bool Isp_initSpi(void)
{
#if defined(__PIC32MZ__)
// 1. SDI1
SDI1Rbits.SDI1R = 0x0b; //SDI1 = RPD14
ANSELDbits.ANSD14 = 0; // D14 not anolog
PORTDbits.RD14 = 1; // input
TRISDbits.TRISD14 = 1; // pull-up
// 2. SDO1
RPD10Rbits.RPD10R = 0x05; //SDO1 = RPD10
// 3. CS
ANSELEbits.ANSE9 = 0; // E9 not anolog
TRISEbits.TRISE9 = 0; // pull-up
clkObject.peripheralClock = 200000000/6; //200000000/6;
#endif
drvSPIObject = DRV_SPI_Initialize(DRV_SPI_INDEX_0, (SYS_MODULE_INIT *)&initConf_1);
drvSPIHandle = DRV_SPI_Open( DRV_SPI_INDEX_0, DRV_IO_INTENT_BLOCKING );
if( drvSPIHandle== NULL )
{
//SYS_ASSERT(false, "SPI Open error");
return false;
}
// Without the SPIFE bit set we can't run at 20MHz. Not sure why as this bit
// seems like it is only applicable in SPI frame mode, which we are not using.
// SPI1CONSET = 0x00000200;
return true;
}
bool DRV_WIFI_SpiInit(void)
{
drvSPIHandle = DRV_SPI_Open(DRV_WIFI_SPI_INDEX, DRV_IO_INTENT_READWRITE|DRV_IO_INTENT_BLOCKING);
if (drvSPIHandle == (DRV_SPI_BUFFER_HANDLE)NULL)
{
//WDRV_ASSERT(false, "SPI open error");
return false;
}
// Without the SPIFE bit set we can't run at 20MHz. Not sure why as this bit
// seems like it is only applicable in SPI frame mode, which we are not using.
//SPI1CONSET = 0x00000200;
return true;
}
static bool Spi_Init(void)
{
if (s_SpiHandle == NULL) {
s_SpiHandle = DRV_SPI_Open(WDRV_SPI_INDEX, DRV_IO_INTENT_READWRITE|DRV_IO_INTENT_BLOCKING);
if (s_SpiHandle == (DRV_SPI_BUFFER_HANDLE)NULL)
{
WDRV_ASSERT(false, "SPI init failed");
return false;
}
}
WDRV_SemInit(&g_wdrv_priv.dmaTxSync);
WDRV_SemInit(&g_wdrv_priv.dmaRxSync);
return true;
}
bool Isp_initSpi(void)
{
#if defined (__32MZ2048ECH144__)
#if defined(MRF24W_IN_SPI1)
// 1. SDI1
SDI1Rbits.SDI1R = 0x0b; //SDI1 = RPD14
PLIB_PORTS_PinModePerPortSelect(PORTS_ID_0, PORT_CHANNEL_D,PORTS_BIT_POS_14,PORTS_PIN_MODE_DIGITAL); // D14 not anolog
PLIB_PORTS_PinDirectionInputSet(PORTS_ID_0, PORT_CHANNEL_D,PORTS_BIT_POS_14); //D14 input
// //PORTDbits.RD14 = 1; // pull-up
// 2. SDO1
RPD10Rbits.RPD10R = 0x05; //SDO1 = RPD10
#elif defined(MRF24W_IN_SPI4)
// 1. SDI4 = RG7
SDI4Rbits.SDI4R = 0x01; //SDI4 = RPG7
PLIB_PORTS_PinModePerPortSelect(PORTS_ID_0, PORT_CHANNEL_G,PORTS_BIT_POS_7,PORTS_PIN_MODE_DIGITAL); // G7 not anolog
PLIB_PORTS_PinDirectionInputSet(PORTS_ID_0, PORT_CHANNEL_G,PORTS_BIT_POS_7); //G7 input
//PORTGbits.RG7 = 1; // pull-up
// 2. SDO4 =RB3
PLIB_PORTS_PinModePerPortSelect(PORTS_ID_0, PORT_CHANNEL_B,PORTS_BIT_POS_3,PORTS_PIN_MODE_DIGITAL); // B3 not anolog
RPB3Rbits.RPB3R = 0x08; //RPB8 = SDO4
#endif
// CS port not analog
PLIB_PORTS_PinModePerPortSelect(PORTS_ID_0, WF_CS_PORT_CHANNEL,WF_CS_BIT_POS,PORTS_PIN_MODE_DIGITAL);
#endif
drvSPIObject = DRV_SPI_Initialize(DRV_SPI_INDEX_0, (SYS_MODULE_INIT *)&initConf_1);
drvSPIHandle = DRV_SPI_Open( DRV_SPI_INDEX_0, DRV_IO_INTENT_BLOCKING );
if( drvSPIHandle== NULL )
{
//SYS_ASSERT(false, "SPI Open error");
return false;
}
// Without the SPIFE bit set we can't run at 20MHz. Not sure why as this bit
// seems like it is only applicable in SPI frame mode, which we are not using.
SPI1CONSET = 0x00000200;
return true;
}
bool DRV_WIFI_SpiInit()
{
#if defined(PLIB_PORTS_ExistsPortsDirection)
if (PLIB_PORTS_ExistsPortsDirection(PORTS_ID_0))
{
WF_CS_Init();
}
#endif
WF_CS_Deassert(); // Disable chip select before initialization
drvSPIHandle = DRV_SPI_Open(DRV_WIFI_SPI_INDEX, DRV_IO_INTENT_READWRITE|DRV_IO_INTENT_BLOCKING);
if (drvSPIHandle == (DRV_SPI_BUFFER_HANDLE)NULL)
{
//DRV_WIFI_ASSERT(false, "SPI open error");
return false;
}
return true;
}
void APP_Tasks ( void )
{
switch ( appData.state )
{
case APP_STATE_INIT:
{
if(appData.status.ready)
{
appData.state = APP_STATE_RUN;
break;
}
if(appData.status.SPIReady==false)
{
appData.LED.SPIHandle = DRV_SPI_Open(DRV_SPI_INDEX_0,
DRV_IO_INTENT_EXCLUSIVE |
DRV_IO_INTENT_WRITE |
DRV_IO_INTENT_NONBLOCKING
);
appData.status.SPIReady = ( DRV_HANDLE_INVALID != appData.LED.SPIHandle );
}
if(appData.status.TimerDriverReady==false)
{
appData.timer.driver.handle = DRV_TMR_Open(
DRV_TMR_INDEX_0,
DRV_IO_INTENT_READWRITE|DRV_IO_INTENT_EXCLUSIVE);
appData.status.TimerDriverReady =
(appData.timer.driver.handle != DRV_HANDLE_INVALID);
}
if(appData.status.SPIReady && appData.status.TimerDriverReady)
{
appData.LED.start=0;
appData.state=APP_STATE_TIMER_START;
}
break;
}
case APP_STATE_TIMER_START:
{
if(DRV_TMR_AlarmRegister(appData.timer.driver.handle,
DRV_TMR_CounterFrequencyGet(appData.timer.driver.handle)/25,
true,
0,
&TimerCallback)
)
{
if(DRV_TMR_Start(appData.timer.driver.handle))
{
appData.status.ready=true;
appData.state=APP_STATE_RUN;
}
}
break;
}
case APP_STATE_RUN:
{
if(!SendingToStrip())
{
APP_TASKS_ACTIVITY_SET;
PopulateStrip(&appData.LED);
appData.state=APP_STATE_SEND_STRIP;
}
break;
}
case APP_STATE_SEND_STRIP:
{
if(appData.status.readyForNext)
{
appData.status.readyForNext=false;
SendLEDStrip(&appData.LED);
/* write each pixel out to the SPI buffer */
/* give the data over to the SPI system to send to the LED strip */
appData.state=APP_STATE_WAIT;
APP_TASKS_ACTIVITY_CLEAR;
}
break;
}
case APP_STATE_WAIT:
{
/* wait for the SPI transaction to finish. */
if(SendingToStrip())
{
break;
}
appData.LED.start++;
appData.state=APP_STATE_RUN;
break;
}
case APP_STATE_ERROR:
{
break;
}
default:
{
/* shouldn't get here. */
APP_Initialize();
break;
}
}
if(appData.activityLED.blinkCount++>appData.activityLED.interval)
{
mActivityLEDInvert();
appData.activityLED.blinkCount=0;
}
}
