コード例 #1
0
mitk::Surface::Pointer mitk::PlanarFigureSegmentationController::CreateSurfaceFromPlanarFigure( mitk::PlanarFigure::Pointer figure )
{
  if ( figure.IsNull() )
  {
    MITK_ERROR << "Given PlanarFigure is NULL. Please provide valid PlanarFigure.";
    return NULL;
  }

  mitk::Surface::Pointer newSurface = mitk::Surface::New();

  vtkSmartPointer<vtkPoints> points = vtkSmartPointer<vtkPoints>::New();
  vtkSmartPointer<vtkPolygon> polygon = vtkSmartPointer<vtkPolygon>::New();
  vtkSmartPointer<vtkCellArray> cells = vtkSmartPointer<vtkCellArray>::New();
  vtkSmartPointer<vtkPolyData> polyData = vtkSmartPointer<vtkPolyData>::New();

  const mitk::Geometry2D* figureGeometry = figure->GetGeometry2D();

  // Get the polyline
  mitk::PlanarFigure::PolyLineType planarPolyLine = figure->GetPolyLine(0);
  mitk::PlanarFigure::PolyLineType::iterator iter;

  // iterate over the polyline, ...
  int pointCounter = 0;
  for( iter = planarPolyLine.begin(); iter != planarPolyLine.end(); iter++ )
  {
    // ... determine the world-coordinates
    mitk::Point2D polyLinePoint = iter->Point;
    mitk::Point3D pointInWorldCoordiantes;
    figureGeometry->Map( polyLinePoint, pointInWorldCoordiantes );

    // and add them as new points to the vtkPoints
    points->InsertNextPoint( pointInWorldCoordiantes[0], pointInWorldCoordiantes[1], pointInWorldCoordiantes[2] );
    ++pointCounter;
  }

  // create a polygon with the points of the polyline
  polygon->GetPointIds()->SetNumberOfIds( pointCounter );
  for(int i = 0; i < pointCounter; i++)
  {
    polygon->GetPointIds()->SetId(i,i);
  }

  // initialize the vtkCellArray and vtkPolyData
  cells->InsertNextCell(polygon);
  polyData->SetPoints(points);
  polyData->SetPolys( cells );

  // set the polydata to the surface
  newSurface->SetVtkPolyData( polyData );

  return newSurface;
}
コード例 #2
0
void QmitkImageStatisticsCalculationThread::Initialize( mitk::Image::Pointer image, mitk::Image::Pointer binaryImage, mitk::PlanarFigure::Pointer planarFig )
{
  // reset old values
  if( this->m_StatisticsImage.IsNotNull() )
    this->m_StatisticsImage = 0;

  if( this->m_BinaryMask.IsNotNull() )
    this->m_BinaryMask = 0;

  if( this->m_PlanarFigureMask.IsNotNull())
    this->m_PlanarFigureMask = 0;

  // set new values if passed in
  if(image.IsNotNull())
    this->m_StatisticsImage = image->Clone();
  if(binaryImage.IsNotNull())
    this->m_BinaryMask = binaryImage->Clone();
  if(planarFig.IsNotNull())
    this->m_PlanarFigureMask = planarFig->Clone();
}
コード例 #3
0
void QmitkImageStatisticsCalculationThread::Initialize( mitk::Image::Pointer image, mitk::Image::Pointer binaryImage, mitk::PlanarFigure::Pointer planarFig )
{
  // reset old values
  if( this->m_StatisticsImage.IsNotNull() )
    this->m_StatisticsImage = 0;

  if( this->m_BinaryMask.IsNotNull() )
    this->m_BinaryMask = 0;

  if( this->m_PlanarFigureMask.IsNotNull())
    this->m_PlanarFigureMask = 0;

  // set new values if passed in
  if(image.IsNotNull())
    this->m_StatisticsImage = image->Clone();
  if(binaryImage.IsNotNull())
    this->m_BinaryMask = binaryImage->Clone();
  if(planarFig.IsNotNull())
    this->m_PlanarFigureMask = dynamic_cast<mitk::PlanarFigure*>(planarFig.GetPointer()); // once clone methods for planar figures are implemented, copy the data here!
}
コード例 #4
0
  void RunTest(mitk::PlanarFigure::Pointer figure, std::string interactionXmlPath, std::string referenceFigurePath)
  {
    mitk::DataNode::Pointer node;
    mitk::PlanarFigureInteractor::Pointer figureInteractor;

    //Create DataNode as a container for our PlanarFigure
    node = mitk::DataNode::New();
    node->SetData(figure);

    mitk::InteractionTestHelper interactionTestHelper(GetTestDataFilePath(interactionXmlPath));


    //Load a bounding image
    mitk::Image::Pointer testImage = mitk::IOUtil::LoadImage(GetTestDataFilePath("Pic3D.nrrd"));
    figure->SetGeometry(testImage->GetGeometry());

    mitk::DataNode::Pointer dn = mitk::DataNode::New();
    dn->SetData(testImage);
    interactionTestHelper.AddNodeToStorage(dn);
    interactionTestHelper.GetDataStorage()->Add(node, dn);


    node->SetName("PLANAR FIGURE");
    // set as selected
    node->SetSelected(true);
    node->AddProperty("selected", mitk::BoolProperty::New(true));

    //Load state machine
    figureInteractor = mitk::PlanarFigureInteractor::New();
    us::Module* planarFigureModule = us::ModuleRegistry::GetModule("MitkPlanarFigure");
    figureInteractor->LoadStateMachine("PlanarFigureInteraction.xml", planarFigureModule );
    figureInteractor->SetEventConfig( "PlanarFigureConfig.xml", planarFigureModule );
    figureInteractor->SetDataNode( node );


    //Start Interaction
    interactionTestHelper.PlaybackInteraction();

    //Load reference PlanarFigure
    mitk::PlanarFigureReader::Pointer reader = mitk::PlanarFigureReader::New();
    reader->SetFileName(GetTestDataFilePath(referenceFigurePath));
    reader->Update();
    mitk::PlanarFigure::Pointer reference = reader->GetOutput(0);

    //Compare figures
    MITK_ASSERT_EQUAL(figure, reference, "Compare figure with reference");
  }
コード例 #5
0
void mitk::PlanarFigureSegmentationController::AddPlanarFigure( mitk::PlanarFigure::Pointer planarFigure )
{
  if ( planarFigure.IsNull() )
    return;

  bool newFigure = true;
  std::size_t indexOfFigure = 0;
  for( std::size_t i=0; i<m_PlanarFigureList.size(); i++ )
  {
    if( m_PlanarFigureList.at(i) == planarFigure )
    {
      indexOfFigure = i;
      newFigure = false;
      break;
    }
  }

  mitk::Surface::Pointer figureAsSurface = NULL;

  if ( newFigure )
  {
    m_PlanarFigureList.push_back( planarFigure );
    figureAsSurface = this->CreateSurfaceFromPlanarFigure( planarFigure );
    m_SurfaceList.push_back( figureAsSurface );
    if (!m_PlanarFigureList.empty())
    {
      indexOfFigure = m_PlanarFigureList.size() -1 ;
    }
  }
  else
  {
    figureAsSurface = this->CreateSurfaceFromPlanarFigure( planarFigure );
    m_SurfaceList.at(indexOfFigure) = figureAsSurface;
  }

  if ( m_ReduceFilter.IsNull() )
  {
    InitializeFilters();
  }

  m_ReduceFilter->SetInput( indexOfFigure, figureAsSurface );

  m_NormalsFilter->SetInput( indexOfFigure, m_ReduceFilter->GetOutput( indexOfFigure ) );
  m_DistanceImageCreator->SetInput( indexOfFigure, m_NormalsFilter->GetOutput( indexOfFigure ) );
}
コード例 #6
0
void mitk::PlanarFigureSegmentationController::RemovePlanarFigure( mitk::PlanarFigure::Pointer planarFigure )
{
  if ( planarFigure.IsNull() )
    return;

  bool figureFound = false;
  std::size_t indexOfFigure = 0;
  for( std::size_t i=0; i<m_PlanarFigureList.size(); i++ )
  {
    if( m_PlanarFigureList.at(i) == planarFigure )
    {
      indexOfFigure = i;
      figureFound = true;
      break;
    }
  }

  if ( !figureFound )
    return;

  // TODO: fix this! The following code had to be removed as the method
  // RemoveInputs() has been removed in ITK 4
  // The remaining code works correctly but is slower
  if ( false && indexOfFigure == m_PlanarFigureList.size()-1 )
  {
    // Ff the removed figure was the last one in the list, we can simply
    // remove the last input from each filter.
//     m_DistanceImageCreator->RemoveInputs( m_NormalsFilter->GetOutput( indexOfFigure ) );
//     m_NormalsFilter->RemoveInput( m_ReduceFilter->GetOutput( indexOfFigure ) );
//     m_ReduceFilter->RemoveInput( const_cast<mitk::Surface*>(m_ReduceFilter->GetInput(indexOfFigure)) );
  }
  else
  {
    // this is not very nice! If the figure that has been removed is NOT the last
    // one in the list we have to create new filters and add all remaining
    // inputs again.
    //
    // Has to be done as the filters do not work when removing an input
    // other than the last one.

    // create new filters
    InitializeFilters();

    // and add all existing surfaces
    SurfaceListType::iterator surfaceIter = m_SurfaceList.begin();
    for ( surfaceIter = m_SurfaceList.begin(); surfaceIter!=m_SurfaceList.end(); surfaceIter++ )
    {
      m_ReduceFilter->SetInput( indexOfFigure, (*surfaceIter) );
      m_NormalsFilter->SetInput( indexOfFigure, m_ReduceFilter->GetOutput( indexOfFigure ) );
      m_DistanceImageCreator->SetInput( indexOfFigure, m_NormalsFilter->GetOutput( indexOfFigure ) );
    }
  }

  PlanarFigureListType::iterator whereIter = m_PlanarFigureList.begin();
  whereIter += indexOfFigure;
  m_PlanarFigureList.erase( whereIter );

  SurfaceListType::iterator surfaceIter = m_SurfaceList.begin();
  surfaceIter += indexOfFigure;
  m_SurfaceList.erase( surfaceIter );
}
コード例 #7
0
static mitk::PlanarFigure::Pointer Clone(mitk::PlanarFigure::Pointer original)
{
  return original->Clone();
}
コード例 #8
0
  void GetImageStatisticsNoRules() {
    auto statisticsNode = mitk::CreateImageStatisticsNode(m_statisticsContainer, "testStatistics");
    auto standaloneDataStorage = mitk::StandaloneDataStorage::New();
    standaloneDataStorage->Add(statisticsNode);

    //no rules + 1 image --> test return nullptr
    mitk::ImageStatisticsContainer::ConstPointer emptyStatistic;
    CPPUNIT_ASSERT_NO_THROW(emptyStatistic = mitk::ImageStatisticsContainerManager::GetImageStatistics(standaloneDataStorage.GetPointer(), m_image.GetPointer()));
    CPPUNIT_ASSERT_EQUAL(emptyStatistic.IsNull(), true);

    //no rules + 1 image + 1 mask --> test return nullptr
    CPPUNIT_ASSERT_NO_THROW(emptyStatistic = mitk::ImageStatisticsContainerManager::GetImageStatistics(standaloneDataStorage.GetPointer(), m_image.GetPointer(), m_mask.GetPointer()));
    CPPUNIT_ASSERT_EQUAL(emptyStatistic.IsNull(), true);

    //no rules + 1 image + 1 planarFigure --> test return nullptr
    CPPUNIT_ASSERT_NO_THROW(emptyStatistic = mitk::ImageStatisticsContainerManager::GetImageStatistics(standaloneDataStorage.GetPointer(), m_image.GetPointer(), m_planarFigure.GetPointer()));
    CPPUNIT_ASSERT_EQUAL(emptyStatistic.IsNull(), true);
  }
コード例 #9
0
  void GetImageStatisticsInvalid()
  {
    CreateNodeRelationImage(m_statisticsContainer.GetPointer(), m_image.GetPointer());

    CPPUNIT_ASSERT_THROW(mitk::ImageStatisticsContainerManager::GetImageStatistics(nullptr, m_image.GetPointer()), mitk::Exception);

    auto standaloneDataStorage = mitk::StandaloneDataStorage::New();

    CPPUNIT_ASSERT_THROW(mitk::ImageStatisticsContainerManager::GetImageStatistics(standaloneDataStorage.GetPointer(), nullptr), mitk::Exception);
    CPPUNIT_ASSERT_THROW(mitk::ImageStatisticsContainerManager::GetImageStatistics(standaloneDataStorage.GetPointer(), nullptr, m_mask.GetPointer()), mitk::Exception);
    CPPUNIT_ASSERT_THROW(mitk::ImageStatisticsContainerManager::GetImageStatistics(standaloneDataStorage.GetPointer(), nullptr, m_planarFigure.GetPointer()), mitk::Exception);
  }
コード例 #10
0
  void GetImageStatisticsWithImageAndMaskNotConnected()
  {
    //create rules connection + add statistics to dataStorage
    auto statisticsNode = mitk::CreateImageStatisticsNode(m_statisticsContainer, "testStatistics");
    CreateNodeRelationImage(m_statisticsContainer.GetPointer(), m_image.GetPointer());
    CreateNodeRelationMask(m_statisticsContainer.GetPointer(), m_mask.GetPointer());
    auto standaloneDataStorage = mitk::StandaloneDataStorage::New();
    standaloneDataStorage->Add(statisticsNode);

    //rule: (image-->statistics, mask-->statistics), 1 connected image --> test return nullptr
    mitk::ImageStatisticsContainer::ConstPointer statisticsWithImage;
    CPPUNIT_ASSERT_NO_THROW(statisticsWithImage = mitk::ImageStatisticsContainerManager::GetImageStatistics(standaloneDataStorage.GetPointer(), m_image.GetPointer()));
    CPPUNIT_ASSERT_EQUAL(statisticsWithImage.IsNull(), true);

    //rule: (image-->statistics, mask-->statistics), 1 unconnected image, 1 unconnected mask --> test return nullptr
    mitk::ImageStatisticsContainer::ConstPointer statisticsWithImageNotConnectedAndMaskNotConnected;
    CPPUNIT_ASSERT_NO_THROW(statisticsWithImageNotConnectedAndMaskNotConnected = mitk::ImageStatisticsContainerManager::GetImageStatistics(standaloneDataStorage.GetPointer(), m_image2.GetPointer(), m_mask2.GetPointer()));
    CPPUNIT_ASSERT_EQUAL(statisticsWithImageNotConnectedAndMaskNotConnected.IsNull(), true);

    //rule: (image-->statistics, mask-->statistics), 1 unconnected image, 1 connected mask --> test return nullptr
    mitk::ImageStatisticsContainer::ConstPointer statisticsWithImageAndMaskNotConnected;
    CPPUNIT_ASSERT_NO_THROW(statisticsWithImageAndMaskNotConnected = mitk::ImageStatisticsContainerManager::GetImageStatistics(standaloneDataStorage.GetPointer(), m_image2.GetPointer(), m_mask.GetPointer()));
    CPPUNIT_ASSERT_EQUAL(statisticsWithImageAndMaskNotConnected.IsNull(), true);

    //rule: (image-->statistics, mask-->statistics), 1 connected image, 1 unconnected planarFigure --> test return nullptr
    mitk::ImageStatisticsContainer::ConstPointer statisticsWithImageAndPlanarFigureNotConnected;
    CPPUNIT_ASSERT_NO_THROW(statisticsWithImageAndPlanarFigureNotConnected = mitk::ImageStatisticsContainerManager::GetImageStatistics(standaloneDataStorage.GetPointer(), m_image.GetPointer(), m_planarFigure.GetPointer()));
    CPPUNIT_ASSERT_EQUAL(statisticsWithImageAndPlanarFigureNotConnected.IsNull(), true);

    //rule: (image-->statistics, mask-->statistics), 1 unconnected image, 1 unconnected planarFigure --> test return nullptr
    mitk::ImageStatisticsContainer::ConstPointer statisticsWithImageNotConnectedAndPlanarFigureNotConnected;
    CPPUNIT_ASSERT_NO_THROW(statisticsWithImageAndPlanarFigureNotConnected = mitk::ImageStatisticsContainerManager::GetImageStatistics(standaloneDataStorage.GetPointer(), m_image2.GetPointer(), m_planarFigure.GetPointer()));
    CPPUNIT_ASSERT_EQUAL(statisticsWithImageAndPlanarFigureNotConnected.IsNull(), true);
  }