/// DoPromotion - This method actually performs the promotion of the specified
/// arguments, and returns the new function. At this point, we know that it's
/// safe to do so.
CallGraphNode *ArgPromotion::DoPromotion(Function *F,
SmallPtrSet<Argument*, 8> &ArgsToPromote,
SmallPtrSet<Argument*, 8> &ByValArgsToTransform) {
// Start by computing a new prototype for the function, which is the same as
// the old function, but has modified arguments.
const FunctionType *FTy = F->getFunctionType();
std::vector<const Type*> Params;
typedef std::set<IndicesVector> ScalarizeTable;
// ScalarizedElements - If we are promoting a pointer that has elements
// accessed out of it, keep track of which elements are accessed so that we
// can add one argument for each.
//
// Arguments that are directly loaded will have a zero element value here, to
// handle cases where there are both a direct load and GEP accesses.
//
std::map<Argument*, ScalarizeTable> ScalarizedElements;
// OriginalLoads - Keep track of a representative load instruction from the
// original function so that we can tell the alias analysis implementation
// what the new GEP/Load instructions we are inserting look like.
std::map<IndicesVector, LoadInst*> OriginalLoads;
// Attributes - Keep track of the parameter attributes for the arguments
// that we are *not* promoting. For the ones that we do promote, the parameter
// attributes are lost
SmallVector<AttributeWithIndex, 8> AttributesVec;
const AttrListPtr &PAL = F->getAttributes();
// Add any return attributes.
if (Attributes attrs = PAL.getRetAttributes())
AttributesVec.push_back(AttributeWithIndex::get(0, attrs));
// First, determine the new argument list
unsigned ArgIndex = 1;
for (Function::arg_iterator I = F->arg_begin(), E = F->arg_end(); I != E;
++I, ++ArgIndex) {
if (ByValArgsToTransform.count(I)) {
// Simple byval argument? Just add all the struct element types.
const Type *AgTy = cast<PointerType>(I->getType())->getElementType();
const StructType *STy = cast<StructType>(AgTy);
for (unsigned i = 0, e = STy->getNumElements(); i != e; ++i)
Params.push_back(STy->getElementType(i));
++NumByValArgsPromoted;
} else if (!ArgsToPromote.count(I)) {
// Unchanged argument
Params.push_back(I->getType());
if (Attributes attrs = PAL.getParamAttributes(ArgIndex))
AttributesVec.push_back(AttributeWithIndex::get(Params.size(), attrs));
} else if (I->use_empty()) {
// Dead argument (which are always marked as promotable)
++NumArgumentsDead;
} else {
// Okay, this is being promoted. This means that the only uses are loads
// or GEPs which are only used by loads
// In this table, we will track which indices are loaded from the argument
// (where direct loads are tracked as no indices).
ScalarizeTable &ArgIndices = ScalarizedElements[I];
for (Value::use_iterator UI = I->use_begin(), E = I->use_end(); UI != E;
++UI) {
Instruction *User = cast<Instruction>(*UI);
assert(isa<LoadInst>(User) || isa<GetElementPtrInst>(User));
IndicesVector Indices;
Indices.reserve(User->getNumOperands() - 1);
// Since loads will only have a single operand, and GEPs only a single
// non-index operand, this will record direct loads without any indices,
// and gep+loads with the GEP indices.
for (User::op_iterator II = User->op_begin() + 1, IE = User->op_end();
II != IE; ++II)
Indices.push_back(cast<ConstantInt>(*II)->getSExtValue());
// GEPs with a single 0 index can be merged with direct loads
if (Indices.size() == 1 && Indices.front() == 0)
Indices.clear();
ArgIndices.insert(Indices);
LoadInst *OrigLoad;
if (LoadInst *L = dyn_cast<LoadInst>(User))
OrigLoad = L;
else
// Take any load, we will use it only to update Alias Analysis
OrigLoad = cast<LoadInst>(User->use_back());
OriginalLoads[Indices] = OrigLoad;
}
// Add a parameter to the function for each element passed in.
for (ScalarizeTable::iterator SI = ArgIndices.begin(),
E = ArgIndices.end(); SI != E; ++SI) {
// not allowed to dereference ->begin() if size() is 0
Params.push_back(GetElementPtrInst::getIndexedType(I->getType(),
SI->begin(),
SI->end()));
assert(Params.back());
}
if (ArgIndices.size() == 1 && ArgIndices.begin()->empty())
++NumArgumentsPromoted;
else
++NumAggregatesPromoted;
}
}
// Add any function attributes.
if (Attributes attrs = PAL.getFnAttributes())
AttributesVec.push_back(AttributeWithIndex::get(~0, attrs));
const Type *RetTy = FTy->getReturnType();
// Work around LLVM bug PR56: the CWriter cannot emit varargs functions which
// have zero fixed arguments.
bool ExtraArgHack = false;
if (Params.empty() && FTy->isVarArg()) {
ExtraArgHack = true;
Params.push_back(Type::getInt32Ty(F->getContext()));
}
// Construct the new function type using the new arguments.
FunctionType *NFTy = FunctionType::get(RetTy, Params, FTy->isVarArg());
// Create the new function body and insert it into the module.
Function *NF = Function::Create(NFTy, F->getLinkage(), F->getName());
NF->copyAttributesFrom(F);
DEBUG(dbgs() << "ARG PROMOTION: Promoting to:" << *NF << "\n"
<< "From: " << *F);
// Recompute the parameter attributes list based on the new arguments for
// the function.
NF->setAttributes(AttrListPtr::get(AttributesVec.begin(),
AttributesVec.end()));
AttributesVec.clear();
F->getParent()->getFunctionList().insert(F, NF);
NF->takeName(F);
// Get the alias analysis information that we need to update to reflect our
// changes.
AliasAnalysis &AA = getAnalysis<AliasAnalysis>();
// Get the callgraph information that we need to update to reflect our
// changes.
CallGraph &CG = getAnalysis<CallGraph>();
// Get a new callgraph node for NF.
CallGraphNode *NF_CGN = CG.getOrInsertFunction(NF);
// Loop over all of the callers of the function, transforming the call sites
// to pass in the loaded pointers.
//
SmallVector<Value*, 16> Args;
while (!F->use_empty()) {
CallSite CS = CallSite::get(F->use_back());
assert(CS.getCalledFunction() == F);
Instruction *Call = CS.getInstruction();
const AttrListPtr &CallPAL = CS.getAttributes();
// Add any return attributes.
if (Attributes attrs = CallPAL.getRetAttributes())
AttributesVec.push_back(AttributeWithIndex::get(0, attrs));
// Loop over the operands, inserting GEP and loads in the caller as
// appropriate.
CallSite::arg_iterator AI = CS.arg_begin();
ArgIndex = 1;
for (Function::arg_iterator I = F->arg_begin(), E = F->arg_end();
I != E; ++I, ++AI, ++ArgIndex)
if (!ArgsToPromote.count(I) && !ByValArgsToTransform.count(I)) {
Args.push_back(*AI); // Unmodified argument
if (Attributes Attrs = CallPAL.getParamAttributes(ArgIndex))
AttributesVec.push_back(AttributeWithIndex::get(Args.size(), Attrs));
} else if (ByValArgsToTransform.count(I)) {
// Emit a GEP and load for each element of the struct.
const Type *AgTy = cast<PointerType>(I->getType())->getElementType();
const StructType *STy = cast<StructType>(AgTy);
Value *Idxs[2] = {
ConstantInt::get(Type::getInt32Ty(F->getContext()), 0), 0 };
for (unsigned i = 0, e = STy->getNumElements(); i != e; ++i) {
Idxs[1] = ConstantInt::get(Type::getInt32Ty(F->getContext()), i);
Value *Idx = GetElementPtrInst::Create(*AI, Idxs, Idxs+2,
(*AI)->getName()+"."+utostr(i),
Call);
// TODO: Tell AA about the new values?
Args.push_back(new LoadInst(Idx, Idx->getName()+".val", Call));
}
} else if (!I->use_empty()) {
// Non-dead argument: insert GEPs and loads as appropriate.
ScalarizeTable &ArgIndices = ScalarizedElements[I];
// Store the Value* version of the indices in here, but declare it now
// for reuse.
std::vector<Value*> Ops;
for (ScalarizeTable::iterator SI = ArgIndices.begin(),
E = ArgIndices.end(); SI != E; ++SI) {
Value *V = *AI;
LoadInst *OrigLoad = OriginalLoads[*SI];
if (!SI->empty()) {
Ops.reserve(SI->size());
const Type *ElTy = V->getType();
for (IndicesVector::const_iterator II = SI->begin(),
IE = SI->end(); II != IE; ++II) {
// Use i32 to index structs, and i64 for others (pointers/arrays).
// This satisfies GEP constraints.
const Type *IdxTy = (ElTy->isStructTy() ?
Type::getInt32Ty(F->getContext()) :
Type::getInt64Ty(F->getContext()));
Ops.push_back(ConstantInt::get(IdxTy, *II));
// Keep track of the type we're currently indexing.
ElTy = cast<CompositeType>(ElTy)->getTypeAtIndex(*II);
}
// And create a GEP to extract those indices.
V = GetElementPtrInst::Create(V, Ops.begin(), Ops.end(),
V->getName()+".idx", Call);
Ops.clear();
AA.copyValue(OrigLoad->getOperand(0), V);
}
// Since we're replacing a load make sure we take the alignment
// of the previous load.
LoadInst *newLoad = new LoadInst(V, V->getName()+".val", Call);
newLoad->setAlignment(OrigLoad->getAlignment());
Args.push_back(newLoad);
AA.copyValue(OrigLoad, Args.back());
}
}
if (ExtraArgHack)
Args.push_back(Constant::getNullValue(Type::getInt32Ty(F->getContext())));
// Push any varargs arguments on the list.
for (; AI != CS.arg_end(); ++AI, ++ArgIndex) {
Args.push_back(*AI);
if (Attributes Attrs = CallPAL.getParamAttributes(ArgIndex))
AttributesVec.push_back(AttributeWithIndex::get(Args.size(), Attrs));
}
// Add any function attributes.
if (Attributes attrs = CallPAL.getFnAttributes())
AttributesVec.push_back(AttributeWithIndex::get(~0, attrs));
Instruction *New;
if (InvokeInst *II = dyn_cast<InvokeInst>(Call)) {
New = InvokeInst::Create(NF, II->getNormalDest(), II->getUnwindDest(),
Args.begin(), Args.end(), "", Call);
cast<InvokeInst>(New)->setCallingConv(CS.getCallingConv());
cast<InvokeInst>(New)->setAttributes(AttrListPtr::get(AttributesVec.begin(),
AttributesVec.end()));
} else {
New = CallInst::Create(NF, Args.begin(), Args.end(), "", Call);
cast<CallInst>(New)->setCallingConv(CS.getCallingConv());
cast<CallInst>(New)->setAttributes(AttrListPtr::get(AttributesVec.begin(),
AttributesVec.end()));
if (cast<CallInst>(Call)->isTailCall())
cast<CallInst>(New)->setTailCall();
}
Args.clear();
AttributesVec.clear();
// Update the alias analysis implementation to know that we are replacing
// the old call with a new one.
AA.replaceWithNewValue(Call, New);
// Update the callgraph to know that the callsite has been transformed.
CallGraphNode *CalleeNode = CG[Call->getParent()->getParent()];
CalleeNode->replaceCallEdge(Call, New, NF_CGN);
if (!Call->use_empty()) {
Call->replaceAllUsesWith(New);
New->takeName(Call);
}
// Finally, remove the old call from the program, reducing the use-count of
// F.
Call->eraseFromParent();
}
// Since we have now created the new function, splice the body of the old
// function right into the new function, leaving the old rotting hulk of the
// function empty.
NF->getBasicBlockList().splice(NF->begin(), F->getBasicBlockList());
// Loop over the argument list, transfering uses of the old arguments over to
// the new arguments, also transfering over the names as well.
//
for (Function::arg_iterator I = F->arg_begin(), E = F->arg_end(),
I2 = NF->arg_begin(); I != E; ++I) {
if (!ArgsToPromote.count(I) && !ByValArgsToTransform.count(I)) {
// If this is an unmodified argument, move the name and users over to the
// new version.
I->replaceAllUsesWith(I2);
I2->takeName(I);
AA.replaceWithNewValue(I, I2);
++I2;
continue;
}
if (ByValArgsToTransform.count(I)) {
// In the callee, we create an alloca, and store each of the new incoming
// arguments into the alloca.
Instruction *InsertPt = NF->begin()->begin();
// Just add all the struct element types.
const Type *AgTy = cast<PointerType>(I->getType())->getElementType();
Value *TheAlloca = new AllocaInst(AgTy, 0, "", InsertPt);
const StructType *STy = cast<StructType>(AgTy);
Value *Idxs[2] = {
ConstantInt::get(Type::getInt32Ty(F->getContext()), 0), 0 };
for (unsigned i = 0, e = STy->getNumElements(); i != e; ++i) {
Idxs[1] = ConstantInt::get(Type::getInt32Ty(F->getContext()), i);
Value *Idx =
GetElementPtrInst::Create(TheAlloca, Idxs, Idxs+2,
TheAlloca->getName()+"."+Twine(i),
InsertPt);
I2->setName(I->getName()+"."+Twine(i));
new StoreInst(I2++, Idx, InsertPt);
}
// Anything that used the arg should now use the alloca.
I->replaceAllUsesWith(TheAlloca);
TheAlloca->takeName(I);
AA.replaceWithNewValue(I, TheAlloca);
continue;
}
if (I->use_empty()) {
AA.deleteValue(I);
continue;
}
// Otherwise, if we promoted this argument, then all users are load
// instructions (or GEPs with only load users), and all loads should be
// using the new argument that we added.
ScalarizeTable &ArgIndices = ScalarizedElements[I];
while (!I->use_empty()) {
if (LoadInst *LI = dyn_cast<LoadInst>(I->use_back())) {
assert(ArgIndices.begin()->empty() &&
"Load element should sort to front!");
I2->setName(I->getName()+".val");
LI->replaceAllUsesWith(I2);
AA.replaceWithNewValue(LI, I2);
LI->eraseFromParent();
DEBUG(dbgs() << "*** Promoted load of argument '" << I->getName()
<< "' in function '" << F->getName() << "'\n");
} else {
GetElementPtrInst *GEP = cast<GetElementPtrInst>(I->use_back());
IndicesVector Operands;
Operands.reserve(GEP->getNumIndices());
for (User::op_iterator II = GEP->idx_begin(), IE = GEP->idx_end();
II != IE; ++II)
Operands.push_back(cast<ConstantInt>(*II)->getSExtValue());
// GEPs with a single 0 index can be merged with direct loads
if (Operands.size() == 1 && Operands.front() == 0)
Operands.clear();
Function::arg_iterator TheArg = I2;
for (ScalarizeTable::iterator It = ArgIndices.begin();
*It != Operands; ++It, ++TheArg) {
assert(It != ArgIndices.end() && "GEP not handled??");
}
std::string NewName = I->getName();
for (unsigned i = 0, e = Operands.size(); i != e; ++i) {
NewName += "." + utostr(Operands[i]);
}
NewName += ".val";
TheArg->setName(NewName);
DEBUG(dbgs() << "*** Promoted agg argument '" << TheArg->getName()
<< "' of function '" << NF->getName() << "'\n");
// All of the uses must be load instructions. Replace them all with
// the argument specified by ArgNo.
while (!GEP->use_empty()) {
LoadInst *L = cast<LoadInst>(GEP->use_back());
L->replaceAllUsesWith(TheArg);
AA.replaceWithNewValue(L, TheArg);
L->eraseFromParent();
}
AA.deleteValue(GEP);
GEP->eraseFromParent();
}
}
// Increment I2 past all of the arguments added for this promoted pointer.
for (unsigned i = 0, e = ArgIndices.size(); i != e; ++i)
++I2;
}
// Notify the alias analysis implementation that we inserted a new argument.
if (ExtraArgHack)
AA.copyValue(Constant::getNullValue(Type::getInt32Ty(F->getContext())),
NF->arg_begin());
// Tell the alias analysis that the old function is about to disappear.
AA.replaceWithNewValue(F, NF);
NF_CGN->stealCalledFunctionsFrom(CG[F]);
// Now that the old function is dead, delete it. If there is a dangling
// reference to the CallgraphNode, just leave the dead function around for
// someone else to nuke.
CallGraphNode *CGN = CG[F];
if (CGN->getNumReferences() == 0)
delete CG.removeFunctionFromModule(CGN);
else
F->setLinkage(Function::ExternalLinkage);
return NF_CGN;
}
void llvm::InsertProfilingInitCall(Function *MainFn, const char *FnName,
GlobalValue *Array) {
const Type *ArgVTy =
PointerType::getUnqual(PointerType::getUnqual(Type::Int8Ty));
const PointerType *UIntPtr = PointerType::getUnqual(Type::Int32Ty);
Module &M = *MainFn->getParent();
Constant *InitFn = M.getOrInsertFunction(FnName, Type::Int32Ty, Type::Int32Ty,
ArgVTy, UIntPtr, Type::Int32Ty,
(Type *)0);
// This could force argc and argv into programs that wouldn't otherwise have
// them, but instead we just pass null values in.
std::vector<Value*> Args(4);
Args[0] = Constant::getNullValue(Type::Int32Ty);
Args[1] = Constant::getNullValue(ArgVTy);
// Skip over any allocas in the entry block.
BasicBlock *Entry = MainFn->begin();
BasicBlock::iterator InsertPos = Entry->begin();
while (isa<AllocaInst>(InsertPos)) ++InsertPos;
std::vector<Constant*> GEPIndices(2, Constant::getNullValue(Type::Int32Ty));
unsigned NumElements = 0;
if (Array) {
Args[2] = ConstantExpr::getGetElementPtr(Array, &GEPIndices[0],
GEPIndices.size());
NumElements =
cast<ArrayType>(Array->getType()->getElementType())->getNumElements();
} else {
// If this profiling instrumentation doesn't have a constant array, just
// pass null.
Args[2] = ConstantPointerNull::get(UIntPtr);
}
Args[3] = ConstantInt::get(Type::Int32Ty, NumElements);
Instruction *InitCall = CallInst::Create(InitFn, Args.begin(), Args.end(),
"newargc", InsertPos);
// If argc or argv are not available in main, just pass null values in.
Function::arg_iterator AI;
switch (MainFn->arg_size()) {
default:
case 2:
AI = MainFn->arg_begin(); ++AI;
if (AI->getType() != ArgVTy) {
Instruction::CastOps opcode = CastInst::getCastOpcode(AI, false, ArgVTy,
false);
InitCall->setOperand(2,
CastInst::create(opcode, AI, ArgVTy, "argv.cast", InitCall));
} else {
InitCall->setOperand(2, AI);
}
/* FALL THROUGH */
case 1:
AI = MainFn->arg_begin();
// If the program looked at argc, have it look at the return value of the
// init call instead.
if (AI->getType() != Type::Int32Ty) {
Instruction::CastOps opcode;
if (!AI->use_empty()) {
opcode = CastInst::getCastOpcode(InitCall, true, AI->getType(), true);
AI->replaceAllUsesWith(
CastInst::create(opcode, InitCall, AI->getType(), "", InsertPos));
}
opcode = CastInst::getCastOpcode(AI, true, Type::Int32Ty, true);
InitCall->setOperand(1,
CastInst::create(opcode, AI, Type::Int32Ty, "argc.cast", InitCall));
} else {
AI->replaceAllUsesWith(InitCall);
InitCall->setOperand(1, AI);
}
case 0: break;
}
}
/// PropagateConstantsIntoArguments - Look at all uses of the specified
/// function. If all uses are direct call sites, and all pass a particular
/// constant in for an argument, propagate that constant in as the argument.
///
bool IPCP::PropagateConstantsIntoArguments(Function &F) {
if (F.arg_empty() || F.use_empty()) return false; // No arguments? Early exit.
// For each argument, keep track of its constant value and whether it is a
// constant or not. The bool is driven to true when found to be non-constant.
SmallVector<std::pair<Constant*, bool>, 16> ArgumentConstants;
ArgumentConstants.resize(F.arg_size());
unsigned NumNonconstant = 0;
for (Value::use_iterator UI = F.use_begin(), E = F.use_end(); UI != E; ++UI) {
User *U = *UI;
// Ignore blockaddress uses.
if (isa<BlockAddress>(U)) continue;
// Used by a non-instruction, or not the callee of a function, do not
// transform.
if (!isa<CallInst>(U) && !isa<InvokeInst>(U))
return false;
CallSite CS(cast<Instruction>(U));
if (!CS.isCallee(UI))
return false;
// Check out all of the potentially constant arguments. Note that we don't
// inspect varargs here.
CallSite::arg_iterator AI = CS.arg_begin();
Function::arg_iterator Arg = F.arg_begin();
for (unsigned i = 0, e = ArgumentConstants.size(); i != e;
++i, ++AI, ++Arg) {
// If this argument is known non-constant, ignore it.
if (ArgumentConstants[i].second)
continue;
Constant *C = dyn_cast<Constant>(*AI);
if (C && ArgumentConstants[i].first == 0) {
ArgumentConstants[i].first = C; // First constant seen.
} else if (C && ArgumentConstants[i].first == C) {
// Still the constant value we think it is.
} else if (*AI == &*Arg) {
// Ignore recursive calls passing argument down.
} else {
// Argument became non-constant. If all arguments are non-constant now,
// give up on this function.
if (++NumNonconstant == ArgumentConstants.size())
return false;
ArgumentConstants[i].second = true;
}
}
}
// If we got to this point, there is a constant argument!
assert(NumNonconstant != ArgumentConstants.size());
bool MadeChange = false;
Function::arg_iterator AI = F.arg_begin();
for (unsigned i = 0, e = ArgumentConstants.size(); i != e; ++i, ++AI) {
// Do we have a constant argument?
if (ArgumentConstants[i].second || AI->use_empty() ||
(AI->hasByValAttr() && !F.onlyReadsMemory()))
continue;
Value *V = ArgumentConstants[i].first;
if (V == 0) V = UndefValue::get(AI->getType());
AI->replaceAllUsesWith(V);
++NumArgumentsProped;
MadeChange = true;
}
return MadeChange;
}
//
// Method: runOnModule()
//
// Description:
// Entry point for this LLVM pass.
// Clone functions that take GEPs as arguments
//
// Inputs:
// M - A reference to the LLVM module to transform
//
// Outputs:
// M - The transformed LLVM module.
//
// Return value:
// true - The module was modified.
// false - The module was not modified.
//
bool GEPExprArgs::runOnModule(Module& M) {
bool changed;
do {
changed = false;
for (Module::iterator F = M.begin(); F != M.end(); ++F){
for (Function::iterator B = F->begin(), FE = F->end(); B != FE; ++B) {
for (BasicBlock::iterator I = B->begin(), BE = B->end(); I != BE;) {
CallInst *CI = dyn_cast<CallInst>(I++);
if(!CI)
continue;
if(CI->hasByValArgument())
continue;
// if the GEP calls a function, that is externally defined,
// or might be changed, ignore this call site.
Function *F = CI->getCalledFunction();
if (!F || (F->isDeclaration() || F->mayBeOverridden()))
continue;
if(F->hasStructRetAttr())
continue;
if(F->isVarArg())
continue;
// find the argument we must replace
Function::arg_iterator ai = F->arg_begin(), ae = F->arg_end();
unsigned argNum = 1;
for(; argNum < CI->getNumOperands();argNum++, ++ai) {
if(ai->use_empty())
continue;
if (isa<GEPOperator>(CI->getOperand(argNum)))
break;
}
// if no argument was a GEP operator to be changed
if(ai == ae)
continue;
GEPOperator *GEP = dyn_cast<GEPOperator>(CI->getOperand(argNum));
if(!GEP->hasAllConstantIndices())
continue;
// Construct the new Type
// Appends the struct Type at the beginning
std::vector<Type*>TP;
TP.push_back(GEP->getPointerOperand()->getType());
for(unsigned c = 1; c < CI->getNumOperands();c++) {
TP.push_back(CI->getOperand(c)->getType());
}
//return type is same as that of original instruction
FunctionType *NewFTy = FunctionType::get(CI->getType(), TP, false);
Function *NewF;
numSimplified++;
if(numSimplified > 800)
return true;
NewF = Function::Create(NewFTy,
GlobalValue::InternalLinkage,
F->getName().str() + ".TEST",
&M);
Function::arg_iterator NI = NewF->arg_begin();
NI->setName("GEParg");
++NI;
ValueToValueMapTy ValueMap;
for (Function::arg_iterator II = F->arg_begin(); NI != NewF->arg_end(); ++II, ++NI) {
ValueMap[II] = NI;
NI->setName(II->getName());
NI->addAttr(F->getAttributes().getParamAttributes(II->getArgNo() + 1));
}
NewF->setAttributes(NewF->getAttributes().addAttr(
0, F->getAttributes().getRetAttributes()));
// Perform the cloning.
SmallVector<ReturnInst*,100> Returns;
CloneFunctionInto(NewF, F, ValueMap, false, Returns);
std::vector<Value*> fargs;
for(Function::arg_iterator ai = NewF->arg_begin(),
ae= NewF->arg_end(); ai != ae; ++ai) {
fargs.push_back(ai);
}
NewF->setAttributes(NewF->getAttributes().addAttr(
~0, F->getAttributes().getFnAttributes()));
//Get the point to insert the GEP instr.
SmallVector<Value*, 8> Ops(CI->op_begin()+1, CI->op_end());
Instruction *InsertPoint;
for (BasicBlock::iterator insrt = NewF->front().begin();
isa<AllocaInst>(InsertPoint = insrt); ++insrt) {;}
NI = NewF->arg_begin();
SmallVector<Value*, 8> Indices;
Indices.append(GEP->op_begin()+1, GEP->op_end());
GetElementPtrInst *GEP_new = GetElementPtrInst::Create(cast<Value>(NI),
Indices,
"", InsertPoint);
fargs.at(argNum)->replaceAllUsesWith(GEP_new);
unsigned j = argNum + 1;
for(; j < CI->getNumOperands();j++) {
if(CI->getOperand(j) == GEP)
fargs.at(j)->replaceAllUsesWith(GEP_new);
}
SmallVector<AttributeWithIndex, 8> AttributesVec;
// Get the initial attributes of the call
AttrListPtr CallPAL = CI->getAttributes();
Attributes RAttrs = CallPAL.getRetAttributes();
Attributes FnAttrs = CallPAL.getFnAttributes();
if (RAttrs)
AttributesVec.push_back(AttributeWithIndex::get(0, RAttrs));
SmallVector<Value*, 8> Args;
Args.push_back(GEP->getPointerOperand());
for(unsigned j =1;j<CI->getNumOperands();j++) {
Args.push_back(CI->getOperand(j));
// position in the AttributesVec
if (Attributes Attrs = CallPAL.getParamAttributes(j))
AttributesVec.push_back(AttributeWithIndex::get(Args.size(), Attrs));
}
// Create the new attributes vec.
if (FnAttrs != Attribute::None)
AttributesVec.push_back(AttributeWithIndex::get(~0, FnAttrs));
AttrListPtr NewCallPAL = AttrListPtr::get(AttributesVec.begin(),
AttributesVec.end());
CallInst *CallI = CallInst::Create(NewF,Args,"", CI);
CallI->setCallingConv(CI->getCallingConv());
CallI->setAttributes(NewCallPAL);
CI->replaceAllUsesWith(CallI);
CI->eraseFromParent();
changed = true;
}
}
}
} while(changed);
return true;
}
/// LowerArguments - V8 uses a very simple ABI, where all values are passed in
/// either one or two GPRs, including FP values. TODO: we should pass FP values
/// in FP registers for fastcc functions.
void
SparcTargetLowering::LowerArguments(Function &F, SelectionDAG &DAG,
SmallVectorImpl<SDValue> &ArgValues,
DebugLoc dl) {
MachineFunction &MF = DAG.getMachineFunction();
MachineRegisterInfo &RegInfo = MF.getRegInfo();
static const unsigned ArgRegs[] = {
SP::I0, SP::I1, SP::I2, SP::I3, SP::I4, SP::I5
};
const unsigned *CurArgReg = ArgRegs, *ArgRegEnd = ArgRegs+6;
unsigned ArgOffset = 68;
SDValue Root = DAG.getRoot();
std::vector<SDValue> OutChains;
for (Function::arg_iterator I = F.arg_begin(), E = F.arg_end(); I != E; ++I) {
MVT ObjectVT = getValueType(I->getType());
switch (ObjectVT.getSimpleVT()) {
default: assert(0 && "Unhandled argument type!");
case MVT::i1:
case MVT::i8:
case MVT::i16:
case MVT::i32:
if (I->use_empty()) { // Argument is dead.
if (CurArgReg < ArgRegEnd) ++CurArgReg;
ArgValues.push_back(DAG.getUNDEF(ObjectVT));
} else if (CurArgReg < ArgRegEnd) { // Lives in an incoming GPR
unsigned VReg = RegInfo.createVirtualRegister(&SP::IntRegsRegClass);
MF.getRegInfo().addLiveIn(*CurArgReg++, VReg);
SDValue Arg = DAG.getCopyFromReg(Root, dl, VReg, MVT::i32);
if (ObjectVT != MVT::i32) {
unsigned AssertOp = ISD::AssertSext;
Arg = DAG.getNode(AssertOp, dl, MVT::i32, Arg,
DAG.getValueType(ObjectVT));
Arg = DAG.getNode(ISD::TRUNCATE, dl, ObjectVT, Arg);
}
ArgValues.push_back(Arg);
} else {
int FrameIdx = MF.getFrameInfo()->CreateFixedObject(4, ArgOffset);
SDValue FIPtr = DAG.getFrameIndex(FrameIdx, MVT::i32);
SDValue Load;
if (ObjectVT == MVT::i32) {
Load = DAG.getLoad(MVT::i32, dl, Root, FIPtr, NULL, 0);
} else {
ISD::LoadExtType LoadOp = ISD::SEXTLOAD;
// Sparc is big endian, so add an offset based on the ObjectVT.
unsigned Offset = 4-std::max(1U, ObjectVT.getSizeInBits()/8);
FIPtr = DAG.getNode(ISD::ADD, dl, MVT::i32, FIPtr,
DAG.getConstant(Offset, MVT::i32));
Load = DAG.getExtLoad(LoadOp, dl, MVT::i32, Root, FIPtr,
NULL, 0, ObjectVT);
Load = DAG.getNode(ISD::TRUNCATE, dl, ObjectVT, Load);
}
ArgValues.push_back(Load);
}
ArgOffset += 4;
break;
case MVT::f32:
if (I->use_empty()) { // Argument is dead.
if (CurArgReg < ArgRegEnd) ++CurArgReg;
ArgValues.push_back(DAG.getUNDEF(ObjectVT));
} else if (CurArgReg < ArgRegEnd) { // Lives in an incoming GPR
// FP value is passed in an integer register.
unsigned VReg = RegInfo.createVirtualRegister(&SP::IntRegsRegClass);
MF.getRegInfo().addLiveIn(*CurArgReg++, VReg);
SDValue Arg = DAG.getCopyFromReg(Root, dl, VReg, MVT::i32);
Arg = DAG.getNode(ISD::BIT_CONVERT, dl, MVT::f32, Arg);
ArgValues.push_back(Arg);
} else {
int FrameIdx = MF.getFrameInfo()->CreateFixedObject(4, ArgOffset);
SDValue FIPtr = DAG.getFrameIndex(FrameIdx, MVT::i32);
SDValue Load = DAG.getLoad(MVT::f32, dl, Root, FIPtr, NULL, 0);
ArgValues.push_back(Load);
}
ArgOffset += 4;
break;
case MVT::i64:
case MVT::f64:
if (I->use_empty()) { // Argument is dead.
if (CurArgReg < ArgRegEnd) ++CurArgReg;
if (CurArgReg < ArgRegEnd) ++CurArgReg;
ArgValues.push_back(DAG.getUNDEF(ObjectVT));
} else {
SDValue HiVal;
if (CurArgReg < ArgRegEnd) { // Lives in an incoming GPR
unsigned VRegHi = RegInfo.createVirtualRegister(&SP::IntRegsRegClass);
MF.getRegInfo().addLiveIn(*CurArgReg++, VRegHi);
HiVal = DAG.getCopyFromReg(Root, dl, VRegHi, MVT::i32);
} else {
int FrameIdx = MF.getFrameInfo()->CreateFixedObject(4, ArgOffset);
SDValue FIPtr = DAG.getFrameIndex(FrameIdx, MVT::i32);
HiVal = DAG.getLoad(MVT::i32, dl, Root, FIPtr, NULL, 0);
}
SDValue LoVal;
if (CurArgReg < ArgRegEnd) { // Lives in an incoming GPR
unsigned VRegLo = RegInfo.createVirtualRegister(&SP::IntRegsRegClass);
MF.getRegInfo().addLiveIn(*CurArgReg++, VRegLo);
LoVal = DAG.getCopyFromReg(Root, dl, VRegLo, MVT::i32);
} else {
int FrameIdx = MF.getFrameInfo()->CreateFixedObject(4, ArgOffset+4);
SDValue FIPtr = DAG.getFrameIndex(FrameIdx, MVT::i32);
LoVal = DAG.getLoad(MVT::i32, dl, Root, FIPtr, NULL, 0);
}
// Compose the two halves together into an i64 unit.
SDValue WholeValue =
DAG.getNode(ISD::BUILD_PAIR, dl, MVT::i64, LoVal, HiVal);
// If we want a double, do a bit convert.
if (ObjectVT == MVT::f64)
WholeValue = DAG.getNode(ISD::BIT_CONVERT, dl, MVT::f64, WholeValue);
ArgValues.push_back(WholeValue);
}
ArgOffset += 8;
break;
}
}
// Store remaining ArgRegs to the stack if this is a varargs function.
if (F.isVarArg()) {
// Remember the vararg offset for the va_start implementation.
VarArgsFrameOffset = ArgOffset;
for (; CurArgReg != ArgRegEnd; ++CurArgReg) {
unsigned VReg = RegInfo.createVirtualRegister(&SP::IntRegsRegClass);
MF.getRegInfo().addLiveIn(*CurArgReg, VReg);
SDValue Arg = DAG.getCopyFromReg(DAG.getRoot(), dl, VReg, MVT::i32);
int FrameIdx = MF.getFrameInfo()->CreateFixedObject(4, ArgOffset);
SDValue FIPtr = DAG.getFrameIndex(FrameIdx, MVT::i32);
OutChains.push_back(DAG.getStore(DAG.getRoot(), dl, Arg, FIPtr, NULL, 0));
ArgOffset += 4;
}
}
if (!OutChains.empty())
DAG.setRoot(DAG.getNode(ISD::TokenFactor, dl, MVT::Other,
&OutChains[0], OutChains.size()));
}
//
// Method: runOnModule()
//
// Description:
// Entry point for this LLVM pass.
// Clone functions that take LoadInsts as arguments
//
// Inputs:
// M - A reference to the LLVM module to transform
//
// Outputs:
// M - The transformed LLVM module.
//
// Return value:
// true - The module was modified.
// false - The module was not modified.
//
bool LoadArgs::runOnModule(Module& M) {
std::map<std::pair<Function*, const Type * > , Function* > fnCache;
bool changed;
do {
changed = false;
for (Module::iterator Func = M.begin(); Func != M.end(); ++Func) {
for (Function::iterator B = Func->begin(), FE = Func->end(); B != FE; ++B) {
for (BasicBlock::iterator I = B->begin(), BE = B->end(); I != BE;) {
CallInst *CI = dyn_cast<CallInst>(I++);
if(!CI)
continue;
if(CI->hasByValArgument())
continue;
// if the CallInst calls a function, that is externally defined,
// or might be changed, ignore this call site.
Function *F = CI->getCalledFunction();
if (!F || (F->isDeclaration() || F->mayBeOverridden()))
continue;
if(F->hasStructRetAttr())
continue;
if(F->isVarArg())
continue;
// find the argument we must replace
Function::arg_iterator ai = F->arg_begin(), ae = F->arg_end();
unsigned argNum = 0;
for(; argNum < CI->getNumArgOperands();argNum++, ++ai) {
// do not care about dead arguments
if(ai->use_empty())
continue;
if(F->getAttributes().getParamAttributes(argNum).hasAttrSomewhere(Attribute::SExt) ||
F->getAttributes().getParamAttributes(argNum).hasAttrSomewhere(Attribute::ZExt))
continue;
if (isa<LoadInst>(CI->getArgOperand(argNum)))
break;
}
// if no argument was a GEP operator to be changed
if(ai == ae)
continue;
LoadInst *LI = dyn_cast<LoadInst>(CI->getArgOperand(argNum));
Instruction * InsertPt = &(Func->getEntryBlock().front());
AllocaInst *NewVal = new AllocaInst(LI->getType(), "",InsertPt);
StoreInst *Copy = new StoreInst(LI, NewVal);
Copy->insertAfter(LI);
/*if(LI->getParent() != CI->getParent())
continue;
// Also check that there is no store after the load.
// TODO: Check if the load/store do not alias.
BasicBlock::iterator bii = LI->getParent()->begin();
Instruction *BII = bii;
while(BII != LI) {
++bii;
BII = bii;
}
while(BII != CI) {
if(isa<StoreInst>(BII))
break;
++bii;
BII = bii;
}
if(isa<StoreInst>(bii)){
continue;
}*/
// Construct the new Type
// Appends the struct Type at the beginning
std::vector<Type*>TP;
for(unsigned c = 0; c < CI->getNumArgOperands();c++) {
if(c == argNum)
TP.push_back(LI->getPointerOperand()->getType());
TP.push_back(CI->getArgOperand(c)->getType());
}
//return type is same as that of original instruction
FunctionType *NewFTy = FunctionType::get(CI->getType(), TP, false);
numSimplified++;
//if(numSimplified > 1000)
//return true;
Function *NewF;
std::map<std::pair<Function*, const Type* > , Function* >::iterator Test;
Test = fnCache.find(std::make_pair(F, NewFTy));
if(Test != fnCache.end()) {
NewF = Test->second;
} else {
NewF = Function::Create(NewFTy,
GlobalValue::InternalLinkage,
F->getName().str() + ".TEST",
&M);
fnCache[std::make_pair(F, NewFTy)] = NewF;
Function::arg_iterator NI = NewF->arg_begin();
ValueToValueMapTy ValueMap;
unsigned count = 0;
for (Function::arg_iterator II = F->arg_begin(); NI != NewF->arg_end(); ++count, ++NI) {
if(count == argNum) {
NI->setName("LDarg");
continue;
}
ValueMap[II] = NI;
NI->setName(II->getName());
NI->addAttr(F->getAttributes().getParamAttributes(II->getArgNo() + 1));
++II;
}
// Perform the cloning.
SmallVector<ReturnInst*,100> Returns;
CloneFunctionInto(NewF, F, ValueMap, false, Returns);
std::vector<Value*> fargs;
for(Function::arg_iterator ai = NewF->arg_begin(),
ae= NewF->arg_end(); ai != ae; ++ai) {
fargs.push_back(ai);
}
NewF->setAttributes(NewF->getAttributes().addAttributes(
F->getContext(), 0, F->getAttributes().getRetAttributes()));
NewF->setAttributes(NewF->getAttributes().addAttributes(
F->getContext(), ~0, F->getAttributes().getFnAttributes()));
//Get the point to insert the GEP instr.
Instruction *InsertPoint;
for (BasicBlock::iterator insrt = NewF->front().begin(); isa<AllocaInst>(InsertPoint = insrt); ++insrt) {;}
LoadInst *LI_new = new LoadInst(fargs.at(argNum), "", InsertPoint);
fargs.at(argNum+1)->replaceAllUsesWith(LI_new);
}
//this does not seem to be a good idea
AttributeSet NewCallPAL=AttributeSet();
// Get the initial attributes of the call
AttributeSet CallPAL = CI->getAttributes();
AttributeSet RAttrs = CallPAL.getRetAttributes();
AttributeSet FnAttrs = CallPAL.getFnAttributes();
if (!RAttrs.isEmpty())
NewCallPAL=NewCallPAL.addAttributes(F->getContext(),0, RAttrs);
SmallVector<Value*, 8> Args;
for(unsigned j =0;j<CI->getNumArgOperands();j++) {
if(j == argNum) {
Args.push_back(NewVal);
}
Args.push_back(CI->getArgOperand(j));
// position in the NewCallPAL
AttributeSet Attrs = CallPAL.getParamAttributes(j+1);
if (!Attrs.isEmpty())
NewCallPAL=NewCallPAL.addAttributes(F->getContext(),Args.size(), Attrs);
}
// Create the new attributes vec.
if (!FnAttrs.isEmpty())
NewCallPAL=NewCallPAL.addAttributes(F->getContext(),~0, FnAttrs);
CallInst *CallI = CallInst::Create(NewF,Args,"", CI);
CallI->setCallingConv(CI->getCallingConv());
CallI->setAttributes(NewCallPAL);
CI->replaceAllUsesWith(CallI);
CI->eraseFromParent();
changed = true;
}
}
}
} while(changed);
return true;
}
/// DoPromotion - This method actually performs the promotion of the specified
/// arguments, and returns the new function. At this point, we know that it's
/// safe to do so.
static Function *
doPromotion(Function *F, SmallPtrSetImpl<Argument *> &ArgsToPromote,
SmallPtrSetImpl<Argument *> &ByValArgsToTransform,
Optional<function_ref<void(CallSite OldCS, CallSite NewCS)>>
ReplaceCallSite) {
// Start by computing a new prototype for the function, which is the same as
// the old function, but has modified arguments.
FunctionType *FTy = F->getFunctionType();
std::vector<Type *> Params;
using ScalarizeTable = std::set<std::pair<Type *, IndicesVector>>;
// ScalarizedElements - If we are promoting a pointer that has elements
// accessed out of it, keep track of which elements are accessed so that we
// can add one argument for each.
//
// Arguments that are directly loaded will have a zero element value here, to
// handle cases where there are both a direct load and GEP accesses.
std::map<Argument *, ScalarizeTable> ScalarizedElements;
// OriginalLoads - Keep track of a representative load instruction from the
// original function so that we can tell the alias analysis implementation
// what the new GEP/Load instructions we are inserting look like.
// We need to keep the original loads for each argument and the elements
// of the argument that are accessed.
std::map<std::pair<Argument *, IndicesVector>, LoadInst *> OriginalLoads;
// Attribute - Keep track of the parameter attributes for the arguments
// that we are *not* promoting. For the ones that we do promote, the parameter
// attributes are lost
SmallVector<AttributeSet, 8> ArgAttrVec;
AttributeList PAL = F->getAttributes();
// First, determine the new argument list
unsigned ArgNo = 0;
for (Function::arg_iterator I = F->arg_begin(), E = F->arg_end(); I != E;
++I, ++ArgNo) {
if (ByValArgsToTransform.count(&*I)) {
// Simple byval argument? Just add all the struct element types.
Type *AgTy = cast<PointerType>(I->getType())->getElementType();
StructType *STy = cast<StructType>(AgTy);
Params.insert(Params.end(), STy->element_begin(), STy->element_end());
ArgAttrVec.insert(ArgAttrVec.end(), STy->getNumElements(),
AttributeSet());
++NumByValArgsPromoted;
} else if (!ArgsToPromote.count(&*I)) {
// Unchanged argument
Params.push_back(I->getType());
ArgAttrVec.push_back(PAL.getParamAttributes(ArgNo));
} else if (I->use_empty()) {
// Dead argument (which are always marked as promotable)
++NumArgumentsDead;
// There may be remaining metadata uses of the argument for things like
// llvm.dbg.value. Replace them with undef.
I->replaceAllUsesWith(UndefValue::get(I->getType()));
} else {
// Okay, this is being promoted. This means that the only uses are loads
// or GEPs which are only used by loads
// In this table, we will track which indices are loaded from the argument
// (where direct loads are tracked as no indices).
ScalarizeTable &ArgIndices = ScalarizedElements[&*I];
for (User *U : I->users()) {
Instruction *UI = cast<Instruction>(U);
Type *SrcTy;
if (LoadInst *L = dyn_cast<LoadInst>(UI))
SrcTy = L->getType();
else
SrcTy = cast<GetElementPtrInst>(UI)->getSourceElementType();
IndicesVector Indices;
Indices.reserve(UI->getNumOperands() - 1);
// Since loads will only have a single operand, and GEPs only a single
// non-index operand, this will record direct loads without any indices,
// and gep+loads with the GEP indices.
for (User::op_iterator II = UI->op_begin() + 1, IE = UI->op_end();
II != IE; ++II)
Indices.push_back(cast<ConstantInt>(*II)->getSExtValue());
// GEPs with a single 0 index can be merged with direct loads
if (Indices.size() == 1 && Indices.front() == 0)
Indices.clear();
ArgIndices.insert(std::make_pair(SrcTy, Indices));
LoadInst *OrigLoad;
if (LoadInst *L = dyn_cast<LoadInst>(UI))
OrigLoad = L;
else
// Take any load, we will use it only to update Alias Analysis
OrigLoad = cast<LoadInst>(UI->user_back());
OriginalLoads[std::make_pair(&*I, Indices)] = OrigLoad;
}
// Add a parameter to the function for each element passed in.
for (const auto &ArgIndex : ArgIndices) {
// not allowed to dereference ->begin() if size() is 0
Params.push_back(GetElementPtrInst::getIndexedType(
cast<PointerType>(I->getType()->getScalarType())->getElementType(),
ArgIndex.second));
ArgAttrVec.push_back(AttributeSet());
assert(Params.back());
}
if (ArgIndices.size() == 1 && ArgIndices.begin()->second.empty())
++NumArgumentsPromoted;
else
++NumAggregatesPromoted;
}
}
Type *RetTy = FTy->getReturnType();
// Construct the new function type using the new arguments.
FunctionType *NFTy = FunctionType::get(RetTy, Params, FTy->isVarArg());
// Create the new function body and insert it into the module.
Function *NF = Function::Create(NFTy, F->getLinkage(), F->getName());
NF->copyAttributesFrom(F);
// Patch the pointer to LLVM function in debug info descriptor.
NF->setSubprogram(F->getSubprogram());
F->setSubprogram(nullptr);
DEBUG(dbgs() << "ARG PROMOTION: Promoting to:" << *NF << "\n"
<< "From: " << *F);
// Recompute the parameter attributes list based on the new arguments for
// the function.
NF->setAttributes(AttributeList::get(F->getContext(), PAL.getFnAttributes(),
PAL.getRetAttributes(), ArgAttrVec));
ArgAttrVec.clear();
F->getParent()->getFunctionList().insert(F->getIterator(), NF);
NF->takeName(F);
// Loop over all of the callers of the function, transforming the call sites
// to pass in the loaded pointers.
//
SmallVector<Value *, 16> Args;
while (!F->use_empty()) {
CallSite CS(F->user_back());
assert(CS.getCalledFunction() == F);
Instruction *Call = CS.getInstruction();
const AttributeList &CallPAL = CS.getAttributes();
// Loop over the operands, inserting GEP and loads in the caller as
// appropriate.
CallSite::arg_iterator AI = CS.arg_begin();
ArgNo = 0;
for (Function::arg_iterator I = F->arg_begin(), E = F->arg_end(); I != E;
++I, ++AI, ++ArgNo)
if (!ArgsToPromote.count(&*I) && !ByValArgsToTransform.count(&*I)) {
Args.push_back(*AI); // Unmodified argument
ArgAttrVec.push_back(CallPAL.getParamAttributes(ArgNo));
} else if (ByValArgsToTransform.count(&*I)) {
// Emit a GEP and load for each element of the struct.
Type *AgTy = cast<PointerType>(I->getType())->getElementType();
StructType *STy = cast<StructType>(AgTy);
Value *Idxs[2] = {
ConstantInt::get(Type::getInt32Ty(F->getContext()), 0), nullptr};
for (unsigned i = 0, e = STy->getNumElements(); i != e; ++i) {
Idxs[1] = ConstantInt::get(Type::getInt32Ty(F->getContext()), i);
Value *Idx = GetElementPtrInst::Create(
STy, *AI, Idxs, (*AI)->getName() + "." + Twine(i), Call);
// TODO: Tell AA about the new values?
Args.push_back(new LoadInst(Idx, Idx->getName() + ".val", Call));
ArgAttrVec.push_back(AttributeSet());
}
} else if (!I->use_empty()) {
// Non-dead argument: insert GEPs and loads as appropriate.
ScalarizeTable &ArgIndices = ScalarizedElements[&*I];
// Store the Value* version of the indices in here, but declare it now
// for reuse.
std::vector<Value *> Ops;
for (const auto &ArgIndex : ArgIndices) {
Value *V = *AI;
LoadInst *OrigLoad =
OriginalLoads[std::make_pair(&*I, ArgIndex.second)];
if (!ArgIndex.second.empty()) {
Ops.reserve(ArgIndex.second.size());
Type *ElTy = V->getType();
for (auto II : ArgIndex.second) {
// Use i32 to index structs, and i64 for others (pointers/arrays).
// This satisfies GEP constraints.
Type *IdxTy =
(ElTy->isStructTy() ? Type::getInt32Ty(F->getContext())
: Type::getInt64Ty(F->getContext()));
Ops.push_back(ConstantInt::get(IdxTy, II));
// Keep track of the type we're currently indexing.
if (auto *ElPTy = dyn_cast<PointerType>(ElTy))
ElTy = ElPTy->getElementType();
else
ElTy = cast<CompositeType>(ElTy)->getTypeAtIndex(II);
}
// And create a GEP to extract those indices.
V = GetElementPtrInst::Create(ArgIndex.first, V, Ops,
V->getName() + ".idx", Call);
Ops.clear();
}
// Since we're replacing a load make sure we take the alignment
// of the previous load.
LoadInst *newLoad = new LoadInst(V, V->getName() + ".val", Call);
newLoad->setAlignment(OrigLoad->getAlignment());
// Transfer the AA info too.
AAMDNodes AAInfo;
OrigLoad->getAAMetadata(AAInfo);
newLoad->setAAMetadata(AAInfo);
Args.push_back(newLoad);
ArgAttrVec.push_back(AttributeSet());
}
}
// Push any varargs arguments on the list.
for (; AI != CS.arg_end(); ++AI, ++ArgNo) {
Args.push_back(*AI);
ArgAttrVec.push_back(CallPAL.getParamAttributes(ArgNo));
}
SmallVector<OperandBundleDef, 1> OpBundles;
CS.getOperandBundlesAsDefs(OpBundles);
CallSite NewCS;
if (InvokeInst *II = dyn_cast<InvokeInst>(Call)) {
NewCS = InvokeInst::Create(NF, II->getNormalDest(), II->getUnwindDest(),
Args, OpBundles, "", Call);
} else {
auto *NewCall = CallInst::Create(NF, Args, OpBundles, "", Call);
NewCall->setTailCallKind(cast<CallInst>(Call)->getTailCallKind());
NewCS = NewCall;
}
NewCS.setCallingConv(CS.getCallingConv());
NewCS.setAttributes(
AttributeList::get(F->getContext(), CallPAL.getFnAttributes(),
CallPAL.getRetAttributes(), ArgAttrVec));
NewCS->setDebugLoc(Call->getDebugLoc());
uint64_t W;
if (Call->extractProfTotalWeight(W))
NewCS->setProfWeight(W);
Args.clear();
ArgAttrVec.clear();
// Update the callgraph to know that the callsite has been transformed.
if (ReplaceCallSite)
(*ReplaceCallSite)(CS, NewCS);
if (!Call->use_empty()) {
Call->replaceAllUsesWith(NewCS.getInstruction());
NewCS->takeName(Call);
}
// Finally, remove the old call from the program, reducing the use-count of
// F.
Call->eraseFromParent();
}
const DataLayout &DL = F->getParent()->getDataLayout();
// Since we have now created the new function, splice the body of the old
// function right into the new function, leaving the old rotting hulk of the
// function empty.
NF->getBasicBlockList().splice(NF->begin(), F->getBasicBlockList());
// Loop over the argument list, transferring uses of the old arguments over to
// the new arguments, also transferring over the names as well.
for (Function::arg_iterator I = F->arg_begin(), E = F->arg_end(),
I2 = NF->arg_begin();
I != E; ++I) {
if (!ArgsToPromote.count(&*I) && !ByValArgsToTransform.count(&*I)) {
// If this is an unmodified argument, move the name and users over to the
// new version.
I->replaceAllUsesWith(&*I2);
I2->takeName(&*I);
++I2;
continue;
}
if (ByValArgsToTransform.count(&*I)) {
// In the callee, we create an alloca, and store each of the new incoming
// arguments into the alloca.
Instruction *InsertPt = &NF->begin()->front();
// Just add all the struct element types.
Type *AgTy = cast<PointerType>(I->getType())->getElementType();
Value *TheAlloca = new AllocaInst(AgTy, DL.getAllocaAddrSpace(), nullptr,
I->getParamAlignment(), "", InsertPt);
StructType *STy = cast<StructType>(AgTy);
Value *Idxs[2] = {ConstantInt::get(Type::getInt32Ty(F->getContext()), 0),
nullptr};
for (unsigned i = 0, e = STy->getNumElements(); i != e; ++i) {
Idxs[1] = ConstantInt::get(Type::getInt32Ty(F->getContext()), i);
Value *Idx = GetElementPtrInst::Create(
AgTy, TheAlloca, Idxs, TheAlloca->getName() + "." + Twine(i),
InsertPt);
I2->setName(I->getName() + "." + Twine(i));
new StoreInst(&*I2++, Idx, InsertPt);
}
// Anything that used the arg should now use the alloca.
I->replaceAllUsesWith(TheAlloca);
TheAlloca->takeName(&*I);
// If the alloca is used in a call, we must clear the tail flag since
// the callee now uses an alloca from the caller.
for (User *U : TheAlloca->users()) {
CallInst *Call = dyn_cast<CallInst>(U);
if (!Call)
continue;
Call->setTailCall(false);
}
continue;
}
if (I->use_empty())
continue;
// Otherwise, if we promoted this argument, then all users are load
// instructions (or GEPs with only load users), and all loads should be
// using the new argument that we added.
ScalarizeTable &ArgIndices = ScalarizedElements[&*I];
while (!I->use_empty()) {
if (LoadInst *LI = dyn_cast<LoadInst>(I->user_back())) {
assert(ArgIndices.begin()->second.empty() &&
"Load element should sort to front!");
I2->setName(I->getName() + ".val");
LI->replaceAllUsesWith(&*I2);
LI->eraseFromParent();
DEBUG(dbgs() << "*** Promoted load of argument '" << I->getName()
<< "' in function '" << F->getName() << "'\n");
} else {
GetElementPtrInst *GEP = cast<GetElementPtrInst>(I->user_back());
IndicesVector Operands;
Operands.reserve(GEP->getNumIndices());
for (User::op_iterator II = GEP->idx_begin(), IE = GEP->idx_end();
II != IE; ++II)
Operands.push_back(cast<ConstantInt>(*II)->getSExtValue());
// GEPs with a single 0 index can be merged with direct loads
if (Operands.size() == 1 && Operands.front() == 0)
Operands.clear();
Function::arg_iterator TheArg = I2;
for (ScalarizeTable::iterator It = ArgIndices.begin();
It->second != Operands; ++It, ++TheArg) {
assert(It != ArgIndices.end() && "GEP not handled??");
}
std::string NewName = I->getName();
for (unsigned i = 0, e = Operands.size(); i != e; ++i) {
NewName += "." + utostr(Operands[i]);
}
NewName += ".val";
TheArg->setName(NewName);
DEBUG(dbgs() << "*** Promoted agg argument '" << TheArg->getName()
<< "' of function '" << NF->getName() << "'\n");
// All of the uses must be load instructions. Replace them all with
// the argument specified by ArgNo.
while (!GEP->use_empty()) {
LoadInst *L = cast<LoadInst>(GEP->user_back());
L->replaceAllUsesWith(&*TheArg);
L->eraseFromParent();
}
GEP->eraseFromParent();
}
}
// Increment I2 past all of the arguments added for this promoted pointer.
std::advance(I2, ArgIndices.size());
}
return NF;
}