コード例 #1
0
ファイル: tool_boolean.cpp プロジェクト: kshji/mapper
void BooleanTool::pathObjectToPolygons(
        const PathObject* object,
        ClipperLib::Paths& polygons,
        PolyMap& polymap)
{
	object->update();
	
	polygons.reserve(polygons.size() + object->parts().size());
	
	for (const auto& part : object->parts())
	{
		const PathCoordVector& path_coords = part.path_coords;
		auto path_coords_end = path_coords.size();
		if (part.isClosed())
			--path_coords_end;
		
		ClipperLib::Path polygon;
		for (auto i = 0u; i < path_coords_end; ++i)
		{
			auto point = MapCoord { path_coords[i].pos };
			polygon.push_back(ClipperLib::IntPoint(point.nativeX(), point.nativeY()));
			polymap.insertMulti(polygon.back(), std::make_pair(&part, &path_coords[i]));
		}
		
		bool orientation = Orientation(polygon);
		if ( (&part == &object->parts().front()) != orientation )
		{
			std::reverse(polygon.begin(), polygon.end());
		}
		
		// Push_back shall move the polygon.
		static_assert(std::is_nothrow_move_constructible<ClipperLib::Path>::value, "ClipperLib::Path must be nothrow move constructible");
		polygons.push_back(polygon);
	}
}
コード例 #2
0
ファイル: clipperhelpers.cpp プロジェクト: LibrePCB/LibrePCB
ClipperLib::Paths ClipperHelpers::convert(
    const QVector<Path>&  paths,
    const PositiveLength& maxArcTolerance) noexcept {
  ClipperLib::Paths p;
  p.reserve(paths.size());
  foreach (const Path& path, paths) {
    p.push_back(convert(path, maxArcTolerance));
  }
コード例 #3
0
ファイル: ClipperUtils.cpp プロジェクト: prusa3d/Slic3r
// This is a safe variant of the polygon offset, tailored for a single ExPolygon:
// a single polygon with multiple non-overlapping holes.
// Each contour and hole is offsetted separately, then the holes are subtracted from the outer contours.
ClipperLib::Paths _offset(const Slic3r::ExPolygon &expolygon, const float delta,
    ClipperLib::JoinType joinType, double miterLimit)
{
//    printf("new ExPolygon offset\n");
    // 1) Offset the outer contour.
    const float delta_scaled = delta * float(CLIPPER_OFFSET_SCALE);
    ClipperLib::Paths contours;
    {
        ClipperLib::Path input = Slic3rMultiPoint_to_ClipperPath(expolygon.contour);
        scaleClipperPolygon(input);
        ClipperLib::ClipperOffset co;
        if (joinType == jtRound)
            co.ArcTolerance = miterLimit * double(CLIPPER_OFFSET_SCALE);
        else
            co.MiterLimit = miterLimit;
        co.ShortestEdgeLength = double(std::abs(delta_scaled * CLIPPER_OFFSET_SHORTEST_EDGE_FACTOR));
        co.AddPath(input, joinType, ClipperLib::etClosedPolygon);
        co.Execute(contours, delta_scaled);
    }

    // 2) Offset the holes one by one, collect the results.
    ClipperLib::Paths holes;
    {
        holes.reserve(expolygon.holes.size());
        for (Polygons::const_iterator it_hole = expolygon.holes.begin(); it_hole != expolygon.holes.end(); ++ it_hole) {
            ClipperLib::Path input = Slic3rMultiPoint_to_ClipperPath_reversed(*it_hole);
            scaleClipperPolygon(input);
            ClipperLib::ClipperOffset co;
            if (joinType == jtRound)
                co.ArcTolerance = miterLimit * double(CLIPPER_OFFSET_SCALE);
            else
                co.MiterLimit = miterLimit;
            co.ShortestEdgeLength = double(std::abs(delta_scaled * CLIPPER_OFFSET_SHORTEST_EDGE_FACTOR));
            co.AddPath(input, joinType, ClipperLib::etClosedPolygon);
            ClipperLib::Paths out;
            co.Execute(out, - delta_scaled);
            holes.insert(holes.end(), out.begin(), out.end());
        }
    }

    // 3) Subtract holes from the contours.
    ClipperLib::Paths output;
    if (holes.empty()) {
        output = std::move(contours);
    } else {
        ClipperLib::Clipper clipper;
        clipper.Clear();
        clipper.AddPaths(contours, ClipperLib::ptSubject, true);
        clipper.AddPaths(holes, ClipperLib::ptClip, true);
        clipper.Execute(ClipperLib::ctDifference, output, ClipperLib::pftNonZero, ClipperLib::pftNonZero);
    }
    
    // 4) Unscale the output.
    unscaleClipperPolygons(output);
    return output;
}
コード例 #4
0
ファイル: ClipperUtils.cpp プロジェクト: jiripech/Slic3r
// This is a safe variant of the polygon offset, tailored for a single ExPolygon:
// a single polygon with multiple non-overlapping holes.
// Each contour and hole is offsetted separately, then the holes are subtracted from the outer contours.
void offset(const Slic3r::ExPolygons &expolygons, ClipperLib::Paths* retval, const float delta,
    ClipperLib::JoinType joinType, double miterLimit)
{
//    printf("new ExPolygon offset\n");
    const float delta_scaled = delta * float(CLIPPER_OFFSET_SCALE);
    ClipperLib::Paths contours;
    ClipperLib::Paths holes;
    contours.reserve(expolygons.size());
    {
        size_t n_holes = 0;
        for (size_t i = 0; i < expolygons.size(); ++ i)
            n_holes += expolygons[i].holes.size();
        holes.reserve(n_holes);
    }

    for (Slic3r::ExPolygons::const_iterator it_expoly = expolygons.begin(); it_expoly != expolygons.end(); ++ it_expoly) {
        // 1) Offset the outer contour.
        {
            ClipperLib::Path input;
            Slic3rMultiPoint_to_ClipperPath(it_expoly->contour, &input);
            scaleClipperPolygon(input);
            ClipperLib::ClipperOffset co;
            if (joinType == jtRound)
                co.ArcTolerance = miterLimit * double(CLIPPER_OFFSET_SCALE);
            else
                co.MiterLimit = miterLimit;
            co.AddPath(input, joinType, ClipperLib::etClosedPolygon);
            ClipperLib::Paths out;
            co.Execute(out, delta_scaled);
            contours.insert(contours.end(), out.begin(), out.end());
        }

        // 2) Offset the holes one by one, collect the results.
        {
            for (Polygons::const_iterator it_hole = it_expoly->holes.begin(); it_hole != it_expoly->holes.end(); ++ it_hole) {
                ClipperLib::Path input;
                Slic3rMultiPoint_to_ClipperPath_reversed(*it_hole, &input);
                scaleClipperPolygon(input);
                ClipperLib::ClipperOffset co;
                if (joinType == jtRound)
                    co.ArcTolerance = miterLimit * double(CLIPPER_OFFSET_SCALE);
                else
                    co.MiterLimit = miterLimit;
                co.AddPath(input, joinType, ClipperLib::etClosedPolygon);
                ClipperLib::Paths out;
                co.Execute(out, - delta_scaled);
                holes.insert(holes.end(), out.begin(), out.end());
            }
        }
    }

    // 3) Subtract holes from the contours.
    ClipperLib::Paths output;
    {
        ClipperLib::Clipper clipper;
        clipper.Clear();
        clipper.AddPaths(contours, ClipperLib::ptSubject, true);
        clipper.AddPaths(holes, ClipperLib::ptClip, true);
        clipper.Execute(ClipperLib::ctDifference, *retval, ClipperLib::pftNonZero, ClipperLib::pftNonZero);
    }
    
    // 4) Unscale the output.
    unscaleClipperPolygons(*retval);
}