void CBoot::Load_FST(bool _bIsWii)
{
if (!DVDInterface::VolumeIsValid())
return;
const DiscIO::IVolume& volume = DVDInterface::GetVolume();
// copy first 32 bytes of disc to start of Mem 1
DVDRead(/*offset*/ 0, /*address*/ 0, /*length*/ 0x20, false);
// copy of game id
Memory::Write_U32(Memory::Read_U32(0x0000), 0x3180);
u32 shift = 0;
if (_bIsWii)
shift = 2;
u32 fst_offset = 0;
u32 fst_size = 0;
u32 max_fst_size = 0;
volume.ReadSwapped(0x0424, &fst_offset, _bIsWii);
volume.ReadSwapped(0x0428, &fst_size, _bIsWii);
volume.ReadSwapped(0x042c, &max_fst_size, _bIsWii);
u32 arena_high = ROUND_DOWN(0x817FFFFF - (max_fst_size << shift), 0x20);
Memory::Write_U32(arena_high, 0x00000034);
// load FST
DVDRead(fst_offset << shift, arena_high, fst_size << shift, _bIsWii);
Memory::Write_U32(arena_high, 0x00000038);
Memory::Write_U32(max_fst_size << shift, 0x0000003c);
}
void ExecuteCommand(UDICR& _DICR)
{
// _dbg_assert_(DVDINTERFACE, _DICR.RW == 0); // only DVD to Memory
int GCAM = ((SConfig::GetInstance().m_SIDevice[0] == SIDEVICE_AM_BASEBOARD)
&& (SConfig::GetInstance().m_EXIDevice[2] == EXIDEVICE_AM_BASEBOARD))
? 1 : 0;
if (GCAM)
{
ERROR_LOG(DVDINTERFACE,
"DVD: %08x, %08x, %08x, DMA=addr:%08x,len:%08x,ctrl:%08x",
m_DICMDBUF[0].Hex, m_DICMDBUF[1].Hex, m_DICMDBUF[2].Hex,
m_DIMAR.Hex, m_DILENGTH.Hex, m_DICR.Hex);
// decrypt command. But we have a zero key, that simplifies things a lot.
// If you get crazy dvd command errors, make sure 0x80000000 - 0x8000000c is zero'd
m_DICMDBUF[0].Hex <<= 24;
}
switch (m_DICMDBUF[0].CMDBYTE0)
{
case DVDLowInquiry:
if (GCAM)
{
// 0x29484100...
// was 21 i'm not entirely sure about this, but it works well.
m_DIIMMBUF.Hex = 0x21000000;
}
else
{
// small safety check, dunno if it's needed
if ((m_DICMDBUF[1].Hex == 0) && (m_DILENGTH.Length == 0x20))
{
u8* driveInfo = Memory::GetPointer(m_DIMAR.Address);
// gives the correct output in GCOS - 06 2001/08 (61)
// there may be other stuff missing ?
driveInfo[4] = 0x20;
driveInfo[5] = 0x01;
driveInfo[6] = 0x06;
driveInfo[7] = 0x08;
driveInfo[8] = 0x61;
// Just for fun
INFO_LOG(DVDINTERFACE, "Drive Info: %02x %02x%02x/%02x (%02x)",
driveInfo[6], driveInfo[4], driveInfo[5], driveInfo[7], driveInfo[8]);
}
}
break;
// "Set Extension"...not sure what it does
case 0x55:
INFO_LOG(DVDINTERFACE, "SetExtension");
break;
// DMA Read from Disc
case 0xA8:
if (g_bDiscInside)
{
switch (m_DICMDBUF[0].CMDBYTE3)
{
case 0x00: // Read Sector
{
u32 iDVDOffset = m_DICMDBUF[1].Hex << 2;
DEBUG_LOG(DVDINTERFACE, "Read: DVDOffset=%08x, DMABuffer=%08x, SrcLength=%08x, DMALength=%08x",
iDVDOffset, m_DIMAR.Address, m_DICMDBUF[2].Hex, m_DILENGTH.Length);
_dbg_assert_(DVDINTERFACE, m_DICMDBUF[2].Hex == m_DILENGTH.Length);
if (GCAM)
{
if (iDVDOffset & 0x80000000) // read request to hardware buffer
{
u32 len = m_DILENGTH.Length / 4;
switch (iDVDOffset)
{
case 0x80000000:
ERROR_LOG(DVDINTERFACE, "GC-AM: READ MEDIA BOARD STATUS (80000000)");
for (u32 i = 0; i < len; i++)
Memory::Write_U32(0, m_DIMAR.Address + i * 4);
break;
case 0x80000040:
ERROR_LOG(DVDINTERFACE, "GC-AM: READ MEDIA BOARD STATUS (2) (80000040)");
for (u32 i = 0; i < len; i++)
Memory::Write_U32(~0, m_DIMAR.Address + i * 4);
Memory::Write_U32(0x00000020, m_DIMAR.Address); // DIMM SIZE, LE
Memory::Write_U32(0x4743414D, m_DIMAR.Address + 4); // GCAM signature
break;
case 0x80000120:
ERROR_LOG(DVDINTERFACE, "GC-AM: READ FIRMWARE STATUS (80000120)");
for (u32 i = 0; i < len; i++)
Memory::Write_U32(0x01010101, m_DIMAR.Address + i * 4);
break;
case 0x80000140:
ERROR_LOG(DVDINTERFACE, "GC-AM: READ FIRMWARE STATUS (80000140)");
for (u32 i = 0; i < len; i++)
Memory::Write_U32(0x01010101, m_DIMAR.Address + i * 4);
break;
case 0x84000020:
ERROR_LOG(DVDINTERFACE, "GC-AM: READ MEDIA BOARD STATUS (1) (84000020)");
for (u32 i = 0; i < len; i++)
Memory::Write_U32(0x00000000, m_DIMAR.Address + i * 4);
break;
default:
ERROR_LOG(DVDINTERFACE, "GC-AM: UNKNOWN MEDIA BOARD LOCATION %x", iDVDOffset);
break;
}
break;
}
else if ((iDVDOffset == 0x1f900000) || (iDVDOffset == 0x1f900020))
{
ERROR_LOG(DVDINTERFACE, "GC-AM: READ MEDIA BOARD COMM AREA (1f900020)");
memcpy(Memory::GetPointer(m_DIMAR.Address), media_buffer + iDVDOffset - 0x1f900000, m_DILENGTH.Length);
for (u32 i = 0; i < m_DILENGTH.Length; i += 4)
ERROR_LOG(DVDINTERFACE, "GC-AM: %08x", Memory::Read_U32(m_DIMAR.Address + i));
break;
}
}
// Here is the actual Disk Reading
if (!DVDRead(iDVDOffset, m_DIMAR.Address, m_DILENGTH.Length))
{
PanicAlertT("Cant read from DVD_Plugin - DVD-Interface: Fatal Error");
}
}
break;
case 0x40: // Read DiscID
_dbg_assert_(DVDINTERFACE, m_DICMDBUF[1].Hex == 0);
_dbg_assert_(DVDINTERFACE, m_DICMDBUF[2].Hex == m_DILENGTH.Length);
_dbg_assert_(DVDINTERFACE, m_DILENGTH.Length == 0x20);
if (!DVDRead(m_DICMDBUF[1].Hex, m_DIMAR.Address, m_DILENGTH.Length))
PanicAlertT("Cant read from DVD_Plugin - DVD-Interface: Fatal Error");
WARN_LOG(DVDINTERFACE, "Read DiscID %08x", Memory::Read_U32(m_DIMAR.Address));
break;
default:
_dbg_assert_msg_(DVDINTERFACE, 0, "Unknown Read Subcommand");
break;
}
}
else
{
// there is no disc to read
_DICR.TSTART = 0;
m_DILENGTH.Length = 0;
g_ErrorCode = ERROR_NO_DISK | ERROR_COVER_H;
GenerateDIInterrupt(INT_DEINT);
return;
}
break;
// GC-AM
case 0xAA:
if (GCAM)
{
ERROR_LOG(DVDINTERFACE, "GC-AM: 0xAA, DMABuffer=%08x, DMALength=%08x", m_DIMAR.Address, m_DILENGTH.Length);
u32 iDVDOffset = m_DICMDBUF[1].Hex << 2;
unsigned int len = m_DILENGTH.Length;
int offset = iDVDOffset - 0x1F900000;
/*
if (iDVDOffset == 0x84800000)
{
ERROR_LOG(DVDINTERFACE, "firmware upload");
}
else*/
if ((offset < 0) || ((offset + len) > 0x40) || len > 0x40)
{
u32 addr = m_DIMAR.Address;
if (iDVDOffset == 0x84800000) {
ERROR_LOG(DVDINTERFACE, "FIRMWARE UPLOAD");
} else {
ERROR_LOG(DVDINTERFACE, "ILLEGAL MEDIA WRITE");
}
while (len >= 4)
{
ERROR_LOG(DVDINTERFACE, "GC-AM Media Board WRITE (0xAA): %08x: %08x", iDVDOffset, Memory::Read_U32(addr));
addr += 4;
len -= 4;
iDVDOffset += 4;
}
}
else
{
u32 addr = m_DIMAR.Address;
memcpy(media_buffer + offset, Memory::GetPointer(addr), len);
while (len >= 4)
{
ERROR_LOG(DVDINTERFACE, "GC-AM Media Board WRITE (0xAA): %08x: %08x", iDVDOffset, Memory::Read_U32(addr));
addr += 4;
len -= 4;
iDVDOffset += 4;
}
}
}
break;
// Seek (immediate)
case DVDLowSeek:
if (!GCAM)
{
// We don't care :)
DEBUG_LOG(DVDINTERFACE, "Seek: offset=%08x (ignoring)", m_DICMDBUF[1].Hex << 2);
}
else
{
memset(media_buffer, 0, 0x20);
media_buffer[0] = media_buffer[0x20]; // ID
media_buffer[2] = media_buffer[0x22];
media_buffer[3] = media_buffer[0x23] | 0x80;
int cmd = (media_buffer[0x23]<<8)|media_buffer[0x22];
ERROR_LOG(DVDINTERFACE, "GC-AM: execute buffer, cmd=%04x", cmd);
switch (cmd)
{
case 0x00:
media_buffer[4] = 1;
break;
case 0x1:
media_buffer[7] = 0x20; // DIMM Size
break;
case 0x100:
{
// urgh
static int percentage = 0;
static int status = 0;
percentage++;
if (percentage > 100)
{
status++;
percentage = 0;
}
media_buffer[4] = status;
/* status:
0 - "Initializing media board. Please wait.."
1 - "Checking network. Please wait..."
2 - "Found a system disc. Insert a game disc"
3 - "Testing a game program. %d%%"
4 - "Loading a game program. %d%%"
5 - go
6 - error xx
*/
media_buffer[8] = percentage;
media_buffer[4] = 0x05;
media_buffer[8] = 0x64;
break;
}
case 0x101:
media_buffer[4] = 3; // version
media_buffer[5] = 3;
media_buffer[6] = 1; // xxx
media_buffer[8] = 1;
media_buffer[16] = 0xFF;
media_buffer[17] = 0xFF;
media_buffer[18] = 0xFF;
media_buffer[19] = 0xFF;
break;
case 0x102: // get error code
media_buffer[4] = 1; // 0: download incomplete (31), 1: corrupted, other error 1
media_buffer[5] = 0;
break;
case 0x103:
memcpy(media_buffer + 4, "A89E27A50364511", 15); // serial
break;
#if 0
case 0x301: // unknown
memcpy(media_buffer + 4, media_buffer + 0x24, 0x1c);
break;
case 0x302:
break;
#endif
default:
ERROR_LOG(DVDINTERFACE, "GC-AM: execute buffer (unknown)");
break;
}
memset(media_buffer + 0x20, 0, 0x20);
m_DIIMMBUF.Hex = 0x66556677; // just a random value that works.
}
break;
case DVDLowOffset:
DEBUG_LOG(DVDINTERFACE, "DVDLowOffset: ignoring...");
break;
// Request Error Code
case DVDLowRequestError:
ERROR_LOG(DVDINTERFACE, "Requesting error... (0x%08x)", g_ErrorCode);
m_DIIMMBUF.Hex = g_ErrorCode;
break;
// Audio Stream (Immediate)
// m_DICMDBUF[0].CMDBYTE1 = subcommand
// m_DICMDBUF[1].Hex << 2 = offset on disc
// m_DICMDBUF[2].Hex = Length of the stream
case 0xE1:
{
u32 pos = m_DICMDBUF[1].Hex << 2;
u32 length = m_DICMDBUF[2].Hex;
// Start playing
if (!g_bStream && m_DICMDBUF[0].CMDBYTE1 == 0 && pos != 0 && length != 0)
{
AudioPos = pos;
CurrentStart = pos;
CurrentLength = length;
NGCADPCM::InitFilter();
g_bStream = true;
}
LoopStart = pos;
LoopLength = length;
g_bStream = (m_DICMDBUF[0].CMDBYTE1 == 0); // This command can start/stop the stream
// Stop stream
if (m_DICMDBUF[0].CMDBYTE1 == 1)
{
AudioPos = 0;
LoopStart = 0;
LoopLength = 0;
CurrentStart = 0;
CurrentLength = 0;
}
WARN_LOG(DVDINTERFACE, "(Audio) Stream subcmd = %08x offset = %08x length=%08x",
m_DICMDBUF[0].Hex, m_DICMDBUF[1].Hex << 2, m_DICMDBUF[2].Hex);
}
break;
// Request Audio Status (Immediate)
case 0xE2:
{
switch (m_DICMDBUF[0].CMDBYTE1)
{
case 0x00: // Returns streaming status
m_DIIMMBUF.Hex = (AudioPos == 0) ? 0 : 1;
break;
case 0x01: // Returns the current offset
if (g_bStream)
m_DIIMMBUF.Hex = (AudioPos - CurrentStart) >> 2;
else
m_DIIMMBUF.Hex = 0;
break;
case 0x02: // Returns the start offset
if (g_bStream)
m_DIIMMBUF.Hex = CurrentStart >> 2;
else
m_DIIMMBUF.Hex = 0;
break;
case 0x03: // Returns the total length
if (g_bStream)
m_DIIMMBUF.Hex = CurrentLength;
else
m_DIIMMBUF.Hex = 0;
break;
default:
WARN_LOG(DVDINTERFACE, "(Audio): Subcommand: %02x Request Audio status %s", m_DICMDBUF[0].CMDBYTE1, g_bStream? "on":"off");
break;
}
}
// __________________________________________________________________________________________________
// GameCube Bootstrap 2 HLE:
// copy the apploader to 0x81200000
// execute the apploader, function by function, using the above utility.
bool CBoot::EmulatedBS2_GC(bool skipAppLoader)
{
INFO_LOG(BOOT, "Faking GC BS2...");
// Set up MSR and the BAT SPR registers.
UReg_MSR& m_MSR = ((UReg_MSR&)PowerPC::ppcState.msr);
m_MSR.FP = 1;
m_MSR.DR = 1;
m_MSR.IR = 1;
m_MSR.EE = 1;
PowerPC::ppcState.spr[SPR_IBAT0U] = 0x80001fff;
PowerPC::ppcState.spr[SPR_IBAT0L] = 0x00000002;
PowerPC::ppcState.spr[SPR_DBAT0U] = 0x80001fff;
PowerPC::ppcState.spr[SPR_DBAT0L] = 0x00000002;
PowerPC::ppcState.spr[SPR_DBAT1U] = 0xc0001fff;
PowerPC::ppcState.spr[SPR_DBAT1L] = 0x0000002a;
// Write necessary values
// Here we write values to memory that the apploader does not take care of. Game info goes
// to 0x80000000 according to YAGCD 4.2.
// It's possible to boot DOL and ELF files without a disc inserted
if (DVDInterface::VolumeIsValid())
DVDRead(/*offset*/ 0x00000000, /*address*/ 0x00000000, 0x20, false); // write disc info
PowerPC::HostWrite_U32(0x0D15EA5E,
0x80000020); // Booted from bootrom. 0xE5207C22 = booted from jtag
PowerPC::HostWrite_U32(Memory::REALRAM_SIZE,
0x80000028); // Physical Memory Size (24MB on retail)
// TODO determine why some games fail when using a retail ID. (Seem to take different EXI paths,
// see Ikaruga for example)
PowerPC::HostWrite_U32(
0x10000006,
0x8000002C); // Console type - DevKit (retail ID == 0x00000003) see YAGCD 4.2.1.1.2
PowerPC::HostWrite_U32(SConfig::GetInstance().bNTSC ? 0 : 1,
0x800000CC); // Fake the VI Init of the IPL (YAGCD 4.2.1.4)
PowerPC::HostWrite_U32(0x01000000, 0x800000d0); // ARAM Size. 16MB main + 4/16/32MB external
// (retail consoles have no external ARAM)
PowerPC::HostWrite_U32(0x09a7ec80, 0x800000F8); // Bus Clock Speed
PowerPC::HostWrite_U32(0x1cf7c580, 0x800000FC); // CPU Clock Speed
PowerPC::HostWrite_U32(0x4c000064, 0x80000300); // Write default DFI Handler: rfi
PowerPC::HostWrite_U32(0x4c000064, 0x80000800); // Write default FPU Handler: rfi
PowerPC::HostWrite_U32(0x4c000064, 0x80000C00); // Write default Syscall Handler: rfi
PowerPC::HostWrite_U64((u64)CEXIIPL::GetGCTime() * (u64)40500000,
0x800030D8); // Preset time base ticks
// HIO checks this
// PowerPC::HostWrite_U16(0x8200, 0x000030e6); // Console type
HLE::Patch(0x81300000, "OSReport"); // HLE OSReport for Apploader
if (!DVDInterface::VolumeIsValid())
return false;
// Load Apploader to Memory - The apploader is hardcoded to begin at 0x2440 on the disc,
// but the size can differ between discs. Compare with YAGCD chap 13.
const DiscIO::IVolume& volume = DVDInterface::GetVolume();
const u32 apploader_offset = 0x2440;
u32 apploader_entry, apploader_size, apploader_trailer;
if (skipAppLoader || !volume.ReadSwapped(apploader_offset + 0x10, &apploader_entry, false) ||
!volume.ReadSwapped(apploader_offset + 0x14, &apploader_size, false) ||
!volume.ReadSwapped(apploader_offset + 0x18, &apploader_trailer, false) ||
apploader_entry == (u32)-1 || apploader_size + apploader_trailer == (u32)-1)
{
INFO_LOG(BOOT, "GC BS2: Not running apploader!");
return false;
}
DVDRead(apploader_offset + 0x20, 0x01200000, apploader_size + apploader_trailer, false);
// Setup pointers like real BS2 does
if (SConfig::GetInstance().bNTSC)
{
PowerPC::ppcState.gpr[1] = 0x81566550; // StackPointer, used to be set to 0x816ffff0
PowerPC::ppcState.gpr[2] = 0x81465cc0; // Global pointer to Small Data Area 2 Base (haven't
// seen anything use it...meh)
PowerPC::ppcState.gpr[13] =
0x81465320; // Global pointer to Small Data Area Base (Luigi's Mansion's apploader uses it)
}
else
{
PowerPC::ppcState.gpr[1] = 0x815edca8;
PowerPC::ppcState.gpr[2] = 0x814b5b20;
PowerPC::ppcState.gpr[13] = 0x814b4fc0;
}
// TODO - Make Apploader(or just RunFunction()) debuggable!!!
// Call iAppLoaderEntry.
DEBUG_LOG(MASTER_LOG, "Call iAppLoaderEntry");
u32 iAppLoaderFuncAddr = 0x80003100;
PowerPC::ppcState.gpr[3] = iAppLoaderFuncAddr + 0;
PowerPC::ppcState.gpr[4] = iAppLoaderFuncAddr + 4;
PowerPC::ppcState.gpr[5] = iAppLoaderFuncAddr + 8;
RunFunction(apploader_entry);
u32 iAppLoaderInit = PowerPC::Read_U32(iAppLoaderFuncAddr + 0);
u32 iAppLoaderMain = PowerPC::Read_U32(iAppLoaderFuncAddr + 4);
u32 iAppLoaderClose = PowerPC::Read_U32(iAppLoaderFuncAddr + 8);
// iAppLoaderInit
DEBUG_LOG(MASTER_LOG, "Call iAppLoaderInit");
PowerPC::ppcState.gpr[3] = 0x81300000;
RunFunction(iAppLoaderInit);
// iAppLoaderMain - Here we load the apploader, the DOL (the exe) and the FST (filesystem).
// To give you an idea about where the stuff is located on the disc take a look at yagcd
// ch 13.
DEBUG_LOG(MASTER_LOG, "Call iAppLoaderMain");
do
{
PowerPC::ppcState.gpr[3] = 0x81300004;
PowerPC::ppcState.gpr[4] = 0x81300008;
PowerPC::ppcState.gpr[5] = 0x8130000c;
RunFunction(iAppLoaderMain);
u32 iRamAddress = PowerPC::Read_U32(0x81300004);
u32 iLength = PowerPC::Read_U32(0x81300008);
u32 iDVDOffset = PowerPC::Read_U32(0x8130000c);
INFO_LOG(MASTER_LOG, "DVDRead: offset: %08x memOffset: %08x length: %i", iDVDOffset,
iRamAddress, iLength);
DVDRead(iDVDOffset, iRamAddress, iLength, false);
} while (PowerPC::ppcState.gpr[3] != 0x00);
// iAppLoaderClose
DEBUG_LOG(MASTER_LOG, "call iAppLoaderClose");
RunFunction(iAppLoaderClose);
// return
PC = PowerPC::ppcState.gpr[3];
// Load patches
PatchEngine::LoadPatches();
// If we have any patches that need to be applied very early, here's a good place
PatchEngine::ApplyFramePatches();
return true;
}
// __________________________________________________________________________________________________
// Wii Bootstrap 2 HLE:
// copy the apploader to 0x81200000
// execute the apploader
bool CBoot::EmulatedBS2_Wii()
{
INFO_LOG(BOOT, "Faking Wii BS2...");
// Setup Wii memory
DiscIO::Country country_code = DiscIO::Country::COUNTRY_UNKNOWN;
if (DVDInterface::VolumeIsValid())
country_code = DVDInterface::GetVolume().GetCountry();
if (SetupWiiMemory(country_code) == false)
return false;
// Execute the apploader
bool apploaderRan = false;
if (DVDInterface::VolumeIsValid() &&
DVDInterface::GetVolume().GetVolumeType() == DiscIO::Platform::WII_DISC)
{
// This is some kind of consistency check that is compared to the 0x00
// values as the game boots. This location keeps the 4 byte ID for as long
// as the game is running. The 6 byte ID at 0x00 is overwritten sometime
// after this check during booting.
DVDRead(0, 0x3180, 4, true);
// Set up MSR and the BAT SPR registers.
UReg_MSR& m_MSR = ((UReg_MSR&)PowerPC::ppcState.msr);
m_MSR.FP = 1;
m_MSR.DR = 1;
m_MSR.IR = 1;
m_MSR.EE = 1;
PowerPC::ppcState.spr[SPR_IBAT0U] = 0x80001fff;
PowerPC::ppcState.spr[SPR_IBAT0L] = 0x00000002;
PowerPC::ppcState.spr[SPR_IBAT4U] = 0x90001fff;
PowerPC::ppcState.spr[SPR_IBAT4L] = 0x10000002;
PowerPC::ppcState.spr[SPR_DBAT0U] = 0x80001fff;
PowerPC::ppcState.spr[SPR_DBAT0L] = 0x00000002;
PowerPC::ppcState.spr[SPR_DBAT1U] = 0xc0001fff;
PowerPC::ppcState.spr[SPR_DBAT1L] = 0x0000002a;
PowerPC::ppcState.spr[SPR_DBAT4U] = 0x90001fff;
PowerPC::ppcState.spr[SPR_DBAT4L] = 0x10000002;
PowerPC::ppcState.spr[SPR_DBAT5U] = 0xd0001fff;
PowerPC::ppcState.spr[SPR_DBAT5L] = 0x1000002a;
Memory::Write_U32(0x4c000064, 0x00000300); // Write default DSI Handler: rfi
Memory::Write_U32(0x4c000064, 0x00000800); // Write default FPU Handler: rfi
Memory::Write_U32(0x4c000064, 0x00000C00); // Write default Syscall Handler: rfi
HLE::Patch(0x81300000, "OSReport"); // HLE OSReport for Apploader
PowerPC::ppcState.gpr[1] = 0x816ffff0; // StackPointer
const u32 apploader_offset = 0x2440; // 0x1c40;
// Load Apploader to Memory
const DiscIO::IVolume& volume = DVDInterface::GetVolume();
u32 apploader_entry, apploader_size;
if (!volume.ReadSwapped(apploader_offset + 0x10, &apploader_entry, true) ||
!volume.ReadSwapped(apploader_offset + 0x14, &apploader_size, true) ||
apploader_entry == (u32)-1 || apploader_size == (u32)-1)
{
ERROR_LOG(BOOT, "Invalid apploader. Probably your image is corrupted.");
return false;
}
DVDRead(apploader_offset + 0x20, 0x01200000, apploader_size, true);
// call iAppLoaderEntry
DEBUG_LOG(BOOT, "Call iAppLoaderEntry");
u32 iAppLoaderFuncAddr = 0x80004000;
PowerPC::ppcState.gpr[3] = iAppLoaderFuncAddr + 0;
PowerPC::ppcState.gpr[4] = iAppLoaderFuncAddr + 4;
PowerPC::ppcState.gpr[5] = iAppLoaderFuncAddr + 8;
RunFunction(apploader_entry);
u32 iAppLoaderInit = PowerPC::Read_U32(iAppLoaderFuncAddr + 0);
u32 iAppLoaderMain = PowerPC::Read_U32(iAppLoaderFuncAddr + 4);
u32 iAppLoaderClose = PowerPC::Read_U32(iAppLoaderFuncAddr + 8);
// iAppLoaderInit
DEBUG_LOG(BOOT, "Run iAppLoaderInit");
PowerPC::ppcState.gpr[3] = 0x81300000;
RunFunction(iAppLoaderInit);
// Let the apploader load the exe to memory. At this point I get an unknown IPC command
// (command zero) when I load Wii Sports or other games a second time. I don't notice
// any side effects however. It's a little disconcerting however that Start after Stop
// behaves differently than the first Start after starting Dolphin. It means something
// was not reset correctly.
DEBUG_LOG(BOOT, "Run iAppLoaderMain");
do
{
PowerPC::ppcState.gpr[3] = 0x81300004;
PowerPC::ppcState.gpr[4] = 0x81300008;
PowerPC::ppcState.gpr[5] = 0x8130000c;
RunFunction(iAppLoaderMain);
u32 iRamAddress = PowerPC::Read_U32(0x81300004);
u32 iLength = PowerPC::Read_U32(0x81300008);
u32 iDVDOffset = PowerPC::Read_U32(0x8130000c) << 2;
INFO_LOG(BOOT, "DVDRead: offset: %08x memOffset: %08x length: %i", iDVDOffset,
iRamAddress, iLength);
DVDRead(iDVDOffset, iRamAddress, iLength, true);
} while (PowerPC::ppcState.gpr[3] != 0x00);
// iAppLoaderClose
DEBUG_LOG(BOOT, "Run iAppLoaderClose");
RunFunction(iAppLoaderClose);
apploaderRan = true;
// Pass the "#002 check"
// Apploader writes the IOS version and revision here, we copy it
// Fake IOSv9 r2.4 if no version is found (elf loading)
u32 firmwareVer = PowerPC::Read_U32(0x80003188);
PowerPC::Write_U32(firmwareVer ? firmwareVer : 0x00090204, 0x80003140);
// Load patches and run startup patches
PatchEngine::LoadPatches();
// return
PC = PowerPC::ppcState.gpr[3];
}
return apploaderRan;
}
bool CBoot::SetupWiiMemory(DiscIO::Country country)
{
static const CountrySetting SETTING_EUROPE = {"EUR", "PAL", "EU", "LE"};
static const CountrySetting SETTING_USA = {"USA", "NTSC", "US", "LU"};
static const CountrySetting SETTING_JAPAN = {"JPN", "NTSC", "JP", "LJ"};
static const CountrySetting SETTING_KOREA = {"KOR", "NTSC", "KR", "LKH"};
static const std::map<DiscIO::Country, const CountrySetting> country_settings = {
{DiscIO::Country::COUNTRY_EUROPE, SETTING_EUROPE},
{DiscIO::Country::COUNTRY_USA, SETTING_USA},
{DiscIO::Country::COUNTRY_JAPAN, SETTING_JAPAN},
{DiscIO::Country::COUNTRY_KOREA, SETTING_KOREA},
// TODO: Determine if Taiwan have their own specific settings.
// Also determine if there are other specific settings
// for other countries.
{DiscIO::Country::COUNTRY_TAIWAN, SETTING_JAPAN}};
auto entryPos = country_settings.find(country);
const CountrySetting& country_setting =
(entryPos != country_settings.end()) ?
entryPos->second :
(SConfig::GetInstance().bNTSC ?
SETTING_USA :
SETTING_EUROPE); // default to USA or EUR depending on game's video mode
SettingsHandler gen;
std::string serno;
std::string settings_Filename(
Common::GetTitleDataPath(TITLEID_SYSMENU, Common::FROM_SESSION_ROOT) + WII_SETTING);
if (File::Exists(settings_Filename))
{
File::IOFile settingsFileHandle(settings_Filename, "rb");
if (settingsFileHandle.ReadBytes((void*)gen.GetData(), SettingsHandler::SETTINGS_SIZE))
{
gen.Decrypt();
serno = gen.GetValue("SERNO");
gen.Reset();
}
File::Delete(settings_Filename);
}
if (serno.empty() || serno == "000000000")
{
if (Core::g_want_determinism)
serno = "123456789";
else
serno = gen.generateSerialNumber();
INFO_LOG(BOOT, "No previous serial number found, generated one instead: %s", serno.c_str());
}
else
{
INFO_LOG(BOOT, "Using serial number: %s", serno.c_str());
}
std::string model = "RVL-001(" + country_setting.area + ")";
gen.AddSetting("AREA", country_setting.area);
gen.AddSetting("MODEL", model);
gen.AddSetting("DVD", "0");
gen.AddSetting("MPCH", "0x7FFE");
gen.AddSetting("CODE", country_setting.code);
gen.AddSetting("SERNO", serno);
gen.AddSetting("VIDEO", country_setting.video);
gen.AddSetting("GAME", country_setting.game);
File::CreateFullPath(settings_Filename);
{
File::IOFile settingsFileHandle(settings_Filename, "wb");
if (!settingsFileHandle.WriteBytes(gen.GetData(), SettingsHandler::SETTINGS_SIZE))
{
PanicAlertT("SetupWiiMemory: Can't create setting.txt file");
return false;
}
// Write the 256 byte setting.txt to memory.
Memory::CopyToEmu(0x3800, gen.GetData(), SettingsHandler::SETTINGS_SIZE);
}
INFO_LOG(BOOT, "Setup Wii Memory...");
/*
Set hardcoded global variables to Wii memory. These are partly collected from
WiiBrew. These values are needed for the games to function correctly. A few
values in this region will also be placed here by the game as it boots.
They are:
0x80000038 Start of FST
0x8000003c Size of FST Size
0x80000060 Copyright code
*/
// When booting a WAD or the system menu, there will probably not be a disc inserted
if (DVDInterface::VolumeIsValid())
DVDRead(0x00000000, 0x00000000, 0x20, false); // Game Code
Memory::Write_U32(0x0D15EA5E, 0x00000020); // Another magic word
Memory::Write_U32(0x00000001, 0x00000024); // Unknown
Memory::Write_U32(Memory::REALRAM_SIZE, 0x00000028); // MEM1 size 24MB
Memory::Write_U32(0x00000023, 0x0000002c); // Production Board Model
Memory::Write_U32(0x00000000, 0x00000030); // Init
Memory::Write_U32(0x817FEC60, 0x00000034); // Init
// 38, 3C should get start, size of FST through apploader
Memory::Write_U32(0x38a00040, 0x00000060); // Exception init
Memory::Write_U32(0x8008f7b8, 0x000000e4); // Thread Init
Memory::Write_U32(Memory::REALRAM_SIZE, 0x000000f0); // "Simulated memory size" (debug mode?)
Memory::Write_U32(0x8179b500, 0x000000f4); // __start
Memory::Write_U32(0x0e7be2c0, 0x000000f8); // Bus speed
Memory::Write_U32(0x2B73A840, 0x000000fc); // CPU speed
Memory::Write_U16(0x0000, 0x000030e6); // Console type
Memory::Write_U32(0x00000000, 0x000030c0); // EXI
Memory::Write_U32(0x00000000, 0x000030c4); // EXI
Memory::Write_U32(0x00000000, 0x000030dc); // Time
Memory::Write_U32(0x00000000, 0x000030d8); // Time
Memory::Write_U16(0x8201, 0x000030e6); // Dev console / debug capable
Memory::Write_U32(0x00000000, 0x000030f0); // Apploader
Memory::Write_U32(0x01800000, 0x00003100); // BAT
Memory::Write_U32(0x01800000, 0x00003104); // BAT
Memory::Write_U32(0x00000000, 0x0000310c); // Init
Memory::Write_U32(0x8179d500, 0x00003110); // Init
Memory::Write_U32(0x04000000, 0x00003118); // Unknown
Memory::Write_U32(0x04000000, 0x0000311c); // BAT
Memory::Write_U32(0x93400000, 0x00003120); // BAT
Memory::Write_U32(0x90000800, 0x00003124); // Init - MEM2 low
Memory::Write_U32(0x93ae0000, 0x00003128); // Init - MEM2 high
Memory::Write_U32(0x93ae0000, 0x00003130); // IOS MEM2 low
Memory::Write_U32(0x93b00000, 0x00003134); // IOS MEM2 high
Memory::Write_U32(0x00000012, 0x00003138); // Console type
// 40 is copied from 88 after running apploader
Memory::Write_U32(0x00090204, 0x00003140); // IOS revision (IOS9, v2.4)
Memory::Write_U32(0x00062507, 0x00003144); // IOS date in USA format (June 25, 2007)
Memory::Write_U16(0x0113, 0x0000315e); // Apploader
Memory::Write_U32(0x0000FF16, 0x00003158); // DDR ram vendor code
Memory::Write_U32(0x00000000, 0x00003160); // Init semaphore (sysmenu waits for this to clear)
Memory::Write_U32(0x00090204, 0x00003188); // Expected IOS revision
Memory::Write_U8(0x80, 0x0000315c); // OSInit
Memory::Write_U16(0x0000, 0x000030e0); // PADInit
Memory::Write_U32(0x80000000, 0x00003184); // GameID Address
// Fake the VI Init of the IPL
Memory::Write_U32(SConfig::GetInstance().bNTSC ? 0 : 1, 0x000000CC);
// Clear exception handler. Why? Don't we begin with only zeros?
for (int i = 0x3000; i <= 0x3038; i += 4)
{
Memory::Write_U32(0x00000000, i);
}
return true;
}
