예제 #1
0
        TRNS,
        TRNS,TRNS,TRNS
    ),
};

/* id for user defined functions */
enum function_id {
    TEENSY_KEY,
};

/*
 * Fn action definition
 */
static const uint16_t PROGMEM fn_actions[] = {
    ACTION_FUNCTION(TEENSY_KEY),                    // FN0 - Teensy key
    ACTION_LAYER_MOMENTARY(1),                      // FN1 - switch to Layer1
    ACTION_LAYER_SET(2, ON_PRESS),                  // FN2 - push Layer2
    ACTION_LAYER_SET(3, ON_PRESS),                  // FN3 - push Layer3
    ACTION_LAYER_SET(0, ON_PRESS),                  // FN4 - push Layer0
    ACTION_LAYER_TAP_KEY(4, KC_SPC),                // FN5 - puhs Layer5, Navigation Layer
};

void action_function(keyrecord_t *event, uint8_t id, uint8_t opt)
{
    if (id == TEENSY_KEY) {
        clear_keyboard();
        print("\n\nJump to bootloader... ");
        _delay_ms(250);
        bootloader_jump(); // should not return
        print("not supported.\n");
    }
예제 #2
0
    /* 1: Cat */   
    KEYMAP(PWR,   F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9, F10, F11,   F12,PSCR,PAUS,NLCK,SLCK, \
           NO,    NO,  NO,  NO,  NO,  NO,  NO,ACL2,  NO,MS_U,BTN2, GRV,  RBRC,  NO,  UP,  NO,  NO, \
           CAPS,VOLD,VOLU,MUTE,  NO,  NO,  NO,ACL1,MS_L,MS_D,MS_R, FN3,    NO,LEFT,DOWN,RGHT,  NO, \
           LSFT,  NO,  NO,  NO,  NO,  NO,  NO,ACL0,BTN1,WH_D,WH_U,  NO,    NO,  NO,  NO,  NO,  NO, \
           LCTL,LALT, FN0,  NO, DEL,  NO,  FN2,FN3, FN1,RALT,  NO,  NO,    NO,  NO,  NO,  NO,  NO),
           
    /* 2: Key */       
    KEYMAP(PWR, F1,   F2,   F3,  F4,  F5,  F6,  F7,  F8,  F9, F10, F11,   INS,PSCR,PAUS,NLCK,SLCK, \
           NO,  NO,   NO,   NO,  NO,  NO,  NO,ACL2,  NO,MS_U,BTN2, GRV,  NUBS,  NO,  NO,  NO,  NO, \
           CAPS,VOLD,VOLU,MUTE,  NO,  NO,  NO,ACL1,MS_L,MS_D,MS_R,  NO,    NO,  NO,  NO,  NO,  NO, \
           LSFT, NO,  NO,   NO,  NO,  NO,  NO,ACL0,BTN1,WH_D,WH_U,  NO,    NO,  NO,  NO,  NO,  NO, \
           LCTL,LALT, FN0,  NO, DEL,  NO,  FN2,FN3, FN1,RALT,  NO,  NO,    NO,  NO,  NO,  NO,  NO),
                      
    /* 3: CURSOR */   
    KEYMAP(PWR,   F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9, F10, F11,   F12,PSCR,PAUS,NLCK,SLCK, \
           NO,    NO,  NO,  NO,  NO,  NO,  NO,ACL2,  NO,MS_U,BTN2, GRV,  RBRC,  NO,  UP,  NO,  NO, \
           CAPS,VOLD,VOLU,MUTE,  NO,  NO,  NO,ACL1,MS_L,MS_D,MS_R, FN3,    NO,LEFT,DOWN,RGHT,  NO, \
           LSFT,  NO,  NO,  NO,  NO,  NO,  NO,ACL0,BTN1,WH_D,WH_U,  NO,    NO,  NO,  NO,  NO,  NO, \
           LCTL,LALT, FN0,  NO, DEL,  NO,  FN2,FN3, FN1,RALT,  NO,  NO,    NO, FN4,  NO,  NO,  NO),
};

const uint16_t PROGMEM fn_actions[] = {
    ACTION_LAYER_MOMENTARY(1),
    ACTION_LAYER_TAP(2, KC_ENT),
    ACTION_MODS_KEY(MOD_LSFT, KC_1),
    ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
    ACTION_LAYER_TAP(3, KC_PENT),
    ACTION_MODS_ONESHOT(MOD_LSFT)
};
예제 #3
0
    TEENSY_KEY,
};

enum macro_id {
    PASSWORD1,
    PASSWORD2,
    PASSWORD3,
    PASSWORD4,
    PASSWORD5,
};
/*
 * Fn action definition
 */
static const uint16_t PROGMEM fn_actions[] = {
    ACTION_FUNCTION(TEENSY_KEY),                    // FN0 - Teensy key
    ACTION_LAYER_MOMENTARY(1),                      // FN1 - switch to Layer1
    ACTION_LAYER_SET(4, ON_PRESS),                  // FN2 - set Layer4
    ACTION_LAYER_MOMENTARY(5),                      // FN3 - switch to Layer5
    ACTION_LAYER_SET(0, ON_PRESS),                  // FN4 - set Layer0
    ACTION_LAYER_MOMENTARY(6),                      // FN5 - switch to Layer6
    ACTION_MACRO(PASSWORD1),                        // FN6 - password macro 1
    ACTION_MACRO(PASSWORD2),                        // FN7 - password macro 2
    ACTION_MACRO(PASSWORD3),                        // FN8 - password macro 3
    ACTION_MACRO(PASSWORD4),                        // FN9 - password macro 4
    ACTION_MACRO(PASSWORD5),                        // FN10 - password macro 5
};

void action_function(keyrecord_t *event, uint8_t id, uint8_t opt)
{
    if (id == TEENSY_KEY) {
        clear_keyboard();
예제 #4
0
파일: keymap.c 프로젝트: Kpat1/tmk_keyboard
    // numpad
    KEYMAP(NO,  NO,  NO,  NO,  NO,  NO,  NO,  TRNS,NO,  NLCK,PMNS,PAST,PSLS,NO,   \
           NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  P7,  P8,  P9,  PPLS,NO,   \
           NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  P4,  P5,  P6,  PPLS,NO,   \
           NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  P1,  P2,  P3,  PENT,NO,   \
           TRNS,TRNS,TRNS,NO,       TRNS,TRNS,     TRNS,     P0,  PDOT,PENT,NO    )
};

enum function_action {
    BACKLIGHT_BRIGHTNESS
};

void action_function(keyrecord_t* record, uint8_t id, uint8_t opt) {
    switch (id) {
        case BACKLIGHT_BRIGHTNESS:
            if (record->event.pressed)
                backlight_adjust();
            break;
    }
}

const uint16_t PROGMEM fn_actions[] = {
    ACTION_LAYER_TOGGLE(2),                // 0 toggle qwerty
    ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),    // 1 left curly brace '{'
    ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),    // 2 right curly brace '}'
    ACTION_LAYER_MOMENTARY(1),             // 3 fn layer for dvorak
    ACTION_LAYER_MOMENTARY(3),             // 4 fn layer for qwerty
    ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),    // 5 pipe '|'
    ACTION_FUNCTION(BACKLIGHT_BRIGHTNESS), // 6 light brightness
    ACTION_LAYER_TOGGLE(4)                 // 7 mouse
};
예제 #5
0
        TRNS,TRNS,TRNS
    ),

};

/* id for user defined functions */
enum function_id {
    TEENSY_KEY,
};

/*
 * Fn action definition
 */
static const uint16_t PROGMEM fn_actions[] = {
    ACTION_FUNCTION(TEENSY_KEY),                    // FN0 - Teensy key
    ACTION_LAYER_MOMENTARY(1),                      // FN1 - switch to Layer1
    ACTION_LAYER_MOMENTARY(2),                  // FN2 - set Layer2
    ACTION_LAYER_TOGGLE(3),                         // FN3 - toggle Layer3 aka Numpad layer
    ACTION_LAYER_SET(0, ON_PRESS),                  // FN4 - set Layer0
};

void action_function(keyrecord_t *event, uint8_t id, uint8_t opt)
{
    if (id == TEENSY_KEY) {
        clear_keyboard();
        print("\n\nJump to bootloader... ");
        _delay_ms(250);
        bootloader_jump(); // should not return
        print("not supported.\n");
    }
}