bool TSerialPort::Select(const std::chrono::microseconds& us)
{
fd_set rfds;
struct timeval tv, *tvp = 0;
#if 0
// too verbose
if (Dbg)
std::cerr << "Select on " << Settings.Device << ": " << ms.count() << " us" << std::endl;
#endif
FD_ZERO(&rfds);
FD_SET(Fd, &rfds);
if (us.count() > 0) {
tv.tv_sec = us.count() / 1000000;
tv.tv_usec = us.count();
tvp = &tv;
}
int r = select(Fd + 1, &rfds, NULL, NULL, tvp);
if (r < 0)
throw TSerialDeviceException("select() failed");
return r > 0;
}
gint64 GSourceWrap::targetTimeForDelay(std::chrono::microseconds delay)
{
if (!delay.count())
return 0;
gint64 currentTime = g_get_monotonic_time();
gint64 targetTime = currentTime + std::min<gint64>(G_MAXINT64 - currentTime, delay.count());
ASSERT(targetTime >= currentTime);
return targetTime;
}
bool SocketImpl::Poll(const std::chrono::microseconds& timeout, int mode)
{
assert(INVALID_SOCKET != m_sockfd);
fd_set fdRead;
fd_set fdWrite;
fd_set fdExcept;
FD_ZERO(&fdRead);
FD_ZERO(&fdWrite);
FD_ZERO(&fdExcept);
if (mode & SELECT_READ)
{
FD_SET(m_sockfd, &fdRead);
}
if (mode & SELECT_WRITE)
{
FD_SET(m_sockfd, &fdWrite);
}
if (mode & SELECT_ERROR)
{
FD_SET(m_sockfd, &fdExcept);
}
struct timeval tv;
tv.tv_sec = (long)std::chrono::duration_cast<std::chrono::seconds>(timeout).count();
tv.tv_usec = (long)(timeout.count() % 1000000);
return select(int(m_sockfd) + 1, &fdRead, &fdWrite, &fdExcept, &tv) > 0;
}
void
UnitTestClock<BaseClock>::setNow(const nanoseconds& timeSinceEpoch)
{
BOOST_ASSERT(boost::posix_time::microseconds(SLEEP_AFTER_TIME_CHANGE.count()) >
boost::asio::time_traits<steady_clock>::to_posix_duration(timeSinceEpoch -
m_currentTime));
m_currentTime = timeSinceEpoch;
std::this_thread::sleep_for(SLEEP_AFTER_TIME_CHANGE);
}
void tcapplication::update(std::chrono::microseconds delta)
{
double const count = static_cast<double>(delta.count());
double constexpr timestep = 16000;
g_xrot += 0.3 * count / timestep;
g_yrot += 0.2 * count / timestep;
g_zrot += 0.4 * count / timestep;
}
void cbPing(const vssp::header &header, const std::chrono::microseconds &delayRead)
{
ros::Time now = ros::Time::now() - ros::Duration(delayRead.count() * 0.001 * 0.001);
ros::Duration delay = ((now - timePing)
- ros::Duration(header.send_time_ms * 0.001 - header.received_time_ms * 0.001)) * 0.5;
ros::Time base = timePing + delay - ros::Duration(header.received_time_ms * 0.001);
if(timestampBase == ros::Time(0)) timestampBase = base;
else timestampBase += (base - timestampBase) * 0.01;
}
std::chrono::microseconds SYNCHRONISED(
const std::chrono::microseconds data) {
#if defined(SUPPORT_MPI)
unsigned int synchronisedData = static_cast<unsigned int>(data.count());
MPI_Bcast(&synchronisedData, 1, MPI_UNSIGNED, 0, MPI_COMM_WORLD);
return std::chrono::microseconds(synchronisedData);
#else
return data;
#endif
}
void Matrix::update(Input *input, std::chrono::microseconds delta)
{
if (getParent()->getComponent<Menu>()->getTime() < 0)
return;
m_timeToGlobalRun -= delta.count()/1000000.0;
if (m_timeToGlobalRun < 0) {
if (solve())
m_timeToGlobalRun = 0.5;
else
m_timeToGlobalRun = FLT_MAX;
}
}
void Watchdog::startTimer(std::chrono::microseconds limit)
{
JSC_GETJAVAENV_CHKRET(env);
static jmethodID mid = env->GetMethodID(
GetWatchdogTimerClass(env),
"fwkStart",
"(D)V");
ASSERT(mid);
env->CallVoidMethod(m_timer, mid, (jdouble) (limit.count() / (1000.0 * 1000.0)));
CheckAndClearException(env);
}
int main()
{
{
std::chrono::milliseconds ms(1);
std::chrono::microseconds us = ms;
assert(us.count() == 1000);
}
#if TEST_STD_VER >= 11
{
constexpr std::chrono::milliseconds ms(1);
constexpr std::chrono::microseconds us = ms;
static_assert(us.count() == 1000, "");
}
#endif
}
void APIC_Timer::oneshot(std::chrono::microseconds micros) noexcept
{
// prevent overflow
uint64_t ticks = micros.count() * ticks_per_micro;
if (ticks > 0xFFFFFFFF) ticks = 0xFFFFFFFF;
// set initial counter
auto& lapic = APIC::get();
lapic.timer_begin(ticks);
// re-enable interrupts if disabled
if (GET_TIMER().intr_enabled == false) {
GET_TIMER().intr_enabled = true;
lapic.timer_interrupt(true);
}
}
void GMainLoopSource::scheduleAfterDelay(const char* name, std::function<bool ()> function, std::chrono::microseconds delay, int priority, std::function<void ()> destroyFunction, GMainContext* context)
{
cancel();
ASSERT(!m_context.source);
m_context = {
adoptGRef(createMicrosecondsTimeoutSource(delay.count())),
nullptr, // cancellable
nullptr, // socketCancellable
nullptr, // voidCallback
WTF::move(function),
nullptr, // socketCallback
WTF::move(destroyFunction)
};
scheduleTimeoutSource(name, reinterpret_cast<GSourceFunc>(boolSourceCallback), priority, context);
}
Status PipeWindows::ReadWithTimeout(void *buf, size_t size,
const std::chrono::microseconds &duration,
size_t &bytes_read) {
if (!CanRead())
return Status(ERROR_INVALID_HANDLE, eErrorTypeWin32);
bytes_read = 0;
DWORD sys_bytes_read = size;
BOOL result = ::ReadFile(m_read, buf, sys_bytes_read, &sys_bytes_read,
&m_read_overlapped);
if (!result && GetLastError() != ERROR_IO_PENDING)
return Status(::GetLastError(), eErrorTypeWin32);
DWORD timeout = (duration == std::chrono::microseconds::zero())
? INFINITE
: duration.count() * 1000;
DWORD wait_result = ::WaitForSingleObject(m_read_overlapped.hEvent, timeout);
if (wait_result != WAIT_OBJECT_0) {
// The operation probably failed. However, if it timed out, we need to
// cancel the I/O.
// Between the time we returned from WaitForSingleObject and the time we
// call CancelIoEx,
// the operation may complete. If that hapens, CancelIoEx will fail and
// return ERROR_NOT_FOUND.
// If that happens, the original operation should be considered to have been
// successful.
bool failed = true;
DWORD failure_error = ::GetLastError();
if (wait_result == WAIT_TIMEOUT) {
BOOL cancel_result = CancelIoEx(m_read, &m_read_overlapped);
if (!cancel_result && GetLastError() == ERROR_NOT_FOUND)
failed = false;
}
if (failed)
return Status(failure_error, eErrorTypeWin32);
}
// Now we call GetOverlappedResult setting bWait to false, since we've already
// waited
// as long as we're willing to.
if (!GetOverlappedResult(m_read, &m_read_overlapped, &sys_bytes_read, FALSE))
return Status(::GetLastError(), eErrorTypeWin32);
bytes_read = sys_bytes_read;
return Status();
}
ssize_t socket_send(int sock, uint8_t *buf, size_t len)
{
ssize_t ret = super::socket_send(sock, buf, len);
m_bytes += ret - super::header_len();
if (m_start == timestamp())
m_start = timer::now();
m_end = timer::now();
if (!m_interval.count())
return ret;
wait();
m_timestamp_last = timer::now();
return ret;
}
void
UnitTestClock<BaseClock>::advance(const nanoseconds& duration)
{
m_currentTime += duration;
// On some platforms, boost::asio::io_service for deadline_timer (e.g., the one used in
// Scheduler) will call time_traits<>::now() and will "sleep" for
// time_traits<>::to_posix_time(duration) period before calling time_traits<>::now()
// again. (Note that such "sleep" will occur even if there is no actual waiting and
// program is calling io_service.poll().)
//
// As a result, in order for the clock advancement to be effective, we must sleep for a
// period greater than time_traits<>::to_posix_time().
//
// See also http://blog.think-async.com/2007/08/time-travel.html
BOOST_ASSERT(boost::posix_time::microseconds(SLEEP_AFTER_TIME_CHANGE.count()) >
boost::asio::time_traits<steady_clock>::to_posix_duration(duration));
std::this_thread::sleep_for(SLEEP_AFTER_TIME_CHANGE);
}
void TextOutput::finishSuite(const std::string& suiteName, const unsigned int numTests, const unsigned int numPositiveTests, const std::chrono::microseconds totalDuration)
{
if(mode <= Verbose || numTests != numPositiveTests)
stream << "Suite '" << suiteName << "' finished, " << numPositiveTests << '/' << numTests << " successful (" << prettifyPercentage(numPositiveTests, numTests) << "%) in " << totalDuration.count() << " microseconds (" << totalDuration.count()/1000.0 << " ms)." << std::endl;
}
stringstream &cal_get_res(){
#ifdef DEBUG2
for(int i=0;i<planeVecA.size();i++)
cout<<planeVecA[i];
cout<<endl;
for(int i=0;i<16;i++)
cout<<resAssign[i]<<" ";
cout<<endl;
for(int i=0;i<16;i++)
cout<<resAssignGrid[i]<<" ";
cout<<endl;
cout<<curBomberNum<<endl;
#endif
for(int i=0;i<6;i++)
for(int j=0;j<4;j++){
answer_c[i][j]=" - ";
answer_n[i][j]=" - ";
}
int f=0;
for(int i=0;resSign[i]!='\0';i++){
Grid &tGrid=gridVec[i];
if(resSign[i]=='1'){
answer_c[tGrid.carrierPos][tGrid.gridPos]=planeVecF[f].name;
answer_n[tGrid.carrierPos][tGrid.gridPos]=" - ";
f++;
}
}
int shipHit[6];
float shipAtk[6];
memset(shipAtk,0,sizeof(shipAtk));
memset(shipHit,0,sizeof(shipHit));
for(int i=0;i<resBomberNum;i++){
answer_c[resAssign[i]][resAssignGrid[i]]=ResPlaneVecA[i].name;
answer_n[resAssign[i]][resAssignGrid[i]] = formula_damageOP_str(theCarrier[resAssign[i]].gridSize[resAssignGrid[i]],ResPlaneVecA[i]);
shipAtk[resAssign[i]] += formulaDamage(ResPlaneVecA[i]);
shipHit[resAssign[i]] += ResPlaneVecA[i].accuracy;
}
stringstream &stmp=*(new stringstream());
for(int i=0;i<6;i++){
for(int j=0;j<4;j++)
stmp<<answer_c[i][j]<<"|";
stmp<<endl;
}
for(int i=0;i<6;i++){
for(int j=0;j<4;j++)
stmp<<answer_n[i][j]<<"|";
if(shipAtk[i] == 0){
stmp<<" - | - |"<<endl;
continue;
}
int rd = formula_shipAtk_rawDamage(shipAtk[i], theCarrier[i].atk);
stmp<<formula_shipAtk_cocurHeading(rd)<<'|'<<formula_shipAtk_invertHeading(rd)<<'|'<<endl;
}
cout<<"AS: "<<resAS<<" Atk: "<<resAtk<<" time: "<<(restime.count()/1000.0)<<" ms"<<endl;
return stmp;
}
void baoliSearch(int curlv,int remainF,int remainA,int gridSz){
if(curlv == gridSz || (remainF == 0 && remainA == 0)){//µÝ¹é³ö¿Ú
if(restime=std::chrono::duration_cast<std::chrono::microseconds>(std::chrono::system_clock::now()-logtime),restime.count()>TLE*1000000){
cout<<"ERROR:TLE"<<endl;
exit(0);
}
int tAssignN[4] = {0, 0, 0, 0};
getAssignN(tAssignN, gridSz);//sav avail grids num to ships
BelongStructure &curres=dpRes[tAssignN[0]][tAssignN[1]][tAssignN[2]][tAssignN[3]];
vector<int *> &tlist=curres.belongings;
int i=0;
for(vector<int *>::iterator iter=tlist.begin(),end=tlist.end();iter!=end;++iter){
getCurAssign(iter);
float newAtk = curres.as[i++] + op_coef * calOPAtk(gridSz);
if(newAtk > resAtk){
int newAS = calAS(gridSz) + calASofBomber(gridSz);
if(newAS >= tarAirSupremacy){
//write cur data to res
resAtk = newAtk;
resAS = newAS;
resBomberNum = curBomberNum - remainA;
copySign2Res(resSign, gridSz);
copyCurAssign2Res(resAssign,resAssignGrid);
if(flushFlag){
ResPlaneVecA = planeVecA;
flushFlag = 0;
}
}
}
}
return;
}
if(remainF){//³¢ÊÔ·ÅÖÃÕ½¶·»ú£¬¼ì²â·£Õ¾
sign[curlv]=1;
baoliSearch(curlv+1,remainF-1,remainA,gridSz);
sign[curlv]=0;
}
if(remainA){//³¢ÊÔ·ÅÖù¥»÷»ú
sign[curlv]=2;
if(cutF(curlv+1,remainF,gridSz)){
if(gridVec[curlv].isFighterOnly){
sign[curlv]=0;
baoliSearch(curlv+1,remainF,remainA,gridSz);
}
else baoliSearch(curlv+1,remainF,remainA-1,gridSz);
}
sign[curlv]=0;
}
}
inline void portable_sleep(std::chrono::microseconds const& time)
{ native_sleep(time.count()); }
// Given the tempo, convert a time to a beat value
Beats microsToBeats(const std::chrono::microseconds micros) const
{
return Beats{micros.count() / static_cast<double>(microsPerBeat().count())};
}
Tempo(const std::chrono::microseconds microsPerBeat)
: std::tuple<double>(60. * 1e6 / microsPerBeat.count())
{
}
timeval getTimevalFromDuration(const std::chrono::microseconds &t){
timeval retval;
retval.tv_sec = std::chrono::duration_cast<std::chrono::seconds>(t).count();
retval.tv_usec = t.count() % 1000000;
return retval;
}
int TSerialPort::ReadFrame(uint8_t* buf, int size,
const std::chrono::microseconds& timeout,
TFrameCompletePred frame_complete)
{
CheckPortOpen();
int nread = 0;
while (nread < size) {
if (frame_complete && frame_complete(buf, nread)) {
// XXX A hack.
// The problem is that if we don't pause here and the
// serial client switches to another device after
// processing this frame, that device may miss the frame
// boundary and consider the last response (from this
// device) and the query (from the master) to be single
// frame. On the other hand, we don't want to use
// device-specific frame timeout here as it can be quite
// long. The proper solution would be perhaps ensuring
// that there's a pause of at least
// DeviceConfig->FrameTimeoutMs before polling each
// device.
usleep(DefaultFrameTimeout.count());
break;
}
if (!Select(!nread ? Settings.ResponseTimeout :
timeout.count() < 0 ? DefaultFrameTimeout :
timeout))
break; // end of the frame
// We don't want to use non-blocking IO in general
// (e.g. we want blocking writes), but we don't want
// read() call below to block because actual frame
// size is not known at this point. So we must
// know how many bytes are available
int nb;
if (ioctl(Fd, FIONREAD, &nb) < 0)
throw TSerialDeviceException("FIONREAD ioctl() failed");
if (!nb)
continue; // shouldn't happen, actually
if (nb > size - nread)
nb = size - nread;
int n = read(Fd, buf + nread, nb);
if (n < 0)
throw TSerialDeviceException("read() failed");
if (n < nb) // may happen only due to a kernel/driver bug
throw TSerialDeviceException("short read()");
nread += nb;
}
if (!nread)
throw TSerialDeviceTransientErrorException("request timed out");
if (Dbg) {
// TBD: move this to libwbmqtt (HexDump?)
std::ios::fmtflags f(std::cerr.flags());
std::cerr << "ReadFrame:" << std::hex << std::uppercase << std::setfill('0');
for (int i = 0; i < nread; ++i) {
std::cerr << " " << std::setw(2) << int(buf[i]);
}
std::cerr << std::endl;
std::cerr.flags(f);
}
return nread;
}
void TSerialPort::Sleep(const std::chrono::microseconds& us)
{
usleep(us.count());
}
void setFilterTime(std::chrono::microseconds _time) {
setFilterSize((m_sampleRate*_time.count())/1000000LL);
}