コード例 #1
0
static SoapySDR::Device *make_bladeRF(const SoapySDR::Kwargs &args)
{
    SoapySDR::Device *bladerf = new bladeRF_SoapySDR(kwargs_to_devinfo(args));

    //apply applicable settings found in args
    for (const auto &info : bladerf->getSettingInfo())
    {
        if (args.count(info.key) == 0) continue;
        bladerf->writeSetting(info.key, args.at(info.key));
    }

    return bladerf;
}
コード例 #2
0
ファイル: SDRDevices.cpp プロジェクト: junaidnaseer/CubicSDR
void SDRDevicesDialog::refreshDeviceProperties() {

    SDRDeviceInfo *selDev = getSelectedDevice(devTree->GetSelection());
    if (selDev && selDev->isAvailable()) {
        dev = selDev;
        selId = devTree->GetSelection();
        DeviceConfig *devConfig = wxGetApp().getConfig()->getDevice(dev->getName());
        m_propertyGrid->Clear();
        
        SoapySDR::Device *soapyDev = dev->getSoapyDevice();
        SoapySDR::ArgInfoList args = soapyDev->getSettingInfo();
        
        //A) General settings: name, offset, sample rate, agc, antennas (if > 1) 
        m_propertyGrid->Append(new wxPropertyCategory("General Settings"));
        
        devSettings.clear();

        //A-1) Name
        devSettings["name"] = m_propertyGrid->Append( new wxStringProperty("Name", wxPG_LABEL, devConfig->getDeviceName()) );
        //A-2) Offset
        devSettings["offset"] = m_propertyGrid->Append( new wxIntProperty("Offset (KHz)", wxPG_LABEL, devConfig->getOffset() / 1000) );
        
        //A-3) Antennas, is there are more than 1 RX antenna, else do not expose the setting.
        //get the saved setting
        const std::string& currentSetAntenna = devConfig->getAntennaName();

        //compare to the list of existing antennas
        SoapySDR::ArgInfo antennasArg;
        std::vector<std::string> antennaOpts = selDev->getAntennaNames(SOAPY_SDR_RX, 0);

        //only do something if there is more than 1 antenna
        if (antennaOpts.size() > 1) {

            //by default, choose the first of the list.
            std::string antennaToSelect = antennaOpts.front();

            auto found_i = std::find(antennaOpts.begin(), antennaOpts.end(), currentSetAntenna);

            if (found_i != antennaOpts.end()) {
                antennaToSelect = currentSetAntenna;
            }
            else {
                //erroneous antenna name, re-write device config with the first choice of teh list.
                devConfig->setAntennaName(antennaToSelect);
            }

            //build device settings
            for (std::string antenna : antennaOpts) {
                antennasArg.options.push_back(antenna);
                antennasArg.optionNames.push_back(antenna);
            }

            antennasArg.type = SoapySDR::ArgInfo::STRING;
            antennasArg.units = "";
            antennasArg.name = "Antenna";
            antennasArg.key = "antenna";
            antennasArg.value = antennaToSelect;

            devSettings["antenna"] = addArgInfoProperty(m_propertyGrid, antennasArg);
            deviceArgs["antenna"] = antennasArg;

        } //end if more than 1 antenna
        else {
            devConfig->setAntennaName("");
        }

        //A-4) Sample_rate:
        long currentSampleRate = wxGetApp().getSampleRate();
        long deviceSampleRate = devConfig->getSampleRate();
        
        if (!deviceSampleRate) {
            deviceSampleRate = selDev->getSampleRateNear(SOAPY_SDR_RX, 0, currentSampleRate);
        }
        
        SoapySDR::ArgInfo sampleRateArg;
        std::vector<long> rateOpts = selDev->getSampleRates(SOAPY_SDR_RX, 0);

        for (long rate : rateOpts) {
            sampleRateArg.options.push_back(std::to_string(rate));
            sampleRateArg.optionNames.push_back(frequencyToStr(rate));
        }
        
        sampleRateArg.type = SoapySDR::ArgInfo::STRING;
        sampleRateArg.units = "Hz";
        sampleRateArg.name = "Sample Rate";
        sampleRateArg.key = "sample_rate";
        sampleRateArg.value = std::to_string(deviceSampleRate);
        
        devSettings["sample_rate"] = addArgInfoProperty(m_propertyGrid, sampleRateArg);
        deviceArgs["sample_rate"] = sampleRateArg;

        

        //B) Runtime Settings:
        runtimeArgs.clear();
        runtimeProps.clear();
        streamProps.clear();
       
        if (args.size()) {
            m_propertyGrid->Append(new wxPropertyCategory("Run-time Settings"));
            
            for (SoapySDR::ArgInfoList::const_iterator args_i = args.begin(); args_i != args.end(); args_i++) {
                SoapySDR::ArgInfo arg = (*args_i);
				//We-reread the Device configuration, else we use the user settings.
				if (dev) {
					//Apply saved settings
					DeviceConfig *devConfig = wxGetApp().getConfig()->getDevice(dev->getDeviceId());
					arg.value = devConfig->getSetting(arg.key, soapyDev->readSetting(arg.key)); //use SoapyDevice data as fallback.
				}
				else {
					//re-read the SoapyDevice
					arg.value = soapyDev->readSetting(arg.key);
				}
               
                runtimeProps[arg.key] = addArgInfoProperty(m_propertyGrid, arg);
                runtimeArgs[arg.key] = arg;
            }
        }
        
        if (dev) {
            args = dev->getSoapyDevice()->getStreamArgsInfo(SOAPY_SDR_RX, 0);
            
            DeviceConfig *devConfig = wxGetApp().getConfig()->getDevice(dev->getDeviceId());
            ConfigSettings devStreamOpts = devConfig->getStreamOpts();
            if (devStreamOpts.size()) {
                for (int j = 0, jMax = args.size(); j < jMax; j++) {
                    if (devStreamOpts.find(args[j].key) != devStreamOpts.end()) {
                        args[j].value = devStreamOpts[args[j].key];
                    }
                }
            }
            
            if (args.size()) {
                m_propertyGrid->Append(new wxPropertyCategory("Stream Settings"));
                
                for (SoapySDR::ArgInfo arg : args) {
                  
                    streamProps[arg.key] = addArgInfoProperty(m_propertyGrid, arg);
                }
            }
        }
        
        if (selDev->isManual()) {
            m_addRemoteButton->SetLabel("Remove");
            removeId = selId;
        } else {
            m_addRemoteButton->SetLabel("Add");
            removeId = nullptr;
        }
        
    } else if (selDev && !selDev->isAvailable() && selDev->isManual()) {
        m_propertyGrid->Clear();

        devSettings.clear();
        runtimeArgs.clear();
        runtimeProps.clear();
        streamProps.clear();

        removeId = devTree->GetSelection();
        dev = nullptr;
        selId = nullptr;
        editId = nullptr;
        
        m_addRemoteButton->SetLabel("Remove");
    } else if (!selDev) {
        m_addRemoteButton->SetLabel("Add");
        removeId = nullptr;
    }
}
コード例 #3
0
ファイル: SDREnumerator.cpp プロジェクト: viraptor/CubicSDR
std::vector<SDRDeviceInfo *> *SDREnumerator::enumerate_devices(std::string remoteAddr, bool noInit) {

    if (SDREnumerator::devs[remoteAddr].size()) {
        return &SDREnumerator::devs[remoteAddr];
    }
    
    if (noInit) {
        return NULL;
    }
    
    if (!soapy_initialized) {
        std::cout << "SoapySDR init.." << std::endl;
        std::cout << "\tAPI Version: v" << SoapySDR::getAPIVersion() << std::endl;
        std::cout << "\tABI Version: v" << SoapySDR::getABIVersion() << std::endl;
        std::cout << "\tInstall root: " << SoapySDR::getRootPath() << std::endl;
        
        std::cout << "\tLoading modules... " << std::endl;
        
        std::string userModPath = wxGetApp().getModulePath();
        
        if (userModPath != "") {
            wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, "Loading SoapySDR modules from " + userModPath + "..");
            std::vector<std::string> localMods = SoapySDR::listModules(userModPath);
            for (std::vector<std::string>::iterator mods_i = localMods.begin(); mods_i != localMods.end(); mods_i++) {
                wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, "Initializing user specified SoapySDR module " + (*mods_i) + "..");
                std::cout << "Initializing user specified SoapySDR module " << (*mods_i) <<  ".." << std::endl;
                SoapySDR::loadModule(*mods_i);
            }
        } else {
            #ifdef BUNDLE_SOAPY_MODS
            bool localModPref = wxGetApp().getUseLocalMod();
            if (localModPref) {
                wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, "Loading SoapySDR modules..");
                std::cout << "Checking local system SoapySDR modules.." << std::flush;
                SoapySDR::loadModules();
            }

            wxFileName exePath = wxFileName(wxStandardPaths::Get().GetExecutablePath());
            std::vector<std::string> localMods = SoapySDR::listModules(exePath.GetPath().ToStdString() + "/modules/");
            for (std::vector<std::string>::iterator mods_i = localMods.begin(); mods_i != localMods.end(); mods_i++) {
                wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, "Initializing bundled SoapySDR module " + (*mods_i) + "..");
                std::cout << "Loading bundled SoapySDR module " << (*mods_i) <<  ".." << std::endl;
                SoapySDR::loadModule(*mods_i);
            }
        
            if (!localModPref) {
                wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, "Loading SoapySDR modules..");
                std::cout << "Checking system SoapySDR modules.." << std::flush;
                SoapySDR::loadModules();
            }
            #else
            wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, "Loading SoapySDR modules..");
            SoapySDR::loadModules();
            #endif

        }
        
        if (SDREnumerator::factories.size()) {
            SDREnumerator::factories.erase(SDREnumerator::factories.begin(), SDREnumerator::factories.end());
        }
        
        std::cout << "\tAvailable factories...";
        SoapySDR::FindFunctions factories = SoapySDR::Registry::listFindFunctions();
        for (SoapySDR::FindFunctions::const_iterator it = factories.begin(); it != factories.end(); ++it) {
            if (it != factories.begin()) {
                std::cout << ", ";
            }
            std::cout << it->first;
            
            if (it->first == "remote") {
                has_remote = true;
            }
            SDREnumerator::factories.push_back(it->first);
        }
        if (factories.empty()) {
            std::cout << "No factories found!" << std::endl;
        }
        if ((factories.size() == 1) && factories.find("null") != factories.end()) {
            std::cout << "Just 'null' factory found." << std::endl;
            wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_FAILED, std::string("No modules available."));
        }
        std::cout << std::endl;
        soapy_initialized = true;
    }
    
    modules = SoapySDR::listModules();

    std::vector<SoapySDR::Kwargs> results;
    SoapySDR::Kwargs enumArgs;
    bool isRemote = false;
    
    if (remoteAddr.length()) {
        std::cout << "Enumerating remote address: " << remoteAddr << std::endl;
        enumArgs["driver"] = "remote";
        enumArgs["remote"] = remoteAddr;
        isRemote = true;
        
        results = SoapySDR::Device::enumerate(enumArgs);
    } else {
        results = SoapySDR::Device::enumerate();
    }
    
    int manualsIdx = results.size();
    std::vector<std::string> manualParams;
    std::vector<bool> manualResult;
    
    if (manuals.size()) {
        for (std::vector<SDRManualDef>::const_iterator m_i = manuals.begin(); m_i != manuals.end(); m_i++) {
            std::vector<SoapySDR::Kwargs> manual_result;

            std::string strDevArgs = "driver="+m_i->factory+","+m_i->params;
            
            manualParams.push_back(m_i->params);
            
            wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, std::string("Enumerating manual device '") + strDevArgs + "'..");

            manual_result = SoapySDR::Device::enumerate(strDevArgs);
            
            if (manual_result.size()) {
                for (std::vector<SoapySDR::Kwargs>::const_iterator i = manual_result.begin(); i != manual_result.end(); i++) {
                    results.push_back(*i);
                    manualResult.push_back(true);
                }
            } else {
                SoapySDR::Kwargs failedEnum;
                failedEnum = argsStrToKwargs(strDevArgs);
                failedEnum["label"] = "Not Found ("+m_i->factory+")";
                results.push_back(failedEnum);
                manualResult.push_back(false);
            }
        }
    }
    
    if (isRemote) {
        wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, std::string("Opening remote server ") + remoteAddr + "..");
    }
    for (size_t i = 0; i < results.size(); i++) {
        SDRDeviceInfo *dev = new SDRDeviceInfo();
        
        SoapySDR::Kwargs deviceArgs = results[i];

        for (SoapySDR::Kwargs::const_iterator it = deviceArgs.begin(); it != deviceArgs.end(); ++it) {
            std::cout << "  " << it->first << " = " << it->second << std::endl;
            if (it->first == "driver") {
                dev->setDriver(it->second);
            } else if (it->first == "label" || it->first == "device") {
                dev->setName(it->second);
			}
        }
        
        
        if (deviceArgs.count("remote")) {
            isRemote = true;
        } else {
            isRemote = false;
        }
        
        dev->setRemote(isRemote);
        dev->setManual(i>=manualsIdx);
        if (i>=manualsIdx) {
            dev->setManualParams(manualParams[i-manualsIdx]);
        }
        
        std::cout << "Make device " << i << std::endl;
        if (i<manualsIdx || manualResult[i-manualsIdx]) try {
            SoapySDR::Device *device = SoapySDR::Device::make(deviceArgs);
            SoapySDR::Kwargs info = device->getHardwareInfo();
            for (SoapySDR::Kwargs::const_iterator it = info.begin(); it != info.end(); ++it) {
                std::cout << "  " << it->first << "=" << it->second << std::endl;
                if (it->first == "hardware") {
                    dev->setHardware(it->second);
                }
            }
            
            if (isRemote) {
                wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, "Querying remote " + remoteAddr + " device #" + std::to_string(i) + ": " + dev-> getName());
            } else {
                wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, std::string("Querying device #") + std::to_string(i) + ": " + dev->getName());
            }

            SoapySDR::ArgInfoList settingsInfo = device->getSettingInfo();

            DeviceConfig *cfg = wxGetApp().getConfig()->getDevice(dev->getDeviceId());

            ConfigSettings devSettings = cfg->getSettings();
            if (devSettings.size()) {
                for (ConfigSettings::const_iterator set_i = devSettings.begin(); set_i != devSettings.end(); set_i++) {
                    deviceArgs[set_i->first] = set_i->second;
                }
                for (int j = 0; j < settingsInfo.size(); j++) {
                    if (deviceArgs.find(settingsInfo[j].key) != deviceArgs.end()) {
                        settingsInfo[j].value = deviceArgs[settingsInfo[j].key];
                    }
                }
            }
            
            dev->setDeviceArgs(deviceArgs);
            dev->setSettingsInfo(settingsInfo);

            int numChan = device->getNumChannels(SOAPY_SDR_RX);
            for (int i = 0; i < numChan; i++) {
                SDRDeviceChannel *chan = new SDRDeviceChannel();

                SoapySDR::RangeList rfRange = device->getFrequencyRange(SOAPY_SDR_RX, i);
                double rfMin = rfRange[0].minimum();
                double rfMax = rfRange[rfRange.size()-1].maximum();
                chan->setChannel(i);
                chan->setFullDuplex(device->getFullDuplex(SOAPY_SDR_RX, i));
                chan->setRx(true);
                chan->setTx(false);
                chan->getRFRange().setLow(rfMin);
                chan->getRFRange().setHigh(rfMax);

                std::vector<std::string> freqs = device->listFrequencies(SOAPY_SDR_RX,i);
                if (std::find(freqs.begin(), freqs.end(), "CORR") != freqs.end()) {
                    chan->setCORR(true);
                } else {
                    chan->setCORR(false);
                }
                
                if (device->hasDCOffsetMode(SOAPY_SDR_RX, i)) {
                    chan->setHardwareDC(true);
                } else {
                    chan->setHardwareDC(false);
                }
                
                std::vector<double> rates = device->listSampleRates(SOAPY_SDR_RX, i);
                for (std::vector<double>::iterator i = rates.begin(); i != rates.end(); i++) {
                    chan->getSampleRates().push_back((long)(*i));
                }
                
                ConfigSettings devStreamOpts = cfg->getStreamOpts();
                if (devStreamOpts.size()) {
                    dev->setStreamArgs(devStreamOpts);
                }
                
                SoapySDR::ArgInfoList optArgs = device->getStreamArgsInfo(SOAPY_SDR_RX, i);

                if (devStreamOpts.size()) {
                    for (int j = 0, jMax = optArgs.size(); j < jMax; j++) {
                        if (devStreamOpts.find(optArgs[j].key) != devStreamOpts.end()) {
                            optArgs[j].value = devStreamOpts[optArgs[j].key];
                        }
                    }
                }
                chan->setStreamArgsInfo(optArgs);
                
                std::vector<std::string> gainNames = device->listGains(SOAPY_SDR_RX, i);
                
                for (std::vector<std::string>::iterator gname = gainNames.begin(); gname!= gainNames.end(); gname++) {
                    chan->addGain((*gname),device->getGainRange(SOAPY_SDR_RX, i, (*gname)));
                }
                
                dev->addChannel(chan);
            }
            
            SoapySDR::Device::unmake(device);
            
            dev->setAvailable(true);
        } catch (const std::exception &ex) {
            std::cerr << "Error making device: " << ex.what() << std::endl;
            wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, std::string("Error querying device #") + std::to_string(i));
            dev->setAvailable(false);
        } else {
            dev->setAvailable(false);
        }
        std::cout << std::endl;

        SDREnumerator::devs[remoteAddr].push_back(dev);
    }
    if (SDREnumerator::devs[remoteAddr].empty()) {
        wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, std::string("No devices found!"));
    }
    std::cout << std::endl;

    return &SDREnumerator::devs[remoteAddr];
}
コード例 #4
0
ファイル: SDRDevices.cpp プロジェクト: ctcat2008/CubicSDR
void SDRDevicesDialog::refreshDeviceProperties() {
    SDRDeviceInfo *selDev = getSelectedDevice(devTree->GetSelection());
    if (selDev && selDev->isAvailable()) {
        dev = selDev;
        selId = devTree->GetSelection();
        DeviceConfig *devConfig = wxGetApp().getConfig()->getDevice(dev->getName());
        m_propertyGrid->Clear();
        
        SoapySDR::Device *soapyDev = dev->getSoapyDevice();
        SoapySDR::ArgInfoList args = soapyDev->getSettingInfo();
        SoapySDR::ArgInfoList::const_iterator args_i;
        
        m_propertyGrid->Append(new wxPropertyCategory("General Settings"));
        
        devSettings.erase(devSettings.begin(),devSettings.end());
        devSettings["name"] = m_propertyGrid->Append( new wxStringProperty("Name", wxPG_LABEL, devConfig->getDeviceName()) );
        devSettings["offset"] = m_propertyGrid->Append( new wxIntProperty("Offset (Hz)", wxPG_LABEL, devConfig->getOffset()) );
        
        runtimeArgs.erase(runtimeArgs.begin(), runtimeArgs.end());
        runtimeProps.erase(runtimeProps.begin(), runtimeProps.end());
        streamProps.erase(streamProps.begin(), streamProps.end());
        
        if (args.size()) {
            m_propertyGrid->Append(new wxPropertyCategory("Run-time Settings"));
            
            for (args_i = args.begin(); args_i != args.end(); args_i++) {
                SoapySDR::ArgInfo arg = (*args_i);
                arg.value = soapyDev->readSetting(arg.key);
                runtimeProps[arg.key] = addArgInfoProperty(m_propertyGrid, arg);
                runtimeArgs[arg.key] = arg;
            }
        }
        
        if (dev) {
            args = dev->getSoapyDevice()->getStreamArgsInfo(SOAPY_SDR_RX, 0);
            
            DeviceConfig *devConfig = wxGetApp().getConfig()->getDevice(dev->getDeviceId());
            ConfigSettings devStreamOpts = devConfig->getStreamOpts();
            if (devStreamOpts.size()) {
                for (int j = 0, jMax = args.size(); j < jMax; j++) {
                    if (devStreamOpts.find(args[j].key) != devStreamOpts.end()) {
                        args[j].value = devStreamOpts[args[j].key];
                    }
                }
            }
            
            if (args.size()) {
                m_propertyGrid->Append(new wxPropertyCategory("Stream Settings"));
                
                for (args_i = args.begin(); args_i != args.end(); args_i++) {
                    SoapySDR::ArgInfo arg = (*args_i);
                    streamProps[arg.key] = addArgInfoProperty(m_propertyGrid, arg);
                }
            }
        }
        
        if (selDev->isManual()) {
            m_addRemoteButton->SetLabel("Remove");
            removeId = selId;
        } else {
            m_addRemoteButton->SetLabel("Add");
            removeId = nullptr;
        }
        
    } else if (selDev && !selDev->isAvailable() && selDev->isManual()) {
        m_propertyGrid->Clear();
        devSettings.erase(devSettings.begin(),devSettings.end());
        runtimeArgs.erase(runtimeArgs.begin(), runtimeArgs.end());
        runtimeProps.erase(runtimeProps.begin(), runtimeProps.end());
        streamProps.erase(streamProps.begin(), streamProps.end());
        removeId = devTree->GetSelection();
        dev = nullptr;
        selId = nullptr;
        editId = nullptr;
        
        m_addRemoteButton->SetLabel("Remove");
    } else if (!selDev) {
        m_addRemoteButton->SetLabel("Add");
        removeId = nullptr;
    }
}