コード例 #1
0
ファイル: DINO.cpp プロジェクト: blucia0a/dino
bool DINOGlobal::shouldIgnoreFunction (const llvm::Function &F) {
    if (F.getName().find(DINOPrefix) == 0) {

#ifdef DINO_VERBOSE
        llvm::outs() << "Skipping DINO function " << F.getName() << "\n";
#endif //DINO_VERBOSE

        return true;
    }
    return false;
}
コード例 #2
0
ファイル: IndependentBlocks.cpp プロジェクト: larryv/polly
bool IndependentBlocks::runOnFunction(llvm::Function &F) {

  bool Changed = false;

  RI = &getAnalysis<RegionInfoPass>().getRegionInfo();
  LI = &getAnalysis<LoopInfoWrapperPass>().getLoopInfo();
  SD = &getAnalysis<ScopDetection>();
  SE = &getAnalysis<ScalarEvolution>();

  AllocaBlock = &F.getEntryBlock();

  DEBUG(dbgs() << "Run IndepBlock on " << F.getName() << '\n');

  for (const Region *R : *SD) {
    Changed |= createIndependentBlocks(R);
    Changed |= eliminateDeadCode(R);
    // This may change the RegionTree.
    if (!DisableIntraScopScalarToArray || !PollyModelPHINodes)
      Changed |= splitExitBlock(const_cast<Region *>(R));
  }

  DEBUG(dbgs() << "Before Scalar to Array------->\n");
  DEBUG(F.dump());

  if (!DisableIntraScopScalarToArray || !PollyModelPHINodes)
    for (const Region *R : *SD)
      Changed |= translateScalarToArray(R);

  DEBUG(dbgs() << "After Independent Blocks------------->\n");
  DEBUG(F.dump());

  verifyAnalysis();

  return Changed;
}
コード例 #3
0
ファイル: inliner.cpp プロジェクト: guangwong/pyston
    bool _runOnFunction(llvm::Function& f) {
        Timer _t2("(sum)");
        Timer _t("initializing");
        initialize();
        _t.split("overhead");

        // f.dump();

        llvm::Module* cur_module = f.getParent();

#if LLVMREV < 217548
        llvm::PassManager fake_pm;
#else
        llvm::legacy::PassManager fake_pm;
#endif
        llvm::InlineCostAnalysis* cost_analysis = new llvm::InlineCostAnalysis();
        fake_pm.add(cost_analysis);
        // llvm::errs() << "doing fake run\n";
        fake_pm.run(*fake_module);
        // llvm::errs() << "done with fake run\n";

        bool did_any_inlining = false;

        // TODO I haven't gotten the callgraph-updating part of the inliner to work,
        // so it's not easy to tell what callsites have been inlined into (ie added to)
        // the function.
        // One simple-but-not-great way to handle it is to just iterate over the entire function
        // multiple times and re-inline things until we don't want to inline any more;
        // NPASSES controls the maximum number of times to attempt that.
        // Right now we actually don't need that, since we only inline fully-optimized
        // functions (from the stdlib), and those will already have had inlining
        // applied recursively.
        const int NPASSES = 1;
        for (int passnum = 0; passnum < NPASSES; passnum++) {
            _t.split("collecting calls");

            std::vector<llvm::CallSite> calls;
            for (llvm::inst_iterator I = llvm::inst_begin(f), E = llvm::inst_end(f); I != E; ++I) {
                llvm::CallInst* call = llvm::dyn_cast<llvm::CallInst>(&(*I));
                // From Inliner.cpp:
                if (!call || llvm::isa<llvm::IntrinsicInst>(call))
                    continue;
                // I->dump();
                llvm::CallSite CS(call);

                llvm::Value* v = CS.getCalledValue();
                llvm::ConstantExpr* ce = llvm::dyn_cast<llvm::ConstantExpr>(v);
                if (!ce)
                    continue;

                assert(ce->isCast());
                llvm::ConstantInt* l_addr = llvm::cast<llvm::ConstantInt>(ce->getOperand(0));
                int64_t addr = l_addr->getSExtValue();

                if (addr == (int64_t)printf)
                    continue;
                llvm::Function* f = g.func_addr_registry.getLLVMFuncAtAddress((void*)addr);
                if (f == NULL) {
                    if (VERBOSITY()) {
                        printf("Giving up on inlining %s:\n",
                               g.func_addr_registry.getFuncNameAtAddress((void*)addr, true).c_str());
                        call->dump();
                    }
                    continue;
                }

                // We load the bitcode lazily, so check if we haven't yet fully loaded the function:
                if (f->isMaterializable()) {
#if LLVMREV < 220600
                    f->Materialize();
#else
                    f->materialize();
#endif
                }

                // It could still be a declaration, though I think the code won't generate this case any more:
                if (f->isDeclaration())
                    continue;

                // Keep this section as a release_assert since the code-to-be-inlined, as well as the inlining
                // decisions, can be different in release mode:
                int op_idx = -1;
                for (llvm::Argument& arg : f->args()) {
                    ++op_idx;
                    llvm::Type* op_type = call->getOperand(op_idx)->getType();
                    if (arg.getType() != op_type) {
                        llvm::errs() << f->getName() << " has arg " << op_idx << " mismatched!\n";
                        llvm::errs() << "Given ";
                        op_type->dump();
                        llvm::errs() << " but underlying function expected ";
                        arg.getType()->dump();
                        llvm::errs() << '\n';
                    }
                    RELEASE_ASSERT(arg.getType() == call->getOperand(op_idx)->getType(), "");
                }

                assert(!f->isDeclaration());
                CS.setCalledFunction(f);
                calls.push_back(CS);
            }

            // assert(0 && "TODO");
            // printf("%ld\n", calls.size());

            bool did_inline = false;
            _t.split("doing inlining");
            while (calls.size()) {
                llvm::CallSite cs = calls.back();
                calls.pop_back();

                // if (VERBOSITY("irgen.inlining") >= 1) {
                // llvm::errs() << "Evaluating callsite ";
                // cs->dump();
                //}
                llvm::InlineCost IC = cost_analysis->getInlineCost(cs, threshold);
                bool do_inline = false;
                if (IC.isAlways()) {
                    if (VERBOSITY("irgen.inlining") >= 2)
                        llvm::errs() << "always inline\n";
                    do_inline = true;
                } else if (IC.isNever()) {
                    if (VERBOSITY("irgen.inlining") >= 2)
                        llvm::errs() << "never inline\n";
                    do_inline = false;
                } else {
                    if (VERBOSITY("irgen.inlining") >= 2)
                        llvm::errs() << "Inline cost: " << IC.getCost() << '\n';
                    do_inline = (bool)IC;
                }

                if (VERBOSITY("irgen.inlining") >= 1) {
                    if (!do_inline)
                        llvm::outs() << "not ";
                    llvm::outs() << "inlining ";
                    cs->dump();
                }

                if (do_inline) {
                    static StatCounter num_inlines("num_inlines");
                    num_inlines.log();

                    // llvm::CallGraph cg(*f.getParent());
                    ////cg.addToCallGraph(cs->getCalledFunction());
                    // llvm::InlineFunctionInfo InlineInfo(&cg);

                    llvm::InlineFunctionInfo InlineInfo;
                    bool inlined = llvm::InlineFunction(cs, InlineInfo, false);
                    did_inline = did_inline || inlined;
                    did_any_inlining = did_any_inlining || inlined;

                    // if (inlined)
                    // f.dump();
                }
            }

            if (!did_inline) {
                if (passnum >= NPASSES - 1 && VERBOSITY("irgen.inlining"))
                    printf("quitting after %d passes\n", passnum + 1);
                break;
            }
        }

        // TODO would be nice to break out here and not have to rematerialize the function;
        // I think I have to do that even if no inlining happened from the "setCalledFunction" call above.
        // I thought that'd just change the CS object, but maybe it changes the underlying instruction as well?
        // if (!did_any_inlining)
        // return false;

        _t.split("remapping");

        llvm::ValueToValueMapTy VMap;
        for (llvm::Function::iterator I = f.begin(), E = f.end(); I != E; ++I) {
            VMap[I] = I;
        }
        MyMaterializer materializer(cur_module);
        for (llvm::inst_iterator I = llvm::inst_begin(f), E = llvm::inst_end(f); I != E; ++I) {
            RemapInstruction(&(*I), VMap, llvm::RF_None, NULL, &materializer);
        }

        _t.split("cleaning up");

        std::vector<llvm::GlobalValue*> to_remove;
        for (llvm::Module::global_iterator I = cur_module->global_begin(), E = cur_module->global_end(); I != E; ++I) {
            if (I->use_empty()) {
                to_remove.push_back(I);
                continue;
            }
        }

        for (int i = 0; i < to_remove.size(); i++) {
            to_remove[i]->eraseFromParent();
        }

        for (llvm::Module::iterator I = cur_module->begin(), E = cur_module->end(); I != E;) {
            if (!I->isDeclaration()) {
                ++I;
                continue;
            }

            if (I->use_empty()) {
                I = cur_module->getFunctionList().erase(I);
            } else {
                ++I;
            }
        }

        return did_any_inlining;
    }
コード例 #4
0
ファイル: jiteventlistener.cpp プロジェクト: Priyajag/qling
void JitEventListener::NotifyFunctionEmitted(const llvm::Function &f, void *, size_t, const llvm::JITEventListener::EmittedFunctionDetails &)
{
    if(f.getName().find("__cling_Un1Qu3")!=llvm::StringRef::npos)
        emit aboutToExecWrappedFunction();
}