ACPI_STATUS
AcpiNsCheckReturnValue (
ACPI_NAMESPACE_NODE *Node,
ACPI_EVALUATE_INFO *Info,
UINT32 UserParamCount,
ACPI_STATUS ReturnStatus,
ACPI_OPERAND_OBJECT **ReturnObjectPtr)
{
ACPI_STATUS Status;
const ACPI_PREDEFINED_INFO *Predefined;
/* If not a predefined name, we cannot validate the return object */
Predefined = Info->Predefined;
if (!Predefined)
{
return (AE_OK);
}
/*
* If the method failed or did not actually return an object, we cannot
* validate the return object
*/
if ((ReturnStatus != AE_OK) &&
(ReturnStatus != AE_CTRL_RETURN_VALUE))
{
return (AE_OK);
}
/*
* Return value validation and possible repair.
*
* 1) Don't perform return value validation/repair if this feature
* has been disabled via a global option.
*
* 2) We have a return value, but if one wasn't expected, just exit,
* this is not a problem. For example, if the "Implicit Return"
* feature is enabled, methods will always return a value.
*
* 3) If the return value can be of any type, then we cannot perform
* any validation, just exit.
*/
if (AcpiGbl_DisableAutoRepair ||
(!Predefined->Info.ExpectedBtypes) ||
(Predefined->Info.ExpectedBtypes == ACPI_RTYPE_ALL))
{
return (AE_OK);
}
/*
* Check that the type of the main return object is what is expected
* for this predefined name
*/
Status = AcpiNsCheckObjectType (Info, ReturnObjectPtr,
Predefined->Info.ExpectedBtypes, ACPI_NOT_PACKAGE_ELEMENT);
if (ACPI_FAILURE (Status))
{
goto Exit;
}
/*
*
* 4) If there is no return value and it is optional, just return
* AE_OK (_WAK).
*/
if (!(*ReturnObjectPtr))
{
goto Exit;
}
/*
* For returned Package objects, check the type of all sub-objects.
* Note: Package may have been newly created by call above.
*/
if ((*ReturnObjectPtr)->Common.Type == ACPI_TYPE_PACKAGE)
{
Info->ParentPackage = *ReturnObjectPtr;
Status = AcpiNsCheckPackage (Info, ReturnObjectPtr);
if (ACPI_FAILURE (Status))
{
/* We might be able to fix some errors */
if ((Status != AE_AML_OPERAND_TYPE) &&
(Status != AE_AML_OPERAND_VALUE))
{
goto Exit;
}
}
}
/*
* The return object was OK, or it was successfully repaired above.
* Now make some additional checks such as verifying that package
* objects are sorted correctly (if required) or buffer objects have
* the correct data width (bytes vs. dwords). These repairs are
* performed on a per-name basis, i.e., the code is specific to
* particular predefined names.
*/
Status = AcpiNsComplexRepairs (Info, Node, Status, ReturnObjectPtr);
Exit:
/*
* If the object validation failed or if we successfully repaired one
* or more objects, mark the parent node to suppress further warning
* messages during the next evaluation of the same method/object.
*/
if (ACPI_FAILURE (Status) ||
(Info->ReturnFlags & ACPI_OBJECT_REPAIRED))
{
Node->Flags |= ANOBJ_EVALUATED;
}
return (Status);
}
ACPI_STATUS
AcpiNsCheckPredefinedNames (
ACPI_NAMESPACE_NODE *Node,
UINT32 UserParamCount,
ACPI_STATUS ReturnStatus,
ACPI_OPERAND_OBJECT **ReturnObjectPtr)
{
ACPI_OPERAND_OBJECT *ReturnObject = *ReturnObjectPtr;
ACPI_STATUS Status = AE_OK;
const ACPI_PREDEFINED_INFO *Predefined;
char *Pathname;
ACPI_PREDEFINED_DATA *Data;
/* Match the name for this method/object against the predefined list */
Predefined = AcpiNsCheckForPredefinedName (Node);
/* Get the full pathname to the object, for use in warning messages */
Pathname = AcpiNsGetExternalPathname (Node);
if (!Pathname)
{
return (AE_OK); /* Could not get pathname, ignore */
}
/*
* Check that the parameter count for this method matches the ASL
* definition. For predefined names, ensure that both the caller and
* the method itself are in accordance with the ACPI specification.
*/
AcpiNsCheckParameterCount (Pathname, Node, UserParamCount, Predefined);
/* If not a predefined name, we cannot validate the return object */
if (!Predefined)
{
goto Cleanup;
}
/*
* If the method failed or did not actually return an object, we cannot
* validate the return object
*/
if ((ReturnStatus != AE_OK) && (ReturnStatus != AE_CTRL_RETURN_VALUE))
{
goto Cleanup;
}
/*
* If there is no return value, check if we require a return value for
* this predefined name. Either one return value is expected, or none,
* for both methods and other objects.
*
* Exit now if there is no return object. Warning if one was expected.
*/
if (!ReturnObject)
{
if ((Predefined->Info.ExpectedBtypes) &&
(!(Predefined->Info.ExpectedBtypes & ACPI_RTYPE_NONE)))
{
ACPI_WARN_PREDEFINED ((AE_INFO, Pathname, ACPI_WARN_ALWAYS,
"Missing expected return value"));
Status = AE_AML_NO_RETURN_VALUE;
}
goto Cleanup;
}
/*
* Return value validation and possible repair.
*
* 1) Don't perform return value validation/repair if this feature
* has been disabled via a global option.
*
* 2) We have a return value, but if one wasn't expected, just exit,
* this is not a problem. For example, if the "Implicit Return"
* feature is enabled, methods will always return a value.
*
* 3) If the return value can be of any type, then we cannot perform
* any validation, just exit.
*/
if (AcpiGbl_DisableAutoRepair ||
(!Predefined->Info.ExpectedBtypes) ||
(Predefined->Info.ExpectedBtypes == ACPI_RTYPE_ALL))
{
goto Cleanup;
}
/* Create the parameter data block for object validation */
Data = ACPI_ALLOCATE_ZEROED (sizeof (ACPI_PREDEFINED_DATA));
if (!Data)
{
goto Cleanup;
}
Data->Predefined = Predefined;
Data->Node = Node;
Data->NodeFlags = Node->Flags;
Data->Pathname = Pathname;
/*
* Check that the type of the main return object is what is expected
* for this predefined name
*/
Status = AcpiNsCheckObjectType (Data, ReturnObjectPtr,
Predefined->Info.ExpectedBtypes, ACPI_NOT_PACKAGE_ELEMENT);
if (ACPI_FAILURE (Status))
{
goto Exit;
}
/*
* For returned Package objects, check the type of all sub-objects.
* Note: Package may have been newly created by call above.
*/
if ((*ReturnObjectPtr)->Common.Type == ACPI_TYPE_PACKAGE)
{
Data->ParentPackage = *ReturnObjectPtr;
Status = AcpiNsCheckPackage (Data, ReturnObjectPtr);
if (ACPI_FAILURE (Status))
{
goto Exit;
}
}
/*
* The return object was OK, or it was successfully repaired above.
* Now make some additional checks such as verifying that package
* objects are sorted correctly (if required) or buffer objects have
* the correct data width (bytes vs. dwords). These repairs are
* performed on a per-name basis, i.e., the code is specific to
* particular predefined names.
*/
Status = AcpiNsComplexRepairs (Data, Node, Status, ReturnObjectPtr);
Exit:
/*
* If the object validation failed or if we successfully repaired one
* or more objects, mark the parent node to suppress further warning
* messages during the next evaluation of the same method/object.
*/
if (ACPI_FAILURE (Status) || (Data->Flags & ACPI_OBJECT_REPAIRED))
{
Node->Flags |= ANOBJ_EVALUATED;
}
ACPI_FREE (Data);
Cleanup:
ACPI_FREE (Pathname);
return (Status);
}
ACPI_STATUS
AcpiNsCheckPredefinedNames (
ACPI_NAMESPACE_NODE *Node,
UINT32 UserParamCount,
ACPI_STATUS ReturnStatus,
ACPI_OPERAND_OBJECT **ReturnObjectPtr)
{
ACPI_OPERAND_OBJECT *ReturnObject = *ReturnObjectPtr;
ACPI_STATUS Status = AE_OK;
const ACPI_PREDEFINED_INFO *Predefined;
char *Pathname;
ACPI_PREDEFINED_DATA *Data;
/* Match the name for this method/object against the predefined list */
Predefined = AcpiNsCheckForPredefinedName (Node);
/* Get the full pathname to the object, for use in warning messages */
#ifdef ACPI_DEBUG_OUTPUT /* AB */
Pathname = AcpiNsGetExternalPathname (Node);
#else
Pathname = NULL;
#endif
if (!Pathname)
{
return (AE_OK); /* Could not get pathname, ignore */
}
/*
* Check that the parameter count for this method matches the ASL
* definition. For predefined names, ensure that both the caller and
* the method itself are in accordance with the ACPI specification.
*/
AcpiNsCheckParameterCount (Pathname, Node, UserParamCount, Predefined);
/* If not a predefined name, we cannot validate the return object */
if (!Predefined)
{
goto Cleanup;
}
/*
* If the method failed or did not actually return an object, we cannot
* validate the return object
*/
if ((ReturnStatus != AE_OK) && (ReturnStatus != AE_CTRL_RETURN_VALUE))
{
goto Cleanup;
}
/*
* If there is no return value, check if we require a return value for
* this predefined name. Either one return value is expected, or none,
* for both methods and other objects.
*
* Exit now if there is no return object. Warning if one was expected.
*/
if (!ReturnObject)
{
if ((Predefined->Info.ExpectedBtypes) &&
(!(Predefined->Info.ExpectedBtypes & ACPI_RTYPE_NONE)))
{
ACPI_WARN_PREDEFINED ((AE_INFO, Pathname, ACPI_WARN_ALWAYS,
"Missing expected return value"));
Status = AE_AML_NO_RETURN_VALUE;
}
goto Cleanup;
}
/*
* 1) We have a return value, but if one wasn't expected, just exit, this is
* not a problem. For example, if the "Implicit Return" feature is
* enabled, methods will always return a value.
*
* 2) If the return value can be of any type, then we cannot perform any
* validation, exit.
*/
if ((!Predefined->Info.ExpectedBtypes) ||
(Predefined->Info.ExpectedBtypes == ACPI_RTYPE_ALL))
{
goto Cleanup;
}
/* Create the parameter data block for object validation */
Data = ACPI_ALLOCATE_ZEROED (sizeof (ACPI_PREDEFINED_DATA));
if (!Data)
{
goto Cleanup;
}
Data->Predefined = Predefined;
Data->NodeFlags = Node->Flags;
Data->Pathname = Pathname;
/*
* Check that the type of the return object is what is expected for
* this predefined name
*/
Status = AcpiNsCheckObjectType (Data, ReturnObjectPtr,
Predefined->Info.ExpectedBtypes, ACPI_NOT_PACKAGE_ELEMENT);
if (ACPI_FAILURE (Status))
{
goto CheckValidationStatus;
}
/* For returned Package objects, check the type of all sub-objects */
if (ReturnObject->Common.Type == ACPI_TYPE_PACKAGE)
{
Status = AcpiNsCheckPackage (Data, ReturnObjectPtr);
}
CheckValidationStatus:
/*
* If the object validation failed or if we successfully repaired one
* or more objects, mark the parent node to suppress further warning
* messages during the next evaluation of the same method/object.
*/
if (ACPI_FAILURE (Status) || (Data->Flags & ACPI_OBJECT_REPAIRED))
{
Node->Flags |= ANOBJ_EVALUATED;
}
ACPI_FREE (Data);
Cleanup:
ACPI_FREE (Pathname);
return (Status);
}