/**
* chsc_scm_info() - store SCM information (SSI)
* @scm_area: request and response block for SSI
* @token: continuation token
*
* Returns 0 on success.
*/
int chsc_scm_info(struct chsc_scm_info *scm_area, u64 token)
{
int ccode, ret;
memset(scm_area, 0, sizeof(*scm_area));
scm_area->request.length = 0x0020;
scm_area->request.code = 0x004C;
scm_area->reqtok = token;
ccode = chsc(scm_area);
if (ccode > 0) {
ret = (ccode == 3) ? -ENODEV : -EBUSY;
goto out;
}
ret = chsc_error_from_response(scm_area->response.code);
if (ret != 0)
CIO_MSG_EVENT(2, "chsc: scm info failed (rc=%04x)\n",
scm_area->response.code);
out:
return ret;
}
static inline int
cio_start_handle_notoper(struct subchannel *sch, __u8 lpm)
{
char dbf_text[15];
if (lpm != 0)
sch->lpm &= ~lpm;
else
sch->lpm = 0;
stsch (sch->schid, &sch->schib);
CIO_MSG_EVENT(0, "cio_start: 'not oper' status for "
"subchannel 0.%x.%04x!\n", sch->schid.ssid,
sch->schid.sch_no);
sprintf(dbf_text, "no%s", sch->dev.bus_id);
CIO_TRACE_EVENT(0, dbf_text);
CIO_HEX_EVENT(0, &sch->schib, sizeof (struct schib));
return (sch->lpm ? -EACCES : -ENODEV);
}
static int css_evaluate_new_subchannel(struct subchannel_id schid, int slow)
{
struct schib schib;
if (!slow) {
/* Will be done on the slow path. */
return -EAGAIN;
}
if (stsch_err(schid, &schib)) {
/* Subchannel is not provided. */
return -ENXIO;
}
if (!css_sch_is_valid(&schib)) {
/* Unusable - ignore. */
return 0;
}
CIO_MSG_EVENT(4, "event: sch 0.%x.%04x, new\n", schid.ssid,
schid.sch_no);
return css_probe_device(schid);
}
int css_register_subchannel(struct subchannel *sch)
{
int ret;
/* Initialize the subchannel structure */
sch->dev.parent = &channel_subsystems[0]->device;
sch->dev.bus = &css_bus_type;
sch->dev.groups = default_subch_attr_groups;
/*
* We don't want to generate uevents for I/O subchannels that don't
* have a working ccw device behind them since they will be
* unregistered before they can be used anyway, so we delay the add
* uevent until after device recognition was successful.
* Note that we suppress the uevent for all subchannel types;
* the subchannel driver can decide itself when it wants to inform
* userspace of its existence.
*/
dev_set_uevent_suppress(&sch->dev, 1);
css_update_ssd_info(sch);
/* make it known to the system */
ret = css_sch_device_register(sch);
if (ret) {
CIO_MSG_EVENT(0, "Could not register sch 0.%x.%04x: %d\n",
sch->schid.ssid, sch->schid.sch_no, ret);
return ret;
}
if (!sch->driver) {
/*
* No driver matched. Generate the uevent now so that
* a fitting driver module may be loaded based on the
* modalias.
*/
dev_set_uevent_suppress(&sch->dev, 0);
kobject_uevent(&sch->dev.kobj, KOBJ_ADD);
}
return ret;
}
/**
* chp_new - register a new channel-path
* @chpid - channel-path ID
*
* Create and register data structure representing new channel-path. Return
* zero on success, non-zero otherwise.
*/
int chp_new(struct chp_id chpid)
{
struct channel_path *chp;
int ret;
if (chp_is_registered(chpid))
return 0;
chp = kzalloc(sizeof(struct channel_path), GFP_KERNEL);
if (!chp)
return -ENOMEM;
/* fill in status, etc. */
chp->chpid = chpid;
chp->state = 1;
chp->dev.parent = &channel_subsystems[chpid.cssid]->device;
chp->dev.groups = chp_attr_groups;
chp->dev.release = chp_release;
mutex_init(&chp->lock);
/* Obtain channel path description and fill it in. */
ret = chp_update_desc(chp);
if (ret)
goto out_free;
if ((chp->desc.flags & 0x80) == 0) {
ret = -ENODEV;
goto out_free;
}
/* Get channel-measurement characteristics. */
if (css_chsc_characteristics.scmc && css_chsc_characteristics.secm) {
ret = chsc_get_channel_measurement_chars(chp);
if (ret)
goto out_free;
} else {
chp->cmg = -1;
}
dev_set_name(&chp->dev, "chp%x.%02x", chpid.cssid, chpid.id);
/* make it known to the system */
ret = device_register(&chp->dev);
if (ret) {
CIO_MSG_EVENT(0, "Could not register chp%x.%02x: %d\n",
chpid.cssid, chpid.id, ret);
put_device(&chp->dev);
goto out;
}
mutex_lock(&channel_subsystems[chpid.cssid]->mutex);
if (channel_subsystems[chpid.cssid]->cm_enabled) {
ret = chp_add_cmg_attr(chp);
if (ret) {
device_unregister(&chp->dev);
mutex_unlock(&channel_subsystems[chpid.cssid]->mutex);
goto out;
}
}
channel_subsystems[chpid.cssid]->chps[chpid.id] = chp;
mutex_unlock(&channel_subsystems[chpid.cssid]->mutex);
goto out;
out_free:
kfree(chp);
out:
return ret;
}
/* Parsing the commandline for blacklist parameters, e.g. to blacklist
* bus ids 0.0.1234, 0.0.1235 and 0.0.1236, you could use any of:
* - cio_ignore=1234-1236
* - cio_ignore=0x1234-0x1235,1236
* - cio_ignore=0x1234,1235-1236
* - cio_ignore=1236 cio_ignore=1234-0x1236
* - cio_ignore=1234 cio_ignore=1236 cio_ignore=0x1235
* - cio_ignore=0.0.1234-0.0.1236
* - cio_ignore=0.0.1234,0x1235,1236
* - ...
*/
static int __init
blacklist_setup (char *str)
{
CIO_MSG_EVENT(6, "Reading blacklist parameters\n");
return blacklist_parse_parameters (str, add);
}
/*
* cio_validate_subchannel()
*
* Find out subchannel type and initialize struct subchannel.
* Return codes:
* SUBCHANNEL_TYPE_IO for a normal io subchannel
* SUBCHANNEL_TYPE_CHSC for a chsc subchannel
* SUBCHANNEL_TYPE_MESSAGE for a messaging subchannel
* SUBCHANNEL_TYPE_ADM for a adm(?) subchannel
* -ENXIO for non-defined subchannels
* -ENODEV for subchannels with invalid device number or blacklisted devices
*/
int
cio_validate_subchannel (struct subchannel *sch, unsigned int irq)
{
char dbf_txt[15];
int ccode;
sprintf (dbf_txt, "valsch%x", irq);
CIO_TRACE_EVENT (4, dbf_txt);
/* Nuke all fields. */
memset(sch, 0, sizeof(struct subchannel));
spin_lock_init(&sch->lock);
/* Set a name for the subchannel */
snprintf (sch->dev.bus_id, BUS_ID_SIZE, "0.0.%04x", irq);
/*
* The first subchannel that is not-operational (ccode==3)
* indicates that there aren't any more devices available.
*/
sch->irq = irq;
ccode = stsch (irq, &sch->schib);
if (ccode)
return -ENXIO;
/* Copy subchannel type from path management control word. */
sch->st = sch->schib.pmcw.st;
/*
* ... just being curious we check for non I/O subchannels
*/
if (sch->st != 0) {
CIO_DEBUG(KERN_INFO, 0,
"Subchannel %04X reports "
"non-I/O subchannel type %04X\n",
sch->irq, sch->st);
/* We stop here for non-io subchannels. */
return sch->st;
}
/* Initialization for io subchannels. */
if (!sch->schib.pmcw.dnv)
/* io subchannel but device number is invalid. */
return -ENODEV;
/* Devno is valid. */
if (is_blacklisted (sch->schib.pmcw.dev)) {
/*
* This device must not be known to Linux. So we simply
* say that there is no device and return ENODEV.
*/
CIO_MSG_EVENT(0, "Blacklisted device detected "
"at devno %04X\n", sch->schib.pmcw.dev);
return -ENODEV;
}
sch->opm = 0xff;
chsc_validate_chpids(sch);
sch->lpm = sch->schib.pmcw.pim &
sch->schib.pmcw.pam &
sch->schib.pmcw.pom &
sch->opm;
CIO_DEBUG(KERN_INFO, 0,
"Detected device %04X on subchannel %04X"
" - PIM = %02X, PAM = %02X, POM = %02X\n",
sch->schib.pmcw.dev, sch->irq, sch->schib.pmcw.pim,
sch->schib.pmcw.pam, sch->schib.pmcw.pom);
/*
* We now have to initially ...
* ... set "interruption subclass"
* ... enable "concurrent sense"
* ... enable "multipath mode" if more than one
* CHPID is available. This is done regardless
* whether multiple paths are available for us.
*/
sch->schib.pmcw.isc = 3; /* could be smth. else */
sch->schib.pmcw.csense = 1; /* concurrent sense */
sch->schib.pmcw.ena = 0;
if ((sch->lpm & (sch->lpm - 1)) != 0)
sch->schib.pmcw.mp = 1; /* multipath mode */
return 0;
}
/**
* cio_validate_subchannel - basic validation of subchannel
* @sch: subchannel structure to be filled out
* @schid: subchannel id
*
* Find out subchannel type and initialize struct subchannel.
* Return codes:
* 0 on success
* -ENXIO for non-defined subchannels
* -ENODEV for invalid subchannels or blacklisted devices
* -EIO for subchannels in an invalid subchannel set
*/
int cio_validate_subchannel(struct subchannel *sch, struct subchannel_id schid)
{
char dbf_txt[15];
int ccode;
int err;
sprintf(dbf_txt, "valsch%x", schid.sch_no);
CIO_TRACE_EVENT(4, dbf_txt);
/* Nuke all fields. */
memset(sch, 0, sizeof(struct subchannel));
sch->schid = schid;
if (cio_is_console(schid)) {
sch->lock = cio_get_console_lock();
} else {
err = cio_create_sch_lock(sch);
if (err)
goto out;
}
mutex_init(&sch->reg_mutex);
/* Set a name for the subchannel */
if (cio_is_console(schid))
sch->dev.init_name = cio_get_console_sch_name(schid);
else
dev_set_name(&sch->dev, "0.%x.%04x", schid.ssid, schid.sch_no);
/*
* The first subchannel that is not-operational (ccode==3)
* indicates that there aren't any more devices available.
* If stsch gets an exception, it means the current subchannel set
* is not valid.
*/
ccode = stsch_err (schid, &sch->schib);
if (ccode) {
err = (ccode == 3) ? -ENXIO : ccode;
goto out;
}
/* Copy subchannel type from path management control word. */
sch->st = sch->schib.pmcw.st;
switch (sch->st) {
case SUBCHANNEL_TYPE_IO:
err = cio_validate_io_subchannel(sch);
break;
case SUBCHANNEL_TYPE_MSG:
err = cio_validate_msg_subchannel(sch);
break;
default:
err = 0;
}
if (err)
goto out;
CIO_MSG_EVENT(4, "Subchannel 0.%x.%04x reports subchannel type %04X\n",
sch->schid.ssid, sch->schid.sch_no, sch->st);
return 0;
out:
if (!cio_is_console(schid))
kfree(sch->lock);
sch->lock = NULL;
return err;
}
static int
css_evaluate_subchannel(int irq, int slow)
{
int event, ret, disc;
struct subchannel *sch;
unsigned long flags;
sch = get_subchannel_by_schid(irq);
disc = sch ? device_is_disconnected(sch) : 0;
if (disc && slow) {
if (sch)
put_device(&sch->dev);
return 0; /* Already processed. */
}
/*
* We've got a machine check, so running I/O won't get an interrupt.
* Kill any pending timers.
*/
if (sch)
device_kill_pending_timer(sch);
if (!disc && !slow) {
if (sch)
put_device(&sch->dev);
return -EAGAIN; /* Will be done on the slow path. */
}
event = css_get_subchannel_status(sch, irq);
CIO_MSG_EVENT(4, "Evaluating schid %04x, event %d, %s, %s path.\n",
irq, event, sch?(disc?"disconnected":"normal"):"unknown",
slow?"slow":"fast");
switch (event) {
case CIO_NO_PATH:
case CIO_GONE:
if (!sch) {
/* Never used this subchannel. Ignore. */
ret = 0;
break;
}
if (disc && (event == CIO_NO_PATH)) {
/*
* Uargh, hack again. Because we don't get a machine
* check on configure on, our path bookkeeping can
* be out of date here (it's fine while we only do
* logical varying or get chsc machine checks). We
* need to force reprobing or we might miss devices
* coming operational again. It won't do harm in real
* no path situations.
*/
spin_lock_irqsave(&sch->lock, flags);
device_trigger_reprobe(sch);
spin_unlock_irqrestore(&sch->lock, flags);
ret = 0;
break;
}
if (sch->driver && sch->driver->notify &&
sch->driver->notify(&sch->dev, event)) {
cio_disable_subchannel(sch);
device_set_disconnected(sch);
ret = 0;
break;
}
/*
* Unregister subchannel.
* The device will be killed automatically.
*/
cio_disable_subchannel(sch);
device_unregister(&sch->dev);
/* Reset intparm to zeroes. */
sch->schib.pmcw.intparm = 0;
cio_modify(sch);
put_device(&sch->dev);
ret = 0;
break;
case CIO_REVALIDATE:
/*
* Revalidation machine check. Sick.
* We don't notify the driver since we have to throw the device
* away in any case.
*/
if (!disc) {
device_unregister(&sch->dev);
/* Reset intparm to zeroes. */
sch->schib.pmcw.intparm = 0;
cio_modify(sch);
put_device(&sch->dev);
ret = css_probe_device(irq);
} else {
/*
* We can't immediately deregister the disconnected
* device since it might block.
*/
spin_lock_irqsave(&sch->lock, flags);
device_trigger_reprobe(sch);
spin_unlock_irqrestore(&sch->lock, flags);
ret = 0;
}
break;
case CIO_OPER:
if (disc) {
spin_lock_irqsave(&sch->lock, flags);
/* Get device operational again. */
device_trigger_reprobe(sch);
spin_unlock_irqrestore(&sch->lock, flags);
}
ret = sch ? 0 : css_probe_device(irq);
break;
default:
BUG();
ret = 0;
}
return ret;
}
