コード例 #1
0
ファイル: StandardShadowMap.cpp プロジェクト: 4ker/osg
void StandardShadowMap::ViewData::aimShadowCastingCamera(
                                        const osg::BoundingSphere &bs,
                                        const osg::Light *light,
                                        const osg::Vec4 &lightPos,
                                        const osg::Vec3 &lightDir,
                                        const osg::Vec3 &lightUpVector
                                        /* by default = osg::Vec3( 0, 1 0 )*/ )
{
    osg::Matrixd & view = _camera->getViewMatrix();
    osg::Matrixd & projection = _camera->getProjectionMatrix();

    osg::Vec3 up = lightUpVector;
    if( up.length2() <= 0 )  up.set( 0,1,0 );

    osg::Vec3d position(lightPos.x(), lightPos.y(), lightPos.z());
    if (lightPos[3]==0.0)   // infinite directional light
    {
        // make an orthographic projection
        // set the position far away along the light direction
        position = bs.center() - lightDir * bs.radius() * 2;
    }

    float centerDistance = (position-bs.center()).length();
    float znear = centerDistance-bs.radius();
    float zfar  = centerDistance+bs.radius();
    float zNearRatio = 0.001f;
    if (znear<zfar*zNearRatio)
        znear = zfar*zNearRatio;

    if ( lightPos[3]!=0.0 ) {  // positional light
        if( light->getSpotCutoff() < 180.0f) // also needs znear zfar estimates
        {
            float spotAngle = light->getSpotCutoff();
            projection.makePerspective( spotAngle * 2, 1.0, znear, zfar);
            view.makeLookAt(position,position+lightDir,up);
        } else { // standard omnidirectional positional light
            float top   = (bs.radius()/centerDistance)*znear;
            float right = top;

            projection.makeFrustum(-right,right,-top,top,znear,zfar);
            view.makeLookAt(position,bs.center(),up );
        }
    }
    else    // directional light
    {
            float top   = bs.radius();
            float right = top;
            projection.makeOrtho(-right, right, -top, top, znear, zfar);
            view.makeLookAt(position,bs.center(),up);
    }
}
コード例 #2
0
ファイル: CovisePlugin.cpp プロジェクト: nixz/covise
void CovisePlugin::expandBoundingSphere(osg::BoundingSphere &bsphere)
{
    if (coVRMSController::instance()->isCluster() && coVRDistributionManager::instance().isActive())
    {
        struct BSphere
        {
            double x, y, z, radius;
        };
        BSphere b_sphere;
        b_sphere.x = bsphere.center()[0];
        b_sphere.y = bsphere.center()[1];
        b_sphere.z = bsphere.center()[2];
        b_sphere.radius = bsphere.radius();

        if (coVRMSController::instance()->isMaster())
        {
            coVRMSController::SlaveData result(sizeof(b_sphere));

            if (coVRMSController::instance()->readSlaves(&result) < 0)
            {
                std::cerr << "VRSceneGraph::getBoundingSphere err: sync error";
                return;
            }

            BSphere bs;
            for (std::vector<void *>::iterator i = result.data.begin();
                 i != result.data.end(); ++i)
            {
                memcpy(&bs, *i, sizeof(bs));
                osg::BoundingSphere otherBs = osg::BoundingSphere(osg::Vec3(bs.x, bs.y, bs.z), bs.radius);
                bsphere.expandBy(otherBs);
            }

            b_sphere.x = bsphere.center()[0];
            b_sphere.y = bsphere.center()[1];
            b_sphere.z = bsphere.center()[2];
            b_sphere.radius = bsphere.radius();

            coVRMSController::instance()->sendSlaves(&b_sphere, sizeof(b_sphere));
        }
        else
        {
            coVRMSController::instance()->sendMaster(&b_sphere, sizeof(b_sphere));
            coVRMSController::instance()->readMaster(&b_sphere, sizeof(b_sphere));
            bsphere = osg::BoundingSphere(osg::Vec3(b_sphere.x, b_sphere.y, b_sphere.z), b_sphere.radius);
        }
    }
}
コード例 #3
0
bool DXFWriterNodeVisitor::writeHeader(const osg::BoundingSphere &bound)
{
    if ( _layers.empty() ) {
        return false;
    }
    _fout << "999\n written by OpenSceneGraph" << std::endl;

    _fout << "0\nSECTION\n2\nHEADER\n";
    _fout << "9\n$ACADVER\n1\nAC1006\n"; // specify minimum autocad version AC1006=R10

    _fout << "9\n$EXTMIN\n10\n"<<bound.center().x()-bound.radius()<<"\n20\n"<<bound.center().y()-bound.radius()<<"\n30\n"<<bound.center().z()-bound.radius()<<"\n";
    _fout << "9\n$EXTMAX\n10\n"<<bound.center().x()+bound.radius()<<"\n20\n"<<bound.center().y()+bound.radius()<<"\n30\n"<<bound.center().z()+bound.radius()<<"\n";

    _fout << "0\nENDSEC\n0\nSECTION\n2\nTABLES\n";
    _fout << "0\nTABLE\n2\nLAYER\n";

    for (std::vector<Layer>::iterator itr=_layers.begin();itr!=_layers.end();itr++) {
        if ( itr->_color ) {
            _fout<<"0\nLAYER\n2\n"<<itr->_name<<"\n70\n0\n62\n"<<itr->_color<<"\n6\nContinuous\n"; // color by layer
        } else {
            _fout<<"0\nLAYER\n2\n"<<itr->_name<<"\n70\n0\n62\n255\n6\nContinuous\n";  // most apps won't read 24bit color without a color value in header
        }
    }

    _fout << "0\nENDTAB\n0\nENDSEC\n";

    _fout << "0\nSECTION\n2\nENTITIES\n";
    _firstPass=false;
    _count=0;

    return true;
}
コード例 #4
0
void OrbitCameraManipulator::zoomToBoundingSphere( const osg::BoundingSphere& bs, double ratio_w )
{
	osg::Vec3f bs_center( bs.center() );
	double bs_radius = bs.radius();
	if( bs_radius <= 0.0 )
	{
		bs_radius = 2.0;
		bs_center._v[2] = 0.5;
	}

	m_rotate_center.set( bs.center() );

	osg::Vec3d eye_lookat(m_eye - m_lookat);
	eye_lookat.normalize();

	// define animation path
	if( m_animation_data )
	{
		osg::Vec3d target_lookat( bs.center() );

		double d_eye = bs_radius/sin( osg::DegreesToRadians(m_fovy*0.5) );
		osg::Vec3d target_eye( target_lookat + eye_lookat*d_eye );

		m_animation_data->m_start_eye.set( m_eye );
		m_animation_data->m_start_lookat.set( m_lookat );
		m_animation_data->m_start_up.set( m_up );

		m_animation_data->m_target_eye.set( target_eye );
		m_animation_data->m_target_lookat.set( target_lookat );
		m_animation_data->m_target_up.set( m_up );

		m_animation_data->_animationTime = 0.6;
		m_animation_data->start( -1 );
	}
}
コード例 #5
0
ファイル: osglight.cpp プロジェクト: 3dcl/osg
 ModelTransformCallback(const osg::BoundingSphere& bs)
 {
     _firstTime = 0.0;
     _period = 4.0f;
     _range = bs.radius()*0.5f;
 }
コード例 #6
0
ファイル: OsgMainApp.cpp プロジェクト: annerose/OsgSample
void OsgMainApp::loadModels(){

	//LOGI ("OsgMainApp::loadModels 1111");
    if(_vModelsToLoad.size()==0) return;
	//LOGI ("OsgMainApp::loadModels 22222");
    osg::notify(osg::ALWAYS)<<"There are "<<_vModelsToLoad.size()<<" models to load"<<std::endl;

	LOGI ("OsgMainApp::loadModels _vModelsToLoad.size() %d", _vModelsToLoad.size());
    Model newModel;
    for(unsigned int i=0; i<_vModelsToLoad.size(); i++){
        newModel = _vModelsToLoad[i];
        osg::notify(osg::ALWAYS)<<"Loading: "<<newModel.filename<<std::endl;

        osg::ref_ptr<osg::Node> loadedModel = osgDB::readNodeFile(newModel.filename);
        if (loadedModel == 0) {
            osg::notify(osg::ALWAYS)<<"Model not loaded"<<std::endl;
        } else {
            osg::notify(osg::ALWAYS)<<"Model loaded"<<std::endl;
            _vModels.push_back(newModel);

            loadedModel->setName(newModel.name);



          	osg::Uniform* samUniform = new osg::Uniform(osg::Uniform::SAMPLER_2D,
            			"sam");
            	samUniform->set(0);
           	loadedModel->getOrCreateStateSet()->addUniform(samUniform);

//
//        	osg::Uniform* pUnModelViewProjection = new osg::Uniform(osg::Uniform::FLOAT_MAT4, "gl_ModelViewProjectionMatrix");
//        	loadedModel->getOrCreateStateSet()->addUniform(pUnModelViewProjection);
//
//        	osg::Matrixf  mModelView;
//        	pUnModelViewProjection->get(mModelView);
//
//        	osg::Matrixf  mModelViewInverse;
//        	mModelViewInverse.invert(mModelView);
//
//          	osg::Uniform* pUnModelViewProjectionInverse = new osg::Uniform(osg::Uniform::FLOAT_MAT4, "uModelViewMatrixInverse");
//          	loadedModel->getOrCreateStateSet()->addUniform(pUnModelViewProjectionInverse);

           	long iFileLen = 0;
           	char* pszVertexShader = GetFileBuffer("/sdcard/osg/a.vs", iFileLen);
           	char* pszFragmentShader = GetFileBuffer("/sdcard/osg/a.fs", iFileLen);

            osg::Shader * vshader = new osg::Shader(osg::Shader::VERTEX, pszVertexShader );
            osg::Shader * fshader = new osg::Shader(osg::Shader::FRAGMENT, pszFragmentShader );

            osg::Program * prog = new osg::Program;
            prog->addShader ( vshader );
            prog->addShader ( fshader );

            loadedModel->getOrCreateStateSet()->setAttribute ( prog );

            delete [] pszVertexShader;
            delete [] pszFragmentShader;



//            osg::ref_ptr<osg::Image> image = osgDB::readImageFile("/sdcard/Present3D/sunset.bmp");
//
////        	osg::ref_ptr<osg::Image> image = new osg::Image;
////        	image->allocateImage(256, 256, 4, GL_RGBA, GL_UNSIGNED_BYTE);
////        	image->setInternalTextureFormat(GL_RGBA);
//
//            if (image.get())
//                {
//
////            	unsigned char * pData = image->data();
////            			memset(pData, 255, 256 * 256 * 4);
//
//                    osg::ref_ptr<osg::Texture2D> texture=new osg::Texture2D();
//                    texture->setDataVariance(osg::Object::DYNAMIC);
//                    texture->setImage(image.get());
//
//                    //设置自动生成纹理坐标
//                    osg::ref_ptr<osg::TexGen> texgen=new osg::TexGen();
//                    texgen->setMode(osg::TexGen::SPHERE_MAP);
//
//                    //设置纹理环境,模式为BLEND
//                    osg::ref_ptr<osg::TexEnv> texenv=new osg::TexEnv;
//                    texenv->setMode(osg::TexEnv::ADD);
//                    texenv->setColor(osg::Vec4(0.6,0.6,0.6,0.0));
//
//                    //启动单元一自动生成纹理坐标,并使用纹理
//                    osg::ref_ptr<osg::StateSet> state=new osg::StateSet;
//                    state->setTextureAttributeAndModes(1,texture.get(),osg::StateAttribute::ON);
//                    state->setTextureAttributeAndModes(1,texgen.get(),osg::StateAttribute::ON);
//                    state->setTextureAttribute(1,texenv.get());
//
//                    loadedModel->setStateSet(state.get());
//
//                    LOGE("osgDB::readImageFile ok");
//                }
//            else
//            {
//            	LOGE("osgDB::readImageFile err bmp 3");
//            }



//            osg::ref_ptr<osg::Node> theNode = createNode();

            _trans =new osg::MatrixTransform;
            _trans->setMatrix(osg::Matrix::rotate(0,1,0,0));
           _trans->addChild(loadedModel);
           // _trans->addChild(theNode);





            // 取模型的包围盒
            const osg::BoundingSphere bs = _trans->getBound();
            float radius = bs.radius();

            _xFactor = radius / 100;







           // _root->addChild(loadedModel);
	           _root->addChild(_trans);



        }
    }

    osgViewer::Viewer::Windows windows;
    _viewer->getWindows(windows);
    for(osgViewer::Viewer::Windows::iterator itr = windows.begin();itr != windows.end();++itr)
    {
      (*itr)->getState()->setUseModelViewAndProjectionUniforms(true);
      (*itr)->getState()->setUseVertexAttributeAliasing(true);
    }

    _viewer->setSceneData(NULL);
    _viewer->setSceneData(_root.get());
    _manipulator->getNode();
    _viewer->home();

    _viewer->getDatabasePager()->clear();
    _viewer->getDatabasePager()->registerPagedLODs(_root.get());
    _viewer->getDatabasePager()->setUpThreads(3, 1);
    _viewer->getDatabasePager()->setTargetMaximumNumberOfPageLOD(2);
    _viewer->getDatabasePager()->setUnrefImageDataAfterApplyPolicy(true, true);

    _vModelsToLoad.clear();

}