コード例 #1
0
ファイル: can_2.cpp プロジェクト: Alex0704t/xpcc
// ----------------------------------------------------------------------------
// Configure the mailbox to send a CAN message.
// Low level function called by sendMessage and by Tx Interrupt.
static void
sendMailbox(const xpcc::can::Message& message, uint32_t mailboxId)
{
	CAN_TxMailBox_TypeDef* mailbox = &CAN2->sTxMailBox[mailboxId];
	
	if (message.isExtended()) {
		mailbox->TIR = message.identifier << 3 | CAN_TI0R_IDE;
	}
	else {
		mailbox->TIR = message.identifier << 21;
	}
	
	if (message.isRemoteTransmitRequest()) {
		mailbox->TIR |= CAN_TI0R_RTR;
	}
	
	// Set up the DLC
	mailbox->TDTR = message.getLength();
	
	// Set up the data field (copy the 8x8-bits into two 32-bit registers)
	const uint8_t * ATTRIBUTE_MAY_ALIAS data = message.data;
	mailbox->TDLR = reinterpret_cast<const uint32_t *>(data)[0];
	mailbox->TDHR = reinterpret_cast<const uint32_t *>(data)[1];
	
	// Request transmission
	mailbox->TIR |= CAN_TI0R_TXRQ;
}
コード例 #2
0
ファイル: main.cpp プロジェクト: Alex0704t/xpcc
// ----------------------------------------------------------------------------
static void
displayMessage(const xpcc::can::Message& message)
{
    static uint32_t receiveCounter = 0;
    receiveCounter++;

    display.clear();
    display.setFont(xpcc::font::Assertion);
    display << "  CAN Demo";
    display.drawLine(0, 13, 102, 13);

    display.setCursor(0, 16);
    display.setFont(xpcc::font::FixedWidth5x8);

    display.printf("id  =%lx\n", message.getIdentifier());
    if (message.isExtended()) {
        display << " extended";
    }
    else {
        display << " standard";
    }
    if (message.isRemoteTransmitRequest()) {
        display << ", rtr";
    }
    display << xpcc::endl;

    display << "dlc =" << message.getLength() << xpcc::endl;
    if (!message.isRemoteTransmitRequest())
    {
        display << "data=";
        uint8_t x = display.getCursor().getX();
        for (uint32_t i = 0; i < message.getLength(); ++i) {
            if (i == 4) {
                // wrap around to the next line
                display << xpcc::endl;
                display.setCursorX(x);
            }

            display << xpcc::hex << message.data[i] << xpcc::ascii << ' ';
        }
        display << xpcc::endl;
    }
    display << "# received=" << receiveCounter;
    display.update();
}
コード例 #3
0
/* Low level function:
 * Use a Message Object to send a message */
static void
sendMessageObject(const xpcc::can::Message & message, uint8_t messageObjectId)
{
	// NXP's data structure for sending CAN messages
	CAN_MSG_OBJ msg_obj;

	// Which Message Object to use, valid numbers are 0 to 31.
	// In this class 16 to 31 are used.
	msg_obj.msgobj  = messageObjectId;

	// Mode and Identifier
	msg_obj.mode_id = message.identifier | CAN_MSGOBJ_STD;

	if (message.isExtended()) {
		msg_obj.mode_id |= CAN_MSGOBJ_EXT;
	}

	if (message.isRemoteTransmitRequest()) {
		msg_obj.mode_id |= CAN_MSGOBJ_RTR;
	}

	// Mask unused for transmission
	msg_obj.mask    = 0x0;

	// Set up the DLC
	msg_obj.dlc     = message.getLength();

	// Copy the data.
	// TODO reinterpret_cast or memcpy
	for (uint8_t ii = 0; ii < msg_obj.dlc; ++ii) {
		msg_obj.data[ii] = message.data[ii];
	}

	// Really send the message
	(*xpcc::lpc::Can::rom)->pCAND->can_transmit(&msg_obj);
}