//===========================================================================
// returns qtrue if the bot is against a ladder
//
// Parameter: -
// Returns: -
// Changes Globals: -
//===========================================================================
int AAS_AgainstLadder(vec3_t origin)
{
int areanum, i, facenum, side;
vec3_t org;
aas_plane_t *plane;
aas_face_t *face;
aas_area_t *area;
VectorCopy(origin, org);
areanum = AAS_PointAreaNum(org);
if (!areanum)
{
org[0] += 1;
areanum = AAS_PointAreaNum(org);
if (!areanum)
{
org[1] += 1;
areanum = AAS_PointAreaNum(org);
if (!areanum)
{
org[0] -= 2;
areanum = AAS_PointAreaNum(org);
if (!areanum)
{
org[1] -= 2;
areanum = AAS_PointAreaNum(org);
} //end if
} //end if
} //end if
} //end if
//if in solid... wrrr shouldn't happen
if (!areanum) return qfalse;
//if not in a ladder area
if (!(aasworld.areasettings[areanum].areaflags & AREA_LADDER)) return qfalse;
//if a crouch only area
if (!(aasworld.areasettings[areanum].presencetype & PRESENCE_NORMAL)) return qfalse;
//
area = &aasworld.areas[areanum];
for (i = 0; i < area->numfaces; i++)
{
facenum = aasworld.faceindex[area->firstface + i];
side = facenum < 0;
face = &aasworld.faces[abs(facenum)];
//if the face isn't a ladder face
if (!(face->faceflags & FACE_LADDER)) continue;
//get the plane the face is in
plane = &aasworld.planes[face->planenum ^ side];
//if the origin is pretty close to the plane
if (fabsf(DotProduct(plane->normal, origin) - plane->dist) < 3)
{
if (AAS_PointInsideFace(abs(facenum), origin, 0.1f)) return qtrue;
} //end if
} //end for
return qfalse;
} //end of the function AAS_AgainstLadder
//===========================================================================
//
// Parameter: -
// Returns: -
// Changes Globals: -
//===========================================================================
void BotInitInfoEntities( void ) {
char classname[MAX_EPAIRKEY];
maplocation_t *ml;
campspot_t *cs;
int ent, numlocations, numcampspots;
BotFreeInfoEntities();
//
numlocations = 0;
numcampspots = 0;
for ( ent = AAS_NextBSPEntity( 0 ); ent; ent = AAS_NextBSPEntity( ent ) )
{
if ( !AAS_ValueForBSPEpairKey( ent, "classname", classname, MAX_EPAIRKEY ) ) {
continue;
}
//map locations
if ( !strcmp( classname, "target_location" ) ) {
ml = (maplocation_t *) GetClearedMemory( sizeof( maplocation_t ) );
AAS_VectorForBSPEpairKey( ent, "origin", ml->origin );
AAS_ValueForBSPEpairKey( ent, "message", ml->name, sizeof( ml->name ) );
ml->areanum = AAS_PointAreaNum( ml->origin );
ml->next = maplocations;
maplocations = ml;
numlocations++;
} //end if
//camp spots
else if ( !strcmp( classname, "info_camp" ) ) {
cs = (campspot_t *) GetClearedMemory( sizeof( campspot_t ) );
AAS_VectorForBSPEpairKey( ent, "origin", cs->origin );
//cs->origin[2] += 16;
AAS_ValueForBSPEpairKey( ent, "message", cs->name, sizeof( cs->name ) );
AAS_FloatForBSPEpairKey( ent, "range", &cs->range );
AAS_FloatForBSPEpairKey( ent, "weight", &cs->weight );
AAS_FloatForBSPEpairKey( ent, "wait", &cs->wait );
AAS_FloatForBSPEpairKey( ent, "random", &cs->random );
cs->areanum = AAS_PointAreaNum( cs->origin );
if ( !cs->areanum ) {
botimport.Print( PRT_MESSAGE, "camp spot at %1.1f %1.1f %1.1f in solid\n", cs->origin[0], cs->origin[1], cs->origin[2] );
FreeMemory( cs );
continue;
} //end if
cs->next = campspots;
campspots = cs;
//AAS_DrawPermanentCross(cs->origin, 4, LINECOLOR_YELLOW);
numcampspots++;
} //end else if
} //end for
if ( bot_developer ) {
botimport.Print( PRT_MESSAGE, "%d map locations\n", numlocations );
botimport.Print( PRT_MESSAGE, "%d camp spots\n", numcampspots );
} //end if
} //end of the function BotInitInfoEntities
void AAS_FloodAreas(vector3 *origin) {
int areanum, cluster, *done;
done = (int *) GetClearedMemory(aasworld.numareas * sizeof(int));
areanum = AAS_PointAreaNum(origin);
cluster = AAS_AreaCluster(areanum);
AAS_FloodAreas_r(areanum, cluster, done);
}
static void BotInitInfoEntities() {
BotFreeInfoEntities();
int numlocations = 0;
int numcampspots = 0;
for ( int ent = AAS_NextBSPEntity( 0 ); ent; ent = AAS_NextBSPEntity( ent ) ) {
char classname[ MAX_EPAIRKEY ];
if ( !AAS_ValueForBSPEpairKey( ent, "classname", classname, MAX_EPAIRKEY ) ) {
continue;
}
//map locations
if ( !String::Cmp( classname, "target_location" ) ) {
maplocation_t* ml = ( maplocation_t* )Mem_ClearedAlloc( sizeof ( maplocation_t ) );
AAS_VectorForBSPEpairKey( ent, "origin", ml->origin );
AAS_ValueForBSPEpairKey( ent, "message", ml->name, sizeof ( ml->name ) );
ml->areanum = AAS_PointAreaNum( ml->origin );
ml->next = maplocations;
maplocations = ml;
numlocations++;
}
//camp spots
else if ( !String::Cmp( classname, "info_camp" ) ) {
campspot_t* cs = ( campspot_t* )Mem_ClearedAlloc( sizeof ( campspot_t ) );
AAS_VectorForBSPEpairKey( ent, "origin", cs->origin );
AAS_ValueForBSPEpairKey( ent, "message", cs->name, sizeof ( cs->name ) );
AAS_FloatForBSPEpairKey( ent, "range", &cs->range );
AAS_FloatForBSPEpairKey( ent, "weight", &cs->weight );
AAS_FloatForBSPEpairKey( ent, "wait", &cs->wait );
AAS_FloatForBSPEpairKey( ent, "random", &cs->random );
cs->areanum = AAS_PointAreaNum( cs->origin );
if ( !cs->areanum ) {
BotImport_Print( PRT_MESSAGE, "camp spot at %1.1f %1.1f %1.1f in solid\n", cs->origin[ 0 ], cs->origin[ 1 ], cs->origin[ 2 ] );
Mem_Free( cs );
continue;
}
cs->next = campspots;
campspots = cs;
numcampspots++;
}
}
if ( bot_developer ) {
BotImport_Print( PRT_MESSAGE, "%d map locations\n", numlocations );
BotImport_Print( PRT_MESSAGE, "%d camp spots\n", numcampspots );
}
}
//===========================================================================
// returns the presence type at the given point
//
// Parameter: -
// Returns: -
// Changes Globals: -
//===========================================================================
int AAS_PointPresenceType(vec3_t point)
{
int areanum;
if (!aasworld.loaded) return 0;
areanum = AAS_PointAreaNum(point);
if (!areanum) return PRESENCE_NONE;
return aasworld.areasettings[areanum].presencetype;
} //end of the function AAS_PointPresenceType
//===========================================================================
//
// Parameter: -
// Returns: -
// Changes Globals: -
//===========================================================================
int AAS_PointReachabilityAreaIndex( vec3_t origin )
{
int areanum, cluster, i, index;
if (!aasworld.initialized)
return 0;
if ( !origin )
{
index = 0;
for (i = 0; i < aasworld.numclusters; i++)
{
index += aasworld.clusters[i].numreachabilityareas;
} //end for
return index;
} //end if
areanum = AAS_PointAreaNum( origin );
if ( !areanum || !AAS_AreaReachability(areanum) )
return 0;
cluster = aasworld.areasettings[areanum].cluster;
areanum = aasworld.areasettings[areanum].clusterareanum;
if (cluster < 0)
{
cluster = aasworld.portals[-cluster].frontcluster;
areanum = aasworld.portals[-cluster].clusterareanum[0];
} //end if
index = 0;
for (i = 0; i < cluster; i++)
{
index += aasworld.clusters[i].numreachabilityareas;
} //end for
index += areanum;
return index;
} //end of the function AAS_PointReachabilityAreaIndex
int AAS_AlternativeRouteGoals(vec3_t start, vec3_t goal, int travelflags,
aas_altroutegoal_t *altroutegoals, int maxaltroutegoals,
int color)
{
#ifndef ENABLE_ALTROUTING
return 0;
#else
int i, j, startareanum, goalareanum, bestareanum;
int numaltroutegoals, nummidrangeareas;
int starttime, goaltime, goaltraveltime;
float dist, bestdist;
vec3_t mid, dir;
int reachnum, time;
int a1, a2;
/*#ifdef DEBUG
int startmillisecs;
startmillisecs = Sys_MilliSeconds();
#endif*/
startareanum = AAS_PointAreaNum(start);
if (!startareanum)
{
return 0;
}
goalareanum = AAS_PointAreaNum(goal);
if (!goalareanum)
{
VectorCopy(goal, dir);
dir[2] += 30;
goalareanum = AAS_PointAreaNum(dir);
if (!goalareanum)
{
return 0;
}
}
//travel time towards the goal area
goaltraveltime = AAS_AreaTravelTimeToGoalArea(startareanum, start, goalareanum, travelflags);
//clear the midrange areas
memset(midrangeareas, 0, (*aasworld).numareas * sizeof(midrangearea_t));
numaltroutegoals = 0;
//
nummidrangeareas = 0;
//
for (i = 1; i < (*aasworld).numareas; i++)
{
//
if (!((*aasworld).areasettings[i].contents & AREACONTENTS_ROUTEPORTAL) &&
!((*aasworld).areasettings[i].contents & AREACONTENTS_CLUSTERPORTAL))
{
continue;
}
//if the area has no reachabilities
if (!AAS_AreaReachability(i))
{
continue;
}
//tavel time from the area to the start area
starttime = AAS_AreaTravelTimeToGoalArea(startareanum, start, i, travelflags);
if (!starttime)
{
continue;
}
//if the travel time from the start to the area is greater than the shortest goal travel time
if (starttime > 500 + 3.0 * goaltraveltime)
{
continue;
}
//travel time from the area to the goal area
goaltime = AAS_AreaTravelTimeToGoalArea(i, NULL, goalareanum, travelflags);
if (!goaltime)
{
continue;
}
//if the travel time from the area to the goal is greater than the shortest goal travel time
if (goaltime > 500 + 3.0 * goaltraveltime)
{
continue;
}
//this is a mid range area
midrangeareas[i].valid = qtrue;
midrangeareas[i].starttime = starttime;
midrangeareas[i].goaltime = goaltime;
Log_Write("%d midrange area %d", nummidrangeareas, i);
nummidrangeareas++;
} //end for
//
for (i = 1; i < (*aasworld).numareas; i++)
{
if (!midrangeareas[i].valid)
{
continue;
}
//get the areas in one cluster
numclusterareas = 0;
AAS_AltRoutingFloodCluster_r(i);
//now we've got a cluster with areas through which an alternative route could go
//get the 'center' of the cluster
VectorClear(mid);
for (j = 0; j < numclusterareas; j++)
{
VectorAdd(mid, (*aasworld).areas[clusterareas[j]].center, mid);
} //end for
VectorScale(mid, 1.0 / numclusterareas, mid);
//get the area closest to the center of the cluster
bestdist = 999999;
bestareanum = 0;
for (j = 0; j < numclusterareas; j++)
{
VectorSubtract(mid, (*aasworld).areas[clusterareas[j]].center, dir);
dist = VectorLength(dir);
if (dist < bestdist)
{
bestdist = dist;
bestareanum = clusterareas[j];
} //end if
} //end for
// make sure the route to the destination isn't in the same direction as the route to the source
if (!AAS_AreaRouteToGoalArea(bestareanum, (*aasworld).areawaypoints[bestareanum], goalareanum, travelflags, &time, &reachnum))
{
continue;
}
a1 = (*aasworld).reachability[reachnum].areanum;
if (!AAS_AreaRouteToGoalArea(bestareanum, (*aasworld).areawaypoints[bestareanum], startareanum, travelflags, &time, &reachnum))
{
continue;
}
a2 = (*aasworld).reachability[reachnum].areanum;
if (a1 == a2)
{
continue;
}
//now we've got an area for an alternative route
//FIXME: add alternative goal origin
VectorCopy((*aasworld).areawaypoints[bestareanum], altroutegoals[numaltroutegoals].origin);
altroutegoals[numaltroutegoals].areanum = bestareanum;
altroutegoals[numaltroutegoals].starttraveltime = midrangeareas[bestareanum].starttime;
altroutegoals[numaltroutegoals].goaltraveltime = midrangeareas[bestareanum].goaltime;
altroutegoals[numaltroutegoals].extratraveltime =
(midrangeareas[bestareanum].starttime + midrangeareas[bestareanum].goaltime) -
goaltraveltime;
numaltroutegoals++;
//
/*#ifdef DEBUG
botimport.Print(PRT_MESSAGE, "alternative route goal area %d, numclusterareas = %d\n", bestareanum, numclusterareas);
if (color)
{
AAS_DrawPermanentCross((*aasworld).areas[bestareanum].center, 10, color);
} //end if
//AAS_ShowArea(bestarea, qtrue);
#endif*/
//don't return more than the maximum alternative route goals
if (numaltroutegoals >= maxaltroutegoals)
{
break;
}
} //end for
//botimport.Print(PRT_MESSAGE, "%d alternative route goals\n", numaltroutegoals);
#ifdef DEBUG
// botimport.Print(PRT_MESSAGE, "alternative route goals in %d msec\n", Sys_MilliSeconds() - startmillisecs);
#endif
return numaltroutegoals;
#endif
} //end of the function AAS_AlternativeRouteGoals
// predicts the movement
// assumes regular bounding box sizes
// NOTE: out of water jumping is not included
// NOTE: grappling hook is not included
// origin origin to start with
// presencetype presence type to start with
// velocity velocity to start with
// cmdmove client command movement
// cmdframes number of frame cmdmove is valid
// maxframes maximum number of predicted frames
// frametime duration of one predicted frame
// stopevent events that stop the prediction
// stopareanum stop as soon as entered this area
int AAS_ClientMovementPrediction(struct aas_clientmove_s *move,
int entnum, vector3 *origin,
int presencetype, int onground,
vector3 *velocity, vector3 *cmdmove,
int cmdframes,
int maxframes, float frametime,
int stopevent, int stopareanum,
vector3 *mins, vector3 *maxs, int visualize)
{
float phys_friction, phys_stopspeed, phys_gravity, phys_waterfriction;
float phys_watergravity;
float phys_walkaccelerate, phys_airaccelerate, phys_swimaccelerate;
float phys_maxwalkvelocity, phys_maxcrouchvelocity, phys_maxswimvelocity;
float phys_maxstep, phys_maxsteepness, phys_jumpvel, friction;
float gravity, delta, maxvel, wishspeed, accelerate;
//float velchange, newvel;
//int ax;
int n, i, j, pc, step, swimming, crouch, event, jump_frame, areanum;
int areas[20], numareas;
vector3 points[20];
vector3 org, end, feet, start, stepend, lastorg, wishdir;
vector3 frame_test_vel, old_frame_test_vel, left_test_vel;
vector3 up = {0, 0, 1};
aas_plane_t *plane, *plane2;
aas_trace_t trace, steptrace;
if (frametime <= 0) frametime = 0.1f;
//
phys_friction = aassettings.phys_friction;
phys_stopspeed = aassettings.phys_stopspeed;
phys_gravity = aassettings.phys_gravity;
phys_waterfriction = aassettings.phys_waterfriction;
phys_watergravity = aassettings.phys_watergravity;
phys_maxwalkvelocity = aassettings.phys_maxwalkvelocity;// * frametime;
phys_maxcrouchvelocity = aassettings.phys_maxcrouchvelocity;// * frametime;
phys_maxswimvelocity = aassettings.phys_maxswimvelocity;// * frametime;
phys_walkaccelerate = aassettings.phys_walkaccelerate;
phys_airaccelerate = aassettings.phys_airaccelerate;
phys_swimaccelerate = aassettings.phys_swimaccelerate;
phys_maxstep = aassettings.phys_maxstep;
phys_maxsteepness = aassettings.phys_maxsteepness;
phys_jumpvel = aassettings.phys_jumpvel * frametime;
//
memset(move, 0, sizeof(aas_clientmove_t));
memset(&trace, 0, sizeof(aas_trace_t));
//start at the current origin
VectorCopy(origin, &org);
org.z += 0.25f;
//velocity to test for the first frame
VectorScale(velocity, frametime, &frame_test_vel);
//
jump_frame = -1;
//predict a maximum of 'maxframes' ahead
for (n = 0; n < maxframes; n++)
{
swimming = AAS_Swimming(&org);
//get gravity depending on swimming or not
gravity = swimming ? phys_watergravity : phys_gravity;
//apply gravity at the START of the frame
frame_test_vel.z = frame_test_vel.z - (gravity * 0.1f * frametime);
//if on the ground or swimming
if (onground || swimming)
{
friction = swimming ? phys_friction : phys_waterfriction;
//apply friction
VectorScale(&frame_test_vel, 1/frametime, &frame_test_vel);
AAS_ApplyFriction(&frame_test_vel, friction, phys_stopspeed, frametime);
VectorScale(&frame_test_vel, frametime, &frame_test_vel);
}
crouch = qfalse;
//apply command movement
if (n < cmdframes)
{
//ax = 0;
maxvel = phys_maxwalkvelocity;
accelerate = phys_airaccelerate;
VectorCopy(cmdmove, &wishdir);
if (onground)
{
if (cmdmove->z < -300)
{
crouch = qtrue;
maxvel = phys_maxcrouchvelocity;
}
//if not swimming and upmove is positive then jump
if (!swimming && cmdmove->z > 1)
{
//jump velocity minus the gravity for one frame + 5 for safety
frame_test_vel.z = phys_jumpvel - (gravity * 0.1f * frametime) + 5;
jump_frame = n;
//jumping so air accelerate
accelerate = phys_airaccelerate;
}
else
{
accelerate = phys_walkaccelerate;
}
//ax = 2;
}
if (swimming)
{
maxvel = phys_maxswimvelocity;
accelerate = phys_swimaccelerate;
//ax = 3;
}
else
{
wishdir.z = 0;
}
//
wishspeed = VectorNormalize(&wishdir);
if (wishspeed > maxvel) wishspeed = maxvel;
VectorScale(&frame_test_vel, 1/frametime, &frame_test_vel);
AAS_Accelerate(&frame_test_vel, frametime, &wishdir, wishspeed, accelerate);
VectorScale(&frame_test_vel, frametime, &frame_test_vel);
/*
for (i = 0; i < ax; i++)
{
velchange = (cmdmove[i] * frametime) - frame_test_vel[i];
if (velchange > phys_maxacceleration) velchange = phys_maxacceleration;
else if (velchange < -phys_maxacceleration) velchange = -phys_maxacceleration;
newvel = frame_test_vel[i] + velchange;
//
if (frame_test_vel[i] <= maxvel && newvel > maxvel) frame_test_vel[i] = maxvel;
else if (frame_test_vel[i] >= -maxvel && newvel < -maxvel) frame_test_vel[i] = -maxvel;
else frame_test_vel[i] = newvel;
}
*/
}
if (crouch)
{
presencetype = PRESENCE_CROUCH;
}
else if (presencetype == PRESENCE_CROUCH)
{
if (AAS_PointPresenceType(&org) & PRESENCE_NORMAL)
{
presencetype = PRESENCE_NORMAL;
}
}
//save the current origin
VectorCopy(&org, &lastorg);
//move linear during one frame
VectorCopy(&frame_test_vel, &left_test_vel);
j = 0;
do
{
VectorAdd(&org, &left_test_vel, &end);
//trace a bounding box
trace = AAS_TraceClientBBox(&org, &end, presencetype, entnum);
//
//#ifdef AAS_MOVE_DEBUG
if (visualize)
{
if (trace.startsolid) botimport.Print(PRT_MESSAGE, "PredictMovement: start solid\n");
AAS_DebugLine(&org, &trace.endpos, LINECOLOR_RED);
}
//#endif //AAS_MOVE_DEBUG
//
if (stopevent & (SE_ENTERAREA|SE_TOUCHJUMPPAD|SE_TOUCHTELEPORTER|SE_TOUCHCLUSTERPORTAL))
{
numareas = AAS_TraceAreas(&org, &trace.endpos, areas, points, 20);
for (i = 0; i < numareas; i++)
{
if (stopevent & SE_ENTERAREA)
{
if (areas[i] == stopareanum)
{
VectorCopy(&points[i], &move->endpos);
VectorScale(&frame_test_vel, 1.0f/frametime, &move->velocity);
move->endarea = areas[i];
move->trace = trace;
move->stopevent = SE_ENTERAREA;
move->presencetype = presencetype;
move->endcontents = 0;
move->time = n * frametime;
move->frames = n;
return qtrue;
}
}
//NOTE: if not the first frame
if ((stopevent & SE_TOUCHJUMPPAD) && n)
{
if (aasworld.areasettings[areas[i]].contents & AREACONTENTS_JUMPPAD)
{
VectorCopy(&points[i], &move->endpos);
VectorScale(&frame_test_vel, 1.0f/frametime, &move->velocity);
move->endarea = areas[i];
move->trace = trace;
move->stopevent = SE_TOUCHJUMPPAD;
move->presencetype = presencetype;
move->endcontents = 0;
move->time = n * frametime;
move->frames = n;
return qtrue;
}
}
if (stopevent & SE_TOUCHTELEPORTER)
{
if (aasworld.areasettings[areas[i]].contents & AREACONTENTS_TELEPORTER)
{
VectorCopy(&points[i], &move->endpos);
move->endarea = areas[i];
VectorScale(&frame_test_vel, 1.0f/frametime, &move->velocity);
move->trace = trace;
move->stopevent = SE_TOUCHTELEPORTER;
move->presencetype = presencetype;
move->endcontents = 0;
move->time = n * frametime;
move->frames = n;
return qtrue;
}
}
if (stopevent & SE_TOUCHCLUSTERPORTAL)
{
if (aasworld.areasettings[areas[i]].contents & AREACONTENTS_CLUSTERPORTAL)
{
VectorCopy(&points[i], &move->endpos);
move->endarea = areas[i];
VectorScale(&frame_test_vel, 1.0f/frametime, &move->velocity);
move->trace = trace;
move->stopevent = SE_TOUCHCLUSTERPORTAL;
move->presencetype = presencetype;
move->endcontents = 0;
move->time = n * frametime;
move->frames = n;
return qtrue;
}
}
}
}
//
if (stopevent & SE_HITBOUNDINGBOX)
{
if (AAS_ClipToBBox(&trace, &org, &trace.endpos, presencetype, mins, maxs))
{
VectorCopy(&trace.endpos, &move->endpos);
move->endarea = AAS_PointAreaNum(&move->endpos);
VectorScale(&frame_test_vel, 1.0f/frametime, &move->velocity);
move->trace = trace;
move->stopevent = SE_HITBOUNDINGBOX;
move->presencetype = presencetype;
move->endcontents = 0;
move->time = n * frametime;
move->frames = n;
return qtrue;
}
}
//move the entity to the trace end point
VectorCopy(&trace.endpos, &org);
//if there was a collision
if (trace.fraction < 1.0f)
{
//get the plane the bounding box collided with
plane = AAS_PlaneFromNum(trace.planenum);
//
if (stopevent & SE_HITGROUNDAREA)
{
if (DotProduct(&plane->normal, &up) > phys_maxsteepness)
{
VectorCopy(&org, &start);
start.z += 0.5f;
if (AAS_PointAreaNum(&start) == stopareanum)
{
VectorCopy(&start, &move->endpos);
move->endarea = stopareanum;
VectorScale(&frame_test_vel, 1.0f/frametime, &move->velocity);
move->trace = trace;
move->stopevent = SE_HITGROUNDAREA;
move->presencetype = presencetype;
move->endcontents = 0;
move->time = n * frametime;
move->frames = n;
return qtrue;
}
}
}
//assume there's no step
step = qfalse;
//if it is a vertical plane and the bot didn't jump recently
if (plane->normal.z == 0 && (jump_frame < 0 || n - jump_frame > 2))
{
//check for a step
VectorMA(&org, -0.25f, &plane->normal, &start);
VectorCopy(&start, &stepend);
start.z += phys_maxstep;
steptrace = AAS_TraceClientBBox(&start, &stepend, presencetype, entnum);
//
if (!steptrace.startsolid)
{
plane2 = AAS_PlaneFromNum(steptrace.planenum);
if (DotProduct(&plane2->normal, &up) > phys_maxsteepness)
{
VectorSubtract(&end, &steptrace.endpos, &left_test_vel);
left_test_vel.z = 0;
frame_test_vel.z = 0;
//#ifdef AAS_MOVE_DEBUG
if (visualize)
{
if (steptrace.endpos.z - org.z > 0.125f)
{
VectorCopy(&org, &start);
start.z = steptrace.endpos.z;
AAS_DebugLine(&org, &start, LINECOLOR_BLUE);
}
}
//#endif //AAS_MOVE_DEBUG
org.z = steptrace.endpos.z;
step = qtrue;
}
}
}
//
if (!step)
{
//velocity left to test for this frame is the projection
//of the current test velocity into the hit plane
VectorMA(&left_test_vel, -DotProduct(&left_test_vel, &plane->normal), &plane->normal, &left_test_vel);
//store the old velocity for landing check
VectorCopy(&frame_test_vel, &old_frame_test_vel);
//test velocity for the next frame is the projection
//of the velocity of the current frame into the hit plane
VectorMA(&frame_test_vel, -DotProduct(&frame_test_vel, &plane->normal), &plane->normal, &frame_test_vel);
//check for a landing on an almost horizontal floor
if (DotProduct(&plane->normal, &up) > phys_maxsteepness)
{
onground = qtrue;
}
if (stopevent & SE_HITGROUNDDAMAGE)
{
delta = 0;
if (old_frame_test_vel.z < 0 &&
frame_test_vel.z > old_frame_test_vel.z &&
!onground)
{
delta = old_frame_test_vel.z;
}
else if (onground)
{
delta = frame_test_vel.z - old_frame_test_vel.z;
}
if (delta)
{
delta = delta * 10;
delta = delta * delta * 0.0001f;
if (swimming) delta = 0;
// never take falling damage if completely underwater
/*
if (ent->waterlevel == 3) return;
if (ent->waterlevel == 2) delta *= 0.25f;
if (ent->waterlevel == 1) delta *= 0.5f;
*/
if (delta > 40)
{
VectorCopy(&org, &move->endpos);
move->endarea = AAS_PointAreaNum(&org);
VectorCopy(&frame_test_vel, &move->velocity);
move->trace = trace;
move->stopevent = SE_HITGROUNDDAMAGE;
move->presencetype = presencetype;
move->endcontents = 0;
move->time = n * frametime;
move->frames = n;
return qtrue;
}
}
}
}
}
//extra check to prevent endless loop
if (++j > 20) return qfalse;
//while there is a plane hit
} while(trace.fraction < 1.0f);
//if going down
if (frame_test_vel.z <= 10)
{
//check for a liquid at the feet of the bot
VectorCopy(&org, &feet);
feet.z -= 22;
pc = AAS_PointContents(&feet);
//get event from pc
event = SE_NONE;
if (pc & CONTENTS_LAVA) event |= SE_ENTERLAVA;
if (pc & CONTENTS_SLIME) event |= SE_ENTERSLIME;
if (pc & CONTENTS_WATER) event |= SE_ENTERWATER;
//
areanum = AAS_PointAreaNum(&org);
if (aasworld.areasettings[areanum].contents & AREACONTENTS_LAVA)
event |= SE_ENTERLAVA;
if (aasworld.areasettings[areanum].contents & AREACONTENTS_SLIME)
event |= SE_ENTERSLIME;
if (aasworld.areasettings[areanum].contents & AREACONTENTS_WATER)
event |= SE_ENTERWATER;
//if in lava or slime
if (event & stopevent)
{
VectorCopy(&org, &move->endpos);
move->endarea = areanum;
VectorScale(&frame_test_vel, 1.0f/frametime, &move->velocity);
move->stopevent = event & stopevent;
move->presencetype = presencetype;
move->endcontents = pc;
move->time = n * frametime;
move->frames = n;
return qtrue;
}
}
//
onground = AAS_OnGround(&org, presencetype, entnum);
//if onground and on the ground for at least one whole frame
if (onground)
{
if (stopevent & SE_HITGROUND)
{
VectorCopy(&org, &move->endpos);
move->endarea = AAS_PointAreaNum(&org);
VectorScale(&frame_test_vel, 1.0f/frametime, &move->velocity);
move->trace = trace;
move->stopevent = SE_HITGROUND;
move->presencetype = presencetype;
move->endcontents = 0;
move->time = n * frametime;
move->frames = n;
return qtrue;
}
}
else if (stopevent & SE_LEAVEGROUND)
{
VectorCopy(&org, &move->endpos);
move->endarea = AAS_PointAreaNum(&org);
VectorScale(&frame_test_vel, 1/frametime, &move->velocity);
move->trace = trace;
move->stopevent = SE_LEAVEGROUND;
move->presencetype = presencetype;
move->endcontents = 0;
move->time = n * frametime;
move->frames = n;
return qtrue;
}
else if (stopevent & SE_GAP)
{
aas_trace_t gaptrace;
VectorCopy(&org, &start);
VectorCopy(&start, &end);
end.z -= 48 + aassettings.phys_maxbarrier;
gaptrace = AAS_TraceClientBBox(&start, &end, PRESENCE_CROUCH, -1);
//if solid is found the bot cannot walk any further and will not fall into a gap
if (!gaptrace.startsolid)
{
//if it is a gap (lower than one step height)
if (gaptrace.endpos.z < org.z - aassettings.phys_maxstep - 1)
{
if (!(AAS_PointContents(&end) & CONTENTS_WATER))
{
VectorCopy(&lastorg, &move->endpos);
move->endarea = AAS_PointAreaNum(&lastorg);
VectorScale(&frame_test_vel, 1.0f/frametime, &move->velocity);
move->trace = trace;
move->stopevent = SE_GAP;
move->presencetype = presencetype;
move->endcontents = 0;
move->time = n * frametime;
move->frames = n;
return qtrue;
}
}
}
}
}
//
VectorCopy(&org, &move->endpos);
move->endarea = AAS_PointAreaNum(&org);
VectorScale(&frame_test_vel, 1.0f/frametime, &move->velocity);
move->stopevent = SE_NONE;
move->presencetype = presencetype;
move->endcontents = 0;
move->time = n * frametime;
move->frames = n;
//
return qtrue;
}
int BotExportTest( int parm0, char *parm1, vec3_t parm2, vec3_t parm3 ) {
#if !defined RTCW_ET
// return AAS_PointLight(parm2, NULL, NULL, NULL);
#ifdef DEBUG
static int area = -1;
static int line[2];
#if defined RTCW_SP
int newarea, i, highlightarea, bot_testhidepos, hideposarea, bot_testroutevispos;
#elif defined RTCW_MP
int newarea, i, highlightarea, bot_testhidepos, hideposarea;
#endif // RTCW_XX
// int reachnum;
vec3_t eye, forward, right, end, origin;
// vec3_t bottomcenter;
// aas_trace_t trace;
// aas_face_t *face;
// aas_entity_t *ent;
// bsp_trace_t bsptrace;
// aas_reachability_t reach;
// bot_goal_t goal;
// clock_t start_time, end_time;
vec3_t mins = {-16, -16, -24};
vec3_t maxs = {16, 16, 32};
// int areas[10], numareas;
//return 0;
if ( !( *aasworld ).loaded ) {
return 0;
}
AAS_SetCurrentWorld( 0 );
for ( i = 0; i < 2; i++ ) if ( !line[i] ) {
line[i] = botimport.DebugLineCreate();
}
// AAS_ClearShownDebugLines();
bot_testhidepos = LibVarGetValue( "bot_testhidepos" );
if ( bot_testhidepos ) {
VectorCopy( parm2, origin );
newarea = BotFuzzyPointReachabilityArea( origin );
if ( parm0 & 1 ) {
botlibglobals.goalareanum = newarea;
VectorCopy( origin, botlibglobals.goalorigin );
botimport.Print( PRT_MESSAGE, "new enemy position %2.1f %2.1f %2.1f area %d\n",
origin[0], origin[1], origin[2], newarea );
} //end if
AAS_ClearShownPolygons();
AAS_ClearShownDebugLines();
#if defined RTCW_SP
hideposarea = AAS_NearestHideArea( -1, origin, AAS_PointAreaNum( origin ), 0,
#elif defined RTCW_MP
hideposarea = AAS_NearestHideArea( 0, origin, AAS_PointAreaNum( origin ), 0,
#endif // RTCW_XX
botlibglobals.goalorigin, botlibglobals.goalareanum, TFL_DEFAULT );
#if defined RTCW_SP
if ( bot_testhidepos > 1 ) {
if ( hideposarea ) {
botimport.Print( PRT_MESSAGE, "hidepos (%i) %2.1f %2.1f %2.1f\n",
hideposarea,
( *aasworld ).areawaypoints[hideposarea][0],
( *aasworld ).areawaypoints[hideposarea][1],
( *aasworld ).areawaypoints[hideposarea][2] );
} else {
botimport.Print( PRT_MESSAGE, "no hidepos found\n" );
}
}
#endif // RTCW_XX
//area we are currently in
AAS_ShowAreaPolygons( newarea, 1, qtrue );
//enemy position
AAS_ShowAreaPolygons( botlibglobals.goalareanum, 2, qtrue );
//area we should go hide
AAS_ShowAreaPolygons( hideposarea, 4, qtrue );
return 0;
}
#if defined RTCW_SP
bot_testroutevispos = LibVarGetValue( "bot_testroutevispos" );
if ( bot_testroutevispos ) {
VectorCopy( parm2, origin );
newarea = BotFuzzyPointReachabilityArea( origin );
if ( parm0 & 1 ) {
botlibglobals.goalareanum = newarea;
VectorCopy( origin, botlibglobals.goalorigin );
botimport.Print( PRT_MESSAGE, "new enemy position %2.1f %2.1f %2.1f area %d\n",
origin[0], origin[1], origin[2], newarea );
} //end if
AAS_ClearShownPolygons();
AAS_ClearShownDebugLines();
AAS_GetRouteFirstVisPos( botlibglobals.goalorigin, origin, TFL_DEFAULT, eye );
//area we are currently in
AAS_ShowAreaPolygons( newarea, 1, qtrue );
//enemy position
AAS_ShowAreaPolygons( botlibglobals.goalareanum, 2, qtrue );
//area that is visible in path from enemy pos
hideposarea = BotFuzzyPointReachabilityArea( eye );
AAS_ShowAreaPolygons( hideposarea, 4, qtrue );
return 0;
}
#endif // RTCW_XX
//if (AAS_AgainstLadder(parm2)) botimport.Print(PRT_MESSAGE, "against ladder\n");
//BotOnGround(parm2, PRESENCE_NORMAL, 1, &newarea, &newarea);
//botimport.Print(PRT_MESSAGE, "%f %f %f\n", parm2[0], parm2[1], parm2[2]);
//*
highlightarea = LibVarGetValue( "bot_highlightarea" );
if ( highlightarea > 0 ) {
newarea = highlightarea;
} //end if
else
{
VectorCopy( parm2, origin );
origin[2] += 0.5;
//newarea = AAS_PointAreaNum(origin);
newarea = BotFuzzyPointReachabilityArea( origin );
} //end else
botimport.Print( PRT_MESSAGE, "\rtravel time to goal (%d) = %d ", botlibglobals.goalareanum,
AAS_AreaTravelTimeToGoalArea( newarea, origin, botlibglobals.goalareanum, TFL_DEFAULT ) );
//newarea = BotReachabilityArea(origin, qtrue);
if ( newarea != area ) {
botimport.Print( PRT_MESSAGE, "origin = %f, %f, %f\n", origin[0], origin[1], origin[2] );
area = newarea;
botimport.Print( PRT_MESSAGE, "new area %d, cluster %d, presence type %d\n",
area, AAS_AreaCluster( area ), AAS_PointPresenceType( origin ) );
if ( ( *aasworld ).areasettings[area].areaflags & AREA_LIQUID ) {
botimport.Print( PRT_MESSAGE, "liquid area\n" );
} //end if
botimport.Print( PRT_MESSAGE, "area contents: " );
if ( ( *aasworld ).areasettings[area].contents & AREACONTENTS_WATER ) {
botimport.Print( PRT_MESSAGE, "water " );
} //end if
if ( ( *aasworld ).areasettings[area].contents & AREACONTENTS_LAVA ) {
botimport.Print( PRT_MESSAGE, "lava " );
} //end if
if ( ( *aasworld ).areasettings[area].contents & AREACONTENTS_SLIME ) {
// botimport.Print(PRT_MESSAGE, "slime ");
botimport.Print( PRT_MESSAGE, "slag " );
} //end if
if ( ( *aasworld ).areasettings[area].contents & AREACONTENTS_JUMPPAD ) {
botimport.Print( PRT_MESSAGE, "jump pad " );
} //end if
if ( ( *aasworld ).areasettings[area].contents & AREACONTENTS_CLUSTERPORTAL ) {
botimport.Print( PRT_MESSAGE, "cluster portal " );
} //end if
if ( ( *aasworld ).areasettings[area].contents & AREACONTENTS_DONOTENTER ) {
botimport.Print( PRT_MESSAGE, "do not enter " );
} //end if
if ( ( *aasworld ).areasettings[area].contents & AREACONTENTS_DONOTENTER_LARGE ) {
botimport.Print( PRT_MESSAGE, "do not enter large " );
} //end if
if ( !( *aasworld ).areasettings[area].contents ) {
botimport.Print( PRT_MESSAGE, "empty " );
} //end if
if ( ( *aasworld ).areasettings[area].areaflags & AREA_DISABLED ) {
botimport.Print( PRT_MESSAGE, "DISABLED" );
} //end if
botimport.Print( PRT_MESSAGE, "\n" );
botimport.Print( PRT_MESSAGE, "travel time to goal (%d) = %d\n", botlibglobals.goalareanum,
AAS_AreaTravelTimeToGoalArea( newarea, origin, botlibglobals.goalareanum, TFL_DEFAULT | TFL_ROCKETJUMP ) );
/*
VectorCopy(origin, end);
end[2] += 5;
numareas = AAS_TraceAreas(origin, end, areas, NULL, 10);
AAS_TraceClientBBox(origin, end, PRESENCE_CROUCH, -1);
botimport.Print(PRT_MESSAGE, "num areas = %d, area = %d\n", numareas, areas[0]);
*/
/*
botlibglobals.goalareanum = newarea;
VectorCopy(parm2, botlibglobals.goalorigin);
botimport.Print(PRT_MESSAGE, "new goal %2.1f %2.1f %2.1f area %d\n",
origin[0], origin[1], origin[2], newarea);
*/
} //end if
//*
if ( parm0 & 1 ) {
botlibglobals.goalareanum = newarea;
VectorCopy( parm2, botlibglobals.goalorigin );
botimport.Print( PRT_MESSAGE, "new goal %2.1f %2.1f %2.1f area %d\n",
origin[0], origin[1], origin[2], newarea );
} //end if*/
// if (parm0 & BUTTON_USE)
// {
// botlibglobals.runai = !botlibglobals.runai;
// if (botlibglobals.runai) botimport.Print(PRT_MESSAGE, "started AI\n");
// else botimport.Print(PRT_MESSAGE, "stopped AI\n");
//* /
/*
goal.areanum = botlibglobals.goalareanum;
reachnum = BotGetReachabilityToGoal(parm2, newarea, 1,
ms.avoidreach, ms.avoidreachtimes,
&goal, TFL_DEFAULT);
if (!reachnum)
{
botimport.Print(PRT_MESSAGE, "goal not reachable\n");
} //end if
else
{
AAS_ReachabilityFromNum(reachnum, &reach);
AAS_ClearShownDebugLines();
AAS_ShowArea(area, qtrue);
AAS_ShowArea(reach.areanum, qtrue);
AAS_DrawCross(reach.start, 6, LINECOLOR_BLUE);
AAS_DrawCross(reach.end, 6, LINECOLOR_RED);
//
if (reach.traveltype == TRAVEL_ELEVATOR)
{
ElevatorBottomCenter(&reach, bottomcenter);
AAS_DrawCross(bottomcenter, 10, LINECOLOR_GREEN);
} //end if
} //end else*/
// botimport.Print(PRT_MESSAGE, "travel time to goal = %d\n",
// AAS_AreaTravelTimeToGoalArea(area, origin, botlibglobals.goalareanum, TFL_DEFAULT));
// botimport.Print(PRT_MESSAGE, "test rj from 703 to 716\n");
// AAS_Reachability_WeaponJump(703, 716);
// } //end if*/
/* face = AAS_AreaGroundFace(newarea, parm2);
if (face)
{
AAS_ShowFace(face - (*aasworld).faces);
} //end if*/
/*
AAS_ClearShownDebugLines();
AAS_ShowArea(newarea, parm0 & BUTTON_USE);
AAS_ShowReachableAreas(area);
*/
AAS_ClearShownPolygons();
AAS_ClearShownDebugLines();
AAS_ShowAreaPolygons( newarea, 1, parm0 & 4 );
if ( parm0 & 2 ) {
AAS_ShowReachableAreas( area );
} else
{
static int lastgoalareanum, lastareanum;
static int avoidreach[MAX_AVOIDREACH];
static float avoidreachtimes[MAX_AVOIDREACH];
static int avoidreachtries[MAX_AVOIDREACH];
int reachnum;
bot_goal_t goal;
aas_reachability_t reach;
goal.areanum = botlibglobals.goalareanum;
VectorCopy( botlibglobals.goalorigin, goal.origin );
reachnum = BotGetReachabilityToGoal( origin, newarea, -1,
lastgoalareanum, lastareanum,
avoidreach, avoidreachtimes, avoidreachtries,
&goal, TFL_DEFAULT | TFL_FUNCBOB, TFL_DEFAULT | TFL_FUNCBOB );
AAS_ReachabilityFromNum( reachnum, &reach );
AAS_ShowReachability( &reach );
} //end else
VectorClear( forward );
//BotGapDistance(origin, forward, 0);
/*
if (parm0 & BUTTON_USE)
{
botimport.Print(PRT_MESSAGE, "test rj from 703 to 716\n");
AAS_Reachability_WeaponJump(703, 716);
} //end if*/
AngleVectors( parm3, forward, right, NULL );
//get the eye 16 units to the right of the origin
VectorMA( parm2, 8, right, eye );
//get the eye 24 units up
eye[2] += 24;
//get the end point for the line to be traced
VectorMA( eye, 800, forward, end );
// AAS_TestMovementPrediction(1, parm2, forward);
/* //trace the line to find the hit point
trace = AAS_TraceClientBBox(eye, end, PRESENCE_NORMAL, 1);
if (!line[0]) line[0] = botimport.DebugLineCreate();
botimport.DebugLineShow(line[0], eye, trace.endpos, LINECOLOR_BLUE);
//
AAS_ClearShownDebugLines();
if (trace.ent)
{
ent = &(*aasworld).entities[trace.ent];
AAS_ShowBoundingBox(ent->origin, ent->mins, ent->maxs);
} //end if*/
/*
start_time = clock();
for (i = 0; i < 2000; i++)
{
AAS_Trace2(eye, mins, maxs, end, 1, MASK_PLAYERSOLID);
// AAS_TraceClientBBox(eye, end, PRESENCE_NORMAL, 1);
} //end for
end_time = clock();
botimport.Print(PRT_MESSAGE, "me %lu clocks, %lu CLOCKS_PER_SEC\n", end_time - start_time, CLOCKS_PER_SEC);
start_time = clock();
for (i = 0; i < 2000; i++)
{
AAS_Trace(eye, mins, maxs, end, 1, MASK_PLAYERSOLID);
} //end for
end_time = clock();
botimport.Print(PRT_MESSAGE, "id %lu clocks, %lu CLOCKS_PER_SEC\n", end_time - start_time, CLOCKS_PER_SEC);
*/
/*
AAS_ClearShownDebugLines();
//bsptrace = AAS_Trace(eye, NULL, NULL, end, 1, MASK_PLAYERSOLID);
bsptrace = AAS_Trace(eye, mins, maxs, end, 1, MASK_PLAYERSOLID);
if (!line[0]) line[0] = botimport.DebugLineCreate();
botimport.DebugLineShow(line[0], eye, bsptrace.endpos, LINECOLOR_YELLOW);
if (bsptrace.fraction < 1.0)
{
face = AAS_TraceEndFace(&trace);
if (face)
{
AAS_ShowFace(face - (*aasworld).faces);
} //end if
AAS_DrawPlaneCross(bsptrace.endpos,
bsptrace.plane.normal,
bsptrace.plane.dist + bsptrace.exp_dist,
bsptrace.plane.type, LINECOLOR_GREEN);
if (trace.ent)
{
ent = &(*aasworld).entities[trace.ent];
AAS_ShowBoundingBox(ent->origin, ent->mins, ent->maxs);
} //end if
} //end if*/
/*/
//bsptrace = AAS_Trace2(eye, NULL, NULL, end, 1, MASK_PLAYERSOLID);
bsptrace = AAS_Trace2(eye, mins, maxs, end, 1, MASK_PLAYERSOLID);
botimport.DebugLineShow(line[1], eye, bsptrace.endpos, LINECOLOR_BLUE);
if (bsptrace.fraction < 1.0)
{
AAS_DrawPlaneCross(bsptrace.endpos,
bsptrace.plane.normal,
bsptrace.plane.dist,// + bsptrace.exp_dist,
bsptrace.plane.type, LINECOLOR_RED);
if (bsptrace.ent)
{
ent = &(*aasworld).entities[bsptrace.ent];
AAS_ShowBoundingBox(ent->origin, ent->mins, ent->maxs);
} //end if
} //end if
*/
#endif
#else
static int area = -1;
static int line[2];
int newarea, i, highlightarea, bot_testhidepos, hideposarea, bot_debug;
vec3_t forward, origin;
// vec3_t mins = {-16, -16, -24};
// vec3_t maxs = {16, 16, 32};
if ( !aasworld->loaded ) {
return 0;
}
AAS_SetCurrentWorld( 0 );
for ( i = 0; i < 2; i++ ) {
if ( !line[i] ) {
line[i] = botimport.DebugLineCreate();
}
}
// AAS_ClearShownDebugLines();
bot_testhidepos = LibVarGetValue( "bot_testhidepos" );
if ( bot_testhidepos ) {
VectorCopy( parm2, origin );
newarea = BotFuzzyPointReachabilityArea( origin );
if ( parm0 & 1 ) {
botlibglobals.goalareanum = newarea;
VectorCopy( origin, botlibglobals.goalorigin );
botimport.Print( PRT_MESSAGE, "new enemy position %2.1f %2.1f %2.1f area %d\n", origin[0], origin[1], origin[2], newarea );
} //end if
AAS_ClearShownPolygons();
AAS_ClearShownDebugLines();
hideposarea = AAS_NearestHideArea( 0, origin, AAS_PointAreaNum( origin ), 0,
botlibglobals.goalorigin, botlibglobals.goalareanum, TFL_DEFAULT, 99999, NULL );
//area we are currently in
AAS_ShowAreaPolygons( newarea, 1, qtrue );
//enemy position
AAS_ShowAreaPolygons( botlibglobals.goalareanum, 2, qtrue );
//area we should go hide
AAS_ShowAreaPolygons( hideposarea, 4, qtrue );
return 0;
}
highlightarea = LibVarGetValue( "bot_highlightarea" );
if ( highlightarea > 0 ) {
newarea = highlightarea;
} else {
VectorCopy( parm2, origin );
//origin[2] += 0.5;
newarea = BotFuzzyPointReachabilityArea( origin );
} //end else
bot_debug = LibVarGetValue( "bot_debug" );
if ( bot_debug == 9 ) {
aas_clientmove_t move;
vec3_t dest;
qboolean this_success;
if ( parm0 & 1 ) {
botlibglobals.goalareanum = newarea;
VectorCopy( parm2, botlibglobals.goalorigin );
botimport.Print( PRT_MESSAGE, "new goal %2.1f %2.1f %2.1f area %d\n", origin[0], origin[1], origin[2], newarea );
}
VectorCopy( parm2, origin );
VectorCopy( botlibglobals.goalorigin, dest );
// debug direct movement
VectorSubtract( dest, origin, forward );
VectorNormalize( forward );
VectorScale( forward, 300, forward );
this_success = AAS_PredictClientMovement( &move, 0, origin,
-1, qfalse,
forward, dest, -1,
40, 0.05, SE_ENTERAREA | SE_HITGROUNDDAMAGE | SE_HITENT | SE_HITGROUNDAREA | SE_STUCK | SE_GAP, botlibglobals.goalareanum,
qtrue );
if ( this_success ) {
switch ( move.stopevent ) {
case SE_ENTERAREA:
case SE_HITENT:
case SE_HITGROUNDAREA:
break;
default:
this_success = qfalse;
}
}
if ( this_success != botlibglobals.lastsuccess ) {
botimport.Print( PRT_MESSAGE, "DirectMove: %s\n", this_success ? "SUCCESS" : "FAILURE" );
botlibglobals.lastsuccess = this_success;
}
return 0;
}
botimport.Print( PRT_MESSAGE, "\rtravel time to goal (%d) = %d ", botlibglobals.goalareanum, AAS_AreaTravelTimeToGoalArea( newarea, origin, botlibglobals.goalareanum, TFL_DEFAULT ) );
if ( newarea != area ) {
botimport.Print( PRT_MESSAGE, "origin = %f, %f, %f\n", origin[0], origin[1], origin[2] );
area = newarea;
botimport.Print( PRT_MESSAGE, "new area %d, cluster %d, presence type %d\n", area, AAS_AreaCluster( area ), AAS_PointPresenceType( origin ) );
if ( aasworld->areasettings[area].areaflags & AREA_LIQUID ) {
botimport.Print( PRT_MESSAGE, "liquid area\n" );
} //end if
botimport.Print( PRT_MESSAGE, "area contents: " );
if ( aasworld->areasettings[area].contents & AREACONTENTS_MOVER ) {
botimport.Print( PRT_MESSAGE, "mover " );
} //end if
if ( aasworld->areasettings[area].contents & AREACONTENTS_WATER ) {
botimport.Print( PRT_MESSAGE, "water " );
} //end if
if ( aasworld->areasettings[area].contents & AREACONTENTS_LAVA ) {
botimport.Print( PRT_MESSAGE, "lava " );
} //end if
if ( aasworld->areasettings[area].contents & AREACONTENTS_SLIME ) {
botimport.Print( PRT_MESSAGE, "slag " );
} //end if
if ( aasworld->areasettings[area].contents & AREACONTENTS_JUMPPAD ) {
botimport.Print( PRT_MESSAGE, "jump pad " );
} //end if
if ( aasworld->areasettings[area].contents & AREACONTENTS_CLUSTERPORTAL ) {
botimport.Print( PRT_MESSAGE, "cluster portal " );
} //end if
if ( aasworld->areasettings[area].contents & AREACONTENTS_DONOTENTER ) {
botimport.Print( PRT_MESSAGE, "do not enter " );
} //end if
if ( aasworld->areasettings[area].contents & AREACONTENTS_DONOTENTER_LARGE ) {
botimport.Print( PRT_MESSAGE, "do not enter large " );
} //end if
if ( !aasworld->areasettings[area].contents ) {
botimport.Print( PRT_MESSAGE, "empty " );
} //end if
botimport.Print( PRT_MESSAGE, "\n" );
botimport.Print( PRT_MESSAGE, "area flags: " );
if ( aasworld->areasettings[area].areaflags & AREA_LADDER ) {
botimport.Print( PRT_MESSAGE, "ladder " );
}
if ( aasworld->areasettings[area].areaflags & AREA_GROUNDED ) {
botimport.Print( PRT_MESSAGE, "grounded " );
}
if ( aasworld->areasettings[area].areaflags & AREA_LIQUID ) {
botimport.Print( PRT_MESSAGE, "liquid " );
}
if ( aasworld->areasettings[area].areaflags & AREA_DISABLED ) {
botimport.Print( PRT_MESSAGE, "DISABLED " );
}
if ( aasworld->areasettings[area].areaflags & AREA_AVOID ) {
botimport.Print( PRT_MESSAGE, "AVOID " );
}
botimport.Print( PRT_MESSAGE, "\n" );
botimport.Print( PRT_MESSAGE, "travel time to goal (%d) = %d\n", botlibglobals.goalareanum, AAS_AreaTravelTimeToGoalArea( newarea, origin, botlibglobals.goalareanum, TFL_DEFAULT | TFL_ROCKETJUMP ) );
}
if ( parm0 & 1 ) {
botlibglobals.goalareanum = newarea;
VectorCopy( parm2, botlibglobals.goalorigin );
botimport.Print( PRT_MESSAGE, "new goal %2.1f %2.1f %2.1f area %d\n", origin[0], origin[1], origin[2], newarea );
}
AAS_ClearShownPolygons();
AAS_ClearShownDebugLines();
if ( parm0 & 8 ) {
int jk = 0;
if ( parm0 & 16 ) {
for ( ; jk < aasworld->numareas; jk++ ) {
if ( !( aasworld->areasettings[jk].areaflags & AREA_DISABLED ) ) {
AAS_ShowAreaPolygons( jk, 1, parm0 & 4 );
}
}
} else {
for ( ; jk < aasworld->numareas; jk++ ) {
AAS_ShowAreaPolygons( jk, 1, parm0 & 4 );
}
}
} else {
AAS_ShowAreaPolygons( newarea, 1, parm0 & 4 );
}
if ( parm0 & 2 ) {
AAS_ShowReachableAreas( area );
} else {
static int lastgoalareanum, lastareanum;
static int avoidreach[MAX_AVOIDREACH];
static float avoidreachtimes[MAX_AVOIDREACH];
static int avoidreachtries[MAX_AVOIDREACH];
int reachnum;
bot_goal_t goal;
aas_reachability_t reach;
static int lastreach;
goal.areanum = botlibglobals.goalareanum;
VectorCopy( botlibglobals.goalorigin, goal.origin );
reachnum = BotGetReachabilityToGoal( origin, newarea, -1,
lastgoalareanum, lastareanum,
avoidreach, avoidreachtimes, avoidreachtries,
&goal, TFL_DEFAULT | TFL_FUNCBOB, TFL_DEFAULT );
AAS_ReachabilityFromNum( reachnum, &reach );
if ( lastreach != reachnum ) {
botimport.Print( PRT_MESSAGE, "Travel Type: " );
AAS_PrintTravelType( reach.traveltype );
botimport.Print( PRT_MESSAGE, "\n" );
}
lastreach = reachnum;
AAS_ShowReachability( &reach );
} //end else
VectorClear( forward );
#endif // RTCW_XX
return 0;
} //end of the function BotExportTest
void AAS_AddTeleporterPortals(void)
{
int j, area2num, facenum, otherareanum;
char *target, *targetname, *classname;
bsp_entity_t *entities, *ent, *dest;
vec3_t origin, destorigin, mins, maxs, end;
vec3_t bbmins, bbmaxs;
aas_area_t *area;
aas_face_t *face;
aas_trace_t trace;
aas_link_t *areas, *link;
entities = AAS_ParseBSPEntities();
for (ent = entities; ent; ent = ent->next)
{
classname = AAS_ValueForBSPEpairKey(ent, "classname");
if (classname && !strcmp(classname, "misc_teleporter"))
{
if (!AAS_VectorForBSPEpairKey(ent, "origin", origin))
{
botimport.Print(PRT_ERROR, "teleporter (%s) without origin\n", target);
continue;
} //end if
//
target = AAS_ValueForBSPEpairKey(ent, "target");
if (!target)
{
botimport.Print(PRT_ERROR, "teleporter (%s) without target\n", target);
continue;
} //end if
for (dest = entities; dest; dest = dest->next)
{
classname = AAS_ValueForBSPEpairKey(dest, "classname");
if (classname && !strcmp(classname, "misc_teleporter_dest"))
{
targetname = AAS_ValueForBSPEpairKey(dest, "targetname");
if (targetname && !strcmp(targetname, target))
{
break;
} //end if
} //end if
} //end for
if (!dest)
{
botimport.Print(PRT_ERROR, "teleporter without destination (%s)\n", target);
continue;
} //end if
if (!AAS_VectorForBSPEpairKey(dest, "origin", destorigin))
{
botimport.Print(PRT_ERROR, "teleporter destination (%s) without origin\n", target);
continue;
} //end if
destorigin[2] += 24; //just for q2e1m2, the dork has put the telepads in the ground
VectorCopy(destorigin, end);
end[2] -= 100;
trace = AAS_TraceClientBBox(destorigin, end, PRESENCE_CROUCH, -1);
if (trace.startsolid)
{
botimport.Print(PRT_ERROR, "teleporter destination (%s) in solid\n", target);
continue;
} //end if
VectorCopy(trace.endpos, destorigin);
area2num = AAS_PointAreaNum(destorigin);
//reset all cluster fields
for (j = 0; j < aasworld.numareas; j++)
{
aasworld.areasettings[j].cluster = 0;
} //end for
//
VectorSet(mins, -8, -8, 8);
VectorSet(maxs, 8, 8, 24);
//
AAS_PresenceTypeBoundingBox(PRESENCE_CROUCH, bbmins, bbmaxs);
//
VectorAdd(origin, mins, mins);
VectorAdd(origin, maxs, maxs);
//add bounding box size
VectorSubtract(mins, bbmaxs, mins);
VectorSubtract(maxs, bbmins, maxs);
//link an invalid (-1) entity
areas = AAS_AASLinkEntity(mins, maxs, -1);
//
for (link = areas; link; link = link->next_area)
{
if (!AAS_AreaGrounded(link->areanum)) continue;
//add the teleporter portal mark
aasworld.areasettings[link->areanum].contents |= AREACONTENTS_CLUSTERPORTAL |
AREACONTENTS_TELEPORTAL;
} //end for
//
for (link = areas; link; link = link->next_area)
{
if (!AAS_AreaGrounded(link->areanum)) continue;
//find a non-portal area adjacent to the portal area and flood
//the cluster from there
area = &aasworld.areas[link->areanum];
for (j = 0; j < area->numfaces; j++)
{
facenum = abs(aasworld.faceindex[area->firstface + j]);
face = &aasworld.faces[facenum];
//
if (face->frontarea != link->areanum) otherareanum = face->frontarea;
else otherareanum = face->backarea;
//
if (!otherareanum) continue;
//
if (aasworld.areasettings[otherareanum].contents & AREACONTENTS_CLUSTERPORTAL)
{
continue;
} //end if
//
AAS_FloodCluster_r(otherareanum, 1);
} //end for
} //end for
//if the teleport destination IS in the same cluster
if (aasworld.areasettings[area2num].cluster)
{
for (link = areas; link; link = link->next_area)
{
if (!AAS_AreaGrounded(link->areanum)) continue;
//add the teleporter portal mark
aasworld.areasettings[link->areanum].contents &= ~(AREACONTENTS_CLUSTERPORTAL |
AREACONTENTS_TELEPORTAL);
} //end for
} //end if
} //end if
} //end for
AAS_FreeBSPEntities(entities);
} //end of the function AAS_AddTeleporterPortals
//===========================================================================
// predicts the movement
// assumes regular bounding box sizes
// NOTE: out of water jumping is not included
// NOTE: grappling hook is not included
//
// Parameter: origin : origin to start with
// presencetype : presence type to start with
// velocity : velocity to start with
// cmdmove : client command movement
// cmdframes : number of frame cmdmove is valid
// maxframes : maximum number of predicted frames
// frametime : duration of one predicted frame
// stopevent : events that stop the prediction
// stopareanum : stop as soon as entered this area
// Returns: aas_clientmove_t
// Changes Globals: -
//===========================================================================
int AAS_PredictClientMovement( struct aas_clientmove_s *move,
int entnum, vec3_t origin,
#if !defined RTCW_ET
int presencetype, int onground,
#else
int hitent, int onground,
#endif // RTCW_XX
vec3_t velocity, vec3_t cmdmove,
int cmdframes,
int maxframes, float frametime,
int stopevent, int stopareanum, int visualize ) {
float sv_friction, sv_stopspeed, sv_gravity, sv_waterfriction;
float sv_watergravity;
float sv_walkaccelerate, sv_airaccelerate, sv_swimaccelerate;
float sv_maxwalkvelocity, sv_maxcrouchvelocity, sv_maxswimvelocity;
float sv_maxstep, sv_maxsteepness, sv_jumpvel, friction;
float gravity, delta, maxvel, wishspeed, accelerate;
//float velchange, newvel;
int n, i, j, pc, step, swimming, ax, crouch, event, jump_frame, areanum;
int areas[20], numareas;
#if !defined RTCW_ET
vec3_t points[20];
vec3_t org, end, feet, start, stepend, lastorg, wishdir;
vec3_t frame_test_vel, old_frame_test_vel, left_test_vel;
vec3_t up = {0, 0, 1};
aas_plane_t *plane, *plane2;
aas_trace_t trace, steptrace;
#else
vec3_t points[20], mins, maxs;
vec3_t org, end, feet, start, stepend, lastorg, wishdir;
vec3_t frame_test_vel, old_frame_test_vel, left_test_vel, savevel;
vec3_t up = {0, 0, 1};
cplane_t *plane, *plane2, *lplane;
//aas_trace_t trace, steptrace;
bsp_trace_t trace, steptrace;
if ( visualize ) {
// These debugging tools are not currently available in bspc. Mad Doctor I, 1/27/2003.
#ifndef BSPC
AAS_ClearShownPolygons();
AAS_ClearShownDebugLines();
#endif
}
// don't let us succeed on interaction with area 0
if ( stopareanum == 0 ) {
stopevent &= ~( SE_ENTERAREA | SE_HITGROUNDAREA );
}
#endif // RTCW_XX
if ( frametime <= 0 ) {
frametime = 0.1;
}
//
sv_friction = aassettings.sv_friction;
sv_stopspeed = aassettings.sv_stopspeed;
sv_gravity = aassettings.sv_gravity;
sv_waterfriction = aassettings.sv_waterfriction;
sv_watergravity = aassettings.sv_watergravity;
sv_maxwalkvelocity = aassettings.sv_maxwalkvelocity; // * frametime;
sv_maxcrouchvelocity = aassettings.sv_maxcrouchvelocity; // * frametime;
sv_maxswimvelocity = aassettings.sv_maxswimvelocity; // * frametime;
sv_walkaccelerate = aassettings.sv_walkaccelerate;
sv_airaccelerate = aassettings.sv_airaccelerate;
sv_swimaccelerate = aassettings.sv_swimaccelerate;
sv_maxstep = aassettings.sv_maxstep;
sv_maxsteepness = aassettings.sv_maxsteepness;
sv_jumpvel = aassettings.sv_jumpvel * frametime;
//
memset( move, 0, sizeof( aas_clientmove_t ) );
#if !defined RTCW_ET
memset( &trace, 0, sizeof( aas_trace_t ) );
#else
memset( &trace, 0, sizeof( bsp_trace_t ) );
AAS_PresenceTypeBoundingBox( PRESENCE_NORMAL, mins, maxs );
#endif // RTCW_XX
//start at the current origin
VectorCopy( origin, org );
org[2] += 0.25;
#if defined RTCW_ET
// test this position, if it's in solid, move it up to adjust for capsules
//trace = AAS_TraceClientBBox(org, org, PRESENCE_NORMAL, entnum);
trace = AAS_Trace( org, mins, maxs, org, entnum, ( CONTENTS_SOLID | CONTENTS_PLAYERCLIP ) & ~CONTENTS_BODY );
while ( trace.startsolid ) {
org[2] += 8;
//trace = AAS_TraceClientBBox(org, org, PRESENCE_NORMAL, entnum);
trace = AAS_Trace( org, mins, maxs, org, entnum, ( CONTENTS_SOLID | CONTENTS_PLAYERCLIP ) & ~CONTENTS_BODY );
if ( trace.startsolid && ( org[2] - origin[2] > 16 ) ) {
move->stopevent = SE_NONE;
return qfalse;
}
}
#endif // RTCW_XX
//velocity to test for the first frame
VectorScale( velocity, frametime, frame_test_vel );
//
jump_frame = -1;
#if defined RTCW_ET
lplane = NULL;
#endif // RTCW_XX
//predict a maximum of 'maxframes' ahead
for ( n = 0; n < maxframes; n++ )
{
swimming = AAS_Swimming( org );
//get gravity depending on swimming or not
gravity = swimming ? sv_watergravity : sv_gravity;
//apply gravity at the START of the frame
frame_test_vel[2] = frame_test_vel[2] - ( gravity * 0.1 * frametime );
//if on the ground or swimming
if ( onground || swimming ) {
friction = swimming ? sv_friction : sv_waterfriction;
//apply friction
VectorScale( frame_test_vel, 1 / frametime, frame_test_vel );
AAS_ApplyFriction( frame_test_vel, friction, sv_stopspeed, frametime );
VectorScale( frame_test_vel, frametime, frame_test_vel );
} //end if
crouch = qfalse;
//apply command movement
#if !defined RTCW_ET
if ( n < cmdframes ) {
#else
if ( cmdframes < 0 ) {
// cmdmove is the destination, we should keep moving towards it
VectorSubtract( cmdmove, org, wishdir );
VectorNormalize( wishdir );
VectorScale( wishdir, sv_maxwalkvelocity, wishdir );
VectorCopy( frame_test_vel, savevel );
VectorScale( wishdir, frametime, frame_test_vel );
if ( !swimming ) {
frame_test_vel[2] = savevel[2];
}
} else if ( n < cmdframes ) {
#endif // RTCW_XX
ax = 0;
maxvel = sv_maxwalkvelocity;
accelerate = sv_airaccelerate;
VectorCopy( cmdmove, wishdir );
if ( onground ) {
if ( cmdmove[2] < -300 ) {
crouch = qtrue;
maxvel = sv_maxcrouchvelocity;
} //end if
//if not swimming and upmove is positive then jump
if ( !swimming && cmdmove[2] > 1 ) {
//jump velocity minus the gravity for one frame + 5 for safety
frame_test_vel[2] = sv_jumpvel - ( gravity * 0.1 * frametime ) + 5;
jump_frame = n;
//jumping so air accelerate
accelerate = sv_airaccelerate;
} //end if
else
{
accelerate = sv_walkaccelerate;
} //end else
ax = 2;
} //end if
if ( swimming ) {
maxvel = sv_maxswimvelocity;
accelerate = sv_swimaccelerate;
ax = 3;
} //end if
else
{
wishdir[2] = 0;
} //end else
//
wishspeed = VectorNormalize( wishdir );
if ( wishspeed > maxvel ) {
wishspeed = maxvel;
}
VectorScale( frame_test_vel, 1 / frametime, frame_test_vel );
AAS_Accelerate( frame_test_vel, frametime, wishdir, wishspeed, accelerate );
VectorScale( frame_test_vel, frametime, frame_test_vel );
/*
for (i = 0; i < ax; i++)
{
velchange = (cmdmove[i] * frametime) - frame_test_vel[i];
if (velchange > sv_maxacceleration) velchange = sv_maxacceleration;
else if (velchange < -sv_maxacceleration) velchange = -sv_maxacceleration;
newvel = frame_test_vel[i] + velchange;
//
if (frame_test_vel[i] <= maxvel && newvel > maxvel) frame_test_vel[i] = maxvel;
else if (frame_test_vel[i] >= -maxvel && newvel < -maxvel) frame_test_vel[i] = -maxvel;
else frame_test_vel[i] = newvel;
} //end for
*/
} //end if
#if !defined RTCW_ET
if ( crouch ) {
presencetype = PRESENCE_CROUCH;
} //end if
else if ( presencetype == PRESENCE_CROUCH ) {
if ( AAS_PointPresenceType( org ) & PRESENCE_NORMAL ) {
presencetype = PRESENCE_NORMAL;
} //end if
} //end else
#else
//if (crouch)
//{
// presencetype = PRESENCE_CROUCH;
//} //end if
//else if (presencetype == PRESENCE_CROUCH)
//{
// if (AAS_PointPresenceType(org) & PRESENCE_NORMAL)
// {
// presencetype = PRESENCE_NORMAL;
// } //end if
//} //end else
#endif // RTCW_XX
//save the current origin
VectorCopy( org, lastorg );
//move linear during one frame
VectorCopy( frame_test_vel, left_test_vel );
j = 0;
do
{
VectorAdd( org, left_test_vel, end );
//trace a bounding box
#if !defined RTCW_ET
trace = AAS_TraceClientBBox( org, end, presencetype, entnum );
#else
//trace = AAS_TraceClientBBox(org, end, PRESENCE_NORMAL, entnum);
trace = AAS_Trace( org, mins, maxs, end, entnum, ( CONTENTS_SOLID | CONTENTS_PLAYERCLIP ) & ~CONTENTS_BODY );
#endif // RTCW_XX
//
//#ifdef AAS_MOVE_DEBUG
if ( visualize ) {
#if !defined RTCW_ET
if ( trace.startsolid ) {
botimport.Print( PRT_MESSAGE, "PredictMovement: start solid\n" );
}
#else
//if (trace.startsolid)
//botimport.Print(PRT_MESSAGE, "PredictMovement: start solid\n");
#endif // RTCW_XX
AAS_DebugLine( org, trace.endpos, LINECOLOR_RED );
} //end if
//#endif //AAS_MOVE_DEBUG
//
#if defined RTCW_ET
if ( stopevent & SE_HITENT ) {
if ( trace.fraction < 1.0 && trace.ent == hitent ) {
areanum = AAS_PointAreaNum( org );
VectorCopy( org, move->endpos );
VectorScale( frame_test_vel, 1 / frametime, move->velocity );
move->trace = trace;
move->stopevent = SE_HITENT;
move->presencetype = ( *aasworld ).areasettings[areanum].presencetype;
move->endcontents = 0;
move->time = n * frametime;
move->frames = n;
return qtrue;
}
}
#endif // RTCW_XX
if ( stopevent & SE_ENTERAREA ) {
numareas = AAS_TraceAreas( org, trace.endpos, areas, points, 20 );
for ( i = 0; i < numareas; i++ )
{
if ( areas[i] == stopareanum ) {
VectorCopy( points[i], move->endpos );
VectorScale( frame_test_vel, 1 / frametime, move->velocity );
move->trace = trace;
move->stopevent = SE_ENTERAREA;
#if !defined RTCW_ET
move->presencetype = presencetype;
#else
move->presencetype = ( *aasworld ).areasettings[areas[i]].presencetype;
#endif // RTCW_XX
move->endcontents = 0;
move->time = n * frametime;
move->frames = n;
return qtrue;
} //end if
} //end for
} //end if
#if defined RTCW_ET
if ( stopevent & SE_STUCK ) {
if ( trace.fraction < 1.0 ) {
plane = &trace.plane;
//if (Q_fabs(plane->normal[2]) <= sv_maxsteepness) {
VectorNormalize2( frame_test_vel, wishdir );
if ( DotProduct( plane->normal, wishdir ) < -0.8 ) {
areanum = AAS_PointAreaNum( org );
VectorCopy( org, move->endpos );
VectorScale( frame_test_vel, 1 / frametime, move->velocity );
move->trace = trace;
move->stopevent = SE_STUCK;
move->presencetype = ( *aasworld ).areasettings[areanum].presencetype;
move->endcontents = 0;
move->time = n * frametime;
move->frames = n;
return qtrue;
}
}
}
#endif // RTCW_XX
//move the entity to the trace end point
VectorCopy( trace.endpos, org );
//if there was a collision
if ( trace.fraction < 1.0 ) {
//get the plane the bounding box collided with
#if !defined RTCW_ET
plane = AAS_PlaneFromNum( trace.planenum );
#else
plane = &trace.plane;
#endif // RTCW_XX
//
if ( stopevent & SE_HITGROUNDAREA ) {
if ( DotProduct( plane->normal, up ) > sv_maxsteepness ) {
VectorCopy( org, start );
start[2] += 0.5;
#if !defined RTCW_ET
if ( AAS_PointAreaNum( start ) == stopareanum ) {
#else
if ( ( stopareanum < 0 && AAS_PointAreaNum( start ) ) || ( AAS_PointAreaNum( start ) == stopareanum ) ) {
#endif // RTCW_XX
VectorCopy( start, move->endpos );
VectorScale( frame_test_vel, 1 / frametime, move->velocity );
move->trace = trace;
move->stopevent = SE_HITGROUNDAREA;
#if !defined RTCW_ET
move->presencetype = presencetype;
#else
move->presencetype = ( *aasworld ).areasettings[stopareanum].presencetype;
#endif // RTCW_XX
move->endcontents = 0;
move->time = n * frametime;
move->frames = n;
return qtrue;
} //end if
} //end if
} //end if
//assume there's no step
step = qfalse;
//if it is a vertical plane and the bot didn't jump recently
if ( plane->normal[2] == 0 && ( jump_frame < 0 || n - jump_frame > 2 ) ) {
//check for a step
VectorMA( org, -0.25, plane->normal, start );
VectorCopy( start, stepend );
start[2] += sv_maxstep;
#if !defined RTCW_ET
steptrace = AAS_TraceClientBBox( start, stepend, presencetype, entnum );
#else
//steptrace = AAS_TraceClientBBox(start, stepend, PRESENCE_NORMAL, entnum);
steptrace = AAS_Trace( start, mins, maxs, stepend, entnum, ( CONTENTS_SOLID | CONTENTS_PLAYERCLIP ) & ~CONTENTS_BODY );
#endif // RTCW_XX
//
if ( !steptrace.startsolid ) {
#if !defined RTCW_ET
plane2 = AAS_PlaneFromNum( steptrace.planenum );
#else
plane2 = &steptrace.plane;
#endif // RTCW_XX
if ( DotProduct( plane2->normal, up ) > sv_maxsteepness ) {
VectorSubtract( end, steptrace.endpos, left_test_vel );
left_test_vel[2] = 0;
frame_test_vel[2] = 0;
//#ifdef AAS_MOVE_DEBUG
if ( visualize ) {
if ( steptrace.endpos[2] - org[2] > 0.125 ) {
VectorCopy( org, start );
start[2] = steptrace.endpos[2];
AAS_DebugLine( org, start, LINECOLOR_BLUE );
} //end if
} //end if
//#endif //AAS_MOVE_DEBUG
org[2] = steptrace.endpos[2];
step = qtrue;
} //end if
} //end if
} //end if
//
if ( !step ) {
//velocity left to test for this frame is the projection
//of the current test velocity into the hit plane
VectorMA( left_test_vel, -DotProduct( left_test_vel, plane->normal ),
plane->normal, left_test_vel );
#if defined RTCW_ET
// RF: from PM_SlideMove()
// if this is the same plane we hit before, nudge velocity
// out along it, which fixes some epsilon issues with
// non-axial planes
if ( lplane && DotProduct( lplane->normal, plane->normal ) > 0.99 ) {
VectorAdd( plane->normal, left_test_vel, left_test_vel );
}
lplane = plane;
#endif // RTCW_XX
//store the old velocity for landing check
VectorCopy( frame_test_vel, old_frame_test_vel );
//test velocity for the next frame is the projection
//of the velocity of the current frame into the hit plane
VectorMA( frame_test_vel, -DotProduct( frame_test_vel, plane->normal ),
plane->normal, frame_test_vel );
//check for a landing on an almost horizontal floor
if ( DotProduct( plane->normal, up ) > sv_maxsteepness ) {
onground = qtrue;
} //end if
if ( stopevent & SE_HITGROUNDDAMAGE ) {
delta = 0;
if ( old_frame_test_vel[2] < 0 &&
frame_test_vel[2] > old_frame_test_vel[2] &&
!onground ) {
delta = old_frame_test_vel[2];
} //end if
else if ( onground ) {
delta = frame_test_vel[2] - old_frame_test_vel[2];
} //end else
if ( delta ) {
delta = delta * 10;
delta = delta * delta * 0.0001;
if ( swimming ) {
delta = 0;
}
// never take falling damage if completely underwater
/*
if (ent->waterlevel == 3) return;
if (ent->waterlevel == 2) delta *= 0.25;
if (ent->waterlevel == 1) delta *= 0.5;
*/
if ( delta > 40 ) {
VectorCopy( org, move->endpos );
VectorCopy( frame_test_vel, move->velocity );
move->trace = trace;
move->stopevent = SE_HITGROUNDDAMAGE;
#if !defined RTCW_ET
move->presencetype = presencetype;
#else
areanum = AAS_PointAreaNum( org );
if ( areanum ) {
move->presencetype = ( *aasworld ).areasettings[areanum].presencetype;
}
#endif // RTCW_XX
move->endcontents = 0;
move->time = n * frametime;
move->frames = n;
return qtrue;
} //end if
} //end if
} //end if
} //end if
} //end if
//extra check to prevent endless loop
if ( ++j > 20 ) {
return qfalse;
}
//while there is a plane hit
} while ( trace.fraction < 1.0 );
//if going down
if ( frame_test_vel[2] <= 10 ) {
//check for a liquid at the feet of the bot
VectorCopy( org, feet );
feet[2] -= 22;
pc = AAS_PointContents( feet );
//get event from pc
event = SE_NONE;
if ( pc & CONTENTS_LAVA ) {
event |= SE_ENTERLAVA;
}
if ( pc & CONTENTS_SLIME ) {
event |= SE_ENTERSLIME;
}
if ( pc & CONTENTS_WATER ) {
event |= SE_ENTERWATER;
}
//
areanum = AAS_PointAreaNum( org );
if ( ( *aasworld ).areasettings[areanum].contents & AREACONTENTS_LAVA ) {
event |= SE_ENTERLAVA;
}
if ( ( *aasworld ).areasettings[areanum].contents & AREACONTENTS_SLIME ) {
event |= SE_ENTERSLIME;
}
if ( ( *aasworld ).areasettings[areanum].contents & AREACONTENTS_WATER ) {
event |= SE_ENTERWATER;
}
//if in lava or slime
if ( event & stopevent ) {
VectorCopy( org, move->endpos );
VectorScale( frame_test_vel, 1 / frametime, move->velocity );
move->stopevent = event & stopevent;
#if !defined RTCW_ET
move->presencetype = presencetype;
#else
move->presencetype = ( *aasworld ).areasettings[areanum].presencetype;
#endif // RTCW_XX
move->endcontents = pc;
move->time = n * frametime;
move->frames = n;
return qtrue;
} //end if
} //end if
//
#if !defined RTCW_ET
onground = AAS_OnGround( org, presencetype, entnum );
#else
onground = AAS_OnGround( org, PRESENCE_NORMAL, entnum );
#endif // RTCW_XX
//if onground and on the ground for at least one whole frame
if ( onground ) {
if ( stopevent & SE_HITGROUND ) {
VectorCopy( org, move->endpos );
VectorScale( frame_test_vel, 1 / frametime, move->velocity );
move->trace = trace;
move->stopevent = SE_HITGROUND;
#if !defined RTCW_ET
move->presencetype = presencetype;
#else
areanum = AAS_PointAreaNum( org );
if ( areanum ) {
move->presencetype = ( *aasworld ).areasettings[areanum].presencetype;
}
#endif // RTCW_XX
move->endcontents = 0;
move->time = n * frametime;
move->frames = n;
return qtrue;
} //end if
} //end if
else if ( stopevent & SE_LEAVEGROUND ) {
VectorCopy( org, move->endpos );
VectorScale( frame_test_vel, 1 / frametime, move->velocity );
move->trace = trace;
move->stopevent = SE_LEAVEGROUND;
#if !defined RTCW_ET
move->presencetype = presencetype;
#else
areanum = AAS_PointAreaNum( org );
if ( areanum ) {
move->presencetype = ( *aasworld ).areasettings[areanum].presencetype;
}
#endif // RTCW_XX
move->endcontents = 0;
move->time = n * frametime;
move->frames = n;
return qtrue;
} //end else if
else if ( stopevent & SE_GAP ) {
#if !defined RTCW_ET
aas_trace_t gaptrace;
#else
bsp_trace_t gaptrace;
#endif // RTCW_XX
VectorCopy( org, start );
VectorCopy( start, end );
end[2] -= 48 + aassettings.sv_maxbarrier;
#if !defined RTCW_ET
gaptrace = AAS_TraceClientBBox( start, end, PRESENCE_CROUCH, -1 );
#else
//gaptrace = AAS_TraceClientBBox(start, end, PRESENCE_CROUCH, -1);
gaptrace = AAS_Trace( start, mins, maxs, end, -1, ( CONTENTS_SOLID | CONTENTS_PLAYERCLIP ) & ~CONTENTS_BODY );
#endif // RTCW_XX
//if solid is found the bot cannot walk any further and will not fall into a gap
if ( !gaptrace.startsolid ) {
//if it is a gap (lower than one step height)
if ( gaptrace.endpos[2] < org[2] - aassettings.sv_maxstep - 1 ) {
if ( !( AAS_PointContents( end ) & ( CONTENTS_WATER | CONTENTS_SLIME ) ) ) { //----(SA) modified since slime is no longer deadly
// if (!(AAS_PointContents(end) & CONTENTS_WATER))
VectorCopy( lastorg, move->endpos );
VectorScale( frame_test_vel, 1 / frametime, move->velocity );
move->trace = trace;
move->stopevent = SE_GAP;
#if !defined RTCW_ET
move->presencetype = presencetype;
#else
areanum = AAS_PointAreaNum( org );
if ( areanum ) {
move->presencetype = ( *aasworld ).areasettings[areanum].presencetype;
}
#endif // RTCW_XX
move->endcontents = 0;
move->time = n * frametime;
move->frames = n;
return qtrue;
} //end if
} //end if
} //end if
} //end else if
if ( stopevent & SE_TOUCHJUMPPAD ) {
if ( ( *aasworld ).areasettings[AAS_PointAreaNum( org )].contents & AREACONTENTS_JUMPPAD ) {
VectorCopy( org, move->endpos );
VectorScale( frame_test_vel, 1 / frametime, move->velocity );
move->trace = trace;
move->stopevent = SE_TOUCHJUMPPAD;
#if !defined RTCW_ET
move->presencetype = presencetype;
#else
areanum = AAS_PointAreaNum( org );
if ( areanum ) {
move->presencetype = ( *aasworld ).areasettings[areanum].presencetype;
}
#endif // RTCW_XX
move->endcontents = 0;
move->time = n * frametime;
move->frames = n;
return qtrue;
} //end if
} //end if
if ( stopevent & SE_TOUCHTELEPORTER ) {
if ( ( *aasworld ).areasettings[AAS_PointAreaNum( org )].contents & AREACONTENTS_TELEPORTER ) {
VectorCopy( org, move->endpos );
VectorScale( frame_test_vel, 1 / frametime, move->velocity );
move->trace = trace;
move->stopevent = SE_TOUCHTELEPORTER;
#if !defined RTCW_ET
move->presencetype = presencetype;
#else
areanum = AAS_PointAreaNum( org );
if ( areanum ) {
move->presencetype = ( *aasworld ).areasettings[areanum].presencetype;
}
#endif // RTCW_XX
move->endcontents = 0;
move->time = n * frametime;
move->frames = n;
return qtrue;
} //end if
} //end if
} //end for
//
#if defined RTCW_ET
areanum = AAS_PointAreaNum( org );
#endif // RTCW_XX
VectorCopy( org, move->endpos );
VectorScale( frame_test_vel, 1 / frametime, move->velocity );
move->stopevent = SE_NONE;
#if !defined RTCW_ET
move->presencetype = presencetype;
#else
move->presencetype = aasworld->areasettings ? aasworld->areasettings[areanum].presencetype : 0;
#endif // RTCW_XX
move->endcontents = 0;
move->time = n * frametime;
move->frames = n;
//
return qtrue;
} //end of the function AAS_PredictClientMovement
//===========================================================================
//
// Parameter: -
// Returns: -
// Changes Globals: -
//===========================================================================
void AAS_TestMovementPrediction( int entnum, vec3_t origin, vec3_t dir ) {
vec3_t velocity, cmdmove;
aas_clientmove_t move;
VectorClear( velocity );
if ( !AAS_Swimming( origin ) ) {
dir[2] = 0;
}
VectorNormalize( dir );
VectorScale( dir, 400, cmdmove );
cmdmove[2] = 224;
AAS_ClearShownDebugLines();
AAS_PredictClientMovement( &move, entnum, origin, PRESENCE_NORMAL, qtrue,
velocity, cmdmove, 13, 13, 0.1, SE_HITGROUND, 0, qtrue ); //SE_LEAVEGROUND);
if ( move.stopevent & SE_LEAVEGROUND ) {
botimport.Print( PRT_MESSAGE, "leave ground\n" );
} //end if
} //end of the function TestMovementPrediction
//===========================================================================
// calculates the horizontal velocity needed to perform a jump from start
// to end
//
// Parameter: zvel : z velocity for jump
// start : start position of jump
// end : end position of jump
// *speed : returned speed for jump
// Returns: qfalse if too high or too far from start to end
// Changes Globals: -
//===========================================================================
int AAS_HorizontalVelocityForJump( float zvel, vec3_t start, vec3_t end, float *velocity ) {
float sv_gravity, sv_maxvelocity;
float maxjump, height2fall, t, top;
vec3_t dir;
sv_gravity = aassettings.sv_gravity;
sv_maxvelocity = aassettings.sv_maxvelocity;
//maximum height a player can jump with the given initial z velocity
maxjump = 0.5 * sv_gravity * ( zvel / sv_gravity ) * ( zvel / sv_gravity );
//top of the parabolic jump
top = start[2] + maxjump;
//height the bot will fall from the top
height2fall = top - end[2];
//if the goal is to high to jump to
if ( height2fall < 0 ) {
*velocity = sv_maxvelocity;
return 0;
} //end if
//time a player takes to fall the height
t = c::sqrt( height2fall / ( 0.5 * sv_gravity ) );
//direction from start to end
VectorSubtract( end, start, dir );
//calculate horizontal speed
*velocity = c::sqrt( dir[0] * dir[0] + dir[1] * dir[1] ) / ( t + zvel / sv_gravity );
//the horizontal speed must be lower than the max speed
if ( *velocity > sv_maxvelocity ) {
*velocity = sv_maxvelocity;
return 0;
} //end if
return 1;
} //end of the function AAS_HorizontalVelocityForJump
//===========================================================================
// returns qtrue if the bot is against a ladder
//
// Parameter: -
// Returns: -
// Changes Globals: -
//===========================================================================
int AAS_AgainstLadder( vec3_t origin, int ms_areanum ) {
int areanum, i, facenum, side;
vec3_t org;
aas_plane_t *plane;
aas_face_t *face;
aas_area_t *area;
VectorCopy( origin, org );
areanum = AAS_PointAreaNum( org );
if ( !areanum ) {
org[0] += 1;
areanum = AAS_PointAreaNum( org );
if ( !areanum ) {
org[1] += 1;
areanum = AAS_PointAreaNum( org );
if ( !areanum ) {
org[0] -= 2;
areanum = AAS_PointAreaNum( org );
if ( !areanum ) {
org[1] -= 2;
areanum = AAS_PointAreaNum( org );
} //end if
} //end if
} //end if
} //end if
//if in solid... wrrr shouldn't happen
//if (!areanum) return qfalse;
// RF, it does if they're in a monsterclip brush
if ( !areanum ) {
areanum = ms_areanum;
}
//if not in a ladder area
if ( !( ( *aasworld ).areasettings[areanum].areaflags & AREA_LADDER ) ) {
return qfalse;
}
//if a crouch only area
if ( !( ( *aasworld ).areasettings[areanum].presencetype & PRESENCE_NORMAL ) ) {
return qfalse;
}
//
area = &( *aasworld ).areas[areanum];
for ( i = 0; i < area->numfaces; i++ )
{
facenum = ( *aasworld ).faceindex[area->firstface + i];
side = facenum < 0;
face = &( *aasworld ).faces[c::abs( facenum )];
//if the face isn't a ladder face
if ( !( face->faceflags & FACE_LADDER ) ) {
continue;
}
//get the plane the face is in
plane = &( *aasworld ).planes[face->planenum ^ side];
//if the origin is pretty close to the plane
#if !defined RTCW_ET
if ( c::abs( DotProduct( plane->normal, origin ) - plane->dist ) < 3 ) {
if ( AAS_PointInsideFace( c::abs( facenum ), origin, 0.1 ) ) {
#else
if ( c::abs( DotProduct( plane->normal, origin ) - plane->dist ) < 7 ) {
// RF, if hanging on to the edge of a ladder, we have to account for bounding box touching
//if (AAS_PointInsideFace(c::abs(facenum), origin, 0.1)) return qtrue;
if ( AAS_PointInsideFace( c::abs( facenum ), origin, 2.0 ) ) {
#endif // RTCW_XX
return qtrue;
}
} //end if
} //end for
return qfalse;
} //end of the function AAS_AgainstLadder
//===========================================================================
// returns qtrue if the bot is on the ground
//
// Parameter: -
// Returns: -
// Changes Globals: -
//===========================================================================
int AAS_OnGround( vec3_t origin, int presencetype, int passent ) {
#if !defined RTCW_ET
aas_trace_t trace;
#else
//aas_trace_t trace;
bsp_trace_t trace;
#endif // RTCW_XX
vec3_t end, up = {0, 0, 1};
#if !defined RTCW_ET
aas_plane_t *plane;
#else
//aas_plane_t *plane;
vec3_t mins, maxs;
#endif // RTCW_XX
VectorCopy( origin, end );
end[2] -= 10;
#if !defined RTCW_ET
trace = AAS_TraceClientBBox( origin, end, presencetype, passent );
#else
//trace = AAS_TraceClientBBox(origin, end, presencetype, passent);
AAS_PresenceTypeBoundingBox( presencetype, mins, maxs );
trace = AAS_Trace( origin, mins, maxs, end, passent, CONTENTS_SOLID | CONTENTS_PLAYERCLIP );
#endif // RTCW_XX
//if in solid
if ( trace.startsolid ) {
#if !defined RTCW_MP
return qtrue; //qfalse;
#else
return qfalse;
#endif // RTCW_XX
}
//if nothing hit at all
if ( trace.fraction >= 1.0 ) {
return qfalse;
}
//if too far from the hit plane
if ( origin[2] - trace.endpos[2] > 10 ) {
return qfalse;
}
//check if the plane isn't too steep
#if !defined RTCW_ET
plane = AAS_PlaneFromNum( trace.planenum );
if ( DotProduct( plane->normal, up ) < aassettings.sv_maxsteepness ) {
#else
//plane = AAS_PlaneFromNum(trace.planenum);
if ( DotProduct( trace.plane.normal, up ) < aassettings.sv_maxsteepness ) {
#endif // RTCW_XX
return qfalse;
}
//the bot is on the ground
return qtrue;
} //end of the function AAS_OnGround
//===========================================================================
// returns qtrue if a bot at the given position is swimming
//
// Parameter: -
// Returns: -
// Changes Globals: -
//===========================================================================
int AAS_Swimming( vec3_t origin ) {
vec3_t testorg;
VectorCopy( origin, testorg );
testorg[2] -= 2;
if ( AAS_PointContents( testorg ) & ( CONTENTS_LAVA | CONTENTS_SLIME | CONTENTS_WATER ) ) {
return qtrue;
}
return qfalse;
} //end of the function AAS_Swimming
//===========================================================================
//
// Parameter: -
// Returns: -
// Changes Globals: -
//===========================================================================
vec3_t VEC_UP = {0, -1, 0};
vec3_t MOVEDIR_UP = {0, 0, 1};
vec3_t VEC_DOWN = {0, -2, 0};
vec3_t MOVEDIR_DOWN = {0, 0, -1};
void AAS_SetMovedir( vec3_t angles, vec3_t movedir ) {
if ( VectorCompare( angles, VEC_UP ) ) {
VectorCopy( MOVEDIR_UP, movedir );
} //end if
else if ( VectorCompare( angles, VEC_DOWN ) ) {
VectorCopy( MOVEDIR_DOWN, movedir );
} //end else if
else
{
AngleVectors( angles, movedir, NULL, NULL );
} //end else
} //end of the function AAS_SetMovedir
//===========================================================================
//
// Parameter: -
// Returns: -
// Changes Globals: -
//===========================================================================
void AAS_JumpReachRunStart( aas_reachability_t *reach, vec3_t runstart ) {
vec3_t hordir, start, cmdmove;
aas_clientmove_t move;
//
hordir[0] = reach->start[0] - reach->end[0];
hordir[1] = reach->start[1] - reach->end[1];
hordir[2] = 0;
VectorNormalize( hordir );
//start point
VectorCopy( reach->start, start );
start[2] += 1;
//get command movement
VectorScale( hordir, 400, cmdmove );
//
AAS_PredictClientMovement( &move, -1, start, PRESENCE_NORMAL, qtrue,
vec3_origin, cmdmove, 1, 2, 0.1,
SE_ENTERWATER | SE_ENTERSLIME | SE_ENTERLAVA |
SE_HITGROUNDDAMAGE | SE_GAP, 0, qfalse );
VectorCopy( move.endpos, runstart );
//don't enter slime or lava and don't fall from too high
if ( move.stopevent & ( SE_ENTERLAVA | SE_HITGROUNDDAMAGE ) ) { //----(SA) modified since slime is no longer deadly
// if (move.stopevent & (SE_ENTERSLIME|SE_ENTERLAVA|SE_HITGROUNDDAMAGE))
VectorCopy( start, runstart );
} //end if
} //end of the function AAS_JumpReachRunStart
//===========================================================================
// returns qtrue if the bot is against a ladder
//
// Parameter: -
// Returns: -
// Changes Globals: -
//===========================================================================
int AAS_AgainstLadder(vec3_t origin, int ms_areanum)
{
int areanum, i, facenum, side;
vec3_t org;
aas_plane_t *plane;
aas_face_t *face;
aas_area_t *area;
VectorCopy(origin, org);
areanum = AAS_PointAreaNum(org);
if (!areanum)
{
org[0] += 1;
areanum = AAS_PointAreaNum(org);
if (!areanum)
{
org[1] += 1;
areanum = AAS_PointAreaNum(org);
if (!areanum)
{
org[0] -= 2;
areanum = AAS_PointAreaNum(org);
if (!areanum)
{
org[1] -= 2;
areanum = AAS_PointAreaNum(org);
} //end if
} //end if
} //end if
} //end if
//if in solid... wrrr shouldn't happen
//if (!areanum) return qfalse;
// RF, it does if they're in a monsterclip brush
if (!areanum)
{
areanum = ms_areanum;
}
//if not in a ladder area
if (!((*aasworld).areasettings[areanum].areaflags & AREA_LADDER))
{
return qfalse;
}
//if a crouch only area
if (!((*aasworld).areasettings[areanum].presencetype & PRESENCE_NORMAL))
{
return qfalse;
}
//
area = &(*aasworld).areas[areanum];
for (i = 0; i < area->numfaces; i++)
{
facenum = (*aasworld).faceindex[area->firstface + i];
side = facenum < 0;
face = &(*aasworld).faces[abs(facenum)];
//if the face isn't a ladder face
if (!(face->faceflags & FACE_LADDER))
{
continue;
}
//get the plane the face is in
plane = &(*aasworld).planes[face->planenum ^ side];
//if the origin is pretty close to the plane
if (abs(DotProduct(plane->normal, origin) - plane->dist) < 7)
{
// RF, if hanging on to the edge of a ladder, we have to account for bounding box touching
//if (AAS_PointInsideFace(abs(facenum), origin, 0.1)) return qtrue;
if (AAS_PointInsideFace(abs(facenum), origin, 2.0))
{
return qtrue;
}
} //end if
} //end for
return qfalse;
} //end of the function AAS_AgainstLadder