Axis(Base::Vector3d(0,0,0), Base::Vector3d(d.X(), d.Y(), d.Z()));
} else if (ref.ShapeType() == TopAbs_EDGE) {
TopoDS_Edge refEdge = TopoDS::Edge(ref);
if (refEdge.IsNull())
throw Base::Exception("Failed to extract direction edge");
BRepAdaptor_Curve adapt(refEdge);
if (adapt.GetType() != GeomAbs_Line)
throw Base::Exception("Direction edge must be a straight line");
//gp_Dir d = adapt.Line().Direction();
//dir = Base::Axis(Base::Vector3d(0,0,0), Base::Vector3d(d.X(), d.Y(), d.Z()));
dir = adapt.Line().Direction();
} else {
throw Base::Exception("Direction reference must be edge or face");
}
TopLoc_Location invObjLoc = this->getLocation().Inverted();
dir.Transform(invObjLoc.Transformation());
}
// get the support placement
// TODO: Check for NULL pointer
/*Part::Feature* supportFeature = static_cast<Part::Feature*>(originals.front());
if (supportFeature == NULL)
throw Base::Exception("Cannot work on invalid support shape");
Base::Placement supportPlacement = supportFeature->Placement.getValue();
dir *= supportPlacement;
gp_Vec direction(dir.getDirection().x, dir.getDirection().y, dir.getDirection().z);*/
gp_Vec direction(dir.X(), dir.Y(), dir.Z());
if (reversed)
direction.Reverse();
// Note: The original feature is NOT included in the list of transformations! Therefore
// we start with occurrence number 1, not number 0
std::list<gp_Trsf> transformations;
gp_Trsf trans;
transformations.push_back(trans); // identity transformation
for (int i = 1; i < occurrences; i++) {
trans.SetTranslation(direction * i * offset);
transformations.push_back(trans);
}
return transformations;
}
App::DocumentObjectExecReturn *Draft::execute(void)
{
// Get parameters
// Base shape
Part::TopoShape TopShape;
try {
TopShape = getBaseShape();
} catch (Base::Exception& e) {
return new App::DocumentObjectExecReturn(e.what());
}
// Faces where draft should be applied
// Note: Cannot be const reference currently because of BRepOffsetAPI_DraftAngle::Remove() bug, see below
std::vector<std::string> SubVals = Base.getSubValuesStartsWith("Face");
if (SubVals.size() == 0)
return new App::DocumentObjectExecReturn("No faces specified");
// Draft angle
double angle = Angle.getValue() / 180.0 * M_PI;
// Pull direction
gp_Dir pullDirection;
App::DocumentObject* refDirection = PullDirection.getValue();
if (refDirection != NULL) {
if (refDirection->getTypeId().isDerivedFrom(PartDesign::Line::getClassTypeId())) {
PartDesign::Line* line = static_cast<PartDesign::Line*>(refDirection);
Base::Vector3d d = line->getDirection();
pullDirection = gp_Dir(d.x, d.y, d.z);
} else if (refDirection->getTypeId().isDerivedFrom(Part::Feature::getClassTypeId())) {
std::vector<std::string> subStrings = PullDirection.getSubValues();
if (subStrings.empty() || subStrings[0].empty())
throw Base::Exception("No pull direction reference specified");
Part::Feature* refFeature = static_cast<Part::Feature*>(refDirection);
Part::TopoShape refShape = refFeature->Shape.getShape();
TopoDS_Shape ref = refShape.getSubShape(subStrings[0].c_str());
if (ref.ShapeType() == TopAbs_EDGE) {
TopoDS_Edge refEdge = TopoDS::Edge(ref);
if (refEdge.IsNull())
throw Base::Exception("Failed to extract pull direction reference edge");
BRepAdaptor_Curve adapt(refEdge);
if (adapt.GetType() != GeomAbs_Line)
throw Base::Exception("Pull direction reference edge must be linear");
pullDirection = adapt.Line().Direction();
} else {
throw Base::Exception("Pull direction reference must be an edge or a datum line");
}
} else {
throw Base::Exception("Pull direction reference must be an edge of a feature or a datum line");
}
TopLoc_Location invObjLoc = this->getLocation().Inverted();
pullDirection.Transform(invObjLoc.Transformation());
}
// Neutral plane
gp_Pln neutralPlane;
App::DocumentObject* refPlane = NeutralPlane.getValue();
if (refPlane == NULL) {
// Try to guess a neutral plane from the first selected face
// Get edges of first selected face
TopoDS_Shape face = TopShape.getSubShape(SubVals[0].c_str());
TopTools_IndexedMapOfShape mapOfEdges;
TopExp::MapShapes(face, TopAbs_EDGE, mapOfEdges);
bool found = false;
for (int i = 1; i <= mapOfEdges.Extent(); i++) {
// Note: What happens if mapOfEdges(i) is the degenerated edge of a cone?
// But in that case the draft is not possible anyway!
BRepAdaptor_Curve c(TopoDS::Edge(mapOfEdges(i)));
gp_Pnt p1 = c.Value(c.FirstParameter());
gp_Pnt p2 = c.Value(c.LastParameter());
if (c.IsClosed()) {
// Edge is a circle or a circular arc (other types are not allowed for drafting)
neutralPlane = gp_Pln(p1, c.Circle().Axis().Direction());
found = true;
break;
} else {
// Edge is linear
// Find midpoint of edge and create auxiliary plane through midpoint normal to edge
gp_Pnt pm = c.Value((c.FirstParameter() + c.LastParameter()) / 2.0);
Handle(Geom_Plane) aux = new Geom_Plane(pm, gp_Dir(p2.X() - p1.X(), p2.Y() - p1.Y(), p2.Z() - p1.Z()));
// Intersect plane with face. Is there no easier way?
BRepAdaptor_Surface adapt(TopoDS::Face(face), Standard_False);
Handle(Geom_Surface) sf = adapt.Surface().Surface();
GeomAPI_IntSS intersector(aux, sf, Precision::Confusion());
if (!intersector.IsDone())
continue;
Handle(Geom_Curve) icurve = intersector.Line(1);
if (!icurve->IsKind(STANDARD_TYPE(Geom_Line)))
continue;
// TODO: How to extract the line from icurve without creating an edge first?
TopoDS_Edge edge = BRepBuilderAPI_MakeEdge(icurve);
BRepAdaptor_Curve c(edge);
neutralPlane = gp_Pln(pm, c.Line().Direction());
found = true;
break;
}
}
if (!found)
throw Base::Exception("No neutral plane specified and none can be guessed");
} else {
if (refPlane->getTypeId().isDerivedFrom(PartDesign::Plane::getClassTypeId())) {
PartDesign::Plane* plane = static_cast<PartDesign::Plane*>(refPlane);
Base::Vector3d b = plane->getBasePoint();
Base::Vector3d n = plane->getNormal();
neutralPlane = gp_Pln(gp_Pnt(b.x, b.y, b.z), gp_Dir(n.x, n.y, n.z));
} else if (refPlane->getTypeId().isDerivedFrom(App::Plane::getClassTypeId())) {
neutralPlane = Feature::makePlnFromPlane(refPlane);
} else if (refPlane->getTypeId().isDerivedFrom(Part::Feature::getClassTypeId())) {
std::vector<std::string> subStrings = NeutralPlane.getSubValues();
if (subStrings.empty() || subStrings[0].empty())
throw Base::Exception("No neutral plane reference specified");
Part::Feature* refFeature = static_cast<Part::Feature*>(refPlane);
Part::TopoShape refShape = refFeature->Shape.getShape();
TopoDS_Shape ref = refShape.getSubShape(subStrings[0].c_str());
if (ref.ShapeType() == TopAbs_FACE) {
TopoDS_Face refFace = TopoDS::Face(ref);
if (refFace.IsNull())
throw Base::Exception("Failed to extract neutral plane reference face");
BRepAdaptor_Surface adapt(refFace);
if (adapt.GetType() != GeomAbs_Plane)
throw Base::Exception("Neutral plane reference face must be planar");
neutralPlane = adapt.Plane();
} else if (ref.ShapeType() == TopAbs_EDGE) {
if (refDirection != NULL) {
// Create neutral plane through edge normal to pull direction
TopoDS_Edge refEdge = TopoDS::Edge(ref);
if (refEdge.IsNull())
throw Base::Exception("Failed to extract neutral plane reference edge");
BRepAdaptor_Curve c(refEdge);
if (c.GetType() != GeomAbs_Line)
throw Base::Exception("Neutral plane reference edge must be linear");
double a = c.Line().Angle(gp_Lin(c.Value(c.FirstParameter()), pullDirection));
if (std::fabs(a - M_PI_2) > Precision::Confusion())
throw Base::Exception("Neutral plane reference edge must be normal to pull direction");
neutralPlane = gp_Pln(c.Value(c.FirstParameter()), pullDirection);
} else {
throw Base::Exception("Neutral plane reference can only be an edge if pull direction is defined");
}
} else {
throw Base::Exception("Neutral plane reference must be a face");
}
} else {
throw Base::Exception("Neutral plane reference must be face of a feature or a datum plane");
}
TopLoc_Location invObjLoc = this->getLocation().Inverted();
neutralPlane.Transform(invObjLoc.Transformation());
}
if (refDirection == NULL) {
// Choose pull direction normal to neutral plane
pullDirection = neutralPlane.Axis().Direction();
}
// Reversed pull direction
bool reversed = Reversed.getValue();
if (reversed)
angle *= -1.0;
this->positionByBaseFeature();
// create an untransformed copy of the base shape
Part::TopoShape baseShape(TopShape);
baseShape.setTransform(Base::Matrix4D());
try {
BRepOffsetAPI_DraftAngle mkDraft;
// Note:
// LocOpe_SplitDrafts can split a face with a wire and apply draft to both parts
// Not clear though whether the face must have free boundaries
// LocOpe_DPrism can create a stand-alone draft prism. The sketch can only have a single
// wire, though.
// BRepFeat_MakeDPrism requires a support for the operation but will probably support multiple
// wires in the sketch
bool success;
do {
success = true;
mkDraft.Init(baseShape.getShape());
for (std::vector<std::string>::iterator it=SubVals.begin(); it != SubVals.end(); ++it) {
TopoDS_Face face = TopoDS::Face(baseShape.getSubShape(it->c_str()));
// TODO: What is the flag for?
mkDraft.Add(face, pullDirection, angle, neutralPlane);
if (!mkDraft.AddDone()) {
// Note: the function ProblematicShape returns the face on which the error occurred
// Note: mkDraft.Remove() stumbles on a bug in Draft_Modification::Remove() and is
// therefore unusable. See http://forum.freecadweb.org/viewtopic.php?f=10&t=3209&start=10#p25341
// The only solution is to discard mkDraft and start over without the current face
// mkDraft.Remove(face);
Base::Console().Error("Adding face failed on %s. Omitted\n", it->c_str());
success = false;
SubVals.erase(it);
break;
}
}
}
while (!success);
mkDraft.Build();
if (!mkDraft.IsDone())
return new App::DocumentObjectExecReturn("Failed to create draft");
TopoDS_Shape shape = mkDraft.Shape();
if (shape.IsNull())
return new App::DocumentObjectExecReturn("Resulting shape is null");
this->Shape.setValue(getSolid(shape));
return App::DocumentObject::StdReturn;
}
catch (Standard_Failure) {
Handle(Standard_Failure) e = Standard_Failure::Caught();
return new App::DocumentObjectExecReturn(e->GetMessageString());
}
}
PyObject* Application::sExport(PyObject * /*self*/, PyObject *args,PyObject * /*kwd*/)
{
PyObject* object;
char* Name;
if (!PyArg_ParseTuple(args, "Oet",&object,"utf-8",&Name))
return NULL;
std::string Utf8Name = std::string(Name);
PyMem_Free(Name);
PY_TRY {
App::Document* doc = 0;
Py::Sequence list(object);
for (Py::Sequence::iterator it = list.begin(); it != list.end(); ++it) {
PyObject* item = (*it).ptr();
if (PyObject_TypeCheck(item, &(App::DocumentObjectPy::Type))) {
App::DocumentObject* obj = static_cast<App::DocumentObjectPy*>(item)->getDocumentObjectPtr();
doc = obj->getDocument();
break;
}
}
QString fileName = QString::fromUtf8(Utf8Name.c_str());
QFileInfo fi;
fi.setFile(fileName);
QString ext = fi.suffix().toLower();
if (ext == QLatin1String("iv") || ext == QLatin1String("wrl") ||
ext == QLatin1String("vrml") || ext == QLatin1String("wrz")) {
// build up the graph
SoSeparator* sep = new SoSeparator();
sep->ref();
for (Py::Sequence::iterator it = list.begin(); it != list.end(); ++it) {
PyObject* item = (*it).ptr();
if (PyObject_TypeCheck(item, &(App::DocumentObjectPy::Type))) {
App::DocumentObject* obj = static_cast<App::DocumentObjectPy*>(item)->getDocumentObjectPtr();
Gui::ViewProvider* vp = Gui::Application::Instance->getViewProvider(obj);
if (vp) {
sep->addChild(vp->getRoot());
}
}
}
SoGetPrimitiveCountAction action;
action.setCanApproximate(true);
action.apply(sep);
bool binary = false;
if (action.getTriangleCount() > 100000 ||
action.getPointCount() > 30000 ||
action.getLineCount() > 10000)
binary = true;
SoFCDB::writeToFile(sep, Utf8Name.c_str(), binary);
sep->unref();
}
else if (ext == QLatin1String("pdf")) {
// get the view that belongs to the found document
Gui::Document* gui_doc = Application::Instance->getDocument(doc);
if (gui_doc) {
Gui::MDIView* view = gui_doc->getActiveView();
if (view) {
View3DInventor* view3d = qobject_cast<View3DInventor*>(view);
if (view3d)
view3d->viewAll();
QPrinter printer(QPrinter::ScreenResolution);
printer.setOutputFormat(QPrinter::PdfFormat);
printer.setOutputFileName(fileName);
view->print(&printer);
}
}
}
else {
Base::Console().Error("File type '%s' not supported\n", ext.toLatin1().constData());
}
} PY_CATCH;
Py_Return;
}
void DlgExtrusion::apply()
{
if (ui->treeWidget->selectedItems().isEmpty()) {
QMessageBox::critical(this, windowTitle(),
tr("Select a shape for extrusion, first."));
return;
}
Gui::WaitCursor wc;
App::Document* activeDoc = App::GetApplication().getDocument(this->document.c_str());
if (!activeDoc) {
QMessageBox::critical(this, windowTitle(),
tr("The document '%1' doesn't exist.").arg(QString::fromUtf8(this->label.c_str())));
return;
}
activeDoc->openTransaction("Extrude");
Base::Reference<ParameterGrp> hGrp = App::GetApplication().GetUserParameter()
.GetGroup("BaseApp")->GetGroup("Preferences")->GetGroup("Mod/Part");
bool addBaseName = hGrp->GetBool("AddBaseObjectName", false);
QString shape, type, name, label;
QList<QTreeWidgetItem *> items = ui->treeWidget->selectedItems();
for (QList<QTreeWidgetItem *>::iterator it = items.begin(); it != items.end(); ++it) {
shape = (*it)->data(0, Qt::UserRole).toString();
type = QString::fromLatin1("Part::Extrusion");
if (addBaseName) {
QString baseName = QString::fromLatin1("Extrude_%1").arg(shape);
label = QString::fromLatin1("%1_Extrude").arg((*it)->text(0));
name = QString::fromLatin1(activeDoc->getUniqueObjectName((const char*)baseName.toLatin1()).c_str());
}
else {
name = QString::fromLatin1(activeDoc->getUniqueObjectName("Extrude").c_str());
label = name;
}
double len = ui->dirLen->value();
double dirX = ui->dirX->value();
double dirY = ui->dirY->value();
double dirZ = ui->dirZ->value();
double angle = ui->taperAngle->value().getValue();
bool makeSolid = ui->makeSolid->isChecked();
// inspect geometry
App::DocumentObject* obj = activeDoc->getObject((const char*)shape.toLatin1());
if (!obj || !obj->isDerivedFrom(Part::Feature::getClassTypeId())) continue;
Part::Feature* fea = static_cast<Part::Feature*>(obj);
const TopoDS_Shape& data = fea->Shape.getValue();
if (data.IsNull()) continue;
// check for planes
if (ui->checkNormal->isChecked() && data.ShapeType() == TopAbs_FACE) {
BRepAdaptor_Surface adapt(TopoDS::Face(data));
if (adapt.GetType() == GeomAbs_Plane) {
double u = 0.5*(adapt.FirstUParameter() + adapt.LastUParameter());
double v = 0.5*(adapt.FirstVParameter() + adapt.LastVParameter());
BRepLProp_SLProps prop(adapt,u,v,1,Precision::Confusion());
if (prop.IsNormalDefined()) {
gp_Pnt pnt; gp_Vec vec;
// handles the orientation state of the shape
BRepGProp_Face(TopoDS::Face(data)).Normal(u,v,pnt,vec);
dirX = vec.X();
dirY = vec.Y();
dirZ = vec.Z();
}
}
}
QString code = QString::fromLatin1(
"FreeCAD.getDocument(\"%1\").addObject(\"%2\",\"%3\")\n"
"FreeCAD.getDocument(\"%1\").%3.Base = FreeCAD.getDocument(\"%1\").%4\n"
"FreeCAD.getDocument(\"%1\").%3.Dir = (%5,%6,%7)\n"
"FreeCAD.getDocument(\"%1\").%3.Solid = (%8)\n"
"FreeCAD.getDocument(\"%1\").%3.TaperAngle = (%9)\n"
"FreeCADGui.getDocument(\"%1\").%4.Visibility = False\n"
"FreeCAD.getDocument(\"%1\").%3.Label = '%10'\n")
.arg(QString::fromLatin1(this->document.c_str()))
.arg(type).arg(name).arg(shape)
.arg(dirX*len)
.arg(dirY*len)
.arg(dirZ*len)
.arg(makeSolid ? QLatin1String("True") : QLatin1String("False"))
.arg(angle)
.arg(label);
Gui::Application::Instance->runPythonCode((const char*)code.toLatin1());
QByteArray to = name.toLatin1();
QByteArray from = shape.toLatin1();
Gui::Command::copyVisual(to, "ShapeColor", from);
Gui::Command::copyVisual(to, "LineColor", from);
Gui::Command::copyVisual(to, "PointColor", from);
}
activeDoc->commitTransaction();
try {
ui->statusLabel->clear();
activeDoc->recompute();
ui->statusLabel->setText(QString::fromLatin1
("<span style=\" color:#55aa00;\">%1</span>").arg(tr("Succeeded")));
}
catch (const std::exception& e) {
ui->statusLabel->setText(QString::fromLatin1
("<span style=\" color:#ff0000;\">%1</span>").arg(tr("Failed")));
Base::Console().Error("%s\n", e.what());
}
catch (const Base::Exception& e) {
ui->statusLabel->setText(QString::fromLatin1
("<span style=\" color:#ff0000;\">%1</span>").arg(tr("Failed")));
Base::Console().Error("%s\n", e.what());
}
catch (...) {
ui->statusLabel->setText(QString::fromLatin1
("<span style=\" color:#ff0000;\">%1</span>").arg(tr("Failed")));
Base::Console().Error("General error in extrusion\n");
}
}
App::DocumentObject* TaskFeaturePick::makeCopy(App::DocumentObject* obj, std::string sub, bool independent) {
App::DocumentObject* copy = nullptr;
// Check for null to avoid segfault
if (!obj)
return copy;
if( independent &&
(obj->isDerivedFrom(Sketcher::SketchObject::getClassTypeId()) ||
obj->isDerivedFrom(PartDesign::FeaturePrimitive::getClassTypeId()))) {
//we do know that the created instance is a document object, as obj is one. But we do not know which
//exact type
auto name = std::string("Copy") + std::string(obj->getNameInDocument());
copy = App::GetApplication().getActiveDocument()->addObject(obj->getTypeId().getName(), name.c_str());
//copy over all properties
std::vector<App::Property*> props;
std::vector<App::Property*> cprops;
obj->getPropertyList(props);
copy->getPropertyList(cprops);
auto it = cprops.begin();
for( App::Property* prop : props ) {
//independent copies don't have links and are not attached
if(independent && (
prop->getTypeId().isDerivedFrom(App::PropertyLink::getClassTypeId()) ||
prop->getTypeId().isDerivedFrom(App::PropertyLinkList::getClassTypeId()) ||
prop->getTypeId().isDerivedFrom(App::PropertyLinkSub::getClassTypeId()) ||
prop->getTypeId().isDerivedFrom(App::PropertyLinkSubList::getClassTypeId())||
( prop->getGroup() && strcmp(prop->getGroup(),"Attachment")==0) )) {
++it;
continue;
}
App::Property* cprop = *it++;
if( strcmp(prop->getName(), "Label") == 0 ) {
static_cast<App::PropertyString*>(cprop)->setValue(name.c_str());
continue;
}
cprop->Paste(*prop);
//we are a independent copy, therefore no external geometry was copied. WE therefore can delete all
//constraints
if(obj->isDerivedFrom(Sketcher::SketchObject::getClassTypeId()))
static_cast<Sketcher::SketchObject*>(copy)->delConstraintsToExternal();
}
}
else {
std::string name;
if(!independent)
name = std::string("Reference");
else
name = std::string("Copy");
name += std::string(obj->getNameInDocument());
std::string entity;
if(!sub.empty())
entity = sub;
Part::PropertyPartShape* shapeProp = nullptr;
// TODO Replace it with commands (2015-09-11, Fat-Zer)
if(obj->isDerivedFrom(Part::Datum::getClassTypeId())) {
copy = App::GetApplication().getActiveDocument()->addObject(
obj->getClassTypeId().getName(), name.c_str() );
//we need to reference the individual datums and make again datums. This is important as
//datum adjust their size dependent on the part size, hence simply copying the shape is
//not enough
long int mode = mmDeactivated;
Part::Datum *datumCopy = static_cast<Part::Datum*>(copy);
if(obj->getTypeId() == PartDesign::Point::getClassTypeId()) {
mode = mm0Vertex;
}
else if(obj->getTypeId() == PartDesign::Line::getClassTypeId()) {
mode = mm1TwoPoints;
}
else if(obj->getTypeId() == PartDesign::Plane::getClassTypeId()) {
mode = mmFlatFace;
}
else
return copy;
// TODO Recheck this. This looks strange in case of independent copy (2015-10-31, Fat-Zer)
if(!independent) {
datumCopy->Support.setValue(obj, entity.c_str());
datumCopy->MapMode.setValue(mode);
}
else if(!entity.empty()) {
datumCopy->Shape.setValue(static_cast<Part::Datum*>(obj)->Shape.getShape().getSubShape(entity.c_str()));
} else {
datumCopy->Shape.setValue(static_cast<Part::Datum*>(obj)->Shape.getValue());
}
}
else if(obj->getTypeId() == PartDesign::ShapeBinder::getClassTypeId() ||
obj->isDerivedFrom(Part::Feature::getClassTypeId())) {
copy = App::GetApplication().getActiveDocument()->addObject("PartDesign::ShapeBinder", name.c_str());
if(!independent)
static_cast<PartDesign::ShapeBinder*>(copy)->Support.setValue(obj, entity.c_str());
else
shapeProp = &static_cast<PartDesign::ShapeBinder*>(copy)->Shape;
}
if(independent && shapeProp) {
if(entity.empty())
shapeProp->setValue(static_cast<Part::Feature*>(obj)->Shape.getValue());
else
shapeProp->setValue(static_cast<Part::Feature*>(obj)->Shape.getShape().getSubShape(entity.c_str()));
}
}
return copy;
}
App::DocumentObjectExecReturn *FeatureViewSpreadsheet::execute(void)
{
// quick tests
App::DocumentObject* link = Source.getValue();
std::string scellstart = CellStart.getValue();
std::string scellend = CellEnd.getValue();
if (!link)
return new App::DocumentObjectExecReturn("No spreadsheet linked");
if (!link->getTypeId().isDerivedFrom(Spreadsheet::Sheet::getClassTypeId()))
return new App::DocumentObjectExecReturn("The linked object is not a spreadsheet");
if ( (scellstart.empty()) || (scellend.empty()) )
return new App::DocumentObjectExecReturn("Empty cell value");
// build a list of available colums: A, B, C, ... AA, AB, ... ZY, ZZ.
std::string alphabet = "ABCDEFGHIJKLMNOPQRSTUVWXYZ";
std::vector<std::string> availcolumns;
for (int i=0; i<26; ++i) {
std::stringstream s;
s << alphabet[i];
availcolumns.push_back(s.str());
}
for (int i=0; i<26; ++i) {
for (int j=0; i<26; ++i) {
std::stringstream s;
s << alphabet[i] << alphabet[j];
availcolumns.push_back(s.str());
}
}
// build rows range and columns range
std::vector<std::string> columns;
std::vector<int> rows;
try {
for (unsigned int i=0; i<scellstart.length(); ++i) {
if (isdigit(scellstart[i])) {
columns.push_back(scellstart.substr(0,i));
rows.push_back(std::atoi(scellstart.substr(i,scellstart.length()-1).c_str()));
}
}
for (unsigned int i=0; i<scellend.length(); ++i) {
if (isdigit(scellend[i])) {
std::string startcol = columns.back();
std::string endcol = scellend.substr(0,i);
bool valid = false;
for (std::vector<std::string>::const_iterator j = availcolumns.begin(); j != availcolumns.end(); ++j) {
if ( (*j) == startcol) {
if ( (*j) != endcol) {
valid = true;
}
} else {
if (valid) {
if ( (*j) == endcol) {
columns.push_back((*j));
valid = false;
} else {
columns.push_back((*j));
}
}
}
}
int endrow = std::atoi(scellend.substr(i,scellend.length()-1).c_str());
for (int j=rows.back()+1; j<=endrow; ++j) {
rows.push_back(j);
}
}
}
} catch (std::exception) {
return new App::DocumentObjectExecReturn("Invalid cell range");
}
// create the containing group
std::string ViewName = Label.getValue();
std::stringstream result,hr,hg,hb;
const App::Color& c = Color.getValue();
hr << hex << setfill('0') << setw(2) << (int)(255.0*c.r);
hg << hex << setfill('0') << setw(2) << (int)(255.0*c.g);
hb << hex << setfill('0') << setw(2) << (int)(255.0*c.b);
result << "<g id=\"" << ViewName << "\" transform=\"translate(" << X.getValue() << "," << Y.getValue() << ")"
<< " rotate(" << Rotation.getValue() << ")"
<< " scale(" << Scale.getValue() << ")\">" << endl;
// fill the cells
float rowoffset = 0.0;
float coloffset = 0.0;
float cellheight = 100;
float cellwidth = 100;
std::string celltext;
Spreadsheet::Sheet* sheet = static_cast<Spreadsheet::Sheet*>(link);
std::vector<std::string> skiplist;
for (std::vector<std::string>::const_iterator col = columns.begin(); col != columns.end(); ++col) {
// create a group for each column
result << " <g id=\"" << ViewName << "_col" << (*col) << "\">" << endl;
for (std::vector<int>::const_iterator row = rows.begin(); row != rows.end(); ++row) {
// get cell size
std::stringstream srow;
srow << (*row);
App::CellAddress address((*col) + srow.str());
cellwidth = sheet->getColumnWidth(address.col());
cellheight = sheet->getRowHeight(address.row());
celltext = "";
// get the text
App::Property* prop = sheet->getPropertyByName(address.toString().c_str());
std::stringstream field;
if (prop != 0) {
if (prop->isDerivedFrom((App::PropertyQuantity::getClassTypeId())))
field << static_cast<App::PropertyQuantity*>(prop)->getValue();
else if (prop->isDerivedFrom((App::PropertyFloat::getClassTypeId())))
field << static_cast<App::PropertyFloat*>(prop)->getValue();
else if (prop->isDerivedFrom((App::PropertyString::getClassTypeId())))
field << static_cast<App::PropertyString*>(prop)->getValue();
else
assert(0);
celltext = field.str();
}
// get colors, style, alignment and span
int alignment;
std::string bcolor = "none";
std::string fcolor = "#" + hr.str() + hg.str() + hb.str();
std::string textstyle = "";
Spreadsheet::Cell* cell = sheet->getCell(address);
if (cell) {
App::Color f,b;
std::set<std::string> st;
int colspan, rowspan;
if (cell->getBackground(b)) {
std::stringstream br,bg,bb;
br << hex << setfill('0') << setw(2) << (int)(255.0*b.r);
bg << hex << setfill('0') << setw(2) << (int)(255.0*b.g);
bb << hex << setfill('0') << setw(2) << (int)(255.0*b.b);
bcolor = "#" + br.str() + bg.str() + bb.str();
}
if (cell->getForeground(f)) {
std::stringstream fr,fg,fb;
fr << hex << setfill('0') << setw(2) << (int)(255.0*f.r);
fg << hex << setfill('0') << setw(2) << (int)(255.0*f.g);
fb << hex << setfill('0') << setw(2) << (int)(255.0*f.b);
fcolor = "#" + fr.str() + fg.str() + fb.str();
}
if (cell->getStyle(st)) {
for (std::set<std::string>::const_iterator i = st.begin(); i != st.end(); ++i) {
if ((*i) == "bold")
textstyle = textstyle + "font-weight: bold; ";
else if ((*i) == "italic")
textstyle = textstyle + "font-style: italic; ";
else if ((*i) == "underline")
textstyle = textstyle + "text-decoration: underline; ";
}
}
if (cell->getSpans(rowspan,colspan)) {
for (int i=0; i<colspan; ++i) {
for (int j=0; j<rowspan; ++j) {
App::CellAddress nextcell(address.row()+j,address.col()+i);
if (i > 0)
cellwidth = cellwidth + sheet->getColumnWidth(nextcell.col());
if (j > 0)
cellheight = cellheight + sheet->getRowHeight(nextcell.row());
if ( (i > 0) || (j > 0) )
skiplist.push_back(nextcell.toString());
}
}
}
cell->getAlignment(alignment);
}
// skip cell if found in skiplist
if (std::find(skiplist.begin(), skiplist.end(), address.toString()) == skiplist.end()) {
result << " <rect x=\"" << coloffset << "\" y=\"" << rowoffset << "\" width=\"" << cellwidth
<< "\" height=\"" << cellheight << "\" style=\"fill:" << bcolor << ";stroke-width:"
<< LineWidth.getValue()/Scale.getValue() << ";stroke:#" << hr.str() << hg.str() << hb.str() << ";\" />" << endl;
if (alignment & Spreadsheet::Cell::ALIGNMENT_LEFT)
result << " <text style=\"" << textstyle << "\" x=\"" << coloffset + FontSize.getValue()/2 << "\" y=\"" << rowoffset + 0.75 * cellheight << "\" font-family=\"" ;
if (alignment & Spreadsheet::Cell::ALIGNMENT_HCENTER)
result << " <text text-anchor=\"middle\" style=\"" << textstyle << "\" x=\"" << coloffset + cellwidth/2 << "\" y=\"" << rowoffset + 0.75 * cellheight << "\" font-family=\"" ;
if (alignment & Spreadsheet::Cell::ALIGNMENT_RIGHT)
result << " <text text-anchor=\"end\" style=\"" << textstyle << "\" x=\"" << coloffset + (cellwidth - FontSize.getValue()/2) << "\" y=\"" << rowoffset + 0.75 * cellheight << "\" font-family=\"" ;
result << Font.getValue() << "\"" << " font-size=\"" << FontSize.getValue() << "\""
<< " fill=\"" << fcolor << "\">" << celltext << "</text>" << endl;
}
rowoffset = rowoffset + cellheight;
}
result << " </g>" << endl;
rowoffset = 0.0;
coloffset = coloffset + cellwidth;
}
// close the containing group
result << "</g>" << endl;
// Apply the resulting fragment
ViewResult.setValue(result.str().c_str());
return App::DocumentObject::StdReturn;
}
void SelectionSingleton::slotDeletedObject(const App::DocumentObject& Obj)
{
// remove also from the selection, if selected
Selection().rmvSelection( Obj.getDocument()->getName(), Obj.getNameInDocument() );
}
App::DocumentObjectExecReturn *DrawViewDetail::execute(void)
{
if (!keepUpdated()) {
return App::DocumentObject::StdReturn;
}
App::DocumentObject* baseObj = BaseView.getValue();
if (!baseObj) {
Base::Console().Log("INFO - DVD::execute - No BaseView - creation?\n");
return DrawView::execute();
}
DrawViewPart* dvp = nullptr;
if (!baseObj->getTypeId().isDerivedFrom(TechDraw::DrawViewPart::getClassTypeId())) {
return new App::DocumentObjectExecReturn("BaseView object is not a DrawViewPart object");
} else {
dvp = static_cast<DrawViewPart*>(baseObj);
}
TopoDS_Shape shape = dvp->getSourceShapeFused();
if (shape.IsNull()) {
return new App::DocumentObjectExecReturn("DVD - Linked shape object is invalid");
}
Base::Vector3d anchor = AnchorPoint.getValue(); //this is a 2D point (in unrotated coords)
Base::Vector3d dirDetail = dvp->Direction.getValue();
double shapeRotate = dvp->Rotation.getValue(); //degrees CW?
if (dvp->isDerivedFrom(TechDraw::DrawProjGroupItem::getClassTypeId())) {
DrawProjGroupItem* dpgi= static_cast<TechDraw::DrawProjGroupItem*>(dvp);
shapeRotate += dpgi->getRotateAngle() * 180.0/M_PI; // to degrees from radians
}
double radius = getFudgeRadius();
double scale = getScale();
BRepBuilderAPI_Copy BuilderCopy(shape);
TopoDS_Shape myShape = BuilderCopy.Shape();
//rotate the copied shape to match orientation of BaseView and center it on origin
gp_Pnt gpCenter = TechDrawGeometry::findCentroid(myShape, //centre of unrotated shape
dirDetail);
Base::Vector3d shapeCenter = Base::Vector3d(gpCenter.X(),gpCenter.Y(),gpCenter.Z());
gp_Ax2 viewAxis = getViewAxis(shapeCenter, dirDetail, false);
myShape = TechDrawGeometry::rotateShape(myShape, //rotate to match Base shape
viewAxis,
-shapeRotate);
myShape = TechDrawGeometry::moveShape(myShape, //centre on origin
-shapeCenter);
// shapeCenter = Base::Vector3d(0.0,0.0,0.0);
gpCenter = TechDrawGeometry::findCentroid(myShape,
dirDetail);
shapeCenter = Base::Vector3d(gpCenter.X(),gpCenter.Y(),gpCenter.Z());
Bnd_Box bbxSource;
bbxSource.SetGap(0.0);
BRepBndLib::Add(myShape, bbxSource);
double diag = sqrt(bbxSource.SquareExtent());
Base::Vector3d extentFar,extentNear;
extentFar = shapeCenter + dirDetail * diag;
extentNear = shapeCenter + dirDetail * diag * -1.0;
anchor = Base::Vector3d(anchor.x,anchor.y, 0.0);
viewAxis = getViewAxis(shapeCenter, dirDetail, false); //change view axis to (0,0,0)
Base::Vector3d offsetCenter3D = DrawUtil::toR3(viewAxis, anchor); //displacement in R3
Base::Vector3d stdZ(0.0,0.0,1.0);
if (DrawUtil::checkParallel(dirDetail,stdZ)) {
extentNear = extentNear + offsetCenter3D;
} else {
extentNear = extentNear - offsetCenter3D;
}
gp_Dir cylDir(dirDetail.x,dirDetail.y,dirDetail.z);
gp_Pnt cylPoint(extentNear.x,extentNear.y,extentNear.z);
gp_Ax2 cylAxis(cylPoint,cylDir);
BRepPrimAPI_MakeCylinder mkCyl(cylAxis, radius, (extentFar-extentNear).Length());
TopoDS_Shell sh = mkCyl.Cylinder().Shell();
BRepBuilderAPI_MakeSolid mkSol(sh);
TopoDS_Solid tool = mkSol.Solid();
BRepAlgoAPI_Common mkCommon(myShape,tool);
if (!mkCommon.IsDone()) {
Base::Console().Log("DVD::execute - mkCommon not done\n");
return new App::DocumentObjectExecReturn("DVD::execute - mkCommon not done");
}
if (mkCommon.Shape().IsNull()) {
Base::Console().Log("DVD::execute - mkCommon.Shape is Null\n");
return new App::DocumentObjectExecReturn("DVD::execute - mkCommon.Shape is Null");
}
//Did we get a solid?
TopExp_Explorer xp;
xp.Init(mkCommon.Shape(),TopAbs_SOLID);
if (!(xp.More() == Standard_True)) {
Base::Console().Message("DVD::execute - mkCommon.Shape is not a solid!\n");
}
TopoDS_Shape detail = mkCommon.Shape();
Bnd_Box testBox;
testBox.SetGap(0.0);
BRepBndLib::Add(detail, testBox);
if (testBox.IsVoid()) {
Base::Console().Message("DrawViewDetail - detail area contains no geometry\n");
return new App::DocumentObjectExecReturn("DVDetail - detail area contains no geometry");
}
//for debugging show compound instead of common
// BRep_Builder builder;
// TopoDS_Compound Comp;
// builder.MakeCompound(Comp);
// builder.Add(Comp, tool);
// builder.Add(Comp, myShape);
gp_Pnt inputCenter;
try {
inputCenter = TechDrawGeometry::findCentroid(tool,
Direction.getValue());
TopoDS_Shape mirroredShape = TechDrawGeometry::mirrorShape(detail,
inputCenter,
scale);
viewAxis = getViewAxis(Base::Vector3d(inputCenter.X(),inputCenter.Y(),inputCenter.Z()),Direction.getValue());
if (!DrawUtil::fpCompare(Rotation.getValue(),0.0)) {
mirroredShape = TechDrawGeometry::rotateShape(mirroredShape,
viewAxis,
Rotation.getValue()); //degrees cw?
}
geometryObject = buildGeometryObject(mirroredShape,viewAxis);
geometryObject->pruneVertexGeom(Base::Vector3d(0.0,0.0,0.0),Radius.getValue() * scale); //remove vertices beyond clipradius
#if MOD_TECHDRAW_HANDLE_FACES
if (handleFaces()) {
try {
extractFaces();
}
catch (Standard_Failure& e4) {
Base::Console().Log("LOG - DVD::execute - extractFaces failed for %s - %s **\n",getNameInDocument(),e4.GetMessageString());
return new App::DocumentObjectExecReturn(e4.GetMessageString());
}
}
#endif //#if MOD_TECHDRAW_HANDLE_FACES
}
catch (Standard_Failure& e1) {
Base::Console().Log("LOG - DVD::execute - base shape failed for %s - %s **\n",getNameInDocument(),e1.GetMessageString());
return new App::DocumentObjectExecReturn(e1.GetMessageString());
}
requestPaint();
dvp->requestPaint();
return App::DocumentObject::StdReturn;
}
void ProfileBased::getAxis(const App::DocumentObject *pcReferenceAxis, const std::vector<std::string> &subReferenceAxis,
Base::Vector3d& base, Base::Vector3d& dir)
{
dir = Base::Vector3d(0,0,0); // If unchanged signals that no valid axis was found
if (pcReferenceAxis == NULL)
return;
App::DocumentObject* profile = Profile.getValue();
gp_Pln sketchplane;
if (profile->getTypeId().isDerivedFrom(Part::Part2DObject::getClassTypeId())) {
Part::Part2DObject* sketch = getVerifiedSketch();
Base::Placement SketchPlm = sketch->Placement.getValue();
Base::Vector3d SketchVector = Base::Vector3d(0, 0, 1);
Base::Rotation SketchOrientation = SketchPlm.getRotation();
SketchOrientation.multVec(SketchVector, SketchVector);
Base::Vector3d SketchPos = SketchPlm.getPosition();
sketchplane = gp_Pln(gp_Pnt(SketchPos.x, SketchPos.y, SketchPos.z), gp_Dir(SketchVector.x, SketchVector.y, SketchVector.z));
if (pcReferenceAxis == profile) {
bool hasValidAxis = false;
Base::Axis axis;
if (subReferenceAxis[0] == "V_Axis") {
hasValidAxis = true;
axis = sketch->getAxis(Part::Part2DObject::V_Axis);
}
else if (subReferenceAxis[0] == "H_Axis") {
hasValidAxis = true;
axis = sketch->getAxis(Part::Part2DObject::H_Axis);
}
else if (subReferenceAxis[0].size() > 4 && subReferenceAxis[0].substr(0, 4) == "Axis") {
int AxId = std::atoi(subReferenceAxis[0].substr(4, 4000).c_str());
if (AxId >= 0 && AxId < sketch->getAxisCount()) {
hasValidAxis = true;
axis = sketch->getAxis(AxId);
}
}
if (hasValidAxis) {
axis *= SketchPlm;
base = axis.getBase();
dir = axis.getDirection();
return;
} //else - an edge of the sketch was selected as an axis
}
}
else if (profile->getTypeId().isDerivedFrom(Part::Feature::getClassTypeId())) {
Base::Placement SketchPlm = getVerifiedObject()->Placement.getValue();
Base::Vector3d SketchVector = getProfileNormal();
Base::Vector3d SketchPos = SketchPlm.getPosition();
sketchplane = gp_Pln(gp_Pnt(SketchPos.x, SketchPos.y, SketchPos.z), gp_Dir(SketchVector.x, SketchVector.y, SketchVector.z));
}
// get reference axis
if (pcReferenceAxis->getTypeId().isDerivedFrom(PartDesign::Line::getClassTypeId())) {
const PartDesign::Line* line = static_cast<const PartDesign::Line*>(pcReferenceAxis);
base = line->getBasePoint();
dir = line->getDirection();
// Check that axis is perpendicular with sketch plane!
if (sketchplane.Axis().Direction().IsParallel(gp_Dir(dir.x, dir.y, dir.z), Precision::Angular()))
throw Base::ValueError("Rotation axis must not be perpendicular with the sketch plane");
return;
}
if (pcReferenceAxis->getTypeId().isDerivedFrom(App::Line::getClassTypeId())) {
const App::Line* line = static_cast<const App::Line*>(pcReferenceAxis);
base = Base::Vector3d(0,0,0);
line->Placement.getValue().multVec(Base::Vector3d (1,0,0), dir);
// Check that axis is perpendicular with sketch plane!
if (sketchplane.Axis().Direction().IsParallel(gp_Dir(dir.x, dir.y, dir.z), Precision::Angular()))
throw Base::ValueError("Rotation axis must not be perpendicular with the sketch plane");
return;
}
if (pcReferenceAxis->getTypeId().isDerivedFrom(Part::Feature::getClassTypeId())) {
if (subReferenceAxis.empty())
throw Base::ValueError("No rotation axis reference specified");
const Part::Feature* refFeature = static_cast<const Part::Feature*>(pcReferenceAxis);
Part::TopoShape refShape = refFeature->Shape.getShape();
TopoDS_Shape ref = refShape.getSubShape(subReferenceAxis[0].c_str());
if (ref.ShapeType() == TopAbs_EDGE) {
TopoDS_Edge refEdge = TopoDS::Edge(ref);
if (refEdge.IsNull())
throw Base::ValueError("Failed to extract rotation edge");
BRepAdaptor_Curve adapt(refEdge);
if (adapt.GetType() != GeomAbs_Line)
throw Base::TypeError("Rotation edge must be a straight line");
gp_Pnt b = adapt.Line().Location();
base = Base::Vector3d(b.X(), b.Y(), b.Z());
gp_Dir d = adapt.Line().Direction();
dir = Base::Vector3d(d.X(), d.Y(), d.Z());
// Check that axis is co-planar with sketch plane!
// Check that axis is perpendicular with sketch plane!
if (sketchplane.Axis().Direction().IsParallel(d, Precision::Angular()))
throw Base::ValueError("Rotation axis must not be perpendicular with the sketch plane");
return;
} else {
throw Base::TypeError("Rotation reference must be an edge");
}
}
throw Base::TypeError("Rotation axis reference is invalid");
}
PyObject* Application::sExport(PyObject * /*self*/, PyObject *args,PyObject * /*kwd*/)
{
PyObject* object;
const char* filename;
if (!PyArg_ParseTuple(args, "Os",&object,&filename))
return NULL;
PY_TRY {
App::Document* doc = 0;
Py::List list(object);
for (Py::List::iterator it = list.begin(); it != list.end(); ++it) {
PyObject* item = (*it).ptr();
if (PyObject_TypeCheck(item, &(App::DocumentObjectPy::Type))) {
App::DocumentObject* obj = static_cast<App::DocumentObjectPy*>(item)->getDocumentObjectPtr();
doc = obj->getDocument();
break;
}
}
// get the view that belongs to the found document
if (doc) {
QString fileName = QString::fromUtf8(filename);
QFileInfo fi;
fi.setFile(fileName);
QString ext = fi.completeSuffix().toLower();
if (ext == QLatin1String("iv") || ext == QLatin1String("wrl") ||
ext == QLatin1String("vrml") || ext == QLatin1String("wrz") ||
ext == QLatin1String("svg") || ext == QLatin1String("idtf")) {
Gui::Document* gui_doc = Application::Instance->getDocument(doc);
std::list<MDIView*> view3d = gui_doc->getMDIViewsOfType(View3DInventor::getClassTypeId());
if (view3d.empty()) {
PyErr_SetString(PyExc_Exception, "Cannot export to SVG because document doesn't have a 3d view");
return 0;
}
else {
QString cmd = QString::fromLatin1(
"Gui.getDocument(\"%1\").mdiViewsOfType('Gui::View3DInventor')[0].dump(\"%2\")"
).arg(QLatin1String(doc->getName())).arg(fi.absoluteFilePath());
Base::Interpreter().runString(cmd.toUtf8());
}
}
else if (ext == QLatin1String("pdf")) {
Gui::Document* gui_doc = Application::Instance->getDocument(doc);
if (gui_doc) {
Gui::MDIView* view = gui_doc->getActiveView();
if (view) {
View3DInventor* view3d = qobject_cast<View3DInventor*>(view);
if (view3d)
view3d->viewAll();
QPrinter printer(QPrinter::ScreenResolution);
printer.setOutputFormat(QPrinter::PdfFormat);
printer.setOutputFileName(fileName);
view->print(&printer);
}
}
}
}
} PY_CATCH;
Py_Return;
}
App::DocumentObjectExecReturn *DrawViewSection::execute(void)
{
App::DocumentObject* link = Source.getValue();
App::DocumentObject* base = BaseView.getValue();
if (!link || !base) {
Base::Console().Log("INFO - DVS::execute - No Source or Link - creation?\n");
return DrawView::execute();
}
if (!link->getTypeId().isDerivedFrom(Part::Feature::getClassTypeId()))
return new App::DocumentObjectExecReturn("Source object is not a Part object");
if (!base->getTypeId().isDerivedFrom(TechDraw::DrawViewPart::getClassTypeId()))
return new App::DocumentObjectExecReturn("BaseView object is not a DrawViewPart object");
//Base::Console().Message("TRACE - DVS::execute() - %s/%s\n",getNameInDocument(),Label.getValue());
const Part::TopoShape &partTopo = static_cast<Part::Feature*>(link)->Shape.getShape();
if (partTopo.getShape().IsNull())
return new App::DocumentObjectExecReturn("Linked shape object is empty");
(void) DrawView::execute(); //make sure Scale is up to date
gp_Pln pln = getSectionPlane();
gp_Dir gpNormal = pln.Axis().Direction();
Base::Vector3d orgPnt = SectionOrigin.getValue();
Base::BoundBox3d bb = partTopo.getBoundBox();
if(!isReallyInBox(orgPnt, bb)) {
Base::Console().Warning("DVS: Section Plane doesn't intersect part in %s\n",getNameInDocument());
Base::Console().Warning("DVS: Using center of bounding box.\n");
orgPnt = bb.GetCenter();
SectionOrigin.setValue(orgPnt);
}
// Make the extrusion face
double dMax = bb.CalcDiagonalLength();
BRepBuilderAPI_MakeFace mkFace(pln, -dMax,dMax,-dMax,dMax);
TopoDS_Face aProjFace = mkFace.Face();
if(aProjFace.IsNull())
return new App::DocumentObjectExecReturn("DrawViewSection - Projected face is NULL");
gp_Vec extrudeDir = dMax * gp_Vec(gpNormal);
TopoDS_Shape prism = BRepPrimAPI_MakePrism(aProjFace, extrudeDir, false, true).Shape();
// We need to copy the shape to not modify the BRepstructure
BRepBuilderAPI_Copy BuilderCopy(partTopo.getShape());
TopoDS_Shape myShape = BuilderCopy.Shape();
BRepAlgoAPI_Cut mkCut(myShape, prism);
if (!mkCut.IsDone())
return new App::DocumentObjectExecReturn("Section cut has failed");
TopoDS_Shape rawShape = mkCut.Shape();
Bnd_Box testBox;
BRepBndLib::Add(rawShape, testBox);
testBox.SetGap(0.0);
if (testBox.IsVoid()) { //prism & input don't intersect. rawShape is garbage, don't bother.
Base::Console().Log("INFO - DVS::execute - prism & input don't intersect\n");
return DrawView::execute();
}
gp_Pnt inputCenter;
try {
inputCenter = TechDrawGeometry::findCentroid(rawShape,
Direction.getValue());
TopoDS_Shape mirroredShape = TechDrawGeometry::mirrorShape(rawShape,
inputCenter,
Scale.getValue());
geometryObject = buildGeometryObject(mirroredShape,inputCenter); //this is original shape after cut by section prism
#if MOD_TECHDRAW_HANDLE_FACES
extractFaces();
#endif //#if MOD_TECHDRAW_HANDLE_FACES
}
catch (Standard_Failure) {
Handle_Standard_Failure e1 = Standard_Failure::Caught();
Base::Console().Log("LOG - DVS::execute - base shape failed for %s - %s **\n",getNameInDocument(),e1->GetMessageString());
return new App::DocumentObjectExecReturn(e1->GetMessageString());
}
try {
TopoDS_Compound sectionCompound = findSectionPlaneIntersections(rawShape);
TopoDS_Shape mirroredSection = TechDrawGeometry::mirrorShape(sectionCompound,
inputCenter,
Scale.getValue());
TopoDS_Compound newFaces;
BRep_Builder builder;
builder.MakeCompound(newFaces);
TopExp_Explorer expl(mirroredSection, TopAbs_FACE);
for (; expl.More(); expl.Next()) {
const TopoDS_Face& face = TopoDS::Face(expl.Current());
TopoDS_Face pFace = projectFace(face,
inputCenter,
Direction.getValue());
if (!pFace.IsNull()) {
builder.Add(newFaces,pFace);
}
}
sectionFaces = newFaces;
}
catch (Standard_Failure) {
Handle_Standard_Failure e2 = Standard_Failure::Caught();
Base::Console().Log("LOG - DVS::execute - failed building section faces for %s - %s **\n",getNameInDocument(),e2->GetMessageString());
return new App::DocumentObjectExecReturn(e2->GetMessageString());
}
return App::DocumentObject::StdReturn;
}
App::DocumentObjectExecReturn *Sweep::execute(void)
{
if (Sections.getSize() == 0)
return new App::DocumentObjectExecReturn("No sections linked.");
App::DocumentObject* spine = Spine.getValue();
if (!(spine && spine->getTypeId().isDerivedFrom(Part::Feature::getClassTypeId())))
return new App::DocumentObjectExecReturn("No spine linked.");
const std::vector<std::string>& subedge = Spine.getSubValues();
TopoDS_Shape path;
const Part::TopoShape& shape = static_cast<Part::Feature*>(spine)->Shape.getValue();
if (!shape._Shape.IsNull()) {
try {
if (!subedge.empty()) {
BRepBuilderAPI_MakeWire mkWire;
for (std::vector<std::string>::const_iterator it = subedge.begin(); it != subedge.end(); ++it) {
TopoDS_Shape subshape = shape.getSubShape(it->c_str());
mkWire.Add(TopoDS::Edge(subshape));
}
path = mkWire.Wire();
}
else if (shape._Shape.ShapeType() == TopAbs_EDGE) {
path = shape._Shape;
}
else if (shape._Shape.ShapeType() == TopAbs_WIRE) {
BRepBuilderAPI_MakeWire mkWire(TopoDS::Wire(shape._Shape));
path = mkWire.Wire();
}
else if (shape._Shape.ShapeType() == TopAbs_COMPOUND) {
TopoDS_Iterator it(shape._Shape);
for (; it.More(); it.Next()) {
if (it.Value().IsNull())
return new App::DocumentObjectExecReturn("In valid element in spine.");
if ((it.Value().ShapeType() != TopAbs_EDGE) &&
(it.Value().ShapeType() != TopAbs_WIRE)) {
return new App::DocumentObjectExecReturn("Element in spine is neither an edge nor a wire.");
}
}
Handle(TopTools_HSequenceOfShape) hEdges = new TopTools_HSequenceOfShape();
Handle(TopTools_HSequenceOfShape) hWires = new TopTools_HSequenceOfShape();
for (TopExp_Explorer xp(shape._Shape, TopAbs_EDGE); xp.More(); xp.Next())
hEdges->Append(xp.Current());
ShapeAnalysis_FreeBounds::ConnectEdgesToWires(hEdges, Precision::Confusion(), Standard_True, hWires);
int len = hWires->Length();
if (len != 1)
return new App::DocumentObjectExecReturn("Spine is not connected.");
path = hWires->Value(1);
}
else {
return new App::DocumentObjectExecReturn("Spine is neither an edge nor a wire.");
}
}
catch (Standard_Failure) {
return new App::DocumentObjectExecReturn("Invalid spine.");
}
}
try {
TopTools_ListOfShape profiles;
const std::vector<App::DocumentObject*>& shapes = Sections.getValues();
std::vector<App::DocumentObject*>::const_iterator it;
for (it = shapes.begin(); it != shapes.end(); ++it) {
if (!(*it)->isDerivedFrom(Part::Feature::getClassTypeId()))
return new App::DocumentObjectExecReturn("Linked object is not a shape.");
TopoDS_Shape shape = static_cast<Part::Feature*>(*it)->Shape.getValue();
if (shape.IsNull())
return new App::DocumentObjectExecReturn("Linked shape is invalid.");
// Extract first element of a compound
if (shape.ShapeType() == TopAbs_COMPOUND) {
TopoDS_Iterator it(shape);
for (; it.More(); it.Next()) {
if (!it.Value().IsNull()) {
shape = it.Value();
break;
}
}
}
// There is a weird behaviour of BRepOffsetAPI_MakePipeShell when trying to add the wire as is.
// If we re-create the wire then everything works fine.
// http://forum.freecadweb.org/viewtopic.php?f=10&t=2673&sid=fbcd2ff4589f0b2f79ed899b0b990648#p20268
if (shape.ShapeType() == TopAbs_FACE) {
TopoDS_Wire faceouterWire = ShapeAnalysis::OuterWire(TopoDS::Face(shape));
profiles.Append(faceouterWire);
}
else if (shape.ShapeType() == TopAbs_WIRE) {
BRepBuilderAPI_MakeWire mkWire(TopoDS::Wire(shape));
profiles.Append(mkWire.Wire());
}
else if (shape.ShapeType() == TopAbs_EDGE) {
BRepBuilderAPI_MakeWire mkWire(TopoDS::Edge(shape));
profiles.Append(mkWire.Wire());
}
else if (shape.ShapeType() == TopAbs_VERTEX) {
profiles.Append(shape);
}
else {
return new App::DocumentObjectExecReturn("Linked shape is not a vertex, edge, wire nor face.");
}
}
Standard_Boolean isSolid = Solid.getValue() ? Standard_True : Standard_False;
Standard_Boolean isFrenet = Frenet.getValue() ? Standard_True : Standard_False;
BRepBuilderAPI_TransitionMode transMode;
switch (Transition.getValue()) {
case 1: transMode = BRepBuilderAPI_RightCorner;
break;
case 2: transMode = BRepBuilderAPI_RoundCorner;
break;
default: transMode = BRepBuilderAPI_Transformed;
break;
}
if (path.ShapeType() == TopAbs_EDGE) {
BRepBuilderAPI_MakeWire mkWire(TopoDS::Edge(path));
path = mkWire.Wire();
}
BRepOffsetAPI_MakePipeShell mkPipeShell(TopoDS::Wire(path));
mkPipeShell.SetMode(isFrenet);
mkPipeShell.SetTransitionMode(transMode);
TopTools_ListIteratorOfListOfShape iter;
for (iter.Initialize(profiles); iter.More(); iter.Next()) {
mkPipeShell.Add(TopoDS_Shape(iter.Value()));
}
if (!mkPipeShell.IsReady())
Standard_Failure::Raise("shape is not ready to build");
mkPipeShell.Build();
if (isSolid)
mkPipeShell.MakeSolid();
this->Shape.setValue(mkPipeShell.Shape());
return App::DocumentObject::StdReturn;
}
catch (Standard_Failure) {
Handle_Standard_Failure e = Standard_Failure::Caught();
return new App::DocumentObjectExecReturn(e->GetMessageString());
}
catch (...) {
return new App::DocumentObjectExecReturn("A fatal error occurred when making the sweep");
}
}
void CmdPartDesignBody::activated(int iMsg)
{
Q_UNUSED(iMsg);
if ( !PartDesignGui::assureModernWorkflow( getDocument() ) )
return;
App::Part *actPart = PartDesignGui::getActivePart ();
App::Part* partOfBaseFeature = nullptr;
std::vector<App::DocumentObject*> features =
getSelection().getObjectsOfType(Part::Feature::getClassTypeId());
App::DocumentObject* baseFeature = nullptr;
bool viewAll = features.empty();
if (!features.empty()) {
if (features.size() == 1) {
baseFeature = features[0];
if ( baseFeature->isDerivedFrom ( PartDesign::Feature::getClassTypeId() ) &&
PartDesign::Body::findBodyOf ( baseFeature ) ) {
// Prevent creating bodies based on features already belonging to other bodies
QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Bad base feature"),
QObject::tr("Body can't be based on a PartDesign feature."));
baseFeature = nullptr;
}
else if (PartDesign::Body::findBodyOf ( baseFeature )){
QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Bad base feature"),
QObject::tr("%1 already belongs to a body, can't use it as base feature for another body.")
.arg(QString::fromUtf8(baseFeature->Label.getValue())));
baseFeature = nullptr;
}
else if ( baseFeature->isDerivedFrom ( Part::BodyBase::getClassTypeId() ) ) {
// Prevent creating bodies based on bodies
QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Bad base feature"),
QObject::tr("Body can't be based on another body."));
baseFeature = nullptr;
}
else {
partOfBaseFeature = App::Part::getPartOfObject(baseFeature);
if (partOfBaseFeature != 0 && partOfBaseFeature != actPart){
//prevent cross-part mess
QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Bad base feature"),
QObject::tr("Base feature (%1) belongs to other part.")
.arg(QString::fromUtf8(baseFeature->Label.getValue())));
baseFeature = nullptr;
};
}
} else {
QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Bad base feature"),
QObject::tr("Body may be based no more than on one feature."));
return;
}
}
openCommand("Add a Body");
std::string bodyName = getUniqueObjectName("Body");
// add the Body feature itself, and make it active
doCommand(Doc,"App.activeDocument().addObject('PartDesign::Body','%s')", bodyName.c_str());
if (baseFeature) {
if (partOfBaseFeature){
//withdraw base feature from Part, otherwise visibility mandess results
doCommand(Doc,"App.activeDocument().%s.removeObject(App.activeDocument().%s)",
partOfBaseFeature->getNameInDocument(), baseFeature->getNameInDocument());
}
doCommand(Doc,"App.activeDocument().%s.BaseFeature = App.activeDocument().%s",
bodyName.c_str(), baseFeature->getNameInDocument());
}
addModule(Gui,"PartDesignGui"); // import the Gui module only once a session
doCommand(Gui::Command::Gui, "Gui.activeView().setActiveObject('%s', App.activeDocument().%s)",
PDBODYKEY, bodyName.c_str());
// Make the "Create sketch" prompt appear in the task panel
doCommand(Gui,"Gui.Selection.clearSelection()");
doCommand(Gui,"Gui.Selection.addSelection(App.ActiveDocument.%s)", bodyName.c_str());
if (actPart) {
doCommand(Doc,"App.activeDocument().%s.addObject(App.ActiveDocument.%s)",
actPart->getNameInDocument(), bodyName.c_str());
}
// The method 'SoCamera::viewBoundingBox' is still declared as protected in Coin3d versions
// older than 4.0.
#if COIN_MAJOR_VERSION >= 4
// if no part feature was there then auto-adjust the camera
if (viewAll) {
Gui::Document* doc = Gui::Application::Instance->getDocument(getDocument());
Gui::View3DInventor* view = doc ? qobject_cast<Gui::View3DInventor*>(doc->getActiveView()) : nullptr;
if (view) {
SoCamera* camera = view->getViewer()->getCamera();
SbViewportRegion vpregion = view->getViewer()->getViewportRegion();
float aspectratio = vpregion.getViewportAspectRatio();
float size = Gui::ViewProviderOrigin::defaultSize();
SbBox3f bbox;
bbox.setBounds(-size,-size,-size,size,size,size);
camera->viewBoundingBox(bbox, aspectratio, 1.0f);
}
}
#endif
updateActive();
}
static PyObject * exporter(PyObject *self, PyObject *args)
{
PyObject* object;
char* Name;
if (!PyArg_ParseTuple(args, "Oet",&object,"utf-8",&Name))
return NULL;
std::string EncodedName = std::string(Name);
PyMem_Free(Name);
Gui::WaitCursor wc;
wc.restoreCursor();
PY_TRY {
Py::Sequence objlist(object);
if (objlist.size() == 0)
Py_Error(Base::BaseExceptionFreeCADError, "No object to export");
std::string path = App::GetApplication().getHomePath();
path += "Mod/Path/PathScripts/";
QDir dir1(QString::fromUtf8(path.c_str()), QString::fromAscii("*_post.py"));
std::string cMacroPath = App::GetApplication().GetParameterGroupByPath("User parameter:BaseApp/Preferences/Macro")
->GetASCII("MacroPath",App::Application::getUserAppDataDir().c_str());
QDir dir2(QString::fromUtf8(cMacroPath.c_str()), QString::fromAscii("*_post.py"));
QFileInfoList list = dir1.entryInfoList();
list << dir2.entryInfoList();
std::vector<std::string> scripts;
for (int i = 0; i < list.size(); ++i) {
QFileInfo fileInfo = list.at(i);
scripts.push_back(fileInfo.baseName().toStdString());
}
std::string selected;
PathGui::DlgProcessorChooser Dlg(scripts);
if (Dlg.exec() != QDialog::Accepted) {
Py_Return;
}
selected = Dlg.getSelected();
std::ostringstream pre;
std::ostringstream cmd;
if (selected.empty()) {
if (objlist.size() > 1) {
Py_Error(Base::BaseExceptionFreeCADError, "Cannot export more than one object without using a post script");
}
PyObject* item = objlist[0].ptr();
if (PyObject_TypeCheck(item, &(App::DocumentObjectPy::Type))) {
App::DocumentObject* obj = static_cast<App::DocumentObjectPy*>(item)->getDocumentObjectPtr();
App::Document* doc = obj->getDocument();
Gui::Command::runCommand(Gui::Command::Gui,"import Path");
cmd << "Path.write(FreeCAD.getDocument(\"" << doc->getName() << "\").getObject(\"" << obj->getNameInDocument() << "\"),\"" << EncodedName << "\")";
Gui::Command::runCommand(Gui::Command::Gui,cmd.str().c_str());
} else {
Py_Return;
}
} else {
for (int i = 0; i < list.size(); ++i) {
QFileInfo fileInfo = list.at(i);
if (fileInfo.baseName().toStdString() == selected) {
if (fileInfo.absoluteFilePath().contains(QString::fromAscii("PathScripts"))) {
pre << "from PathScripts import " << selected;
} else {
pre << "import " << selected;
}
Gui::Command::runCommand(Gui::Command::Gui,pre.str().c_str());
cmd << selected << ".export(__objs__,\"" << EncodedName << "\")";
Gui::Command::runCommand(Gui::Command::Gui,cmd.str().c_str());
}
}
}
} PY_CATCH;
Py_Return;
}
PyObject* Application::sInsert(PyObject * /*self*/, PyObject *args,PyObject * /*kwd*/)
{
char* Name;
char* DocName=0;
if (!PyArg_ParseTuple(args, "et|s","utf-8",&Name,&DocName))
return NULL;
std::string Utf8Name = std::string(Name);
PyMem_Free(Name);
PY_TRY {
QString fileName = QString::fromUtf8(Utf8Name.c_str());
QFileInfo fi;
fi.setFile(fileName);
QString ext = fi.suffix().toLower();
if (ext == QLatin1String("iv")) {
App::Document *doc = 0;
if (DocName)
doc = App::GetApplication().getDocument(DocName);
else
doc = App::GetApplication().getActiveDocument();
if (!doc)
doc = App::GetApplication().newDocument(DocName);
App::DocumentObject* obj = doc->addObject("App::InventorObject",
(const char*)fi.baseName().toUtf8());
obj->Label.setValue((const char*)fi.baseName().toUtf8());
static_cast<App::PropertyString*>(obj->getPropertyByName("FileName"))
->setValue((const char*)fi.absoluteFilePath().toUtf8());
doc->recompute();
}
else if (ext == QLatin1String("wrl") ||
ext == QLatin1String("vrml") ||
ext == QLatin1String("wrz")) {
App::Document *doc = 0;
if (DocName)
doc = App::GetApplication().getDocument(DocName);
else
doc = App::GetApplication().getActiveDocument();
if (!doc)
doc = App::GetApplication().newDocument(DocName);
App::DocumentObject* obj = doc->addObject("App::VRMLObject",
(const char*)fi.baseName().toUtf8());
obj->Label.setValue((const char*)fi.baseName().toUtf8());
static_cast<App::PropertyFileIncluded*>(obj->getPropertyByName("VrmlFile"))
->setValue((const char*)fi.absoluteFilePath().toUtf8());
doc->recompute();
}
else if (ext == QLatin1String("py") || ext == QLatin1String("fcmacro") ||
ext == QLatin1String("fcscript")) {
PythonEditor* editor = new PythonEditor();
editor->setWindowIcon(Gui::BitmapFactory().pixmap("applications-python"));
PythonEditorView* edit = new PythonEditorView(editor, getMainWindow());
edit->open(fileName);
edit->resize(400, 300);
getMainWindow()->addWindow( edit );
}
else {
Base::Console().Error("File type '%s' not supported\n", ext.toLatin1().constData());
}
} PY_CATCH;
Py_Return;
}
Py::Object exporter(const Py::Tuple& args)
{
PyObject *object;
char *Name;
if (!PyArg_ParseTuple(args.ptr(), "Oet", &object, "utf-8", &Name))
throw Py::Exception();
std::string encodedName = std::string(Name);
PyMem_Free(Name);
Base::FileInfo file(encodedName);
// extract ending
if (file.extension().empty())
throw Py::RuntimeError("No file extension");
Py::Sequence list(object);
Base::Type pointsId = Base::Type::fromName("Points::Feature");
for (Py::Sequence::iterator it = list.begin(); it != list.end(); ++it) {
PyObject* item = (*it).ptr();
if (PyObject_TypeCheck(item, &(App::DocumentObjectPy::Type))) {
App::DocumentObject* obj = static_cast<App::DocumentObjectPy*>(item)->getDocumentObjectPtr();
if (obj->getTypeId().isDerivedFrom(pointsId)) {
Points::Feature* fea = static_cast<Points::Feature*>(obj);
const PointKernel& kernel = fea->Points.getValue();
std::unique_ptr<Writer> writer;
if (file.hasExtension("asc")) {
writer.reset(new AscWriter(kernel));
}
#ifdef HAVE_PCL_IO
else if (file.hasExtension("ply")) {
writer.reset(new PlyWriter(kernel));
}
else if (file.hasExtension("pcd")) {
writer.reset(new PcdWriter(kernel));
}
#endif
else {
throw Py::RuntimeError("Unsupported file extension");
}
// get additional properties if there
App::PropertyInteger* width = dynamic_cast<App::PropertyInteger*>
(fea->getPropertyByName("Width"));
if (width) {
writer->setWidth(width->getValue());
}
App::PropertyInteger* height = dynamic_cast<App::PropertyInteger*>
(fea->getPropertyByName("Height"));
if (height) {
writer->setHeight(height->getValue());
}
// get gray values
Points::PropertyGreyValueList* grey = dynamic_cast<Points::PropertyGreyValueList*>
(fea->getPropertyByName("Intensity"));
if (grey) {
writer->setIntensities(grey->getValues());
}
// get colors
App::PropertyColorList* col = dynamic_cast<App::PropertyColorList*>
(fea->getPropertyByName("Color"));
if (col) {
writer->setColors(col->getValues());
}
// get normals
Points::PropertyNormalList* nor = dynamic_cast<Points::PropertyNormalList*>
(fea->getPropertyByName("Normal"));
if (nor) {
writer->setNormals(nor->getValues());
}
writer->write(encodedName);
break;
}
else {
Base::Console().Message("'%s' is not a point object, export will be ignored.\n", obj->Label.getValue());
}
}
}
return Py::None();
}
void DlgExtrusion::writeParametersToFeature(App::DocumentObject &feature, App::DocumentObject* base) const
{
Gui::Command::doCommand(Gui::Command::Doc,"f = App.getDocument('%s').getObject('%s')", feature.getDocument()->getName(), feature.getNameInDocument());
if (base)
Gui::Command::doCommand(Gui::Command::Doc,"f.Base = App.getDocument('%s').getObject('%s')", base->getDocument()->getName(), base->getNameInDocument());
Part::Extrusion::eDirMode dirMode = this->getDirMode();
const char* modestr = Part::Extrusion::eDirModeStrings[dirMode];
Gui::Command::doCommand(Gui::Command::Doc,"f.DirMode = \"%s\"", modestr);
if (dirMode == Part::Extrusion::dmCustom){
Base::Vector3d dir = this->getDir();
Gui::Command::doCommand(Gui::Command::Doc, "f.Dir = App.Vector(%.15f, %.15f, %.15f)", dir.x, dir.y, dir.z);
}
App::PropertyLinkSub lnk;
this->getAxisLink(lnk);
std::stringstream linkstr;
if(lnk.getValue() == nullptr){
linkstr << "None";
} else {
linkstr << "(App.getDocument(\"" << lnk.getValue()->getDocument()->getName() <<"\")." << lnk.getValue()->getNameInDocument();
linkstr << ", [";
for (const std::string &str: lnk.getSubValues()){
linkstr << "\"" << str << "\"";
}
linkstr << "])";
}
Gui::Command::doCommand(Gui::Command::Doc,"f.DirLink = %s", linkstr.str().c_str());
Gui::Command::doCommand(Gui::Command::Doc,"f.LengthFwd = %.15f", ui->spinLenFwd->value().getValue());
Gui::Command::doCommand(Gui::Command::Doc,"f.LengthRev = %.15f", ui->spinLenRev->value().getValue());
Gui::Command::doCommand(Gui::Command::Doc,"f.Solid = %s", ui->chkSolid->isChecked() ? "True" : "False");
Gui::Command::doCommand(Gui::Command::Doc,"f.Reversed = %s", ui->chkReversed->isChecked() ? "True" : "False");
Gui::Command::doCommand(Gui::Command::Doc,"f.Symmetric = %s", ui->chkSymmetric->isChecked() ? "True" : "False");
Gui::Command::doCommand(Gui::Command::Doc,"f.TaperAngle = %.15f", ui->spinTaperAngle->value().getValue());
Gui::Command::doCommand(Gui::Command::Doc,"f.TaperAngleRev = %.15f", ui->spinTaperAngleRev->value().getValue());
}
