// FIXME: why is 'transform' argument not used?
void
PrintLatex::print_pathvector(SVGOStringStream &os, Geom::PathVector const &pathv_in, const Geom::Affine & /*transform*/)
{
if (pathv_in.empty())
return;
// Geom::Affine tf=transform; // why was this here?
Geom::Affine tf_stack=m_tr_stack.top(); // and why is transform argument not used?
Geom::PathVector pathv = pathv_in * tf_stack; // generates new path, which is a bit slow, but this doesn't have to be performance optimized
os << "\\newpath\n";
for(Geom::PathVector::const_iterator it = pathv.begin(); it != pathv.end(); ++it) {
os << "\\moveto(" << it->initialPoint()[Geom::X] << "," << it->initialPoint()[Geom::Y] << ")\n";
for(Geom::Path::const_iterator cit = it->begin(); cit != it->end_open(); ++cit) {
print_2geomcurve(os, *cit);
}
if (it->closed()) {
os << "\\closepath\n";
}
}
}
/*
* Converts all segments in all paths to Geom::LineSegment or Geom::HLineSegment or
* Geom::VLineSegment or Geom::CubicBezier.
*/
Geom::PathVector
pathv_to_linear_and_cubic_beziers( Geom::PathVector const &pathv )
{
Geom::PathVector output;
for (Geom::PathVector::const_iterator pit = pathv.begin(); pit != pathv.end(); ++pit) {
output.push_back( Geom::Path() );
output.back().start( pit->initialPoint() );
output.back().close( pit->closed() );
for (Geom::Path::const_iterator cit = pit->begin(); cit != pit->end_open(); ++cit) {
if (is_straight_curve(*cit)) {
Geom::LineSegment l(cit->initialPoint(), cit->finalPoint());
output.back().append(l);
} else {
Geom::BezierCurve const *curve = dynamic_cast<Geom::BezierCurve const *>(&*cit);
if (curve && curve->order() == 3) {
Geom::CubicBezier b((*curve)[0], (*curve)[1], (*curve)[2], (*curve)[3]);
output.back().append(b);
} else {
// convert all other curve types to cubicbeziers
Geom::Path cubicbezier_path = Geom::cubicbezierpath_from_sbasis(cit->toSBasis(), 0.1);
output.back().append(cubicbezier_path);
}
}
}
}
return output;
}
/** Feeds path-creating calls to the cairo context translating them from the PathVector
* One must have done cairo_new_path(ct); before calling this function. */
void
feed_pathvector_to_cairo (cairo_t *ct, Geom::PathVector const &pathv)
{
if (pathv.empty())
return;
for(Geom::PathVector::const_iterator it = pathv.begin(); it != pathv.end(); ++it) {
feed_path_to_cairo(ct, *it);
}
}
/** Feeds path-creating calls to the cairo context translating them from the PathVector, with the given transform and shift
* One must have done cairo_new_path(ct); before calling this function. */
void
feed_pathvector_to_cairo (cairo_t *ct, Geom::PathVector const &pathv, Geom::Affine trans, Geom::OptRect area, bool optimize_stroke, double stroke_width)
{
if (!area)
return;
if (pathv.empty())
return;
for(Geom::PathVector::const_iterator it = pathv.begin(); it != pathv.end(); ++it) {
feed_path_to_cairo(ct, *it, trans, area, optimize_stroke, stroke_width);
}
}
/*
* Converts all segments in all paths to Geom::LineSegment. There is an intermediate
* stage where some may be converted to beziers. maxdisp is the maximum displacement from
* the line segment to the bezier curve; ** maxdisp is not used at this moment **.
*
* This is NOT a terribly fast method, but it should give a solution close to the one with the
* fewest points.
*/
Geom::PathVector
pathv_to_linear( Geom::PathVector const &pathv, double /*maxdisp*/)
{
Geom::PathVector output;
Geom::PathVector tmppath = pathv_to_linear_and_cubic_beziers(pathv);
// Now all path segments are either already lines, or they are beziers.
for (Geom::PathVector::const_iterator pit = tmppath.begin(); pit != tmppath.end(); ++pit) {
output.push_back( Geom::Path() );
output.back().start( pit->initialPoint() );
output.back().close( pit->closed() );
for (Geom::Path::const_iterator cit = pit->begin(); cit != pit->end_open(); ++cit) {
if (is_straight_curve(*cit)) {
Geom::LineSegment ls(cit->initialPoint(), cit->finalPoint());
output.back().append(ls);
}
else { /* all others must be Bezier curves */
Geom::BezierCurve const *curve = dynamic_cast<Geom::BezierCurve const *>(&*cit);
Geom::CubicBezier b((*curve)[0], (*curve)[1], (*curve)[2], (*curve)[3]);
std::vector<Geom::Point> bzrpoints = b.points();
Geom::Point A = bzrpoints[0];
Geom::Point B = bzrpoints[1];
Geom::Point C = bzrpoints[2];
Geom::Point D = bzrpoints[3];
std::vector<Geom::Point> pointlist;
pointlist.push_back(A);
recursive_bezier4(
A[X], A[Y],
B[X], B[Y],
C[X], C[Y],
D[X], D[Y],
pointlist,
0);
pointlist.push_back(D);
Geom::Point r1 = pointlist[0];
for (unsigned int i=1; i<pointlist.size();i++){
Geom::Point prev_r1 = r1;
r1 = pointlist[i];
Geom::LineSegment ls(prev_r1, r1);
output.back().append(ls);
}
pointlist.clear();
}
}
}
return output;
}
Geom::OptRect
bounds_exact_transformed(Geom::PathVector const & pv, Geom::Affine const & t)
{
if (pv.empty())
return Geom::OptRect();
Geom::Point initial = pv.front().initialPoint() * t;
Geom::Rect bbox(initial, initial); // obtain well defined bbox as starting point to unionWith
for (Geom::PathVector::const_iterator it = pv.begin(); it != pv.end(); ++it) {
bbox.expandTo(it->initialPoint() * t);
// don't loop including closing segment, since that segment can never increase the bbox
for (Geom::Path::const_iterator cit = it->begin(); cit != it->end_open(); ++cit) {
Geom::Curve const &c = *cit;
unsigned order = 0;
if (Geom::BezierCurve const* b = dynamic_cast<Geom::BezierCurve const*>(&c)) {
order = b->order();
}
if (order == 1) { // line segment
bbox.expandTo(c.finalPoint() * t);
// TODO: we can make the case for quadratics faster by degree elevating them to
// cubic and then taking the bbox of that.
} else if (order == 3) { // cubic bezier
Geom::CubicBezier const &cubic_bezier = static_cast<Geom::CubicBezier const&>(c);
Geom::Point c0 = cubic_bezier[0] * t;
Geom::Point c1 = cubic_bezier[1] * t;
Geom::Point c2 = cubic_bezier[2] * t;
Geom::Point c3 = cubic_bezier[3] * t;
cubic_bbox(c0[0], c0[1], c1[0], c1[1], c2[0], c2[1], c3[0], c3[1], bbox);
} else {
// should handle all not-so-easy curves:
Geom::Curve *ctemp = cit->transformed(t);
bbox.unionWith( ctemp->boundsExact());
delete ctemp;
}
}
}
//return Geom::bounds_exact(pv * t);
return bbox;
}
Geom::OptRect
bounds_exact_transformed(Geom::PathVector const & pv, Geom::Affine const & t)
{
if (pv.empty())
return Geom::OptRect();
Geom::Point initial = pv.front().initialPoint() * t;
Geom::Rect bbox(initial, initial); // obtain well defined bbox as starting point to unionWith
for (Geom::PathVector::const_iterator it = pv.begin(); it != pv.end(); ++it) {
bbox.expandTo(it->initialPoint() * t);
// don't loop including closing segment, since that segment can never increase the bbox
for (Geom::Path::const_iterator cit = it->begin(); cit != it->end_open(); ++cit) {
Geom::Curve const &c = *cit;
if( is_straight_curve(c) )
{
bbox.expandTo( c.finalPoint() * t );
}
else if(Geom::CubicBezier const *cubic_bezier = dynamic_cast<Geom::CubicBezier const *>(&c))
{
Geom::Point c0 = (*cubic_bezier)[0] * t;
Geom::Point c1 = (*cubic_bezier)[1] * t;
Geom::Point c2 = (*cubic_bezier)[2] * t;
Geom::Point c3 = (*cubic_bezier)[3] * t;
cubic_bbox( c0[0], c0[1],
c1[0], c1[1],
c2[0], c2[1],
c3[0], c3[1],
bbox );
}
else
{
// should handle all not-so-easy curves:
Geom::Curve *ctemp = cit->transformed(t);
bbox.unionWith( ctemp->boundsExact());
delete ctemp;
}
}
}
//return Geom::bounds_exact(pv * t);
return bbox;
}
/* Calculates...
and returns ... in *wind and the distance to ... in *dist.
Returns bounding box in *bbox if bbox!=NULL.
*/
void
pathv_matrix_point_bbox_wind_distance (Geom::PathVector const & pathv, Geom::Affine const &m, Geom::Point const &pt,
Geom::Rect *bbox, int *wind, Geom::Coord *dist,
Geom::Coord tolerance, Geom::Rect const *viewbox)
{
if (pathv.empty()) {
if (wind) *wind = 0;
if (dist) *dist = Geom::infinity();
return;
}
// remember last point of last curve
Geom::Point p0(0,0);
// remembering the start of subpath
Geom::Point p_start(0,0);
bool start_set = false;
for (Geom::PathVector::const_iterator it = pathv.begin(); it != pathv.end(); ++it) {
if (start_set) { // this is a new subpath
if (wind && (p0 != p_start)) // for correct fill picking, each subpath must be closed
geom_line_wind_distance (p0[X], p0[Y], p_start[X], p_start[Y], pt, wind, dist);
}
p0 = it->initialPoint() * m;
p_start = p0;
start_set = true;
if (bbox) {
bbox->expandTo(p0);
}
// loop including closing segment if path is closed
for (Geom::Path::const_iterator cit = it->begin(); cit != it->end_default(); ++cit) {
geom_curve_bbox_wind_distance(*cit, m, pt, bbox, wind, dist, tolerance, viewbox, p0);
}
}
if (start_set) {
if (wind && (p0 != p_start)) // for correct picking, each subpath must be closed
geom_line_wind_distance (p0[X], p0[Y], p_start[X], p_start[Y], pt, wind, dist);
}
}
void
LPESpiro::doEffect(SPCurve * curve)
{
using Geom::X;
using Geom::Y;
// Make copy of old path as it is changed during processing
Geom::PathVector const original_pathv = curve->get_pathvector();
guint len = curve->get_segment_count() + 2;
curve->reset();
bezctx *bc = new_bezctx_ink(curve);
spiro_cp *path = g_new (spiro_cp, len);
int ip = 0;
for(Geom::PathVector::const_iterator path_it = original_pathv.begin(); path_it != original_pathv.end(); ++path_it) {
if (path_it->empty())
continue;
// start of path
{
Geom::Point p = path_it->front().pointAt(0);
path[ip].x = p[X];
path[ip].y = p[Y];
path[ip].ty = '{' ; // for closed paths, this is overwritten
ip++;
}
// midpoints
Geom::Path::const_iterator curve_it1 = path_it->begin(); // incoming curve
Geom::Path::const_iterator curve_it2 = ++(path_it->begin()); // outgoing curve
Geom::Path::const_iterator curve_endit = path_it->end_default(); // this determines when the loop has to stop
if (path_it->closed()) {
// if the path is closed, maybe we have to stop a bit earlier because the closing line segment has zerolength.
const Geom::Curve &closingline = path_it->back_closed(); // the closing line segment is always of type Geom::LineSegment.
if (are_near(closingline.initialPoint(), closingline.finalPoint())) {
// closingline.isDegenerate() did not work, because it only checks for *exact* zero length, which goes wrong for relative coordinates and rounding errors...
// the closing line segment has zero-length. So stop before that one!
curve_endit = path_it->end_open();
}
}
while ( curve_it2 != curve_endit )
{
/* This deals with the node between curve_it1 and curve_it2.
* Loop to end_default (so without last segment), loop ends when curve_it2 hits the end
* and then curve_it1 points to end or closing segment */
Geom::Point p = curve_it1->finalPoint();
path[ip].x = p[X];
path[ip].y = p[Y];
// Determine type of spiro node this is, determined by the tangents (angles) of the curves
// TODO: see if this can be simplified by using /helpers/geom-nodetype.cpp:get_nodetype
bool this_is_line = is_straight_curve(*curve_it1);
bool next_is_line = is_straight_curve(*curve_it2);
Geom::NodeType nodetype = Geom::get_nodetype(*curve_it1, *curve_it2);
if ( nodetype == Geom::NODE_SMOOTH || nodetype == Geom::NODE_SYMM )
{
if (this_is_line && !next_is_line) {
path[ip].ty = ']';
} else if (next_is_line && !this_is_line) {
path[ip].ty = '[';
} else {
path[ip].ty = 'c';
}
} else {
path[ip].ty = 'v';
}
++curve_it1;
++curve_it2;
ip++;
}
// add last point to the spiropath
Geom::Point p = curve_it1->finalPoint();
path[ip].x = p[X];
path[ip].y = p[Y];
if (path_it->closed()) {
// curve_it1 points to the (visually) closing segment. determine the match between first and this last segment (the closing node)
Geom::NodeType nodetype = Geom::get_nodetype(*curve_it1, path_it->front());
switch (nodetype) {
case Geom::NODE_NONE: // can't happen! but if it does, it means the path isn't closed :-)
path[ip].ty = '}';
ip++;
break;
case Geom::NODE_CUSP:
path[0].ty = path[ip].ty = 'v';
break;
case Geom::NODE_SMOOTH:
case Geom::NODE_SYMM:
path[0].ty = path[ip].ty = 'c';
break;
}
} else {
// set type to path closer
path[ip].ty = '}';
ip++;
}
// run subpath through spiro
int sp_len = ip;
spiro_seg *s = run_spiro(path, sp_len);
spiro_to_bpath(s, sp_len, bc);
free(s);
ip = 0;
}
g_free (path);
}
void sp_spiro_do_effect(SPCurve *curve){
using Geom::X;
using Geom::Y;
// Make copy of old path as it is changed during processing
Geom::PathVector const original_pathv = curve->get_pathvector();
guint len = curve->get_segment_count() + 2;
curve->reset();
Spiro::spiro_cp *path = g_new (Spiro::spiro_cp, len);
int ip = 0;
for(Geom::PathVector::const_iterator path_it = original_pathv.begin(); path_it != original_pathv.end(); ++path_it) {
if (path_it->empty())
continue;
// start of path
{
Geom::Point p = path_it->initialPoint();
path[ip].x = p[X];
path[ip].y = p[Y];
path[ip].ty = '{' ; // for closed paths, this is overwritten
ip++;
}
// midpoints
Geom::Path::const_iterator curve_it1 = path_it->begin(); // incoming curve
Geom::Path::const_iterator curve_it2 = ++(path_it->begin()); // outgoing curve
Geom::Path::const_iterator curve_endit = path_it->end_default(); // this determines when the loop has to stop
while ( curve_it2 != curve_endit )
{
/* This deals with the node between curve_it1 and curve_it2.
* Loop to end_default (so without last segment), loop ends when curve_it2 hits the end
* and then curve_it1 points to end or closing segment */
Geom::Point p = curve_it1->finalPoint();
path[ip].x = p[X];
path[ip].y = p[Y];
// Determine type of spiro node this is, determined by the tangents (angles) of the curves
// TODO: see if this can be simplified by using /helpers/geom-nodetype.cpp:get_nodetype
bool this_is_line = is_straight_curve(*curve_it1);
bool next_is_line = is_straight_curve(*curve_it2);
Geom::NodeType nodetype = Geom::get_nodetype(*curve_it1, *curve_it2);
if ( nodetype == Geom::NODE_SMOOTH || nodetype == Geom::NODE_SYMM )
{
if (this_is_line && !next_is_line) {
path[ip].ty = ']';
} else if (next_is_line && !this_is_line) {
path[ip].ty = '[';
} else {
path[ip].ty = 'c';
}
} else {
path[ip].ty = 'v';
}
++curve_it1;
++curve_it2;
ip++;
}
// add last point to the spiropath
Geom::Point p = curve_it1->finalPoint();
path[ip].x = p[X];
path[ip].y = p[Y];
if (path_it->closed()) {
// curve_it1 points to the (visually) closing segment. determine the match between first and this last segment (the closing node)
Geom::NodeType nodetype = Geom::get_nodetype(*curve_it1, path_it->front());
switch (nodetype) {
case Geom::NODE_NONE: // can't happen! but if it does, it means the path isn't closed :-)
path[ip].ty = '}';
ip++;
break;
case Geom::NODE_CUSP:
path[0].ty = path[ip].ty = 'v';
break;
case Geom::NODE_SMOOTH:
case Geom::NODE_SYMM:
path[0].ty = path[ip].ty = 'c';
break;
}
} else {
// set type to path closer
path[ip].ty = '}';
ip++;
}
// run subpath through spiro
int sp_len = ip;
Spiro::spiro_run(path, sp_len, *curve);
ip = 0;
}
g_free (path);
}
void font_instance::LoadGlyph(int glyph_id)
{
if ( pFont == NULL ) {
return;
}
InitTheFace();
#ifndef USE_PANGO_WIN32
if ( !FT_IS_SCALABLE(theFace) ) {
return; // bitmap font
}
#endif
if ( id_to_no.find(glyph_id) == id_to_no.end() ) {
Geom::PathBuilder path_builder;
if ( nbGlyph >= maxGlyph ) {
maxGlyph=2*nbGlyph+1;
glyphs=(font_glyph*)realloc(glyphs,maxGlyph*sizeof(font_glyph));
}
font_glyph n_g;
n_g.pathvector=NULL;
n_g.bbox[0]=n_g.bbox[1]=n_g.bbox[2]=n_g.bbox[3]=0;
n_g.h_advance = 0;
n_g.v_advance = 0;
n_g.h_width = 0;
n_g.v_width = 0;
bool doAdd=false;
#ifdef USE_PANGO_WIN32
#ifndef GGO_UNHINTED // For compatibility with old SDKs.
#define GGO_UNHINTED 0x0100
#endif
MAT2 identity = {{0,1},{0,0},{0,0},{0,1}};
OUTLINETEXTMETRIC otm;
GetOutlineTextMetrics(daddy->hScreenDC, sizeof(otm), &otm);
GLYPHMETRICS metrics;
DWORD bufferSize=GetGlyphOutline (daddy->hScreenDC, glyph_id, GGO_GLYPH_INDEX | GGO_NATIVE | GGO_UNHINTED, &metrics, 0, NULL, &identity);
double scale=1.0/daddy->fontSize;
n_g.h_advance=metrics.gmCellIncX*scale;
n_g.v_advance=otm.otmTextMetrics.tmHeight*scale;
n_g.h_width=metrics.gmBlackBoxX*scale;
n_g.v_width=metrics.gmBlackBoxY*scale;
if ( bufferSize == GDI_ERROR) {
// shit happened
} else if ( bufferSize == 0) {
// character has no visual representation, but is valid (eg whitespace)
doAdd=true;
} else {
char *buffer = new char[bufferSize];
if ( GetGlyphOutline (daddy->hScreenDC, glyph_id, GGO_GLYPH_INDEX | GGO_NATIVE | GGO_UNHINTED, &metrics, bufferSize, buffer, &identity) <= 0 ) {
// shit happened
} else {
// Platform SDK is rubbish, read KB87115 instead
DWORD polyOffset=0;
while ( polyOffset < bufferSize ) {
TTPOLYGONHEADER const *polyHeader=(TTPOLYGONHEADER const *)(buffer+polyOffset);
if (polyOffset+polyHeader->cb > bufferSize) break;
if (polyHeader->dwType == TT_POLYGON_TYPE) {
path_builder.moveTo(pointfx_to_nrpoint(polyHeader->pfxStart, scale));
DWORD curveOffset=polyOffset+sizeof(TTPOLYGONHEADER);
while ( curveOffset < polyOffset+polyHeader->cb ) {
TTPOLYCURVE const *polyCurve=(TTPOLYCURVE const *)(buffer+curveOffset);
POINTFX const *p=polyCurve->apfx;
POINTFX const *endp=p+polyCurve->cpfx;
switch (polyCurve->wType) {
case TT_PRIM_LINE:
while ( p != endp )
path_builder.lineTo(pointfx_to_nrpoint(*p++, scale));
break;
case TT_PRIM_QSPLINE:
{
g_assert(polyCurve->cpfx >= 2);
// The list of points specifies one or more control points and ends with the end point.
// The intermediate points (on the curve) are the points between the control points.
Geom::Point this_control = pointfx_to_nrpoint(*p++, scale);
while ( p+1 != endp ) { // Process all "midpoints" (all points except the last)
Geom::Point new_control = pointfx_to_nrpoint(*p++, scale);
path_builder.quadTo(this_control, (new_control+this_control)/2);
this_control = new_control;
}
Geom::Point end = pointfx_to_nrpoint(*p++, scale);
path_builder.quadTo(this_control, end);
}
break;
case 3: // TT_PRIM_CSPLINE
g_assert(polyCurve->cpfx % 3 == 0);
while ( p != endp ) {
path_builder.curveTo(pointfx_to_nrpoint(p[0], scale),
pointfx_to_nrpoint(p[1], scale),
pointfx_to_nrpoint(p[2], scale));
p += 3;
}
break;
}
curveOffset += sizeof(TTPOLYCURVE)+sizeof(POINTFX)*(polyCurve->cpfx-1);
}
}
polyOffset += polyHeader->cb;
}
doAdd=true;
}
delete [] buffer;
}
#else
if (FT_Load_Glyph (theFace, glyph_id, FT_LOAD_NO_SCALE | FT_LOAD_NO_HINTING | FT_LOAD_NO_BITMAP)) {
// shit happened
} else {
if ( FT_HAS_HORIZONTAL(theFace) ) {
n_g.h_advance=((double)theFace->glyph->metrics.horiAdvance)/((double)theFace->units_per_EM);
n_g.h_width=((double)theFace->glyph->metrics.width)/((double)theFace->units_per_EM);
} else {
n_g.h_width=n_g.h_advance=((double)(theFace->bbox.xMax-theFace->bbox.xMin))/((double)theFace->units_per_EM);
}
if ( FT_HAS_VERTICAL(theFace) ) {
n_g.v_advance=((double)theFace->glyph->metrics.vertAdvance)/((double)theFace->units_per_EM);
n_g.v_width=((double)theFace->glyph->metrics.height)/((double)theFace->units_per_EM);
} else {
n_g.v_width=n_g.v_advance=((double)theFace->height)/((double)theFace->units_per_EM);
}
if ( theFace->glyph->format == ft_glyph_format_outline ) {
FT_Outline_Funcs ft2_outline_funcs = {
ft2_move_to,
ft2_line_to,
ft2_conic_to,
ft2_cubic_to,
0, 0
};
FT2GeomData user(path_builder, 1.0/((double)theFace->units_per_EM));
FT_Outline_Decompose (&theFace->glyph->outline, &ft2_outline_funcs, &user);
}
doAdd=true;
}
#endif
path_builder.finish();
if ( doAdd ) {
Geom::PathVector pv = path_builder.peek();
// close all paths
for (Geom::PathVector::iterator i = pv.begin(); i != pv.end(); ++i) {
i->close();
}
if ( !pv.empty() ) {
n_g.pathvector = new Geom::PathVector(pv);
Geom::OptRect bounds = bounds_exact(*n_g.pathvector);
if (bounds) {
n_g.bbox[0] = bounds->left();
n_g.bbox[1] = bounds->top();
n_g.bbox[2] = bounds->right();
n_g.bbox[3] = bounds->bottom();
}
}
glyphs[nbGlyph]=n_g;
id_to_no[glyph_id]=nbGlyph;
nbGlyph++;
}
} else {
}
}
void
LPESimplify::generateHelperPathAndSmooth(Geom::PathVector &result)
{
if(steps < 1) {
return;
}
Geom::PathVector tmp_path;
Geom::CubicBezier const *cubic = NULL;
for (Geom::PathVector::iterator path_it = result.begin(); path_it != result.end(); ++path_it) {
if (path_it->empty()) {
continue;
}
Geom::Path::iterator curve_it1 = path_it->begin(); // incoming curve
Geom::Path::iterator curve_it2 = ++(path_it->begin());// outgoing curve
Geom::Path::iterator curve_endit = path_it->end_default(); // this determines when the loop has to stop
SPCurve *nCurve = new SPCurve();
if (path_it->closed()) {
// if the path is closed, maybe we have to stop a bit earlier because the
// closing line segment has zerolength.
const Geom::Curve &closingline =
path_it->back_closed(); // the closing line segment is always of type
// Geom::LineSegment.
if (are_near(closingline.initialPoint(), closingline.finalPoint())) {
// closingline.isDegenerate() did not work, because it only checks for
// *exact* zero length, which goes wrong for relative coordinates and
// rounding errors...
// the closing line segment has zero-length. So stop before that one!
curve_endit = path_it->end_open();
}
}
if(helper_size > 0) {
drawNode(curve_it1->initialPoint());
}
nCurve->moveto(curve_it1->initialPoint());
Geom::Point start = Geom::Point(0,0);
while (curve_it1 != curve_endit) {
cubic = dynamic_cast<Geom::CubicBezier const *>(&*curve_it1);
Geom::Point point_at1 = curve_it1->initialPoint();
Geom::Point point_at2 = curve_it1->finalPoint();
Geom::Point point_at3 = curve_it1->finalPoint();
Geom::Point point_at4 = curve_it1->finalPoint();
if(start == Geom::Point(0,0)) {
start = point_at1;
}
if (cubic) {
point_at1 = (*cubic)[1];
point_at2 = (*cubic)[2];
}
if(path_it->closed() && curve_it2 == curve_endit) {
point_at4 = start;
}
if(curve_it2 != curve_endit) {
cubic = dynamic_cast<Geom::CubicBezier const *>(&*curve_it2);
if (cubic) {
point_at4 = (*cubic)[1];
}
}
Geom::Ray ray1(point_at2, point_at3);
Geom::Ray ray2(point_at3, point_at4);
double angle1 = Geom::deg_from_rad(ray1.angle());
double angle2 = Geom::deg_from_rad(ray2.angle());
if((smooth_angles >= std::abs(angle2 - angle1)) && !are_near(point_at4,point_at3) && !are_near(point_at2,point_at3)) {
double dist = Geom::distance(point_at2,point_at3);
Geom::Angle angleFixed = ray2.angle();
angleFixed -= Geom::Angle::from_degrees(180.0);
point_at2 = Geom::Point::polar(angleFixed, dist) + point_at3;
}
nCurve->curveto(point_at1, point_at2, curve_it1->finalPoint());
cubic = dynamic_cast<Geom::CubicBezier const *>(nCurve->last_segment());
if (cubic) {
point_at1 = (*cubic)[1];
point_at2 = (*cubic)[2];
if(helper_size > 0) {
if(!are_near((*cubic)[0],(*cubic)[1])) {
drawHandle((*cubic)[1]);
drawHandleLine((*cubic)[0],(*cubic)[1]);
}
if(!are_near((*cubic)[3],(*cubic)[2])) {
drawHandle((*cubic)[2]);
drawHandleLine((*cubic)[3],(*cubic)[2]);
}
}
}
if(helper_size > 0) {
drawNode(curve_it1->finalPoint());
}
++curve_it1;
++curve_it2;
}
if (path_it->closed()) {
nCurve->closepath_current();
}
tmp_path.push_back(nCurve->get_pathvector()[0]);
nCurve->reset();
delete nCurve;
}
result = tmp_path;
}
