コード例 #1
0
void StreamHandler::UpdateListeningForEIT(void)
{
    vector<uint> add_eit, del_eit;

    QMutexLocker read_locker(&_listener_lock);

    StreamDataList::const_iterator it = _stream_data_list.begin();
    for (; it != _stream_data_list.end(); ++it)
    {
        MPEGStreamData *sd = it.key();
        if (sd->HasEITPIDChanges(_eit_pids) &&
            sd->GetEITPIDChanges(_eit_pids, add_eit, del_eit))
        {
            for (uint i = 0; i < del_eit.size(); i++)
            {
                uint_vec_t::iterator it;
                it = find(_eit_pids.begin(), _eit_pids.end(), del_eit[i]);
                if (it != _eit_pids.end())
                    _eit_pids.erase(it);
                sd->RemoveListeningPID(del_eit[i]);
            }

            for (uint i = 0; i < add_eit.size(); i++)
            {
                _eit_pids.push_back(add_eit[i]);
                sd->AddListeningPID(add_eit[i]);
            }
        }
    }
}
コード例 #2
0
/** \fn DVBStreamHandler::RunSR(void)
 *  \brief Uses "Section" reader to read a DVB device for tables
 *
 *  This currently only supports DVB streams, ATSC and the raw MPEG
 *  streams used by some cable and satelite providers is not supported.
 */
void DVBStreamHandler::RunSR(void)
{
    int buffer_size = 4192;  // maximum size of Section we handle
    unsigned char *buffer = new unsigned char[buffer_size];
    if (!buffer)
    {
        _error = true;
        return;
    }

    SetRunning(true, _needs_buffering, true);

    LOG(VB_RECORD, LOG_INFO, LOC + "RunSR(): begin");

    while (_running_desired && !_error)
    {
        RetuneMonitor();
        UpdateFiltersFromStreamData();

        QMutexLocker read_locker(&_pid_lock);

        bool readSomething = false;
        PIDInfoMap::const_iterator fit = _pid_info.begin();
        for (; fit != _pid_info.end(); ++fit)
        {
            int len = read((*fit)->filter_fd, buffer, buffer_size);
            if (len <= 0)
                continue;

            readSomething = true;

            const PESPacket pes = PESPacket::ViewData(buffer);
            const PSIPTable psip(pes);

            if (psip.SectionSyntaxIndicator())
            {
                _listener_lock.lock();
                StreamDataList::const_iterator sit = _stream_data_list.begin();
                for (; sit != _stream_data_list.end(); ++sit)
                    sit.key()->HandleTables(fit.key() /* pid */, psip);
                _listener_lock.unlock();
            }
        }

        if (!readSomething)
            usleep(3000);
    }
    LOG(VB_RECORD, LOG_INFO, LOC + "RunSR(): " + "shutdown");

    RemoveAllPIDFilters();

    delete[] buffer;

    SetRunning(false, _needs_buffering, true);

    LOG(VB_RECORD, LOG_INFO, LOC + "RunSR(): " + "end");
}
コード例 #3
0
bool StreamHandler::UpdateFiltersFromStreamData(void)
{
    UpdateListeningForEIT();

    pid_map_t pids;

    {
        QMutexLocker read_locker(&_listener_lock);
        StreamDataList::const_iterator it = _stream_data_list.begin();
        for (; it != _stream_data_list.end(); ++it)
            it.key()->GetPIDs(pids);
    }

    QMap<uint, PIDInfo*> add_pids;
    vector<uint>         del_pids;

    {
        QMutexLocker read_locker(&_pid_lock);

        // PIDs that need to be added..
        pid_map_t::const_iterator lit = pids.constBegin();
        for (; lit != pids.constEnd(); ++lit)
        {
            if (*lit && (_pid_info.find(lit.key()) == _pid_info.end()))
            {
                add_pids[lit.key()] = CreatePIDInfo(
                    lit.key(), StreamID::PrivSec, 0);
            }
        }

        // PIDs that need to be removed..
        PIDInfoMap::const_iterator fit = _pid_info.begin();
        for (; fit != _pid_info.end(); ++fit)
        {
            bool in_pids = pids.find(fit.key()) != pids.end();
            if (!in_pids)
                del_pids.push_back(fit.key());
        }
    }

    // Remove PIDs
    bool ok = true;
    vector<uint>::iterator dit = del_pids.begin();
    for (; dit != del_pids.end(); ++dit)
        ok &= RemovePIDFilter(*dit);

    // Add PIDs
    QMap<uint, PIDInfo*>::iterator ait = add_pids.begin();
    for (; ait != add_pids.end(); ++ait)
        ok &= AddPIDFilter(*ait);

    // Cycle filters if it's been a while
    if (_cycle_timer.elapsed() > 1000)
        CycleFiltersByPriority();

    return ok;
}
コード例 #4
0
PIDPriority StreamHandler::GetPIDPriority(uint pid) const
{
    QMutexLocker reading_locker(&_listener_lock);

    PIDPriority tmp = kPIDPriorityNone;

    StreamDataList::const_iterator it = _stream_data_list.begin();
    for (; it != _stream_data_list.end(); ++it)
        tmp = max(tmp, it.key()->GetPIDPriority(pid));

    return tmp;
}
コード例 #5
0
bool ExternalStreamHandler::StartStreaming(bool flush_buffer)
{
    QString result;

    QMutexLocker locker(&m_stream_lock);

    LOG(VB_RECORD, LOG_INFO, LOC +
        QString("StartStreaming with %1 current listeners")
        .arg(StreamingCount()));

    if (!IsOpen())
    {
        LOG(VB_GENERAL, LOG_ERR, LOC + "External recorder not started.");
        return false;
    }

    if (StreamingCount() == 0)
    {
        if (flush_buffer)
        {
            /* If the input is not a 'broadcast' it may only one have
             * copy of the SPS right at the beginning of the stream,
             * so make sure we don't miss it!
             */
            QMutexLocker listen_lock(&_listener_lock);

            if (!_stream_data_list.empty())
            {
                StreamDataList::const_iterator sit = _stream_data_list.begin();
                for (; sit != _stream_data_list.end(); ++sit)
                    sit.key()->ProcessData(reinterpret_cast<const uint8_t *>
                                           (m_replay_buffer.constData()),
                                           m_replay_buffer.size());
            }
            LOG(VB_RECORD, LOG_INFO, LOC + QString("Replayed %1 bytes")
                .arg(m_replay_buffer.size()));
            m_replay_buffer.clear();
            m_replay = false;
        }

        if (!ProcessCommand("StartStreaming", 5000, result))
        {
            LOG(VB_GENERAL, LOG_ERR, LOC + QString("StartStreaming failed: '%1'")
                .arg(result));
            if (!result.startsWith("Warn"))
            {
                _error = true;
                m_error = QString("StartStreaming failed: '%1'").arg(result);
            }
            return false;
        }

        if (result != "OK:Started")
        {
            LOG(VB_GENERAL, LOG_WARNING, LOC +
                QString("StartStreaming failed: '%1'").arg(result));
            return false;
        }

        LOG(VB_RECORD, LOG_INFO, LOC + "Streaming started");
    }
    else
        LOG(VB_RECORD, LOG_INFO, LOC + "Already streaming");

    m_streaming_cnt.ref();

    LOG(VB_RECORD, LOG_INFO, LOC +
        QString("StartStreaming %1 listeners")
        .arg(StreamingCount()));

    return true;
}
コード例 #6
0
void ExternalStreamHandler::run(void)
{
    QString    cmd;
    QString    result;
    QString    xon;
    QByteArray buffer;
    uint       len;

    RunProlog();

    LOG(VB_RECORD, LOG_INFO, LOC + "run(): begin");

    SetRunning(true, true, false);

    if (m_poll_mode)
        xon = QString("SendBytes:%1").arg(PACKET_SIZE);
    else
        xon = "XON";

    uint remainder = 0;
    while (_running_desired && !_error)
    {
        if (!IsOpen())
        {
            if (!Open())
            {
                LOG(VB_RECORD, LOG_WARNING, LOC + QString("TS not open yet: %1")
                    .arg(m_error));
                usleep(750000);
                continue;
            }
        }

        if (StreamingCount() == 0)
        {
            usleep(5000);
            continue;
        }

        UpdateFiltersFromStreamData();

        ProcessCommand(xon, 1000, result);
        if (result.startsWith("ERR"))
        {
            LOG(VB_GENERAL, LOG_ERR, LOC + QString("Aborting: %1 -> %2")
                .arg(xon).arg(result));
            _error = true;
        }

        while ((len = m_IO->Read(buffer, PACKET_SIZE, 10)) > 0 ||
               buffer.size() > 188*50)
        {
            if (m_IO->Error())
            {
                m_error = m_IO->ErrorString();
                _error = true;
                LOG(VB_GENERAL, LOG_ERR, LOC +
                    QString("Failed to read from Extern recorder: %1")
                    .arg(m_error));
                break;
            }

            if (!_running_desired)
                break;

            if (!_listener_lock.tryLock())
                continue;

            if (_stream_data_list.empty())
            {
                LOG(VB_GENERAL, LOG_ERR, LOC + "_stream_data_list is empty");
                _listener_lock.unlock();
                continue;
            }

            if (!m_poll_mode)
            {
                ProcessCommand(QString("XOFF"), 50, result);
                if (result.startsWith("ERR"))
                {
                    LOG(VB_GENERAL, LOG_ERR, LOC + QString("Aborting: %1 -> %2")
                        .arg(xon).arg(result));
                    _error = true;
                }
            }

            StreamDataList::const_iterator sit = _stream_data_list.begin();
            for (; sit != _stream_data_list.end(); ++sit)
                remainder = sit.key()->ProcessData
                            (reinterpret_cast<const uint8_t *>
                             (buffer.constData()), buffer.size());

            _listener_lock.unlock();

            len = buffer.size();

            if (m_replay)
            {
                m_replay_buffer += buffer.left(len - remainder);
                if (m_replay_buffer.size() > (5000 * PACKET_SIZE))
                {
                    m_replay_buffer.remove(0, len - remainder);
                    LOG(VB_RECORD, LOG_WARNING, LOC +
                        QString("Replay size truncated to %1 bytes")
                        .arg(m_replay_buffer.size()));
                }
            }

            if (remainder > 0 && (len > remainder)) // leftover bytes
                buffer.remove(0, len - remainder);
            else
                buffer.clear();
        }
        usleep(10);
    }
    LOG(VB_RECORD, LOG_INFO, LOC + "run(): " + "shutdown");

    RemoveAllPIDFilters();
    SetRunning(false, true, false);

    LOG(VB_RECORD, LOG_INFO, LOC + "run(): " + "end");

    RunEpilog();
}
コード例 #7
0
void CetonStreamHandler::run(void)
{
    RunProlog();
    bool _error = false;

    QFile file(_device_path);
    CetonRTP rtp(_ip_address, _tuner);

    if (_using_rtp)
    {
        if (!(rtp.Init() && rtp.StartStreaming()))
        {
            LOG(VB_RECORD, LOG_ERR, LOC +
                "Starting recording (RTP initialization failed). Aborting.");
            _error = true;
        }
    }
    else
    {
        if (!file.open(QIODevice::ReadOnly))
        {
            LOG(VB_RECORD, LOG_ERR, LOC +
                "Starting recording (file open failed). Aborting.");
            _error = true;
        }

        int flags = fcntl(file.handle(), F_GETFL, 0);
        if (flags == -1) flags = 0;
        fcntl(file.handle(), F_SETFL, flags | O_NONBLOCK);
    }

    if (_error)
    {
        RunEpilog();
        return;
    }

    SetRunning(true, false, false);

    int buffer_size = (64 * 1024); // read about 64KB
    buffer_size /= TSPacket::kSize;
    buffer_size *= TSPacket::kSize;
    char *buffer = new char[buffer_size];

    LOG(VB_RECORD, LOG_INFO, LOC + "RunTS(): begin");

    _read_timer.start();

    int remainder = 0;
    while (_running_desired && !_error)
    {
        int bytes_read;
        if (_using_rtp)
            bytes_read = rtp.Read(buffer, buffer_size);
        else
            bytes_read = file.read(buffer, buffer_size);

        if (bytes_read <= 0)
        {
            if (_read_timer.elapsed() >= 5000)
            {
                LOG(VB_RECORD, LOG_WARNING, LOC +
                    "No data received for 5 seconds...checking tuning");
                if (!VerifyTuning())
                    RepeatTuning();
                _read_timer.start();
            }

            usleep(5000);
            continue;
        }

        _read_timer.start();

        _listener_lock.lock();

        if (_stream_data_list.empty())
        {
            _listener_lock.unlock();
            continue;
        }

        StreamDataList::const_iterator sit = _stream_data_list.begin();
        for (; sit != _stream_data_list.end(); ++sit)
            remainder = sit.key()->ProcessData(
                reinterpret_cast<unsigned char*>(buffer), bytes_read);

        _listener_lock.unlock();
        if (remainder != 0)
        {
            LOG(VB_RECORD, LOG_INFO, LOC +
                QString("RunTS(): bytes_read = %1 remainder = %2")
                    .arg(bytes_read).arg(remainder));
        }
    }
    LOG(VB_RECORD, LOG_INFO, LOC + "RunTS(): " + "shutdown");

    if (_using_rtp)
        rtp.StopStreaming();
    else
        file.close();

    delete[] buffer;

    LOG(VB_RECORD, LOG_INFO, LOC + "RunTS(): " + "end");

    SetRunning(false, false, false);
    RunEpilog();
}
コード例 #8
0
ファイル: hdhrstreamhandler.cpp プロジェクト: awithers/mythtv
/** \fn HDHRStreamHandler::run(void)
 *  \brief Reads HDHomeRun socket for tables & data
 */
void HDHRStreamHandler::run(void)
{
    RunProlog();
    /* Create TS socket. */
    if (!hdhomerun_device_stream_start(_hdhomerun_device))
    {
        LOG(VB_GENERAL, LOG_ERR, LOC +
            "Starting recording (set target failed). Aborting.");
        _error = true;
        RunEpilog();
        return;
    }
    hdhomerun_device_stream_flush(_hdhomerun_device);

    SetRunning(true, false, false);

    LOG(VB_RECORD, LOG_INFO, LOC + "RunTS(): begin");

    int remainder = 0;
    QTime last_update;
    while (_running_desired && !_error)
    {
        int elapsed = !last_update.isValid() ? -1 : last_update.elapsed();
        elapsed = (elapsed < 0) ? 1000 : elapsed;
        if (elapsed > 100)
        {
            UpdateFiltersFromStreamData();
            if (_tune_mode != hdhrTuneModeVChannel)
                UpdateFilters();
            last_update.restart();
        }

        size_t read_size = 64 * 1024; // read about 64KB
        read_size /= VIDEO_DATA_PACKET_SIZE;
        read_size *= VIDEO_DATA_PACKET_SIZE;

        size_t data_length;
        unsigned char *data_buffer = hdhomerun_device_stream_recv(
            _hdhomerun_device, read_size, &data_length);

        if (!data_buffer)
        {
            usleep(20000);
            continue;
        }

        // Assume data_length is a multiple of 188 (packet size)

        _listener_lock.lock();

        if (_stream_data_list.empty())
        {
            _listener_lock.unlock();
            continue;
        }

        StreamDataList::const_iterator sit = _stream_data_list.begin();
        for (; sit != _stream_data_list.end(); ++sit)
            remainder = sit.key()->ProcessData(data_buffer, data_length);

        _listener_lock.unlock();
        if (remainder != 0)
        {
            LOG(VB_RECORD, LOG_INFO, LOC +
                QString("RunTS(): data_length = %1 remainder = %2")
                    .arg(data_length).arg(remainder));
        }
    }
    LOG(VB_RECORD, LOG_INFO, LOC + "RunTS(): " + "shutdown");

    RemoveAllPIDFilters();

    hdhomerun_device_stream_stop(_hdhomerun_device);
    LOG(VB_RECORD, LOG_INFO, LOC + "RunTS(): " + "end");

    SetRunning(false, false, false);
    RunEpilog();
}
コード例 #9
0
void ASIStreamHandler::run(void)
{
    RunProlog();

    LOG(VB_RECORD, LOG_INFO, LOC + "run(): begin");

    if (!Open())
    {
        LOG(VB_GENERAL, LOG_ERR, LOC + QString("Failed to open device %1 : %2")
                .arg(_device).arg(strerror(errno)));
        _error = true;
        return;
    }

    DeviceReadBuffer *drb = new DeviceReadBuffer(this, true, false);
    bool ok = drb->Setup(_device, _fd, _packet_size, _buf_size);
    if (!ok)
    {
        LOG(VB_GENERAL, LOG_ERR, LOC + "Failed to allocate DRB buffer");
        delete drb;
        drb = NULL;
        Close();
        _error = true;
        RunEpilog();
        return;
    }

    uint buffer_size = _packet_size * 15000;
    unsigned char *buffer = new unsigned char[buffer_size];
    if (!buffer)
    {
        LOG(VB_GENERAL, LOG_ERR, LOC + "Failed to allocate buffer");
        delete drb;
        drb = NULL;
        Close();
        _error = true;
        RunEpilog();
        return;
    }
    memset(buffer, 0, buffer_size);

    SetRunning(true, true, false);

    drb->Start();

    {
        QMutexLocker locker(&_start_stop_lock);
        _drb = drb;
    }

    int remainder = 0;
    while (_running_desired && !_error)
    {
        UpdateFiltersFromStreamData();

        ssize_t len = 0;

        len = drb->Read(
            &(buffer[remainder]), buffer_size - remainder);

        if (!_running_desired)
            break;

        // Check for DRB errors
        if (drb->IsErrored())
        {
            LOG(VB_GENERAL, LOG_ERR, LOC + "Device error detected");
            _error = true;
        }

        if (drb->IsEOF())
        {
            LOG(VB_GENERAL, LOG_ERR, LOC + "Device EOF detected");
            _error = true;
        }

        if ((0 == len) || (-1 == len))
        {
            usleep(100);
            continue;
        }

        len += remainder;

        if (len < 10) // 10 bytes = 4 bytes TS header + 6 bytes PES header
        {
            remainder = len;
            continue;
        }

        if (!_listener_lock.tryLock())
        {
            remainder = len;
            continue;
        }

        if (_stream_data_list.empty())
        {
            _listener_lock.unlock();
            continue;
        }

        StreamDataList::const_iterator sit = _stream_data_list.begin();
        for (; sit != _stream_data_list.end(); ++sit)
            remainder = sit.key()->ProcessData(buffer, len);

        if (_mpts != NULL)
            _mpts->Write(buffer, len - remainder);

        _listener_lock.unlock();

        if (remainder > 0 && (len > remainder)) // leftover bytes
            memmove(buffer, &(buffer[len - remainder]), remainder);
    }
    LOG(VB_RECORD, LOG_INFO, LOC + "run(): " + "shutdown");

    RemoveAllPIDFilters();

    {
        QMutexLocker locker(&_start_stop_lock);
        _drb = NULL;
    }

    if (drb->IsRunning())
        drb->Stop();

    delete drb;
    delete[] buffer;
    Close();

    LOG(VB_RECORD, LOG_INFO, LOC + "run(): " + "end");

    SetRunning(false, true, false);
    RunEpilog();
}
コード例 #10
0
/** \fn DVBStreamHandler::RunTS(void)
 *  \brief Uses TS filtering devices to read a DVB device for tables & data
 *
 *  This supports all types of MPEG based stream data, but is extreemely
 *  slow with DVB over USB 1.0 devices which for efficiency reasons buffer
 *  a stream until a full block transfer buffer full of the requested
 *  tables is available. This takes a very long time when you are just
 *  waiting for a PAT or PMT table, and the buffer is hundreds of packets
 *  in size.
 */
void DVBStreamHandler::RunTS(void)
{
    QByteArray dvr_dev_path = _dvr_dev_path.toAscii();
    int dvr_fd;
    for (int tries = 1; ; ++tries)
    {
        dvr_fd = open(dvr_dev_path.constData(), O_RDONLY | O_NONBLOCK);
        if (dvr_fd >= 0)
            break;

        LOG(VB_GENERAL, LOG_WARNING, LOC +
            QString("Opening DVR device %1 failed : %2")
                .arg(_dvr_dev_path).arg(strerror(errno)));

        if (tries >= 20 || (errno != EBUSY && errno != EAGAIN))
        {
            LOG(VB_GENERAL, LOG_ERR, LOC +
                QString("Failed to open DVR device %1 : %2")
                    .arg(_dvr_dev_path).arg(strerror(errno)));
            _error = true;
            return;
        }
        usleep(50000);
    }

    int remainder = 0;
    int buffer_size = TSPacket::kSize * 15000;
    unsigned char *buffer = new unsigned char[buffer_size];
    if (!buffer)
    {
        LOG(VB_GENERAL, LOG_ERR, LOC + "Failed to allocate memory");
        close(dvr_fd);
        _error = true;
        return;
    }
    memset(buffer, 0, buffer_size);

    DeviceReadBuffer *drb = NULL;
    if (_needs_buffering)
    {
        drb = new DeviceReadBuffer(this, true, false);
        if (!drb->Setup(_device, dvr_fd))
        {
            LOG(VB_GENERAL, LOG_ERR, LOC + "Failed to allocate DRB buffer");
            delete drb;
            delete[] buffer;
            close(dvr_fd);
            _error = true;
            return;
        }

        drb->Start();
    }

    {
        // SetRunning() + set _drb
        QMutexLocker locker(&_start_stop_lock);
        _running = true;
        _using_buffering = _needs_buffering;
        _using_section_reader = false;
        _drb = drb;
    }

    LOG(VB_RECORD, LOG_INFO, LOC + "RunTS(): begin");

    fd_set fd_select_set;
    FD_ZERO(        &fd_select_set);
    FD_SET (dvr_fd, &fd_select_set);
    while (_running_desired && !_error)
    {
        RetuneMonitor();
        UpdateFiltersFromStreamData();

        ssize_t len = 0;

        if (drb)
        {
            len = drb->Read(
                &(buffer[remainder]), buffer_size - remainder);

            // Check for DRB errors
            if (drb->IsErrored())
            {
                LOG(VB_GENERAL, LOG_ERR, LOC + "Device error detected");
                _error = true;
            }

            if (drb->IsEOF() && _running_desired)
            {
                LOG(VB_GENERAL, LOG_ERR, LOC + "Device EOF detected");
                _error = true;
            }
        }
        else
        {
            // timeout gets reset by select, so we need to create new one
            struct timeval timeout = { 0, 50 /* ms */ * 1000 /* -> usec */ };
            int ret = select(dvr_fd+1, &fd_select_set, NULL, NULL, &timeout);
            if (ret == -1 && errno != EINTR)
            {
                LOG(VB_GENERAL, LOG_ERR, LOC + "select() failed" + ENO);
            }
            else
            {
                len = read(dvr_fd, &(buffer[remainder]),
                           buffer_size - remainder);
            }
        }

        if ((0 == len) || (-1 == len))
        {
            usleep(100);
            continue;
        }

        len += remainder;

        if (len < 10) // 10 bytes = 4 bytes TS header + 6 bytes PES header
        {
            remainder = len;
            continue;
        }

        _listener_lock.lock();

        if (_stream_data_list.empty())
        {
            _listener_lock.unlock();
            continue;
        }

        StreamDataList::const_iterator sit = _stream_data_list.begin();
        for (; sit != _stream_data_list.end(); ++sit)
            remainder = sit.key()->ProcessData(buffer, len);

        _listener_lock.unlock();

        if (remainder > 0 && (len > remainder)) // leftover bytes
            memmove(buffer, &(buffer[len - remainder]), remainder);
    }
    LOG(VB_RECORD, LOG_INFO, LOC + "RunTS(): " + "shutdown");

    RemoveAllPIDFilters();

    {
        QMutexLocker locker(&_start_stop_lock);
        _drb = NULL;
    }

    if (drb)
    {
        if (drb->IsRunning())
            drb->Stop();
        delete drb;
    }

    close(dvr_fd);
    delete[] buffer;

    LOG(VB_RECORD, LOG_INFO, LOC + "RunTS(): " + "end");

    SetRunning(false, _needs_buffering, false);
}
コード例 #11
0
ファイル: hdhrstreamhandler.cpp プロジェクト: Openivo/mythtv
/** \fn HDHRStreamHandler::run(void)
 *  \brief Reads HDHomeRun socket for tables & data
 */
void HDHRStreamHandler::run(void)
{
    threadRegister("HDHRStreamHandler");
    /* Create TS socket. */
    if (!hdhomerun_device_stream_start(_hdhomerun_device))
    {
        LOG(VB_GENERAL, LOG_ERR, LOC +
            "Starting recording (set target failed). Aborting.");
        _error = true;
	threadDeregister();
        return;
    }
    hdhomerun_device_stream_flush(_hdhomerun_device);

    SetRunning(true, false, false);

    /* Calculate buffer size */
    uint buffersize = gCoreContext->GetNumSetting(
        "HDRingbufferSize", 50 * TSPacket::kSize) * 1024;
    buffersize /= VIDEO_DATA_PACKET_SIZE;
    buffersize *= VIDEO_DATA_PACKET_SIZE;
    buffersize = max(49 * TSPacket::kSize * 128, buffersize);

    LOG(VB_RECORD, LOG_INFO, LOC + "RunTS(): begin");

    int remainder = 0;
    while (_running_desired && !_error)
    {
        UpdateFiltersFromStreamData();
        UpdateFilters();

        size_t read_size = 64 * 1024; // read about 64KB
        read_size /= VIDEO_DATA_PACKET_SIZE;
        read_size *= VIDEO_DATA_PACKET_SIZE;

        size_t data_length;
        unsigned char *data_buffer = hdhomerun_device_stream_recv(
            _hdhomerun_device, read_size, &data_length);

        if (!data_buffer)
        {
            usleep(5000);
            continue;
        }

        // Assume data_length is a multiple of 188 (packet size)

        _listener_lock.lock();

        if (_stream_data_list.empty())
        {
            _listener_lock.unlock();
            continue;
        }

        StreamDataList::const_iterator sit = _stream_data_list.begin();
        for (; sit != _stream_data_list.end(); ++sit)
            remainder = sit.key()->ProcessData(data_buffer, data_length);

        _listener_lock.unlock();
        if (remainder != 0)
        {
            LOG(VB_RECORD, LOG_INFO, LOC +
                QString("RunTS(): data_length = %1 remainder = %2")
                    .arg(data_length).arg(remainder));
        }
    }
    LOG(VB_RECORD, LOG_INFO, LOC + "RunTS(): " + "shutdown");

    RemoveAllPIDFilters();

    hdhomerun_device_stream_stop(_hdhomerun_device);
    LOG(VB_RECORD, LOG_INFO, LOC + "RunTS(): " + "end");

    SetRunning(false, false, false);
    threadDeregister();
}
コード例 #12
0
void V4L2encStreamHandler::run(void)
{
    RunProlog();

    LOG(VB_RECORD, LOG_INFO, LOC + "run() -- begin");

    if (!IsOpen())
    {
        LOG(VB_GENERAL, LOG_WARNING, LOC +
            "Starting stream handler, but v4l2 is not open!");
        if (!Open())
        {
            LOG(VB_GENERAL, LOG_ERR, LOC +
                QString("run() -- Failed to open %1: ")
                .arg(_device) + ENO);
            _error = true;
            return;
        }
    }

#if 0
    // VBI
    if (m_vbi_fd >= 0)
        m_vbi_thread = new VBIThread(this);
#endif

    bool      good_data = false;
    bool      gap = false;
    QDateTime gap_start;

    int len, remainder = 0;

    QByteArray buffer;
    char* pkt_buf = new char[PACKET_SIZE + 1];

    SetRunning(true, true, false);

    while (_running_desired && !_error)
    {
        // Get V4L2 data
        if (m_streaming_cnt.load() == 0)
        {
            LOG(VB_RECORD, LOG_INFO, LOC + "Waiting for stream start.");
            QMutexLocker locker(&_start_stop_lock);
            _running_state_changed.wait(&_start_stop_lock, 5000);
            continue;
        }

        // Check for errors

        if (!m_drb)
            break;

        len = m_drb->Read(reinterpret_cast<unsigned char *>(pkt_buf),
                          PACKET_SIZE);
        if (m_drb->IsErrored())
        {
            LOG(VB_GENERAL, LOG_ERR, LOC + "run() -- Device error detected");

            if (good_data)
            {
                if (gap)
                {
                    /* Already processing a gap, which means
                     * restarting the encoding didn't work! */
                    m_failing = true;
                }
                else
                    gap = true;
            }

            RestartEncoding();
        }
        else if (m_drb->IsEOF())
        {
            LOG(VB_GENERAL, LOG_ERR, LOC + "run() -- Device EOF detected");
            _error = true;
        }
        else
        {
#if 0 // For this to work, the data needs to be propagated back up to
      // the 'recorder', but there could be multiple rcorders...

            // If we have seen good data, but now have a gap, note it
            if (good_data)
            {
                if (gap)
                {
                    QMutexLocker locker(&statisticsLock);
                    QDateTime gap_end(MythDate::current());

                    for (Irec = m_rec_gaps.begin();
                         Irec != m_rec_caps.end(); ++Irec)
                    {
                        (*Irec).push_back(RecordingGap
                                          (gap_start, gap_end));
                    }
                    LOG(VB_RECORD, LOG_DEBUG,
                        LOC + QString("Inserted gap %1 dur %2")
                        .arg(recordingGaps.back().toString())
                        .arg(gap_start.secsTo(gap_end)));
                    gap = false;
                }
                else
                    gap_start = MythDate::current();
            }
            else
                good_data = true;
#else
            good_data = true;
#endif
        }

        if (len < 0)
        {
            if (errno != EAGAIN)
                LOG(VB_GENERAL, LOG_ERR, LOC +
                    QString("run() -- error reading from: %1")
                    .arg(_device) + ENO);
            continue;
        }

        buffer.append(pkt_buf, len);
        len = buffer.size();

        if (len < static_cast<int>(TSPacket::kSize))
            continue;

        if (!_listener_lock.tryLock())
            continue;

        if (_stream_data_list.empty())
        {
            LOG(VB_GENERAL, LOG_ERR, LOC +
                QString("run() -- _stream_data_list is empty, %1 buffered")
                .arg(buffer.size()));
            _listener_lock.unlock();
            continue;
        }

        StreamDataList::const_iterator sit = _stream_data_list.begin();
        for (; sit != _stream_data_list.end(); ++sit)
            remainder = sit.key()->ProcessData
                        (reinterpret_cast<const uint8_t *>
                         (buffer.constData()), len);

        _listener_lock.unlock();

        if (remainder > 0 && (len > remainder)) // leftover bytes
            buffer.remove(0, len - remainder);
        else
            buffer.clear();
    }

    QString tmp(_error);
    LOG(VB_GENERAL, LOG_WARNING, LOC +
        QString("_running_desired(%1)  _error(%2)")
                .arg(_running_desired).arg(tmp));

    LOG(VB_RECORD, LOG_INFO, LOC + "run() -- finishing up");
    StopEncoding();

    delete[] pkt_buf;

    SetRunning(false, true, false);
    RunEpilog();

    LOG(VB_RECORD, LOG_INFO, LOC + "run() -- end");
}