void
brgphy_attach(struct device *parent, struct device *self, void *aux)
{
struct mii_softc *sc = (struct mii_softc *)self;
struct bge_softc *bge_sc = NULL;
struct bnx_softc *bnx_sc = NULL;
struct mii_attach_args *ma = aux;
struct mii_data *mii = ma->mii_data;
const struct mii_phydesc *mpd;
char *devname;
int fast_ether = 0;
devname = sc->mii_dev.dv_parent->dv_cfdata->cf_driver->cd_name;
if (strcmp(devname, "bge") == 0) {
bge_sc = mii->mii_ifp->if_softc;
if (bge_sc->bge_flags & BGE_10_100_ONLY)
fast_ether = 1;
} else if (strcmp(devname, "bnx") == 0)
bnx_sc = mii->mii_ifp->if_softc;
mpd = mii_phy_match(ma, brgphys);
printf(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2));
sc->mii_inst = mii->mii_instance;
sc->mii_phy = ma->mii_phyno;
sc->mii_model = MII_MODEL(ma->mii_id2);
sc->mii_rev = MII_REV(ma->mii_id2);
sc->mii_pdata = mii;
sc->mii_flags = ma->mii_flags;
if (sc->mii_flags & MIIF_HAVEFIBER) {
if (strcmp(devname, "bnx") == 0) {
if (BNX_CHIP_NUM(bnx_sc) == BNX_CHIP_NUM_5708)
sc->mii_funcs = &brgphy_5708s_funcs;
else if (BNX_CHIP_NUM(bnx_sc) == BNX_CHIP_NUM_5709)
sc->mii_funcs = &brgphy_5709s_funcs;
else
sc->mii_funcs = &brgphy_fiber_funcs;
} else
sc->mii_funcs = &brgphy_fiber_funcs;
} else
sc->mii_funcs = &brgphy_copper_funcs;
if (fast_ether == 1)
sc->mii_anegticks = MII_ANEGTICKS;
else
sc->mii_anegticks = MII_ANEGTICKS_GIGE;
sc->mii_flags |= MIIF_NOISOLATE | MIIF_NOLOOP;
PHY_RESET(sc);
sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
if (sc->mii_capabilities & BMSR_EXTSTAT)
sc->mii_extcapabilities = PHY_READ(sc, MII_EXTSR);
#define ADD(m, c) ifmedia_add(&mii->mii_media, (m), (c), NULL)
/* Create an instance of Ethernet media. */
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, sc->mii_inst), BMCR_ISO);
/* Add the supported media types */
if (sc->mii_flags & MIIF_HAVEFIBER) {
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_SX, IFM_FDX, sc->mii_inst),
BRGPHY_S1000 | BRGPHY_BMCR_FDX);
/*
* 2.5Gb support is a software enabled feature on the
* BCM5708S and BCM5709S controllers.
*/
if (strcmp(devname, "bnx") == 0) {
if (bnx_sc->bnx_phy_flags & BNX_PHY_2_5G_CAPABLE_FLAG)
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_2500_SX,
IFM_FDX, sc->mii_inst), 0);
}
} else {
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, 0, sc->mii_inst),
BRGPHY_S10);
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, IFM_FDX, sc->mii_inst),
BRGPHY_S10 | BRGPHY_BMCR_FDX);
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, 0, sc->mii_inst),
BRGPHY_S100);
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_FDX, sc->mii_inst),
BRGPHY_S100 | BRGPHY_BMCR_FDX);
if (fast_ether == 0) {
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_T, 0,
sc->mii_inst), BRGPHY_S1000);
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_T, IFM_FDX,
sc->mii_inst), BRGPHY_S1000 | BRGPHY_BMCR_FDX);
}
}
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_AUTO, 0, sc->mii_inst), 0);
#undef ADD
}
void
brgphy_reset(struct mii_softc *sc)
{
struct bge_softc *bge_sc = NULL;
struct bnx_softc *bnx_sc = NULL;
char *devname;
devname = sc->mii_dev.dv_parent->dv_cfdata->cf_driver->cd_name;
mii_phy_reset(sc);
switch (sc->mii_model) {
case MII_MODEL_BROADCOM_BCM5400:
brgphy_bcm5401_dspcode(sc);
break;
case MII_MODEL_BROADCOM_BCM5401:
if (sc->mii_rev == 1 || sc->mii_rev == 3)
brgphy_bcm5401_dspcode(sc);
break;
case MII_MODEL_BROADCOM_BCM5411:
brgphy_bcm5411_dspcode(sc);
break;
case MII_MODEL_xxBROADCOM_BCM5421:
brgphy_bcm5421_dspcode(sc);
break;
case MII_MODEL_xxBROADCOM_BCM54K2:
brgphy_bcm54k2_dspcode(sc);
break;
}
/* Handle any bge (NetXtreme/NetLink) workarounds. */
if (strcmp(devname, "bge") == 0) {
if (!(sc->mii_flags & MIIF_HAVEFIBER)) {
bge_sc = sc->mii_pdata->mii_ifp->if_softc;
if (bge_sc->bge_flags & BGE_PHY_ADC_BUG)
brgphy_adc_bug(sc);
if (bge_sc->bge_flags & BGE_PHY_5704_A0_BUG)
brgphy_5704_a0_bug(sc);
if (bge_sc->bge_flags & BGE_PHY_BER_BUG)
brgphy_ber_bug(sc);
else if (bge_sc->bge_flags & BGE_PHY_JITTER_BUG) {
PHY_WRITE(sc, BRGPHY_MII_AUXCTL, 0x0c00);
PHY_WRITE(sc, BRGPHY_MII_DSP_ADDR_REG,
0x000a);
if (bge_sc->bge_flags & BGE_PHY_ADJUST_TRIM) {
PHY_WRITE(sc, BRGPHY_MII_DSP_RW_PORT,
0x110b);
PHY_WRITE(sc, BRGPHY_TEST1,
BRGPHY_TEST1_TRIM_EN | 0x4);
} else {
PHY_WRITE(sc, BRGPHY_MII_DSP_RW_PORT,
0x010b);
}
PHY_WRITE(sc, BRGPHY_MII_AUXCTL, 0x0400);
}
if (bge_sc->bge_flags & BGE_PHY_CRC_BUG)
brgphy_crc_bug(sc);
/* Set Jumbo frame settings in the PHY. */
if (bge_sc->bge_flags & BGE_JUMBO_CAPABLE)
brgphy_jumbo_settings(sc);
/* Adjust output voltage */
if (sc->mii_model == MII_MODEL_BROADCOM2_BCM5906)
PHY_WRITE(sc, BRGPHY_MII_EPHY_PTEST, 0x12);
/* Enable Ethernet@Wirespeed */
if (!(bge_sc->bge_flags & BGE_NO_ETH_WIRE_SPEED))
brgphy_eth_wirespeed(sc);
/* Enable Link LED on Dell boxes */
if (bge_sc->bge_flags & BGE_NO_3LED) {
PHY_WRITE(sc, BRGPHY_MII_PHY_EXTCTL,
PHY_READ(sc, BRGPHY_MII_PHY_EXTCTL)
& ~BRGPHY_PHY_EXTCTL_3_LED);
}
}
/* Handle any bnx (NetXtreme II) workarounds. */
} else if (strcmp(devname, "bnx") == 0) {
bnx_sc = sc->mii_pdata->mii_ifp->if_softc;
if (BNX_CHIP_NUM(bnx_sc) == BNX_CHIP_NUM_5708 &&
sc->mii_flags & MIIF_HAVEFIBER) {
/* Store autoneg capabilities/results in digital block (Page 0) */
PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR, BRGPHY_5708S_DIG3_PG2);
PHY_WRITE(sc, BRGPHY_5708S_PG2_DIGCTL_3_0,
BRGPHY_5708S_PG2_DIGCTL_3_0_USE_IEEE);
PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR, BRGPHY_5708S_DIG_PG0);
/* Enable fiber mode and autodetection */
PHY_WRITE(sc, BRGPHY_5708S_PG0_1000X_CTL1,
PHY_READ(sc, BRGPHY_5708S_PG0_1000X_CTL1) |
BRGPHY_5708S_PG0_1000X_CTL1_AUTODET_EN |
BRGPHY_5708S_PG0_1000X_CTL1_FIBER_MODE);
/* Enable parallel detection */
PHY_WRITE(sc, BRGPHY_5708S_PG0_1000X_CTL2,
PHY_READ(sc, BRGPHY_5708S_PG0_1000X_CTL2) |
BRGPHY_5708S_PG0_1000X_CTL2_PAR_DET_EN);
/* Advertise 2.5G support through next page during autoneg */
if (bnx_sc->bnx_phy_flags & BNX_PHY_2_5G_CAPABLE_FLAG)
PHY_WRITE(sc, BRGPHY_5708S_ANEG_NXT_PG_XMIT1,
PHY_READ(sc, BRGPHY_5708S_ANEG_NXT_PG_XMIT1) |
BRGPHY_5708S_ANEG_NXT_PG_XMIT1_25G);
/* Increase TX signal amplitude */
if ((BNX_CHIP_ID(bnx_sc) == BNX_CHIP_ID_5708_A0) ||
(BNX_CHIP_ID(bnx_sc) == BNX_CHIP_ID_5708_B0) ||
(BNX_CHIP_ID(bnx_sc) == BNX_CHIP_ID_5708_B1)) {
PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR,
BRGPHY_5708S_TX_MISC_PG5);
PHY_WRITE(sc, BRGPHY_5708S_PG5_TXACTL1,
PHY_READ(sc, BRGPHY_5708S_PG5_TXACTL1) &
~BRGPHY_5708S_PG5_TXACTL1_VCM);
PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR,
BRGPHY_5708S_DIG_PG0);
}
/* Backplanes use special driver/pre-driver/pre-emphasis values. */
if ((bnx_sc->bnx_shared_hw_cfg & BNX_SHARED_HW_CFG_PHY_BACKPLANE) &&
(bnx_sc->bnx_port_hw_cfg & BNX_PORT_HW_CFG_CFG_TXCTL3_MASK)) {
PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR,
BRGPHY_5708S_TX_MISC_PG5);
PHY_WRITE(sc, BRGPHY_5708S_PG5_TXACTL3,
bnx_sc->bnx_port_hw_cfg &
BNX_PORT_HW_CFG_CFG_TXCTL3_MASK);
PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR,
BRGPHY_5708S_DIG_PG0);
}
} else if (BNX_CHIP_NUM(bnx_sc) == BNX_CHIP_NUM_5709 &&
sc->mii_flags & MIIF_HAVEFIBER) {
/* Select the SerDes Digital block of the AN MMD. */
PHY_WRITE(sc, BRGPHY_BLOCK_ADDR,
BRGPHY_BLOCK_ADDR_SERDES_DIG);
PHY_WRITE(sc, BRGPHY_SERDES_DIG_1000X_CTL1,
(PHY_READ(sc, BRGPHY_SERDES_DIG_1000X_CTL1) &
~BRGPHY_SD_DIG_1000X_CTL1_AUTODET) |
BRGPHY_SD_DIG_1000X_CTL1_FIBER);
if (bnx_sc->bnx_phy_flags & BNX_PHY_2_5G_CAPABLE_FLAG) {
/* Select the Over 1G block of the AN MMD. */
PHY_WRITE(sc, BRGPHY_BLOCK_ADDR,
BRGPHY_BLOCK_ADDR_OVER_1G);
/*
* Enable autoneg "Next Page" to advertise
* 2.5G support.
*/
PHY_WRITE(sc, BRGPHY_OVER_1G_UNFORMAT_PG1,
PHY_READ(sc, BRGPHY_OVER_1G_UNFORMAT_PG1) |
BRGPHY_5708S_ANEG_NXT_PG_XMIT1_25G);
}
/*
* Select the Multi-Rate Backplane Ethernet block of
* the AN MMD.
*/
PHY_WRITE(sc, BRGPHY_BLOCK_ADDR,
BRGPHY_BLOCK_ADDR_MRBE);
/* Enable MRBE speed autoneg. */
PHY_WRITE(sc, BRGPHY_MRBE_MSG_PG5_NP,
PHY_READ(sc, BRGPHY_MRBE_MSG_PG5_NP) |
BRGPHY_MRBE_MSG_PG5_NP_MBRE |
BRGPHY_MRBE_MSG_PG5_NP_T2);
/* Select the Clause 73 User B0 block of the AN MMD. */
PHY_WRITE(sc, BRGPHY_BLOCK_ADDR,
BRGPHY_BLOCK_ADDR_CL73_USER_B0);
/* Enable MRBE speed autoneg. */
PHY_WRITE(sc, BRGPHY_CL73_USER_B0_MBRE_CTL1,
BRGPHY_CL73_USER_B0_MBRE_CTL1_NP_AFT_BP |
BRGPHY_CL73_USER_B0_MBRE_CTL1_STA_MGR |
BRGPHY_CL73_USER_B0_MBRE_CTL1_ANEG);
PHY_WRITE(sc, BRGPHY_BLOCK_ADDR,
BRGPHY_BLOCK_ADDR_COMBO_IEEE0);
} else if (BNX_CHIP_NUM(bnx_sc) == BNX_CHIP_NUM_5709) {
if (BNX_CHIP_REV(bnx_sc) == BNX_CHIP_REV_Ax ||
BNX_CHIP_REV(bnx_sc) == BNX_CHIP_REV_Bx)
brgphy_disable_early_dac(sc);
/* Set Jumbo frame settings in the PHY. */
brgphy_jumbo_settings(sc);
/* Enable Ethernet@Wirespeed */
brgphy_eth_wirespeed(sc);
} else {
if (!(sc->mii_flags & MIIF_HAVEFIBER)) {
brgphy_ber_bug(sc);
/* Set Jumbo frame settings in the PHY. */
brgphy_jumbo_settings(sc);
/* Enable Ethernet@Wirespeed */
brgphy_eth_wirespeed(sc);
}
}
}
}
void
brgphy_reset_bnx(struct mii_softc *sc)
{
struct bnx_softc *bnx_sc = sc->mii_pdata->mii_ifp->if_softc;
if (BNX_CHIP_NUM(bnx_sc) == BNX_CHIP_NUM_5708 &&
sc->mii_flags & MIIF_HAVEFIBER) {
/* Store autoneg capabilities/results in digital block (Page 0) */
PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR, BRGPHY_5708S_DIG3_PG2);
PHY_WRITE(sc, BRGPHY_5708S_PG2_DIGCTL_3_0,
BRGPHY_5708S_PG2_DIGCTL_3_0_USE_IEEE);
PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR, BRGPHY_5708S_DIG_PG0);
/* Enable fiber mode and autodetection */
PHY_WRITE(sc, BRGPHY_5708S_PG0_1000X_CTL1,
PHY_READ(sc, BRGPHY_5708S_PG0_1000X_CTL1) |
BRGPHY_5708S_PG0_1000X_CTL1_AUTODET_EN |
BRGPHY_5708S_PG0_1000X_CTL1_FIBER_MODE);
/* Enable parallel detection */
PHY_WRITE(sc, BRGPHY_5708S_PG0_1000X_CTL2,
PHY_READ(sc, BRGPHY_5708S_PG0_1000X_CTL2) |
BRGPHY_5708S_PG0_1000X_CTL2_PAR_DET_EN);
/* Advertise 2.5G support through next page during autoneg */
if (bnx_sc->bnx_phy_flags & BNX_PHY_2_5G_CAPABLE_FLAG) {
PHY_WRITE(sc, BRGPHY_5708S_ANEG_NXT_PG_XMIT1,
PHY_READ(sc, BRGPHY_5708S_ANEG_NXT_PG_XMIT1) |
BRGPHY_5708S_ANEG_NXT_PG_XMIT1_25G);
}
/* Increase TX signal amplitude */
if ((BNX_CHIP_ID(bnx_sc) == BNX_CHIP_ID_5708_A0) ||
(BNX_CHIP_ID(bnx_sc) == BNX_CHIP_ID_5708_B0) ||
(BNX_CHIP_ID(bnx_sc) == BNX_CHIP_ID_5708_B1)) {
PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR,
BRGPHY_5708S_TX_MISC_PG5);
PHY_WRITE(sc, BRGPHY_5708S_PG5_TXACTL1,
PHY_READ(sc, BRGPHY_5708S_PG5_TXACTL1) &
~BRGPHY_5708S_PG5_TXACTL1_VCM);
PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR,
BRGPHY_5708S_DIG_PG0);
}
/* Backplanes use special driver/pre-driver/pre-emphasis values. */
if ((bnx_sc->bnx_shared_hw_cfg & BNX_SHARED_HW_CFG_PHY_BACKPLANE) &&
(bnx_sc->bnx_port_hw_cfg & BNX_PORT_HW_CFG_CFG_TXCTL3_MASK)) {
PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR,
BRGPHY_5708S_TX_MISC_PG5);
PHY_WRITE(sc, BRGPHY_5708S_PG5_TXACTL3,
bnx_sc->bnx_port_hw_cfg &
BNX_PORT_HW_CFG_CFG_TXCTL3_MASK);
PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR,
BRGPHY_5708S_DIG_PG0);
}
} else if (BNX_CHIP_NUM(bnx_sc) == BNX_CHIP_NUM_5709 &&
sc->mii_flags & MIIF_HAVEFIBER) {
/* Select the SerDes Digital block of the AN MMD. */
PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_SERDES_DIG);
PHY_WRITE(sc, BRGPHY_SERDES_DIG_1000X_CTL1,
(PHY_READ(sc, BRGPHY_SERDES_DIG_1000X_CTL1) &
~BRGPHY_SD_DIG_1000X_CTL1_AUTODET) |
BRGPHY_SD_DIG_1000X_CTL1_FIBER);
if (bnx_sc->bnx_phy_flags & BNX_PHY_2_5G_CAPABLE_FLAG) {
/* Select the Over 1G block of the AN MMD. */
PHY_WRITE(sc, BRGPHY_BLOCK_ADDR,
BRGPHY_BLOCK_ADDR_OVER_1G);
/*
* Enable autoneg "Next Page" to advertise
* 2.5G support.
*/
PHY_WRITE(sc, BRGPHY_OVER_1G_UNFORMAT_PG1,
PHY_READ(sc, BRGPHY_OVER_1G_UNFORMAT_PG1) |
BRGPHY_5708S_ANEG_NXT_PG_XMIT1_25G);
}
/*
* Select the Multi-Rate Backplane Ethernet block of
* the AN MMD.
*/
PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_MRBE);
/* Enable MRBE speed autoneg. */
PHY_WRITE(sc, BRGPHY_MRBE_MSG_PG5_NP,
PHY_READ(sc, BRGPHY_MRBE_MSG_PG5_NP) |
BRGPHY_MRBE_MSG_PG5_NP_MBRE |
BRGPHY_MRBE_MSG_PG5_NP_T2);
/* Select the Clause 73 User B0 block of the AN MMD. */
PHY_WRITE(sc, BRGPHY_BLOCK_ADDR,
BRGPHY_BLOCK_ADDR_CL73_USER_B0);
/* Enable MRBE speed autoneg. */
PHY_WRITE(sc, BRGPHY_CL73_USER_B0_MBRE_CTL1,
BRGPHY_CL73_USER_B0_MBRE_CTL1_NP_AFT_BP |
BRGPHY_CL73_USER_B0_MBRE_CTL1_STA_MGR |
BRGPHY_CL73_USER_B0_MBRE_CTL1_ANEG);
PHY_WRITE(sc, BRGPHY_BLOCK_ADDR,
BRGPHY_BLOCK_ADDR_COMBO_IEEE0);
} else if (BNX_CHIP_NUM(bnx_sc) == BNX_CHIP_NUM_5709) {
if (BNX_CHIP_REV(bnx_sc) == BNX_CHIP_REV_Ax ||
BNX_CHIP_REV(bnx_sc) == BNX_CHIP_REV_Bx)
brgphy_disable_early_dac(sc);
/* Set Jumbo frame settings in the PHY. */
brgphy_jumbo_settings(sc);
/* Enable Ethernet@Wirespeed */
brgphy_eth_wirespeed(sc);
} else if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) {
brgphy_ber_bug(sc);
/* Set Jumbo frame settings in the PHY. */
brgphy_jumbo_settings(sc);
/* Enable Ethernet@Wirespeed */
brgphy_eth_wirespeed(sc);
}
}
